SaleB

Seagate Z300TT84_smartctl_-a

Jun 22nd, 2023
1,086
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 5.68 KB | History | 0 0
  1. smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.102-1-pve] (local build)
  2. Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Seagate Desktop HDD.15
  6. Device Model:     ST4000DM000-1CD168
  7. Serial Number:    Z300TT84
  8. LU WWN Device Id: 5 000c50 064c6db97
  9. Firmware Version: CC43
  10. User Capacity:    4,000,787,030,016 bytes [4.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    5900 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is:    Thu Apr 20 16:56:38 2023 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x82) Offline data collection activity
  26.                     was completed without error.
  27.                     Auto Offline Data Collection: Enabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                     without error or no self-test has ever
  30.                     been run.
  31. Total time to complete Offline
  32. data collection:        (  602) seconds.
  33. Offline data collection
  34. capabilities:            (0x7b) SMART execute Offline immediate.
  35.                     Auto Offline data collection on/off support.
  36.                     Suspend Offline collection upon new
  37.                     command.
  38.                     Offline surface scan supported.
  39.                     Self-test supported.
  40.                     Conveyance Self-test supported.
  41.                     Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                     power-saving mode.
  44.                     Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                     General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:    (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:    ( 520) minutes.
  51. Conveyance self-test routine
  52. recommended polling time:    (   2) minutes.
  53. SCT capabilities:          (0x1085) SCT Status supported.
  54.  
  55. SMART Attributes Data Structure revision number: 10
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  58.   1 Raw_Read_Error_Rate     0x000f   114   099   006    Pre-fail  Always       -       58751608
  59.   3 Spin_Up_Time            0x0003   093   092   000    Pre-fail  Always       -       0
  60.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       169
  61.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  62.   7 Seek_Error_Rate         0x000f   069   060   030    Pre-fail  Always       -       8724930
  63.   9 Power_On_Hours          0x0032   014   014   000    Old_age   Always       -       76097
  64.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  65.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       160
  66. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  67. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  68. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
  69. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
  70. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
  71. 190 Airflow_Temperature_Cel 0x0022   070   048   045    Old_age   Always       -       30 (Min/Max 24/30)
  72. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  73. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       94
  74. 193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       954936
  75. 194 Temperature_Celsius     0x0022   030   052   000    Old_age   Always       -       30 (0 20 0 0 0)
  76. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  77. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
  78. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
  79. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       12947h+53m+37.477s
  80. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       34490203650
  81. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       45334938120
  82.  
  83. SMART Error Log Version: 1
  84. No Errors Logged
  85.  
  86. SMART Self-test log structure revision number 1
  87. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  88. # 1  Short offline       Completed without error       00%     10561         -
  89. # 2  Conveyance offline  Completed without error       00%     10561         -
  90. # 3  Short offline       Completed without error       00%     10561         -
  91. # 4  Short offline       Completed without error       00%     40574         -
  92. # 5  Short offline       Completed without error       00%     23755         -
  93. # 6  Conveyance offline  Aborted by host               90%       339         -
  94.  
  95. SMART Selective self-test log data structure revision number 1
  96.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  97.     1        0        0  Not_testing
  98.     2        0        0  Not_testing
  99.     3        0        0  Not_testing
  100.     4        0        0  Not_testing
  101.     5        0        0  Not_testing
  102. Selective self-test flags (0x0):
  103.   After scanning selected spans, do NOT read-scan remainder of disk.
  104. If Selective self-test is pending on power-up, resume after 0 minute delay.
  105.  
  106.  
Advertisement
Add Comment
Please, Sign In to add comment