Advertisement
Guest User

Untitled

a guest
Jan 28th, 2022
42
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.90 KB | None | 0 0
  1. U-Boot TPL 2020.07 (Oct 28 2021 - 10:29:43)
  2. Board: rev0a
  3. Channel 0: LPDDR4, 50MHz
  4. BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  5. Channel 1: LPDDR4, 50MHz
  6. BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  7. 256B stride
  8. 256B stride
  9. lpddr4_set_rate: change freq to 400000000 mhz 0, 1
  10. lpddr4_set_rate: change freq to 800000000 mhz 1, 0
  11. Trying to boot from BOOTROM
  12. Returning to boot ROM...
  13.  
  14. U-Boot SPL 2020.07 (Oct 28 2021 - 10:29:43 +0300)
  15. Trying to boot from MMC1
  16.  
  17.  
  18. U-Boot 2020.07 (Oct 28 2021 - 10:29:43 +0300)
  19.  
  20. SoC: Rockchip rk3399
  21. Reset cause: POR
  22. Model: FriendlyElec NanoPi R4S
  23. DRAM: 3.9 GiB
  24. PMIC: RK808
  25. MMC: mmc@fe320000: 1
  26. Loading Environment from MMC... MMC Device 0 not found
  27. *** Warning - No MMC card found, using default environment
  28.  
  29. In: serial@ff1a0000
  30. Out: serial@ff1a0000
  31. Err: serial@ff1a0000
  32. Model: FriendlyElec NanoPi R4S
  33. Net: eth0: ethernet@fe300000
  34. starting USB...
  35. Bus usb@fe380000: USB EHCI 1.00
  36. Bus usb@fe3c0000: USB EHCI 1.00
  37. Bus dwc3: Register 2000140 NbrPorts 2
  38. Starting the controller
  39. USB XHCI 1.10
  40. Bus dwc3: Register 2000140 NbrPorts 2
  41. Starting the controller
  42. USB XHCI 1.10
  43. scanning bus usb@fe380000 for devices... 1 USB Device(s) found
  44. scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
  45. scanning bus dwc3 for devices... 1 USB Device(s) found
  46. scanning bus dwc3 for devices... 1 USB Device(s) found
  47. scanning usb for storage devices... 0 Storage Device(s) found
  48. Hit any key to stop autoboot: 0
  49.  
  50. Device 0: unknown device
  51. switch to partitions #0, OK
  52. mmc1 is current device
  53. Scanning mmc 1:1...
  54. Found U-Boot script /boot.scr
  55. 2515 bytes read in 4 ms (613.3 KiB/s)
  56. ## Executing script at 00500000
  57. 113 bytes read in 4 ms (27.3 KiB/s)
  58. Load uEnv.txt...
  59. ...
  60. Set console to ttyS2,1500000n8
  61. 27210240 bytes read in 1159 ms (22.4 MiB/s)
  62. 56890 bytes read in 10 ms (5.4 MiB/s)
  63.  
  64. 7683916 bytes read in 330 ms (22.2 MiB/s)
  65. Ramdisk loaded...
  66. ## Loading init Ramdisk from Legacy Image at 06000000 ...
  67. Image Name:
  68. Image Type: AArch64 Linux RAMDisk Image (lzma compressed)
  69. Data Size: 7683852 Bytes = 7.3 MiB
  70. Load Address: 00000000
  71. Entry Point: 00000000
  72. Verifying Checksum ... OK
  73. ## Flattened Device Tree blob at 01f00000
  74. Booting using the fdt blob at 0x1f00000
  75. Loading Ramdisk to f57c7000, end f5f1af0c ... OK
  76. Loading Device Tree to 00000000f57b6000, end 00000000f57c6e39 ... OK
  77.  
  78. Starting kernel ...
  79.  
  80. Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  81. Linux version 5.15.6-ipfire (root@arm64-01.dub.ipfire.org) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Mon Dec 20 22:39:23 GMT 2021
  82. Machine model: FriendlyElec NanoPi R4S
  83. efi: UEFI not found.
  84. Zone ranges:
  85. DMA [mem 0x0000000000200000-0x00000000f7ffffff]
  86. DMA32 empty
  87. Normal empty
  88. Movable zone start for each node
  89. Early memory node ranges
  90. node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  91. Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  92. cma: Reserved 24 MiB at 0x00000000f0000000
  93. psci: probing for conduit method from DT.
  94. psci: PSCIv1.1 detected in firmware.
  95. psci: Using standard PSCI v0.2 function IDs
  96. psci: MIGRATE_INFO_TYPE not supported.
  97. psci: SMC Calling Convention v1.2
  98. percpu: Embedded 26 pages/cpu s67928 r8192 d30376 u106496
  99. Detected VIPT I-cache on CPU0
  100. CPU features: detected: GIC system register CPU interface
  101. CPU features: detected: ARM erratum 845719
  102. Built 1 zonelists, mobility grouping on. Total pages: 999432
  103. Kernel command line: console=ttyS2,1500000n8 root=UUID=8923c8ba-569c-4b18-a2f9-98ba5dd6674a rootwait
  104. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  105. Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  106. mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
  107. Memory: 3921044K/4061184K available (13376K kernel code, 2636K rwdata, 5176K rodata, 5248K init, 780K bss, 115564K reserved, 24576K cma-reserved)
  108. random: get_random_u64 called from __kmem_cache_create+0x2c/0x770 with crng_init=0
  109. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  110. ftrace: allocating 37895 entries in 149 pages
  111. ftrace: allocated 149 pages with 4 groups
  112. trace event string verifier disabled
  113. rcu: Hierarchical RCU implementation.
  114. rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  115. Rude variant of Tasks RCU enabled.
  116. rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
  117. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  118. NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  119. GICv3: GIC: Using split EOI/Deactivate mode
  120. GICv3: 256 SPIs implemented
  121. GICv3: 0 Extended SPIs implemented
  122. GICv3: Distributor has no Range Selector support
  123. Root IRQ handler: gic_handle_irq
  124. GICv3: 16 PPIs implemented
  125. GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  126. ITS [mem 0xfee20000-0xfee3ffff]
  127. ITS@0x00000000fee20000: allocated 65536 Devices @380000 (flat, esz 8, psz 64K, shr 0)
  128. ITS: using cache flushing for cmd queue
  129. GICv3: using LPI property table @0x0000000000350000
  130. GIC: using cache flushing for LPI property table
  131. GICv3: CPU0: using allocated LPI pending table @0x0000000000360000
  132. GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  133. GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  134. kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
  135. arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  136. clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  137. sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  138. Console: colour dummy device 80x25
  139. Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  140. pid_max: default: 32768 minimum: 301
  141. LSM: Security Framework initializing
  142. Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  143. Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  144. rcu: Hierarchical SRCU implementation.
  145. Platform MSI: interrupt-controller@fee20000 domain created
  146. PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  147. EFI services will not be available.
  148. smp: Bringing up secondary CPUs ...
  149. Detected VIPT I-cache on CPU1
  150. GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  151. GICv3: CPU1: using allocated LPI pending table @0x0000000000370000
  152. CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  153. Detected VIPT I-cache on CPU2
  154. GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  155. GICv3: CPU2: using allocated LPI pending table @0x0000000000800000
  156. CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  157. Detected VIPT I-cache on CPU3
  158. GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  159. GICv3: CPU3: using allocated LPI pending table @0x0000000000810000
  160. CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  161. CPU features: detected: Spectre-v2
  162. CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  163. Detected PIPT I-cache on CPU4
  164. GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  165. GICv3: CPU4: using allocated LPI pending table @0x0000000000820000
  166. CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  167. Detected PIPT I-cache on CPU5
  168. GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  169. GICv3: CPU5: using allocated LPI pending table @0x0000000000830000
  170. CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  171. smp: Brought up 1 node, 6 CPUs
  172. SMP: Total of 6 processors activated.
  173. CPU features: detected: 32-bit EL0 Support
  174. CPU features: detected: CRC32 instructions
  175. CPU: All CPU(s) started at EL2
  176. alternatives: patching kernel code
  177. devtmpfs: initialized
  178. Registered cp15_barrier emulation handler
  179. Registered setend emulation handler
  180. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  181. futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  182. pinctrl core: initialized pinctrl subsystem
  183. DMI not present or invalid.
  184. NET: Registered PF_NETLINK/PF_ROUTE protocol family
  185. DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  186. DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  187. DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  188. thermal_sys: Registered thermal governor 'fair_share'
  189. thermal_sys: Registered thermal governor 'step_wise'
  190. thermal_sys: Registered thermal governor 'user_space'
  191. cpuidle: using governor menu
  192. hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  193. ASID allocator initialised with 65536 entries
  194. Serial: AMBA PL011 UART driver
  195. platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop
  196. platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop
  197. rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000
  198. rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000
  199. rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000
  200. rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000
  201. rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000
  202. cryptd: max_cpu_qlen set to 1000
  203. ACPI: Interpreter disabled.
  204. iommu: Default domain type: Translated
  205. iommu: DMA domain TLB invalidation policy: strict mode
  206. vgaarb: loaded
  207. SCSI subsystem initialized
  208. usbcore: registered new interface driver usbfs
  209. usbcore: registered new interface driver hub
  210. usbcore: registered new device driver usb
  211. clocksource: Switched to clocksource arch_sys_counter
  212. VFS: Disk quotas dquot_6.6.0
  213. VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  214. pnp: PnP ACPI: disabled
  215. NET: Registered PF_INET protocol family
  216. IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  217. tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  218. TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  219. TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  220. TCP: Hash tables configured (established 32768 bind 32768)
  221. UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  222. UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  223. NET: Registered PF_UNIX/PF_LOCAL protocol family
  224. PCI: CLS 0 bytes, default 64
  225. Trying to unpack rootfs image as initramfs...
  226. hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  227. hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  228. Initialise system trusted keyrings
  229. workingset: timestamp_bits=46 max_order=20 bucket_order=0
  230. NET: Registered PF_ALG protocol family
  231. Key type asymmetric registered
  232. Asymmetric key parser 'x509' registered
  233. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  234. io scheduler mq-deadline registered
  235. usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  236. usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  237. usb usb3: Product: Generic Platform OHCI controller
  238. usb usb3: Manufacturer: Linux 5.15.6-ipfire ohci_hcd
  239. usb usb3: SerialNumber: fe3a0000.usb
  240. hub 3-0:1.0: USB hub found
  241. hub 3-0:1.0: 1 port detected
  242. rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled
  243. ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  244. ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  245. ohci-platform fe3e0000.usb: irq 36, io mem 0xfe3e0000
  246. usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  247. usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  248. usb usb4: Product: Generic Platform OHCI controller
  249. usb usb4: Manufacturer: Linux 5.15.6-ipfire ohci_hcd
  250. usb usb4: SerialNumber: fe3e0000.usb
  251. hub 4-0:1.0: USB hub found
  252. hub 4-0:1.0: 1 port detected
  253. uhci_hcd: USB Universal Host Controller Interface driver
  254. usbcore: registered new interface driver uas
  255. usbcore: registered new interface driver usb-storage
  256. mousedev: PS/2 mouse device common for all mice
  257. device-mapper: uevent: version 1.0.3
  258. device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
  259. sdhci: Secure Digital Host Controller Interface driver
  260. sdhci: Copyright(c) Pierre Ossman
  261. Synopsys Designware Multimedia Card Interface Driver
  262. sdhci-pltfm: SDHCI platform and OF driver helper
  263. ledtrig-cpu: registered to indicate activity on CPUs
  264. SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  265. hid: raw HID events driver (C) Jiri Kosina
  266. usbcore: registered new interface driver usbhid
  267. usbhid: USB HID core driver
  268. Initializing XFRM netlink socket
  269. NET: Registered PF_INET6 protocol family
  270. Freeing initrd memory: 7500K
  271. Segment Routing with IPv6
  272. In-situ OAM (IOAM) with IPv6
  273. NET: Registered PF_PACKET protocol family
  274. Bridge firewalling registered
  275. Key type dns_resolver registered
  276. registered taskstats version 1
  277. Loading compiled-in X.509 certificates
  278. Loaded X.509 cert 'IPFire.org: Build time autogenerated kernel key: 380ab4d70bc34f8305c33f0d6b80e967585f962a'
  279. vcc5v0_sys: supplied by vdd_5v
  280. vcc3v3_sys: supplied by vcc5v0_sys
  281. vcc3v0_sd: supplied by vcc3v3_sys
  282. rk808 0-001b: chip id: 0x0
  283. rk808-regulator rk808-regulator: there is no dvs0 gpio
  284. rk808-regulator rk808-regulator: there is no dvs1 gpio
  285. vdd_center: supplied by vcc3v3_sys
  286. vdd_cpu_l: supplied by vcc3v3_sys
  287. vcc_ddr: supplied by vcc3v3_sys
  288. vcc_1v8: supplied by vcc3v3_sys
  289. vcc1v8_cam: supplied by vcc3v3_sys
  290. vcc3v0_touch: supplied by vcc3v3_sys
  291. vcc1v8_pmupll: supplied by vcc3v3_sys
  292. vcc_sdio: supplied by vcc3v3_sys
  293. vcca3v0_codec: supplied by vcc3v3_sys
  294. vcc_1v5: supplied by vcc3v3_sys
  295. vcca1v8_codec: supplied by vcc3v3_sys
  296. vcc_3v0: supplied by vcc3v3_sys
  297. vcc3v3_s3: supplied by vcc3v3_sys
  298. vcc3v3_s0: supplied by vcc3v3_sys
  299. rk808-rtc rk808-rtc: registered as rtc0
  300. rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:20 UTC (1358499020)
  301. vcc1v8_s3: supplied by vcc_1v8
  302. dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
  303. vcca0v9_s3: supplied by vcc1v8_s3
  304. dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
  305. vcca1v8_s3: supplied by vcc1v8_s3
  306. dwmmc_rockchip fe320000.mmc: Version ID is 270a
  307. dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
  308. dwmmc_rockchip fe320000.mmc: Got CD GPIO
  309. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  310. mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  311. dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
  312. Freeing unused kernel memory: 5248K
  313. Checked W+X mappings: passed, no W+X pages found
  314. Run /init as init process
  315. random: fast init done
  316. mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  317. dracut: dracut-038
  318. dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 213
  319. mmc1: new ultra high speed SDR104 SDHC card at address aaaa
  320. mmcblk1: mmc1:aaaa SB16G 14.8 GiB
  321. mmcblk1: p1 p2 p3
  322. random: systemd-udevd: uninitialized urandom read (16 bytes read)
  323. random: systemd-udevd: uninitialized urandom read (16 bytes read)
  324. random: systemd-udevd: uninitialized urandom read (16 bytes read)
  325. udevd[242]: starting eudev-3.2.6
  326. EXT4-fs (mmcblk1p3): mounted filesystem without journal. Opts: (null). Quota mode: none.
  327. dracut: Checking ext4: /dev/disk/by-uuid/8923c8ba-569c-4b18-a2f9-98ba5dd6674a
  328. dracut: issuing e2fsck -a /dev/disk/by-uuid/8923c8ba-569c-4b18-a2f9-98ba5dd6674a
  329. dracut Warning: e2fsck returned with 1
  330. dracut Warning: e2fsck returned with 1
  331. dracut: /dev/disk/by-uuid/8923c8ba-569c-4b18-a2f9-98ba5dd6674a was not cleanly unmounted, check forced.
  332. dracut: /dev/disk/by-uuid/8923c8ba-569c-4b18-a2f9-98ba5dd6674a: 23072/951552 files (1.1% non-contiguous), 432578/3848502 blocks
  333. dracut: Mounting /dev/disk/by-uuid/8923c8ba-569c-4b18-a2f9-98ba5dd6674a with -o defaults
  334. EXT4-fs (mmcblk1p3): mounted filesystem without journal. Opts: (null). Quota mode: none.
  335. dracut: Mounted root filesystem /dev/mmcblk1p3
  336. dracut: Switching root
  337. INIT: version 2.27 booting
  338. INIT: No inittab.d directory found
  339. [ OK ] kernel-based file systems: /sys/fs/cgroup
  340. [ OK ]kernel runtime parameters...
  341. [ OK ]aarch64-kernel runtime parameters...
  342. IPFire v2.27 - www.ipfire.org
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement