API tools faq
paste
Advertisement
robathome

Klippy_11-May-2019

robathome
May 11th, 2019
215
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 410.15 KB | None | 0 0
raw download clone embed print report
  1. Starting Klippy...
  2. Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer.cfg', '-l', '/tmp/klippy.log']
  3. Git version: 'v0.7.0-457-g777013d'
  4. CPU: 4 core ARMv7 Processor rev 4 (v7l)
  5. Python: '2.7.13 (default, Sep 26 2018, 18:42:22) \n[GCC 6.3.0 20170516]'
  6. Start printer at Sat May 11 23:12:57 2019 (1557612777.5 8.1)
  7. ===== Config file =====
  8. [stepper_x]
  9. step_pin = ar54
  10. dir_pin = ar55
  11. enable_pin = !ar38
  12. step_distance = .0125
  13. endstop_pin = ^!ar2
  14. position_endstop = 0
  15. position_max = 220
  16. homing_speed = 50
  17.  
  18. [stepper_y]
  19. step_pin = ar60
  20. dir_pin = !ar61
  21. enable_pin = !ar56
  22. step_distance = .0125
  23. endstop_pin = ^!ar15
  24. position_endstop = 200
  25. position_max = 200
  26. homing_speed = 50
  27.  
  28. [stepper_z]
  29. step_pin = ar46
  30. dir_pin = ar48
  31. enable_pin = !ar62
  32. step_distance = .0025
  33. endstop_pin = ^!ar19
  34. position_endstop = 0.5
  35. position_max = 220
  36.  
  37. [extruder]
  38. step_pin = ar26
  39. dir_pin = ar28
  40. enable_pin = !ar24
  41. step_distance = .002
  42. nozzle_diameter = 0.400
  43. filament_diameter = 1.750
  44. heater_pin = ar10
  45. sensor_type = EPCOS 100K B57560G104F
  46. sensor_pin = analog14
  47. control = pid
  48. pid_kp = 22.2
  49. pid_ki = 1.08
  50. pid_kd = 114
  51. min_temp = 0
  52. max_temp = 250
  53.  
  54. [verify_heater extruder]
  55. heating_gain = 2
  56. check_gain_time = 25
  57. hysteresis = 7.5
  58. max_error = 240
  59.  
  60. [heater_bed]
  61. heater_pin = ar8
  62. sensor_type = EPCOS 100K B57560G104F
  63. sensor_pin = analog13
  64. control = pid
  65. pid_kp = 54.027
  66. pid_ki = 0.770
  67. pid_kd = 948.182
  68. min_temp = 0
  69. max_temp = 130
  70.  
  71. [fan]
  72. pin = ar9
  73. max_power = 1.0
  74. cycle_time = 0.05
  75. kick_start_time = 0.1
  76.  
  77. [mcu]
  78. serial = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A506DEP7-if00-port0
  79. pin_map = arduino
  80. baud = 250000
  81.  
  82. [printer]
  83. kinematics = cartesian
  84. max_velocity = 300
  85. max_accel = 3000
  86. max_z_velocity = 20
  87. max_z_accel = 1000
  88. max_accel_to_decel = 2500
  89. square_corner_velocity = 5
  90.  
  91. [homing_override]
  92. set_position_z = 5
  93. gcode = G1 Z10 F500
  94. G28
  95. axes = z
  96.  
  97. [virtual_sdcard]
  98. path = ~/.octoprint/uploads/
  99.  
  100. [force_move]
  101. enable_force_move = True
  102. =======================
  103. Extruder max_extrude_ratio=0.266081
  104. Starting serial connect
  105. Loaded MCU 'mcu' 77 commands (v0.7.0-457-g777013d-20190511_224917-octopi / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125)
  106. MCU 'mcu' config: RECEIVE_WINDOW=192 BUS_PINS_spi=PB3,PB2,PB1 SOFT_PWM_MAX=256 SERIAL_BAUD=250000 STEP_DELAY=-1 ADC_MAX=1023 PWM_MAX=255 RESERVE_PINS_serial=PE0,PE1 BUS_PINS_twi=PD0,PD1 MCU=atmega2560 STATS_SUMSQ_BASE=256 CLOCK_FREQ=16000000
  107. Sending MCU 'mcu' printer configuration...
  108. Configured MCU 'CLOCK_FREQ' (634 moves)
  109. Starting heater checks for extruder
  110. Starting heater checks for heater_bed
  111. Stats 10.3: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=870 bytes_read=3399 bytes_retransmit=19 bytes_invalid=0 send_seq=101 receive_seq=101 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870373 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=1.789 buffer_time=0.249 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
  112. Stats 11.3: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=876 bytes_read=3466 bytes_retransmit=19 bytes_invalid=0 send_seq=102 receive_seq=102 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870647 heater_bed: target=0 temp=33.3 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.1 pwm=0.000
  113. Stats 12.3: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=882 bytes_read=3559 bytes_retransmit=19 bytes_invalid=0 send_seq=103 receive_seq=103 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870744 heater_bed: target=0 temp=33.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.8 pwm=0.000
  114. Stats 13.3: gcodein=0 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=888 bytes_read=3665 bytes_retransmit=19 bytes_invalid=0 send_seq=104 receive_seq=104 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870802 heater_bed: target=0 temp=33.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.4 pwm=0.000
  115. Stats 14.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000146 mcu_task_stddev=0.000392 bytes_write=894 bytes_read=3786 bytes_retransmit=19 bytes_invalid=0 send_seq=105 receive_seq=105 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870846 heater_bed: target=0 temp=33.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.9 pwm=0.000
  116. Stats 15.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000146 mcu_task_stddev=0.000392 bytes_write=900 bytes_read=3879 bytes_retransmit=19 bytes_invalid=0 send_seq=106 receive_seq=106 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870858 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.5 pwm=0.000
  117. Stats 16.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000146 mcu_task_stddev=0.000392 bytes_write=906 bytes_read=3985 bytes_retransmit=19 bytes_invalid=0 send_seq=107 receive_seq=107 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870867 heater_bed: target=0 temp=32.9 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.2 pwm=0.000
  118. Stats 17.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000146 mcu_task_stddev=0.000392 bytes_write=912 bytes_read=4091 bytes_retransmit=19 bytes_invalid=0 send_seq=108 receive_seq=108 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870874 heater_bed: target=0 temp=33.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.7 pwm=0.000
  119. Stats 18.3: gcodein=0 mcu: mcu_awake=0.025 mcu_task_avg=0.000146 mcu_task_stddev=0.000392 bytes_write=918 bytes_read=4184 bytes_retransmit=19 bytes_invalid=0 send_seq=109 receive_seq=109 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870877 heater_bed: target=0 temp=32.9 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.4 pwm=0.000
  120. Stats 19.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=924 bytes_read=4303 bytes_retransmit=19 bytes_invalid=0 send_seq=110 receive_seq=110 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870894 heater_bed: target=0 temp=32.9 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.0 pwm=0.000
  121. Stats 20.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=930 bytes_read=4409 bytes_retransmit=19 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870897 heater_bed: target=0 temp=33.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.6 pwm=0.000
  122. Stats 21.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=936 bytes_read=4503 bytes_retransmit=19 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870903 heater_bed: target=0 temp=32.8 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.3 pwm=0.000
  123. Stats 22.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=942 bytes_read=4603 bytes_retransmit=19 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870910 heater_bed: target=0 temp=33.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.9 pwm=0.000
  124. Stats 23.3: gcodein=0 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=948 bytes_read=4717 bytes_retransmit=19 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870914 heater_bed: target=0 temp=32.8 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.6 pwm=0.000
  125. Stats 24.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000061 bytes_write=954 bytes_read=4844 bytes_retransmit=19 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870914 heater_bed: target=0 temp=33.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.2 pwm=0.000
  126. Stats 25.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000061 bytes_write=960 bytes_read=4944 bytes_retransmit=19 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870916 heater_bed: target=0 temp=32.9 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.8 pwm=0.000
  127. Stats 26.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000061 bytes_write=966 bytes_read=5058 bytes_retransmit=19 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870916 heater_bed: target=0 temp=32.8 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.5 pwm=0.000
  128. Stats 27.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000061 bytes_write=972 bytes_read=5172 bytes_retransmit=19 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870917 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.0 pwm=0.000
  129. Stats 28.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000061 bytes_write=978 bytes_read=5272 bytes_retransmit=19 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870917 heater_bed: target=0 temp=32.8 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.7 pwm=0.000
  130. Stats 29.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=984 bytes_read=5399 bytes_retransmit=19 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870917 heater_bed: target=0 temp=32.6 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.4 pwm=0.000
  131. Stats 30.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=990 bytes_read=5513 bytes_retransmit=19 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870918 heater_bed: target=0 temp=33.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.9 pwm=0.000
  132. Stats 31.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=996 bytes_read=5613 bytes_retransmit=19 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870918 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.6 pwm=0.000
  133. Stats 32.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=1002 bytes_read=5727 bytes_retransmit=19 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870920 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.3 pwm=0.000
  134. Stats 33.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=1008 bytes_read=5841 bytes_retransmit=19 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870921 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.8 pwm=0.000
  135. Stats 34.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1014 bytes_read=5954 bytes_retransmit=19 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870922 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.5 pwm=0.000
  136. Stats 35.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1020 bytes_read=6068 bytes_retransmit=19 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870923 heater_bed: target=0 temp=32.5 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.2 pwm=0.000
  137. Stats 36.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1026 bytes_read=6168 bytes_retransmit=19 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870925 heater_bed: target=0 temp=32.6 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.9 pwm=0.000
  138. Stats 37.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1032 bytes_read=6282 bytes_retransmit=19 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870926 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.5 pwm=0.000
  139. Stats 38.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1038 bytes_read=6382 bytes_retransmit=19 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870926 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.2 pwm=0.000
  140. Stats 39.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1044 bytes_read=6509 bytes_retransmit=19 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870927 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.9 pwm=0.000
  141. Stats 40.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1050 bytes_read=6623 bytes_retransmit=19 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870927 heater_bed: target=0 temp=32.5 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.5 pwm=0.000
  142. Stats 41.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1056 bytes_read=6723 bytes_retransmit=19 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870927 heater_bed: target=0 temp=32.5 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.1 pwm=0.000
  143. Stats 42.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1062 bytes_read=6837 bytes_retransmit=19 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870928 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.8 pwm=0.000
  144. Stats 43.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1068 bytes_read=6951 bytes_retransmit=19 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870933 heater_bed: target=0 temp=32.5 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.4 pwm=0.000
  145. Stats 44.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1074 bytes_read=7051 bytes_retransmit=19 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870933 heater_bed: target=0 temp=32.6 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.1 pwm=0.000
  146. Stats 45.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1080 bytes_read=7178 bytes_retransmit=19 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870933 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.9 pwm=0.000
  147. Stats 46.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1086 bytes_read=7292 bytes_retransmit=19 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870935 heater_bed: target=0 temp=32.7 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.5 pwm=0.000
  148. Stats 47.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1092 bytes_read=7392 bytes_retransmit=19 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870936 heater_bed: target=0 temp=32.5 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.2 pwm=0.000
  149. Stats 48.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1098 bytes_read=7506 bytes_retransmit=19 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870937 heater_bed: target=0 temp=32.3 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.9 pwm=0.000
  150. Stats 49.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1104 bytes_read=7620 bytes_retransmit=19 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870941 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.4 pwm=0.000
  151. Stats 50.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1110 bytes_read=7733 bytes_retransmit=19 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870942 heater_bed: target=0 temp=32.5 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000
  152. Stats 51.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1116 bytes_read=7833 bytes_retransmit=19 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870944 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.0 pwm=0.000
  153. Stats 52.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1122 bytes_read=7961 bytes_retransmit=19 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870945 heater_bed: target=0 temp=32.6 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.6 pwm=0.000
  154. Stats 53.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1128 bytes_read=8061 bytes_retransmit=19 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870946 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.2 pwm=0.000
  155. Stats 54.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1134 bytes_read=8161 bytes_retransmit=19 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870946 heater_bed: target=0 temp=32.3 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000
  156. Stats 55.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=1140 bytes_read=8288 bytes_retransmit=19 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870946 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
  157. Stats 56.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=1146 bytes_read=8402 bytes_retransmit=19 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870945 heater_bed: target=0 temp=32.3 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.3 pwm=0.000
  158. Stats 57.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=1152 bytes_read=8502 bytes_retransmit=19 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870946 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.0 pwm=0.000
  159. Stats 58.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=1158 bytes_read=8616 bytes_retransmit=19 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870947 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
  160. Stats 59.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=1164 bytes_read=8730 bytes_retransmit=19 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870948 heater_bed: target=0 temp=32.4 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.4 pwm=0.000
  161. Stats 60.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1170 bytes_read=8843 bytes_retransmit=19 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870949 heater_bed: target=0 temp=32.3 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.2 pwm=0.000
  162. Stats 61.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1176 bytes_read=8957 bytes_retransmit=19 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870949 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.8 pwm=0.000
  163. Stats 62.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1182 bytes_read=9071 bytes_retransmit=19 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870950 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.5 pwm=0.000
  164. Stats 63.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1188 bytes_read=9171 bytes_retransmit=19 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870951 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.2 pwm=0.000
  165. Stats 64.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1194 bytes_read=9285 bytes_retransmit=19 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870952 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.9 pwm=0.000
  166. Stats 65.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1206 bytes_read=9412 bytes_retransmit=19 bytes_invalid=0 send_seq=157 receive_seq=156 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870952 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.5 pwm=0.000
  167. Stats 66.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1212 bytes_read=9528 bytes_retransmit=19 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870954 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.3 pwm=0.000
  168. Stats 67.3: gcodein=0 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1218 bytes_read=9628 bytes_retransmit=19 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870954 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.1 pwm=0.000
  169. Stats 68.3: gcodein=49 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1224 bytes_read=9742 bytes_retransmit=19 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870955 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.8 pwm=0.000
  170. Stats 69.3: gcodein=49 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000061 bytes_write=1230 bytes_read=9856 bytes_retransmit=19 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870955 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.4 pwm=0.000
  171. Stats 70.3: gcodein=49 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000062 bytes_write=1236 bytes_read=9969 bytes_retransmit=19 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870955 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.2 pwm=0.000
  172. Stats 71.3: gcodein=49 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000062 bytes_write=1242 bytes_read=10083 bytes_retransmit=19 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870956 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.0 pwm=0.000
  173. Stats 72.3: gcodein=49 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000062 bytes_write=1248 bytes_read=10197 bytes_retransmit=19 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870957 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
  174. Stats 73.3: gcodein=54 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000062 bytes_write=1254 bytes_read=10297 bytes_retransmit=19 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870957 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.4 pwm=0.000
  175. Stats 74.3: gcodein=54 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000062 bytes_write=1260 bytes_read=10411 bytes_retransmit=19 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870958 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000
  176. Stats 75.3: gcodein=54 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1266 bytes_read=10538 bytes_retransmit=19 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870959 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.8 pwm=0.000
  177. Stats 76.3: gcodein=54 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1272 bytes_read=10638 bytes_retransmit=19 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870959 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
  178. Stats 77.3: gcodein=54 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1278 bytes_read=10752 bytes_retransmit=19 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870960 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
  179. Stats 78.3: gcodein=59 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1284 bytes_read=10866 bytes_retransmit=19 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870960 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.1 pwm=0.000
  180. Stats 79.3: gcodein=59 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1290 bytes_read=10966 bytes_retransmit=19 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870961 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.8 pwm=0.000
  181. Stats 80.3: gcodein=59 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1296 bytes_read=11079 bytes_retransmit=19 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870962 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.6 pwm=0.000
  182. Stats 81.3: gcodein=59 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1302 bytes_read=11193 bytes_retransmit=19 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870962 heater_bed: target=0 temp=32.2 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000
  183. Stats 82.3: gcodein=59 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1308 bytes_read=11307 bytes_retransmit=19 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870963 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.1 pwm=0.000
  184. Stats 83.3: gcodein=64 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1314 bytes_read=11407 bytes_retransmit=19 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870963 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
  185. Stats 84.3: gcodein=64 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1320 bytes_read=11521 bytes_retransmit=19 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870964 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.6 pwm=0.000
  186. Stats 85.3: gcodein=64 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=1326 bytes_read=11648 bytes_retransmit=19 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870964 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000
  187. Stats 86.3: gcodein=64 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=1332 bytes_read=11748 bytes_retransmit=19 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870965 heater_bed: target=0 temp=32.1 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000
  188. Stats 87.3: gcodein=64 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=1338 bytes_read=11862 bytes_retransmit=19 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870966 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.9 pwm=0.000
  189. Stats 88.3: gcodein=69 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=1344 bytes_read=11976 bytes_retransmit=19 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870966 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.6 pwm=0.000
  190. Stats 89.3: gcodein=69 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=1350 bytes_read=12076 bytes_retransmit=19 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870967 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
  191. Stats 90.3: gcodein=69 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1356 bytes_read=12203 bytes_retransmit=19 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870967 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=1.789 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.1 pwm=0.000
  192. Stats 91.3: gcodein=74 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1383 bytes_read=12359 bytes_retransmit=19 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870968 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.8 pwm=0.000
  193. Stats 92.3: gcodein=74 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1389 bytes_read=12459 bytes_retransmit=19 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870968 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.6 pwm=0.000
  194. Stats 93.3: gcodein=79 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1395 bytes_read=12559 bytes_retransmit=19 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870969 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.4 pwm=0.000
  195. Stats 94.3: gcodein=79 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1401 bytes_read=12687 bytes_retransmit=19 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870969 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000
  196. Stats 95.3: gcodein=79 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1407 bytes_read=12787 bytes_retransmit=19 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870970 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000
  197. Stats 96.3: gcodein=79 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=1413 bytes_read=12900 bytes_retransmit=19 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870971 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.7 pwm=0.000
  198. Stats 97.3: gcodein=79 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=1419 bytes_read=13014 bytes_retransmit=19 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870971 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.4 pwm=0.000
  199. Stats 98.3: gcodein=84 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=1425 bytes_read=13128 bytes_retransmit=19 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870972 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000
  200. Stats 99.3: gcodein=84 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=1431 bytes_read=13228 bytes_retransmit=19 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870972 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
  201. Stats 100.3: gcodein=84 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=1437 bytes_read=13342 bytes_retransmit=19 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15870973 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
  202. Stats 101.3: gcodein=84 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1443 bytes_read=13469 bytes_retransmit=19 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870973 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000
  203. Stats 102.3: gcodein=84 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1449 bytes_read=13569 bytes_retransmit=19 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870974 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.3 pwm=0.000
  204. Stats 103.3: gcodein=89 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1455 bytes_read=13683 bytes_retransmit=19 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870975 heater_bed: target=0 temp=32.0 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.0 pwm=0.000
  205. Stats 104.3: gcodein=89 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1461 bytes_read=13797 bytes_retransmit=19 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870975 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000
  206. Stats 105.3: gcodein=89 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1467 bytes_read=13897 bytes_retransmit=19 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870976 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
  207. Stats 106.3: gcodein=89 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1473 bytes_read=14024 bytes_retransmit=19 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870976 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
  208. Stats 107.3: gcodein=89 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1479 bytes_read=14138 bytes_retransmit=19 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870977 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000
  209. Stats 108.3: gcodein=94 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1485 bytes_read=14238 bytes_retransmit=19 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870978 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000
  210. Stats 109.4: gcodein=94 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1491 bytes_read=14338 bytes_retransmit=19 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870978 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000
  211. Stats 110.4: gcodein=94 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=1497 bytes_read=14452 bytes_retransmit=19 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870979 heater_bed: target=0 temp=31.9 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
  212. Stats 111.4: gcodein=94 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1503 bytes_read=14579 bytes_retransmit=19 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870979 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=81.586 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
  213. FORCE_MOVE stepper_y distance=10.000 velocity=10.000 accel=0.000
  214. Stats 112.4: gcodein=147 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1547 bytes_read=14689 bytes_retransmit=19 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870981 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=103.389 buffer_time=0.568 print_stall=0 extruder: target=0 temp=59.0 pwm=0.000
  215. Stats 113.4: gcodein=152 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1553 bytes_read=14803 bytes_retransmit=19 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870981 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000
  216. Stats 114.4: gcodein=152 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1559 bytes_read=14917 bytes_retransmit=19 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870982 heater_bed: target=0 temp=31.6 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
  217. Stats 115.4: gcodein=152 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1565 bytes_read=15017 bytes_retransmit=19 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870982 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
  218. Stats 116.4: gcodein=152 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1571 bytes_read=15144 bytes_retransmit=19 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870983 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
  219. Stats 117.4: gcodein=152 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1577 bytes_read=15258 bytes_retransmit=19 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15870983 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000
  220. Stats 118.4: gcodein=157 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1583 bytes_read=15358 bytes_retransmit=19 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870984 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000
  221. Stats 119.4: gcodein=157 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1589 bytes_read=15472 bytes_retransmit=19 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870985 heater_bed: target=0 temp=31.8 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
  222. Stats 120.4: gcodein=157 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1595 bytes_read=15586 bytes_retransmit=19 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870985 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
  223. Stats 121.4: gcodein=157 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1601 bytes_read=15699 bytes_retransmit=19 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870986 heater_bed: target=0 temp=31.6 pwm=0.000 print_time=103.389 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
  224. FORCE_MOVE stepper_x distance=10.000 velocity=10.000 accel=0.000
  225. Stats 122.4: gcodein=210 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1640 bytes_read=15804 bytes_retransmit=19 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870987 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=113.171 buffer_time=0.417 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
  226. Stats 123.4: gcodein=215 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1646 bytes_read=15932 bytes_retransmit=19 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870987 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=113.171 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
  227. Stats 124.4: gcodein=215 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1652 bytes_read=16032 bytes_retransmit=19 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870988 heater_bed: target=0 temp=31.6 pwm=0.000 print_time=113.171 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
  228. Stats 125.4: gcodein=215 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=1658 bytes_read=16132 bytes_retransmit=19 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870988 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=113.171 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.5 pwm=0.000
  229. Stats 126.4: gcodein=215 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=1664 bytes_read=16259 bytes_retransmit=19 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870989 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=113.171 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
  230. FORCE_MOVE stepper_z distance=10.000 velocity=10.000 accel=0.000
  231. Stats 127.4: gcodein=268 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=1713 bytes_read=16399 bytes_retransmit=19 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870990 heater_bed: target=0 temp=31.7 pwm=0.000 print_time=118.670 buffer_time=0.949 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000
  232. Stats 128.4: gcodein=273 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=1719 bytes_read=16499 bytes_retransmit=19 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870991 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
  233. Stats 129.4: gcodein=273 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=1725 bytes_read=16613 bytes_retransmit=19 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870991 heater_bed: target=0 temp=31.6 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
  234. Stats 130.4: gcodein=273 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000065 bytes_write=1731 bytes_read=16727 bytes_retransmit=19 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870991 heater_bed: target=0 temp=31.4 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.6 pwm=0.000
  235. Stats 131.4: gcodein=273 mcu: mcu_awake=0.007 mcu_task_avg=0.000080 mcu_task_stddev=0.000066 bytes_write=1737 bytes_read=16840 bytes_retransmit=19 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870992 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
  236. Stats 132.4: gcodein=273 mcu: mcu_awake=0.007 mcu_task_avg=0.000080 mcu_task_stddev=0.000066 bytes_write=1743 bytes_read=16954 bytes_retransmit=19 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870992 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000
  237. Stats 133.4: gcodein=278 mcu: mcu_awake=0.007 mcu_task_avg=0.000080 mcu_task_stddev=0.000066 bytes_write=1749 bytes_read=17068 bytes_retransmit=19 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870993 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000
  238. Stats 134.4: gcodein=278 mcu: mcu_awake=0.007 mcu_task_avg=0.000080 mcu_task_stddev=0.000066 bytes_write=1755 bytes_read=17168 bytes_retransmit=19 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870994 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.7 pwm=0.000
  239. Stats 135.4: gcodein=278 mcu: mcu_awake=0.007 mcu_task_avg=0.000080 mcu_task_stddev=0.000066 bytes_write=1761 bytes_read=17268 bytes_retransmit=19 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870994 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
  240. Stats 136.4: gcodein=278 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1767 bytes_read=17409 bytes_retransmit=19 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870995 heater_bed: target=0 temp=31.4 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
  241. Stats 137.4: gcodein=278 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1773 bytes_read=17509 bytes_retransmit=19 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870995 heater_bed: target=0 temp=31.5 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
  242. Stats 138.4: gcodein=283 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1779 bytes_read=17609 bytes_retransmit=19 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870996 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.0 pwm=0.000
  243. Stats 139.4: gcodein=283 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1785 bytes_read=17723 bytes_retransmit=19 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870996 heater_bed: target=0 temp=31.4 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
  244. Stats 140.4: gcodein=283 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1791 bytes_read=17837 bytes_retransmit=19 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870997 heater_bed: target=0 temp=31.2 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
  245. Stats 141.4: gcodein=283 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=1797 bytes_read=17937 bytes_retransmit=19 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870997 heater_bed: target=0 temp=31.2 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
  246. Stats 142.4: gcodein=283 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1803 bytes_read=18064 bytes_retransmit=19 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870997 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
  247. Stats 143.4: gcodein=288 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1809 bytes_read=18178 bytes_retransmit=19 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870998 heater_bed: target=0 temp=31.4 pwm=0.000 print_time=118.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
  248. Stats 144.4: gcodein=292 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=1996 bytes_read=18293 bytes_retransmit=19 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=134.975 buffer_time=0.375 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000
  249. Stats 145.4: gcodein=292 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=2002 bytes_read=18407 bytes_retransmit=19 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=134.975 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
  250. Stats 146.4: gcodein=292 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=2015 bytes_read=18535 bytes_retransmit=19 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.4 pwm=0.000 print_time=134.975 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
  251. Stats 147.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000096 bytes_write=2225 bytes_read=18707 bytes_retransmit=19 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.3 pwm=0.000 print_time=137.743 buffer_time=0.166 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
  252. Stats 148.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000096 bytes_write=2363 bytes_read=18865 bytes_retransmit=19 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.2 pwm=0.000 print_time=138.296 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000
  253. Stats 149.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000096 bytes_write=2566 bytes_read=19022 bytes_retransmit=19 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.2 pwm=0.000 print_time=139.368 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
  254. Stats 150.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000096 bytes_write=2679 bytes_read=19165 bytes_retransmit=19 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15871000 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000
  255. Stats 151.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000096 bytes_write=2692 bytes_read=19279 bytes_retransmit=19 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15871000 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
  256. Stats 152.4: gcodein=292 mcu: mcu_awake=0.014 mcu_task_avg=0.000112 mcu_task_stddev=0.000114 bytes_write=2705 bytes_read=19422 bytes_retransmit=19 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
  257. Stats 153.4: gcodein=292 mcu: mcu_awake=0.014 mcu_task_avg=0.000112 mcu_task_stddev=0.000114 bytes_write=2718 bytes_read=19550 bytes_retransmit=19 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15871000 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
  258. Stats 154.4: gcodein=292 mcu: mcu_awake=0.014 mcu_task_avg=0.000112 mcu_task_stddev=0.000114 bytes_write=2731 bytes_read=19664 bytes_retransmit=19 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
  259. Stats 155.4: gcodein=292 mcu: mcu_awake=0.014 mcu_task_avg=0.000112 mcu_task_stddev=0.000114 bytes_write=2744 bytes_read=19792 bytes_retransmit=19 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.0 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
  260. Stats 156.4: gcodein=292 mcu: mcu_awake=0.014 mcu_task_avg=0.000112 mcu_task_stddev=0.000114 bytes_write=2757 bytes_read=19920 bytes_retransmit=19 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.2 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
  261. Stats 157.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000072 bytes_write=2763 bytes_read=20033 bytes_retransmit=19 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
  262. Stats 158.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000072 bytes_write=2776 bytes_read=20161 bytes_retransmit=19 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.0 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
  263. Stats 159.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000072 bytes_write=2789 bytes_read=20289 bytes_retransmit=19 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870999 heater_bed: target=0 temp=31.0 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
  264. Stats 160.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000072 bytes_write=2802 bytes_read=20403 bytes_retransmit=19 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870998 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
  265. Stats 161.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000072 bytes_write=2815 bytes_read=20531 bytes_retransmit=19 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870998 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
  266. Stats 162.4: gcodein=292 mcu: mcu_awake=0.008 mcu_task_avg=0.000092 mcu_task_stddev=0.000075 bytes_write=2828 bytes_read=20672 bytes_retransmit=19 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870997 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.9 pwm=0.000
  267. Stats 163.4: gcodein=292 mcu: mcu_awake=0.008 mcu_task_avg=0.000092 mcu_task_stddev=0.000075 bytes_write=2841 bytes_read=20786 bytes_retransmit=19 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15870997 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.7 pwm=0.000
  268. Stats 164.4: gcodein=292 mcu: mcu_awake=0.008 mcu_task_avg=0.000092 mcu_task_stddev=0.000075 bytes_write=2854 bytes_read=20900 bytes_retransmit=19 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870996 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.6 pwm=0.000
  269. Stats 165.4: gcodein=292 mcu: mcu_awake=0.008 mcu_task_avg=0.000092 mcu_task_stddev=0.000075 bytes_write=2867 bytes_read=21028 bytes_retransmit=19 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870996 heater_bed: target=0 temp=31.0 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.5 pwm=0.000
  270. Stats 166.4: gcodein=292 mcu: mcu_awake=0.008 mcu_task_avg=0.000092 mcu_task_stddev=0.000075 bytes_write=2880 bytes_read=21156 bytes_retransmit=19 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870995 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.4 pwm=0.000
  271. Stats 167.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000074 bytes_write=2886 bytes_read=21269 bytes_retransmit=19 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870994 heater_bed: target=0 temp=31.1 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.3 pwm=0.000
  272. Stats 168.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000074 bytes_write=2899 bytes_read=21397 bytes_retransmit=19 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870993 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.1 pwm=0.000
  273. Stats 169.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000074 bytes_write=2912 bytes_read=21525 bytes_retransmit=19 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870992 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=49.0 pwm=0.000
  274. Stats 170.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000074 bytes_write=2925 bytes_read=21639 bytes_retransmit=19 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15870990 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.8 pwm=0.000
  275. Stats 171.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000093 mcu_task_stddev=0.000074 bytes_write=2938 bytes_read=21767 bytes_retransmit=19 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870989 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.6 pwm=0.000
  276. Stats 172.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000072 bytes_write=2951 bytes_read=21908 bytes_retransmit=19 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870987 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000
  277. Stats 173.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000072 bytes_write=2964 bytes_read=22022 bytes_retransmit=19 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870986 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=139.947 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000
  278. Stats 174.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000072 bytes_write=3091 bytes_read=22175 bytes_retransmit=19 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870984 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=164.859 buffer_time=0.486 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000
  279. Stats 175.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000072 bytes_write=3097 bytes_read=22289 bytes_retransmit=19 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870983 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.2 pwm=0.000
  280. Stats 176.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000072 bytes_write=3110 bytes_read=22403 bytes_retransmit=19 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=49 srtt=0.009 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870981 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.9 pwm=0.000
  281. Stats 177.4: gcodein=292 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000077 bytes_write=3131 bytes_read=22546 bytes_retransmit=19 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870979 heater_bed: target=0 temp=30.9 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.8 pwm=0.000
  282. Stats 178.4: gcodein=297 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000077 bytes_write=3137 bytes_read=22660 bytes_retransmit=19 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=49 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870977 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.5 pwm=0.000
  283. Stats 179.4: gcodein=297 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000077 bytes_write=3143 bytes_read=22774 bytes_retransmit=19 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870975 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.4 pwm=0.000
  284. Stats 180.4: gcodein=297 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000077 bytes_write=3149 bytes_read=22874 bytes_retransmit=19 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870973 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000
  285. Stats 181.4: gcodein=309 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000077 bytes_write=3155 bytes_read=22988 bytes_retransmit=19 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870970 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=164.859 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000
  286. Stats 182.4: gcodein=309 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000065 bytes_write=3202 bytes_read=23120 bytes_retransmit=19 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870968 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=174.526 buffer_time=2.211 print_stall=0 extruder: target=0 temp=47.2 pwm=0.000
  287. Stats 183.4: gcodein=314 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000065 bytes_write=3208 bytes_read=23220 bytes_retransmit=19 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870965 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=174.526 buffer_time=1.218 print_stall=0 extruder: target=0 temp=47.1 pwm=0.000
  288. Stats 184.4: gcodein=314 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000065 bytes_write=3214 bytes_read=23334 bytes_retransmit=19 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870963 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=174.526 buffer_time=0.224 print_stall=0 extruder: target=0 temp=46.9 pwm=0.000
  289. Stats 185.4: gcodein=314 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000065 bytes_write=3220 bytes_read=23448 bytes_retransmit=19 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870960 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=174.526 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.7 pwm=0.000
  290. Stats 186.4: gcodein=314 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000065 bytes_write=3226 bytes_read=23548 bytes_retransmit=19 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870958 heater_bed: target=0 temp=30.6 pwm=0.000 print_time=174.526 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.6 pwm=0.000
  291. Stats 187.4: gcodein=314 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3232 bytes_read=23675 bytes_retransmit=19 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870955 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=174.526 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000
  292. Stats 188.4: gcodein=319 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3238 bytes_read=23789 bytes_retransmit=19 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870952 heater_bed: target=0 temp=30.8 pwm=0.000 print_time=174.526 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.3 pwm=0.000
  293. Stats 189.4: gcodein=325 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3290 bytes_read=23910 bytes_retransmit=19 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870945 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=182.436 buffer_time=3.168 print_stall=0 extruder: target=0 temp=46.2 pwm=0.000
  294. Stats 190.4: gcodein=325 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3296 bytes_read=24010 bytes_retransmit=19 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870942 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=182.436 buffer_time=2.175 print_stall=0 extruder: target=0 temp=46.2 pwm=0.000
  295. Stats 191.4: gcodein=325 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3302 bytes_read=24138 bytes_retransmit=19 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870938 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=182.436 buffer_time=1.183 print_stall=0 extruder: target=0 temp=46.0 pwm=0.000
  296. Stats 192.4: gcodein=325 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3308 bytes_read=24251 bytes_retransmit=19 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870935 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.190 print_stall=0 extruder: target=0 temp=45.9 pwm=0.000
  297. Stats 193.4: gcodein=330 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3314 bytes_read=24351 bytes_retransmit=19 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870931 heater_bed: target=0 temp=30.7 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.8 pwm=0.000
  298. Stats 194.4: gcodein=330 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3320 bytes_read=24465 bytes_retransmit=19 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870927 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000
  299. Stats 195.4: gcodein=330 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3326 bytes_read=24579 bytes_retransmit=19 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870923 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000
  300. Stats 196.4: gcodein=330 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3332 bytes_read=24679 bytes_retransmit=19 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870919 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000
  301. Stats 197.4: gcodein=330 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=3338 bytes_read=24806 bytes_retransmit=19 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870915 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000
  302. Stats 198.4: gcodein=335 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=3344 bytes_read=24920 bytes_retransmit=19 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870911 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000
  303. Stats 199.4: gcodein=335 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=3350 bytes_read=25020 bytes_retransmit=19 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870907 heater_bed: target=0 temp=30.6 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000
  304. Stats 200.4: gcodein=335 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=3356 bytes_read=25134 bytes_retransmit=19 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870902 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.0 pwm=0.000
  305. Stats 201.4: gcodein=335 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=3362 bytes_read=25248 bytes_retransmit=19 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870898 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.6 pwm=0.000
  306. Stats 202.4: gcodein=335 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=3368 bytes_read=25361 bytes_retransmit=19 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870893 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.6 pwm=0.000
  307. Stats 203.4: gcodein=340 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=3374 bytes_read=25475 bytes_retransmit=19 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870888 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.5 pwm=0.000
  308. Stats 204.4: gcodein=340 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=3380 bytes_read=25589 bytes_retransmit=19 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870884 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.4 pwm=0.000
  309. Stats 205.4: gcodein=340 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=3386 bytes_read=25689 bytes_retransmit=19 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870879 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.1 pwm=0.000
  310. Stats 206.4: gcodein=340 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=3392 bytes_read=25789 bytes_retransmit=19 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870874 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.2 pwm=0.000
  311. Stats 207.4: gcodein=340 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3398 bytes_read=25916 bytes_retransmit=19 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870869 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.0 pwm=0.000
  312. Stats 208.4: gcodein=345 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3404 bytes_read=26030 bytes_retransmit=19 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870864 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.9 pwm=0.000
  313. Stats 209.4: gcodein=345 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3410 bytes_read=26130 bytes_retransmit=19 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870859 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=44.0 pwm=0.000
  314. Stats 210.4: gcodein=345 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3416 bytes_read=26244 bytes_retransmit=19 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870853 heater_bed: target=0 temp=30.6 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.8 pwm=0.000
  315. Stats 211.4: gcodein=345 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3422 bytes_read=26358 bytes_retransmit=19 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870848 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.6 pwm=0.000
  316. Stats 212.4: gcodein=345 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3428 bytes_read=26458 bytes_retransmit=19 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870843 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.4 pwm=0.000
  317. Stats 213.4: gcodein=350 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3434 bytes_read=26585 bytes_retransmit=19 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870838 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.4 pwm=0.000
  318. Stats 214.4: gcodein=350 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3440 bytes_read=26699 bytes_retransmit=19 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870832 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.1 pwm=0.000
  319. Stats 215.4: gcodein=350 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3446 bytes_read=26799 bytes_retransmit=19 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=49 srtt=0.007 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870826 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.0 pwm=0.000
  320. Stats 216.4: gcodein=350 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3452 bytes_read=26913 bytes_retransmit=19 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870820 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.0 pwm=0.000
  321. Stats 217.4: gcodein=350 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3458 bytes_read=27027 bytes_retransmit=19 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870815 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=43.0 pwm=0.000
  322. Stats 218.4: gcodein=355 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3464 bytes_read=27140 bytes_retransmit=19 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870809 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.8 pwm=0.000
  323. Stats 219.4: gcodein=355 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3470 bytes_read=27240 bytes_retransmit=19 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870803 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.7 pwm=0.000
  324. Stats 220.5: gcodein=355 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3476 bytes_read=27368 bytes_retransmit=19 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870797 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.6 pwm=0.000
  325. Stats 221.5: gcodein=355 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3482 bytes_read=27468 bytes_retransmit=19 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870791 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.6 pwm=0.000
  326. Stats 222.5: gcodein=355 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3488 bytes_read=27568 bytes_retransmit=19 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870785 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.4 pwm=0.000
  327. Stats 223.5: gcodein=360 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3494 bytes_read=27695 bytes_retransmit=19 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870778 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.4 pwm=0.000
  328. Stats 224.5: gcodein=360 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3500 bytes_read=27809 bytes_retransmit=19 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870772 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.2 pwm=0.000
  329. Stats 225.5: gcodein=360 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3506 bytes_read=27909 bytes_retransmit=19 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870766 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=42.0 pwm=0.000
  330. Stats 226.5: gcodein=360 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3512 bytes_read=28023 bytes_retransmit=19 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870760 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.9 pwm=0.000
  331. Stats 227.5: gcodein=360 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3518 bytes_read=28137 bytes_retransmit=19 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870753 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.9 pwm=0.000
  332. Stats 228.5: gcodein=365 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3524 bytes_read=28250 bytes_retransmit=19 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870747 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.7 pwm=0.000
  333. Stats 229.5: gcodein=365 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3530 bytes_read=28364 bytes_retransmit=19 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870740 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.6 pwm=0.000
  334. Stats 230.5: gcodein=365 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3536 bytes_read=28478 bytes_retransmit=19 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870734 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.6 pwm=0.000
  335. Stats 231.5: gcodein=365 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3542 bytes_read=28578 bytes_retransmit=19 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870727 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.4 pwm=0.000
  336. Stats 232.5: gcodein=365 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3548 bytes_read=28692 bytes_retransmit=19 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870721 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000
  337. Stats 233.5: gcodein=370 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3554 bytes_read=28819 bytes_retransmit=19 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870714 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.2 pwm=0.000
  338. Stats 234.5: gcodein=370 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3560 bytes_read=28919 bytes_retransmit=19 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870707 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=41.3 pwm=0.000
  339. Stats 235.5: gcodein=370 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3566 bytes_read=29019 bytes_retransmit=19 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870700 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000
  340. Stats 236.5: gcodein=370 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3572 bytes_read=29133 bytes_retransmit=19 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870693 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.9 pwm=0.000
  341. Stats 237.5: gcodein=370 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3578 bytes_read=29247 bytes_retransmit=19 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870686 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.6 pwm=0.000
  342. Stats 238.5: gcodein=375 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3584 bytes_read=29360 bytes_retransmit=19 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870679 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.7 pwm=0.000
  343. Stats 239.5: gcodein=375 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3590 bytes_read=29474 bytes_retransmit=19 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870672 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.6 pwm=0.000
  344. Stats 240.5: gcodein=375 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3596 bytes_read=29588 bytes_retransmit=19 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870665 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000
  345. Stats 241.5: gcodein=375 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3602 bytes_read=29688 bytes_retransmit=19 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870658 heater_bed: target=0 temp=30.4 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.4 pwm=0.000
  346. Stats 242.5: gcodein=375 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=3608 bytes_read=29802 bytes_retransmit=19 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870651 heater_bed: target=0 temp=30.5 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.4 pwm=0.000
  347. Stats 243.5: gcodein=380 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3614 bytes_read=29929 bytes_retransmit=19 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15870644 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.5 pwm=0.000
  348. Stats 244.5: gcodein=380 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3620 bytes_read=30029 bytes_retransmit=19 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870637 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.3 pwm=0.000
  349. Stats 245.5: gcodein=380 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3626 bytes_read=30143 bytes_retransmit=19 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870629 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000
  350. Stats 246.5: gcodein=380 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3632 bytes_read=30257 bytes_retransmit=19 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870622 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=40.2 pwm=0.000
  351. Stats 247.5: gcodein=380 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=3638 bytes_read=30357 bytes_retransmit=19 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870615 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000
  352. Stats 248.5: gcodein=385 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3644 bytes_read=30484 bytes_retransmit=19 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870607 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.8 pwm=0.000
  353. Stats 249.5: gcodein=385 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3650 bytes_read=30584 bytes_retransmit=19 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870600 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.5 pwm=0.000
  354. Stats 250.5: gcodein=385 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3662 bytes_read=30714 bytes_retransmit=19 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870585 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
  355. Stats 251.5: gcodein=385 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3668 bytes_read=30814 bytes_retransmit=19 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870578 heater_bed: target=0 temp=30.3 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
  356. Stats 252.5: gcodein=385 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=3674 bytes_read=30928 bytes_retransmit=19 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870570 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=182.436 buffer_time=0.000 print_stall=0 extruder: target=0 temp=39.6 pwm=0.000
  357. Stats 263.5: gcodein=412 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000068 bytes_write=3787 bytes_read=32170 bytes_retransmit=19 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=15870486 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=255.843 buffer_time=3.097 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000
  358. Stats 264.5: gcodein=412 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000068 bytes_write=3815 bytes_read=32270 bytes_retransmit=19 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870479 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=255.843 buffer_time=2.104 print_stall=0 extruder: target=0 temp=38.6 pwm=0.000
  359. Stats 265.5: gcodein=412 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000068 bytes_write=3821 bytes_read=32384 bytes_retransmit=19 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870471 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=255.843 buffer_time=1.111 print_stall=0 extruder: target=0 temp=38.4 pwm=0.000
  360. Stats 266.5: gcodein=412 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000068 bytes_write=3827 bytes_read=32498 bytes_retransmit=19 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870463 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.117 print_stall=0 extruder: target=0 temp=38.3 pwm=0.000
  361. Stats 267.5: gcodein=412 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000068 bytes_write=3833 bytes_read=32598 bytes_retransmit=19 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870455 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000
  362. Stats 268.5: gcodein=417 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3839 bytes_read=32725 bytes_retransmit=19 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870447 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.1 pwm=0.000
  363. Stats 269.5: gcodein=417 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3845 bytes_read=32839 bytes_retransmit=19 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870440 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000
  364. Stats 270.5: gcodein=417 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3851 bytes_read=32939 bytes_retransmit=19 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870432 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=38.0 pwm=0.000
  365. Stats 271.5: gcodein=417 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3857 bytes_read=33053 bytes_retransmit=19 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870424 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000
  366. Stats 272.5: gcodein=417 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3863 bytes_read=33167 bytes_retransmit=19 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870416 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000
  367. Stats 273.5: gcodein=422 mcu: mcu_awake=0.007 mcu_task_avg=0.000081 mcu_task_stddev=0.000070 bytes_write=3869 bytes_read=33267 bytes_retransmit=19 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870408 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.9 pwm=0.000
  368. Stats 274.5: gcodein=422 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3875 bytes_read=33394 bytes_retransmit=19 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870400 heater_bed: target=0 temp=30.1 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000
  369. Stats 275.5: gcodein=422 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3881 bytes_read=33502 bytes_retransmit=19 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870392 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.8 pwm=0.000
  370. Stats 276.5: gcodein=422 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3887 bytes_read=33595 bytes_retransmit=19 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870384 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.4 pwm=0.000
  371. Stats 277.5: gcodein=422 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3893 bytes_read=33688 bytes_retransmit=19 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870376 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.5 pwm=0.000
  372. Stats 278.5: gcodein=427 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=3899 bytes_read=33794 bytes_retransmit=19 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870368 heater_bed: target=0 temp=29.9 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.6 pwm=0.000
  373. Stats 279.5: gcodein=427 mcu: mcu_awake=0.006 mcu_task_avg=0.000070 mcu_task_stddev=0.000056 bytes_write=3905 bytes_read=33911 bytes_retransmit=19 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870361 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.4 pwm=0.000
  374. Stats 280.5: gcodein=427 mcu: mcu_awake=0.006 mcu_task_avg=0.000070 mcu_task_stddev=0.000056 bytes_write=3911 bytes_read=34004 bytes_retransmit=19 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870353 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.4 pwm=0.000
  375. Stats 281.5: gcodein=427 mcu: mcu_awake=0.006 mcu_task_avg=0.000070 mcu_task_stddev=0.000056 bytes_write=3917 bytes_read=34110 bytes_retransmit=19 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870345 heater_bed: target=0 temp=30.2 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.2 pwm=0.000
  376. Stats 282.5: gcodein=427 mcu: mcu_awake=0.006 mcu_task_avg=0.000070 mcu_task_stddev=0.000056 bytes_write=3923 bytes_read=34216 bytes_retransmit=19 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870337 heater_bed: target=0 temp=29.9 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.2 pwm=0.000
  377. Stats 283.5: gcodein=432 mcu: mcu_awake=0.006 mcu_task_avg=0.000070 mcu_task_stddev=0.000056 bytes_write=3929 bytes_read=34309 bytes_retransmit=19 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870329 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.0 pwm=0.000
  378. Stats 284.5: gcodein=432 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=3935 bytes_read=34428 bytes_retransmit=19 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870321 heater_bed: target=0 temp=29.8 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=37.0 pwm=0.000
  379. Stats 285.5: gcodein=432 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=3941 bytes_read=34534 bytes_retransmit=19 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870313 heater_bed: target=0 temp=29.6 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.6 pwm=0.000
  380. Stats 286.5: gcodein=432 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=3947 bytes_read=34627 bytes_retransmit=19 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870305 heater_bed: target=0 temp=29.8 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.8 pwm=0.000
  381. Stats 287.5: gcodein=432 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=3953 bytes_read=34733 bytes_retransmit=19 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870297 heater_bed: target=0 temp=29.9 pwm=0.000 print_time=255.843 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.7 pwm=0.000
  382. Stats 288.5: gcodein=447 mcu: mcu_awake=0.006 mcu_task_avg=0.000069 mcu_task_stddev=0.000057 bytes_write=3973 bytes_read=34844 bytes_retransmit=19 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870289 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=36.7 pwm=1.000
  383. Heater extruder approaching new target of 220.000
  384. Stats 289.5: gcodein=452 mcu: mcu_awake=0.006 mcu_task_avg=0.000071 mcu_task_stddev=0.000056 bytes_write=3979 bytes_read=34950 bytes_retransmit=19 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870281 heater_bed: target=0 temp=29.7 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=36.6 pwm=1.000
  385. Stats 290.5: gcodein=457 mcu: mcu_awake=0.006 mcu_task_avg=0.000071 mcu_task_stddev=0.000056 bytes_write=3985 bytes_read=35056 bytes_retransmit=19 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870273 heater_bed: target=0 temp=29.8 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=36.6 pwm=1.000
  386. Stats 291.5: gcodein=462 mcu: mcu_awake=0.006 mcu_task_avg=0.000071 mcu_task_stddev=0.000056 bytes_write=3991 bytes_read=35149 bytes_retransmit=19 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870265 heater_bed: target=0 temp=29.6 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=36.6 pwm=1.000
  387. Stats 292.5: gcodein=467 mcu: mcu_awake=0.006 mcu_task_avg=0.000071 mcu_task_stddev=0.000056 bytes_write=4011 bytes_read=35266 bytes_retransmit=19 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870257 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=36.9 pwm=1.000
  388. Stats 293.5: gcodein=472 mcu: mcu_awake=0.006 mcu_task_avg=0.000071 mcu_task_stddev=0.000056 bytes_write=4017 bytes_read=35366 bytes_retransmit=19 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870251 heater_bed: target=0 temp=30.0 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=37.4 pwm=1.000
  389. Stats 294.5: gcodein=477 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000059 bytes_write=4023 bytes_read=35493 bytes_retransmit=19 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870243 heater_bed: target=0 temp=29.7 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=37.9 pwm=1.000
  390. Stats 295.5: gcodein=482 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000059 bytes_write=4029 bytes_read=35607 bytes_retransmit=19 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870235 heater_bed: target=0 temp=29.8 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=39.0 pwm=1.000
  391. Stats 296.5: gcodein=487 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000059 bytes_write=4035 bytes_read=35707 bytes_retransmit=19 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870227 heater_bed: target=0 temp=29.7 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=39.8 pwm=1.000
  392. Stats 297.5: gcodein=492 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000059 bytes_write=4055 bytes_read=35826 bytes_retransmit=19 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870219 heater_bed: target=0 temp=29.7 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=40.7 pwm=1.000
  393. Stats 298.5: gcodein=497 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000059 bytes_write=4061 bytes_read=35940 bytes_retransmit=19 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870211 heater_bed: target=0 temp=29.9 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=42.5 pwm=1.000
  394. Stats 299.5: gcodein=502 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=4067 bytes_read=36053 bytes_retransmit=19 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870203 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=44.1 pwm=1.000
  395. Stats 300.5: gcodein=507 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=4073 bytes_read=36167 bytes_retransmit=19 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870196 heater_bed: target=0 temp=29.8 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=45.5 pwm=1.000
  396. Stats 301.5: gcodein=512 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=4093 bytes_read=36286 bytes_retransmit=19 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870188 heater_bed: target=0 temp=29.6 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=47.6 pwm=1.000
  397. Stats 302.5: gcodein=517 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=4099 bytes_read=36386 bytes_retransmit=19 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870180 heater_bed: target=0 temp=29.7 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=49.5 pwm=1.000
  398. Stats 303.5: gcodein=522 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=4105 bytes_read=36500 bytes_retransmit=19 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870172 heater_bed: target=0 temp=29.9 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=51.6 pwm=1.000
  399. Stats 304.5: gcodein=527 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4111 bytes_read=36627 bytes_retransmit=19 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870165 heater_bed: target=0 temp=29.7 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=54.1 pwm=1.000
  400. Stats 305.6: gcodein=532 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4131 bytes_read=36732 bytes_retransmit=19 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870157 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=56.2 pwm=1.000
  401. Stats 306.6: gcodein=537 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4137 bytes_read=36832 bytes_retransmit=19 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870150 heater_bed: target=0 temp=29.6 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=58.5 pwm=1.000
  402. Stats 307.6: gcodein=542 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4143 bytes_read=36960 bytes_retransmit=19 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870142 heater_bed: target=0 temp=29.6 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=61.5 pwm=1.000
  403. Stats 308.6: gcodein=547 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4149 bytes_read=37060 bytes_retransmit=19 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870135 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=64.0 pwm=1.000
  404. Stats 309.6: gcodein=552 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4169 bytes_read=37178 bytes_retransmit=19 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870127 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=66.3 pwm=1.000
  405. Stats 310.6: gcodein=557 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4181 bytes_read=37292 bytes_retransmit=19 bytes_invalid=0 send_seq=476 receive_seq=475 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870119 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=68.8 pwm=1.000
  406. Stats 311.6: gcodein=562 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4187 bytes_read=37422 bytes_retransmit=19 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870104 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=72.1 pwm=1.000
  407. Stats 312.6: gcodein=572 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4193 bytes_read=37522 bytes_retransmit=19 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870097 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=74.5 pwm=1.000
  408. Stats 313.6: gcodein=577 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000063 bytes_write=4199 bytes_read=37636 bytes_retransmit=19 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870089 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=77.0 pwm=1.000
  409. Stats 314.6: gcodein=582 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4219 bytes_read=37768 bytes_retransmit=19 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870082 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=80.4 pwm=1.000
  410. Stats 315.6: gcodein=587 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4225 bytes_read=37868 bytes_retransmit=19 bytes_invalid=0 send_seq=482 receive_seq=482 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870074 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=83.0 pwm=1.000
  411. Stats 316.6: gcodein=592 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4231 bytes_read=37982 bytes_retransmit=19 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15870067 heater_bed: target=0 temp=29.6 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=85.6 pwm=1.000
  412. Stats 317.6: gcodein=597 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4237 bytes_read=38096 bytes_retransmit=19 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870060 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=89.1 pwm=1.000
  413. Stats 318.6: gcodein=602 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4257 bytes_read=38201 bytes_retransmit=19 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870052 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.7 pwm=1.000
  414. Stats 319.6: gcodein=607 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4263 bytes_read=38314 bytes_retransmit=19 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15870045 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=94.3 pwm=1.000
  415. Stats 320.6: gcodein=612 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4269 bytes_read=38442 bytes_retransmit=19 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870038 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=97.8 pwm=1.000
  416. Stats 321.6: gcodein=617 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4275 bytes_read=38542 bytes_retransmit=19 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15870031 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=277.312 buffer_time=0.000 print_stall=0 extruder: target=220 temp=100.4 pwm=1.000
  417. Stats 322.6: gcodein=640 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4482 bytes_read=38662 bytes_retransmit=19 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=16 stalled_bytes=0 freq=15870024 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=312.423 buffer_time=1.091 print_stall=0 extruder: target=220 temp=103.0 pwm=1.000
  418. Stats 323.6: gcodein=645 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4504 bytes_read=38776 bytes_retransmit=19 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15870017 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=312.423 buffer_time=0.098 print_stall=0 extruder: target=220 temp=105.6 pwm=1.000
  419. Stats 324.6: gcodein=650 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000099 bytes_write=4510 bytes_read=38904 bytes_retransmit=19 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15870010 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=109.0 pwm=1.000
  420. Stats 325.6: gcodein=655 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000099 bytes_write=4516 bytes_read=39004 bytes_retransmit=19 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15870003 heater_bed: target=0 temp=29.5 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=111.6 pwm=1.000
  421. Stats 326.6: gcodein=660 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000099 bytes_write=4531 bytes_read=39118 bytes_retransmit=19 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869995 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=114.2 pwm=1.000
  422. Stats 327.6: gcodein=665 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000099 bytes_write=4537 bytes_read=39232 bytes_retransmit=19 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869988 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=117.5 pwm=1.000
  423. Stats 328.6: gcodein=670 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000099 bytes_write=4543 bytes_read=39332 bytes_retransmit=19 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869981 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=120.1 pwm=1.000
  424. Stats 329.6: gcodein=675 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4549 bytes_read=39459 bytes_retransmit=19 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869973 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=122.6 pwm=1.000
  425. Stats 330.6: gcodein=680 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4555 bytes_read=39573 bytes_retransmit=19 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=9 stalled_bytes=0 freq=15869966 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=125.8 pwm=1.000
  426. Stats 331.6: gcodein=685 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4575 bytes_read=39678 bytes_retransmit=19 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869959 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=128.4 pwm=1.000
  427. Stats 332.6: gcodein=690 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4581 bytes_read=39792 bytes_retransmit=19 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869952 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=130.8 pwm=1.000
  428. Stats 333.6: gcodein=695 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4587 bytes_read=39906 bytes_retransmit=19 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869945 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=134.0 pwm=1.000
  429. Stats 334.6: gcodein=700 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4593 bytes_read=40006 bytes_retransmit=19 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869938 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=136.5 pwm=1.000
  430. Stats 335.6: gcodein=705 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=4613 bytes_read=40124 bytes_retransmit=19 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869931 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=138.9 pwm=1.000
  431. Stats 336.6: gcodein=710 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=4619 bytes_read=40238 bytes_retransmit=19 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869924 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=141.3 pwm=1.000
  432. Stats 337.6: gcodein=715 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=4625 bytes_read=40352 bytes_retransmit=19 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869917 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=144.4 pwm=1.000
  433. Stats 338.6: gcodein=720 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=4631 bytes_read=40452 bytes_retransmit=19 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869910 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=146.9 pwm=1.000
  434. Stats 339.6: gcodein=725 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000062 bytes_write=4651 bytes_read=40571 bytes_retransmit=19 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869902 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=149.2 pwm=1.000
  435. Stats 340.6: gcodein=730 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4657 bytes_read=40698 bytes_retransmit=19 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869896 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=152.5 pwm=1.000
  436. Stats 341.6: gcodein=735 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4663 bytes_read=40798 bytes_retransmit=19 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869889 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=154.9 pwm=1.000
  437. Stats 342.6: gcodein=740 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4669 bytes_read=40912 bytes_retransmit=19 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869882 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=157.2 pwm=1.000
  438. Stats 343.6: gcodein=745 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4689 bytes_read=41031 bytes_retransmit=19 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869875 heater_bed: target=0 temp=29.4 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=160.3 pwm=1.000
  439. Stats 344.6: gcodein=750 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000063 bytes_write=4695 bytes_read=41131 bytes_retransmit=19 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869869 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=162.6 pwm=1.000
  440. Stats 345.6: gcodein=755 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=4701 bytes_read=41258 bytes_retransmit=19 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869862 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=165.1 pwm=1.000
  441. Stats 346.6: gcodein=760 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=4707 bytes_read=41372 bytes_retransmit=19 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869855 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.2 pwm=1.000
  442. Stats 347.6: gcodein=765 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=4727 bytes_read=41477 bytes_retransmit=19 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869848 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=170.4 pwm=1.000
  443. Stats 348.6: gcodein=770 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=4733 bytes_read=41591 bytes_retransmit=19 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869842 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=312.423 buffer_time=0.000 print_stall=0 extruder: target=220 temp=172.9 pwm=1.000
  444. Stats 349.6: gcodein=786 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=4764 bytes_read=41696 bytes_retransmit=19 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869835 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=353.229 buffer_time=15.078 print_stall=0 extruder: target=220 temp=175.0 pwm=1.000
  445. Stats 350.6: gcodein=791 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000065 bytes_write=4770 bytes_read=41823 bytes_retransmit=19 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869829 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=14.085 print_stall=0 extruder: target=220 temp=178.0 pwm=1.000
  446. Stats 351.6: gcodein=796 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000065 bytes_write=4776 bytes_read=41923 bytes_retransmit=19 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869822 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=13.092 print_stall=0 extruder: target=220 temp=180.3 pwm=1.000
  447. Stats 352.6: gcodein=801 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000065 bytes_write=4796 bytes_read=42042 bytes_retransmit=19 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869815 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=12.098 print_stall=0 extruder: target=220 temp=182.3 pwm=1.000
  448. Stats 353.6: gcodein=806 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000065 bytes_write=4802 bytes_read=42156 bytes_retransmit=19 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869809 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=353.229 buffer_time=11.105 print_stall=0 extruder: target=220 temp=185.3 pwm=1.000
  449. Stats 354.6: gcodein=811 mcu: mcu_awake=0.007 mcu_task_avg=0.000079 mcu_task_stddev=0.000065 bytes_write=4808 bytes_read=42256 bytes_retransmit=19 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869802 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=10.111 print_stall=0 extruder: target=220 temp=187.3 pwm=1.000
  450. Stats 355.6: gcodein=816 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4814 bytes_read=42383 bytes_retransmit=19 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869796 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=353.229 buffer_time=9.118 print_stall=0 extruder: target=220 temp=189.7 pwm=1.000
  451. Stats 356.6: gcodein=821 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4834 bytes_read=42502 bytes_retransmit=19 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869789 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=8.125 print_stall=0 extruder: target=220 temp=192.4 pwm=1.000
  452. Stats 357.6: gcodein=826 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4840 bytes_read=42602 bytes_retransmit=19 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869783 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=353.229 buffer_time=7.131 print_stall=0 extruder: target=220 temp=194.6 pwm=1.000
  453. Stats 358.6: gcodein=831 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4860 bytes_read=42721 bytes_retransmit=19 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869777 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=6.138 print_stall=0 extruder: target=220 temp=197.2 pwm=0.895
  454. Stats 359.6: gcodein=836 mcu: mcu_awake=0.007 mcu_task_avg=0.000078 mcu_task_stddev=0.000064 bytes_write=4894 bytes_read=42845 bytes_retransmit=19 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.033 ready_bytes=9 stalled_bytes=0 freq=15869770 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=5.145 print_stall=0 extruder: target=220 temp=199.7 pwm=0.845
  455. Stats 360.6: gcodein=841 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000065 bytes_write=4956 bytes_read=42978 bytes_retransmit=19 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869764 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=4.151 print_stall=0 extruder: target=220 temp=201.8 pwm=0.740
  456. Stats 361.6: gcodein=846 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000065 bytes_write=4962 bytes_read=43092 bytes_retransmit=19 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869758 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=353.229 buffer_time=3.158 print_stall=0 extruder: target=220 temp=203.5 pwm=0.740
  457. Stats 362.6: gcodein=851 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000065 bytes_write=4996 bytes_read=43216 bytes_retransmit=19 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869751 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=353.229 buffer_time=2.165 print_stall=0 extruder: target=220 temp=206.3 pwm=0.576
  458. Stats 363.6: gcodein=856 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000065 bytes_write=5016 bytes_read=43321 bytes_retransmit=19 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=49 srtt=0.011 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869745 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=353.229 buffer_time=1.171 print_stall=0 extruder: target=220 temp=207.9 pwm=0.509
  459. Stats 364.6: gcodein=861 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000065 bytes_write=5049 bytes_read=43431 bytes_retransmit=19 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869739 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=0.178 print_stall=0 extruder: target=220 temp=210.3 pwm=0.249
  460. Stats 365.6: gcodein=866 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000066 bytes_write=5055 bytes_read=43573 bytes_retransmit=19 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869733 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.3 pwm=0.249
  461. Stats 366.6: gcodein=871 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000066 bytes_write=5074 bytes_read=43678 bytes_retransmit=19 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15869727 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.0 pwm=0.172
  462. Stats 367.6: gcodein=876 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000066 bytes_write=5080 bytes_read=43778 bytes_retransmit=19 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869721 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=215.1 pwm=0.172
  463. Stats 368.6: gcodein=881 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000066 bytes_write=5112 bytes_read=43902 bytes_retransmit=19 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869714 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.6 pwm=0.109
  464. Heater extruder within range of 220.000
  465. Stats 369.6: gcodein=886 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000066 bytes_write=5144 bytes_read=44026 bytes_retransmit=19 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869708 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.9 pwm=0.149
  466. Stats 370.6: gcodein=891 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000067 bytes_write=5176 bytes_read=44150 bytes_retransmit=19 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869702 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.8 pwm=0.128
  467. Stats 371.6: gcodein=896 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000067 bytes_write=5214 bytes_read=44274 bytes_retransmit=19 bytes_invalid=0 send_seq=573 receive_seq=572 retransmit_seq=49 srtt=0.008 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=0 freq=15869697 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.3 pwm=0.154
  468. Stats 372.6: gcodein=901 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000067 bytes_write=5241 bytes_read=44409 bytes_retransmit=19 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869685 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.164
  469. Stats 373.6: gcodein=906 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000067 bytes_write=5260 bytes_read=44514 bytes_retransmit=19 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869679 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.239
  470. Stats 374.6: gcodein=911 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000067 bytes_write=5279 bytes_read=44633 bytes_retransmit=19 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869673 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.158
  471. Stats 375.6: gcodein=916 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000066 bytes_write=5325 bytes_read=44776 bytes_retransmit=19 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869667 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.379
  472. Stats 376.6: gcodein=921 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000066 bytes_write=5353 bytes_read=44881 bytes_retransmit=19 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869662 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.390
  473. Stats 377.6: gcodein=926 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000066 bytes_write=5359 bytes_read=44981 bytes_retransmit=19 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869656 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.390
  474. Stats 378.6: gcodein=931 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000066 bytes_write=5393 bytes_read=45119 bytes_retransmit=19 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15869650 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.398
  475. Stats 379.6: gcodein=936 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000066 bytes_write=5426 bytes_read=45229 bytes_retransmit=19 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869644 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=353.229 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.438
  476. Stats 380.6: gcodein=953 mcu: mcu_awake=0.009 mcu_task_avg=0.000090 mcu_task_stddev=0.000085 bytes_write=5549 bytes_read=45353 bytes_retransmit=19 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869640 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=369.162 buffer_time=0.230 print_stall=0 extruder: target=220 temp=220.9 pwm=0.453
  477. Stats 381.6: gcodein=958 mcu: mcu_awake=0.009 mcu_task_avg=0.000090 mcu_task_stddev=0.000085 bytes_write=5597 bytes_read=45482 bytes_retransmit=19 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869635 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.536
  478. Stats 382.6: gcodein=963 mcu: mcu_awake=0.009 mcu_task_avg=0.000090 mcu_task_stddev=0.000085 bytes_write=5631 bytes_read=45606 bytes_retransmit=19 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869629 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.519
  479. Stats 383.6: gcodein=968 mcu: mcu_awake=0.009 mcu_task_avg=0.000090 mcu_task_stddev=0.000085 bytes_write=5665 bytes_read=45716 bytes_retransmit=19 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869623 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.526
  480. Stats 384.6: gcodein=973 mcu: mcu_awake=0.009 mcu_task_avg=0.000090 mcu_task_stddev=0.000085 bytes_write=5699 bytes_read=45840 bytes_retransmit=19 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869617 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.391
  481. Stats 385.6: gcodein=978 mcu: mcu_awake=0.009 mcu_task_avg=0.000090 mcu_task_stddev=0.000085 bytes_write=5733 bytes_read=45964 bytes_retransmit=19 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869611 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.553
  482. Stats 386.6: gcodein=983 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5767 bytes_read=46088 bytes_retransmit=19 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=49 srtt=0.007 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869605 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.528
  483. Stats 387.7: gcodein=988 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5787 bytes_read=46207 bytes_retransmit=19 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869599 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.417
  484. Stats 388.7: gcodein=993 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5807 bytes_read=46326 bytes_retransmit=19 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15869592 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=369.162 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.423
  485. Stats 389.7: gcodein=1009 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5851 bytes_read=46436 bytes_retransmit=19 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869587 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=2.513 print_stall=0 extruder: target=220 temp=220.5 pwm=0.423
  486. Stats 390.7: gcodein=1014 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5884 bytes_read=46560 bytes_retransmit=19 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869581 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=1.519 print_stall=0 extruder: target=220 temp=220.8 pwm=0.367
  487. Stats 391.7: gcodein=1019 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5904 bytes_read=46693 bytes_retransmit=19 bytes_invalid=0 send_seq=626 receive_seq=626 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869575 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.526 print_stall=0 extruder: target=220 temp=220.5 pwm=0.469
  488. Stats 392.7: gcodein=1024 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5937 bytes_read=46803 bytes_retransmit=19 bytes_invalid=0 send_seq=629 receive_seq=629 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869569 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.419
  489. Stats 393.7: gcodein=1029 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=5970 bytes_read=46913 bytes_retransmit=19 bytes_invalid=0 send_seq=632 receive_seq=632 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869563 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.402
  490. Stats 394.7: gcodein=1034 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=6002 bytes_read=47037 bytes_retransmit=19 bytes_invalid=0 send_seq=635 receive_seq=635 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869557 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.365
  491. Stats 395.7: gcodein=1039 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=6008 bytes_read=47151 bytes_retransmit=19 bytes_invalid=0 send_seq=636 receive_seq=636 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869551 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.365
  492. Stats 396.7: gcodein=1044 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000064 bytes_write=6014 bytes_read=47264 bytes_retransmit=19 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869546 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.365
  493. Stats 397.7: gcodein=1049 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000064 bytes_write=6033 bytes_read=47383 bytes_retransmit=19 bytes_invalid=0 send_seq=639 receive_seq=639 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869540 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.306
  494. Stats 398.7: gcodein=1054 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000064 bytes_write=6053 bytes_read=47502 bytes_retransmit=19 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869534 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.410
  495. Stats 399.7: gcodein=1059 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000064 bytes_write=6072 bytes_read=47607 bytes_retransmit=19 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869528 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.303
  496. Stats 400.7: gcodein=1064 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000064 bytes_write=6119 bytes_read=47736 bytes_retransmit=19 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869522 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.401
  497. Stats 401.7: gcodein=1069 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=6138 bytes_read=47868 bytes_retransmit=19 bytes_invalid=0 send_seq=649 receive_seq=649 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=9 stalled_bytes=0 freq=15869516 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.484
  498. Stats 402.7: gcodein=1074 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=6198 bytes_read=47988 bytes_retransmit=19 bytes_invalid=0 send_seq=654 receive_seq=654 retransmit_seq=49 srtt=0.007 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869511 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.336
  499. Stats 403.7: gcodein=1079 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=6226 bytes_read=48107 bytes_retransmit=19 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869505 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=380.384 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.236
  500. Stats 404.7: gcodein=1096 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=6344 bytes_read=48231 bytes_retransmit=19 bytes_invalid=0 send_seq=660 receive_seq=659 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869499 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=393.029 buffer_time=0.258 print_stall=0 extruder: target=220 temp=220.9 pwm=0.414
  501. Stats 405.7: gcodein=1101 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=6377 bytes_read=48346 bytes_retransmit=19 bytes_invalid=0 send_seq=663 receive_seq=663 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869494 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=393.029 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.445
  502. Stats 406.7: gcodein=1106 mcu: mcu_awake=0.009 mcu_task_avg=0.000089 mcu_task_stddev=0.000078 bytes_write=6383 bytes_read=48474 bytes_retransmit=19 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869488 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=393.029 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.445
  503. Stats 407.7: gcodein=1111 mcu: mcu_awake=0.009 mcu_task_avg=0.000089 mcu_task_stddev=0.000078 bytes_write=6411 bytes_read=48593 bytes_retransmit=19 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15869483 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=393.029 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.487
  504. Stats 408.7: gcodein=1116 mcu: mcu_awake=0.009 mcu_task_avg=0.000089 mcu_task_stddev=0.000078 bytes_write=6458 bytes_read=48708 bytes_retransmit=19 bytes_invalid=0 send_seq=670 receive_seq=670 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869477 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=393.029 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.524
  505. Stats 409.7: gcodein=1121 mcu: mcu_awake=0.009 mcu_task_avg=0.000089 mcu_task_stddev=0.000078 bytes_write=6505 bytes_read=48823 bytes_retransmit=19 bytes_invalid=0 send_seq=674 receive_seq=674 retransmit_seq=49 srtt=0.007 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15869472 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=393.029 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.373
  506. Stats 410.7: gcodein=1139 mcu: mcu_awake=0.009 mcu_task_avg=0.000089 mcu_task_stddev=0.000078 bytes_write=6602 bytes_read=48952 bytes_retransmit=19 bytes_invalid=0 send_seq=678 receive_seq=678 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=15869466 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=401.727 buffer_time=2.998 print_stall=0 extruder: target=220 temp=220.0 pwm=0.503
  507. Stats 411.7: gcodein=1144 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000082 bytes_write=6674 bytes_read=49090 bytes_retransmit=19 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869460 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=401.727 buffer_time=2.003 print_stall=0 extruder: target=220 temp=220.3 pwm=0.422
  508. Stats 412.7: gcodein=1149 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000082 bytes_write=6707 bytes_read=49200 bytes_retransmit=19 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869455 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=401.727 buffer_time=1.010 print_stall=0 extruder: target=220 temp=219.9 pwm=0.551
  509. Stats 413.7: gcodein=1154 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000082 bytes_write=6754 bytes_read=49329 bytes_retransmit=19 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=49 srtt=0.006 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869449 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=401.727 buffer_time=0.017 print_stall=0 extruder: target=220 temp=220.4 pwm=0.392
  510. Stats 414.7: gcodein=1159 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000082 bytes_write=6774 bytes_read=49448 bytes_retransmit=19 bytes_invalid=0 send_seq=690 receive_seq=690 retransmit_seq=49 srtt=0.006 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869444 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=401.727 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.454
  511. Stats 415.7: gcodein=1164 mcu: mcu_awake=0.009 mcu_task_avg=0.000092 mcu_task_stddev=0.000082 bytes_write=6817 bytes_read=49558 bytes_retransmit=19 bytes_invalid=0 send_seq=693 receive_seq=693 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869438 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=401.727 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.486
  512. Stats 416.7: gcodein=1169 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000069 bytes_write=6850 bytes_read=49696 bytes_retransmit=19 bytes_invalid=0 send_seq=696 receive_seq=696 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869433 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=401.727 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.506
  513. Stats 417.7: gcodein=1174 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000069 bytes_write=6869 bytes_read=49815 bytes_retransmit=19 bytes_invalid=0 send_seq=698 receive_seq=698 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=8 stalled_bytes=0 freq=15869427 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=401.727 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.271
  514. Stats 418.7: gcodein=1190 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000069 bytes_write=6915 bytes_read=49930 bytes_retransmit=19 bytes_invalid=0 send_seq=702 receive_seq=702 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869422 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=401.727 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.510
  515. Stats 419.7: gcodein=1195 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000069 bytes_write=6960 bytes_read=50054 bytes_retransmit=19 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=49 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869416 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=409.936 buffer_time=2.267 print_stall=0 extruder: target=220 temp=219.9 pwm=0.455
  516. Stats 420.7: gcodein=1200 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000069 bytes_write=6992 bytes_read=50178 bytes_retransmit=19 bytes_invalid=0 send_seq=708 receive_seq=708 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=9 stalled_bytes=0 freq=15869411 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=1.274 print_stall=0 extruder: target=220 temp=219.8 pwm=0.516
  517. Stats 421.7: gcodein=1205 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7039 bytes_read=50307 bytes_retransmit=19 bytes_invalid=0 send_seq=712 receive_seq=712 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869405 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.281 print_stall=0 extruder: target=220 temp=219.8 pwm=0.505
  518. Stats 422.7: gcodein=1210 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7086 bytes_read=50422 bytes_retransmit=19 bytes_invalid=0 send_seq=716 receive_seq=716 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869399 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.539
  519. Stats 423.7: gcodein=1215 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7133 bytes_read=50565 bytes_retransmit=19 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=49 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15869394 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.531
  520. Stats 424.7: gcodein=1220 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7181 bytes_read=50680 bytes_retransmit=19 bytes_invalid=0 send_seq=724 receive_seq=724 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869388 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.386
  521. Stats 425.7: gcodein=1225 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7227 bytes_read=50795 bytes_retransmit=19 bytes_invalid=0 send_seq=728 receive_seq=728 retransmit_seq=49 srtt=0.008 rttvar=0.006 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869383 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.303
  522. Stats 426.7: gcodein=1230 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=7274 bytes_read=50938 bytes_retransmit=19 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869377 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.339
  523. Stats 427.7: gcodein=1235 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=7308 bytes_read=51062 bytes_retransmit=19 bytes_invalid=0 send_seq=735 receive_seq=735 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869372 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.448
  524. Stats 428.7: gcodein=1240 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=7342 bytes_read=51172 bytes_retransmit=19 bytes_invalid=0 send_seq=738 receive_seq=738 retransmit_seq=49 srtt=0.011 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869367 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.568
  525. Stats 429.7: gcodein=1245 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=7390 bytes_read=51301 bytes_retransmit=19 bytes_invalid=0 send_seq=742 receive_seq=742 retransmit_seq=49 srtt=0.008 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15869361 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.397
  526. Stats 430.7: gcodein=1250 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=7410 bytes_read=51420 bytes_retransmit=19 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869356 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.462
  527. Stats 431.7: gcodein=1255 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=7435 bytes_read=51539 bytes_retransmit=19 bytes_invalid=0 send_seq=747 receive_seq=746 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869351 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.360
  528. Stats 432.7: gcodein=1260 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=7455 bytes_read=51674 bytes_retransmit=19 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=49 srtt=0.008 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869340 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.496
  529. Stats 433.7: gcodein=1265 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=7475 bytes_read=51793 bytes_retransmit=19 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=49 srtt=0.007 rttvar=0.005 rto=0.027 ready_bytes=8 stalled_bytes=0 freq=15869335 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.311
  530. Stats 434.7: gcodein=1270 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=7508 bytes_read=51903 bytes_retransmit=19 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869330 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.391
  531. Stats 435.7: gcodein=1275 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000067 bytes_write=7514 bytes_read=52003 bytes_retransmit=19 bytes_invalid=0 send_seq=755 receive_seq=755 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869324 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.391
  532. Stats 436.7: gcodein=1280 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000066 bytes_write=7547 bytes_read=52155 bytes_retransmit=19 bytes_invalid=0 send_seq=758 receive_seq=758 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=9 stalled_bytes=0 freq=15869319 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.438
  533. Stats 437.7: gcodein=1285 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000066 bytes_write=7589 bytes_read=52265 bytes_retransmit=19 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15869314 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.467
  534. Stats 438.7: gcodein=1290 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000066 bytes_write=7637 bytes_read=52380 bytes_retransmit=19 bytes_invalid=0 send_seq=765 receive_seq=765 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869309 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.453
  535. Stats 439.7: gcodein=1295 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000066 bytes_write=7683 bytes_read=52509 bytes_retransmit=19 bytes_invalid=0 send_seq=769 receive_seq=769 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869305 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.468
  536. Stats 440.7: gcodein=1300 mcu: mcu_awake=0.008 mcu_task_avg=0.000081 mcu_task_stddev=0.000066 bytes_write=7703 bytes_read=52628 bytes_retransmit=19 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869299 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.396
  537. Stats 441.7: gcodein=1305 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7744 bytes_read=52752 bytes_retransmit=19 bytes_invalid=0 send_seq=774 receive_seq=774 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869294 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.370
  538. Stats 442.7: gcodein=1310 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7776 bytes_read=52876 bytes_retransmit=19 bytes_invalid=0 send_seq=777 receive_seq=777 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869289 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.340
  539. Stats 443.7: gcodein=1315 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7823 bytes_read=53000 bytes_retransmit=19 bytes_invalid=0 send_seq=781 receive_seq=780 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869284 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.485
  540. Stats 444.7: gcodein=1320 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7871 bytes_read=53120 bytes_retransmit=19 bytes_invalid=0 send_seq=785 receive_seq=785 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869278 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.529
  541. Stats 445.7: gcodein=1325 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7899 bytes_read=53239 bytes_retransmit=19 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15869273 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.453
  542. Stats 446.7: gcodein=1330 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000068 bytes_write=7932 bytes_read=53363 bytes_retransmit=19 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15869267 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.408
  543. Stats 447.7: gcodein=1335 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=7980 bytes_read=53492 bytes_retransmit=19 bytes_invalid=0 send_seq=794 receive_seq=794 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869262 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.422
  544. Stats 448.7: gcodein=1340 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=8000 bytes_read=53611 bytes_retransmit=19 bytes_invalid=0 send_seq=796 receive_seq=796 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869257 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.476
  545. Stats 449.7: gcodein=1345 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=8043 bytes_read=53735 bytes_retransmit=19 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=49 srtt=0.007 rttvar=0.005 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15869252 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.578
  546. Stats 450.7: gcodein=1350 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=8077 bytes_read=53845 bytes_retransmit=19 bytes_invalid=0 send_seq=802 receive_seq=802 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869247 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=409.936 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.502
  547. Stats 451.7: gcodein=1367 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=8218 bytes_read=53965 bytes_retransmit=19 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869243 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=439.692 buffer_time=0.248 print_stall=0 extruder: target=220 temp=220.1 pwm=0.336
  548. Stats 452.7: gcodein=1372 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000081 bytes_write=8252 bytes_read=54103 bytes_retransmit=19 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15869237 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.497
  549. Stats 453.7: gcodein=1377 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000081 bytes_write=8295 bytes_read=54227 bytes_retransmit=19 bytes_invalid=0 send_seq=813 receive_seq=813 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869232 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.425
  550. Stats 454.7: gcodein=1382 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000081 bytes_write=8301 bytes_read=54327 bytes_retransmit=19 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869227 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.425
  551. Stats 455.7: gcodein=1387 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000081 bytes_write=8335 bytes_read=54451 bytes_retransmit=19 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869222 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.450
  552. Stats 456.7: gcodein=1392 mcu: mcu_awake=0.009 mcu_task_avg=0.000091 mcu_task_stddev=0.000081 bytes_write=8341 bytes_read=54565 bytes_retransmit=19 bytes_invalid=0 send_seq=818 receive_seq=818 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869216 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.450
  553. Stats 457.7: gcodein=1397 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=8361 bytes_read=54684 bytes_retransmit=19 bytes_invalid=0 send_seq=820 receive_seq=820 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869211 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.383
  554. Stats 458.7: gcodein=1402 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=8367 bytes_read=54798 bytes_retransmit=19 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869206 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.383
  555. Stats 459.7: gcodein=1407 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=8401 bytes_read=54922 bytes_retransmit=19 bytes_invalid=0 send_seq=824 receive_seq=824 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15869201 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=439.692 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.389
  556. Stats 460.7: gcodein=1426 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=8540 bytes_read=55037 bytes_retransmit=19 bytes_invalid=0 send_seq=828 receive_seq=828 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869197 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=450.718 buffer_time=2.336 print_stall=0 extruder: target=220 temp=219.8 pwm=0.477
  557. Stats 461.7: gcodein=1431 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000067 bytes_write=8586 bytes_read=55166 bytes_retransmit=19 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869192 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=450.718 buffer_time=1.343 print_stall=0 extruder: target=220 temp=220.3 pwm=0.333
  558. Stats 462.7: gcodein=1436 mcu: mcu_awake=0.009 mcu_task_avg=0.000094 mcu_task_stddev=0.000087 bytes_write=8619 bytes_read=55305 bytes_retransmit=19 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869187 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=450.718 buffer_time=0.350 print_stall=0 extruder: target=220 temp=220.2 pwm=0.403
  559. Stats 463.8: gcodein=1441 mcu: mcu_awake=0.009 mcu_task_avg=0.000094 mcu_task_stddev=0.000087 bytes_write=8665 bytes_read=55420 bytes_retransmit=19 bytes_invalid=0 send_seq=839 receive_seq=839 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869181 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=450.718 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.349
  560. Stats 464.8: gcodein=1446 mcu: mcu_awake=0.009 mcu_task_avg=0.000094 mcu_task_stddev=0.000087 bytes_write=8697 bytes_read=55530 bytes_retransmit=19 bytes_invalid=0 send_seq=842 receive_seq=842 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869176 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=450.718 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.345
  561. Stats 465.8: gcodein=1451 mcu: mcu_awake=0.009 mcu_task_avg=0.000094 mcu_task_stddev=0.000087 bytes_write=8744 bytes_read=55659 bytes_retransmit=19 bytes_invalid=0 send_seq=846 receive_seq=846 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869171 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=450.718 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.454
  562. Stats 466.8: gcodein=1456 mcu: mcu_awake=0.009 mcu_task_avg=0.000094 mcu_task_stddev=0.000087 bytes_write=8776 bytes_read=55783 bytes_retransmit=19 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869166 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=450.718 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.290
  563. Stats 467.8: gcodein=1461 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=8824 bytes_read=55912 bytes_retransmit=19 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=49 srtt=0.011 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869160 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=450.718 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.408
  564. Stats 468.8: gcodein=1477 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=8869 bytes_read=56036 bytes_retransmit=19 bytes_invalid=0 send_seq=856 receive_seq=856 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869155 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=459.451 buffer_time=3.124 print_stall=0 extruder: target=220 temp=219.8 pwm=0.550
  565. Stats 469.8: gcodein=1482 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=8916 bytes_read=56165 bytes_retransmit=19 bytes_invalid=0 send_seq=860 receive_seq=860 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869150 heater_bed: target=0 temp=28.6 pwm=0.000 print_time=459.451 buffer_time=2.131 print_stall=0 extruder: target=220 temp=219.9 pwm=0.428
  566. Stats 470.8: gcodein=1487 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=8963 bytes_read=56280 bytes_retransmit=19 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869145 heater_bed: target=0 temp=28.6 pwm=0.000 print_time=459.451 buffer_time=1.137 print_stall=0 extruder: target=220 temp=220.4 pwm=0.265
  567. Stats 471.8: gcodein=1492 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=9010 bytes_read=56409 bytes_retransmit=19 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869140 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=459.451 buffer_time=0.144 print_stall=0 extruder: target=220 temp=220.0 pwm=0.371
  568. Stats 472.8: gcodein=1497 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=9051 bytes_read=56547 bytes_retransmit=19 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869135 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.582
  569. Stats 473.8: gcodein=1502 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=9098 bytes_read=56662 bytes_retransmit=19 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869130 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.414
  570. Stats 474.8: gcodein=1507 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=9131 bytes_read=56786 bytes_retransmit=19 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869125 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.0 pwm=0.697
  571. Stats 475.8: gcodein=1512 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=9165 bytes_read=56910 bytes_retransmit=19 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.033 ready_bytes=8 stalled_bytes=0 freq=15869120 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.356
  572. Stats 476.8: gcodein=1517 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=9212 bytes_read=57025 bytes_retransmit=19 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869116 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.3 pwm=0.546
  573. Stats 477.8: gcodein=1522 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000066 bytes_write=9259 bytes_read=57168 bytes_retransmit=19 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869111 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.7 pwm=0.743
  574. Stats 478.8: gcodein=1527 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000066 bytes_write=9305 bytes_read=57297 bytes_retransmit=19 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15869106 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.2 pwm=0.595
  575. Stats 479.8: gcodein=1532 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000066 bytes_write=9366 bytes_read=57417 bytes_retransmit=19 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=0 freq=15869101 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.3 pwm=0.549
  576. Stats 480.8: gcodein=1537 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000066 bytes_write=9399 bytes_read=57527 bytes_retransmit=19 bytes_invalid=0 send_seq=901 receive_seq=901 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869096 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.508
  577. Stats 481.8: gcodein=1542 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000066 bytes_write=9433 bytes_read=57651 bytes_retransmit=19 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869092 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.386
  578. Stats 482.8: gcodein=1547 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=9494 bytes_read=57799 bytes_retransmit=19 bytes_invalid=0 send_seq=909 receive_seq=909 retransmit_seq=49 srtt=0.011 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869087 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.450
  579. Stats 483.8: gcodein=1552 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=9539 bytes_read=57914 bytes_retransmit=19 bytes_invalid=0 send_seq=913 receive_seq=913 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869082 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.244
  580. Stats 484.8: gcodein=1557 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=9581 bytes_read=58038 bytes_retransmit=19 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869078 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.000
  581. Stats 485.8: gcodein=1562 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=9641 bytes_read=58172 bytes_retransmit=19 bytes_invalid=0 send_seq=921 receive_seq=921 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869073 heater_bed: target=0 temp=28.2 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.216
  582. Stats 486.8: gcodein=1567 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=9689 bytes_read=58287 bytes_retransmit=19 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869068 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=459.451 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.9 pwm=0.733
  583. Stats 487.8: gcodein=1585 mcu: mcu_awake=0.010 mcu_task_avg=0.000092 mcu_task_stddev=0.000078 bytes_write=9829 bytes_read=58435 bytes_retransmit=19 bytes_invalid=0 send_seq=930 receive_seq=930 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15869064 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=475.831 buffer_time=0.633 print_stall=0 extruder: target=220 temp=219.8 pwm=0.506
  584. Stats 488.8: gcodein=1590 mcu: mcu_awake=0.010 mcu_task_avg=0.000092 mcu_task_stddev=0.000078 bytes_write=9883 bytes_read=58559 bytes_retransmit=19 bytes_invalid=0 send_seq=934 receive_seq=933 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869060 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.363
  585. Stats 489.8: gcodein=1595 mcu: mcu_awake=0.010 mcu_task_avg=0.000092 mcu_task_stddev=0.000078 bytes_write=9929 bytes_read=58679 bytes_retransmit=19 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=49 srtt=0.009 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869055 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.000
  586. Stats 490.8: gcodein=1600 mcu: mcu_awake=0.010 mcu_task_avg=0.000092 mcu_task_stddev=0.000078 bytes_write=9976 bytes_read=58808 bytes_retransmit=19 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869051 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.000
  587. Stats 491.8: gcodein=1605 mcu: mcu_awake=0.010 mcu_task_avg=0.000092 mcu_task_stddev=0.000078 bytes_write=10022 bytes_read=58937 bytes_retransmit=19 bytes_invalid=0 send_seq=946 receive_seq=946 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=9 stalled_bytes=0 freq=15869046 heater_bed: target=0 temp=28.5 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.802
  588. Stats 492.8: gcodein=1610 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=10071 bytes_read=59077 bytes_retransmit=19 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869037 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.396
  589. Stats 493.8: gcodein=1615 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=10103 bytes_read=59187 bytes_retransmit=19 bytes_invalid=0 send_seq=953 receive_seq=953 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869033 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.213
  590. Stats 494.8: gcodein=1620 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=10151 bytes_read=59330 bytes_retransmit=19 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=8 stalled_bytes=0 freq=15869029 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.270
  591. Stats 495.8: gcodein=1625 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=10205 bytes_read=59445 bytes_retransmit=19 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.034 ready_bytes=0 stalled_bytes=0 freq=15869024 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.211
  592. Stats 496.8: gcodein=1630 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=10237 bytes_read=59555 bytes_retransmit=19 bytes_invalid=0 send_seq=964 receive_seq=964 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15869020 heater_bed: target=0 temp=28.6 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.233
  593. Stats 497.8: gcodein=1635 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=10269 bytes_read=59679 bytes_retransmit=19 bytes_invalid=0 send_seq=967 receive_seq=967 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15869016 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.356
  594. Stats 498.8: gcodein=1654 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=10328 bytes_read=59827 bytes_retransmit=19 bytes_invalid=0 send_seq=972 receive_seq=972 retransmit_seq=49 srtt=0.012 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15869012 heater_bed: target=0 temp=28.6 pwm=0.000 print_time=475.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.695
  595. Stats 499.8: gcodein=1659 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=10490 bytes_read=59947 bytes_retransmit=19 bytes_invalid=0 send_seq=977 receive_seq=977 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869007 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=488.459 buffer_time=1.347 print_stall=0 extruder: target=220 temp=220.1 pwm=0.498
  596. Stats 500.8: gcodein=1664 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=10510 bytes_read=60066 bytes_retransmit=19 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15869003 heater_bed: target=0 temp=28.6 pwm=0.000 print_time=488.459 buffer_time=0.354 print_stall=0 extruder: target=220 temp=219.7 pwm=0.565
  597. Stats 501.8: gcodein=1669 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=10543 bytes_read=60185 bytes_retransmit=19 bytes_invalid=0 send_seq=982 receive_seq=981 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868998 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=488.459 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.693
  598. Stats 502.8: gcodein=1674 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=10589 bytes_read=60305 bytes_retransmit=19 bytes_invalid=0 send_seq=986 receive_seq=986 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868994 heater_bed: target=0 temp=28.5 pwm=0.000 print_time=488.459 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.105
  599. Stats 503.8: gcodein=1679 mcu: mcu_awake=0.010 mcu_task_avg=0.000093 mcu_task_stddev=0.000086 bytes_write=10622 bytes_read=60444 bytes_retransmit=19 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868989 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=488.459 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.000
  600. Stats 504.8: gcodein=1684 mcu: mcu_awake=0.010 mcu_task_avg=0.000093 mcu_task_stddev=0.000086 bytes_write=10668 bytes_read=60573 bytes_retransmit=19 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868985 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=488.459 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.2 pwm=0.782
  601. Stats 505.8: gcodein=1689 mcu: mcu_awake=0.010 mcu_task_avg=0.000093 mcu_task_stddev=0.000086 bytes_write=10729 bytes_read=60693 bytes_retransmit=19 bytes_invalid=0 send_seq=998 receive_seq=998 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868981 heater_bed: target=0 temp=29.1 pwm=0.000 print_time=488.459 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.566
  602. Stats 506.8: gcodein=1705 mcu: mcu_awake=0.010 mcu_task_avg=0.000093 mcu_task_stddev=0.000086 bytes_write=10800 bytes_read=60822 bytes_retransmit=19 bytes_invalid=0 send_seq=1003 receive_seq=1002 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.034 ready_bytes=0 stalled_bytes=0 freq=15868977 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=500.305 buffer_time=6.241 print_stall=0 extruder: target=220 temp=219.3 pwm=0.720
  603. Stats 507.8: gcodein=1710 mcu: mcu_awake=0.010 mcu_task_avg=0.000093 mcu_task_stddev=0.000086 bytes_write=10847 bytes_read=60956 bytes_retransmit=19 bytes_invalid=0 send_seq=1007 receive_seq=1007 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=9 stalled_bytes=0 freq=15868973 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=5.248 print_stall=0 extruder: target=220 temp=218.7 pwm=0.828
  604. Stats 508.8: gcodein=1715 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=10894 bytes_read=61085 bytes_retransmit=19 bytes_invalid=0 send_seq=1011 receive_seq=1011 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868968 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=500.305 buffer_time=4.255 print_stall=0 extruder: target=220 temp=220.2 pwm=0.408
  605. Stats 509.8: gcodein=1720 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=10942 bytes_read=61200 bytes_retransmit=19 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868964 heater_bed: target=0 temp=28.7 pwm=0.000 print_time=500.305 buffer_time=3.261 print_stall=0 extruder: target=220 temp=219.5 pwm=0.589
  606. Stats 510.8: gcodein=1725 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=10984 bytes_read=61324 bytes_retransmit=19 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868960 heater_bed: target=0 temp=28.2 pwm=0.000 print_time=500.305 buffer_time=2.268 print_stall=0 extruder: target=220 temp=221.3 pwm=0.000
  607. Stats 511.8: gcodein=1730 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=11044 bytes_read=61458 bytes_retransmit=19 bytes_invalid=0 send_seq=1023 receive_seq=1023 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868956 heater_bed: target=0 temp=28.0 pwm=0.000 print_time=500.305 buffer_time=1.275 print_stall=0 extruder: target=220 temp=220.9 pwm=0.065
  608. Stats 512.8: gcodein=1735 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000066 bytes_write=11091 bytes_read=61573 bytes_retransmit=19 bytes_invalid=0 send_seq=1027 receive_seq=1027 retransmit_seq=49 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868952 heater_bed: target=0 temp=28.4 pwm=0.000 print_time=500.305 buffer_time=0.282 print_stall=0 extruder: target=220 temp=220.4 pwm=0.224
  609. Stats 513.8: gcodein=1740 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11139 bytes_read=61716 bytes_retransmit=19 bytes_invalid=0 send_seq=1031 receive_seq=1031 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868947 heater_bed: target=0 temp=29.2 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.8 pwm=0.719
  610. Stats 514.8: gcodein=1745 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11194 bytes_read=61845 bytes_retransmit=19 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=49 srtt=0.010 rttvar=0.006 rto=0.034 ready_bytes=0 stalled_bytes=0 freq=15868944 heater_bed: target=0 temp=28.4 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.347
  611. Stats 515.8: gcodein=1750 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11240 bytes_read=61960 bytes_retransmit=19 bytes_invalid=0 send_seq=1039 receive_seq=1039 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868939 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.7 pwm=0.821
  612. Stats 516.8: gcodein=1755 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11288 bytes_read=62089 bytes_retransmit=19 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868935 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.8 pwm=0.726
  613. Stats 517.8: gcodein=1760 mcu: mcu_awake=0.009 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11321 bytes_read=62213 bytes_retransmit=19 bytes_invalid=0 send_seq=1046 receive_seq=1046 retransmit_seq=49 srtt=0.011 rttvar=0.004 rto=0.026 ready_bytes=9 stalled_bytes=0 freq=15868931 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.515
  614. Stats 518.8: gcodein=1765 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=11375 bytes_read=62342 bytes_retransmit=19 bytes_invalid=0 send_seq=1050 receive_seq=1050 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868927 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.2 pwm=0.000
  615. Stats 519.8: gcodein=1770 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=11423 bytes_read=62471 bytes_retransmit=19 bytes_invalid=0 send_seq=1054 receive_seq=1054 retransmit_seq=49 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868923 heater_bed: target=0 temp=28.4 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.671
  616. Stats 520.8: gcodein=1775 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=11457 bytes_read=62595 bytes_retransmit=19 bytes_invalid=0 send_seq=1057 receive_seq=1057 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868919 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.2 pwm=0.621
  617. Stats 521.8: gcodein=1780 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=11490 bytes_read=62705 bytes_retransmit=19 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868916 heater_bed: target=0 temp=28.0 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.651
  618. Stats 522.8: gcodein=1785 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=11532 bytes_read=62829 bytes_retransmit=19 bytes_invalid=0 send_seq=1063 receive_seq=1063 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.034 ready_bytes=0 stalled_bytes=0 freq=15868912 heater_bed: target=0 temp=28.5 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.3 pwm=0.691
  619. Stats 523.8: gcodein=1790 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000067 bytes_write=11564 bytes_read=62953 bytes_retransmit=19 bytes_invalid=0 send_seq=1066 receive_seq=1066 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868908 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.2 pwm=0.000
  620. Stats 524.8: gcodein=1795 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000067 bytes_write=11597 bytes_read=63077 bytes_retransmit=19 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868904 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.735
  621. Stats 525.8: gcodein=1800 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000067 bytes_write=11630 bytes_read=63187 bytes_retransmit=19 bytes_invalid=0 send_seq=1072 receive_seq=1072 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868901 heater_bed: target=0 temp=28.0 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.719
  622. Stats 526.8: gcodein=1805 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000067 bytes_write=11657 bytes_read=63306 bytes_retransmit=19 bytes_invalid=0 send_seq=1074 receive_seq=1074 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868897 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.306
  623. Stats 527.8: gcodein=1810 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000067 bytes_write=11704 bytes_read=63435 bytes_retransmit=19 bytes_invalid=0 send_seq=1078 receive_seq=1078 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868894 heater_bed: target=0 temp=28.9 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.781
  624. Stats 528.8: gcodein=1815 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11736 bytes_read=63559 bytes_retransmit=19 bytes_invalid=0 send_seq=1081 receive_seq=1081 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868890 heater_bed: target=0 temp=29.0 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.363
  625. Stats 529.8: gcodein=1820 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11770 bytes_read=63683 bytes_retransmit=19 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868887 heater_bed: target=0 temp=28.5 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.578
  626. Stats 530.8: gcodein=1825 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11817 bytes_read=63812 bytes_retransmit=19 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868883 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.746
  627. Stats 531.8: gcodein=1830 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11851 bytes_read=63922 bytes_retransmit=19 bytes_invalid=0 send_seq=1091 receive_seq=1091 retransmit_seq=49 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868879 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.1 pwm=0.754
  628. Stats 532.8: gcodein=1835 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000065 bytes_write=11884 bytes_read=64046 bytes_retransmit=19 bytes_invalid=0 send_seq=1094 receive_seq=1094 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868875 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.1 pwm=0.721
  629. Stats 533.8: gcodein=1840 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000064 bytes_write=11918 bytes_read=64184 bytes_retransmit=19 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=49 srtt=0.011 rttvar=0.005 rto=0.031 ready_bytes=8 stalled_bytes=0 freq=15868872 heater_bed: target=0 temp=28.8 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.6 pwm=0.000
  630. Stats 534.8: gcodein=1845 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000064 bytes_write=11964 bytes_read=64299 bytes_retransmit=19 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868868 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.120
  631. Stats 535.8: gcodein=1850 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000064 bytes_write=12011 bytes_read=64428 bytes_retransmit=19 bytes_invalid=0 send_seq=1105 receive_seq=1105 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868864 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.734
  632. Stats 536.8: gcodein=1855 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000064 bytes_write=12044 bytes_read=64552 bytes_retransmit=19 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868861 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.667
  633. Stats 537.8: gcodein=1860 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000064 bytes_write=12091 bytes_read=64667 bytes_retransmit=19 bytes_invalid=0 send_seq=1112 receive_seq=1112 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868858 heater_bed: target=0 temp=28.0 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.730
  634. Stats 538.9: gcodein=1865 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=12138 bytes_read=64796 bytes_retransmit=19 bytes_invalid=0 send_seq=1116 receive_seq=1116 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868854 heater_bed: target=0 temp=28.2 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.662
  635. Stats 539.9: gcodein=1870 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=12171 bytes_read=64920 bytes_retransmit=19 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868851 heater_bed: target=0 temp=28.1 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.391
  636. Stats 540.9: gcodein=1875 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=12190 bytes_read=65039 bytes_retransmit=19 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868847 heater_bed: target=0 temp=29.3 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.4 pwm=0.000
  637. Stats 541.9: gcodein=1880 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=12237 bytes_read=65154 bytes_retransmit=19 bytes_invalid=0 send_seq=1125 receive_seq=1125 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868844 heater_bed: target=0 temp=28.2 pwm=0.000 print_time=500.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.4 pwm=0.000
  638. Stats 542.9: gcodein=1894 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=12284 bytes_read=65283 bytes_retransmit=19 bytes_invalid=0 send_seq=1129 receive_seq=1129 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868841 heater_bed: target=45 temp=28.2 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.135
  639. Heater heater_bed approaching new target of 45.000
  640. Stats 543.9: gcodein=1899 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000063 bytes_write=12332 bytes_read=65426 bytes_retransmit=19 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868838 heater_bed: target=45 temp=29.3 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.905
  641. Stats 544.9: gcodein=1904 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000063 bytes_write=12378 bytes_read=65541 bytes_retransmit=19 bytes_invalid=0 send_seq=1137 receive_seq=1137 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868834 heater_bed: target=45 temp=29.1 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.6 pwm=0.000
  642. Stats 545.9: gcodein=1909 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000063 bytes_write=12398 bytes_read=65657 bytes_retransmit=19 bytes_invalid=0 send_seq=1139 receive_seq=1139 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868831 heater_bed: target=45 temp=29.4 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.833
  643. Stats 546.9: gcodein=1914 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000063 bytes_write=12459 bytes_read=65783 bytes_retransmit=19 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868828 heater_bed: target=45 temp=28.5 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.203
  644. Stats 547.9: gcodein=1919 mcu: mcu_awake=0.008 mcu_task_avg=0.000083 mcu_task_stddev=0.000063 bytes_write=12520 bytes_read=65896 bytes_retransmit=19 bytes_invalid=0 send_seq=1149 receive_seq=1149 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868824 heater_bed: target=45 temp=29.2 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.576
  645. Stats 548.9: gcodein=1924 mcu: mcu_awake=0.009 mcu_task_avg=0.000082 mcu_task_stddev=0.000061 bytes_write=12553 bytes_read=66026 bytes_retransmit=19 bytes_invalid=0 send_seq=1152 receive_seq=1152 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868821 heater_bed: target=45 temp=29.9 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.8 pwm=0.859
  646. Stats 549.9: gcodein=1929 mcu: mcu_awake=0.009 mcu_task_avg=0.000082 mcu_task_stddev=0.000061 bytes_write=12595 bytes_read=66141 bytes_retransmit=19 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=9 stalled_bytes=0 freq=15868818 heater_bed: target=45 temp=30.0 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.0 pwm=0.750
  647. Stats 550.9: gcodein=1934 mcu: mcu_awake=0.009 mcu_task_avg=0.000082 mcu_task_stddev=0.000061 bytes_write=12656 bytes_read=66254 bytes_retransmit=19 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=30.3 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.332
  648. Stats 551.9: gcodein=1939 mcu: mcu_awake=0.009 mcu_task_avg=0.000082 mcu_task_stddev=0.000061 bytes_write=12676 bytes_read=66352 bytes_retransmit=19 bytes_invalid=0 send_seq=1162 receive_seq=1162 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868811 heater_bed: target=45 temp=30.5 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.599
  649. Stats 552.9: gcodein=1944 mcu: mcu_awake=0.009 mcu_task_avg=0.000082 mcu_task_stddev=0.000061 bytes_write=12710 bytes_read=66481 bytes_retransmit=19 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868808 heater_bed: target=45 temp=30.6 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.492
  650. Stats 553.9: gcodein=1949 mcu: mcu_awake=0.009 mcu_task_avg=0.000082 mcu_task_stddev=0.000061 bytes_write=12750 bytes_read=66584 bytes_retransmit=19 bytes_invalid=0 send_seq=1169 receive_seq=1168 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868805 heater_bed: target=45 temp=31.0 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.454
  651. Stats 554.9: gcodein=1954 mcu: mcu_awake=0.008 mcu_task_avg=0.000079 mcu_task_stddev=0.000060 bytes_write=12797 bytes_read=66721 bytes_retransmit=19 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868798 heater_bed: target=45 temp=31.4 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.498
  652. Stats 555.9: gcodein=1959 mcu: mcu_awake=0.008 mcu_task_avg=0.000079 mcu_task_stddev=0.000060 bytes_write=12858 bytes_read=66847 bytes_retransmit=19 bytes_invalid=0 send_seq=1178 receive_seq=1178 retransmit_seq=49 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868795 heater_bed: target=45 temp=31.7 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.528
  653. Stats 556.9: gcodein=1964 mcu: mcu_awake=0.008 mcu_task_avg=0.000079 mcu_task_stddev=0.000060 bytes_write=12915 bytes_read=66968 bytes_retransmit=19 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=49 srtt=0.012 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868792 heater_bed: target=45 temp=31.9 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.390
  654. Stats 557.9: gcodein=1969 mcu: mcu_awake=0.008 mcu_task_avg=0.000079 mcu_task_stddev=0.000060 bytes_write=12949 bytes_read=67071 bytes_retransmit=19 bytes_invalid=0 send_seq=1185 receive_seq=1185 retransmit_seq=49 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868790 heater_bed: target=45 temp=32.3 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.423
  655. Stats 558.9: gcodein=1974 mcu: mcu_awake=0.008 mcu_task_avg=0.000079 mcu_task_stddev=0.000060 bytes_write=12982 bytes_read=67187 bytes_retransmit=19 bytes_invalid=0 send_seq=1188 receive_seq=1188 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868786 heater_bed: target=45 temp=32.6 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.436
  656. Stats 559.9: gcodein=1979 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000058 bytes_write=13016 bytes_read=67312 bytes_retransmit=19 bytes_invalid=0 send_seq=1191 receive_seq=1190 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868783 heater_bed: target=45 temp=32.8 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.496
  657. Stats 560.9: gcodein=1984 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000058 bytes_write=13063 bytes_read=67425 bytes_retransmit=19 bytes_invalid=0 send_seq=1195 receive_seq=1195 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868779 heater_bed: target=45 temp=33.0 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.307
  658. Stats 561.9: gcodein=1989 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000058 bytes_write=13138 bytes_read=67556 bytes_retransmit=19 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868776 heater_bed: target=45 temp=33.8 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.357
  659. Stats 562.9: gcodein=1994 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000058 bytes_write=13171 bytes_read=67677 bytes_retransmit=19 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868773 heater_bed: target=45 temp=33.8 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.418
  660. Stats 563.9: gcodein=1999 mcu: mcu_awake=0.008 mcu_task_avg=0.000080 mcu_task_stddev=0.000058 bytes_write=13232 bytes_read=67797 bytes_retransmit=19 bytes_invalid=0 send_seq=1209 receive_seq=1209 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868769 heater_bed: target=45 temp=34.1 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.310
  661. Stats 564.9: gcodein=2004 mcu: mcu_awake=0.009 mcu_task_avg=0.000083 mcu_task_stddev=0.000060 bytes_write=13307 bytes_read=67950 bytes_retransmit=19 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=49 srtt=0.012 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868766 heater_bed: target=45 temp=35.0 pwm=0.301 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.296
  662. Stats 565.9: gcodein=2009 mcu: mcu_awake=0.009 mcu_task_avg=0.000083 mcu_task_stddev=0.000060 bytes_write=13409 bytes_read=68099 bytes_retransmit=19 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=49 srtt=0.007 rttvar=0.006 rto=0.030 ready_bytes=9 stalled_bytes=0 freq=15868763 heater_bed: target=45 temp=35.2 pwm=0.776 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.403
  663. Stats 566.9: gcodein=2014 mcu: mcu_awake=0.009 mcu_task_avg=0.000083 mcu_task_stddev=0.000060 bytes_write=13485 bytes_read=68224 bytes_retransmit=19 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868760 heater_bed: target=45 temp=35.2 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.556
  664. Stats 567.9: gcodein=2019 mcu: mcu_awake=0.009 mcu_task_avg=0.000083 mcu_task_stddev=0.000060 bytes_write=13546 bytes_read=68344 bytes_retransmit=19 bytes_invalid=0 send_seq=1234 receive_seq=1234 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868756 heater_bed: target=45 temp=35.7 pwm=0.998 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.386
  665. Stats 568.9: gcodein=2024 mcu: mcu_awake=0.009 mcu_task_avg=0.000083 mcu_task_stddev=0.000060 bytes_write=13594 bytes_read=68473 bytes_retransmit=19 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868753 heater_bed: target=45 temp=36.3 pwm=0.414 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.386
  666. Stats 569.9: gcodein=2029 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000064 bytes_write=13668 bytes_read=68626 bytes_retransmit=19 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868750 heater_bed: target=45 temp=36.4 pwm=0.955 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.419
  667. Stats 570.9: gcodein=2034 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000064 bytes_write=13730 bytes_read=68746 bytes_retransmit=19 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868746 heater_bed: target=45 temp=36.9 pwm=0.481 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.441
  668. Stats 571.9: gcodein=2039 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000064 bytes_write=13764 bytes_read=68870 bytes_retransmit=19 bytes_invalid=0 send_seq=1252 receive_seq=1252 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868743 heater_bed: target=45 temp=37.2 pwm=0.440 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.441
  669. Stats 572.9: gcodein=2044 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000064 bytes_write=13854 bytes_read=69014 bytes_retransmit=19 bytes_invalid=0 send_seq=1259 receive_seq=1259 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868739 heater_bed: target=45 temp=37.6 pwm=0.391 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.547
  670. Stats 573.9: gcodein=2049 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000064 bytes_write=13929 bytes_read=69139 bytes_retransmit=19 bytes_invalid=0 send_seq=1265 receive_seq=1265 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868736 heater_bed: target=45 temp=37.6 pwm=0.842 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.405
  671. Stats 574.9: gcodein=2054 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14019 bytes_read=69297 bytes_retransmit=19 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=49 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868733 heater_bed: target=45 temp=37.8 pwm=1.000 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.525
  672. Stats 575.9: gcodein=2059 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14106 bytes_read=69441 bytes_retransmit=19 bytes_invalid=0 send_seq=1279 receive_seq=1279 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868729 heater_bed: target=45 temp=38.4 pwm=0.328 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.504
  673. Stats 576.9: gcodein=2064 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14209 bytes_read=69576 bytes_retransmit=19 bytes_invalid=0 send_seq=1287 receive_seq=1287 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868725 heater_bed: target=45 temp=38.5 pwm=0.638 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.275
  674. Stats 577.9: gcodein=2069 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14271 bytes_read=69710 bytes_retransmit=19 bytes_invalid=0 send_seq=1292 receive_seq=1292 retransmit_seq=49 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=9 stalled_bytes=0 freq=15868722 heater_bed: target=45 temp=38.8 pwm=0.557 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.485
  675. Stats 578.9: gcodein=2074 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14317 bytes_read=69839 bytes_retransmit=19 bytes_invalid=0 send_seq=1296 receive_seq=1296 retransmit_seq=49 srtt=0.006 rttvar=0.004 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868719 heater_bed: target=45 temp=39.2 pwm=0.363 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.346
  676. Stats 579.9: gcodein=2079 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14378 bytes_read=69973 bytes_retransmit=19 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868715 heater_bed: target=45 temp=39.2 pwm=0.724 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.481
  677. Stats 580.9: gcodein=2084 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14454 bytes_read=70098 bytes_retransmit=19 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=49 srtt=0.009 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868711 heater_bed: target=45 temp=39.5 pwm=0.529 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.514
  678. Stats 581.9: gcodein=2089 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14554 bytes_read=70247 bytes_retransmit=19 bytes_invalid=0 send_seq=1315 receive_seq=1315 retransmit_seq=49 srtt=0.007 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868707 heater_bed: target=45 temp=39.8 pwm=0.422 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.290
  679. Stats 582.9: gcodein=2094 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14650 bytes_read=70391 bytes_retransmit=19 bytes_invalid=0 send_seq=1322 receive_seq=1322 retransmit_seq=49 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868704 heater_bed: target=45 temp=40.2 pwm=0.048 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.415
  680. Stats 583.9: gcodein=2099 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000066 bytes_write=14718 bytes_read=70511 bytes_retransmit=19 bytes_invalid=0 send_seq=1327 receive_seq=1327 retransmit_seq=49 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868701 heater_bed: target=45 temp=40.3 pwm=0.329 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.292
  681. Stats 584.9: gcodein=2104 mcu: mcu_awake=0.011 mcu_task_avg=0.000094 mcu_task_stddev=0.000067 bytes_write=14806 bytes_read=70670 bytes_retransmit=19 bytes_invalid=0 send_seq=1334 receive_seq=1334 retransmit_seq=49 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868697 heater_bed: target=45 temp=40.6 pwm=0.455 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.365
  682. Heater heater_bed within range of 45.000
  683. Stats 585.9: gcodein=2109 mcu: mcu_awake=0.011 mcu_task_avg=0.000094 mcu_task_stddev=0.000067 bytes_write=14853 bytes_read=70799 bytes_retransmit=19 bytes_invalid=0 send_seq=1338 receive_seq=1338 retransmit_seq=49 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868693 heater_bed: target=45 temp=40.6 pwm=0.706 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.356
  684. Stats 586.9: gcodein=2114 mcu: mcu_awake=0.011 mcu_task_avg=0.000094 mcu_task_stddev=0.000067 bytes_write=14915 bytes_read=70919 bytes_retransmit=19 bytes_invalid=0 send_seq=1343 receive_seq=1343 retransmit_seq=49 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868689 heater_bed: target=45 temp=40.8 pwm=0.707 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.509
  685. Stats 587.9: gcodein=2119 mcu: mcu_awake=0.011 mcu_task_avg=0.000094 mcu_task_stddev=0.000067 bytes_write=15013 bytes_read=71058 bytes_retransmit=19 bytes_invalid=0 send_seq=1350 receive_seq=1349 retransmit_seq=49 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868686 heater_bed: target=45 temp=41.2 pwm=0.352 print_time=529.122 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.398
  686. Stats 588.9: gcodein=2127 mcu: mcu_awake=0.011 mcu_task_avg=0.000094 mcu_task_stddev=0.000067 bytes_write=15115 bytes_read=71174 bytes_retransmit=79 bytes_invalid=16 send_seq=1357 receive_seq=1356 retransmit_seq=1357 srtt=0.010 rttvar=0.005 rto=0.118 ready_bytes=0 stalled_bytes=0 freq=15868682 heater_bed: target=0 temp=41.1 pwm=0.821 print_time=576.205 buffer_time=0.708 print_stall=0 extruder: target=0 temp=220.5 pwm=0.266
  687. Restarting printer
  688. Start printer at Sat May 11 23:22:48 2019 (1557613368.1 590.9)
  689. ===== Config file =====
  690. [stepper_x]
  691. step_pin = ar54
  692. dir_pin = ar55
  693. enable_pin = !ar38
  694. step_distance = .0125
  695. endstop_pin = ^!ar2
  696. position_endstop = 0
  697. position_max = 220
  698. homing_speed = 50
  699.  
  700. [stepper_y]
  701. step_pin = ar60
  702. dir_pin = !ar61
  703. enable_pin = !ar56
  704. step_distance = .0125
  705. endstop_pin = ^!ar15
  706. position_endstop = 200
  707. position_max = 200
  708. homing_speed = 50
  709.  
  710. [stepper_z]
  711. step_pin = ar46
  712. dir_pin = ar48
  713. enable_pin = !ar62
  714. step_distance = .0025
  715. endstop_pin = ^!ar19
  716. position_endstop = 0.5
  717. position_max = 220
  718. homing_speed = 15
  719.  
  720. [extruder]
  721. step_pin = ar26
  722. dir_pin = ar28
  723. enable_pin = !ar24
  724. step_distance = .002
  725. nozzle_diameter = 0.400
  726. filament_diameter = 1.750
  727. heater_pin = ar10
  728. sensor_type = EPCOS 100K B57560G104F
  729. sensor_pin = analog14
  730. control = pid
  731. pid_kp = 22.2
  732. pid_ki = 1.08
  733. pid_kd = 114
  734. min_temp = 0
  735. max_temp = 250
  736.  
  737. [verify_heater extruder]
  738. heating_gain = 2
  739. check_gain_time = 25
  740. hysteresis = 7.5
  741. max_error = 240
  742.  
  743. [heater_bed]
  744. heater_pin = ar8
  745. sensor_type = EPCOS 100K B57560G104F
  746. sensor_pin = analog13
  747. control = pid
  748. pid_kp = 54.027
  749. pid_ki = 0.770
  750. pid_kd = 948.182
  751. min_temp = 0
  752. max_temp = 130
  753.  
  754. [fan]
  755. pin = ar9
  756. max_power = 1.0
  757. cycle_time = 0.05
  758. kick_start_time = 0.1
  759.  
  760. [mcu]
  761. serial = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A506DEP7-if00-port0
  762. pin_map = arduino
  763. baud = 250000
  764.  
  765. [printer]
  766. kinematics = cartesian
  767. max_velocity = 300
  768. max_accel = 3000
  769. max_z_velocity = 20
  770. max_z_accel = 1000
  771. max_accel_to_decel = 2500
  772. square_corner_velocity = 5
  773.  
  774. [homing_override]
  775. set_position_z = 5
  776. gcode = G1 Z10 F500
  777. G28
  778. axes = z
  779.  
  780. [virtual_sdcard]
  781. path = ~/.octoprint/uploads/
  782.  
  783. [force_move]
  784. enable_force_move = True
  785. =======================
  786. Extruder max_extrude_ratio=0.266081
  787. Starting serial connect
  788. got {'#receive_time': 593.3030358670001, u'next_clock': 692305408, u'oid': 4, u'value': 7464, '#name': u'analog_in_state', '#sent_time': 593.2546244609999}
  789. got {'#receive_time': 593.4000335750001, u'next_clock': 693745408, u'oid': 13, u'value': 605, '#name': u'analog_in_state', '#sent_time': 593.3575002939999}
  790. got {'#receive_time': 593.6079161790001, u'next_clock': 697105408, u'oid': 4, u'value': 7444, '#name': u'analog_in_state', '#sent_time': 593.5618486789999}
  791. Loaded MCU 'mcu' 77 commands (v0.7.0-457-g777013d-20190511_224917-octopi / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125)
  792. MCU 'mcu' config: RECEIVE_WINDOW=192 BUS_PINS_spi=PB3,PB2,PB1 SOFT_PWM_MAX=256 SERIAL_BAUD=250000 STEP_DELAY=-1 ADC_MAX=1023 PWM_MAX=255 RESERVE_PINS_serial=PE0,PE1 BUS_PINS_twi=PD0,PD1 MCU=atmega2560 STATS_SUMSQ_BASE=256 CLOCK_FREQ=16000000
  793. Configured MCU 'CLOCK_FREQ' (634 moves)
  794. Starting heater checks for extruder
  795. Starting heater checks for heater_bed
  796. Stats 593.7: gcodein=5 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=748 bytes_read=3551 bytes_retransmit=29 bytes_invalid=0 send_seq=94 receive_seq=83 retransmit_seq=53 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=3 freq=15867917 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=580.472 buffer_time=0.247 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
  797. MCU 'mcu' shutdown: Missed scheduling of next pwm event
  798. clocksync state: mcu_freq=16000000 last_clock=9282552443 clock_est=(593.223 9276339192 15867917.939) min_half_rtt=0.000328 min_rtt_time=593.255 time_avg=593.223(0.018) clock_avg=9276339192.532(292842.812) pred_variance=189969811.469
  799. Dumping serial stats: bytes_write=756 bytes_read=3623 bytes_retransmit=29 bytes_invalid=0 send_seq=95 receive_seq=95 retransmit_seq=53 srtt=0.012 rttvar=0.004 rto=0.029 ready_bytes=0 stalled_bytes=0
  800. Dumping send queue 84 messages
  801. Sent 0 591.154834 591.154834 8: seq: 11, identify offset=0 count=40
  802. Sent 1 591.655420 591.655420 8: seq: 1c, identify offset=0 count=40
  803. Sent 2 591.659472 591.659472 8: seq: 1d, identify offset=40 count=40
  804. Sent 3 591.675850 591.675850 8: seq: 1e, identify offset=80 count=40
  805. Sent 4 591.692186 591.692186 9: seq: 1f, identify offset=120 count=40
  806. Sent 5 591.708552 591.708552 9: seq: 10, identify offset=160 count=40
  807. Sent 6 591.723689 591.723689 9: seq: 11, identify offset=200 count=40
  808. Sent 7 591.740084 591.740084 9: seq: 12, identify offset=240 count=40
  809. Sent 8 591.756513 591.756513 9: seq: 13, identify offset=280 count=40
  810. Sent 9 591.771614 591.771614 9: seq: 14, identify offset=320 count=40
  811. Sent 10 591.787927 591.787927 9: seq: 15, identify offset=360 count=40
  812. Sent 11 591.808342 591.808342 9: seq: 16, identify offset=400 count=40
  813. Sent 12 591.823336 591.823336 9: seq: 17, identify offset=440 count=40
  814. Sent 13 591.839673 591.839673 9: seq: 18, identify offset=480 count=40
  815. Sent 14 591.856056 591.856056 9: seq: 19, identify offset=520 count=40
  816. Sent 15 591.872469 591.872469 9: seq: 1a, identify offset=560 count=40
  817. Sent 16 591.895187 591.895187 9: seq: 1b, identify offset=600 count=40
  818. Sent 17 591.911563 591.911563 9: seq: 1c, identify offset=640 count=40
  819. Sent 18 591.927936 591.927936 9: seq: 1d, identify offset=680 count=40
  820. Sent 19 591.944301 591.944301 9: seq: 1e, identify offset=720 count=40
  821. Sent 20 591.959431 591.959431 9: seq: 1f, identify offset=760 count=40
  822. Sent 21 591.975860 591.975860 9: seq: 10, identify offset=800 count=40
  823. Sent 22 591.992191 591.992191 9: seq: 11, identify offset=840 count=40
  824. Sent 23 592.007299 592.007299 9: seq: 12, identify offset=880 count=40
  825. Sent 24 592.023708 592.023708 9: seq: 13, identify offset=920 count=40
  826. Sent 25 592.040109 592.040109 9: seq: 14, identify offset=960 count=40
  827. Sent 26 592.055173 592.055173 9: seq: 15, identify offset=1000 count=40
  828. Sent 27 592.071586 592.071586 9: seq: 16, identify offset=1040 count=40
  829. Sent 28 592.087933 592.087933 9: seq: 17, identify offset=1080 count=40
  830. Sent 29 592.106922 592.106922 9: seq: 18, identify offset=1120 count=40
  831. Sent 30 592.123337 592.123337 9: seq: 19, identify offset=1160 count=40
  832. Sent 31 592.139680 592.139680 9: seq: 1a, identify offset=1200 count=40
  833. Sent 32 592.155896 592.155896 9: seq: 1b, identify offset=1200 count=40
  834. Sent 33 592.156194 592.156194 9: seq: 1c, identify offset=1240 count=40
  835. Sent 34 592.656370 592.656370 9: seq: 1d, identify offset=1240 count=40
  836. Sent 35 592.666408 592.666408 9: seq: 1e, identify offset=1280 count=40
  837. Sent 36 592.682693 592.682693 9: seq: 1f, identify offset=1320 count=40
  838. Sent 37 592.712982 592.712982 9: seq: 10, identify offset=1360 count=40
  839. Sent 38 592.729341 592.729341 9: seq: 11, identify offset=1400 count=40
  840. Sent 39 592.744434 592.744434 9: seq: 12, identify offset=1440 count=40
  841. Sent 40 592.760797 592.760797 9: seq: 13, identify offset=1480 count=40
  842. Sent 41 592.777214 592.777214 9: seq: 14, identify offset=1520 count=40
  843. Sent 42 592.803697 592.803697 9: seq: 15, identify offset=1560 count=40
  844. Sent 43 592.820147 592.820147 9: seq: 16, identify offset=1600 count=40
  845. Sent 44 592.836433 592.836433 9: seq: 17, identify offset=1640 count=40
  846. Sent 45 592.851546 592.851546 9: seq: 18, identify offset=1680 count=40
  847. Sent 46 592.867956 592.867956 9: seq: 19, identify offset=1720 count=40
  848. Sent 47 592.884299 592.884299 9: seq: 1a, identify offset=1760 count=40
  849. Sent 48 592.899431 592.899431 9: seq: 1b, identify offset=1800 count=40
  850. Sent 49 592.915809 592.915809 9: seq: 1c, identify offset=1840 count=40
  851. Sent 50 592.932192 592.932192 9: seq: 1d, identify offset=1880 count=40
  852. Sent 51 592.947309 592.947309 9: seq: 1e, identify offset=1920 count=40
  853. Sent 52 592.963656 592.963656 9: seq: 1f, identify offset=1960 count=40
  854. Sent 53 592.980163 592.980163 9: seq: 10, identify offset=2000 count=40
  855. Sent 54 592.995195 592.995195 9: seq: 11, identify offset=2040 count=40
  856. Sent 55 593.016698 593.016698 9: seq: 12, identify offset=2080 count=40
  857. Sent 56 593.033056 593.033056 9: seq: 13, identify offset=2120 count=40
  858. Sent 57 593.048185 593.048185 9: seq: 14, identify offset=2160 count=40
  859. Sent 58 593.064540 593.064540 9: seq: 15, identify offset=2200 count=40
  860. Sent 59 593.080960 593.080960 9: seq: 16, identify offset=2240 count=40
  861. Sent 60 593.097292 593.097292 9: seq: 17, identify offset=2249 count=40
  862. Sent 61 593.152677 593.152437 6: seq: 18, get_uptime
  863. Sent 62 593.203557 593.203317 6: seq: 19, get_clock
  864. Sent 63 593.254624 593.254384 6: seq: 1a, get_clock
  865. Sent 64 593.306449 593.306209 6: seq: 1b, get_clock
  866. Sent 65 593.357500 593.357260 6: seq: 1c, get_clock
  867. Sent 66 593.408573 593.408333 6: seq: 1d, get_clock
  868. Sent 67 593.459580 593.459340 6: seq: 1e, get_clock
  869. Sent 68 593.510702 593.510462 6: seq: 1f, get_clock
  870. Sent 69 593.561849 593.561609 6: seq: 10, get_clock
  871. Sent 70 593.614550 593.614310 6: seq: 11, get_clock
  872. Sent 71 593.614790 593.614501 6: seq: 12, get_config
  873. Sent 72 593.673364 593.672364 25: seq: 13, query_analog_in oid=4 clock=706705408 sample_ticks=16000 sample_count=8 rest_ticks=4800000 min_value=2999 max_value=8070 range_check_count=4
  874. Sent 73 593.673684 593.672622 8: seq: 14, reset_step_clock oid=0 clock=0
  875. Sent 74 593.674164 593.673027 12: seq: 15, end_stop_home oid=8 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0
  876. Sent 75 593.674524 593.673298 9: seq: 16, end_stop_set_stepper oid=8 pos=0 stepper_oid=0
  877. Sent 76 593.674844 593.673528 8: seq: 17, reset_step_clock oid=1 clock=0
  878. Sent 77 593.675324 593.673921 12: seq: 18, end_stop_home oid=10 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0
  879. Sent 78 593.675684 593.674195 9: seq: 19, end_stop_set_stepper oid=10 pos=0 stepper_oid=1
  880. Sent 79 593.676004 593.674420 8: seq: 1a, reset_step_clock oid=2 clock=0
  881. Sent 80 593.676484 593.674791 12: seq: 1b, end_stop_home oid=12 clock=0 sample_ticks=0 sample_count=0 rest_ticks=0 pin_value=0
  882. Sent 81 593.676844 593.675065 9: seq: 1c, end_stop_set_stepper oid=12 pos=0 stepper_oid=2
  883. Sent 82 593.677844 593.675621 25: seq: 1d, query_analog_in oid=13 clock=708145408 sample_ticks=16000 sample_count=8 rest_ticks=4800000 min_value=375 max_value=8070 range_check_count=4
  884. Sent 83 593.688202 593.687882 8: seq: 1e, reset_step_clock oid=3 clock=0
  885. Dumping receive queue 88 messages
  886. Receive: 0 591.195483 0.000000 14: seq: 1c, analog_in_state oid=4 next_clock=658705408 value=7472
  887. Receive: 1 591.276106 0.000000 14: seq: 1c, analog_in_state oid=13 next_clock=660145408 value=613
  888. Receive: 2 591.500350 0.000000 14: seq: 1c, analog_in_state oid=4 next_clock=663505408 value=7456
  889. Receive: 3 591.579739 0.000000 14: seq: 1c, analog_in_state oid=13 next_clock=664945408 value=619
  890. Receive: 4 591.659095 591.655420 48: seq: 1d, identify_response offset=0 data='x\xda\x9dX{o\x1b\xb9\x11\xff*<\x01A{\x85mhW/\xcbE\xfe\xb0e\xe5\xce\xbd\xd8\xf1Ev\xd3\xa2(\x08z\x97\x92\x08'
  891. Receive: 5 591.675474 591.659472 48: seq: 1e, identify_response offset=40 data='\xef\xeb\x96\\\xcb\xba\x83\xbf{g8$w\xf5H\xd2\xd6\x80!>\x86\xc3\xe1<\x7f\xb3\x7f\xf4\x9e\x1a\x95\xa5\xfcE\xd6Z\x95\x85\xee]'
  892. Receive: 6 591.691848 591.675850 48: seq: 1f, identify_response offset=80 data='\xf4VIr\xc1\xfe\xfc\xd3l\xf6#\x1b\x9d\r\xcf\xfa\xecI\x15\x8dQ\x99\xc6\xd5\xbbGv\xe5\xa6?\xb2\xf8,\x1e\x9f\xc5\xfdh\xdc\x8f'
  893. Receive: 7 591.708221 591.692186 49: seq: 10, identify_response offset=120 data="\xe2Q\xef\xa4\x97\x94y.\x8a\x14\x98\xfc\xd1\x13YV&\xc2H^\xaaT\xb3\xa4l\n\xf3\xfe]\xd2\xbb\x88F'p\xa51p\x17\x17"
  894. Receive: 8 591.723345 591.708552 49: seq: 11, identify_response offset=160 data='\xc93\x83mX\xef\x10\x8c;\xfbi\xea\xf7\xabR\xdb\x1fU\xbc\x7f\xd7\xb0\xaa\xc92\xdeT\x96>\x9e\xb4\x07~kd\xbd\r,A\x80'
  895. Receive: 9 591.739713 591.723689 49: seq: 12, identify_response offset=200 data='g\xa4\xae\xa56\xdc\xa8\xe4Y\xd3\xcc\xd4\xa2\xd0\xb92\xbc#\x15\xdc\x9adR\xd4\\\xaf\x1b\x93\x96\x9b\xa2w1\xc4\x07\x15K\xb5\xe2\xa2'
  896. Receive: 10 591.756104 591.740084 49: seq: 13, identify_response offset=240 data='\x10Y\xb9\xe2\xaa\x08\xd2X1\x80d\x1ah\x9c\x08\x9e\x82\xa6\x9d\x1b\x06\x812U+eD\xc6\xcb\xc6\xec\xf2c/"k$\xceS\xb9'
  897. Receive: 11 591.771228 591.756513 49: seq: 14, identify_response offset=280 data='\x14MfxX\xc8\xc5+O\x9bZ\x18\xb0\x91\xbd9\xee\x07~\xb2H\xb96e\xb5\xc3,\xe9\xe8\x88i#\xabJ\xd6]i\xa2p|'
  898. Receive: 12 591.787591 591.771614 49: seq: 15, identify_response offset=320 data='\x9d\x0e\x87\x93\xf3\xbe?]k\xee\xa4\x91~\x90\x0e\xc3h\x14F\xe30\x9a\x84\x91\xcc\xc46(\x1ad\x1c\x85KT\x9c\xf8\x0b`\x08\xca'
  899. Receive: 13 591.807840 591.771614 14: seq: 15, analog_in_state oid=4 next_clock=668305408 value=7455
  900. Receive: 14 591.807853 591.787927 49: seq: 16, identify_response offset=360 data='"S\x80\x7f\xe0/\xd8\x19lD\x87F\xe7\xe1P\xb5\xc9\x8f()\xd9\x82\xa1Zs:\x15\xad\x9b}\xa5\xc1\xca\x81\xd6\xa2Vk\xba\\'
  901. Receive: 15 591.822973 591.808342 49: seq: 17, identify_response offset=400 data='\x9a\xff\xe9\x86\xff\xc6*\xd1\xf9\x0e\xff\x8d\xa8%\xd7\x95\xf2\xfcu\x92={e\xe5\xa5Va\xact\xd9\xae\xa7\xb2\xa3\x1b\xe09iyv'
  902. Receive: 16 591.839341 591.823336 49: seq: 18, identify_response offset=440 data='XU\xcak\xf1\xf8A\xe6\x1d\x99\xe7z\xf5\xfe\xdd_ (w\x18\xf1e]\xe6A\xca\xc0v\xc3\xed(p=\xe4\x12E;l6\xca'
  903. Receive: 17 591.855716 591.839673 49: seq: 19, identify_response offset=480 data='\xacA\x85<\xd1GD\xfb\xbeL\xa3\x8eE\xccd\x1a\x07?L\x82\x1fv\xb5\xa6U\x1a\x86\xdb"\xe1\xbb.\xc7\x92<\xe5\xfb^8\x18'
  904. Receive: 18 591.872101 591.856056 49: seq: 1a, identify_response offset=520 data='tn\xb0q\x10\x04\x85)w\xd1\x92\xaa\xda\x0fsU\xd8x\x82x7\xb2\x06c#gU@\x864\x96\x03\x05P\x1b\xf9f-\xeb\xbc'
  905. Receive: 19 591.894845 591.872469 49: seq: 1b, identify_response offset=560 data="\x84\xd8\xaa2\xd9\xd5\x81\x1bv\xb7\xb9\xd9V\x92\xb2V\xeb)&O\x1aQ\x07'\xac_\xf9A\x96c&,>)\xcce9\xf9\xc6\x08"
  906. Receive: 20 591.894856 591.872469 14: seq: 1b, analog_in_state oid=13 next_clock=669745408 value=624
  907. Receive: 21 591.911223 591.895187 49: seq: 1c, identify_response offset=600 data='\xd2V*\x9f\x9a\x15/ \xfeSa\x84\xd3\xea\xd4\xaf\xc3\xa9Ug#\x8a\xfdF-\x05$\xd7:\x955\xf2\xc7\x08\xa4\x8c\x168nj'
  908. Receive: 22 591.927592 591.911563 49: seq: 1d, identify_response offset=640 data='e\xe4\x01\x05#}\x00!\xa8U\xe6\xb2^\xc9"\xd9Z}\x81R eb6Z\xd5\xf0Z \x89hj\x95\xb9.sy\x90\x99\xb5'
  909. Receive: 23 591.943966 591.927936 49: seq: 1e, identify_response offset=680 data='\xc8\xabn\xa8\xb9\xb9\xcfS{\x99\x1b\xde\x12b\x0f.\x1bu\xb8\xdb\xc4\x0fCa\xfc%\xa0\x84\xee\xf5Z\x9a}\xf3\xbb\x92\xe2\x93\xa3?'
  910. Receive: 24 591.959088 591.944301 49: seq: 1f, identify_response offset=720 data='6\x84G,\x15d|\xf5;J\x82&bI\x9dPF;\xe9\xad\x80\x91\x95\x1f$\x98\xb8\xa9%\x82\x93n\xbb\xa9\xd0@\xbd\x0b0\xb1'
  911. Receive: 25 591.975477 591.959431 49: seq: 10, identify_response offset=760 data='K\xaep=\x08\x02\xde\x19\x82\x04\xc7d\x92\xe9\x1e\x15\x1a\xcbS\xb5\x86\x8b\xc1.\x989!\xa2\xd4r\xcb\xc1\x0b\x02\xabZ\xdaXb\xae'
  912. Receive: 26 591.991842 591.975860 49: seq: 11, identify_response offset=800 data='~\x81\x00\xb8\xeb\x1caH\xc7\xc8\xda\xbb\xf4\xb8\xc63\xe92\xd7\x80\x08\x9d\xd5\xf7\xaf\x1f@\x98\xaaT\x16\x06.g\xe5r\t\xb7\xd8x'
  913. Receive: 27 592.006965 591.992191 49: seq: 12, identify_response offset=840 data='k\x0b\xe8I\x8flpP+\xffOc\xe7\xad\xb1]&ogP\xbfWpp-\x93\xe7NM\x8bc/\xc3\xb1\x88\xfc\n\x1a\xe8\\'
  914. Receive: 28 592.023346 592.007299 49: seq: 13, identify_response offset=880 data="\xb3s\x0bz\xf8\xb9\xe5\xd7H\xeb8\xa1|u\x92\x82\xbb{m+\x18\xfc*\x10\x02\x14\x017H\x03:\x8b\xdd\xd0\x9e'\xa7\xd9\x97\x06"
  915. Receive: 29 592.039719 592.023708 49: seq: 14, identify_response offset=920 data='\x0e\x80\xe25<%m@\x17G\xa0A\x90\xbb\xf5\xfcx\xd89\xb2W\xc2\xf6\xc9\xd7\xf8\x90~\x87\xfeX\xdd;vh\x04\xd2\xa3\xec]'
  916. Receive: 30 592.054843 592.040109 49: seq: 15, identify_response offset=960 data='\x91\xf6`\n\x10\x11M!_\xdd#!\x8d\x06\xe7Q5\xd18"\x7f\xe7w\xca8\x88\x0ba\x85\xf9\x13\xa3\xe1\xd0\x13\xa3)\xedZ\x10'
  917. Receive: 31 592.071223 592.055173 49: seq: 16, identify_response offset=1000 data='\xb7l\xa3\xb9\x13*Hak\xc9\xb7\xc2n4\xd8\xa5:\x1ev\x831RAv\xa6\x9c\xd6\xb1\xdb\x10\x9f\xe5R\x07\x06=d\x13\x858'
  918. Receive: 32 592.087591 592.071586 49: seq: 17, identify_response offset=1040 data=' \xa4\x9f\x08\xac\xe4R\xfb\xceSl\x84\x85\x00\xa4T\x06\x9e\xd6T)\xa2\xe5#\x1e\xd0Q\xf7\xe4\xcdW\r\x84\xd8\x97\xd73~{\xf9'
  919. Receive: 33 592.106592 592.087933 49: seq: 18, identify_response offset=1080 data='\x0f\x845\xe8EW\x8f\x0b~\x7fs\xb7\xc0\xb2\x0c0\xfe\xfejpr\x7f\x15\xc3\x7f\xd4\xebl\x9a\x8d\xdd\xbc\xee\x9f\xdc_\xe3\xc6\xec\xe3'
  920. Receive: 34 592.106603 592.087933 14: seq: 18, analog_in_state oid=4 next_clock=673105408 value=7456
  921. Receive: 35 592.122980 592.106922 49: seq: 19, identify_response offset=1120 data='\xa7\xd9/\xfc\xc3\xe7\xf9\xaf\x88\x82\xfb\xf6\xef\xa4w;{\x04*ar\xb9\x12\xf1h\xdc\x07\xc2\xfb/\xb7t[\x8c\x16\xfd<\x9f\xcdo'
  922. Receive: 36 592.139339 592.123337 49: seq: 1a, identify_response offset=1160 data='\xfe>\xe7_n\xee\xae?}A\xb3\xc4\xb8\xb8\x98\x7f\x86E\x92B\xd6Jdx\xd7\x1c\xee\x9a\xe3]\xb0{s\xf9\x91_]>^#'
  923. Receive: 37 592.155717 592.139680 49: seq: 1b, identify_response offset=1200 data='\x1b\xbaj\xf1\xe9\xc3\x03\xef0\x07\x8d/\x1e.\x1f\x16|\xf1x\xbb\xf8\x15\x88\x17\xf3\xb0<\xbf\xe7\xd7\xf3\x8f\x97\xff\xec]\x9cFo\x98'
  924. Receive: 38 592.170851 592.155896 49: seq: 1c, identify_response offset=1200 data='\x1b\xbaj\xf1\xe9\xc3\x03\xef0\x07\x8d/\x1e.\x1f\x16|\xf1x\xbb\xf8\x15\x88\x17\xf3\xb0<\xbf\xe7\xd7\xf3\x8f\x97\xff\xec]\x9cFo\x98'
  925. Receive: 39 592.187215 592.156194 14: seq: 1d, analog_in_state oid=13 next_clock=674545408 value=604
  926. Receive: 40 592.395120 592.156194 14: seq: 1d, analog_in_state oid=4 next_clock=677905408 value=7462
  927. Receive: 41 592.490865 592.156194 14: seq: 1d, analog_in_state oid=13 next_clock=679345408 value=599
  928. Receive: 42 592.665979 592.656370 49: seq: 1e, identify_response offset=1240 data="\xdd\x1b\xa8@\x16~\xd9\x9e\xc3AK\x1c\xdag\xf6\x81\x06\xdc\r\xe7\xf7\x97\xfd\xde\xc5\xbf\xfa'\xe7\xff\x86\x97\\\xe1\xf8\x9c\xc63\x1c\x03"
  929. Receive: 43 592.682345 592.666408 49: seq: 1f, identify_response offset=1280 data="\xfc\xb7\x93k\x9c@x\xd9\xc9\x1c'\x10\xc4v\xf2\x01'Cw\xfe';q\x0c~\xc6\xc9\xc81\xf8\x1bN&\xee\xcc/\xf6\x1aw\xe6"
  930. Receive: 44 592.712596 0.000000 49: seq: 10, identify_response offset=1320 data="\xa3\x9d\xe0\x997r`'\xa85\x16\n\x8a\xc5K%\x10F5\x94l\xaeRgaf=aI9\x8f\xba\x9d\xcb\x0c=g\xcb|\x95"
  931. Receive: 45 592.712610 0.000000 14: seq: 10, analog_in_state oid=4 next_clock=682705408 value=7454
  932. Receive: 46 592.728985 592.712982 49: seq: 11, identify_response offset=1360 data='J)}\xcfD\xc1\x8a\xd2\xb0FK\x86\x05\xa8\x8e\xd8\xb2\xac\x19\xa8\xf6\xaf~\xae4\xee\xa6v\xdd.iJsp\xf4O\x86\t\xad\xd5'
  933. Receive: 47 592.744094 592.729341 49: seq: 12, identify_response offset=1400 data='\xca:0\xa1<Z\xb5)\xccR\xb3\xcdZ\x16\xbe^2\x91\x18\xf5")\xed\xce\xa8\xf1c\x95\xa8\xc1\xecL\xd6uY[\xbc\xe97j'
  934. Receive: 48 592.760464 592.744434 49: seq: 13, identify_response offset=1440 data='\t\x99T\x1b[\x13?\x08\x95\x81\x0c\xa6d6,\xb05\xb0!F\xa5\xf7\xa6\x00\x7fW)\xf3\xfdT\xdb\xaeQ\xba%\x94\xe1\xa9\\\xc7'
  935. Receive: 49 592.776851 592.760797 49: seq: 14, identify_response offset=1480 data='i3Q\xbb\x06d(\x8a\xc8%\xe4jJ\xb1~3/_\xa4\x97\x06\xd0\xe4\xef\x92\x02\xd5o\xc3\xdb\x19b4BJ~\x15q7B'
  936. Receive: 50 592.803340 0.000000 49: seq: 15, identify_response offset=1520 data='Y\x82m\x9dU\xac\xb6\x90\x15\xc2]\x9a@\x80\xa7\xd8\xa9C\xc9ZU\x8e7v_\xb7\xe2\x15\xcdz\xee\x1fJ\xb9\xe6\x16\xda \xb1\x92'
  937. Receive: 51 592.803353 0.000000 14: seq: 15, analog_in_state oid=13 next_clock=684145408 value=611
  938. Receive: 52 592.819726 592.803697 49: seq: 16, identify_response offset=1560 data='\x0c@\x15\xdc\xe7\x15\x89\x1bJ\xa3\xe1\\\x1aGP\x07\x871\xef2\xf9"Q+\xd8z|\x9dh-j\xb0\xce&\xf7\xd4\x08\x8a\xbfN'
  939. Receive: 53 592.836094 592.820147 49: seq: 17, identify_response offset=1600 data='\r1\xe3\t\xb1\x9e}\x83\xb0\xe5\x88\r\xe9-*\xd7\x96L&\xf3\xcal\xa9\xdb\xbf+\x89\x18\x1d\x87\x9a\xc2;\xf0R\xc1HG\xe8\xe2'
  940. Receive: 54 592.851215 592.836433 49: seq: 18, identify_response offset=1640 data='6F\x11-v7\xc0o\xdd\xc6twC\x15\x15\x95\x11B\xe1v\xab\xc00\t\xcbX\xf0\xf0\xb8p\x81R\xd5\xe5\n,\x94\xc3#\x84'
  941. Receive: 55 592.867598 592.851546 49: seq: 19, identify_response offset=1680 data='\x81\xc2\xb4\x84\xba\x01B\x83\x05%\x06\x0f\x16\x9c\xcf\xd2W\xc8\x94"\x03\xaeA\xfb\x81m\xd1m1C/ \x0c\xc8Xv\x11\xd1\x82\xca'
  942. Receive: 56 592.883967 592.867956 49: seq: 1a, identify_response offset=1720 data='\x9b\xdc\xafy\xef\x1c\x11\xa5\x0f\x93\x1dR\xbf\xe8h\x11\xd4-\\KD\xf0\rn\xb7A\x86q\xdc~\x89\x00\x97Z\xb8\x93\xa6,\xd9R'
  943. Receive: 57 592.899095 592.884299 49: seq: 1b, identify_response offset=1760 data='X\xe9H2\x04\x03\x0f]?;\xcc\x19\x08\xdevHP+\xc0\xcbv\xb3T/\x1f\xec\x93\x919T8-\xed\xe7\x8a\xc7B7UU'
  944. Receive: 58 592.915466 592.899431 49: seq: 1c, identify_response offset=1800 data='\xd6FR\x90\xda\x84\x85\xfd\xc1\x17a\x92uZ\xaeHQ?P\x13g\xbf\xf7\x00&k\x8ag`\x8c\x11N\xadkg]\xb7\x1b\xe3\xd0'
  945. Receive: 59 592.931847 592.915809 49: seq: 1d, identify_response offset=1840 data="\xfdPz)\x8bl\xcb\xc4\x0bl\x8b\xa7\xcc'\x9a\xf0\xfe\xa9\xc5\xa6\xf6:x\x19\xd5\xde=0|\xc1>\xa5)\x83z\xf0\x84\x90`\x89"
  946. Receive: 60 592.946967 592.932192 49: seq: 1e, identify_response offset=1880 data='m\x92\xfe\x810X\xc0\xbfV\xa9\xe1I`2\xf1RS#C\xfe\t\xc8\x88<\xfa\xd5@b\xd2\xf0\xab\xb4Aw\x87E\x02\x1e\xf6['
  947. Receive: 61 592.963338 592.947309 49: seq: 1f, identify_response offset=1920 data='\x96\xf7*\xff\x85+\xa5\xef\n\x1a\xd1q!3\xe7>\tl[\xe7\n(\xc0\xc2\n\xab\xe3L\xd4\xd6.X\xce\x0f\xdaC\xcc\xfbP\n'
  948. Receive: 62 592.979727 592.963656 49: seq: 10, identify_response offset=1960 data='\x07\xd1\xf9h\x04\x95\xe1\xc4O\xc6\x16d\xd3d<\xb2N\x01\x93\xf1x\x02\xe3\xc1\xdb\x9b\xc5\x9a\x15$\x12I\x9f\xdf<\x0c\xdfi\x8al'
  949. Receive: 63 592.994845 592.980163 49: seq: 11, identify_response offset=2000 data=' \xf2cpo\x12\xb5_\xd1vN\x88\x0e\xc6fv\xc7}L\xc0\x8f;\x16\xd2\xb6\x98h\x1c>\xf8@\xa5qm\x91E]\xb6}\xb2'
  950. Receive: 64 593.016345 592.995195 49: seq: 12, identify_response offset=2040 data='\xb9\x97\xb7\x98\x19H\xbc\x89\xe9\xc3\xdf\xb8\xedM5xfh5\xc7\xe7\xddF\xae+\x1c4\x95`\x1f\xf7\xe9\xa6\xd3\x1bN\xfa\xad\xd9\xb9'
  951. Receive: 65 593.016357 592.995195 14: seq: 12, analog_in_state oid=4 next_clock=687505408 value=7458
  952. Receive: 66 593.032727 593.016698 49: seq: 13, identify_response offset=2080 data='\xd7K\xdb\xff\xd0\xdc\xbdc\xd8v6\x1d\xd2\xd0\xe2\x10\x16<CRd\xda\xca\xcc\xf6\x0b6)r\x0c\x8a\x04\x1e\xdd\xa6{\x8c\x80\xb6\r'
  953. Receive: 67 593.047846 593.033056 49: seq: 14, identify_response offset=2120 data='s\xdf\x0e\x1d?\x1e\xef\xc2\xdb\xefI\x1f;|\n<\xe0p\x9f`D\xf8\xde\n\xb74\xb9\xfb\xd1\xbf\x912\x07-n\xdd\xc3\xac\xd4\x11'
  954. Receive: 68 593.064216 593.048185 49: seq: 15, identify_response offset=2160 data='\x03\x1c\x19O\xf7\xfc\xd2\x19\xe4[N\xd4P:!\xf5\x0fZ\xe8{(?\x82^+\xfb\x18Q\xaf\x05\x16k\xb5Z\xdb\xa6\xa0u\xa5!'
  955. Receive: 69 593.080600 593.064540 49: seq: 16, identify_response offset=2200 data='x\xb4\xfb(\r\x18\xf2\xa5\x7f69\xeb\x9f\x0eG\x93\xd3\xd5d2\xe9G\x83\xf44\xeeG\xd3\xfe(\x8ax\x1c\x0f\xa7\xd1\xe4\xb4L\xc0'
  956. Receive: 70 593.096969 593.080960 18: seq: 17, identify_response offset=2240 data='?T\xef\xed?|\x12\x967'
  957. Receive: 71 593.096981 593.080960 14: seq: 17, analog_in_state oid=13 next_clock=688945408 value=608
  958. Receive: 72 593.112090 593.097292 9: seq: 18, identify_response offset=2249 data=''
  959. Receive: 73 593.159506 593.152677 12: seq: 19, uptime high=2 clock=685288494
  960. Receive: 74 593.207406 593.203557 11: seq: 1a, clock clock=686095436
  961. Receive: 75 593.255281 593.254624 11: seq: 1b, clock clock=686905761
  962. Receive: 76 593.303036 593.254624 14: seq: 1b, analog_in_state oid=4 next_clock=692305408 value=7464
  963. Receive: 77 593.319535 593.306449 11: seq: 1c, clock clock=687728410
  964. Receive: 78 593.367406 593.357500 11: seq: 1d, clock clock=688538272
  965. Receive: 79 593.400034 593.357500 14: seq: 1d, analog_in_state oid=13 next_clock=693745408 value=605
  966. Receive: 80 593.415283 593.408573 11: seq: 1e, clock clock=689348913
  967. Receive: 81 593.463155 593.459580 11: seq: 1f, clock clock=690158147
  968. Receive: 82 593.527397 593.510702 11: seq: 10, clock clock=690969442
  969. Receive: 83 593.575288 593.561849 11: seq: 11, clock clock=691781206
  970. Receive: 84 593.607916 593.561849 14: seq: 11, analog_in_state oid=4 next_clock=697105408 value=7444
  971. Receive: 85 593.623168 593.614550 11: seq: 12, clock clock=692617851
  972. Receive: 86 593.623025 593.614790 15: seq: 13, config is_config=1 crc=709464081 move_count=634 is_shutdown=0
  973. Receive: 87 593.815880 593.688202 12: seq: 1f, shutdown clock=695633591 static_string_id=Missed scheduling of next pwm event
  974. Dumping gcode input 1 blocks
  975. Read 590.999984: 'M105\n'
  976. gcode state: absolutecoord=True absoluteextrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.0166666666667 extrude_factor=1.0 speed=1500.0
  977. Stats 594.7: gcodein=5 mcu: mcu_awake=0.022 mcu_task_avg=0.000117 mcu_task_stddev=0.000081 bytes_write=762 bytes_read=3654 bytes_retransmit=29 bytes_invalid=0 send_seq=96 receive_seq=96 retransmit_seq=53 srtt=0.013 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868150 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
  978. Stats 595.7: gcodein=10 mcu: mcu_awake=0.022 mcu_task_avg=0.000117 mcu_task_stddev=0.000081 bytes_write=768 bytes_read=3754 bytes_retransmit=29 bytes_invalid=0 send_seq=97 receive_seq=97 retransmit_seq=53 srtt=0.012 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868260 heater_bed: target=0 temp=42.8 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.5 pwm=0.000
  979. MCU 'mcu' shutdown: Missed scheduling of next pwm event
  980. This is generally indicative of an intermittent
  981. communication failure between micro-controller and host.
  982. Once the underlying issue is corrected, use the
  983. "FIRMWARE_RESTART" command to reset the firmware, reload the
  984. config, and restart the host software.
  985. Printer is shutdown
  986.  
  987. Stats 596.7: gcodein=20 mcu: mcu_awake=0.022 mcu_task_avg=0.000117 mcu_task_stddev=0.000081 bytes_write=774 bytes_read=3868 bytes_retransmit=29 bytes_invalid=0 send_seq=98 receive_seq=98 retransmit_seq=53 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868246 heater_bed: target=0 temp=43.1 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.1 pwm=0.000
  988. Stats 597.7: gcodein=20 mcu: mcu_awake=0.022 mcu_task_avg=0.000117 mcu_task_stddev=0.000081 bytes_write=780 bytes_read=3982 bytes_retransmit=29 bytes_invalid=0 send_seq=99 receive_seq=99 retransmit_seq=53 srtt=0.012 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=0 temp=43.1 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.4 pwm=0.000
  989. MCU 'mcu' shutdown: Missed scheduling of next pwm event
  990. This is generally indicative of an intermittent
  991. communication failure between micro-controller and host.
  992. Once the underlying issue is corrected, use the
  993. "FIRMWARE_RESTART" command to reset the firmware, reload the
  994. config, and restart the host software.
  995. Printer is shutdown
  996.  
  997. Stats 598.7: gcodein=29 mcu: mcu_awake=0.022 mcu_task_avg=0.000117 mcu_task_stddev=0.000081 bytes_write=786 bytes_read=4082 bytes_retransmit=29 bytes_invalid=0 send_seq=100 receive_seq=100 retransmit_seq=53 srtt=0.011 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868310 heater_bed: target=0 temp=43.4 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.7 pwm=0.000
  998. Stats 599.7: gcodein=29 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=792 bytes_read=4181 bytes_retransmit=29 bytes_invalid=0 send_seq=101 receive_seq=101 retransmit_seq=53 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868323 heater_bed: target=0 temp=43.1 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.1 pwm=0.000
  999. Stats 600.7: gcodein=34 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=798 bytes_read=4295 bytes_retransmit=29 bytes_invalid=0 send_seq=102 receive_seq=102 retransmit_seq=53 srtt=0.011 rttvar=0.004 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868339 heater_bed: target=0 temp=43.4 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.1 pwm=0.000
  1000. Stats 601.7: gcodein=39 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=804 bytes_read=4395 bytes_retransmit=29 bytes_invalid=0 send_seq=103 receive_seq=103 retransmit_seq=53 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868341 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=216.6 pwm=0.000
  1001. Got error -1 in read: (11)Resource temporarily unavailable
  1002. Stats 602.7: gcodein=39 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=810 bytes_read=4481 bytes_retransmit=29 bytes_invalid=0 send_seq=104 receive_seq=104 retransmit_seq=53 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868345 heater_bed: target=0 temp=43.4 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.2 pwm=0.000
  1003. Stats 603.7: gcodein=39 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=810 bytes_read=4481 bytes_retransmit=29 bytes_invalid=0 send_seq=104 receive_seq=104 retransmit_seq=53 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=1 freq=15868345 heater_bed: target=0 temp=43.4 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.2 pwm=0.000
  1004. Stats 604.7: gcodein=39 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=810 bytes_read=4481 bytes_retransmit=29 bytes_invalid=0 send_seq=104 receive_seq=104 retransmit_seq=53 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=15868345 heater_bed: target=0 temp=43.4 pwm=0.000 print_time=580.411 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.2 pwm=0.000
  1005. Attempting MCU 'mcu' reset
  1006. Restarting printer
  1007. Start printer at Sat May 11 23:23:03 2019 (1557613383.7 606.5)
  1008. ===== Config file =====
  1009. [stepper_x]
  1010. step_pin = ar54
  1011. dir_pin = ar55
  1012. enable_pin = !ar38
  1013. step_distance = .0125
  1014. endstop_pin = ^!ar2
  1015. position_endstop = 0
  1016. position_max = 220
  1017. homing_speed = 50
  1018.  
  1019. [stepper_y]
  1020. step_pin = ar60
  1021. dir_pin = !ar61
  1022. enable_pin = !ar56
  1023. step_distance = .0125
  1024. endstop_pin = ^!ar15
  1025. position_endstop = 200
  1026. position_max = 200
  1027. homing_speed = 50
  1028.  
  1029. [stepper_z]
  1030. step_pin = ar46
  1031. dir_pin = ar48
  1032. enable_pin = !ar62
  1033. step_distance = .0025
  1034. endstop_pin = ^!ar19
  1035. position_endstop = 0.5
  1036. position_max = 220
  1037. homing_speed = 15
  1038.  
  1039. [extruder]
  1040. step_pin = ar26
  1041. dir_pin = ar28
  1042. enable_pin = !ar24
  1043. step_distance = .002
  1044. nozzle_diameter = 0.400
  1045. filament_diameter = 1.750
  1046. heater_pin = ar10
  1047. sensor_type = EPCOS 100K B57560G104F
  1048. sensor_pin = analog14
  1049. control = pid
  1050. pid_kp = 22.2
  1051. pid_ki = 1.08
  1052. pid_kd = 114
  1053. min_temp = 0
  1054. max_temp = 250
  1055.  
  1056. [verify_heater extruder]
  1057. heating_gain = 2
  1058. check_gain_time = 25
  1059. hysteresis = 7.5
  1060. max_error = 240
  1061.  
  1062. [heater_bed]
  1063. heater_pin = ar8
  1064. sensor_type = EPCOS 100K B57560G104F
  1065. sensor_pin = analog13
  1066. control = pid
  1067. pid_kp = 54.027
  1068. pid_ki = 0.770
  1069. pid_kd = 948.182
  1070. min_temp = 0
  1071. max_temp = 130
  1072.  
  1073. [fan]
  1074. pin = ar9
  1075. max_power = 1.0
  1076. cycle_time = 0.05
  1077. kick_start_time = 0.1
  1078.  
  1079. [mcu]
  1080. serial = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A506DEP7-if00-port0
  1081. pin_map = arduino
  1082. baud = 250000
  1083.  
  1084. [printer]
  1085. kinematics = cartesian
  1086. max_velocity = 300
  1087. max_accel = 3000
  1088. max_z_velocity = 20
  1089. max_z_accel = 1000
  1090. max_accel_to_decel = 2500
  1091. square_corner_velocity = 5
  1092.  
  1093. [homing_override]
  1094. set_position_z = 5
  1095. gcode = G1 Z10 F500
  1096. G28
  1097. axes = z
  1098.  
  1099. [virtual_sdcard]
  1100. path = ~/.octoprint/uploads/
  1101.  
  1102. [force_move]
  1103. enable_force_move = True
  1104. =======================
  1105. Extruder max_extrude_ratio=0.266081
  1106. Starting serial connect
  1107. Loaded MCU 'mcu' 77 commands (v0.7.0-457-g777013d-20190511_224917-octopi / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125)
  1108. MCU 'mcu' config: RECEIVE_WINDOW=192 BUS_PINS_spi=PB3,PB2,PB1 SOFT_PWM_MAX=256 SERIAL_BAUD=250000 STEP_DELAY=-1 ADC_MAX=1023 PWM_MAX=255 RESERVE_PINS_serial=PE0,PE1 BUS_PINS_twi=PD0,PD1 MCU=atmega2560 STATS_SUMSQ_BASE=256 CLOCK_FREQ=16000000
  1109. Sending MCU 'mcu' printer configuration...
  1110. Configured MCU 'CLOCK_FREQ' (634 moves)
  1111. Starting heater checks for extruder
  1112. Starting heater checks for heater_bed
  1113. Stats 609.3: gcodein=5 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=917 bytes_read=3394 bytes_retransmit=0 bytes_invalid=3 send_seq=108 receive_seq=108 retransmit_seq=0 srtt=0.012 rttvar=0.006 rto=0.036 ready_bytes=0 stalled_bytes=0 freq=15867778 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=2.812 buffer_time=0.248 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
  1114. Stats 610.3: gcodein=5 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=923 bytes_read=3461 bytes_retransmit=0 bytes_invalid=3 send_seq=109 receive_seq=109 retransmit_seq=0 srtt=0.012 rttvar=0.006 rto=0.036 ready_bytes=0 stalled_bytes=0 freq=15868087 heater_bed: target=0 temp=43.6 pwm=0.000 print_time=2.812 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.4 pwm=0.000
  1115. Stats 611.3: gcodein=20 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=929 bytes_read=3554 bytes_retransmit=0 bytes_invalid=3 send_seq=110 receive_seq=110 retransmit_seq=0 srtt=0.011 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868247 heater_bed: target=0 temp=43.9 pwm=0.000 print_time=4.266 buffer_time=0.000 print_stall=0 extruder: target=220 temp=207.8 pwm=0.000
  1116. Heater extruder approaching new target of 220.000
  1117. Stats 612.3: gcodein=25 mcu: mcu_awake=0.025 mcu_task_avg=0.000141 mcu_task_stddev=0.000340 bytes_write=935 bytes_read=3675 bytes_retransmit=0 bytes_invalid=3 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.012 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868265 heater_bed: target=0 temp=43.7 pwm=0.000 print_time=4.266 buffer_time=0.000 print_stall=0 extruder: target=220 temp=208.1 pwm=0.000
  1118. Stats 613.3: gcodein=39 mcu: mcu_awake=0.025 mcu_task_avg=0.000141 mcu_task_stddev=0.000340 bytes_write=941 bytes_read=3781 bytes_retransmit=0 bytes_invalid=3 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.011 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868306 heater_bed: target=45 temp=43.5 pwm=0.000 print_time=6.548 buffer_time=0.014 print_stall=0 extruder: target=220 temp=207.2 pwm=0.000
  1119. Stats 614.3: gcodein=44 mcu: mcu_awake=0.025 mcu_task_avg=0.000141 mcu_task_stddev=0.000340 bytes_write=947 bytes_read=3874 bytes_retransmit=0 bytes_invalid=3 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868295 heater_bed: target=45 temp=43.5 pwm=0.000 print_time=6.548 buffer_time=0.000 print_stall=0 extruder: target=220 temp=206.0 pwm=0.000
  1120. Stats 615.3: gcodein=58 mcu: mcu_awake=0.025 mcu_task_avg=0.000141 mcu_task_stddev=0.000340 bytes_write=965 bytes_read=3985 bytes_retransmit=0 bytes_invalid=3 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868265 heater_bed: target=45 temp=43.6 pwm=0.000 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.1 pwm=0.237
  1121. Stats 616.3: gcodein=63 mcu: mcu_awake=0.025 mcu_task_avg=0.000141 mcu_task_stddev=0.000340 bytes_write=1009 bytes_read=4106 bytes_retransmit=0 bytes_invalid=3 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868278 heater_bed: target=45 temp=43.4 pwm=0.000 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=202.0 pwm=1.000
  1122. Stats 617.3: gcodein=68 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000057 bytes_write=1048 bytes_read=4222 bytes_retransmit=0 bytes_invalid=3 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.010 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868283 heater_bed: target=45 temp=43.4 pwm=0.009 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.4 pwm=1.000
  1123. Stats 618.3: gcodein=73 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000057 bytes_write=1078 bytes_read=4338 bytes_retransmit=0 bytes_invalid=3 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=8 stalled_bytes=0 freq=15868286 heater_bed: target=45 temp=43.1 pwm=0.910 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.8 pwm=1.000
  1124. Stats 619.3: gcodein=78 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000057 bytes_write=1135 bytes_read=4466 bytes_retransmit=0 bytes_invalid=3 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868286 heater_bed: target=45 temp=43.3 pwm=0.434 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.3 pwm=1.000
  1125. Stats 620.3: gcodein=83 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000057 bytes_write=1182 bytes_read=4581 bytes_retransmit=0 bytes_invalid=3 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868288 heater_bed: target=45 temp=43.4 pwm=0.506 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=200.4 pwm=1.000
  1126. Stats 621.3: gcodein=88 mcu: mcu_awake=0.007 mcu_task_avg=0.000074 mcu_task_stddev=0.000057 bytes_write=1224 bytes_read=4705 bytes_retransmit=0 bytes_invalid=3 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868287 heater_bed: target=45 temp=43.4 pwm=0.372 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=198.9 pwm=1.000
  1127. Stats 622.3: gcodein=93 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000063 bytes_write=1271 bytes_read=4848 bytes_retransmit=0 bytes_invalid=3 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868279 heater_bed: target=45 temp=43.3 pwm=0.607 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.0 pwm=1.000
  1128. Stats 623.3: gcodein=98 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000063 bytes_write=1303 bytes_read=4958 bytes_retransmit=0 bytes_invalid=3 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.007 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868276 heater_bed: target=45 temp=43.6 pwm=0.197 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=198.8 pwm=1.000
  1129. Stats 624.3: gcodein=103 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000063 bytes_write=1336 bytes_read=5082 bytes_retransmit=0 bytes_invalid=3 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868274 heater_bed: target=45 temp=43.6 pwm=0.047 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.6 pwm=1.000
  1130. Stats 625.3: gcodein=112 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000063 bytes_write=1369 bytes_read=5206 bytes_retransmit=0 bytes_invalid=3 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868272 heater_bed: target=45 temp=43.8 pwm=0.047 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=198.7 pwm=1.000
  1131. Stats 626.3: gcodein=117 mcu: mcu_awake=0.008 mcu_task_avg=0.000082 mcu_task_stddev=0.000063 bytes_write=1416 bytes_read=5321 bytes_retransmit=0 bytes_invalid=3 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.008 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868269 heater_bed: target=45 temp=43.6 pwm=0.160 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=198.8 pwm=1.000
  1132. Stats 627.3: gcodein=122 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=1463 bytes_read=5450 bytes_retransmit=0 bytes_invalid=3 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.007 rttvar=0.005 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868267 heater_bed: target=45 temp=43.5 pwm=0.535 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.0 pwm=1.000
  1133. Stats 628.3: gcodein=127 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=1508 bytes_read=5579 bytes_retransmit=0 bytes_invalid=3 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868267 heater_bed: target=45 temp=44.0 pwm=0.000 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.8 pwm=1.000
  1134. Stats 629.3: gcodein=132 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=1555 bytes_read=5708 bytes_retransmit=0 bytes_invalid=3 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868274 heater_bed: target=45 temp=43.6 pwm=0.289 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=200.8 pwm=1.000
  1135. Stats 630.3: gcodein=137 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=1601 bytes_read=5823 bytes_retransmit=0 bytes_invalid=3 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868272 heater_bed: target=45 temp=43.6 pwm=0.464 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=202.8 pwm=1.000
  1136. Stats 631.3: gcodein=142 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000066 bytes_write=1688 bytes_read=5962 bytes_retransmit=0 bytes_invalid=3 send_seq=177 receive_seq=176 retransmit_seq=0 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868271 heater_bed: target=45 temp=44.0 pwm=0.000 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=202.8 pwm=1.000
  1137. Stats 632.3: gcodein=147 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000062 bytes_write=1748 bytes_read=6110 bytes_retransmit=0 bytes_invalid=3 send_seq=182 receive_seq=181 retransmit_seq=0 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868270 heater_bed: target=45 temp=44.4 pwm=0.000 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=203.9 pwm=1.000
  1138. Stats 633.3: gcodein=152 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000062 bytes_write=1818 bytes_read=6235 bytes_retransmit=0 bytes_invalid=3 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868271 heater_bed: target=45 temp=44.2 pwm=0.000 print_time=8.234 buffer_time=0.000 print_stall=0 extruder: target=220 temp=205.4 pwm=1.000
  1139. Stats 634.3: gcodein=169 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000062 bytes_write=1944 bytes_read=6369 bytes_retransmit=0 bytes_invalid=3 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.008 rttvar=0.005 rto=0.029 ready_bytes=9 stalled_bytes=0 freq=15868273 heater_bed: target=45 temp=43.8 pwm=0.514 print_time=36.305 buffer_time=8.917 print_stall=0 extruder: target=220 temp=208.3 pwm=0.349
  1140. Stats 635.3: gcodein=174 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000062 bytes_write=2032 bytes_read=6513 bytes_retransmit=0 bytes_invalid=3 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868272 heater_bed: target=45 temp=44.5 pwm=0.000 print_time=36.305 buffer_time=7.924 print_stall=0 extruder: target=220 temp=207.7 pwm=0.969
  1141. Stats 636.3: gcodein=179 mcu: mcu_awake=0.009 mcu_task_avg=0.000087 mcu_task_stddev=0.000062 bytes_write=2133 bytes_read=6648 bytes_retransmit=0 bytes_invalid=3 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868273 heater_bed: target=45 temp=44.4 pwm=0.000 print_time=36.305 buffer_time=6.931 print_stall=0 extruder: target=220 temp=210.7 pwm=0.273
  1142. Stats 637.3: gcodein=184 mcu: mcu_awake=0.011 mcu_task_avg=0.000100 mcu_task_stddev=0.000078 bytes_write=2201 bytes_read=6797 bytes_retransmit=0 bytes_invalid=3 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.010 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=0 freq=15868275 heater_bed: target=45 temp=44.4 pwm=0.000 print_time=36.305 buffer_time=5.937 print_stall=0 extruder: target=220 temp=210.7 pwm=0.638
  1143. Stats 638.3: gcodein=189 mcu: mcu_awake=0.011 mcu_task_avg=0.000100 mcu_task_stddev=0.000078 bytes_write=2260 bytes_read=6931 bytes_retransmit=0 bytes_invalid=3 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.009 rttvar=0.006 rto=0.033 ready_bytes=8 stalled_bytes=0 freq=15868275 heater_bed: target=45 temp=44.4 pwm=0.000 print_time=36.305 buffer_time=4.944 print_stall=0 extruder: target=220 temp=213.3 pwm=0.260
  1144. Stats 639.3: gcodein=194 mcu: mcu_awake=0.011 mcu_task_avg=0.000100 mcu_task_stddev=0.000078 bytes_write=2359 bytes_read=7066 bytes_retransmit=0 bytes_invalid=3 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868274 heater_bed: target=45 temp=43.9 pwm=0.944 print_time=36.305 buffer_time=3.951 print_stall=0 extruder: target=220 temp=214.2 pwm=0.268
  1145. Stats 640.3: gcodein=199 mcu: mcu_awake=0.011 mcu_task_avg=0.000100 mcu_task_stddev=0.000078 bytes_write=2419 bytes_read=7186 bytes_retransmit=0 bytes_invalid=3 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868293 heater_bed: target=45 temp=44.5 pwm=0.043 print_time=36.305 buffer_time=2.957 print_stall=0 extruder: target=220 temp=214.2 pwm=0.530
  1146. Heater extruder within range of 220.000
  1147. Stats 641.3: gcodein=204 mcu: mcu_awake=0.011 mcu_task_avg=0.000100 mcu_task_stddev=0.000078 bytes_write=2492 bytes_read=7325 bytes_retransmit=0 bytes_invalid=3 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868291 heater_bed: target=45 temp=44.5 pwm=0.000 print_time=36.305 buffer_time=1.964 print_stall=0 extruder: target=220 temp=214.5 pwm=0.697
  1148. Stats 642.3: gcodein=209 mcu: mcu_awake=0.011 mcu_task_avg=0.000095 mcu_task_stddev=0.000070 bytes_write=2562 bytes_read=7459 bytes_retransmit=0 bytes_invalid=16 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868291 heater_bed: target=45 temp=44.1 pwm=0.603 print_time=36.305 buffer_time=0.971 print_stall=0 extruder: target=220 temp=215.7 pwm=0.626
  1149. Stats 643.3: gcodein=214 mcu: mcu_awake=0.011 mcu_task_avg=0.000095 mcu_task_stddev=0.000070 bytes_write=2608 bytes_read=7574 bytes_retransmit=0 bytes_invalid=16 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868290 heater_bed: target=45 temp=44.5 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.9 pwm=0.430
  1150. Stats 644.3: gcodein=219 mcu: mcu_awake=0.011 mcu_task_avg=0.000095 mcu_task_stddev=0.000070 bytes_write=2681 bytes_read=7713 bytes_retransmit=0 bytes_invalid=16 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=45 temp=44.2 pwm=0.339 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.8 pwm=0.314
  1151. Stats 645.3: gcodein=224 mcu: mcu_awake=0.011 mcu_task_avg=0.000095 mcu_task_stddev=0.000070 bytes_write=2754 bytes_read=7852 bytes_retransmit=0 bytes_invalid=16 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868288 heater_bed: target=45 temp=44.1 pwm=0.622 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.000
  1152. Stats 646.3: gcodein=229 mcu: mcu_awake=0.011 mcu_task_avg=0.000095 mcu_task_stddev=0.000070 bytes_write=2823 bytes_read=7972 bytes_retransmit=0 bytes_invalid=16 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=45 temp=44.2 pwm=0.616 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.7 pwm=0.629
  1153. Stats 647.3: gcodein=234 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=2868 bytes_read=8101 bytes_retransmit=0 bytes_invalid=29 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=45 temp=44.7 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.9 pwm=0.368
  1154. Stats 648.3: gcodein=239 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=2955 bytes_read=8245 bytes_retransmit=0 bytes_invalid=29 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=45 temp=44.6 pwm=0.087 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.9 pwm=0.529
  1155. Stats 649.3: gcodein=244 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=3014 bytes_read=8365 bytes_retransmit=0 bytes_invalid=29 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.009 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868288 heater_bed: target=45 temp=44.3 pwm=0.712 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.9 pwm=0.000
  1156. Stats 650.3: gcodein=249 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=3059 bytes_read=8494 bytes_retransmit=0 bytes_invalid=29 send_seq=282 receive_seq=282 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=45 temp=44.9 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.000
  1157. Stats 651.3: gcodein=254 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=3117 bytes_read=8628 bytes_retransmit=0 bytes_invalid=29 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868289 heater_bed: target=45 temp=44.9 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.5 pwm=0.212
  1158. Stats 652.3: gcodein=259 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=3178 bytes_read=8748 bytes_retransmit=0 bytes_invalid=29 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868291 heater_bed: target=45 temp=44.6 pwm=0.536 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.000
  1159. Stats 653.3: gcodein=264 mcu: mcu_awake=0.010 mcu_task_avg=0.000087 mcu_task_stddev=0.000064 bytes_write=3238 bytes_read=8896 bytes_retransmit=0 bytes_invalid=29 send_seq=297 receive_seq=297 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=9 stalled_bytes=0 freq=15868291 heater_bed: target=45 temp=44.6 pwm=0.604 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.9 pwm=0.040
  1160. Stats 654.3: gcodein=269 mcu: mcu_awake=0.010 mcu_task_avg=0.000087 mcu_task_stddev=0.000064 bytes_write=3325 bytes_read=9040 bytes_retransmit=0 bytes_invalid=29 send_seq=304 receive_seq=304 retransmit_seq=0 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868291 heater_bed: target=45 temp=44.8 pwm=0.187 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.1 pwm=0.289
  1161. Stats 655.3: gcodein=274 mcu: mcu_awake=0.010 mcu_task_avg=0.000087 mcu_task_stddev=0.000064 bytes_write=3424 bytes_read=9175 bytes_retransmit=0 bytes_invalid=29 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868293 heater_bed: target=45 temp=44.9 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.663
  1162. Stats 656.3: gcodein=279 mcu: mcu_awake=0.010 mcu_task_avg=0.000087 mcu_task_stddev=0.000064 bytes_write=3483 bytes_read=9295 bytes_retransmit=0 bytes_invalid=29 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868294 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.437
  1163. Stats 657.3: gcodein=284 mcu: mcu_awake=0.010 mcu_task_avg=0.000087 mcu_task_stddev=0.000064 bytes_write=3529 bytes_read=9424 bytes_retransmit=0 bytes_invalid=29 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.007 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868296 heater_bed: target=45 temp=44.9 pwm=0.058 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.458
  1164. Stats 658.3: gcodein=289 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000065 bytes_write=3589 bytes_read=9572 bytes_retransmit=0 bytes_invalid=29 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868298 heater_bed: target=45 temp=45.1 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.534
  1165. Stats 659.3: gcodein=294 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000065 bytes_write=3649 bytes_read=9692 bytes_retransmit=0 bytes_invalid=29 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868299 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.541
  1166. Stats 660.3: gcodein=299 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000065 bytes_write=3696 bytes_read=9821 bytes_retransmit=0 bytes_invalid=29 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868301 heater_bed: target=45 temp=44.9 pwm=0.217 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.542
  1167. Stats 661.3: gcodein=304 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000065 bytes_write=3748 bytes_read=9950 bytes_retransmit=0 bytes_invalid=29 send_seq=340 receive_seq=339 retransmit_seq=0 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868304 heater_bed: target=45 temp=45.0 pwm=0.038 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.502
  1168. Stats 662.4: gcodein=309 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000065 bytes_write=3822 bytes_read=10091 bytes_retransmit=0 bytes_invalid=29 send_seq=346 receive_seq=346 retransmit_seq=0 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868308 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.448
  1169. Stats 663.4: gcodein=314 mcu: mcu_awake=0.010 mcu_task_avg=0.000088 mcu_task_stddev=0.000063 bytes_write=3890 bytes_read=10239 bytes_retransmit=0 bytes_invalid=29 send_seq=351 receive_seq=351 retransmit_seq=0 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868310 heater_bed: target=45 temp=45.1 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.452
  1170. Stats 664.4: gcodein=319 mcu: mcu_awake=0.010 mcu_task_avg=0.000088 mcu_task_stddev=0.000063 bytes_write=3910 bytes_read=10358 bytes_retransmit=0 bytes_invalid=29 send_seq=353 receive_seq=353 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868313 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.534
  1171. Stats 665.4: gcodein=324 mcu: mcu_awake=0.010 mcu_task_avg=0.000088 mcu_task_stddev=0.000063 bytes_write=3958 bytes_read=10473 bytes_retransmit=0 bytes_invalid=29 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868314 heater_bed: target=45 temp=45.1 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.518
  1172. Stats 666.4: gcodein=329 mcu: mcu_awake=0.010 mcu_task_avg=0.000088 mcu_task_stddev=0.000063 bytes_write=4017 bytes_read=10607 bytes_retransmit=0 bytes_invalid=29 send_seq=362 receive_seq=362 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868317 heater_bed: target=45 temp=45.0 pwm=0.124 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.551
  1173. Stats 667.4: gcodein=334 mcu: mcu_awake=0.010 mcu_task_avg=0.000088 mcu_task_stddev=0.000063 bytes_write=4071 bytes_read=10736 bytes_retransmit=0 bytes_invalid=29 send_seq=366 receive_seq=366 retransmit_seq=0 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868320 heater_bed: target=45 temp=45.0 pwm=0.212 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.509
  1174. Stats 668.4: gcodein=339 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=4153 bytes_read=10875 bytes_retransmit=0 bytes_invalid=29 send_seq=372 receive_seq=372 retransmit_seq=0 srtt=0.011 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868323 heater_bed: target=45 temp=45.0 pwm=0.127 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.387
  1175. Stats 669.4: gcodein=344 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=4199 bytes_read=10990 bytes_retransmit=0 bytes_invalid=29 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.009 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868325 heater_bed: target=45 temp=44.9 pwm=0.266 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.460
  1176. Stats 670.4: gcodein=349 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=4271 bytes_read=11143 bytes_retransmit=0 bytes_invalid=29 send_seq=382 receive_seq=382 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868328 heater_bed: target=45 temp=44.9 pwm=0.228 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.324
  1177. Stats 671.4: gcodein=354 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=4325 bytes_read=11258 bytes_retransmit=0 bytes_invalid=29 send_seq=386 receive_seq=386 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868331 heater_bed: target=45 temp=45.0 pwm=0.097 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.505
  1178. Stats 672.4: gcodein=359 mcu: mcu_awake=0.009 mcu_task_avg=0.000088 mcu_task_stddev=0.000067 bytes_write=4379 bytes_read=11373 bytes_retransmit=0 bytes_invalid=29 send_seq=390 receive_seq=390 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868334 heater_bed: target=45 temp=45.0 pwm=0.142 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.313
  1179. Stats 673.4: gcodein=364 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000067 bytes_write=4452 bytes_read=11526 bytes_retransmit=0 bytes_invalid=29 send_seq=396 receive_seq=396 retransmit_seq=0 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868337 heater_bed: target=45 temp=45.0 pwm=0.167 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.375
  1180. Stats 674.4: gcodein=369 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000067 bytes_write=4471 bytes_read=11645 bytes_retransmit=0 bytes_invalid=29 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868340 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.375
  1181. Stats 675.4: gcodein=374 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000067 bytes_write=4552 bytes_read=11770 bytes_retransmit=0 bytes_invalid=29 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868344 heater_bed: target=45 temp=45.0 pwm=0.137 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.311
  1182. Stats 676.4: gcodein=379 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000067 bytes_write=4620 bytes_read=11904 bytes_retransmit=0 bytes_invalid=29 send_seq=409 receive_seq=409 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=8 stalled_bytes=0 freq=15868348 heater_bed: target=45 temp=45.0 pwm=0.044 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.411
  1183. Stats 677.4: gcodein=384 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000067 bytes_write=4665 bytes_read=12033 bytes_retransmit=0 bytes_invalid=29 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.008 rttvar=0.006 rto=0.034 ready_bytes=9 stalled_bytes=0 freq=15868350 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.533
  1184. Stats 678.4: gcodein=389 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=4725 bytes_read=12167 bytes_retransmit=0 bytes_invalid=29 send_seq=418 receive_seq=418 retransmit_seq=0 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868353 heater_bed: target=45 temp=45.0 pwm=0.159 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.315
  1185. Stats 679.4: gcodein=394 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=4806 bytes_read=12306 bytes_retransmit=0 bytes_invalid=29 send_seq=424 receive_seq=424 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868356 heater_bed: target=45 temp=45.1 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.409
  1186. Stats 680.4: gcodein=399 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=4860 bytes_read=12435 bytes_retransmit=0 bytes_invalid=29 send_seq=428 receive_seq=428 retransmit_seq=0 srtt=0.008 rttvar=0.006 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868360 heater_bed: target=45 temp=44.9 pwm=0.221 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.372
  1187. Stats 681.4: gcodein=404 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=4906 bytes_read=12550 bytes_retransmit=0 bytes_invalid=29 send_seq=432 receive_seq=432 retransmit_seq=0 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868362 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.540
  1188. Stats 682.4: gcodein=409 mcu: mcu_awake=0.010 mcu_task_avg=0.000091 mcu_task_stddev=0.000069 bytes_write=4992 bytes_read=12694 bytes_retransmit=0 bytes_invalid=29 send_seq=439 receive_seq=439 retransmit_seq=0 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868365 heater_bed: target=45 temp=45.0 pwm=0.000 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.535
  1189. Stats 683.4: gcodein=414 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000067 bytes_write=5065 bytes_read=12833 bytes_retransmit=0 bytes_invalid=29 send_seq=445 receive_seq=445 retransmit_seq=0 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868368 heater_bed: target=45 temp=45.0 pwm=0.050 print_time=36.305 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.519
  1190. Stats 684.4: gcodein=427 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000067 bytes_write=5126 bytes_read=12962 bytes_retransmit=0 bytes_invalid=29 send_seq=449 receive_seq=449 retransmit_seq=0 srtt=0.009 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868372 heater_bed: target=0 temp=44.9 pwm=0.000 print_time=77.543 buffer_time=0.503 print_stall=0 extruder: target=0 temp=219.8 pwm=0.000
  1191. Restarting printer
  1192. Start printer at Sat May 11 23:24:23 2019 (1557613463.2 686.0)
  1193. ===== Config file =====
  1194. [stepper_x]
  1195. step_pin = ar54
  1196. dir_pin = ar55
  1197. enable_pin = !ar38
  1198. step_distance = .0125
  1199. endstop_pin = ^!ar2
  1200. position_endstop = 0
  1201. position_max = 220
  1202. homing_speed = 50
  1203.  
  1204. [stepper_y]
  1205. step_pin = ar60
  1206. dir_pin = !ar61
  1207. enable_pin = !ar56
  1208. step_distance = .0125
  1209. endstop_pin = ^!ar15
  1210. position_endstop = 200
  1211. position_max = 200
  1212. homing_speed = 50
  1213.  
  1214. [stepper_z]
  1215. step_pin = ar46
  1216. dir_pin = ar48
  1217. enable_pin = !ar62
  1218. step_distance = .0025
  1219. endstop_pin = ^!ar19
  1220. position_endstop = 0.5
  1221. position_max = 220
  1222. homing_speed = 15
  1223.  
  1224. [extruder]
  1225. step_pin = ar26
  1226. dir_pin = ar28
  1227. enable_pin = !ar24
  1228. step_distance = 0.010526
  1229. nozzle_diameter = 0.300
  1230. filament_diameter = 1.70
  1231. heater_pin = ar10
  1232. sensor_type = EPCOS 100K B57560G104F
  1233. sensor_pin = analog14
  1234. control = pid
  1235. pid_kp = 22.2
  1236. pid_ki = 1.08
  1237. pid_kd = 114
  1238. min_temp = 0
  1239. max_temp = 250
  1240.  
  1241. [verify_heater extruder]
  1242. heating_gain = 2
  1243. check_gain_time = 25
  1244. hysteresis = 7.5
  1245. max_error = 240
  1246.  
  1247. [heater_bed]
  1248. heater_pin = ar8
  1249. sensor_type = EPCOS 100K B57560G104F
  1250. sensor_pin = analog13
  1251. control = pid
  1252. pid_kp = 54.027
  1253. pid_ki = 0.770
  1254. pid_kd = 948.182
  1255. min_temp = 0
  1256. max_temp = 130
  1257.  
  1258. [fan]
  1259. pin = ar9
  1260. max_power = 1.0
  1261. cycle_time = 0.05
  1262. kick_start_time = 0.1
  1263.  
  1264. [mcu]
  1265. serial = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A506DEP7-if00-port0
  1266. pin_map = arduino
  1267. baud = 250000
  1268.  
  1269. [printer]
  1270. kinematics = cartesian
  1271. max_velocity = 300
  1272. max_accel = 3000
  1273. max_z_velocity = 20
  1274. max_z_accel = 1000
  1275. max_accel_to_decel = 2500
  1276. square_corner_velocity = 5
  1277.  
  1278. [homing_override]
  1279. set_position_z = 5
  1280. gcode = G1 Z10 F500
  1281. G28
  1282. axes = z
  1283.  
  1284. [virtual_sdcard]
  1285. path = ~/.octoprint/uploads/
  1286.  
  1287. [force_move]
  1288. enable_force_move = True
  1289. =======================
  1290. Extruder max_extrude_ratio=0.158604
  1291. Starting serial connect
  1292. got {'#receive_time': 687.213470623, u'next_clock': 1282240000, u'oid': 4, u'value': 7378, '#name': u'analog_in_state', '#sent_time': 687.165800206}
  1293. got {'#receive_time': 687.2921484870001, u'next_clock': 1283680000, u'oid': 13, u'value': 613, '#name': u'analog_in_state', '#sent_time': 687.245796873}
  1294. got {'#receive_time': 687.5164180710001, u'next_clock': 1287040000, u'oid': 4, u'value': 7376, '#name': u'analog_in_state', '#sent_time': 687.500515987}
  1295. got {'#receive_time': 687.5957774980001, u'next_clock': 1288480000, u'oid': 13, u'value': 611, '#name': u'analog_in_state', '#sent_time': 687.551514268}
  1296. Loaded MCU 'mcu' 77 commands (v0.7.0-457-g777013d-20190511_224917-octopi / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125)
  1297. MCU 'mcu' config: RECEIVE_WINDOW=192 BUS_PINS_spi=PB3,PB2,PB1 SOFT_PWM_MAX=256 SERIAL_BAUD=250000 STEP_DELAY=-1 ADC_MAX=1023 PWM_MAX=255 RESERVE_PINS_serial=PE0,PE1 BUS_PINS_twi=PD0,PD1 MCU=atmega2560 STATS_SUMSQ_BASE=256 CLOCK_FREQ=16000000
  1298. Configured MCU 'CLOCK_FREQ' (634 moves)
  1299. Starting heater checks for extruder
  1300. Starting heater checks for heater_bed
  1301. Stats 687.8: gcodein=5 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=731 bytes_read=3438 bytes_retransmit=19 bytes_invalid=0 send_seq=82 receive_seq=71 retransmit_seq=49 srtt=0.011 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=3 freq=15867783 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=80.663 buffer_time=0.249 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
  1302. Stats 688.8: gcodein=5 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=745 bytes_read=3498 bytes_retransmit=26 bytes_invalid=0 send_seq=84 receive_seq=83 retransmit_seq=84 srtt=0.011 rttvar=0.005 rto=0.058 ready_bytes=0 stalled_bytes=0 freq=15867783 heater_bed: target=0 temp=0.0 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
  1303. Stats 689.8: gcodein=5 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=751 bytes_read=3603 bytes_retransmit=40 bytes_invalid=0 send_seq=85 receive_seq=85 retransmit_seq=84 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868448 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.2 pwm=0.000
  1304. Stats 690.8: gcodein=10 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=757 bytes_read=3689 bytes_retransmit=40 bytes_invalid=0 send_seq=86 receive_seq=86 retransmit_seq=84 srtt=0.010 rttvar=0.005 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868484 heater_bed: target=0 temp=44.9 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.8 pwm=0.000
  1305. Stats 691.8: gcodein=10 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=763 bytes_read=3789 bytes_retransmit=40 bytes_invalid=0 send_seq=87 receive_seq=87 retransmit_seq=84 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868517 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.1 pwm=0.000
  1306. Stats 692.8: gcodein=10 mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=769 bytes_read=3903 bytes_retransmit=40 bytes_invalid=0 send_seq=88 receive_seq=88 retransmit_seq=84 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868546 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.8 pwm=0.000
  1307. Stats 693.8: gcodein=10 mcu: mcu_awake=0.007 mcu_task_avg=0.000070 mcu_task_stddev=0.000060 bytes_write=775 bytes_read=4017 bytes_retransmit=40 bytes_invalid=0 send_seq=89 receive_seq=89 retransmit_seq=84 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868555 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.5 pwm=0.000
  1308. Stats 694.8: gcodein=10 mcu: mcu_awake=0.007 mcu_task_avg=0.000070 mcu_task_stddev=0.000060 bytes_write=781 bytes_read=4131 bytes_retransmit=40 bytes_invalid=0 send_seq=90 receive_seq=90 retransmit_seq=84 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868563 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=216.6 pwm=0.000
  1309. Stats 695.8: gcodein=15 mcu: mcu_awake=0.007 mcu_task_avg=0.000070 mcu_task_stddev=0.000060 bytes_write=787 bytes_read=4234 bytes_retransmit=40 bytes_invalid=3 send_seq=91 receive_seq=91 retransmit_seq=84 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868563 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=215.9 pwm=0.000
  1310. Stats 696.8: gcodein=15 mcu: mcu_awake=0.007 mcu_task_avg=0.000070 mcu_task_stddev=0.000060 bytes_write=793 bytes_read=4334 bytes_retransmit=40 bytes_invalid=3 send_seq=92 receive_seq=92 retransmit_seq=84 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868572 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=214.9 pwm=0.000
  1311. Stats 697.8: gcodein=15 mcu: mcu_awake=0.007 mcu_task_avg=0.000070 mcu_task_stddev=0.000060 bytes_write=799 bytes_read=4434 bytes_retransmit=40 bytes_invalid=3 send_seq=93 receive_seq=93 retransmit_seq=84 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868578 heater_bed: target=0 temp=44.6 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=214.1 pwm=0.000
  1312. Stats 698.8: gcodein=15 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=805 bytes_read=4561 bytes_retransmit=40 bytes_invalid=3 send_seq=94 receive_seq=94 retransmit_seq=84 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868580 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.2 pwm=0.000
  1313. Stats 699.8: gcodein=15 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=811 bytes_read=4675 bytes_retransmit=40 bytes_invalid=3 send_seq=95 receive_seq=95 retransmit_seq=84 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868583 heater_bed: target=0 temp=44.6 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=212.3 pwm=0.000
  1314. Stats 700.8: gcodein=20 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=817 bytes_read=4775 bytes_retransmit=40 bytes_invalid=3 send_seq=96 receive_seq=96 retransmit_seq=84 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868587 heater_bed: target=0 temp=44.7 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.4 pwm=0.000
  1315. Stats 701.8: gcodein=20 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=823 bytes_read=4889 bytes_retransmit=40 bytes_invalid=3 send_seq=97 receive_seq=97 retransmit_seq=84 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868589 heater_bed: target=0 temp=44.6 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.4 pwm=0.000
  1316. Stats 702.8: gcodein=20 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=829 bytes_read=5003 bytes_retransmit=40 bytes_invalid=3 send_seq=98 receive_seq=98 retransmit_seq=84 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868591 heater_bed: target=0 temp=44.6 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.0 pwm=0.000
  1317. Stats 703.8: gcodein=20 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=835 bytes_read=5116 bytes_retransmit=40 bytes_invalid=3 send_seq=99 receive_seq=99 retransmit_seq=84 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868594 heater_bed: target=0 temp=44.6 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.2 pwm=0.000
  1318. Stats 704.8: gcodein=20 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=841 bytes_read=5216 bytes_retransmit=40 bytes_invalid=16 send_seq=100 receive_seq=100 retransmit_seq=84 srtt=0.008 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868599 heater_bed: target=0 temp=44.5 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.4 pwm=0.000
  1319. Stats 705.8: gcodein=25 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=847 bytes_read=5330 bytes_retransmit=40 bytes_invalid=16 send_seq=101 receive_seq=101 retransmit_seq=84 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868601 heater_bed: target=0 temp=44.4 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.4 pwm=0.000
  1320. Stats 706.8: gcodein=25 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=853 bytes_read=5430 bytes_retransmit=40 bytes_invalid=16 send_seq=102 receive_seq=102 retransmit_seq=84 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868604 heater_bed: target=0 temp=44.5 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.1 pwm=0.000
  1321. Stats 707.8: gcodein=25 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=859 bytes_read=5519 bytes_retransmit=54 bytes_invalid=16 send_seq=103 receive_seq=103 retransmit_seq=103 srtt=0.009 rttvar=0.004 rto=0.101 ready_bytes=0 stalled_bytes=0 freq=15868604 heater_bed: target=0 temp=44.4 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=204.2 pwm=0.000
  1322. Stats 708.8: gcodein=25 mcu: mcu_awake=0.007 mcu_task_avg=0.000073 mcu_task_stddev=0.000060 bytes_write=865 bytes_read=5647 bytes_retransmit=54 bytes_invalid=16 send_seq=104 receive_seq=104 retransmit_seq=103 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868607 heater_bed: target=0 temp=44.3 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.7 pwm=0.000
  1323. Stats 709.8: gcodein=25 mcu: mcu_awake=0.007 mcu_task_avg=0.000073 mcu_task_stddev=0.000060 bytes_write=871 bytes_read=5747 bytes_retransmit=54 bytes_invalid=16 send_seq=105 receive_seq=105 retransmit_seq=103 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868610 heater_bed: target=0 temp=44.2 pwm=0.000 print_time=80.663 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.5 pwm=0.000
  1324. Stats 710.8: gcodein=34 mcu: mcu_awake=0.007 mcu_task_avg=0.000073 mcu_task_stddev=0.000060 bytes_write=1056 bytes_read=5838 bytes_retransmit=429 bytes_invalid=16 send_seq=109 receive_seq=107 retransmit_seq=109 srtt=0.009 rttvar=0.005 rto=0.226 ready_bytes=21 stalled_bytes=0 freq=15868614 heater_bed: target=0 temp=44.2 pwm=0.000 print_time=103.872 buffer_time=0.628 print_stall=0 extruder: target=0 temp=200.5 pwm=0.000
  1325. Stats 711.8: gcodein=34 mcu: mcu_awake=0.007 mcu_task_avg=0.000073 mcu_task_stddev=0.000060 bytes_write=1088 bytes_read=5918 bytes_retransmit=443 bytes_invalid=22 send_seq=111 receive_seq=111 retransmit_seq=111 srtt=0.010 rttvar=0.005 rto=0.120 ready_bytes=0 stalled_bytes=0 freq=15868614 heater_bed: target=0 temp=44.2 pwm=0.000 print_time=103.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.6 pwm=0.000
  1326. Stats 712.8: gcodein=34 mcu: mcu_awake=0.007 mcu_task_avg=0.000073 mcu_task_stddev=0.000060 bytes_write=1101 bytes_read=6023 bytes_retransmit=459 bytes_invalid=22 send_seq=113 receive_seq=113 retransmit_seq=113 srtt=0.009 rttvar=0.006 rto=0.132 ready_bytes=0 stalled_bytes=0 freq=15868617 heater_bed: target=0 temp=44.2 pwm=0.000 print_time=103.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.6 pwm=0.000
  1327. Stats 713.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000087 bytes_write=1114 bytes_read=6129 bytes_retransmit=459 bytes_invalid=27 send_seq=115 receive_seq=115 retransmit_seq=113 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868621 heater_bed: target=0 temp=44.1 pwm=0.000 print_time=103.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.2 pwm=0.000
  1328. Stats 714.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000087 bytes_write=1127 bytes_read=6227 bytes_retransmit=473 bytes_invalid=27 send_seq=117 receive_seq=117 retransmit_seq=116 srtt=0.014 rttvar=0.014 rto=0.068 ready_bytes=0 stalled_bytes=0 freq=15868621 heater_bed: target=0 temp=44.1 pwm=0.000 print_time=103.872 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.2 pwm=0.000
  1329. Stats 715.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000087 bytes_write=1330 bytes_read=6357 bytes_retransmit=603 bytes_invalid=36 send_seq=123 receive_seq=123 retransmit_seq=122 srtt=0.012 rttvar=0.007 rto=0.041 ready_bytes=0 stalled_bytes=0 freq=15868626 heater_bed: target=0 temp=44.2 pwm=0.000 print_time=108.330 buffer_time=0.124 print_stall=0 extruder: target=0 temp=194.8 pwm=0.000
  1330. Stats 716.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000087 bytes_write=1350 bytes_read=6432 bytes_retransmit=633 bytes_invalid=36 send_seq=126 receive_seq=125 retransmit_seq=125 srtt=0.012 rttvar=0.007 rto=0.326 ready_bytes=0 stalled_bytes=0 freq=15868626 heater_bed: target=0 temp=44.1 pwm=0.000 print_time=108.330 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.9 pwm=0.000
  1331. Stats 717.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000091 mcu_task_stddev=0.000087 bytes_write=1696 bytes_read=6545 bytes_retransmit=633 bytes_invalid=43 send_seq=137 receive_seq=137 retransmit_seq=125 srtt=0.025 rttvar=0.037 rto=0.172 ready_bytes=0 stalled_bytes=0 freq=15868626 heater_bed: target=0 temp=44.0 pwm=0.000 print_time=110.355 buffer_time=0.163 print_stall=0 extruder: target=0 temp=192.9 pwm=0.000
  1332. Stats 718.8: gcodein=34 mcu: mcu_awake=0.014 mcu_task_avg=0.000097 mcu_task_stddev=0.000104 bytes_write=1716 bytes_read=6611 bytes_retransmit=647 bytes_invalid=54 send_seq=140 receive_seq=139 retransmit_seq=139 srtt=0.025 rttvar=0.037 rto=0.345 ready_bytes=0 stalled_bytes=0 freq=15868626 heater_bed: target=0 temp=44.0 pwm=0.000 print_time=110.355 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.5 pwm=0.000
  1333. Stats 719.8: gcodein=34 mcu: mcu_awake=0.014 mcu_task_avg=0.000097 mcu_task_stddev=0.000104 bytes_write=1881 bytes_read=6706 bytes_retransmit=655 bytes_invalid=61 send_seq=148 receive_seq=145 retransmit_seq=140 srtt=0.018 rttvar=0.022 rto=0.106 ready_bytes=0 stalled_bytes=0 freq=15868632 heater_bed: target=0 temp=44.0 pwm=0.000 print_time=112.433 buffer_time=0.233 print_stall=0 extruder: target=0 temp=190.6 pwm=0.000
  1334. Stats 720.8: gcodein=34 mcu: mcu_awake=0.014 mcu_task_avg=0.000097 mcu_task_stddev=0.000104 bytes_write=2074 bytes_read=6878 bytes_retransmit=655 bytes_invalid=61 send_seq=154 receive_seq=154 retransmit_seq=140 srtt=0.014 rttvar=0.012 rto=0.061 ready_bytes=35 stalled_bytes=0 freq=15868638 heater_bed: target=0 temp=44.0 pwm=0.000 print_time=113.446 buffer_time=0.253 print_stall=0 extruder: target=0 temp=189.9 pwm=0.000
  1335. Stats 721.8: gcodein=34 mcu: mcu_awake=0.014 mcu_task_avg=0.000097 mcu_task_stddev=0.000104 bytes_write=2127 bytes_read=7020 bytes_retransmit=655 bytes_invalid=61 send_seq=157 receive_seq=157 retransmit_seq=140 srtt=0.012 rttvar=0.008 rto=0.042 ready_bytes=0 stalled_bytes=0 freq=15868645 heater_bed: target=0 temp=43.9 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.8 pwm=0.000
  1336. Stats 722.8: gcodein=34 mcu: mcu_awake=0.014 mcu_task_avg=0.000097 mcu_task_stddev=0.000104 bytes_write=2141 bytes_read=7125 bytes_retransmit=655 bytes_invalid=61 send_seq=159 receive_seq=159 retransmit_seq=140 srtt=0.010 rttvar=0.007 rto=0.039 ready_bytes=0 stalled_bytes=0 freq=15868650 heater_bed: target=0 temp=44.0 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.6 pwm=0.000
  1337. Stats 723.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000097 mcu_task_stddev=0.000100 bytes_write=2147 bytes_read=7254 bytes_retransmit=655 bytes_invalid=61 send_seq=160 receive_seq=160 retransmit_seq=140 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=0 stalled_bytes=0 freq=15868654 heater_bed: target=0 temp=43.8 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.7 pwm=0.000
  1338. Stats 724.8: gcodein=34 mcu: mcu_awake=0.011 mcu_task_avg=0.000097 mcu_task_stddev=0.000100 bytes_write=2153 bytes_read=7368 bytes_retransmit=655 bytes_invalid=61 send_seq=161 receive_seq=161 retransmit_seq=140 srtt=0.009 rttvar=0.006 rto=0.035 ready_bytes=0 stalled_bytes=0 freq=15868658 heater_bed: target=0 temp=43.8 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.5 pwm=0.000
  1339. Stats 725.8: gcodein=39 mcu: mcu_awake=0.011 mcu_task_avg=0.000097 mcu_task_stddev=0.000100 bytes_write=2159 bytes_read=7468 bytes_retransmit=655 bytes_invalid=61 send_seq=162 receive_seq=162 retransmit_seq=140 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868662 heater_bed: target=0 temp=43.7 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.6 pwm=0.000
  1340. Stats 726.8: gcodein=39 mcu: mcu_awake=0.011 mcu_task_avg=0.000097 mcu_task_stddev=0.000100 bytes_write=2165 bytes_read=7582 bytes_retransmit=655 bytes_invalid=61 send_seq=163 receive_seq=163 retransmit_seq=140 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868666 heater_bed: target=0 temp=43.7 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.6 pwm=0.000
  1341. Stats 727.8: gcodein=39 mcu: mcu_awake=0.011 mcu_task_avg=0.000097 mcu_task_stddev=0.000100 bytes_write=2171 bytes_read=7682 bytes_retransmit=655 bytes_invalid=61 send_seq=164 receive_seq=164 retransmit_seq=140 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868669 heater_bed: target=0 temp=43.7 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.8 pwm=0.000
  1342. Unknown command:"M22"
  1343. Stats 728.8: gcodein=43 mcu: mcu_awake=0.011 mcu_task_avg=0.000097 mcu_task_stddev=0.000100 bytes_write=2177 bytes_read=7796 bytes_retransmit=655 bytes_invalid=61 send_seq=165 receive_seq=165 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868673 heater_bed: target=0 temp=43.6 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.3 pwm=0.000
  1344. Stats 729.8: gcodein=43 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=2183 bytes_read=7909 bytes_retransmit=655 bytes_invalid=61 send_seq=166 receive_seq=166 retransmit_seq=140 srtt=0.008 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868675 heater_bed: target=0 temp=43.8 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.5 pwm=0.000
  1345. Stats 730.8: gcodein=56 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=2189 bytes_read=8023 bytes_retransmit=655 bytes_invalid=61 send_seq=167 receive_seq=167 retransmit_seq=140 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868679 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.5 pwm=0.000
  1346. Stats 731.8: gcodein=56 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=2195 bytes_read=8137 bytes_retransmit=655 bytes_invalid=61 send_seq=168 receive_seq=168 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868682 heater_bed: target=0 temp=43.6 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.0 pwm=0.000
  1347. Stats 732.8: gcodein=56 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=2201 bytes_read=8237 bytes_retransmit=655 bytes_invalid=61 send_seq=169 receive_seq=169 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868686 heater_bed: target=0 temp=43.4 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.3 pwm=0.000
  1348. Stats 733.8: gcodein=56 mcu: mcu_awake=0.007 mcu_task_avg=0.000075 mcu_task_stddev=0.000063 bytes_write=2207 bytes_read=8351 bytes_retransmit=655 bytes_invalid=61 send_seq=170 receive_seq=170 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868689 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.4 pwm=0.000
  1349. Stats 734.8: gcodein=87 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=2213 bytes_read=8478 bytes_retransmit=655 bytes_invalid=61 send_seq=171 receive_seq=171 retransmit_seq=140 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868693 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.3 pwm=0.000
  1350. Stats 735.8: gcodein=96 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=2219 bytes_read=8578 bytes_retransmit=655 bytes_invalid=61 send_seq=172 receive_seq=172 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868696 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.5 pwm=0.000
  1351. Stats 736.9: gcodein=100 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=2225 bytes_read=8692 bytes_retransmit=655 bytes_invalid=61 send_seq=173 receive_seq=173 retransmit_seq=140 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868700 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.3 pwm=0.000
  1352. Stats 737.9: gcodein=104 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=2231 bytes_read=8806 bytes_retransmit=655 bytes_invalid=61 send_seq=174 receive_seq=174 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868704 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=113.446 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.2 pwm=0.000
  1353. Stats 738.9: gcodein=118 mcu: mcu_awake=0.007 mcu_task_avg=0.000077 mcu_task_stddev=0.000064 bytes_write=2251 bytes_read=8911 bytes_retransmit=655 bytes_invalid=61 send_seq=176 receive_seq=176 retransmit_seq=140 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868708 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=130.465 buffer_time=0.000 print_stall=0 extruder: target=220 temp=171.3 pwm=1.000
  1354. Heater extruder approaching new target of 220.000
  1355. Stats 739.9: gcodein=122 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=2257 bytes_read=9038 bytes_retransmit=655 bytes_invalid=61 send_seq=177 receive_seq=177 retransmit_seq=140 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868711 heater_bed: target=0 temp=43.5 pwm=0.000 print_time=130.465 buffer_time=0.000 print_stall=0 extruder: target=220 temp=170.3 pwm=1.000
  1356. Stats 740.9: gcodein=140 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=2290 bytes_read=9162 bytes_retransmit=655 bytes_invalid=61 send_seq=180 receive_seq=180 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868715 heater_bed: target=45 temp=43.5 pwm=0.064 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=169.4 pwm=1.000
  1357. Stats 741.9: gcodein=149 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=2323 bytes_read=9272 bytes_retransmit=655 bytes_invalid=61 send_seq=183 receive_seq=183 retransmit_seq=140 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868718 heater_bed: target=45 temp=43.0 pwm=1.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.7 pwm=1.000
  1358. Stats 742.9: gcodein=158 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=2398 bytes_read=9406 bytes_retransmit=655 bytes_invalid=61 send_seq=189 receive_seq=188 retransmit_seq=140 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868722 heater_bed: target=45 temp=43.4 pwm=0.227 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.4 pwm=1.000
  1359. Stats 743.9: gcodein=167 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000061 bytes_write=2444 bytes_read=9537 bytes_retransmit=655 bytes_invalid=61 send_seq=193 receive_seq=193 retransmit_seq=140 srtt=0.009 rttvar=0.006 rto=0.034 ready_bytes=0 stalled_bytes=0 freq=15868729 heater_bed: target=45 temp=43.1 pwm=0.798 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.1 pwm=1.000
  1360. Stats 744.9: gcodein=176 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000065 bytes_write=2490 bytes_read=9680 bytes_retransmit=655 bytes_invalid=61 send_seq=197 receive_seq=197 retransmit_seq=140 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868732 heater_bed: target=45 temp=43.3 pwm=0.525 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=167.8 pwm=1.000
  1361. Stats 745.9: gcodein=185 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000065 bytes_write=2524 bytes_read=9790 bytes_retransmit=655 bytes_invalid=61 send_seq=200 receive_seq=200 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868735 heater_bed: target=45 temp=43.3 pwm=0.471 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.0 pwm=1.000
  1362. Stats 746.9: gcodein=194 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000065 bytes_write=2579 bytes_read=9919 bytes_retransmit=655 bytes_invalid=61 send_seq=204 receive_seq=204 retransmit_seq=140 srtt=0.008 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868738 heater_bed: target=45 temp=43.4 pwm=0.199 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.2 pwm=1.000
  1363. Stats 747.9: gcodein=203 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000065 bytes_write=2625 bytes_read=10048 bytes_retransmit=655 bytes_invalid=61 send_seq=208 receive_seq=208 retransmit_seq=140 srtt=0.006 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868741 heater_bed: target=45 temp=43.4 pwm=0.340 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=168.6 pwm=1.000
  1364. Stats 748.9: gcodein=212 mcu: mcu_awake=0.008 mcu_task_avg=0.000084 mcu_task_stddev=0.000065 bytes_write=2671 bytes_read=10163 bytes_retransmit=655 bytes_invalid=61 send_seq=212 receive_seq=212 retransmit_seq=140 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868744 heater_bed: target=45 temp=43.4 pwm=0.233 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=169.1 pwm=1.000
  1365. Stats 749.9: gcodein=221 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=2704 bytes_read=10301 bytes_retransmit=655 bytes_invalid=61 send_seq=215 receive_seq=215 retransmit_seq=140 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868747 heater_bed: target=45 temp=43.5 pwm=0.196 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=169.9 pwm=1.000
  1366. Stats 750.9: gcodein=230 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=2750 bytes_read=10425 bytes_retransmit=655 bytes_invalid=61 send_seq=219 receive_seq=218 retransmit_seq=140 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868750 heater_bed: target=45 temp=43.5 pwm=0.182 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=170.8 pwm=1.000
  1367. Stats 751.9: gcodein=239 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=2796 bytes_read=10545 bytes_retransmit=655 bytes_invalid=61 send_seq=223 receive_seq=223 retransmit_seq=140 srtt=0.007 rttvar=0.005 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868753 heater_bed: target=45 temp=43.5 pwm=0.253 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=172.0 pwm=1.000
  1368. Stats 752.9: gcodein=248 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=2842 bytes_read=10674 bytes_retransmit=655 bytes_invalid=61 send_seq=227 receive_seq=227 retransmit_seq=140 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868756 heater_bed: target=45 temp=43.6 pwm=0.147 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=173.0 pwm=1.000
  1369. Stats 753.9: gcodein=257 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000065 bytes_write=2900 bytes_read=10808 bytes_retransmit=655 bytes_invalid=61 send_seq=232 receive_seq=232 retransmit_seq=140 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868758 heater_bed: target=45 temp=43.7 pwm=0.024 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=174.5 pwm=1.000
  1370. Stats 754.9: gcodein=266 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=2914 bytes_read=10922 bytes_retransmit=655 bytes_invalid=61 send_seq=233 receive_seq=233 retransmit_seq=140 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868761 heater_bed: target=45 temp=43.8 pwm=0.086 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=175.8 pwm=1.000
  1371. Stats 755.9: gcodein=275 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=2961 bytes_read=11037 bytes_retransmit=655 bytes_invalid=61 send_seq=237 receive_seq=237 retransmit_seq=140 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868764 heater_bed: target=45 temp=44.1 pwm=0.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=176.9 pwm=1.000
  1372. Stats 756.9: gcodein=284 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=3007 bytes_read=11180 bytes_retransmit=655 bytes_invalid=61 send_seq=241 receive_seq=241 retransmit_seq=140 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868766 heater_bed: target=45 temp=43.8 pwm=0.269 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=179.0 pwm=1.000
  1373. Stats 757.9: gcodein=293 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=3052 bytes_read=11295 bytes_retransmit=655 bytes_invalid=61 send_seq=245 receive_seq=245 retransmit_seq=140 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868769 heater_bed: target=45 temp=43.9 pwm=0.263 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=180.5 pwm=1.000
  1374. Stats 758.9: gcodein=302 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000063 bytes_write=3092 bytes_read=11405 bytes_retransmit=655 bytes_invalid=61 send_seq=248 receive_seq=248 retransmit_seq=140 srtt=0.009 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=0 freq=15868772 heater_bed: target=45 temp=44.0 pwm=0.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=182.0 pwm=1.000
  1375. Stats 759.9: gcodein=311 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=3139 bytes_read=11548 bytes_retransmit=655 bytes_invalid=61 send_seq=252 receive_seq=252 retransmit_seq=140 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868775 heater_bed: target=45 temp=44.1 pwm=0.016 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=183.7 pwm=1.000
  1376. Stats 760.9: gcodein=320 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=3184 bytes_read=11677 bytes_retransmit=655 bytes_invalid=61 send_seq=256 receive_seq=256 retransmit_seq=140 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868777 heater_bed: target=45 temp=44.0 pwm=0.131 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=185.4 pwm=1.000
  1377. Stats 761.9: gcodein=329 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=3229 bytes_read=11792 bytes_retransmit=655 bytes_invalid=61 send_seq=260 receive_seq=260 retransmit_seq=140 srtt=0.010 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868779 heater_bed: target=45 temp=44.1 pwm=0.035 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=187.7 pwm=1.000
  1378. Stats 762.9: gcodein=338 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=3248 bytes_read=11911 bytes_retransmit=655 bytes_invalid=61 send_seq=262 receive_seq=262 retransmit_seq=140 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868781 heater_bed: target=45 temp=44.1 pwm=0.144 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=189.3 pwm=1.000
  1379. Stats 763.9: gcodein=347 mcu: mcu_awake=0.009 mcu_task_avg=0.000084 mcu_task_stddev=0.000066 bytes_write=3276 bytes_read=12016 bytes_retransmit=655 bytes_invalid=74 send_seq=264 receive_seq=264 retransmit_seq=140 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868784 heater_bed: target=45 temp=44.1 pwm=0.241 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=191.7 pwm=1.000
  1380. Stats 764.9: gcodein=356 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000068 bytes_write=3295 bytes_read=12135 bytes_retransmit=655 bytes_invalid=74 send_seq=266 receive_seq=266 retransmit_seq=140 srtt=0.009 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868786 heater_bed: target=45 temp=44.2 pwm=0.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=193.3 pwm=1.000
  1381. Stats 765.9: gcodein=365 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000068 bytes_write=3328 bytes_read=12259 bytes_retransmit=655 bytes_invalid=74 send_seq=269 receive_seq=269 retransmit_seq=140 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868787 heater_bed: target=45 temp=44.1 pwm=0.383 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=195.0 pwm=1.000
  1382. Stats 766.9: gcodein=374 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000068 bytes_write=3360 bytes_read=12383 bytes_retransmit=655 bytes_invalid=74 send_seq=272 receive_seq=272 retransmit_seq=140 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868789 heater_bed: target=45 temp=44.2 pwm=0.128 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=197.6 pwm=1.000
  1383. Stats 767.9: gcodein=383 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000068 bytes_write=3434 bytes_read=12508 bytes_retransmit=655 bytes_invalid=74 send_seq=278 receive_seq=278 retransmit_seq=140 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868790 heater_bed: target=45 temp=44.1 pwm=0.405 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.1 pwm=1.000
  1384. Stats 768.9: gcodein=392 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000068 bytes_write=3481 bytes_read=12637 bytes_retransmit=655 bytes_invalid=74 send_seq=282 receive_seq=282 retransmit_seq=140 srtt=0.010 rttvar=0.004 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868793 heater_bed: target=45 temp=44.2 pwm=0.071 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.0 pwm=0.900
  1385. Stats 769.9: gcodein=401 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000062 bytes_write=3582 bytes_read=12800 bytes_retransmit=655 bytes_invalid=74 send_seq=290 receive_seq=290 retransmit_seq=140 srtt=0.010 rttvar=0.006 rto=0.036 ready_bytes=9 stalled_bytes=0 freq=15868794 heater_bed: target=45 temp=44.1 pwm=0.304 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=203.6 pwm=0.736
  1386. Stats 770.9: gcodein=410 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000062 bytes_write=3656 bytes_read=12925 bytes_retransmit=655 bytes_invalid=74 send_seq=296 receive_seq=296 retransmit_seq=140 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868795 heater_bed: target=45 temp=44.4 pwm=0.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=205.4 pwm=0.649
  1387. Stats 771.9: gcodein=419 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000062 bytes_write=3717 bytes_read=13045 bytes_retransmit=655 bytes_invalid=74 send_seq=301 receive_seq=301 retransmit_seq=140 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868796 heater_bed: target=45 temp=44.3 pwm=0.069 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=207.0 pwm=0.608
  1388. Stats 772.9: gcodein=428 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000062 bytes_write=3804 bytes_read=13189 bytes_retransmit=655 bytes_invalid=74 send_seq=308 receive_seq=308 retransmit_seq=140 srtt=0.011 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868797 heater_bed: target=45 temp=44.3 pwm=0.118 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=209.1 pwm=0.377
  1389. Stats 773.9: gcodein=437 mcu: mcu_awake=0.009 mcu_task_avg=0.000086 mcu_task_stddev=0.000062 bytes_write=3885 bytes_read=13323 bytes_retransmit=669 bytes_invalid=74 send_seq=314 receive_seq=314 retransmit_seq=309 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868799 heater_bed: target=45 temp=44.4 pwm=0.094 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=211.5 pwm=0.201
  1390. Stats 774.9: gcodein=446 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000065 bytes_write=3943 bytes_read=13457 bytes_retransmit=669 bytes_invalid=74 send_seq=319 receive_seq=319 retransmit_seq=309 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868800 heater_bed: target=45 temp=44.4 pwm=0.044 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.5 pwm=0.327
  1391. Stats 775.9: gcodein=455 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000065 bytes_write=4014 bytes_read=13596 bytes_retransmit=669 bytes_invalid=74 send_seq=325 receive_seq=325 retransmit_seq=309 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868802 heater_bed: target=45 temp=44.5 pwm=0.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.3 pwm=0.187
  1392. Stats 776.9: gcodein=464 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000065 bytes_write=4098 bytes_read=13740 bytes_retransmit=669 bytes_invalid=74 send_seq=332 receive_seq=332 retransmit_seq=309 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868802 heater_bed: target=45 temp=44.4 pwm=0.213 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=215.9 pwm=0.153
  1393. Heater extruder within range of 220.000
  1394. Stats 777.9: gcodein=473 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000065 bytes_write=4151 bytes_read=13855 bytes_retransmit=669 bytes_invalid=74 send_seq=336 receive_seq=336 retransmit_seq=309 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868804 heater_bed: target=45 temp=44.6 pwm=0.013 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.9 pwm=0.182
  1395. Stats 778.9: gcodein=482 mcu: mcu_awake=0.010 mcu_task_avg=0.000089 mcu_task_stddev=0.000065 bytes_write=4183 bytes_read=13979 bytes_retransmit=669 bytes_invalid=74 send_seq=339 receive_seq=339 retransmit_seq=309 srtt=0.007 rttvar=0.005 rto=0.026 ready_bytes=8 stalled_bytes=0 freq=15868805 heater_bed: target=45 temp=44.6 pwm=0.000 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.2 pwm=0.102
  1396. Stats 779.9: gcodein=491 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000068 bytes_write=4254 bytes_read=14132 bytes_retransmit=669 bytes_invalid=74 send_seq=345 receive_seq=345 retransmit_seq=309 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868805 heater_bed: target=45 temp=44.5 pwm=0.220 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.000
  1397. Stats 780.9: gcodein=500 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000068 bytes_write=4325 bytes_read=14257 bytes_retransmit=669 bytes_invalid=74 send_seq=351 receive_seq=351 retransmit_seq=309 srtt=0.009 rttvar=0.006 rto=0.031 ready_bytes=0 stalled_bytes=0 freq=15868807 heater_bed: target=45 temp=44.5 pwm=0.293 print_time=132.614 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.060
  1398. Starting SD card print (position 0)
  1399. Stats 781.9: gcodein=544 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000068 bytes_write=4549 bytes_read=14396 bytes_retransmit=669 bytes_invalid=74 send_seq=357 receive_seq=357 retransmit_seq=309 srtt=0.009 rttvar=0.006 rto=0.034 ready_bytes=8 stalled_bytes=0 freq=15868808 heater_bed: target=45 temp=44.6 pwm=0.019 sd_pos=6084 print_time=174.296 buffer_time=0.525 print_stall=0 extruder: target=220 temp=220.7 pwm=0.060
  1400. Stats 782.9: gcodein=553 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000068 bytes_write=4786 bytes_read=14564 bytes_retransmit=669 bytes_invalid=74 send_seq=365 receive_seq=365 retransmit_seq=309 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868809 heater_bed: target=45 temp=44.6 pwm=0.077 sd_pos=6084 print_time=174.768 buffer_time=0.004 print_stall=0 extruder: target=220 temp=221.0 pwm=0.178
  1401. Stats 783.9: gcodein=557 mcu: mcu_awake=0.010 mcu_task_avg=0.000090 mcu_task_stddev=0.000068 bytes_write=4960 bytes_read=14702 bytes_retransmit=814 bytes_invalid=93 send_seq=374 receive_seq=374 retransmit_seq=374 srtt=0.009 rttvar=0.004 rto=0.204 ready_bytes=0 stalled_bytes=0 freq=15868809 heater_bed: target=45 temp=44.6 pwm=0.131 sd_pos=6084 print_time=175.321 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.178
  1402. Stats 784.9: gcodein=561 mcu: mcu_awake=0.017 mcu_task_avg=0.000109 mcu_task_stddev=0.000113 bytes_write=5341 bytes_read=14893 bytes_retransmit=944 bytes_invalid=102 send_seq=388 receive_seq=388 retransmit_seq=378 srtt=0.010 rttvar=0.004 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868809 heater_bed: target=45 temp=44.7 pwm=0.000 sd_pos=6084 print_time=176.875 buffer_time=0.126 print_stall=0 extruder: target=220 temp=221.3 pwm=0.277
  1403. Stats 785.9: gcodein=565 mcu: mcu_awake=0.017 mcu_task_avg=0.000109 mcu_task_stddev=0.000113 bytes_write=5629 bytes_read=15070 bytes_retransmit=944 bytes_invalid=102 send_seq=398 receive_seq=398 retransmit_seq=378 srtt=0.010 rttvar=0.006 rto=0.034 ready_bytes=0 stalled_bytes=0 freq=15868810 heater_bed: target=45 temp=44.7 pwm=0.188 sd_pos=6084 print_time=177.893 buffer_time=0.151 print_stall=0 extruder: target=220 temp=221.4 pwm=0.288
  1404. Stats 786.9: gcodein=569 mcu: mcu_awake=0.017 mcu_task_avg=0.000109 mcu_task_stddev=0.000113 bytes_write=6044 bytes_read=15237 bytes_retransmit=1129 bytes_invalid=102 send_seq=409 receive_seq=406 retransmit_seq=409 srtt=0.008 rttvar=0.003 rto=0.050 ready_bytes=587 stalled_bytes=0 freq=15868810 heater_bed: target=45 temp=44.7 pwm=0.106 sd_pos=6624 print_time=181.024 buffer_time=2.290 print_stall=0 extruder: target=220 temp=221.5 pwm=0.288
  1405. Stats 787.9: gcodein=578 mcu: mcu_awake=0.017 mcu_task_avg=0.000109 mcu_task_stddev=0.000113 bytes_write=6837 bytes_read=15394 bytes_retransmit=1684 bytes_invalid=102 send_seq=424 receive_seq=424 retransmit_seq=409 srtt=0.011 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=44.7 pwm=0.124 sd_pos=6736 print_time=182.262 buffer_time=2.535 print_stall=0 extruder: target=220 temp=221.2 pwm=0.408
  1406. Stats 788.9: gcodein=582 mcu: mcu_awake=0.017 mcu_task_avg=0.000109 mcu_task_stddev=0.000113 bytes_write=7013 bytes_read=15533 bytes_retransmit=1684 bytes_invalid=102 send_seq=430 receive_seq=430 retransmit_seq=409 srtt=0.011 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=44.7 pwm=0.053 sd_pos=6852 print_time=183.500 buffer_time=2.780 print_stall=0 extruder: target=220 temp=221.1 pwm=0.459
  1407. Stats 789.9: gcodein=586 mcu: mcu_awake=0.027 mcu_task_avg=0.000144 mcu_task_stddev=0.000160 bytes_write=7181 bytes_read=15687 bytes_retransmit=1684 bytes_invalid=102 send_seq=436 receive_seq=436 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.026 ready_bytes=8 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=44.7 pwm=0.153 sd_pos=6964 print_time=184.738 buffer_time=3.026 print_stall=0 extruder: target=220 temp=221.0 pwm=0.445
  1408. Stats 790.9: gcodein=590 mcu: mcu_awake=0.027 mcu_task_avg=0.000144 mcu_task_stddev=0.000160 bytes_write=7256 bytes_read=15807 bytes_retransmit=1684 bytes_invalid=102 send_seq=441 receive_seq=441 retransmit_seq=409 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=44.7 pwm=0.166 sd_pos=6964 print_time=184.738 buffer_time=2.033 print_stall=0 extruder: target=220 temp=221.0 pwm=0.438
  1409. Stats 791.9: gcodein=594 mcu: mcu_awake=0.027 mcu_task_avg=0.000144 mcu_task_stddev=0.000160 bytes_write=7648 bytes_read=15966 bytes_retransmit=1684 bytes_invalid=102 send_seq=451 receive_seq=451 retransmit_seq=409 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=44.8 pwm=0.000 sd_pos=7103 print_time=185.999 buffer_time=2.301 print_stall=0 extruder: target=220 temp=220.6 pwm=0.535
  1410. Stats 792.9: gcodein=603 mcu: mcu_awake=0.027 mcu_task_avg=0.000144 mcu_task_stddev=0.000160 bytes_write=7846 bytes_read=16110 bytes_retransmit=1684 bytes_invalid=102 send_seq=458 receive_seq=458 retransmit_seq=409 srtt=0.009 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868814 heater_bed: target=45 temp=44.8 pwm=0.046 sd_pos=7215 print_time=187.208 buffer_time=2.517 print_stall=0 extruder: target=220 temp=220.8 pwm=0.393
  1411. Stats 793.9: gcodein=607 mcu: mcu_awake=0.027 mcu_task_avg=0.000144 mcu_task_stddev=0.000160 bytes_write=8050 bytes_read=16245 bytes_retransmit=1684 bytes_invalid=102 send_seq=466 receive_seq=466 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868813 heater_bed: target=45 temp=44.7 pwm=0.153 sd_pos=7331 print_time=188.418 buffer_time=2.734 print_stall=0 extruder: target=220 temp=219.8 pwm=0.703
  1412. Unknown command:"M108"
  1413. Exiting SD card print (position 7359)
  1414. Stats 794.9: gcodein=680 mcu: mcu_awake=0.015 mcu_task_avg=0.000123 mcu_task_stddev=0.000124 bytes_write=8169 bytes_read=16389 bytes_retransmit=1684 bytes_invalid=102 send_seq=471 receive_seq=470 retransmit_seq=409 srtt=0.008 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868813 heater_bed: target=45 temp=44.9 pwm=0.000 print_time=189.502 buffer_time=2.826 print_stall=0 extruder: target=220 temp=219.6 pwm=0.662
  1415. Stats 795.9: gcodein=695 mcu: mcu_awake=0.015 mcu_task_avg=0.000123 mcu_task_stddev=0.000124 bytes_write=8288 bytes_read=16533 bytes_retransmit=1684 bytes_invalid=102 send_seq=477 receive_seq=477 retransmit_seq=409 srtt=0.011 rttvar=0.003 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=15868812 heater_bed: target=45 temp=44.8 pwm=0.017 print_time=190.108 buffer_time=2.440 print_stall=0 extruder: target=220 temp=219.4 pwm=0.684
  1416. Stats 796.9: gcodein=707 mcu: mcu_awake=0.015 mcu_task_avg=0.000123 mcu_task_stddev=0.000124 bytes_write=8566 bytes_read=16668 bytes_retransmit=1684 bytes_invalid=102 send_seq=485 receive_seq=485 retransmit_seq=409 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868811 heater_bed: target=45 temp=44.9 pwm=0.017 print_time=193.500 buffer_time=4.838 print_stall=0 extruder: target=220 temp=219.5 pwm=0.605
  1417. Stats 797.9: gcodein=716 mcu: mcu_awake=0.015 mcu_task_avg=0.000123 mcu_task_stddev=0.000124 bytes_write=8613 bytes_read=16783 bytes_retransmit=1684 bytes_invalid=102 send_seq=489 receive_seq=489 retransmit_seq=409 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868810 heater_bed: target=45 temp=44.9 pwm=0.082 print_time=193.500 buffer_time=3.845 print_stall=0 extruder: target=220 temp=219.6 pwm=0.527
  1418. Stats 798.9: gcodein=716 mcu: mcu_awake=0.015 mcu_task_avg=0.000123 mcu_task_stddev=0.000124 bytes_write=8694 bytes_read=16936 bytes_retransmit=1684 bytes_invalid=102 send_seq=495 receive_seq=495 retransmit_seq=409 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868810 heater_bed: target=45 temp=44.9 pwm=0.000 print_time=193.500 buffer_time=2.852 print_stall=0 extruder: target=220 temp=219.5 pwm=0.561
  1419. Stats 799.9: gcodein=728 mcu: mcu_awake=0.015 mcu_task_avg=0.000123 mcu_task_stddev=0.000124 bytes_write=8700 bytes_read=17036 bytes_retransmit=1684 bytes_invalid=102 send_seq=496 receive_seq=496 retransmit_seq=409 srtt=0.009 rttvar=0.002 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=15868809 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=193.600 buffer_time=1.959 print_stall=0 extruder: target=0 temp=219.2 pwm=0.561
  1420. Stats 800.9: gcodein=732 mcu: mcu_awake=0.012 mcu_task_avg=0.000109 mcu_task_stddev=0.000108 bytes_write=8751 bytes_read=17156 bytes_retransmit=1684 bytes_invalid=102 send_seq=498 receive_seq=498 retransmit_seq=409 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868810 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=193.600 buffer_time=0.967 print_stall=0 extruder: target=0 temp=219.4 pwm=0.000
  1421. Stats 801.9: gcodein=736 mcu: mcu_awake=0.012 mcu_task_avg=0.000109 mcu_task_stddev=0.000108 bytes_write=8757 bytes_read=17270 bytes_retransmit=1684 bytes_invalid=102 send_seq=499 receive_seq=499 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868809 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.2 pwm=0.000
  1422. Stats 802.9: gcodein=745 mcu: mcu_awake=0.012 mcu_task_avg=0.000109 mcu_task_stddev=0.000108 bytes_write=8763 bytes_read=17384 bytes_retransmit=1684 bytes_invalid=102 send_seq=500 receive_seq=500 retransmit_seq=409 srtt=0.009 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868808 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.6 pwm=0.000
  1423. Stats 803.9: gcodein=749 mcu: mcu_awake=0.012 mcu_task_avg=0.000109 mcu_task_stddev=0.000108 bytes_write=8769 bytes_read=17484 bytes_retransmit=1684 bytes_invalid=102 send_seq=501 receive_seq=501 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868807 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.8 pwm=0.000
  1424. Stats 804.9: gcodein=753 mcu: mcu_awake=0.012 mcu_task_avg=0.000109 mcu_task_stddev=0.000108 bytes_write=8775 bytes_read=17598 bytes_retransmit=1684 bytes_invalid=102 send_seq=502 receive_seq=502 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868806 heater_bed: target=0 temp=45.0 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.6 pwm=0.000
  1425. Stats 805.9: gcodein=757 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000083 bytes_write=8787 bytes_read=17725 bytes_retransmit=1684 bytes_invalid=102 send_seq=504 receive_seq=503 retransmit_seq=409 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868805 heater_bed: target=0 temp=44.9 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.6 pwm=0.000
  1426. Stats 806.9: gcodein=761 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000083 bytes_write=8793 bytes_read=17841 bytes_retransmit=1684 bytes_invalid=102 send_seq=505 receive_seq=505 retransmit_seq=409 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868803 heater_bed: target=0 temp=44.9 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.9 pwm=0.000
  1427. Stats 807.9: gcodein=770 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000083 bytes_write=8799 bytes_read=17955 bytes_retransmit=1684 bytes_invalid=102 send_seq=506 receive_seq=506 retransmit_seq=409 srtt=0.010 rttvar=0.005 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868801 heater_bed: target=0 temp=44.9 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.9 pwm=0.000
  1428. Stats 808.9: gcodein=774 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000083 bytes_write=8805 bytes_read=18069 bytes_retransmit=1684 bytes_invalid=102 send_seq=507 receive_seq=507 retransmit_seq=409 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868800 heater_bed: target=0 temp=44.9 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.6 pwm=0.000
  1429. Stats 809.9: gcodein=778 mcu: mcu_awake=0.008 mcu_task_avg=0.000085 mcu_task_stddev=0.000083 bytes_write=8811 bytes_read=18169 bytes_retransmit=1684 bytes_invalid=102 send_seq=508 receive_seq=508 retransmit_seq=409 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868799 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.4 pwm=0.000
  1430. Stats 810.9: gcodein=782 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=8817 bytes_read=18296 bytes_retransmit=1684 bytes_invalid=102 send_seq=509 receive_seq=509 retransmit_seq=409 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868798 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.6 pwm=0.000
  1431. Stats 811.9: gcodein=786 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=8823 bytes_read=18410 bytes_retransmit=1684 bytes_invalid=102 send_seq=510 receive_seq=510 retransmit_seq=409 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868796 heater_bed: target=0 temp=44.8 pwm=0.000 print_time=193.600 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.3 pwm=0.000
  1432. Starting SD card print (position 0)
  1433. Stats 812.9: gcodein=830 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=9063 bytes_read=18540 bytes_retransmit=1684 bytes_invalid=102 send_seq=517 receive_seq=517 retransmit_seq=409 srtt=0.008 rttvar=0.006 rto=0.030 ready_bytes=0 stalled_bytes=0 freq=15868794 heater_bed: target=45 temp=44.8 pwm=0.168 sd_pos=6084 print_time=204.683 buffer_time=0.138 print_stall=0 extruder: target=220 temp=216.7 pwm=0.995
  1434. Stats 813.9: gcodein=834 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=9445 bytes_read=18743 bytes_retransmit=1684 bytes_invalid=102 send_seq=531 receive_seq=531 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868792 heater_bed: target=45 temp=44.7 pwm=0.381 sd_pos=6084 print_time=205.698 buffer_time=0.160 print_stall=0 extruder: target=220 temp=215.7 pwm=0.995
  1435. Stats 814.9: gcodein=838 mcu: mcu_awake=0.007 mcu_task_avg=0.000076 mcu_task_stddev=0.000064 bytes_write=9687 bytes_read=18914 bytes_retransmit=1684 bytes_invalid=102 send_seq=540 receive_seq=540 retransmit_seq=409 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868790 heater_bed: target=45 temp=44.7 pwm=0.324 sd_pos=6084 print_time=206.570 buffer_time=0.040 print_stall=0 extruder: target=220 temp=215.4 pwm=0.995
  1436. Stats 815.9: gcodein=842 mcu: mcu_awake=0.015 mcu_task_avg=0.000118 mcu_task_stddev=0.000121 bytes_write=9867 bytes_read=19095 bytes_retransmit=1684 bytes_invalid=102 send_seq=548 receive_seq=548 retransmit_seq=409 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868789 heater_bed: target=45 temp=44.7 pwm=0.183 sd_pos=6084 print_time=207.150 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.4 pwm=0.995
  1437. Stats 816.9: gcodein=846 mcu: mcu_awake=0.015 mcu_task_avg=0.000118 mcu_task_stddev=0.000121 bytes_write=10143 bytes_read=19253 bytes_retransmit=1684 bytes_invalid=102 send_seq=557 receive_seq=557 retransmit_seq=409 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868787 heater_bed: target=45 temp=44.7 pwm=0.156 sd_pos=6084 print_time=208.565 buffer_time=0.050 print_stall=0 extruder: target=220 temp=214.2 pwm=1.000
  1438. Stats 817.9: gcodein=855 mcu: mcu_awake=0.015 mcu_task_avg=0.000118 mcu_task_stddev=0.000121 bytes_write=11212 bytes_read=19485 bytes_retransmit=1684 bytes_invalid=102 send_seq=579 receive_seq=578 retransmit_seq=409 srtt=0.010 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868789 heater_bed: target=45 temp=44.6 pwm=0.391 sd_pos=6624 print_time=211.695 buffer_time=2.187 print_stall=0 extruder: target=220 temp=213.7 pwm=1.000
  1439. Stats 818.9: gcodein=859 mcu: mcu_awake=0.015 mcu_task_avg=0.000118 mcu_task_stddev=0.000121 bytes_write=11341 bytes_read=19586 bytes_retransmit=1806 bytes_invalid=108 send_seq=582 receive_seq=582 retransmit_seq=580 srtt=0.010 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868787 heater_bed: target=45 temp=44.7 pwm=0.192 sd_pos=6736 print_time=212.933 buffer_time=2.433 print_stall=0 extruder: target=220 temp=213.7 pwm=1.000
  1440. Stats 819.9: gcodein=863 mcu: mcu_awake=0.015 mcu_task_avg=0.000118 mcu_task_stddev=0.000121 bytes_write=11477 bytes_read=19696 bytes_retransmit=1806 bytes_invalid=108 send_seq=585 receive_seq=585 retransmit_seq=580 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868786 heater_bed: target=45 temp=44.8 pwm=0.050 sd_pos=6852 print_time=214.171 buffer_time=2.678 print_stall=0 extruder: target=220 temp=214.1 pwm=1.000
  1441. Stats 820.9: gcodein=867 mcu: mcu_awake=0.023 mcu_task_avg=0.000152 mcu_task_stddev=0.000164 bytes_write=11662 bytes_read=19850 bytes_retransmit=1806 bytes_invalid=108 send_seq=591 receive_seq=591 retransmit_seq=580 srtt=0.010 rttvar=0.004 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15868784 heater_bed: target=45 temp=44.7 pwm=0.236 sd_pos=6964 print_time=215.409 buffer_time=2.923 print_stall=0 extruder: target=220 temp=214.3 pwm=0.984
  1442. Stats 821.9: gcodein=871 mcu: mcu_awake=0.023 mcu_task_avg=0.000152 mcu_task_stddev=0.000164 bytes_write=11995 bytes_read=19971 bytes_retransmit=1806 bytes_invalid=108 send_seq=599 receive_seq=599 retransmit_seq=580 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=15868782 heater_bed: target=45 temp=44.7 pwm=0.183 sd_pos=7103 print_time=216.670 buffer_time=3.192 print_stall=0 extruder: target=220 temp=214.9 pwm=0.876
  1443. Stats 822.9: gcodein=880 mcu: mcu_awake=0.023 mcu_task_avg=0.000152 mcu_task_stddev=0.000164 bytes_write=12086 bytes_read=20091 bytes_retransmit=1806 bytes_invalid=108 send_seq=604 receive_seq=604 retransmit_seq=580 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868780 heater_bed: target=45 temp=44.8 pwm=0.060 sd_pos=7103 print_time=216.670 buffer_time=2.199 print_stall=0 extruder: target=220 temp=215.7 pwm=0.758
  1444. Stats 823.9: gcodein=884 mcu: mcu_awake=0.023 mcu_task_avg=0.000152 mcu_task_stddev=0.000164 bytes_write=12306 bytes_read=20240 bytes_retransmit=1806 bytes_invalid=108 send_seq=612 receive_seq=612 retransmit_seq=580 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=8 stalled_bytes=0 freq=15868778 heater_bed: target=45 temp=44.8 pwm=0.149 sd_pos=7215 print_time=217.879 buffer_time=2.416 print_stall=0 extruder: target=220 temp=215.8 pwm=0.761
  1445. Stats 824.9: gcodein=888 mcu: mcu_awake=0.023 mcu_task_avg=0.000152 mcu_task_stddev=0.000164 bytes_write=12504 bytes_read=20384 bytes_retransmit=1806 bytes_invalid=108 send_seq=619 receive_seq=619 retransmit_seq=580 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=15868775 heater_bed: target=45 temp=44.8 pwm=0.099 sd_pos=7331 print_time=219.089 buffer_time=2.633 print_stall=0 extruder: target=220 temp=216.7 pwm=0.610
  1446. Stats 825.9: gcodein=892 mcu: mcu_awake=0.016 mcu_task_avg=0.000125 mcu_task_stddev=0.000133 bytes_write=12695 bytes_read=20529 bytes_retransmit=1820 bytes_invalid=108 send_seq=626 receive_seq=626 retransmit_seq=626 srtt=0.008 rttvar=0.004 rto=0.050 ready_bytes=0 stalled_bytes=0 freq=15868773 heater_bed: target=45 temp=44.8 pwm=0.146 sd_pos=7443 print_time=220.299 buffer_time=2.850 print_stall=0 extruder: target=220 temp=217.4 pwm=0.558
  1447. Stats 826.9: gcodein=896 mcu: mcu_awake=0.016 mcu_task_avg=0.000125 mcu_task_stddev=0.000133 bytes_write=13033 bytes_read=20665 bytes_retransmit=1994 bytes_invalid=116 send_seq=635 receive_seq=635 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=48 stalled_bytes=0 freq=15868770 heater_bed: target=45 temp=44.9 pwm=0.000 sd_pos=7582 print_time=221.531 buffer_time=3.089 print_stall=0 extruder: target=220 temp=218.1 pwm=0.478
  1448. Stats 827.9: gcodein=905 mcu: mcu_awake=0.016 mcu_task_avg=0.000125 mcu_task_stddev=0.000133 bytes_write=13154 bytes_read=20804 bytes_retransmit=1994 bytes_invalid=116 send_seq=641 receive_seq=641 retransmit_seq=634 srtt=0.011 rttvar=0.006 rto=0.033 ready_bytes=0 stalled_bytes=0 freq=15868768 heater_bed: target=45 temp=45.0 pwm=0.000 sd_pos=7582 print_time=221.531 buffer_time=2.097 print_stall=0 extruder: target=220 temp=218.7 pwm=0.459
  1449. Stats 828.9: gcodein=909 mcu: mcu_awake=0.016 mcu_task_avg=0.000125 mcu_task_stddev=0.000133 bytes_write=13351 bytes_read=20948 bytes_retransmit=1994 bytes_invalid=116 send_seq=648 receive_seq=648 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868765 heater_bed: target=45 temp=45.0 pwm=0.000 sd_pos=7694 print_time=222.712 buffer_time=2.285 print_stall=0 extruder: target=220 temp=219.8 pwm=0.279
  1450. Stats 829.9: gcodein=913 mcu: mcu_awake=0.016 mcu_task_avg=0.000125 mcu_task_stddev=0.000133 bytes_write=13554 bytes_read=21078 bytes_retransmit=1994 bytes_invalid=116 send_seq=655 receive_seq=655 retransmit_seq=634 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15868763 heater_bed: target=45 temp=45.0 pwm=0.033 sd_pos=7810 print_time=223.893 buffer_time=2.474 print_stall=0 extruder: target=220 temp=220.3 pwm=0.233
  1451. Stats 830.9: gcodein=917 mcu: mcu_awake=0.017 mcu_task_avg=0.000120 mcu_task_stddev=0.000127 bytes_write=13717 bytes_read=21227 bytes_retransmit=1994 bytes_invalid=116 send_seq=660 receive_seq=660 retransmit_seq=634 srtt=0.011 rttvar=0.004 rto=0.027 ready_bytes=0 stalled_bytes=0 freq=15868761 heater_bed: target=45 temp=45.1 pwm=0.033 sd_pos=7922 print_time=225.074 buffer_time=2.663 print_stall=0 extruder: target=220 temp=221.0 pwm=0.210
  1452. Stats 831.9: gcodein=921 mcu: mcu_awake=0.017 mcu_task_avg=0.000120 mcu_task_stddev=0.000127 bytes_write=14047 bytes_read=21376 bytes_retransmit=1994 bytes_invalid=116 send_seq=668 receive_seq=668 retransmit_seq=634 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=48 stalled_bytes=0 freq=15868758 heater_bed: target=45 temp=45.2 pwm=0.033 sd_pos=8061 print_time=226.278 buffer_time=2.874 print_stall=0 extruder: target=220 temp=221.4 pwm=0.258
  1453. Stats 832.9: gcodein=930 mcu: mcu_awake=0.017 mcu_task_avg=0.000120 mcu_task_stddev=0.000127 bytes_write=14261 bytes_read=21501 bytes_retransmit=1994 bytes_invalid=116 send_seq=674 receive_seq=674 retransmit_seq=634 srtt=0.010 rttvar=0.005 rto=0.032 ready_bytes=24 stalled_bytes=0 freq=15868756 heater_bed: target=45 temp=45.1 pwm=0.059 sd_pos=8173 print_time=227.431 buffer_time=3.034 print_stall=0 extruder: target=220 temp=221.4 pwm=0.319
  1454. Stats 833.9: gcodein=934 mcu: mcu_awake=0.017 mcu_task_avg=0.000120 mcu_task_stddev=0.000127 bytes_write=14356 bytes_read=21640 bytes_retransmit=1994 bytes_invalid=116 send_seq=680 receive_seq=680 retransmit_seq=634 srtt=0.011 rttvar=0.004 rto=0.026 ready_bytes=8 stalled_bytes=0 freq=15868753 heater_bed: target=45 temp=45.2 pwm=0.000 sd_pos=8173 print_time=227.431 buffer_time=2.042 print_stall=0 extruder: target=220 temp=222.0 pwm=0.213
  1455. Stats 834.9: gcodein=938 mcu: mcu_awake=0.017 mcu_task_avg=0.000120 mcu_task_stddev=0.000127 bytes_write=14531 bytes_read=21779 bytes_retransmit=1994 bytes_invalid=116 send_seq=686 receive_seq=686 retransmit_seq=634 srtt=0.011 rttvar=0.005 rto=0.031 ready_bytes=8 stalled_bytes=0 freq=15868750 heater_bed: target=45 temp=45.2 pwm=0.000 sd_pos=8289 print_time=228.584 buffer_time=2.202 print_stall=0 extruder: target=220 temp=222.1 pwm=0.288
  1456. Stats 835.9: gcodein=942 mcu: mcu_awake=0.017 mcu_task_avg=0.000135 mcu_task_stddev=0.000147 bytes_write=14740 bytes_read=21929 bytes_retransmit=1994 bytes_invalid=116 send_seq=694 receive_seq=694 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.028 ready_bytes=0 stalled_bytes=0 freq=15868748 heater_bed: target=45 temp=45.2 pwm=0.100 sd_pos=8401 print_time=229.737 buffer_time=2.363 print_stall=0 extruder: target=220 temp=222.2 pwm=0.313
  1457. Stats 836.9: gcodein=946 mcu: mcu_awake=0.017 mcu_task_avg=0.000135 mcu_task_stddev=0.000147 bytes_write=15129 bytes_read=22088 bytes_retransmit=1994 bytes_invalid=116 send_seq=704 receive_seq=704 retransmit_seq=634 srtt=0.009 rttvar=0.004 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868745 heater_bed: target=45 temp=45.2 pwm=0.061 sd_pos=8540 print_time=230.912 buffer_time=2.545 print_stall=0 extruder: target=220 temp=222.6 pwm=0.226
  1458. Stats 837.9: gcodein=955 mcu: mcu_awake=0.017 mcu_task_avg=0.000135 mcu_task_stddev=0.000147 bytes_write=15293 bytes_read=22227 bytes_retransmit=1994 bytes_invalid=116 send_seq=710 receive_seq=710 retransmit_seq=634 srtt=0.010 rttvar=0.003 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=15868742 heater_bed: target=45 temp=45.2 pwm=0.099 sd_pos=8652 print_time=232.036 buffer_time=2.676 print_stall=0 extruder: target=220 temp=222.9 pwm=0.202
  1459. Stats 838.9: gcodein=959 mcu: mcu_awake=0.017 mcu_task_avg=0.000135 mcu_task_stddev=0.000147 bytes_write=15464 bytes_read=22352 bytes_retransmit=1994 bytes_invalid=116 send_seq=716 receive_seq=716 retransmit_seq=634 srtt=0.012 rttvar=0.002 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=15868740 heater_bed: target=45 temp=45.2 pwm=0.123 sd_pos=8768 print_time=233.161 buffer_time=2.809 print_stall=0 extruder: target=220 temp=222.7 pwm=0.277
  1460. Stats 839.9: gcodein=963 mcu: mcu_awake=0.017 mcu_task_avg=0.000135 mcu_task_stddev=0.000147 bytes_write=15577 bytes_read=22472 bytes_retransmit=1994 bytes_invalid=116 send_seq=721 receive_seq=721 retransmit_seq=634 srtt=0.010 rttvar=0.005 rto=0.031 ready_bytes=53 stalled_bytes=0 freq=15868737 heater_bed: target=45 temp=45.2 pwm=0.131 sd_pos=8880 print_time=234.285 buffer_time=2.940 print_stall=0 extruder: target=220 temp=222.5 pwm=0.345
  1461. Stats 840.9: gcodein=967 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=15774 bytes_read=22636 bytes_retransmit=1994 bytes_invalid=116 send_seq=729 receive_seq=729 retransmit_seq=634 srtt=0.008 rttvar=0.004 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=15868735 heater_bed: target=45 temp=45.2 pwm=0.170 sd_pos=8995 print_time=235.331 buffer_time=2.993 print_stall=0 extruder: target=220 temp=222.1 pwm=0.433
  1462. Stats 842.0: gcodein=971 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=15851 bytes_read=22770 bytes_retransmit=1994 bytes_invalid=116 send_seq=734 receive_seq=734 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868732 heater_bed: target=45 temp=45.3 pwm=0.000 sd_pos=8995 print_time=235.331 buffer_time=2.001 print_stall=0 extruder: target=220 temp=221.9 pwm=0.444
  1463. Got error -1 in read: (11)Resource temporarily unavailable
  1464. Stats 843.0: gcodein=980 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=0 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 sd_pos=9083 print_time=239.704 buffer_time=5.381 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1465. Stats 844.0: gcodein=984 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=1 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 sd_pos=9083 print_time=239.704 buffer_time=4.388 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1466. Stats 845.0: gcodein=988 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=2 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 sd_pos=9083 print_time=239.704 buffer_time=3.395 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1467. Stats 846.0: gcodein=992 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=3 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 sd_pos=9083 print_time=239.704 buffer_time=2.402 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1468. Stats 847.0: gcodein=996 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=76 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 sd_pos=9141 print_time=244.050 buffer_time=5.756 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1469. Timeout with MCU 'mcu' (eventtime=847.957008)
  1470. Dumping gcode input 50 blocks
  1471. Read 808.172450: 'M27\n'
  1472. Read 809.174863: 'M27\n'
  1473. Read 810.177316: 'M27\n'
  1474. Read 811.178922: 'M27\n'
  1475. Read 812.166770: 'M23 /xyzcalibration_cube.gcode\n'
  1476. Read 812.178243: 'M24\n'
  1477. Read 812.205899: 'M27\n'
  1478. Read 812.261103: 'M105\n'
  1479. Read 813.182981: 'M27\n'
  1480. Read 814.185409: 'M27\n'
  1481. Read 815.186737: 'M27\n'
  1482. Read 816.189240: 'M27\n'
  1483. Read 817.190961: 'M27\n'
  1484. Read 817.762482: 'M105\n'
  1485. Read 818.192253: 'M27\n'
  1486. Read 819.193690: 'M27\n'
  1487. Read 820.195765: 'M27\n'
  1488. Read 821.197187: 'M27\n'
  1489. Read 822.198516: 'M27\n'
  1490. Read 822.264048: 'M105\n'
  1491. Read 823.199946: 'M27\n'
  1492. Read 824.201402: 'M27\n'
  1493. Read 825.203861: 'M27\n'
  1494. Read 826.205210: 'M27\n'
  1495. Read 827.206619: 'M27\n'
  1496. Read 827.265504: 'M105\n'
  1497. Read 828.208047: 'M27\n'
  1498. Read 829.209643: 'M27\n'
  1499. Read 830.211115: 'M27\n'
  1500. Read 831.212430: 'M27\n'
  1501. Read 832.213700: 'M27\n'
  1502. Read 832.266531: 'M105\n'
  1503. Read 833.216235: 'M27\n'
  1504. Read 834.219394: 'M27\n'
  1505. Read 835.221744: 'M27\n'
  1506. Read 836.223173: 'M27\n'
  1507. Read 837.225616: 'M27\n'
  1508. Read 837.274641: 'M105\n'
  1509. Read 838.228121: 'M27\n'
  1510. Read 839.230508: 'M27\n'
  1511. Read 840.232282: 'M27\n'
  1512. Read 841.234643: 'M27\n'
  1513. Read 842.235899: 'M27\n'
  1514. Read 842.275736: 'M105\n'
  1515. Read 843.237322: 'M27\n'
  1516. Read 844.239614: 'M27\n'
  1517. Read 845.241113: 'M27\n'
  1518. Read 846.242431: 'M27\n'
  1519. Read 847.243902: 'M27\n'
  1520. Read 847.276929: 'M105\n'
  1521. gcode state: absolutecoord=True absoluteextrude=False base_position=[0.0, 0.0, 0.0, 0.0] last_position=[99.296, 114.2, 0.469, 59.40030000000001] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.0166666666667 extrude_factor=1.0 speed=315.0
  1522. Virtual sdcard (8117): 'G1 X122.477 Y91.353 E0.1427\nG1 X122.563 Y91.560 E0.0170\nG1 X122.563 Y113.440 E1.6606\nG1 X122.477 Y113.647 E0.0170\nG1 X121.147 Y114.977 E0.1427\nG1 X120.940 Y115.063 E0.0170\nG1 X99.060 Y115.063 E1.6606\nG1 X98.853 Y114.977 E0.0170\nG1 X97.523 Y113.647 E0.1427\nG1 X97.438 Y113.440 E0.0170\nG1 X97.438 Y91.560 E1.6606\nG1 X97.523 Y91.353 E0.0170\nG1 X97.841 Y91.565 F6000\nG1 X99.065 Y90.341 E0.1314 F1260\nG1 X99.134 Y90.313 E0.0057\nG1 X120.866 Y90.313 E1.6493\nG1 X120.935 Y90.341 E0.0057\nG1 X122.159 Y91.565 E0.1314\nG1 X122.188 Y91.634 E0.0057\nG1 X122.188 Y113.366 E1.6493\nG1 X122.159 Y113.435 E0.0057\nG1 X120.935 Y114.659 E0.1314\nG1 X120.866 Y114.688 E0.0057\nG1 X99.134 Y114.688 E1.6493\nG1 X99.065 Y114.659 E0.0057\nG1 X97.841 Y113.435 E0.1314\nG1 X97.813 Y113.366 E0.0057\nG1 X97.813 Y91.634 E1.6493\nG1 X97.841 Y91.565 E0.0057\n; feature raft\n; tool H0.469 W0.600\nG1 X98.300 Y91.796 F6000\nG1 X99.296 Y90.800 E0.1710 F315\nG1 X120.704 Y90.800 E2.5996\nG1 X121.700 Y91.796 E0.1710\nG1 X121.700 Y113.204 E2.5996\nG1 X120.704 Y114.200 E0.1710\n'
  1523. Upcoming (9141): 'G1 X99.296 Y114.200 E2.5996\nG1 X98.300 Y113.204 E0.1710\nG1 X98.300 Y91.796 E2.5996\nG1 X98.690 Y92.214 F6000\nG1 X121.310 Y92.214 '
  1524. Stats 848.0: gcodein=1005 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=77 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 sd_pos=9141 print_time=239.292 buffer_time=0.005 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1525. Lost communication with MCU 'mcu'
  1526. Once the underlying issue is corrected, use the
  1527. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1528. config, and restart the host software.
  1529. Printer is shutdown
  1530.  
  1531. Lost communication with MCU 'mcu'
  1532. Once the underlying issue is corrected, use the
  1533. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1534. config, and restart the host software.
  1535. Printer is shutdown
  1536.  
  1537. Exiting SD card print (position 9169)
  1538. Lost communication with MCU 'mcu'
  1539. Once the underlying issue is corrected, use the
  1540. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1541. config, and restart the host software.
  1542. Printer is shutdown
  1543.  
  1544. Lost communication with MCU 'mcu'
  1545. Once the underlying issue is corrected, use the
  1546. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1547. config, and restart the host software.
  1548. Printer is shutdown
  1549.  
  1550. Lost communication with MCU 'mcu'
  1551. Once the underlying issue is corrected, use the
  1552. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1553. config, and restart the host software.
  1554. Printer is shutdown
  1555.  
  1556. Lost communication with MCU 'mcu'
  1557. Once the underlying issue is corrected, use the
  1558. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1559. config, and restart the host software.
  1560. Printer is shutdown
  1561.  
  1562. Lost communication with MCU 'mcu'
  1563. Once the underlying issue is corrected, use the
  1564. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1565. config, and restart the host software.
  1566. Printer is shutdown
  1567.  
  1568. Lost communication with MCU 'mcu'
  1569. Once the underlying issue is corrected, use the
  1570. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1571. config, and restart the host software.
  1572. Printer is shutdown
  1573.  
  1574. Lost communication with MCU 'mcu'
  1575. Once the underlying issue is corrected, use the
  1576. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1577. config, and restart the host software.
  1578. Printer is shutdown
  1579.  
  1580. Lost communication with MCU 'mcu'
  1581. Once the underlying issue is corrected, use the
  1582. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1583. config, and restart the host software.
  1584. Printer is shutdown
  1585.  
  1586. Lost communication with MCU 'mcu'
  1587. Once the underlying issue is corrected, use the
  1588. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1589. config, and restart the host software.
  1590. Printer is shutdown
  1591.  
  1592. Lost communication with MCU 'mcu'
  1593. Once the underlying issue is corrected, use the
  1594. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1595. config, and restart the host software.
  1596. Printer is shutdown
  1597.  
  1598. Lost communication with MCU 'mcu'
  1599. Once the underlying issue is corrected, use the
  1600. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1601. config, and restart the host software.
  1602. Printer is shutdown
  1603.  
  1604. Lost communication with MCU 'mcu'
  1605. Once the underlying issue is corrected, use the
  1606. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1607. config, and restart the host software.
  1608. Printer is shutdown
  1609.  
  1610. Lost communication with MCU 'mcu'
  1611. Once the underlying issue is corrected, use the
  1612. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1613. config, and restart the host software.
  1614. Printer is shutdown
  1615.  
  1616. Stats 849.0: gcodein=1093 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=79 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1617. Lost communication with MCU 'mcu'
  1618. Once the underlying issue is corrected, use the
  1619. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1620. config, and restart the host software.
  1621. Printer is shutdown
  1622.  
  1623. Lost communication with MCU 'mcu'
  1624. Once the underlying issue is corrected, use the
  1625. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1626. config, and restart the host software.
  1627. Printer is shutdown
  1628.  
  1629. Lost communication with MCU 'mcu'
  1630. Once the underlying issue is corrected, use the
  1631. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1632. config, and restart the host software.
  1633. Printer is shutdown
  1634.  
  1635. Lost communication with MCU 'mcu'
  1636. Once the underlying issue is corrected, use the
  1637. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1638. config, and restart the host software.
  1639. Printer is shutdown
  1640.  
  1641. Lost communication with MCU 'mcu'
  1642. Once the underlying issue is corrected, use the
  1643. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1644. config, and restart the host software.
  1645. Printer is shutdown
  1646.  
  1647. Lost communication with MCU 'mcu'
  1648. Once the underlying issue is corrected, use the
  1649. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1650. config, and restart the host software.
  1651. Printer is shutdown
  1652.  
  1653. Lost communication with MCU 'mcu'
  1654. Once the underlying issue is corrected, use the
  1655. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1656. config, and restart the host software.
  1657. Printer is shutdown
  1658.  
  1659. Lost communication with MCU 'mcu'
  1660. Once the underlying issue is corrected, use the
  1661. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1662. config, and restart the host software.
  1663. Printer is shutdown
  1664.  
  1665. Lost communication with MCU 'mcu'
  1666. Once the underlying issue is corrected, use the
  1667. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1668. config, and restart the host software.
  1669. Printer is shutdown
  1670.  
  1671. Lost communication with MCU 'mcu'
  1672. Once the underlying issue is corrected, use the
  1673. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1674. config, and restart the host software.
  1675. Printer is shutdown
  1676.  
  1677. Lost communication with MCU 'mcu'
  1678. Once the underlying issue is corrected, use the
  1679. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1680. config, and restart the host software.
  1681. Printer is shutdown
  1682.  
  1683. Lost communication with MCU 'mcu'
  1684. Once the underlying issue is corrected, use the
  1685. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1686. config, and restart the host software.
  1687. Printer is shutdown
  1688.  
  1689. Lost communication with MCU 'mcu'
  1690. Once the underlying issue is corrected, use the
  1691. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1692. config, and restart the host software.
  1693. Printer is shutdown
  1694.  
  1695. Lost communication with MCU 'mcu'
  1696. Once the underlying issue is corrected, use the
  1697. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1698. config, and restart the host software.
  1699. Printer is shutdown
  1700.  
  1701. Lost communication with MCU 'mcu'
  1702. Once the underlying issue is corrected, use the
  1703. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1704. config, and restart the host software.
  1705. Printer is shutdown
  1706.  
  1707. Lost communication with MCU 'mcu'
  1708. Once the underlying issue is corrected, use the
  1709. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1710. config, and restart the host software.
  1711. Printer is shutdown
  1712.  
  1713. Lost communication with MCU 'mcu'
  1714. Once the underlying issue is corrected, use the
  1715. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1716. config, and restart the host software.
  1717. Printer is shutdown
  1718.  
  1719. Lost communication with MCU 'mcu'
  1720. Once the underlying issue is corrected, use the
  1721. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1722. config, and restart the host software.
  1723. Printer is shutdown
  1724.  
  1725. Lost communication with MCU 'mcu'
  1726. Once the underlying issue is corrected, use the
  1727. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1728. config, and restart the host software.
  1729. Printer is shutdown
  1730.  
  1731. Lost communication with MCU 'mcu'
  1732. Once the underlying issue is corrected, use the
  1733. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1734. config, and restart the host software.
  1735. Printer is shutdown
  1736.  
  1737. Lost communication with MCU 'mcu'
  1738. Once the underlying issue is corrected, use the
  1739. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1740. config, and restart the host software.
  1741. Printer is shutdown
  1742.  
  1743. Lost communication with MCU 'mcu'
  1744. Once the underlying issue is corrected, use the
  1745. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1746. config, and restart the host software.
  1747. Printer is shutdown
  1748.  
  1749. Lost communication with MCU 'mcu'
  1750. Once the underlying issue is corrected, use the
  1751. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1752. config, and restart the host software.
  1753. Printer is shutdown
  1754.  
  1755. Lost communication with MCU 'mcu'
  1756. Once the underlying issue is corrected, use the
  1757. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1758. config, and restart the host software.
  1759. Printer is shutdown
  1760.  
  1761. Lost communication with MCU 'mcu'
  1762. Once the underlying issue is corrected, use the
  1763. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1764. config, and restart the host software.
  1765. Printer is shutdown
  1766.  
  1767. Lost communication with MCU 'mcu'
  1768. Once the underlying issue is corrected, use the
  1769. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1770. config, and restart the host software.
  1771. Printer is shutdown
  1772.  
  1773. Lost communication with MCU 'mcu'
  1774. Once the underlying issue is corrected, use the
  1775. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1776. config, and restart the host software.
  1777. Printer is shutdown
  1778.  
  1779. Lost communication with MCU 'mcu'
  1780. Once the underlying issue is corrected, use the
  1781. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1782. config, and restart the host software.
  1783. Printer is shutdown
  1784.  
  1785. Lost communication with MCU 'mcu'
  1786. Once the underlying issue is corrected, use the
  1787. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1788. config, and restart the host software.
  1789. Printer is shutdown
  1790.  
  1791. Lost communication with MCU 'mcu'
  1792. Once the underlying issue is corrected, use the
  1793. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1794. config, and restart the host software.
  1795. Printer is shutdown
  1796.  
  1797. Lost communication with MCU 'mcu'
  1798. Once the underlying issue is corrected, use the
  1799. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1800. config, and restart the host software.
  1801. Printer is shutdown
  1802.  
  1803. Lost communication with MCU 'mcu'
  1804. Once the underlying issue is corrected, use the
  1805. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1806. config, and restart the host software.
  1807. Printer is shutdown
  1808.  
  1809. Lost communication with MCU 'mcu'
  1810. Once the underlying issue is corrected, use the
  1811. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1812. config, and restart the host software.
  1813. Printer is shutdown
  1814.  
  1815. Lost communication with MCU 'mcu'
  1816. Once the underlying issue is corrected, use the
  1817. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1818. config, and restart the host software.
  1819. Printer is shutdown
  1820.  
  1821. Lost communication with MCU 'mcu'
  1822. Once the underlying issue is corrected, use the
  1823. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1824. config, and restart the host software.
  1825. Printer is shutdown
  1826.  
  1827. Lost communication with MCU 'mcu'
  1828. Once the underlying issue is corrected, use the
  1829. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1830. config, and restart the host software.
  1831. Printer is shutdown
  1832.  
  1833. Lost communication with MCU 'mcu'
  1834. Once the underlying issue is corrected, use the
  1835. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1836. config, and restart the host software.
  1837. Printer is shutdown
  1838.  
  1839. Lost communication with MCU 'mcu'
  1840. Once the underlying issue is corrected, use the
  1841. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1842. config, and restart the host software.
  1843. Printer is shutdown
  1844.  
  1845. Lost communication with MCU 'mcu'
  1846. Once the underlying issue is corrected, use the
  1847. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1848. config, and restart the host software.
  1849. Printer is shutdown
  1850.  
  1851. Lost communication with MCU 'mcu'
  1852. Once the underlying issue is corrected, use the
  1853. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1854. config, and restart the host software.
  1855. Printer is shutdown
  1856.  
  1857. Lost communication with MCU 'mcu'
  1858. Once the underlying issue is corrected, use the
  1859. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1860. config, and restart the host software.
  1861. Printer is shutdown
  1862.  
  1863. Stats 850.0: gcodein=1396 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=80 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  1864. Lost communication with MCU 'mcu'
  1865. Once the underlying issue is corrected, use the
  1866. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1867. config, and restart the host software.
  1868. Printer is shutdown
  1869.  
  1870. Lost communication with MCU 'mcu'
  1871. Once the underlying issue is corrected, use the
  1872. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1873. config, and restart the host software.
  1874. Printer is shutdown
  1875.  
  1876. Lost communication with MCU 'mcu'
  1877. Once the underlying issue is corrected, use the
  1878. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1879. config, and restart the host software.
  1880. Printer is shutdown
  1881.  
  1882. Lost communication with MCU 'mcu'
  1883. Once the underlying issue is corrected, use the
  1884. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1885. config, and restart the host software.
  1886. Printer is shutdown
  1887.  
  1888. Lost communication with MCU 'mcu'
  1889. Once the underlying issue is corrected, use the
  1890. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1891. config, and restart the host software.
  1892. Printer is shutdown
  1893.  
  1894. Lost communication with MCU 'mcu'
  1895. Once the underlying issue is corrected, use the
  1896. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1897. config, and restart the host software.
  1898. Printer is shutdown
  1899.  
  1900. Lost communication with MCU 'mcu'
  1901. Once the underlying issue is corrected, use the
  1902. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1903. config, and restart the host software.
  1904. Printer is shutdown
  1905.  
  1906. Lost communication with MCU 'mcu'
  1907. Once the underlying issue is corrected, use the
  1908. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1909. config, and restart the host software.
  1910. Printer is shutdown
  1911.  
  1912. Lost communication with MCU 'mcu'
  1913. Once the underlying issue is corrected, use the
  1914. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1915. config, and restart the host software.
  1916. Printer is shutdown
  1917.  
  1918. Lost communication with MCU 'mcu'
  1919. Once the underlying issue is corrected, use the
  1920. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1921. config, and restart the host software.
  1922. Printer is shutdown
  1923.  
  1924. Lost communication with MCU 'mcu'
  1925. Once the underlying issue is corrected, use the
  1926. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1927. config, and restart the host software.
  1928. Printer is shutdown
  1929.  
  1930. Lost communication with MCU 'mcu'
  1931. Once the underlying issue is corrected, use the
  1932. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1933. config, and restart the host software.
  1934. Printer is shutdown
  1935.  
  1936. Lost communication with MCU 'mcu'
  1937. Once the underlying issue is corrected, use the
  1938. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1939. config, and restart the host software.
  1940. Printer is shutdown
  1941.  
  1942. Lost communication with MCU 'mcu'
  1943. Once the underlying issue is corrected, use the
  1944. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1945. config, and restart the host software.
  1946. Printer is shutdown
  1947.  
  1948. Lost communication with MCU 'mcu'
  1949. Once the underlying issue is corrected, use the
  1950. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1951. config, and restart the host software.
  1952. Printer is shutdown
  1953.  
  1954. Lost communication with MCU 'mcu'
  1955. Once the underlying issue is corrected, use the
  1956. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1957. config, and restart the host software.
  1958. Printer is shutdown
  1959.  
  1960. Lost communication with MCU 'mcu'
  1961. Once the underlying issue is corrected, use the
  1962. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1963. config, and restart the host software.
  1964. Printer is shutdown
  1965.  
  1966. Lost communication with MCU 'mcu'
  1967. Once the underlying issue is corrected, use the
  1968. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1969. config, and restart the host software.
  1970. Printer is shutdown
  1971.  
  1972. Lost communication with MCU 'mcu'
  1973. Once the underlying issue is corrected, use the
  1974. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1975. config, and restart the host software.
  1976. Printer is shutdown
  1977.  
  1978. Lost communication with MCU 'mcu'
  1979. Once the underlying issue is corrected, use the
  1980. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1981. config, and restart the host software.
  1982. Printer is shutdown
  1983.  
  1984. Lost communication with MCU 'mcu'
  1985. Once the underlying issue is corrected, use the
  1986. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1987. config, and restart the host software.
  1988. Printer is shutdown
  1989.  
  1990. Lost communication with MCU 'mcu'
  1991. Once the underlying issue is corrected, use the
  1992. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1993. config, and restart the host software.
  1994. Printer is shutdown
  1995.  
  1996. Lost communication with MCU 'mcu'
  1997. Once the underlying issue is corrected, use the
  1998. "FIRMWARE_RESTART" command to reset the firmware, reload the
  1999. config, and restart the host software.
  2000. Printer is shutdown
  2001.  
  2002. Lost communication with MCU 'mcu'
  2003. Once the underlying issue is corrected, use the
  2004. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2005. config, and restart the host software.
  2006. Printer is shutdown
  2007.  
  2008. Lost communication with MCU 'mcu'
  2009. Once the underlying issue is corrected, use the
  2010. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2011. config, and restart the host software.
  2012. Printer is shutdown
  2013.  
  2014. Lost communication with MCU 'mcu'
  2015. Once the underlying issue is corrected, use the
  2016. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2017. config, and restart the host software.
  2018. Printer is shutdown
  2019.  
  2020. Lost communication with MCU 'mcu'
  2021. Once the underlying issue is corrected, use the
  2022. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2023. config, and restart the host software.
  2024. Printer is shutdown
  2025.  
  2026. Lost communication with MCU 'mcu'
  2027. Once the underlying issue is corrected, use the
  2028. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2029. config, and restart the host software.
  2030. Printer is shutdown
  2031.  
  2032. Lost communication with MCU 'mcu'
  2033. Once the underlying issue is corrected, use the
  2034. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2035. config, and restart the host software.
  2036. Printer is shutdown
  2037.  
  2038. Lost communication with MCU 'mcu'
  2039. Once the underlying issue is corrected, use the
  2040. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2041. config, and restart the host software.
  2042. Printer is shutdown
  2043.  
  2044. Lost communication with MCU 'mcu'
  2045. Once the underlying issue is corrected, use the
  2046. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2047. config, and restart the host software.
  2048. Printer is shutdown
  2049.  
  2050. Lost communication with MCU 'mcu'
  2051. Once the underlying issue is corrected, use the
  2052. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2053. config, and restart the host software.
  2054. Printer is shutdown
  2055.  
  2056. Lost communication with MCU 'mcu'
  2057. Once the underlying issue is corrected, use the
  2058. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2059. config, and restart the host software.
  2060. Printer is shutdown
  2061.  
  2062. Lost communication with MCU 'mcu'
  2063. Once the underlying issue is corrected, use the
  2064. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2065. config, and restart the host software.
  2066. Printer is shutdown
  2067.  
  2068. Lost communication with MCU 'mcu'
  2069. Once the underlying issue is corrected, use the
  2070. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2071. config, and restart the host software.
  2072. Printer is shutdown
  2073.  
  2074. Lost communication with MCU 'mcu'
  2075. Once the underlying issue is corrected, use the
  2076. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2077. config, and restart the host software.
  2078. Printer is shutdown
  2079.  
  2080. Lost communication with MCU 'mcu'
  2081. Once the underlying issue is corrected, use the
  2082. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2083. config, and restart the host software.
  2084. Printer is shutdown
  2085.  
  2086. Lost communication with MCU 'mcu'
  2087. Once the underlying issue is corrected, use the
  2088. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2089. config, and restart the host software.
  2090. Printer is shutdown
  2091.  
  2092. Lost communication with MCU 'mcu'
  2093. Once the underlying issue is corrected, use the
  2094. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2095. config, and restart the host software.
  2096. Printer is shutdown
  2097.  
  2098. Stats 851.0: gcodein=1689 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=81 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2099. Lost communication with MCU 'mcu'
  2100. Once the underlying issue is corrected, use the
  2101. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2102. config, and restart the host software.
  2103. Printer is shutdown
  2104.  
  2105. Stats 852.0: gcodein=1693 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=82 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2106. Lost communication with MCU 'mcu'
  2107. Once the underlying issue is corrected, use the
  2108. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2109. config, and restart the host software.
  2110. Printer is shutdown
  2111.  
  2112. Stats 853.0: gcodein=1702 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=83 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2113. Lost communication with MCU 'mcu'
  2114. Once the underlying issue is corrected, use the
  2115. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2116. config, and restart the host software.
  2117. Printer is shutdown
  2118.  
  2119. Stats 854.0: gcodein=1706 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=84 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2120. Lost communication with MCU 'mcu'
  2121. Once the underlying issue is corrected, use the
  2122. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2123. config, and restart the host software.
  2124. Printer is shutdown
  2125.  
  2126. Stats 855.0: gcodein=1710 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=85 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2127. Lost communication with MCU 'mcu'
  2128. Once the underlying issue is corrected, use the
  2129. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2130. config, and restart the host software.
  2131. Printer is shutdown
  2132.  
  2133. Stats 856.0: gcodein=1714 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=86 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2134. Lost communication with MCU 'mcu'
  2135. Once the underlying issue is corrected, use the
  2136. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2137. config, and restart the host software.
  2138. Printer is shutdown
  2139.  
  2140. Stats 857.0: gcodein=1718 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=87 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2141. Lost communication with MCU 'mcu'
  2142. Once the underlying issue is corrected, use the
  2143. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2144. config, and restart the host software.
  2145. Printer is shutdown
  2146.  
  2147. Stats 858.0: gcodein=1727 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=88 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2148. Lost communication with MCU 'mcu'
  2149. Once the underlying issue is corrected, use the
  2150. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2151. config, and restart the host software.
  2152. Printer is shutdown
  2153.  
  2154. Stats 859.0: gcodein=1736 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=89 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2155. Lost communication with MCU 'mcu'
  2156. Once the underlying issue is corrected, use the
  2157. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2158. config, and restart the host software.
  2159. Printer is shutdown
  2160.  
  2161. Stats 860.0: gcodein=1745 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=90 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2162. Lost communication with MCU 'mcu'
  2163. Once the underlying issue is corrected, use the
  2164. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2165. config, and restart the host software.
  2166. Printer is shutdown
  2167.  
  2168. Stats 861.0: gcodein=1754 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=91 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2169. Lost communication with MCU 'mcu'
  2170. Once the underlying issue is corrected, use the
  2171. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2172. config, and restart the host software.
  2173. Printer is shutdown
  2174.  
  2175. Stats 862.0: gcodein=1763 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=92 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2176. Lost communication with MCU 'mcu'
  2177. Once the underlying issue is corrected, use the
  2178. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2179. config, and restart the host software.
  2180. Printer is shutdown
  2181.  
  2182. Stats 863.0: gcodein=1772 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=93 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2183. Lost communication with MCU 'mcu'
  2184. Once the underlying issue is corrected, use the
  2185. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2186. config, and restart the host software.
  2187. Printer is shutdown
  2188.  
  2189. Stats 864.0: gcodein=1781 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=94 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2190. Lost communication with MCU 'mcu'
  2191. Once the underlying issue is corrected, use the
  2192. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2193. config, and restart the host software.
  2194. Printer is shutdown
  2195.  
  2196. Stats 865.0: gcodein=1790 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=95 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2197. Lost communication with MCU 'mcu'
  2198. Once the underlying issue is corrected, use the
  2199. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2200. config, and restart the host software.
  2201. Printer is shutdown
  2202.  
  2203. Stats 866.0: gcodein=1799 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=96 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2204. Lost communication with MCU 'mcu'
  2205. Once the underlying issue is corrected, use the
  2206. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2207. config, and restart the host software.
  2208. Printer is shutdown
  2209.  
  2210. Stats 867.0: gcodein=1808 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=97 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2211. Lost communication with MCU 'mcu'
  2212. Once the underlying issue is corrected, use the
  2213. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2214. config, and restart the host software.
  2215. Printer is shutdown
  2216.  
  2217. Stats 868.0: gcodein=1817 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=99 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2218. Lost communication with MCU 'mcu'
  2219. Once the underlying issue is corrected, use the
  2220. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2221. config, and restart the host software.
  2222. Printer is shutdown
  2223.  
  2224. Stats 869.0: gcodein=1826 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=100 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2225. Lost communication with MCU 'mcu'
  2226. Once the underlying issue is corrected, use the
  2227. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2228. config, and restart the host software.
  2229. Printer is shutdown
  2230.  
  2231. Stats 870.0: gcodein=1835 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=101 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2232. Lost communication with MCU 'mcu'
  2233. Once the underlying issue is corrected, use the
  2234. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2235. config, and restart the host software.
  2236. Printer is shutdown
  2237.  
  2238. Stats 871.0: gcodein=1844 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=102 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2239. Lost communication with MCU 'mcu'
  2240. Once the underlying issue is corrected, use the
  2241. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2242. config, and restart the host software.
  2243. Printer is shutdown
  2244.  
  2245. Stats 872.0: gcodein=1853 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=103 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2246. Lost communication with MCU 'mcu'
  2247. Once the underlying issue is corrected, use the
  2248. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2249. config, and restart the host software.
  2250. Printer is shutdown
  2251.  
  2252. Stats 873.0: gcodein=1862 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=104 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2253. Lost communication with MCU 'mcu'
  2254. Once the underlying issue is corrected, use the
  2255. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2256. config, and restart the host software.
  2257. Printer is shutdown
  2258.  
  2259. Stats 874.0: gcodein=1871 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=105 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2260. Lost communication with MCU 'mcu'
  2261. Once the underlying issue is corrected, use the
  2262. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2263. config, and restart the host software.
  2264. Printer is shutdown
  2265.  
  2266. Stats 875.0: gcodein=1880 mcu: mcu_awake=0.016 mcu_task_avg=0.000129 mcu_task_stddev=0.000131 bytes_write=16139 bytes_read=22867 bytes_retransmit=1994 bytes_invalid=116 send_seq=740 receive_seq=740 retransmit_seq=634 srtt=0.009 rttvar=0.005 rto=0.029 ready_bytes=0 stalled_bytes=106 freq=15868731 heater_bed: target=45 temp=45.3 pwm=0.052 print_time=239.292 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.0 pwm=0.364
  2267. Lost communication with MCU 'mcu'
  2268. Once the underlying issue is corrected, use the
  2269. "FIRMWARE_RESTART" command to reset the firmware, reload the
  2270. config, and restart the host software.
  2271. Printer is shutdown
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!