Advertisement
Guest User

Untitled

a guest
May 21st, 2019
76
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.30 KB | None | 0 0
  1. [2019-05-21 20:47:00] [Output] : ★ George Remington sits down on his knees with his impact gun in the right hand.
  2. [2019-05-21 20:47:11] [Output] : ★ Steven Hopkins places the drill kit on the table.
  3. [2019-05-21 20:47:28] [Output] : ★ Steven Hopkins takes out a 5mm metal bit and puts it on, tightening the bit.
  4. [2019-05-21 20:47:30] [Output] : ★ George Remington starts unbolting the 5 lugnuts and placing them on the ramp.
  5. [2019-05-21 20:47:54] [Output] : ★ George Remington would then slide off the front left wheel from the hub and place it on the ground.
  6. [2019-05-21 20:48:19] [Output] : [English] George Remington says: Cuz,come around here.
  7. [2019-05-21 20:48:27] [Output] : [English] Claude Remington says: Yeah?
  8. [2019-05-21 20:48:40] [Output] : [English] George Remington says: Come get the torque wrench from the trunk of the X5
  9. [2019-05-21 20:48:44] [Output] : [English] George Remington says: I need that
  10. [2019-05-21 20:49:29] [Output] : ★ Claude Remington would go to the trunk of the X5.
  11. [2019-05-21 20:50:13] [Output] : ★ Claude Remington would put his hand on the boot handle and hould push it up following to open the boot.
  12. [2019-05-21 20:51:01] [Output] : ★ Claude Remington would look in the trunk and would search for the torque wrench
  13. [2019-05-21 20:51:26] [Output] : ★ Claude Remington would eye the torque wrench following to put his hand on it and get it out from the boot
  14. [2019-05-21 20:51:54] [Output] : ★ Claude Remington would approch George and would give him the wrench
  15. [2019-05-21 20:52:07] [Output] : ★ George Remington picks up the torque wrench from claude and head back to the car
  16. [2019-05-21 20:52:39] [Output] : ★ George Remington puts the torque wrench on the bottom of the outer tie bolt and starts detaching it.
  17. [2019-05-21 20:53:09] [Output] : ★ George Remington would then put the bolt on the ramp and grab the tie rod out from the hole.
  18. [2019-05-21 20:53:13] [Output] : [English] George Remington says: Ok,road clear.
  19. [2019-05-21 20:53:19] [Output] : [English] George Remington says: Come here and drill another hole
  20. [2019-05-21 20:53:27] [Output] : * Steven Hopkins slips out a marker from his pocket. *
  21. [2019-05-21 20:53:44] [Output] : [English] George Remington says: Just by the old one,we should get around 10 to 15 degrees in steering.
  22. [2019-05-21 20:53:47] [Output] : Steven Hopkins: (( whats it called again? Wheel Knuckles? ))
  23. [2019-05-21 20:53:53] [Output] : George Remington: (( yea ))
  24. [2019-05-21 20:54:10] [Output] : ★ Steven Hopkins makes a small marking, just about a few millimetres off the old one.
  25. [2019-05-21 20:54:17] [Output] : * Steven Hopkins slips the marker back into his pocket. *
  26. [2019-05-21 20:54:22] [Output] : PM From (3) Claude Remington (BerKo): ai mai reusit ceva cu exploreru?
  27. [2019-05-21 20:54:28] [Output] : PM Sent to (3) Claude Remington (BerKo): e sub harta
  28. [2019-05-21 20:54:33] [Output] : PM From (3) Claude Remington (BerKo): am inteles,cum asa?
  29. [2019-05-21 20:54:34] [Output] : PM Sent to (3) Claude Remington (BerKo): da taci ca imi dai logurile peste cap
  30. [2019-05-21 20:54:37] [Output] : ★ Steven Hopkins picks up the portable drill machine already equipped with the bit.
  31. [2019-05-21 20:55:13] [Output] : ★ Steven Hopkins turns the drill mode to mallet and pushes the trigger once while holding it on the mark.
  32. [2019-05-21 20:55:19] [Output] : ★ It'd mak a small dent on the mark. ((Steven Hopkins))
  33. [2019-05-21 20:55:26] [Output] : * Steven Hopkins turns the drill mode to normal drill. *
  34. [2019-05-21 20:55:44] [Output] : ★ Steven Hopkins pushes the drill bit onto the dent and starts pulling the trigger hard.
  35. [2019-05-21 20:55:56] [Output] : ★ It'd take a few seconds to go through the metal. ((Steven Hopkins))
  36. [2019-05-21 20:56:13] [Output] : ★ Steven Hopkins releases the trigger and pulls out the drill machine, then blows off the metal dust.
  37. [2019-05-21 20:56:15] [Output] : [English] Steven Hopkins says: Clear.
  38. [2019-05-21 20:56:26] [Output] : Steven Hopkins: (( I hope that RP was decent :3 ))
  39. [2019-05-21 20:56:36] [Output] : [English] George Remington says: Ok,so I can get back the rod in place.
  40. [2019-05-21 20:56:40] [Output] : [English] George Remington says: Then we rotate the car.
  41. [2019-05-21 20:56:47] [Output] : [English] Steven Hopkins says: Alrightio.
  42. [2019-05-21 20:56:51] [Output] : * Claude Remington puts a Vehicle Key (2000 BMW E46 328Ci) inside the safe. *
  43. [2019-05-21 20:56:51] [Output] : ★ George Remington would head back to the car's suspension
  44. [2019-05-21 20:57:24] [Output] : ★ George Remington picks up the left outer tie rod with his right hand and places it into the new drilled hole
  45. [2019-05-21 20:57:36] [Output] : [English] Steven Hopkins says: Fittin' in good?
  46. [2019-05-21 20:57:41] [Output] : [English] George Remington says: Yea,fits perfect.
  47. [2019-05-21 20:57:48] [Output] : * Steven Hopkins nods, smiling. *
  48. [2019-05-21 20:57:52] [Output] : ★ The tie would be set in the hole just right. ((George Remington))
  49. [2019-05-21 20:58:03] [Output] : ★ Claude Remington would put his hand on the handle of the boot and would close it.
  50. [2019-05-21 20:58:13] [Output] : ★ George Remington would then pick up the bottom bolt of the tie and screw it in by hand
  51. [2019-05-21 20:58:30] [Output] : ★ George Remington would then get in the torque wrench and tighten down the bolt to max.
  52. [2019-05-21 20:58:41] [Output] : [English] George Remington says: No problems till now,it s perfect
  53. [2019-05-21 20:58:47] [Output] : [English] Steven Hopkins says: Mhm.
  54. [2019-05-21 20:58:54] [Output] : ★ George Remington picks then the wheel up from the ground and slides it in the wheel hub.
  55. [2019-05-21 20:59:11] [Output] : ★ George Remington would then pick up the lugnuts and place them in the holes one by one.
  56. [2019-05-21 20:59:21] [Output] : [English] Claude Remington says: Cuz,how long do you think you're gonna end up with the Lamborghini?
  57. [2019-05-21 20:59:31] [Output] : [English] George Remington says: Two weeks at best.
  58. [2019-05-21 20:59:49] [Output] : ★ George Remington then tightens down the lugnuts with his impact gun.
  59. [2019-05-21 20:59:52] [Output] : ★ Claude Remington would look surpised.
  60. [2019-05-21 21:00:04] [Output] : [English] George Remington says: I will send you to Steve if you want the suspension work done.
  61. [2019-05-21 21:00:04] [Output] : [English] Claude Remington says: Fuck me.. what do you need to do to it?
  62. [2019-05-21 21:00:12] [Output] : [English] George Remington says: Twinees
  63. [2019-05-21 21:00:17] [Output] : * George Remington presses the button on the ramp controls lowering the car lift. *
  64. [2019-05-21 21:00:58] [Output] : Vehicle spawn position set.
  65. [2019-05-21 21:01:02] [Output] : * George Remington presses the button on the ramp controls raising the car lift. *
  66. [2019-05-21 21:01:05] [Output] : Payslip
  67. [2019-05-21 21:01:05] [Output] :
  68. [2019-05-21 21:01:05] [Output] : Bank Interest: $1,000 (≈0.31%)
  69. [2019-05-21 21:01:05] [Output] : Vehicle Tax: $140
  70. [2019-05-21 21:01:05] [Output] : Property Expenses: $65
  71. [2019-05-21 21:01:05] [Output] : Gross Income: $795
  72. [2019-05-21 21:01:05] [Output] : Remark(s): Transferred to your bank account.
  73. [2019-05-21 21:01:09] [Output] : PM From (3) Claude Remington (BerKo): ma duc ca cica mi se sterge casa
  74. [2019-05-21 21:01:23] [Output] : [English] George Remington says: Ok,let me take it out and we can proceed
  75. [2019-05-21 21:01:27] [Output] : PM Sent to (3) Claude Remington (BerKo): du-te si intra in ea
  76. [2019-05-21 21:01:30] [Output] : [English] Claude Remington says: Be right back cuz.
  77. [2019-05-21 21:01:31] [Output] : * Claude Remington presses on the key to unlock the vehicle. ((2000 BMW E46 328Ci)) *
  78. [2019-05-21 21:01:38] [Output] : * Claude Remington locks the vehicle doors. *
  79. [2019-05-21 21:01:38] [Output] : * Claude Remington buckles in their seatbelt. *
  80. [2019-05-21 21:01:50] [Output] : ★ George Remington puts the impact gun on top of the lug nuts and starts taking them out one by one
  81. [2019-05-21 21:02:05] [Output] : ★ George Remington would then grab out the wheel keeping the lugs in the holes of the rim
  82. [2019-05-21 21:02:07] [Output] : [English] Steven Hopkins says: Let's do this quicker - I've to attend a DCS training by Leon.
  83. [2019-05-21 21:02:22] [Output] : ★ George Remington puts the wheel on the floor and then mooves to the tie
  84. [2019-05-21 21:02:24] [Output] : [English] George Remington says: In a minute.
  85. [2019-05-21 21:02:31] [Output] : ADVERT: Willowfield Ammunation & Express Pharmacy near Bike shop for sale! Great places, goes cheap! Call or SMS | #505598
  86. [2019-05-21 21:02:44] [Output] : ★ George Remington sits down on his knees and starts unscrewing the bolt of the outer tie rod.
  87. [2019-05-21 21:03:01] [Output] : ★ George Remington would then place the dettached bolt on the ramp and lift up the tie mooving it.
  88. [2019-05-21 21:03:07] [Output] : [English] George Remington says: Come and start drilling
  89. [2019-05-21 21:03:22] [Output] : * Steven Hopkins slides out a marker, makes a mark just beside the old hole. *
  90. [2019-05-21 21:03:26] [Output] : * Steven Hopkins pockets the marker. *
  91. [2019-05-21 21:03:46] [Output] : ★ Steven Hopkins places the drill bit on the mark and turns the mode onto mallet.
  92. [2019-05-21 21:03:50] [Output] : ★ It'd make a small dent. ((Steven Hopkins))
  93. [2019-05-21 21:03:54] [Output] : ★ Steven Hopkins turns the mode into Drill.
  94. [2019-05-21 21:04:15] [Output] : Captură de ecran efectuată: 'C:\Program Files (x86)\MTA San Andreas 1.5\screenshots\mta-screen_2019-05-21_21-04-15.png'
  95. [2019-05-21 21:04:21] [Output] : ★ Steven Hopkins starts pulling the trigger hard enough so the drill bit punches through the metal.
  96. [2019-05-21 21:04:26] [Output] : * Steven Hopkins blows the metal dust off. *
  97. [2019-05-21 21:04:29] [Output] : [English] Steven Hopkins says: Done.
  98. [2019-05-21 21:04:34] [Output] : [English] Steven Hopkins says: That's it?
  99. [2019-05-21 21:04:34] [Output] : [English] George Remington says: Alright,you can go.
  100. [2019-05-21 21:04:41] [Output] : [English] Steven Hopkins says: Okie.
  101. [2019-05-21 21:04:45] [Output] : * Steven Hopkins's cellphone starts to ring. *
  102. [2019-05-21 21:04:46] [Output] : [English] George Remington says: I will transfer you some money after I assemble it back.
  103. [2019-05-21 21:04:50] [Output] : [English] Steven Hopkins says: Mhm.
  104. [2019-05-21 21:04:51] [Output] : * Steven Hopkins takes out his Cellphone. *
  105. [2019-05-21 21:05:02] [Output] : ★ George Remington goes back down and spots the new hole
  106. [2019-05-21 21:05:02] [Output] : ★ Steven Hopkins places the drill bit in the box and closes it.
  107. [2019-05-21 21:05:04] [Output] : [English] Steven Hopkins [Phone]: Hi.
  108. [2019-05-21 21:05:12] [Output] : ★ Steven Hopkins picks the kit up and walks out.
  109. [2019-05-21 21:05:25] [Output] : ★ George Remington picks up the outer tie rod and puts in in the new drilled hole
  110. [2019-05-21 21:05:46] [Output] : ADVERT: [SELLING] 2014 Ford F-150 SVT Raptor SuperCrew ~ 6 inch lift kit installed ~ Call me with an offer | #2002002
  111. [2019-05-21 21:05:47] [Output] : ★ George Remington would then pick up the bottom bolt of it and tighten it down to max with the torque wrench.
  112. [2019-05-21 21:06:03] [Output] : ★ George Remington picks up the wheel after and slides it back into it s hub
  113. [2019-05-21 21:06:18] [Output] : ★ George Remington then tightens down to max the 5 lugnuts in a star pattern using the impact gun
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement