API tools faq
paste
Guest User

May-1-dmesg

a guest
May 1st, 2024
133
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.44 KB | None | 0 0
raw download clone embed print report
  1. cakedayy@potato:~$ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  3. [ 0.000000] Linux version 6.1.87-15358-g9f51a48ea718 ([email protected]) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Apr 20 01:03:42 EDT 2024
  4. [ 0.000000] Machine model: Libre Computer AML-S905X-CC
  5. [ 0.000000] efi: EFI v2.100 by Das U-Boot
  6. [ 0.000000] efi: RTPROP=0x74e8c040 SMBIOS=0x74e8b000 RNG=0x6c727040 MEMRESERVE=0x6c726040
  7. [ 0.000000] random: crng init done
  8. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000058c00000, size 256 MiB
  9. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  10. [ 0.000000] Zone ranges:
  11. [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
  12. [ 0.000000] DMA32 empty
  13. [ 0.000000] Normal empty
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
  17. [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
  18. [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000052fffff]
  19. [ 0.000000] node 0: [mem 0x0000000005300000-0x000000000fffffff]
  20. [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
  21. [ 0.000000] node 0: [mem 0x0000000010200000-0x0000000074e8afff]
  22. [ 0.000000] node 0: [mem 0x0000000074e8b000-0x0000000074e8cfff]
  23. [ 0.000000] node 0: [mem 0x0000000074e8d000-0x0000000074e8dfff]
  24. [ 0.000000] node 0: [mem 0x0000000074e8e000-0x0000000074e8ffff]
  25. [ 0.000000] node 0: [mem 0x0000000074e90000-0x0000000074e90fff]
  26. [ 0.000000] node 0: [mem 0x0000000074e91000-0x0000000074e94fff]
  27. [ 0.000000] node 0: [mem 0x0000000074e95000-0x000000007deaffff]
  28. [ 0.000000] node 0: [mem 0x000000007deb0000-0x000000007debffff]
  29. [ 0.000000] node 0: [mem 0x000000007dec0000-0x000000007fe5afff]
  30. [ 0.000000] node 0: [mem 0x000000007fe5b000-0x000000007fffffff]
  31. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
  32. [ 0.000000] psci: probing for conduit method from DT.
  33. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  34. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  35. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  36. [ 0.000000] psci: SMC Calling Convention v1.1
  37. [ 0.000000] percpu: Embedded 30 pages/cpu s83816 r8192 d30872 u122880
  38. [ 0.000000] pcpu-alloc: s83816 r8192 d30872 u122880 alloc=30*4096
  39. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  40. [ 0.000000] Detected VIPT I-cache on CPU0
  41. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  42. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  43. [ 0.000000] CPU features: detected: ARM erratum 845719
  44. [ 0.000000] alternatives: applying boot alternatives
  45. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
  46. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.87-15358-g9f51a48ea718 root=UUID=29d512f7-4728-44f2-9070-cc9e4c3592bd ro noquiet splash vt.handoff=7
  47. [ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.1.87-15358-g9f51a48ea718", will be passed to user space.
  48. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  49. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  50. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  51. [ 0.000000] Memory: 1667032K/2097152K available (19520K kernel code, 3604K rwdata, 14656K rodata, 7744K init, 801K bss, 167976K reserved, 262144K cma-reserved)
  52. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  53. [ 0.000000] ftrace: allocating 61801 entries in 242 pages
  54. [ 0.000000] ftrace: allocated 242 pages with 5 groups
  55. [ 0.000000] trace event string verifier disabled
  56. [ 0.000000] Dynamic Preempt: full
  57. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  58. [ 0.000000] rcu: RCU event tracing is enabled.
  59. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  60. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  61. [ 0.000000] Rude variant of Tasks RCU enabled.
  62. [ 0.000000] Tracing variant of Tasks RCU enabled.
  63. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  64. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  65. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  66. [ 0.000000] Root IRQ handler: gic_handle_irq
  67. [ 0.000000] GIC: Using split EOI/Deactivate mode
  68. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  69. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  70. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  71. [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  72. [ 0.000635] Console: colour dummy device 80x25
  73. [ 0.001150] printk: console [tty0] enabled
  74. [ 0.001190] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  75. [ 0.001214] pid_max: default: 32768 minimum: 301
  76. [ 0.001313] LSM: Security Framework initializing
  77. [ 0.001339] Yama: becoming mindful.
  78. [ 0.001440] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  79. [ 0.001466] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  80. [ 0.002297] spectre-v4 mitigation disabled by command-line option
  81. [ 0.002872] cblist_init_generic: Setting adjustable number of callback queues.
  82. [ 0.002902] cblist_init_generic: Setting shift to 2 and lim to 1.
  83. [ 0.002974] cblist_init_generic: Setting adjustable number of callback queues.
  84. [ 0.002990] cblist_init_generic: Setting shift to 2 and lim to 1.
  85. [ 0.003064] cblist_init_generic: Setting adjustable number of callback queues.
  86. [ 0.003079] cblist_init_generic: Setting shift to 2 and lim to 1.
  87. [ 0.003252] rcu: Hierarchical SRCU implementation.
  88. [ 0.003265] rcu: Max phase no-delay instances is 1000.
  89. [ 0.004473] Remapping and enabling EFI services.
  90. [ 0.004826] smp: Bringing up secondary CPUs ...
  91. [ 0.005625] Detected VIPT I-cache on CPU1
  92. [ 0.005765] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  93. [ 0.006616] Detected VIPT I-cache on CPU2
  94. [ 0.006739] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  95. [ 0.007598] Detected VIPT I-cache on CPU3
  96. [ 0.007728] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  97. [ 0.007822] smp: Brought up 1 node, 4 CPUs
  98. [ 0.007891] SMP: Total of 4 processors activated.
  99. [ 0.007903] CPU features: detected: 32-bit EL0 Support
  100. [ 0.007913] CPU features: detected: 32-bit EL1 Support
  101. [ 0.007925] CPU features: detected: CRC32 instructions
  102. [ 0.008059] CPU: All CPU(s) started at EL2
  103. [ 0.008079] alternatives: applying system-wide alternatives
  104. [ 0.010085] devtmpfs: initialized
  105. [ 0.016388] Registered cp15_barrier emulation handler
  106. [ 0.016428] Registered setend emulation handler
  107. [ 0.016662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  108. [ 0.016694] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  109. [ 0.024167] pinctrl core: initialized pinctrl subsystem
  110. [ 0.024457] regulator-dummy: no parameters, enabled
  111. [ 0.024749] SMBIOS 3.0 present.
  112. [ 0.024779] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2023.07+ 07/01/2023
  113. [ 0.025186] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  114. [ 0.026346] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  115. [ 0.026664] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  116. [ 0.026847] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  117. [ 0.026942] audit: initializing netlink subsys (disabled)
  118. [ 0.027166] audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
  119. [ 0.028433] thermal_sys: Registered thermal governor 'fair_share'
  120. [ 0.028447] thermal_sys: Registered thermal governor 'step_wise'
  121. [ 0.028468] thermal_sys: Registered thermal governor 'power_allocator'
  122. [ 0.028550] cpuidle: using governor menu
  123. [ 0.028716] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  124. [ 0.028834] ASID allocator initialised with 32768 entries
  125. [ 0.041716] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  126. [ 0.041955] platform d0100000.vpu: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  127. [ 0.042022] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /soc/vpu@d0100000
  128. [ 0.043042] platform d0100000.vpu: Fixed dependency cycle(s) with /cvbs-connector
  129. [ 0.043121] platform cvbs-connector: Fixed dependency cycle(s) with /soc/vpu@d0100000
  130. [ 0.043387] platform c883a000.hdmi-tx: Fixed dependency cycle(s) with /hdmi-connector
  131. [ 0.043459] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi-tx@c883a000
  132. [ 0.045365] KASLR enabled
  133. [ 0.053383] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  134. [ 0.053416] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  135. [ 0.053430] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  136. [ 0.053441] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  137. [ 0.053453] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  138. [ 0.053465] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  139. [ 0.053477] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  140. [ 0.053489] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  141. [ 0.120376] raid6: neonx8 gen() 2254 MB/s
  142. [ 0.188452] raid6: neonx4 gen() 2212 MB/s
  143. [ 0.256531] raid6: neonx2 gen() 2126 MB/s
  144. [ 0.324621] raid6: neonx1 gen() 1815 MB/s
  145. [ 0.392685] raid6: int64x8 gen() 1415 MB/s
  146. [ 0.460763] raid6: int64x4 gen() 1571 MB/s
  147. [ 0.528844] raid6: int64x2 gen() 1398 MB/s
  148. [ 0.596931] raid6: int64x1 gen() 1036 MB/s
  149. [ 0.596944] raid6: using algorithm neonx8 gen() 2254 MB/s
  150. [ 0.664984] raid6: .... xor() 1648 MB/s, rmw enabled
  151. [ 0.664998] raid6: using neon recovery algorithm
  152. [ 0.665264] fbcon: Taking over console
  153. [ 0.665636] VCC_3V3: 3300 mV, enabled
  154. [ 0.665759] reg-fixed-voltage regulator-vcc_3v3: VCC_3V3 supplying 3300000uV
  155. [ 0.665878] VDDIO_AO18: 1800 mV, enabled
  156. [ 0.665963] reg-fixed-voltage regulator-vddio_ao18: VDDIO_AO18 supplying 1800000uV
  157. [ 0.666056] VDDIO_BOOT: will resolve supply early: vin
  158. [ 0.666063] reg-fixed-voltage regulator-vddio_boot: Looking up vin-supply from device tree
  159. [ 0.666075] VDDIO_BOOT: supplied by VCC_3V3
  160. [ 0.666082] VCC_3V3: could not add device link regulator.3: -ENOENT
  161. [ 0.666144] VDDIO_BOOT: 1800 mV, enabled
  162. [ 0.666229] reg-fixed-voltage regulator-vddio_boot: VDDIO_BOOT supplying 1800000uV
  163. [ 0.666682] iommu: Default domain type: Passthrough
  164. [ 0.667058] SCSI subsystem initialized
  165. [ 0.667236] libata version 3.00 loaded.
  166. [ 0.667460] usbcore: registered new interface driver usbfs
  167. [ 0.667518] usbcore: registered new interface driver hub
  168. [ 0.667558] usbcore: registered new device driver usb
  169. [ 0.668039] pps_core: LinuxPPS API ver. 1 registered
  170. [ 0.668053] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  171. [ 0.668078] PTP clock support registered
  172. [ 0.668204] EDAC MC: Ver: 3.0.0
  173. [ 0.669062] Registered efivars operations
  174. [ 0.669660] FPGA manager framework
  175. [ 0.669783] Advanced Linux Sound Architecture Driver Initialized.
  176. [ 0.670404] NetLabel: Initializing
  177. [ 0.670420] NetLabel: domain hash size = 128
  178. [ 0.670431] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  179. [ 0.670492] NetLabel: unlabeled traffic allowed by default
  180. [ 0.670886] clocksource: Switched to clocksource arch_sys_counter
  181. [ 0.671219] VFS: Disk quotas dquot_6.6.0
  182. [ 0.671279] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  183. [ 0.671420] FS-Cache: Loaded
  184. [ 0.677206] NET: Registered PF_INET protocol family
  185. [ 0.677409] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  186. [ 0.679131] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  187. [ 0.679231] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  188. [ 0.679266] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  189. [ 0.679391] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  190. [ 0.679788] TCP: Hash tables configured (established 16384 bind 16384)
  191. [ 0.680038] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
  192. [ 0.680131] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  193. [ 0.680184] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  194. [ 0.680362] NET: Registered PF_UNIX/PF_LOCAL protocol family
  195. [ 0.680853] RPC: Registered named UNIX socket transport module.
  196. [ 0.680886] RPC: Registered udp transport module.
  197. [ 0.680896] RPC: Registered tcp transport module.
  198. [ 0.680905] RPC: Registered tcp NFSv4.1 backchannel transport module.
  199. [ 0.680922] NET: Registered PF_XDP protocol family
  200. [ 0.680944] PCI: CLS 0 bytes, default 64
  201. [ 0.681156] Trying to unpack rootfs image as initramfs...
  202. [ 0.681817] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  203. [ 0.682393] kvm [1]: IPA Size Limit: 40 bits
  204. [ 0.685221] kvm [1]: vgic interrupt IRQ9
  205. [ 0.685358] kvm [1]: Hyp mode initialized successfully
  206. [ 1.165609] Initialise system trusted keyrings
  207. [ 1.165954] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  208. [ 1.172632] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  209. [ 1.173429] NFS: Registering the id_resolver key type
  210. [ 1.173482] Key type id_resolver registered
  211. [ 1.173494] Key type id_legacy registered
  212. [ 1.173581] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  213. [ 1.173596] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  214. [ 1.174622] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
  215. [ 1.176052] 9p: Installing v9fs 9p2000 file system support
  216. [ 1.213735] xor: measuring software checksum speed
  217. [ 1.217709] 8regs : 2520 MB/sec
  218. [ 1.221672] 32regs : 2521 MB/sec
  219. [ 1.225973] arm64_neon : 2318 MB/sec
  220. [ 1.226003] xor: using function: 32regs (2521 MB/sec)
  221. [ 1.226037] Key type asymmetric registered
  222. [ 1.226053] Asymmetric key parser 'x509' registered
  223. [ 1.245278] Freeing initrd memory: 57408K
  224. [ 1.260749] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  225. [ 1.260864] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  226. [ 1.261034] io scheduler mq-deadline registered
  227. [ 1.261051] io scheduler kyber registered
  228. [ 1.261222] io scheduler bfq registered
  229. [ 1.262044] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
  230. [ 1.279496] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
  231. [ 1.283935] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  232. [ 1.297162] loop: module loaded
  233. [ 1.297770] Loading iSCSI transport class v2.0-870.
  234. [ 1.298262] iscsi: registered transport (tcp)
  235. [ 1.299420] Rounding down aligned max_sectors from 4294967295 to 4294967288
  236. [ 1.299586] db_root: cannot open: /etc/target
  237. [ 1.302679] tun: Universal TUN/TAP device driver, 1.6
  238. [ 1.304538] VFIO - User Level meta-driver version: 0.3
  239. [ 1.306817] usbcore: registered new interface driver uas
  240. [ 1.306911] usbcore: registered new interface driver usb-storage
  241. [ 1.307937] i2c_dev: i2c /dev entries driver
  242. [ 1.312322] sdhci: Secure Digital Host Controller Interface driver
  243. [ 1.312356] sdhci: Copyright(c) Pierre Ossman
  244. [ 1.312656] Synopsys Designware Multimedia Card Interface Driver
  245. [ 1.313241] sdhci-pltfm: SDHCI platform and OF driver helper
  246. [ 1.314349] ledtrig-cpu: registered to indicate activity on CPUs
  247. [ 1.315655] meson-sm: secure-monitor enabled
  248. [ 1.316233] hid: raw HID events driver (C) Jiri Kosina
  249. [ 1.316365] usbcore: registered new interface driver usbhid
  250. [ 1.316379] usbhid: USB HID core driver
  251. [ 1.316773] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
  252. [ 1.318151] meson-saradc c1108680.adc: Looking up vref-supply from device tree
  253. [ 1.404710] NET: Registered PF_PACKET protocol family
  254. [ 1.406013] 9pnet: Installing 9P2000 support
  255. [ 1.406106] Key type dns_resolver registered
  256. [ 1.407145] registered taskstats version 1
  257. [ 1.407201] Loading compiled-in X.509 certificates
  258. [ 1.412530] zswap: loaded using pool zstd/z3fold
  259. [ 1.413775] Key type .fscrypt registered
  260. [ 1.413807] Key type fscrypt-provisioning registered
  261. [ 1.415430] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  262. [ 1.432493] phy phy-d0078020.phy.0: Looking up phy-supply from device tree
  263. [ 1.432512] phy phy-d0078020.phy.0: Looking up phy-supply property in node /soc/apb@d0000000/phy@78020 failed
  264. [ 1.436992] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
  265. [ 2.837869] printk: console [ttyAML0] enabled
  266. [ 2.843749] meson-drm d0100000.vpu: Queued 2 outputs on vpu
  267. [ 2.850742] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
  268. [ 2.854292] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
  269. [ 2.860472] meson8b-dwmac c9410000.ethernet: PTP uses main clock
  270. [ 2.868014] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  271. [ 2.873432] meson8b-dwmac c9410000.ethernet: DWMAC1000
  272. [ 2.878572] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
  273. [ 2.885988] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
  274. [ 2.893404] meson8b-dwmac c9410000.ethernet: COE Type 2
  275. [ 2.898577] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
  276. [ 2.905564] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
  277. [ 2.912025] meson8b-dwmac c9410000.ethernet: Normal descriptors
  278. [ 2.917814] meson8b-dwmac c9410000.ethernet: Ring mode enabled
  279. [ 2.923590] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  280. [ 2.937689] meson-gx-mmc d0074000.mmc: Looking up vmmc-supply from device tree
  281. [ 2.937997] meson-gx-mmc d0074000.mmc: Looking up vqmmc-supply from device tree
  282. [ 2.938192] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
  283. [ 2.940319] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
  284. [ 2.956816] HDMI_5V: 5000 mV, enabled
  285. [ 2.956960] reg-fixed-voltage regulator-hdmi-5v: HDMI_5V supplying 5000000uV
  286. [ 2.957182] VCC_CARD: 1800 <--> 3300 mV at 3300 mV, enabled
  287. [ 2.957586] phy phy-d0078000.phy.1: Looking up phy-supply from device tree
  288. [ 2.957608] HDMI_5V: could not add device link phy-d0078000.phy.1: -ENOENT
  289. [ 2.959562] meson-dw-hdmi c883a000.hdmi-tx: Looking up hdmi-supply from device tree
  290. [ 2.986968] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  291. [ 2.991968] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  292. [ 2.999318] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
  293. [ 3.007047] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
  294. [ 3.027016] Console: switching to colour frame buffer device 90x36
  295. [ 3.046773] mmc0: new HS200 MMC card at address 0001
  296. [ 3.047856] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  297. [ 3.051047] mmcblk0: p1 p2
  298. [ 3.051453] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
  299. [ 3.057418] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB
  300. [ 3.077302] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB
  301. [ 3.082020] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (240:0)
  302. [ 3.109231] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply from device tree
  303. [ 3.109263] dwc3-meson-g12a d0078080.usb: Looking up vbus-supply property in node /soc/usb@d0078080 failed
  304. [ 3.109502] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
  305. [ 3.109632] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
  306. [ 3.649360] dwc2 c9100000.usb: Looking up vusb_d-supply from device tree
  307. [ 3.649386] dwc2 c9100000.usb: Looking up vusb_d-supply property in node /soc/usb@d0078080/usb@c9100000 failed
  308. [ 3.649419] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
  309. [ 3.651241] dwc2 c9100000.usb: Looking up vusb_a-supply from device tree
  310. [ 3.651255] dwc2 c9100000.usb: Looking up vusb_a-supply property in node /soc/usb@d0078080/usb@c9100000 failed
  311. [ 3.651280] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
  312. [ 3.660594] dwc2 c9100000.usb: Looking up vbus-supply from device tree
  313. [ 3.660607] dwc2 c9100000.usb: Looking up vbus-supply property in node /soc/usb@d0078080/usb@c9100000 failed
  314. [ 3.660792] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  315. [ 3.673778] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  316. [ 3.678807] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  317. [ 3.683840] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports
  318. [ 3.689582] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000008002010010
  319. [ 3.701242] xhci-hcd xhci-hcd.1.auto: irq 29, io mem 0xc9000000
  320. [ 3.705091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  321. [ 3.715433] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  322. [ 3.719843] usb usb1: Product: xHCI Host Controller
  323. [ 3.724676] usb usb1: Manufacturer: Linux 6.1.87-15358-g9f51a48ea718 xhci-hcd
  324. [ 3.731806] usb usb1: SerialNumber: xhci-hcd.1.auto
  325. [ 3.737479] hub 1-0:1.0: USB hub found
  326. [ 3.740165] hub 1-0:1.0: 2 ports detected
  327. [ 3.745687] of_cfs_init
  328. [ 3.746594] meson-gx-mmc d0072000.mmc: Looking up vmmc-supply from device tree
  329. [ 3.747554] of_cfs_init: OK
  330. [ 3.747610] meson-gx-mmc d0072000.mmc: Looking up vqmmc-supply from device tree
  331. [ 3.749380] meson-gx-mmc d0072000.mmc: Got CD GPIO
  332. [ 3.749701] ALSA device list:
  333. [ 3.758305] No soundcards found.
  334. [ 3.783617] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
  335. [ 3.801253] Freeing unused kernel memory: 7744K
  336. [ 3.829271] Checked W+X mappings: passed, no W+X pages found
  337. [ 3.830917] Run /init as init process
  338. [ 3.834442] with arguments:
  339. [ 3.834445] /init
  340. [ 3.834448] noquiet
  341. [ 3.834451] splash
  342. [ 3.834454] with environment:
  343. [ 3.834457] HOME=/
  344. [ 3.834460] TERM=linux
  345. [ 3.834463] BOOT_IMAGE=/boot/vmlinuz-6.1.87-15358-g9f51a48ea718
  346. [ 3.902041] mmc1: new ultra high speed SDR104 SDXC card at address 59b4
  347. [ 3.905355] mmcblk1: mmc1:59b4 GF8S5 478 GiB
  348. [ 3.914461] mmcblk1: p1
  349. [ 3.998955] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  350. [ 4.148521] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
  351. [ 4.154289] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  352. [ 4.161412] usb 1-1: Product: USB2.0 Hub
  353. [ 4.217509] hub 1-1:1.0: USB hub found
  354. [ 4.219611] hub 1-1:1.0: 4 ports detected
  355. [ 4.273514] [drm] Initialized simpledrm 1.0.0 20200625 for 7fe5b000.framebuffer on minor 1
  356. [ 4.280659] simple-framebuffer 7fe5b000.framebuffer: [drm] fb1: simpledrmdrmfb frame buffer device
  357. [ 4.351277] meson-vrtc c81000a8.rtc: registered as rtc0
  358. [ 4.354304] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
  359. [ 4.368048] lima d00c0000.gpu: Looking up mali-supply from device tree
  360. [ 4.368068] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
  361. [ 4.389904] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
  362. [ 4.393223] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
  363. [ 4.399077] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
  364. [ 4.405232] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
  365. [ 4.411313] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
  366. [ 4.436847] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
  367. [ 4.455364] lima d00c0000.gpu: bus rate = 166666667
  368. [ 4.458459] lima d00c0000.gpu: mod rate = 24000000
  369. [ 4.462654] lima d00c0000.gpu: Looking up mali-supply from device tree
  370. [ 4.462677] lima d00c0000.gpu: Looking up mali-supply property in node /soc/apb@d0000000/gpu@c0000 failed
  371. [ 4.462707] lima d00c0000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
  372. [ 4.523699] BTRFS: device label writable devid 1 transid 6855 /dev/mmcblk0p2 scanned by systemd-udevd (192)
  373. [ 4.528654] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 2
  374. [ 4.578966] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd
  375. [ 4.808260] usb 1-1.3: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
  376. [ 4.840405] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  377. [ 4.853224] usb 1-1.3: Product: 802.11 n WLAN
  378. [ 4.864200] usb 1-1.3: SerialNumber: 1.0
  379. [ 5.249135] async_tx: api initialized (async)
  380. [ 5.747697] BTRFS info (device mmcblk0p2): first mount of filesystem 29d512f7-4728-44f2-9070-cc9e4c3592bd
  381. [ 5.751801] BTRFS info (device mmcblk0p2): using crc32c (crc32c-generic) checksum algorithm
  382. [ 5.760047] BTRFS info (device mmcblk0p2): disk space caching is enabled
  383. [ 5.776063] BTRFS info (device mmcblk0p2): enabling ssd optimizations
  384. [ 6.334716] systemd[1]: System time before build time, advancing clock.
  385. [ 6.389633] NET: Registered PF_INET6 protocol family
  386. [ 6.414056] Segment Routing with IPv6
  387. [ 6.414176] RPL Segment Routing with IPv6
  388. [ 6.416254] In-situ OAM (IOAM) with IPv6
  389. [ 6.529094] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  390. [ 6.557552] systemd[1]: Detected architecture arm64.
  391. [ 7.418425] systemd[1]: Queued start job for default target Graphical Interface.
  392. [ 7.447157] systemd[1]: Created slice Slice /system/modprobe.
  393. [ 7.450471] systemd[1]: Created slice Slice /system/serial-getty.
  394. [ 7.457351] systemd[1]: Created slice Slice /system/systemd-fsck.
  395. [ 7.465136] systemd[1]: Created slice Slice /system/systemd-growfs.
  396. [ 7.473286] systemd[1]: Created slice User and Session Slice.
  397. [ 7.480755] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  398. [ 7.491370] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  399. [ 7.504875] systemd[1]: Reached target Slice Units.
  400. [ 7.515033] systemd[1]: Reached target Local Verity Protected Volumes.
  401. [ 7.524470] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  402. [ 7.533996] systemd[1]: Listening on LVM2 poll daemon socket.
  403. [ 7.544751] systemd[1]: Listening on multipathd control socket.
  404. [ 7.554286] systemd[1]: Listening on Syslog Socket.
  405. [ 7.560209] systemd[1]: Listening on fsck to fsckd communication Socket.
  406. [ 7.569382] systemd[1]: Listening on initctl Compatibility Named Pipe.
  407. [ 7.578446] systemd[1]: Listening on Journal Audit Socket.
  408. [ 7.586245] systemd[1]: Listening on Journal Socket (/dev/log).
  409. [ 7.594294] systemd[1]: Listening on Journal Socket.
  410. [ 7.601478] systemd[1]: Listening on Network Service Netlink Socket.
  411. [ 7.609823] systemd[1]: Listening on udev Control Socket.
  412. [ 7.617021] systemd[1]: Listening on udev Kernel Socket.
  413. [ 7.667335] systemd[1]: Mounting Huge Pages File System...
  414. [ 7.679321] systemd[1]: Mounting POSIX Message Queue File System...
  415. [ 7.691602] systemd[1]: Mounting Kernel Debug File System...
  416. [ 7.704827] systemd[1]: Mounting Kernel Trace File System...
  417. [ 7.720031] systemd[1]: Starting Journal Service...
  418. [ 7.733298] systemd[1]: Starting Restore / save the current clock...
  419. [ 7.746564] systemd[1]: Starting Set the console keyboard layout...
  420. [ 7.761167] systemd[1]: Starting Create List of Static Device Nodes...
  421. [ 7.777952] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  422. [ 7.793659] systemd[1]: Condition check resulted in LXD - agent being skipped.
  423. [ 7.800202] systemd[1]: Starting Load Kernel Module configfs...
  424. [ 7.812508] systemd[1]: Starting Load Kernel Module drm...
  425. [ 7.822982] systemd[1]: Starting Load Kernel Module efi_pstore...
  426. [ 7.834957] systemd[1]: Starting Load Kernel Module fuse...
  427. [ 7.843591] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  428. [ 7.851610] systemd[1]: Starting Load Kernel Modules...
  429. [ 7.874496] systemd[1]: Starting Remount Root and Kernel File Systems...
  430. [ 7.890222] systemd[1]: Starting Coldplug All udev Devices...
  431. [ 7.894243] fuse: init (API version 7.37)
  432. [ 7.913502] systemd[1]: Mounted Huge Pages File System.
  433. [ 7.913575] Asymmetric key parser 'pkcs8' registered
  434. [ 7.925985] systemd[1]: Mounted POSIX Message Queue File System.
  435. [ 7.934858] systemd[1]: Mounted Kernel Debug File System.
  436. [ 7.942861] systemd[1]: Mounted Kernel Trace File System.
  437. [ 7.952937] systemd[1]: Finished Restore / save the current clock.
  438. [ 7.958026] BTRFS info (device mmcblk0p2: state M): use zstd compression, level 3
  439. [ 7.973125] systemd[1]: Finished Create List of Static Device Nodes.
  440. [ 7.988705] systemd[1]: [email protected]: Deactivated successfully.
  441. [ 7.993161] systemd[1]: Finished Load Kernel Module configfs.
  442. [ 8.006065] systemd[1]: Started Journal Service.
  443. [ 8.099708] alua: device handler registered
  444. [ 8.101471] emc: device handler registered
  445. [ 8.103765] rdac: device handler registered
  446. [ 8.118405] device-mapper: uevent: version 1.0.3
  447. [ 8.128922] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
  448. [ 8.140860] systemd-journald[437]: Received client request to flush runtime journal.
  449. [ 8.183043] systemd-journald[437]: File /var/log/journal/7071b4ed847549240ec3be696512d966/system.journal corrupted or uncleanly shut down, renaming and replacing.
  450. [ 9.355735] Error: Driver 'simple-framebuffer' is already registered, aborting...
  451. [ 9.445622] t9015-codec c8832000.audio-controller: Looking up AVDD-supply from device tree
  452. [ 9.467950] mc: Linux media interface: v0.10
  453. [ 9.470986] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
  454. [ 9.471757] simple-amplifier analog-amplifier: Looking up VCC-supply from device tree
  455. [ 9.472675] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
  456. [ 9.595802] videodev: Linux video capture interface: v2.00
  457. [ 9.664759] Registered IR keymap rc-empty
  458. [ 9.664914] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
  459. [ 9.665127] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
  460. [ 9.666064] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input0
  461. [ 9.666650] meson-ir c8100580.ir: receiver initialized
  462. [ 9.790403] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
  463. [ 9.831987] usbcore: registered new device driver onboard-usb-hub
  464. [ 9.858651] usb 1-1.3: USB disconnect, device number 3
  465. [ 10.070120] hub 1-1:1.0: USB hub found
  466. [ 10.070496] hub 1-1:1.0: 4 ports detected
  467. [ 10.112248] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  468. [ 10.132428] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  469. [ 10.133154] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  470. [ 10.257273] usbcore: registered new interface driver mt7601u
  471. [ 10.267316] hub 1-1:1.0: USB hub found
  472. [ 10.267698] hub 1-1:1.0: 4 ports detected
  473. [ 10.514945] usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
  474. [ 10.751698] usb 1-1.3: New USB device found, idVendor=148f, idProduct=7601, bcdDevice= 0.00
  475. [ 10.751875] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  476. [ 10.751969] usb 1-1.3: Product: 802.11 n WLAN
  477. [ 10.752044] usb 1-1.3: SerialNumber: 1.0
  478. [ 10.842014] usb 1-1.3: reset high-speed USB device number 4 using xhci-hcd
  479. [ 10.950128] mt7601u 1-1.3:1.0: ASIC revision: 76010001 MAC revision: 76010500
  480. [ 10.959515] mt7601u 1-1.3:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
  481. [ 11.431944] mt7601u 1-1.3:1.0: EEPROM ver:0c fae:00
  482. [ 11.755214] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  483. [ 11.866424] mt7601u 1-1.3:1.0 wlx3c3300006ced: renamed from wlan0
  484. [ 12.063845] loop0: detected capacity change from 0 to 121336
  485. [ 12.075520] loop1: detected capacity change from 0 to 122368
  486. [ 12.083686] loop2: detected capacity change from 0 to 158464
  487. [ 12.093032] loop3: detected capacity change from 0 to 158464
  488. [ 12.099705] loop4: detected capacity change from 0 to 95056
  489. [ 12.108122] loop5: detected capacity change from 0 to 68920
  490. [ 13.654719] wlx3c3300006ced: authenticate with f8:9b:6e:1d:55:74
  491. [ 13.682739] wlx3c3300006ced: send auth to f8:9b:6e:1d:55:74 (try 1/3)
  492. [ 13.684625] wlx3c3300006ced: authenticated
  493. [ 13.686932] wlx3c3300006ced: associate with f8:9b:6e:1d:55:74 (try 1/3)
  494. [ 13.691263] wlx3c3300006ced: RX AssocResp from f8:9b:6e:1d:55:74 (capab=0x411 status=0 aid=8)
  495. [ 13.740309] wlx3c3300006ced: associated
  496. [ 13.797382] wlx3c3300006ced: Limiting TX power to 30 (30 - 0) dBm as advertised by f8:9b:6e:1d:55:74
  497. [ 13.797579] IPv6: ADDRCONF(NETDEV_CHANGE): wlx3c3300006ced: link becomes ready
  498. [ 17.226855] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
  499. [ 17.353491] meson8b-dwmac c9410000.ethernet eth0: PHY [mdio_mux-0.1:08] driver [Meson GXL Internal PHY] (irq=27)
  500. [ 17.365228] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
  501. [ 17.365256] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
  502. [ 17.365753] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
  503. [ 17.649392] openvswitch: Open vSwitch switching datapath
  504. [ 18.916918] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  505. [ 18.917233] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  506. [ 20.149601] Adding 1048572k swap on /swapfile. Priority:-2 extents:2 across:1074924k FS
  507. [ 20.618016] Bluetooth: Core ver 2.22
  508. [ 20.618175] NET: Registered PF_BLUETOOTH protocol family
  509. [ 20.618186] Bluetooth: HCI device and connection manager initialized
  510. [ 20.618203] Bluetooth: HCI socket layer initialized
  511. [ 20.618210] Bluetooth: L2CAP socket layer initialized
  512. [ 20.618237] Bluetooth: SCO socket layer initialized
  513. [ 23.423255] loop6: detected capacity change from 0 to 8
  514. cakedayy@potato:~$ lsblk
  515. NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
  516. loop0 7:0 0 59.2M 1 loop /snap/core20/1977
  517. loop1 7:1 0 59.8M 1 loop /snap/core20/2267
  518. loop2 7:2 0 77.4M 1 loop /snap/lxd/27950
  519. loop3 7:3 0 77.4M 1 loop /snap/lxd/28384
  520. loop4 7:4 0 46.4M 1 loop /snap/snapd/19459
  521. loop5 7:5 0 33.7M 1 loop /snap/snapd/21467
  522. mmcblk0 179:0 0 14.6G 0 disk
  523. ├─mmcblk0p1 179:1 0 256M 0 part /boot/efi
  524. └─mmcblk0p2 179:2 0 14.3G 0 part /
  525. mmcblk0boot0 179:32 0 4M 1 disk
  526. mmcblk0boot1 179:64 0 4M 1 disk
  527. mmcblk1 179:96 0 477.5G 0 disk
  528. └─mmcblk1p1 179:97 0 465.7G 0 part
  529. └─md0 9:0 0 0B 0 md
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!