Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.102-1-pve] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Micron 5100 Pro / 52x0 / 5300 SSDs
- Device Model: MTFDDAK480TDC
- Serial Number: 191523050184
- LU WWN Device Id: 5 00a075 123050184
- Add. Product Id: DELL(tm)
- Firmware Version: D1DF005
- User Capacity: 480,103,981,056 bytes [480 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- TRIM Command: Available, deterministic, zeroed
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed May 31 08:25:58 2023 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Status not supported: ATA return descriptor not supported by controller firmware
- SMART overall-health self-assessment test result: PASSED
- Warning: This result is based on an Attribute check.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 1674) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 29) minutes.
- Conveyance self-test routine
- recommended polling time: ( 3) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002e 100 100 050 Old_age Always - 0
- 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 28354
- 12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 31
- 13 Read_Soft_Error_Rate 0x0032 100 100 000 Old_age Always - 0
- 173 Avg_Block-Erase_Count 0x0032 100 100 000 Old_age Always - 4
- 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 21
- 179 Used_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 0
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 000 000 000 Old_age Always - 4118
- 181 Program_Fail_Cnt_Total 0x0032 100 100 001 Old_age Always - 0
- 182 Erase_Fail_Count_Total 0x0032 100 100 001 Old_age Always - 0
- 183 SATA_Int_Downshift_Ct 0x0032 100 100 000 Old_age Always - 0
- 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 70
- 193 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0022 075 063 000 Old_age Always - 25 (Min/Max 17/37)
- 195 Hardware_ECC_Recovered 0x002e 100 100 000 Old_age Always - 0
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 0
- 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
- 201 Unknown_SSD_Attribute 0x0033 100 100 001 Pre-fail Always - 0
- 202 Percent_Lifetime_Remain 0x0033 100 100 005 Pre-fail Always - 3934
- 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
- 210 RAIN_Success_Recovered 0x0032 100 100 000 Old_age Always - 0
- 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 4210345456
- 245 Unknown_Attribute 0x0030 100 100 001 Old_age Offline - 100
- 247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 131601899
- 248 Bckgnd_Program_Page_Cnt 0x0032 100 100 000 Old_age Always - 58397027
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Vendor (0xff) Completed without error 00% 28347 -
- # 2 Vendor (0xff) Completed without error 00% 27902 -
- # 3 Vendor (0xff) Completed without error 00% 27389 -
- # 4 Vendor (0xff) Completed without error 00% 26890 -
- # 5 Vendor (0xff) Completed without error 00% 26399 -
- # 6 Vendor (0xff) Completed without error 00% 25931 -
- # 7 Vendor (0xff) Completed without error 00% 25487 -
- # 8 Vendor (0xff) Completed without error 00% 24988 -
- # 9 Vendor (0xff) Completed without error 00% 24513 -
- #10 Vendor (0xff) Completed without error 00% 24014 -
- #11 Vendor (0xff) Completed without error 00% 23542 -
- #12 Vendor (0xff) Completed without error 00% 23102 -
- #13 Vendor (0xff) Completed without error 00% 22640 -
- #14 Vendor (0xff) Completed without error 00% 22201 -
- #15 Vendor (0xff) Completed without error 00% 21752 -
- #16 Vendor (0xff) Completed without error 00% 21280 -
- #17 Vendor (0xff) Completed without error 00% 20817 -
- #18 Vendor (0xff) Completed without error 00% 20356 -
- #19 Vendor (0xff) Completed without error 00% 19937 -
- #20 Vendor (0xff) Completed without error 00% 19496 -
- #21 Vendor (0xff) Completed without error 00% 19048 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
