####################################################################################################
# +----------------------------------------------------------------------------------------------+ #
# |                                   __         __   ___  __         __                         | #
# |                        |    |  | /  ` |__/  |__) |__  |__)  |\/| /__`                        | #
# |                        |___ \__/ \__, |  \  |    |___ |  \  |  | .__/                        | #
# |                                                                                              | #
# |                                                                                              | #
# |  SOURCE CODE: https://github.com/lucko/LuckPerms                                             | #
# |  WIKI:        https://github.com/lucko/LuckPerms/wiki                                        | #
# |  BUG REPORTS: https://github.com/lucko/LuckPerms/issues                                      | #
# |                                                                                              | #
# |  Each option in this file is documented and explained here:                                  | #
# |   ==>  https://github.com/lucko/LuckPerms/wiki/Configuration                                 | #
# |                                                                                              | #
# |  New options are not added to this file automatically. Default values are used if an         | #
# |  option cannot be found. The latest config versions can be obtained at the link above.       | #
# +----------------------------------------------------------------------------------------------+ #
####################################################################################################

# +----------------------------------------------------------------------------------------------+ #
# |                                            General                                           | #
# +----------------------------------------------------------------------------------------------+ #

# The name of the server, used for server specific permissions. Set to 'global' to disable.
server: towny

# If users on this server should have their global permissions applied.
# If set to false, only server specific permissions will apply for users on this server
include-global: true

# If users on this server should have their global world permissions applied.
# If set to false, only world specific permissions will apply for users on this server
include-global-world: true

# If users on this server should have global (non-server specific) groups applied
apply-global-groups: true

# If users on this server should have global (non-world specific) groups applied
apply-global-world-groups: true

# If UUIDs should be pulled from the server, or looked up by username based upon previous
# connections.
#
# This option should be set to true in most cases. When set to false, in order to get a player's
# UUID, LuckPerms will:
#
# 1. Check if a player with the given username has joined before, if they have, use the UUID they
#    used on their previous login.
# 2. Save and return the players "current" uuid.
#
# For offline mode (cracked) servers, a players UUID is generated based upon their username.
#
# IMPORTANT:
# If you are using BungeeCord proxy running in online mode, it is important that "online-mode=false"
# is set in server.properties, but "bungeecord: true" is set in the spigot.yml. You also need to set
# "ip_forward: true" in BungeeCord's config.yml.
#
# If for whatever reason you are not able to do this, and do not have ip-forward enabled, then you
# may need to set "use-server-uuids" to false.
#
# If your proxy is running in offline mode, you should still be setting up ip-forwarding as
# described above, but may also find that you need to set "bungee-online-mode" to false in
# paper.yml, if you are using Paper. (https://ci.destroystokyo.com/job/PaperSpigot/)
#
# This option only really exists for networks who for whatever reason cannot setup proper ip
# forwarding.
use-server-uuids: true

# If the plugin should send log notifications to users whenever permissions are modified.
log-notify: true

# Mirrors world names. Whenever LuckPerms checks what world a user is in, if the world name is in
# this list, the value assigned will be sent forward for permission calculation instead.
world-rewrite:
#  world_nether: world
#  world_the_end: world

# Rewrites group names. The underlying name of the group does not change, just the output in
# commands / placeholders / Vault.
group-name-rewrite:
  default: usuario

# Controls how temporary permissions/parents/meta should be accumulated
#
# The default behaviour is "deny"
# If "accumulate": durations will be added to the existing expiry time
# If "replace": durations will be replaced if the new duration is later than the current expiration
# If "deny": the command will just fail if you try to add another node with the same expiry
temporary-add-behaviour: deny

# How should LuckPerms determine a users "primary" group.
#
# Available Options:
# -> stored                 use the value stored against the users record in the file/database
# -> parents-by-weight      just use the users most highly weighted parent
# -> all-parents-by-weight  same as above, but calculates based upon all parents inherited from both
#                           directly and indirectly
primary-group-calculation: parents-by-weight




# +----------------------------------------------------------------------------------------------+ #
# |                                    Permission Calculation                                    | #
# +----------------------------------------------------------------------------------------------+ #

# If the plugin should apply wildcard permissions.
# If set to true, LuckPerms will detect wildcard permissions, and resolve & apply all registered
# permissions matching the wildcard.
apply-wildcards: true

# If the plugin should parse regex permissions.
# If set to true, LuckPerms will detect regex permissions, marked with "r=" at the start of the
# node, and resolve & apply all registered permissions matching the regex.
apply-regex: true

# If the plugin should complete and apply shorthand permissions.
# If set to true, LuckPerms will detect and expand shorthand node patterns.
apply-shorthand: true

# If the plugin should apply Bukkit child permissions.
# Plugin authors can define custom permissions structures for their plugin, which will be resolved
# and used by LuckPerms if this setting is enabled.
apply-bukkit-child-permissions: true

# If the plugin should apply Bukkit default permissions.
# Plugin authors can define permissions which should be given to all users by default, or setup
# permissions which should/shouldn't be given to opped players.
# If this option is set to false, LuckPerms will ignore these defaults.
apply-bukkit-default-permissions: true

# If the plugin should apply attachment permissions.
# Other plugins on the server are able to add their own "permission attachments" to players. This
# allows them to grant players additional permissions which last until the end of the session, or
# until they're removed. If this option is set to false, LuckPerms will not include these attachment
# permissions when considering if a player should have access to a certain permission.
apply-bukkit-attachment-permissions: true

# Define special group weights for this server.
# Default is just 0.
group-weight:
  default: 1
  usuario: 1
  noble: 3
  vip2: 20
  vip: 21
  enamorados: 23
  vip3: 22
  youtube: 60
  leyenda: 50
  helper: 70
  moderador: 80
  smod: 90
  admin: 200






# +----------------------------------------------------------------------------------------------+ #
# |                                  Meta Formatting & Stacking                                  | #
# +----------------------------------------------------------------------------------------------+ #

# Allows you to setup prefix/suffix stacking options.
#
# Available formats:
# - highest
# - lowest
# - highest_own
# - lowest_own
# - highest_on_track_<track>
# - lowest_on_track_<track>
# - highest_not_on_track_<track>
# - lowest_not_on_track_<track>
#
# Each element is added in the order listed.
meta-formatting:
  prefix:
    format:
      - "highest"
    start-spacer: ""
    middle-spacer: " "
    end-spacer: ""
  suffix:
    format:
      - "highest"
    start-spacer: ""
    middle-spacer: " "
    end-spacer: ""




# +----------------------------------------------------------------------------------------------+ #
# |                                 OP (Server Operator) Settings                                | #
# +----------------------------------------------------------------------------------------------+ #

# If the vanilla OP system is enabled. If set to false, all users will be de-opped, and the op/deop
# commands will be disabled.
enable-ops: true

# If set to true, any user with the permission "luckperms.autoop" will automatically be granted
# server operator status. This permission can be inherited, or set on specific servers/worlds,
# temporarily, etc.
#
# Additionally, setting this to true will force the "enable-ops" option above to false. All users
# will be de-opped unless they have the permission node, and the op/deop commands will be disabled.
#
# It is important to note that this setting is only checked when a player first joins the server,
# and when they switch worlds. Therefore, simply removing this permission from a user will not
# automatically de-op them. A player needs to relog to have the change take effect.
#
# It is recommended that you use this option instead of assigning a single '*' permission.
auto-op: false

# If opped players should be allowed to use LuckPerms commands. Set to false to only allow users who
# have the permissions access to the commands
commands-allow-op: true




# +----------------------------------------------------------------------------------------------+ #
# |                                             Vault                                            | #
# +----------------------------------------------------------------------------------------------+ #

# If the vault-server option below should be used.
# When this option is set to false, the server value defined above under "server" is used.
use-vault-server: false

# The name of the server used within Vault operations. If you don't want Vault operations to be
# server specific, set this to "global".
#
# Will only take effect if use-vault-server is set to true above.
vault-server: global

# If global permissions should be considered when retrieving meta or player groups
vault-include-global: true

# If Vault operations should ignore any world arguments if supplied.
vault-ignore-world: false

# If LuckPerms should print debugging info to console when a plugin uses a Vault function
vault-debug: false




# +----------------------------------------------------------------------------------------------+ #
# |                                            Storage                                           | #
# +----------------------------------------------------------------------------------------------+ #

# Which storage method the plugin should use.
#
# See: https://github.com/lucko/LuckPerms/wiki/Choosing-a-Storage-type
# Currently supported: mysql, mariadb, postgresql, sqlite, h2, json, yaml, mongodb
#
# Fill out connection info below if you're using MySQL, MariaDB, PostgreSQL or MongoDB
# If your MySQL server supports it, the "mariadb" option is preferred over "mysql".
storage-method: mysql

# When using a file-based storage type, LuckPerms can monitor the data files for changes, and then
# schedule automatic updates when changes are detected.
#
# If you don't want this to happen, set this option to false.
watch-files: true

# This block enables support for split datastores.
split-storage:
  enabled: false
  methods:
    user: h2
    group: h2
    track: h2
    uuid: h2
    log: h2

data:
  # Uses standard DB engine port by default
  # MySQL: 3306, PostgreSQL: 5432, MongoDB: 27017
  # Specify as "host:port" if differs
  address: localhost

  database: xxxx
  username: root
  password: 'xxxx'
  pool-size: 10 # The size of the MySQL connection pool.

  # The prefix for all LuckPerms tables. Change this is you want to use different tables for
  # different servers.
  #
  # This should *not* be set to "lp_" if you have previously ran LuckPerms v2.16.81 or earlier with
  # this database.
  table_prefix: 'towny_'

  # The prefix to use for all LuckPerms collections. Change this if you want to use different
  # collections for different servers. The default is no prefix.
  mongodb_collection_prefix: ''

  # This option controls how frequently LuckPerms will perform a sync task.
  # A sync task will refresh all data from the storage, and ensure that the most up-to-date data is
  # being used by the plugin.
  #
  # This is disabled by default, as most users will not need it. However, if you're using a remote
  # storage type without a messaging service setup, you may wish to set this value to something like
  # 3.
  #
  # Set to -1 to disable the task completely.
  sync-minutes: -1

# Settings for the messaging service
#
# If enabled and configured, LuckPerms will use the messaging system to inform other
# connected servers of changes. Use the command "/luckperms networksync" to push changes.
# Data is NOT stored using this service. It is only used as a messaging platform.
#
# If you decide to enable this feature, you should set "sync-minutes" to -1, as there is no need for
# LuckPerms to poll the database for changes.
#
# Available options:
# -> bungee   uses the plugin messaging channels. Must be enabled on all connected servers to work.
# -> lilypad  uses lilypad pub sub to push changes. You need to have the LilyPad-Connect plugin
#             installed.
# -> redis    uses redis pub sub to push changes. Your redis server must be configured below.
# -> none     nothing
messaging-service: none

# If LuckPerms should automatically push updates after a change has been made with a command.
auto-push-updates: true

# Settings for Redis.
# Port 6379 is used by default; set address to "host:port" if differs
redis:
  enabled: false
  address: localhost
  password: ''




# +----------------------------------------------------------------------------------------------+ #
# |                                      Default Assignments                                     | #
# +----------------------------------------------------------------------------------------------+ #

# This section allows you to define defaults to give users whenever they connect to the server.
# The default assignments are highly configurable and conditional.
#
# There is one default assignment built into LuckPerms, which will add all users to the "default"
# group if they are not a member of any other group. This setting cannot be disabled. However, you
# can use this section to add more of your own.
#
# IMPORTANT:
# In order to save storage space, LuckPerms does not store users who have no permissions defined,
# and are only a member of the default group. Adding default assignments to this section will negate
# this effect. It is HIGHLY RECCOMENDED that instead of assigning defaults here, you add permissions
# to the "default" group, or set the "default" group to inherit other groups, and then use the
# group-name-rewrite rule above.
#
# It is also important to note that these rules are considered every time a player logs into the
# server, and are applied directly to the user's data. Simply removing a rule here will not reverse
# the effect of that rule on any users who have already had it applied to them.
#
# The "has" and "lacks" conditions below support standard boolean logic, using the 'and' & 'or'
# characters used in Java.
# e.g. "(some.other.permission | some.permission.other) & some.thing.else" == a user has
# 'some.other.permission', or 'some.permission.other', and they also have 'some.thing.else'
#
# Groups are represented by the permission node: group.<group name>
# Per server and per world nodes are represented by "server-world/permission" or "server/permission"
#
# Within conditions, permission nodes MUST be escaped using "<" and ">". See the example below.
#
# Explanation of the examples below: (they're just to demonstrate the features & use cases)
#
# rule1:
# If a user is either in the vip or vip+ group, and they have the "titles.titlecollector" permission
# set to true, and the "some.random.permission" set to false... if they're not in the group
# "prison_titlepack" on the "prison" server, then give add them to the "prison_titlepack" group on
# the "prison" server, and remove "some.random.permission".
#
# rule2:
# If the user isn't in any of the following groups on the skyblock server: sb_level1, sb_level2,
# sb_level3, then add them to sb_level1 on the skyblock server.
#
# rule3:
# If the user is a member of the default group, remove them from default, add them to member, and
# set their primary group to member.
#
# WARNING: Unlike internal commands, this system does not ensure that a group exists before adding
# a user to it. It also does not unsure that a user is a member of a group before making that group
# their primary group.
#
# Before you use "give: group.<name>" or "set-primary-group", make sure that the group exists, and
# that the user is a member of the group.
default-assignments:
#  rule1:
#    if:
#      has-true: (<group.vip> | <group.vip+>) & <titles.tilecollector>
#      has-false: <some.random.permission>
#      lacks: <prison/group.prison_titlepack>
#    give:
#      - prison/group.prison_titlepack
#    take:
#      - some.random.permission
#  rule2:
#    if:
#      lacks: <skyblock/group.sb_level1> & <skyblock/group.sb_level2> & <skyblock/group.sb_level3>
#    give:
#      - skyblock/group.sb_level1
#  rule3:
#    if:
#      has-true: <group.default>
#    take:
#      - group.default
#    give:
#      - group.member
#    set-primary-group: member