SeaBIOS (version rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org)
BUILD: gcc: (GCC) 4.8.5 20150623 (Red Hat 4.8.5-4) binutils: version 2.23.52.0.1-55.el7 20130226
No Xen hypervisor found.
Running on QEMU (i440fx)
Running on KVM
RamSize: 0xc0000000 [cmos]
Relocating init from 0x000dbf60 to 0xbffad650 (size 76064)
Found QEMU fw_cfg
RamBlock: addr 0x0000000000000000 len 0x00000000c0000000 [e820]
RamBlock: addr 0x0000000100000000 len 0x00000000c0000000 [e820]
Moving pm_base to 0x600
boot order:
1: /pci@i0cf8/ide@1,1/drive@1/disk@0
2: /pci@i0cf8/scsi@4/disk@0,0
3: HALT
=== PCI bus & bridge init ===
PCI: pci_bios_init_bus_rec bus = 0x0
=== PCI device probing ===
Found 8 PCI devices (max PCI bus is 00)
=== PCI new allocation pass #1 ===
PCI: check devices
=== PCI new allocation pass #2 ===
PCI: IO: c000 - c0cf
PCI: 32: 00000000c0000000 - 00000000fec00000
PCI: map device bdf=00:02.0  bar 0, addr 0000c000, size 00000040 [io]
PCI: map device bdf=00:04.0  bar 0, addr 0000c040, size 00000040 [io]
PCI: map device bdf=00:01.2  bar 4, addr 0000c080, size 00000020 [io]
PCI: map device bdf=00:03.0  bar 4, addr 0000c0a0, size 00000020 [io]
PCI: map device bdf=00:01.1  bar 4, addr 0000c0c0, size 00000010 [io]
PCI: map device bdf=00:02.0  bar 6, addr feb80000, size 00040000 [mem]
PCI: map device bdf=00:02.0  bar 1, addr febc0000, size 00001000 [mem]
PCI: map device bdf=00:03.0  bar 5, addr febc1000, size 00001000 [mem]
PCI: map device bdf=00:04.0  bar 1, addr febc2000, size 00001000 [mem]
PCI: init bdf=00:00.0 id=8086:1237
PCI: init bdf=00:01.0 id=8086:7000
PIIX3/PIIX4 init: elcr=00 0c
PCI: init bdf=00:01.1 id=8086:7010
PCI: init bdf=00:01.2 id=8086:7020
PCI: init bdf=00:01.3 id=8086:7113
Using pmtimer, ioport 0x608
PCI: init bdf=00:02.0 id=1af4:1000
PCI: init bdf=00:03.0 id=8086:2922
PCI: init bdf=00:04.0 id=1af4:1001
PCI: No VGA devices found
handle_smp: apic_id=1
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0xbffbfcc4 to 0x000f6cc0
Copying MPTABLE from 0x00006dfc/bffa44e0 to 0x000f6bb0
Copying SMBIOS entry point from 0x00006dfc to 0x000f6990
Scan for VGA option rom
UHCI init on dev 00:01.2 (io=c080)
Found 0 lpt ports
Found 1 serial ports
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
ATA controller 2 at 170/374/0 (irq 15 dev 9)
AHCI controller at 03.0, iobase febc1000, irq 11
PS2 keyboard initialized
found virtio-blk at 0:4
pci dev 0:4 using legacy (0.9.5) virtio mode
Searching bootorder for: /pci@i0cf8/*@4
DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /pci@i0cf8/*@2
Searching bootorder for: /rom@genroms/kvmvapic.bin
Searching bootorder for: HALT
drive 0x000f68b0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=41943040
Running option rom at c100:0003
Space available for UMB: c3800-ed000, f6540-f6850
Returned 114688 bytes of ZoneHigh
e820 map has 8 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000bffdc000 = 1 RAM
  4: 00000000bffdc000 - 00000000c0000000 = 2 RESERVED
  5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
  6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
  7: 0000000100000000 - 00000001c0000000 = 1 RAM
enter handle_19:
  NULL
Booting from DVD/CD...
Booting from 0000:7c00