Advertisement
me109zito

Untitled

Apr 10th, 2013
109
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.22 KB | None | 0 0
  1.  
  2.  
  3. 1.0.0 U-Boot 1.1.3 (Mar 16 2011 - 18:01:52) - SVN revision : 15534
  4.  
  5. Model: ASL-26564/ES
  6.  
  7. Board: Ralink APSoC DRAM: 32 MB
  8. config usb..
  9. Command "mdio": 0x8020aeb0 => 0x81fb6eb0
  10. Command "cp": 0x8020c758 => 0x81fb8758
  11. Command "erase": 0x8020c8a8 => 0x81fb88a8
  12. Command "go": 0x8020dc70 => 0x81fb9c70
  13. Command "reset": 0x8021c080 => 0x81fc8080
  14. Command "bootm": 0x8020e4e4 => 0x81fba4e4
  15. Command "tftpboot": 0x8020fdd0 => 0x81fbbdd0
  16. Command "printenv": 0x80210390 => 0x81fbc390
  17. Command "setenv": 0x80210f88 => 0x81fbcf88
  18. Command "saveenv": 0x802110f8 => 0x81fbd0f8
  19. Command "version": 0x80211220 => 0x81fbd220
  20. Command "help": 0x8021126c => 0x81fbd26c
  21. Command "?": 0x8021126c => 0x81fbd26c
  22. Command "httpsvr": 0x80215630 => 0x81fc1630
  23. Command "md": 0x80215b50 => 0x81fc1b50
  24. Command "mm": 0x80215e88 => 0x81fc1e88
  25. Command "nm": 0x80215ee0 => 0x81fc1ee0
  26. Command "mw": 0x80215f38 => 0x81fc1f38
  27. spi_wait_nsec: 5f
  28. spi device id: 1 20 18 3 1 (20180301)
  29. find flash: Sfl128p
  30. ============================================
  31. Ralink UBoot Version: 3.3 Alpha
  32. --------------------------------------------
  33. ASIC 3052_MP2 (Port5<->RvMII)
  34. DRAM component: 128 Mbits SDR
  35. DRAM bus: 32 bit
  36. Total memory: 32 MBytes
  37. Flash component: SPI Flash
  38. Date:Mar 16 2011 Time:18:01:52
  39. ============================================
  40. icache: sets:256, ways:4, linesz:32 ,total:32768
  41. dcache: sets:128, ways:4, linesz:32 ,total:16384
  42. ## Powering down port 0 ~ 4.
  43.  
  44. Please choose the operation:
  45. 1: Load system code to SDRAM via TFTP.
  46. 2: Load system code then write to Flash via TFTP.
  47. 3: Boot system code via Flash (default).
  48. 4: Entr boot command line interface.
  49. 9: Load Boot Loader code then write to Flash via TFTP. 0
  50.  
  51. 3: System Boot system code via Flash.
  52. ## Booting image at bf050000 ...
  53. ## Booting image from active region 1 at bf050000 ...
  54. Image Name: MIPS OpenWrt Linux-3.7.10
  55. Created: 2013-04-04 18:48:26 UTC
  56. Image Type: MIPS Linux Kernel Image (lzma compressed)
  57. Data Size: 916061 Bytes = 894.6 kB
  58. Load Address: 80000000
  59. Entry Point: 80000000
  60. Verifying Checksum ... OK
  61. Uncompressing Kernel Image ... OK
  62.  
  63. Starting kernel ...
  64.  
  65. [ 0.000000] Linux version 3.7.10 (ebensan@ubuntu) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #3 Thu Apr 4 19:48:04 WEST 2013
  66. [ 0.000000] bootconsole [early0] enabled
  67. [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
  68. [ 0.000000] Ralink RT3052 id:1 rev:3 running at 384.00 MHz
  69. [ 0.000000] Determined physical RAM map:
  70. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  71. [ 0.000000] Initrd not found or empty - disabling initrd
  72. [ 0.000000] Zone ranges:
  73. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  74. [ 0.000000] Movable zone start for each node
  75. [ 0.000000] Early memory node ranges
  76. [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
  77. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  78. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  79. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  80. [ 0.000000] Kernel command line: board=ASL26555 console=ttyS1,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),14976k(rootfs),15872k@0x50000(linux),64k@0xff0000(devdata)ro,64k@0xfd0000(cert)ro,64k@0xfe0000(langpack)ro board=ASL26555 console=ttyS1,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),14976k(rootfs),15872k@0x50000(linux),64k@0xff0000(devdata)ro,64k@0xfd0000(cert)ro,64k@0xfe0000(langpack)ro rootfstype=squashfs,jffs2
  81. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  82. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  83. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  84. [ 0.000000] __ex_table already sorted, skipping sort
  85. [ 0.000000] Writing ErrCtl register=0000840c
  86. [ 0.000000] Readback ErrCtl register=0000840c
  87. [ 0.000000] Memory: 29568k/32768k available (1970k kernel code, 3200k reserved, 480k data, 236k init, 0k highmem)
  88. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  89. [ 0.000000] NR_IRQS:48
  90. [ 0.000000] console [ttyS1] enabled, bootconsole disabled
  91. [ 0.000000] console [ttyS1] enabled, bootconsole disabled
  92. [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
  93. [ 0.090000] pid_max: default: 32768 minimum: 301
  94. [ 0.100000] Mount-cache hash table entries: 512
  95. [ 0.110000] NET: Registered protocol family 16
  96. [ 0.120000] MIPS: machine is Alpha ASL26555
  97. [ 0.150000] bio: create slab <bio-0> at 0
  98. [ 0.160000] Switching to clocksource MIPS
  99. [ 0.170000] NET: Registered protocol family 2
  100. [ 0.180000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  101. [ 0.200000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  102. [ 0.210000] TCP: Hash tables configured (established 1024 bind 1024)
  103. [ 0.220000] TCP: reno registered
  104. [ 0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  105. [ 0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  106. [ 0.250000] NET: Registered protocol family 1
  107. [ 0.300000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  108. [ 0.310000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  109. [ 0.330000] msgmni has been set to 57
  110. [ 0.340000] io scheduler noop registered
  111. [ 0.350000] io scheduler deadline registered (default)
  112. [ 0.360000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  113. [ 0.370000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
  114. [ 0.390000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
  115. [ 0.410000] ramips-spi ramips-spi.0: master is unqueued, this is deprecated
  116. [ 0.420000] m25p80 spi0.0: s25sl12801 (16384 Kbytes)
  117. [ 0.430000] 9 cmdlinepart partitions found on MTD device spi0.0
  118. [ 0.450000] Creating 9 MTD partitions on "spi0.0":
  119. [ 0.450000] 0x000000000000-0x000000030000 : "u-boot"
  120. [ 0.470000] 0x000000030000-0x000000040000 : "u-boot-env"
  121. [ 0.480000] 0x000000040000-0x000000050000 : "factory"
  122. [ 0.500000] 0x000000050000-0x000000130000 : "kernel"
  123. [ 0.510000] 0x000000130000-0x000000fd0000 : "rootfs"
  124. [ 0.520000] mtd: partition "rootfs" set to be root filesystem
  125. [ 0.540000] mtd: partition "rootfs_data" created automatically, ofs=340000, len=C90000
  126. [ 0.550000] 0x000000340000-0x000000fd0000 : "rootfs_data"
  127. [ 0.570000] 0x000000050000-0x000000fd0000 : "linux"
  128. [ 0.580000] 0x000000ff0000-0x000001000000 : "devdata"
  129. [ 0.590000] 0x000000fd0000-0x000000fe0000 : "cert"
  130. [ 0.610000] 0x000000fe0000-0x000000ff0000 : "langpack"
  131. [ 0.630000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
  132. [ 0.650000] TCP: cubic registered
  133. [ 0.650000] NET: Registered protocol family 17
  134. [ 0.660000] 8021q: 802.1Q VLAN Support v1.8
  135. [ 0.690000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  136. [ 0.700000] Freeing unused kernel memory: 236k freed
  137. [ 4.530000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
  138. [ 4.840000] Button Hotplug driver version 0.4.1
  139. - preinit -
  140. Press the [f] key and hit [enter] to enter failsafe mode
  141. - regular preinit -
  142. [ 8.880000] jffs2: notice: (395) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 24 of xref (0 dead, 14 orphan) found.
  143. switching to jffs2
  144. - init -
  145.  
  146. Please press Enter to activate this console. [ 11.990000] Compat-drivers backport release: compat-drivers-2013-01-21-1
  147. [ 12.010000] Backport based on wireless-testing.git master-2013-02-22
  148. [ 12.020000] compat.git: wireless-testing.git
  149. [ 12.070000] cfg80211: Calling CRDA to update world regulatory domain
  150. [ 12.080000] cfg80211: World regulatory domain updated:
  151. [ 12.090000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  152. [ 12.110000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  153. [ 12.120000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  154. [ 12.140000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  155. [ 12.150000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  156. [ 12.170000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  157. [ 12.740000] SCSI subsystem initialized
  158. [ 13.380000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
  159. [ 13.400000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2872, rf: 0008, rev: 0200.
  160. [ 14.300000] PPP generic driver version 2.4.2
  161. [ 14.730000] ip_tables: (C) 2000-2006 Netfilter Core Team
  162. [ 15.020000] NET: Registered protocol family 24
  163. [ 15.330000] nf_conntrack version 0.5.0 (465 buckets, 1860 max)
  164. [ 15.860000] ledtrig_usbdev: Unknown symbol usb_put_dev (err 0)
  165. [ 15.870000] ledtrig_usbdev: Unknown symbol usb_get_dev (err 0)
  166. [ 15.890000] ledtrig_usbdev: Unknown symbol usb_unregister_notify (err 0)
  167. [ 15.900000] ledtrig_usbdev: Unknown symbol usb_register_notify (err 0)
  168. [ 15.910000] ledtrig_usbdev: Unknown symbol usb_find_device_by_name (err 0)
  169. [ 15.970000] dwc_otg: Unknown symbol usb_calc_bus_time (err 0)
  170. [ 15.980000] dwc_otg: Unknown symbol usb_put_hcd (err 0)
  171. [ 15.990000] dwc_otg: Unknown symbol usb_hcd_giveback_urb (err 0)
  172. [ 16.000000] dwc_otg: Unknown symbol usb_create_hcd (err 0)
  173. [ 16.010000] dwc_otg: Unknown symbol usb_remove_hcd (err 0)
  174. [ 16.020000] dwc_otg: Unknown symbol usb_add_hcd (err 0)
  175. [ 16.220000] usb_storage: Unknown symbol usb_alloc_urb (err 0)
  176. [ 16.230000] usb_storage: Unknown symbol usb_free_urb (err 0)
  177. [ 16.240000] usb_storage: Unknown symbol usb_alloc_coherent (err 0)
  178. [ 16.250000] usb_storage: Unknown symbol usb_register_driver (err 0)
  179. [ 16.270000] usb_storage: Unknown symbol usb_sg_init (err 0)
  180. [ 16.280000] usb_storage: Unknown symbol usb_sg_cancel (err 0)
  181. [ 16.290000] usb_storage: Unknown symbol usb_reset_device (err 0)
  182. [ 16.300000] usb_storage: Unknown symbol usb_submit_urb (err 0)
  183. [ 16.310000] usb_storage: Unknown symbol usb_free_coherent (err 0)
  184. [ 16.330000] usb_storage: Unknown symbol usb_control_msg (err 0)
  185. [ 16.340000] usb_storage: Unknown symbol usb_deregister (err 0)
  186. [ 16.350000] usb_storage: Unknown symbol usb_lock_device_for_reset (err 0)
  187. [ 16.360000] usb_storage: Unknown symbol usb_unlink_urb (err 0)
  188. [ 16.370000] usb_storage: Unknown symbol usb_kill_urb (err 0)
  189. [ 16.390000] usb_storage: Unknown symbol usb_reset_endpoint (err 0)
  190. [ 16.400000] usb_storage: Unknown symbol usb_sg_wait (err 0)
  191. [ 21.280000] device eth0.1 entered promiscuous mode
  192. [ 21.290000] device eth0 entered promiscuous mode
  193. [ 21.320000] br-lan: port 1(eth0.1) entered forwarding state
  194. [ 21.330000] br-lan: port 1(eth0.1) entered forwarding state
  195. [ 21.700000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
  196. [ 23.330000] br-lan: port 1(eth0.1) entered forwarding state
  197. [ 28.310000] device wlan0 entered promiscuous mode
  198. [ 28.500000] br-lan: port 2(wlan0) entered forwarding state
  199. [ 28.510000] br-lan: port 2(wlan0) entered forwarding state
  200. [ 30.510000] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement