Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version 1.24 20191016
- In
- soft reset
- SRX
- channel 0
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- change freq to 416MHz 0,1
- Channel 0: LPDDR4,416MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- Channel 1: LPDDR4,416MHz
- Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
- 256B stride
- channel 0
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 1
- CS = 0
- MR0=0x18
- MR4=0x1
- MR5=0x1
- MR8=0x10
- MR12=0x72
- MR14=0x72
- MR18=0x0
- MR19=0x0
- MR24=0x8
- MR25=0x0
- channel 0 training pass!
- channel 1 training pass!
- channel 0, cs 0, advanced training done
- channel 1, cs 0, advanced training done
- change freq to 856MHz 1,0
- ch 0 ddrconfig = 0x101, ddrsize = 0x40
- ch 1 ddrconfig = 0x101, ddrsize = 0x40
- pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
- ddr_set_rate to 328MHZ
- ddr_set_rate to 666MHZ
- ddr_set_rate to 928MHZ
- channel 0, cs 0, advanced training done
- channel 1, cs 0, advanced training done
- ddr_set_rate to 416MHZ, ctl_index 0
- ddr_set_rate to 856MHZ, ctl_index 1
- support 416 856 328 666 928 MHz, current 856MHz
- OUT
- Boot1: 2019-03-14, version: 1.19
- CPUId = 0x0
- ChipType = 0x10, 323
- SdmmcInit=2 0
- BootCapSize=100000
- UserCapSize=14910MB
- FwPartOffset=2000 , 100000
- mmc0:cmd8,20
- mmc0:cmd5,20
- mmc0:cmd55,20
- mmc0:cmd1,20
- mmc0:cmd8,20
- mmc0:cmd5,20
- mmc0:cmd55,20
- mmc0:cmd1,20
- mmc0:cmd8,20
- mmc0:cmd5,20
- mmc0:cmd55,20
- mmc0:cmd1,20
- SdmmcInit=0 1
- StorageInit ok = 68834
- SecureMode = 0
- SecureInit read PBA: 0x4
- SecureInit read PBA: 0x404
- SecureInit read PBA: 0x804
- SecureInit read PBA: 0xc04
- SecureInit read PBA: 0x1004
- SecureInit read PBA: 0x1404
- SecureInit read PBA: 0x1804
- SecureInit read PBA: 0x1c04
- SecureInit ret = 0, SecureMode = 0
- atags_set_bootdev: ret:(0)
- GPT 0x3380ec0 signature is wrong
- recovery gpt...
- GPT 0x3380ec0 signature is wrong
- recovery gpt fail!
- LoadTrust Addr:0x4000
- No find bl30.bin
- No find bl32.bin
- Load uboot, ReadLba = 2000
- Load OK, addr=0x200000, size=0xdcfd8
- RunBL31 0x40000
- NOTICE: BL31: v1.3(debug):42583b6
- NOTICE: BL31: Built : 07:55:13, Oct 15 2019
- NOTICE: BL31: Rockchip release version: v1.1
- INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
- INFO: Using opteed sec cpu_context!
- INFO: boot cpu mask: 0
- INFO: plat_rockchip_pmu_init(1190): pd status 3e
- INFO: BL31: Initializing runtime services
- WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
- ERROR: Error initializing runtime service opteed_fast
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x200000
- INFO: SPSR = 0x3c9
- U-Boot 2020.07-armbian (Oct 13 2020 - 16:49:59 +0200)
- SoC: Rockchip rk3399
- Reset cause: WDOG
- DRAM: 3.9 GiB
- PMIC: RK808
- SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- MMC: mmc@fe320000: 1, sdhci@fe330000: 0
- Loading Environment from MMC... *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Model: Helios64
- Revision: 1.2 - 4GB non ECC
- Net: eth0: ethernet@fe300000
- scanning bus for devices...
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- switch to partitions #0, OK
- mmc0(part 0) is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3185 bytes read in 19 ms (163.1 KiB/s)
- ## Executing script at 00500000
- Boot script loaded from mmc 0
- 166 bytes read in 15 ms (10.7 KiB/s)
- 16807894 bytes read in 1621 ms (9.9 MiB/s)
- 29792768 bytes read in 2856 ms (9.9 MiB/s)
- 86670 bytes read in 42 ms (2 MiB/s)
- 2698 bytes read in 33 ms (79.1 KiB/s)
- Applying kernel provided DT fixup script (rockchip-fixup.scr)
- ## Executing script at 09000000
- ## Loading init Ramdisk from Legacy Image at 06000000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 16807830 Bytes = 16 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01f00000
- Booting using the fdt blob at 0x1f00000
- Loading Ramdisk to f4edf000, end f5ee6796 ... OK
- Loading Device Tree to 00000000f4e61000, end 00000000f4edefff ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 6.1.50-current-rockchip64 (armbian@next) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP PREEMPT Wed Aug 30 14:11:13 UTC 2023
- [ 0.000000] Machine model: Helios64
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xf77c2a80-0xf77c4fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
- [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
- [ 0.000000] cma: Reserved 128 MiB at 0x00000000e9000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 30 pages/cpu s82408 r8192 d32280 u122880
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] alternatives: applying boot alternatives
- [ 0.000000] Fallback order for Node 0: 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
- [ 0.000000] Policy zone: DMA
- [ 0.000000] Kernel command line: root=UUID=8fd10f19-b84f-46c4-975b-a07f40a388ba rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart=728863aa-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
- [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
- [ 0.000000] Unknown kernel command line parameters "ubootpart=728863aa-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000] Memory: 3805112K/4061184K available (16512K kernel code, 2278K rwdata, 6172K rodata, 3968K init, 585K bss, 125000K reserved, 131072K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] trace event string verifier disabled
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: GICv3 features: 16 PPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
- [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
- [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x00000000004e0000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004f0000
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
- [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
- [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.001539] Console: colour dummy device 80x25
- [ 0.002548] printk: console [tty1] enabled
- [ 0.002675] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.002723] pid_max: default: 32768 minimum: 301
- [ 0.002853] LSM: Security Framework initializing
- [ 0.002908] Yama: becoming mindful.
- [ 0.003078] AppArmor: AppArmor initialized
- [ 0.003136] Stack Depot allocating hash table of 262144 entries with kvcalloc
- [ 0.003884] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.003942] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.006145] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.007608] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.007643] cblist_init_generic: Setting shift to 3 and lim to 1.
- [ 0.007837] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.007868] cblist_init_generic: Setting shift to 3 and lim to 1.
- [ 0.008310] rcu: Hierarchical SRCU implementation.
- [ 0.008335] rcu: Max phase no-delay instances is 1000.
- [ 0.010205] Platform MSI: interrupt-controller@fee20000 domain created
- [ 0.010814] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
- [ 0.013176] EFI services will not be available.
- [ 0.014036] smp: Bringing up secondary CPUs ...
- [ 0.015248] Detected VIPT I-cache on CPU1
- [ 0.015402] cacheinfo: Unable to detect cache hierarchy for CPU 1
- [ 0.015425] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
- [ 0.015449] GICv3: CPU1: using allocated LPI pending table @0x0000000000580000
- [ 0.015516] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.016996] Detected VIPT I-cache on CPU2
- [ 0.017162] cacheinfo: Unable to detect cache hierarchy for CPU 2
- [ 0.017185] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
- [ 0.017210] GICv3: CPU2: using allocated LPI pending table @0x0000000000590000
- [ 0.017271] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.018723] Detected VIPT I-cache on CPU3
- [ 0.018889] cacheinfo: Unable to detect cache hierarchy for CPU 3
- [ 0.018914] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
- [ 0.018938] GICv3: CPU3: using allocated LPI pending table @0x00000000005a0000
- [ 0.019003] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.020503] CPU features: detected: Spectre-v2
- [ 0.020516] CPU features: detected: Spectre-v4
- [ 0.020522] CPU features: detected: Spectre-BHB
- [ 0.020530] CPU features: detected: ARM erratum 1742098
- [ 0.020538] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.020543] Detected PIPT I-cache on CPU4
- [ 0.020651] cacheinfo: Unable to detect cache hierarchy for CPU 4
- [ 0.020667] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
- [ 0.020686] GICv3: CPU4: using allocated LPI pending table @0x00000000005b0000
- [ 0.020729] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
- [ 0.022125] Detected PIPT I-cache on CPU5
- [ 0.022243] cacheinfo: Unable to detect cache hierarchy for CPU 5
- [ 0.022260] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
- [ 0.022280] GICv3: CPU5: using allocated LPI pending table @0x00000000005c0000
- [ 0.022324] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
- [ 0.022500] smp: Brought up 1 node, 6 CPUs
- [ 0.022981] SMP: Total of 6 ie
- [ 2.304684] NET: Registered PF_INET6 protocol family
- [ 2.336283] Segment Routing with IPv6
- [ 2.336703] In-situ OAM (IOAM) with IPv6
- [ 2.337153] NET: Registered PF_PACKET protocol family
- [ 2.337804] 8021q: 802.1Q VLAN Support v1.8
- [ 2.338258] Key type dns_resolver registered
- [ 2.340127] registered taskstats version 1
- [ 2.340566] Loading compiled-in X.509 certificates
- [ 2.346900] zswap: loaded using pool zstd/z3fold
- [ 2.348042] Key type .fscrypt registered
- [ 2.348430] Key type fscrypt-provisioning registered
- [ 2.351281] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
- [ 2.352340] Key type encrypted registered
- [ 2.352747] AppArmor: AppArmor sha1 policy hashing enabled
- [ 2.449929] pca953x 2-0020: using no AI
- [ 2.451810] ehci-platform fe380000.usb: EHCI Host Controller
- [ 2.451847] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
- [ 2.452347] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
- [ 2.452546] ehci-platform fe380000.usb: irq 58, io mem 0xfe380000
- [ 2.452630] rk808 0-001b: chip id: 0x0
- [ 2.453002] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 2
- [ 2.455488] ohci-platform fe3a0000.usb: irq 60, io mem 0xfe3a0000
- [ 2.456908] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 2.457497] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 2.458057] rk808-regulator rk808-regulator: max buck steps per change: 4
- [ 2.464086] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV
- [ 2.468416] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
- [ 2.469238] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
- [ 2.469988] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.470639] usb usb1: Product: EHCI Host Controller
- [ 2.471081] usb usb1: Manufacturer: Linux 6.1.50-current-rockchip64 ehci_hcd
- [ 2.471712] usb usb1: SerialNumber: fe380000.usb
- [ 2.472836] hub 1-0:1.0: USB hub found
- [ 2.473220] hub 1-0:1.0: 1 port detected
- [ 2.473374] rk808-rtc rk808-rtc: registered as rtc0
- [ 2.474583] rk808-rtc rk808-rtc: setting system clock to 2023-09-29T00:03:45 UTC (1695945825)
- [ 2.477804] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
- [ 2.478477] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
- [ 2.479080] dwmmc_rockchip fe320000.mmc: Version ID is 270a
- [ 2.479640] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 71,32 bit host data width,256 deep fifo
- [ 2.480989] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
- [ 2.481196] dwmmc_rockchip fe320000.mmc: Got CD GPIO
- [ 2.481665] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
- [ 2.482842] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
- [ 2.484237] rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms
- [ 2.494906] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 2.513561] rockchip-pcie f8000000.pcie: wait 0 ms (from device tree) before bus scan
- [ 2.514727] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
- [ 2.515329] pci_bus 0000:00: root bus resource [bus 00-1f]
- [ 2.515828] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
- [ 2.516465] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
- [ 2.516730] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
- [ 2.517364] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
- [ 2.518073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.518751] pci 0000:00:00.0: supports D1
- [ 2.519266] usb usb2: Product: Generic Platform OHCI controller
- [ 2.519279] usb usb2: Manufacturer: Linux 6.1.50-current-rockchip64 ohci_hcd
- [ 2.519628] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 2.519653] usb usb2: SerialNumber: fe3a0000.usb
- [ 2.520532] hub 2-0:1.0: USB hub found
- [ 2.522129] hub 2-0:1.0: 1 port detected
- [ 2.526509] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.527460] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601
- [ 2.528070] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
- [ 2.528722] pci 0000:01:00.0: reg 0x10: [io size 0x0080]
- [ 2.529244] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
- [ 2.529877] pci 0000:01:00.0: reg 0x14: [io size 0x0080]
- [ 2.530393] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
- [ 2.531025] pci 0000:01:00.0: reg 0x18: [io size 0x0080]
- [ 2.531540] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
- [ 2.532170] pci 0000:01:00.0: reg 0x1c: [io size 0x0080]
- [ 2.532701] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
- [ 2.533333] pci 0000:01:00.0: reg 0x20: [io size 0x0080]
- [ 2.533848] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
- [ 2.534440] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 2.535073] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
- [ 2.536052] pci 0000:01:00.0: PME# supported from D3hot
- [ 2.536788] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
- [ 2.538590] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
- [ 2.539213] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
- [ 2.539847] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
- [ 2.540517] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff]
- [ 2.541140] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080]
- [ 2.541705] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080]
- [ 2.542300] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080]
- [ 2.542862] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080]
- [ 2.543455] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080]
- [ 2.544018] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080]
- [ 2.544624] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080]
- [ 2.545190] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080]
- [ 2.545784] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080]
- [ 2.546348] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080]
- [ 2.546946] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.547402] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
- [ 2.548234] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
- [ 2.549142] pcieport 0000:00:00.0: PME: Signaling with IRQ 78
- [ 2.550088] pcieport 0000:00:00.0: AER: enabled with IRQ 78
- [ 2.550956] ahci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 2.552104] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
- [ 2.552821] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode
- [ 2.553564] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh
- [ 2.559575] scsi host0: ahci
- [ 2.560641] scsi host1: ahci
- [ 2.561547] scsi host2: ahci
- [ 2.562452] scsi host3: ahci
- [ 2.563393] scsi host4: ahci
- [ 2.563880] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 79
- [ 2.564575] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 80
- [ 2.565241] ata3:
- [ 3.044482] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.045270] ata1.00: ATA-11: NT-128, SN08979, max UDMA/133
- [ 3.045849] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA
- [ 3.046913] ata1.00: configured for UDMA/133
- [ 3.047970] scsi 0:0:0:0: Direct-Access ATA NT-128 979 PQ: 0 ANSI: 5
- [ 3.051208] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 3.051991] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.052672] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.053671] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
- [ 3.057623] sda: sda1
- [ 3.058344] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.660433] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 4.661506] ata2.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
- [ 4.662438] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 4.663709] ata2.00: configured for UDMA/133
- [ 4.664631] scsi 1:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
- [ 4.667475] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
- [ 4.668198] sd 1:0:0:0: [sdb] 4096-byte physical blocks
- [ 4.668783] sd 1:0:0:0: [sdb] Write Protect is off
- [ 4.669370] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.670368] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
- [ 4.705538] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 5.140434] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.141499] ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
- [ 5.142428] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA
- [ 5.143729] ata3.00: configured for UDMA/133
- [ 5.144694] scsi 2:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
- [ 5.147410] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
- [ 5.148118] sd 2:0:0:0: [sdc] 4096-byte physical blocks
- [ 5.148675] sd 2:0:0:0: [sdc] Write Protect is off
- [ 5.149212] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.150142] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
- [ 5.176105] sd 2:0:0:0: [sdc] Attached SCSI disk
- [ 5.463105] ata4: SATA link down (SStatus 0 SControl 300)
- [ 5.940469] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 5.941615] ata5.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
- [ 5.942892] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 5.944815] ata5.00: configured for UDMA/133
- [ 5.945798] scsi 4:0:0:0: Direct-Access ATA WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5
- [ 5.948805] sd 4:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
- [ 5.949525] sd 4:0:0:0: [sdd] 4096-byte physical blocks
- [ 5.950100] sd 4:0:0:0: [sdd] Write Protect is off
- [ 5.950730] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.951755] sd 4:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes
- [ 5.971820] sd 4:0:0:0: [sdd] Attached SCSI disk
- [ 5.974825] Freeing unused kernel memory: 3968K
- [ 5.975438] Run /init as init process
- [ 6.618837] input: adc-keys as /devices/platform/adc-keys/input/input1
- [ 6.827838] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
- [ 6.830541] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
- [ 6.831378] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
- [ 6.853452] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
- [ 6.854976] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
- [ 6.855529] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
- [ 6.856070] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
- [ 6.861852] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
- [ 6.893985] rk_gmac-dwmac fe300000.ethernet: init for RGMII
- [ 6.896527] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
- [ 6.897232] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
- [ 6.897720] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
- [ 6.898405] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
- [ 6.899088] rk_gmac-dwmac fe300000.ethernet: COE Type 2
- [ 6.899571] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
- [ 6.900212] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
- [ 6.954434] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
- [ 6.955016] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
- [ 6.955558] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
- [ 7.112923] async_tx: api initialized (async)
- [ 7.145800] md/raid:md0: not clean -- starting background reconstruction
- [ 7.146551] md/raid:md0: device sdd operational as raid disk 2
- [ 7.147093] md/raid:md0: device sdc operational as raid disk 1
- [ 7.147627] md/raid:md0: device sdb operational as raid disk 0
- [ 7.152106] md/raid:md0: raid level 5 active with 3 out of 3 devices, algorithm 2
- [ 7.209343] md0: detected capacity change from 0 to 15627544576
- [ 7.262042] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
- [ 7.262994] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
- [ 7.956309] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
- [ 8.952502] systemd[1]: Inserted module 'autofs4'
- [ 9.026407] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
- [ 9.030208] systemd[1]: Detected architecture arm64.
- [ 9.051724] systemd[1]: Set hostname to <helios64>.
- [ 9.112710] systemd[1]: Using hardware watchdog 'Synopsys DesignWare Watchdog', version 0, device /dev/watchdog
- [ 9.113686] systemd[1]: Set hardware watchdog to 21s.
- [ 9.243028] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
- [ 10.356397] random: crng init done
- [ 11.010621] systemd[1]: Queued start job for default target Graphical Interface.
- [ 11.033302] systemd[1]: Created slice system-getty.slice.
- [ 11.036874] systemd[1]: Created slice system-modprobe.slice.
- [ 11.040068] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 11.043621] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 11.046616] systemd[1]: Created slice User and Session Slice.
- [ 11.047472] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
- [ 11.049119] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 11.051069] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 11.052341] systemd[1]: Reached target Local Encrypted Volumes.
- [ 11.053555] systemd[1]: Reached target Slices.
- [ 11.054259] systemd[1]: Reached target Swap.
- [ 11.054921] systemd[1]: Reached target System Time Set.
- [ 11.056107] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 11.057682] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 11.087027] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 11.088915] systemd[1]: Listening on Syslog Socket.
- [ 11.090278] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 11.091500] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 11.093305] systemd[1]: Listening on Journal Audit Socket.
- [ 11.094679] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 11.096257] systemd[1]: Listening on Journal Socket.
- [ 11.097932] systemd[1]: Listening on Network Service Netlink Socket.
- [ 11.099605] systemd[1]: Listening on udev Control Socket.
- [ 11.100955] systemd[1]: Listening on udev Kernel Socket.
- [ 11.107775] systemd[1]: Mounting Huge Pages File System...
- [ 11.115205] systemd[1]: Mounting POSIX Message Queue File System...
- [ 11.122573] systemd[1]: Mounting NFSD configuration filesystem...
- [ 11.130290] systemd[1]: Mounting RPC Pipe File System...
- [ 11.138080] systemd[1]: Mounting Kernel Debug File System...
- [ 11.145736] systemd[1]: Mounting Kernel Trace File System...
- [ 11.147464] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
- [ 11.149126] systemd[1]: Finished Availability of block devices.
- [ 11.157925] systemd[1]: Starting Set the console keyboard layout...
- [ 11.166106] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 11.173928] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- [ 11.181643] systemd[1]: Starting Load Kernel Module configfs...
- [ 11.188366] systemd[1]: Starting Load Kernel Module drm...
- [ 11.195195] systemd[1]: Starting Load Kernel Module fuse...
- [ 11.201423] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
- [ 11.203687] RPC: Registered named UNIX socket transport module.
- [ 11.204246] RPC: Registered udp transport module.
- [ 11.204695] RPC: Registered tcp transport module.
- [ 11.205122] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 11.211280] systemd[1]: Started Nameserver information manager.
- [ 11.212701] systemd[1]: Reached target Network (Pre).
- [ 11.226447] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 11.227492] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 11.238660] systemd[1]: Starting Journal Service...
- [ 11.249778] systemd[1]: Starting Load Kernel Modules...
- [ 11.257951] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 11.268365] systemd[1]: Starting Coldplug All udev Devices...
- [ 11.298496] systemd[1]: Mounted Huge Pages File System.
- [ 11.299999] systemd[1]: Mounted POSIX Message Queue File System.
- [ 11.301593] systemd[1]: Mounted NFSD configuration filesystem.
- [ 11.302949] systemd[1]: Mounted RPC Pipe File System.
- [ 11.304227] systemd[1]: Mounted Kernel Debug File System.
- [ 11.305665] systemd[1]: Mounted Kernel Trace File System.
- [ 11.309123] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ 11.312067] systemd[1]: modprobe@configfs.service: Succeeded.
- [ 11.314726] systemd[1]: Finished Load Kernel Module configfs.
- [ 11.317516] systemd[1]: modprobe@drm.service: Succeeded.
- [ 11.319811] systemd[1]: Finished Load Kernel Module drm.
- [ 11.323157] systemd[1]: modprobe@fuse.service: Succeeded.
- [ 11.325512] systemd[1]: Finished Load Kernel Module fuse.
- [ 11.350264] EXT4-fs (sda1): re-mounted. Quota mode: none.
- [ 11.361650] systemd[1]: Mounting FUSE Control File System...
- [ 11.369951] systemd[1]: Mounting Kernel Configuration File System...
- [ 11.379340] lm75 2-004c: supply vs not found, using dummy regulator
- [ 11.379452] systemd[1]: Starting pNFS block layout mapping daemon...
- [ 11.382425] hwmon hwmon2: temp1_input not attached to any thermal zone
- [ 11.383077] lm75 2-004c: hwmon2: sensor 'lm75'
- [ 11.397296] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ 11.399847] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 11.400671] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
- [ 11.401943] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
- [ 11.404087] systemd[1]: Mounted FUSE Control File System.
- [ 11.407899] systemd[1]: Finished Load Kernel Modules.
- [ 11.409615] systemd[1]: Mounted Kernel Configuration File System.
- [ 11.413494] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 11.414695] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 11.424629] systemd[1]: Starting Load/Save Random Seed...
- [ 11.433243] systemd[1]: Starting Apply Kernel Variables...
- [ 11.441226] systemd[1]: Starting Create System Users...
- [ 11.444323] systemd[1]: Started pNFS block layout mapping daemon.
- [ 11.507480] systemd[1]: Finished Load/Save Random Seed.
- [ 11.513881] systemd[1]: Finished Apply Kernel Variables.
- [ 11.515934] systemd[1]: Condition check resulted in First Boot Complete being skipped.
- [ 11.553691] systemd[1]: Finished Create System Users.
- [ 11.594037] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 11.682955] systemd[1]: Started Journal Service.
- [ 11.782303] systemd-journald[431]: Received client request to flush runtime journal.
- [ 11.808796] systemd-journald[431]: File /var/log/journal/4d4f6d7f9df948e6afd380c743b4ba53/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 12.573304] mc: Linux media interface: v0.10
- [ 12.595899] input: beeper as /devices/platform/beeper/input/input2
- [ 12.602861] videodev: Linux video capture interface: v2.00
- [ 12.671040] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22
- [ 12.685493] rockchip-rga ff680000.rga: HW Version: 0x03.02
- [ 12.689524] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
- [ 12.692831] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
- [ 12.702140] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
- [ 12.719798] hantro-vpu ff650000.video-codec: Adding to iommu group 0
- [ 12.728488] rkvdec ff660000.video-codec: Adding to iommu group 1
- [ 12.739753] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video1
- [ 12.763089] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
- [ 12.763910] [drm] unsupported AFBC format[3231564e]
- [ 12.765397] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
- [ 12.766745] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
- [ 12.769279] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3
- [ 12.769500] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
- [ 12.781019] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
- [ 12.781769] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
- [ 12.784517] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
- [ 12.792429] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
- [ 12.793148] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
- [ 12.822318] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
- [ 12.883000] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 12.883819] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
- [ 12.884791] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
- [ 12.885690] xhci-hcd xhci-hcd.2.auto: irq 96, io mem 0xfe800000
- [ 12.886572] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
- [ 12.887103] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
- [ 12.887812] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed
- [ 12.888608] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
- [ 12.889365] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 12.890009] usb usb3: Product: xHCI Host Controller
- [ 12.890445] usb usb3: Manufacturer: Linux 6.1.50-current-rockchip64 xhci-hcd
- [ 12.891073] usb usb3: SerialNumber: xhci-hcd.2.auto
- [ 12.896938] hub 3-0:1.0: USB hub found
- [ 12.897393] hub 3-0:1.0: 1 port detected
- [ 12.911466] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 12.912503] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
- [ 12.913267] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 12.913916] usb usb4: Product: xHCI Host Controller
- [ 12.914357] usb usb4: Manufacturer: Linux 6.1.50-current-rockchip64 xhci-hcd
- [ 12.914987] usb usb4: SerialNumber: xhci-hcd.2.auto
- [ 12.928752] panfrost ff9a0000.gpu: clock rate = 500000000
- [ 12.941603] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
- [ 12.944309] hub 4-0:1.0: USB hub found
- [ 12.944812] hub 4-0:1.0: 1 port detected
- [ 12.947180] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
- [ 12.947916] panfrost ff9a0000.gpu: features: 00000000,00000407, issues: 00000000,24040400
- [ 12.948822] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
- [ 12.949896] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
- [ 12.953606] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 12.961054] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 12.975008] sd 2:0:0:0: Attached scsi generic sg2 type 0
- [ 13.007159] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1
- [ 13.017089] sd 4:0:0:0: Attached scsi generic sg3 type 0
- [ 13.226800] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none.
- [ 13.257486] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
- [ 13.627538] md: resync of RAID array md0
- [ 14.223377] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
- [ 15.392508] md: md0: resync done.
- [ 15.964567] EXT4-fs (md0): mounted filesystem with ordered data mode. Quota mode: journalled.
- [ 16.929859] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
- [ 16.930697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 18.292174] NFSD: Using UMH upcall client tracking operations.
- [ 18.292773] NFSD: starting 90-second grace period (net f0000000)
- [ 18.966888] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 18.970485] Bridge firewalling registered
- [ 19.226130] Initializing XFRM netlink socket
- [ 20.452409] docker0: port 1(veth7e6e332) entered blocking state
- [ 20.453752] docker0: port 1(veth7e6e332) entered disabled state
- [ 20.455066] device veth7e6e332 entered promiscuous mode
- [ 20.470649] docker0: port 1(veth7e6e332) entered blocking state
- [ 20.471253] docker0: port 1(veth7e6e332) entered forwarding state
- [ 20.474515] br-013107cb90ad: port 1(veth559849d) entered blocking state
- [ 20.475155] br-013107cb90ad: port 1(veth559849d) entered disabled state
- [ 20.476158] device veth559849d entered promiscuous mode
- [ 20.478133] docker0: port 1(veth7e6e332) entered disabled state
- [ 20.481655] br-013107cb90ad: port 1(veth559849d) entered blocking state
- [ 20.482315] br-013107cb90ad: port 1(veth559849d) entered forwarding state
- [ 20.485596] br-013107cb90ad: port 1(veth559849d) entered disabled state
- [ 20.554928] br-013107cb90ad: port 2(veth94a2235) entered blocking state
- [ 20.555552] br-013107cb90ad: port 2(veth94a2235) entered disabled state
- [ 20.557292] device veth94a2235 entered promiscuous mode
- [ 20.558857] br-013107cb90ad: port 2(veth94a2235) entered blocking state
- [ 20.559465] br-013107cb90ad: port 2(veth94a2235) entered forwarding state
- [ 20.563976] IPv6: ADDRCONF(NETDEV_CHANGE): br-013107cb90ad: link becomes ready
- [ 20.565287] br-013107cb90ad: port 2(veth94a2235) entered disabled state
- [ 20.671796] br-013107cb90ad: port 3(vethe16eeb7) entered blocking state
- [ 20.673530] br-013107cb90ad: port 3(vethe16eeb7) entered disabled state
- [ 20.682214] device vethe16eeb7 entered promiscuous mode
- [ 20.693732] br-013107cb90ad: port 3(vethe16eeb7) entered blocking state
- [ 20.694362] br-013107cb90ad: port 3(vethe16eeb7) entered forwarding state
- [ 21.316847] br-013107cb90ad: port 3(vethe16eeb7) entered disabled state
- [ 21.589784] eth0: renamed from vethed1f2d9
- [ 21.621457] IPv6: ADDRCONF(NETDEV_CHANGE): veth7e6e332: link becomes ready
- [ 21.622219] docker0: port 1(veth7e6e332) entered blocking state
- [ 21.622755] docker0: port 1(veth7e6e332) entered forwarding state
- [ 21.623520] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
- [ 21.763620] eth0: renamed from vethc550ef3
- [ 21.799318] IPv6: ADDRCONF(NETDEV_CHANGE): vethe16eeb7: link becomes ready
- [ 21.800684] br-013107cb90ad: port 3(vethe16eeb7) entered blocking state
- [ 21.801310] br-013107cb90ad: port 3(vethe16eeb7) entered forwarding state
- [ 21.909835] eth0: renamed from veth7b47714
- [ 21.959209] IPv6: ADDRCONF(NETDEV_CHANGE): veth94a2235: link becomes ready
- [ 21.960161] br-013107cb90ad: port 2(veth94a2235) entered blocking state
- [ 21.960867] br-013107cb90ad: port 2(veth94a2235) entered forwarding state
- [ 21.961860] eth0: renamed from veth283b019
- [ 21.986497] IPv6: ADDRCONF(NETDEV_CHANGE): veth559849d: link becomes ready
- [ 21.987424] br-013107cb90ad: port 1(veth559849d) entered blocking state
- [ 21.988065] br-013107cb90ad: port 1(veth559849d) entered forwarding state
- openmediavault 6.9.1-1 (Shaitan) helios64 ttyS2
- Copyright (C) 2009-2023 by Volker Theile. All rights reserved.
- To manage the system visit the openmediavault workbench:
- br-013107cb90ad: 172.18.0.1
- br-013107cb90ad: fe80::42:8ff:fe03:888d
- docker0: 172.17.0.1
- docker0: fe80::42:27ff:fea1:fdaa
- veth1097107: fe80::a05f:75ff:fe1e:e74a
- veth50dded4: fe80::64bd:8eff:fed0:99b0
- veth590cf0f: fe80::2438:b5ff:fefe:d0e7
- vethc314178: fe80::b8cc:87ff:fe3d:e56b
- By default the workbench administrator account has the
- username 'admin' and password 'openmediavault'.
- It is recommended that you change the password for this account
- within the workbench or using the 'omv-firstaid' CLI command.
- For more information regarding this appliance, please visit the
- web site: https://www.openmediavault.org
- helios64 login: root
- Password:
- _ _ _ _ __ _ _
- | | | | ___| (_) ___ ___ / /_ | || |
- | |_| |/ _ \ | |/ _ \/ __| '_ \| || |_
- | _ | __/ | | (_) \__ \ (_) |__ _|
- |_| |_|\___|_|_|\___/|___/\___/ |_|
- Welcome to Armbian 23.8.1 Bullseye with Linux 6.1.50-current-rockchip64
- No end-user support: community creations
- System load: 34% Up time: 0 min
- Memory usage: 15% of 3.77G IP: 172.18.0.1 172.17.0.1 192.168.180.5
- CPU temp: 48°C Usage of /: 7% of 117G
- [ General system configuration (beta): armbian-config ]
- Last login: Fri Sep 29 01:44:12 CEST 2023 on ttyS2
- root@helios64:~#
Add Comment
Please, Sign In to add comment