Booting Linux on physical CPU 0x0
Linux version 4.9.88-F+S (oe-user@oe-host) (gcc version 7.3.0 (GCC) ) #1 SMP PREEMPT Fri Mar 20 14:25:30 UTC 2020
CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: F&S i.MX6 Solo/DualLite armStoneA9r2
Reserved memory: created CMA memory pool at 0x3c000000, size 320 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat 80d6d200, node_mem_map ab757000
  Normal zone: 2048 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 262144 pages, LIFO batch:31
percpu: Embedded 14 pages/cpu @ab71c000 s26316 r8192 d22836 u57344
pcpu-alloc: s26316 r8192 d22836 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
Kernel command line: console=ttymxc3,115200 login_tty=ttymxc3,115200 mtdparts=gpmi-nand:256k(NBoot)ro,768k(UserDef),256k(Refresh)ro,768k(UBoot)ro,256k(UBootEnv)ro,8m(Kernel)ro,1792k(FDT)ro,-(TargetFS) rootfstype=ubifs ubi.mtd=TargetFS root=ubi0:rootfs rw
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 697720K/1048576K available (8192K kernel code, 440K rwdata, 2816K rodata, 1024K init, 497K bss, 23176K reserved, 327680K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc0800000 - 0xff800000   (1008 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .text : 0x80008000 - 0x80900000   (9184 kB)
      .init : 0x80c00000 - 0x80d00000   (1024 kB)
      .data : 0x80d00000 - 0x80d6e2c0   ( 441 kB)
       .bss : 0x80d70000 - 0x80dec56c   ( 498 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
        Build-time adjustment of leaf fanout to 32.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 16 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 16 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76450001
Switching to timer-based delay loop, resolution 333ns
sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x10100000 - 0x10100058
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (12.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
CPU identified as i.MX6DL, silicon rev 1.4
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
imx-gpc 20dc000.gpc: Registered imx-gpc
i2c-gpio i2c-gpio-lvds: using pins 47 (SDA) and 46 (SCL)
i2c i2c-0: IMX I2C adapter registered
i2c i2c-0: can't use DMA, using PIO instead.
i2c i2c-1: IMX I2C adapter registered
i2c i2c-1: can't use DMA, using PIO instead.
i2c i2c-2: IMX I2C adapter registered
i2c i2c-2: can't use DMA, using PIO instead.
mxs-dma-ext 110000.dma-apbh: initialized
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
MIPI CSI2 driver module loaded
imx rpmsg driver is registered.
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource mxc_timer1
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
imx_busfreq soc:busfreq: Bus frequency scaling disabled
Bus freq driver module loaded
workingset: timestamp_bits=30 max_order=18 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.26)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
imx-weim 21b8000.weim: Driver registered.
i2c /dev entries driver
mxc_sdc_fb fb@0: registered mxc display driver ldb
Console: switching to colour frame buffer device 100x30
imx-sdma 20ec000.sdma: loaded firmware 3.3
2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 28, base_baud = 5000000) is a IMX
21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 78, base_baud = 5000000) is a IMX
21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 79, base_baud = 5000000) is a IMX
21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 80, base_baud = 5000000) is a IMX
console [ttymxc3] enabled
21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 81, base_baud = 5000000) is a IMX
imx sema4 driver is registered.
[drm] Initialized
[drm] Initialized vivante 1.0.0 20120216 on minor 0
brd: module loaded
loop: module loaded
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAH4
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
gpmi-nand-fus 112000.gpmi-nand: enable asynchronous EDO mode 5
Scanning device for bad blocks
random: fast init done
8 cmdlinepart partitions found on MTD device gpmi-nand
Creating 8 MTD partitions on "gpmi-nand":
0x000000000000-0x000000040000 : "NBoot"
0x000000040000-0x000000100000 : "UserDef"
0x000000100000-0x000000140000 : "Refresh"
0x000000140000-0x000000200000 : "UBoot"
0x000000200000-0x000000240000 : "UBootEnv"
0x000000240000-0x000000a40000 : "Kernel"
0x000000a40000-0x000000c00000 : "FDT"
0x000000c00000-0x000010000000 : "TargetFS"
gpmi-nand-fus 112000.gpmi-nand: driver registered.
m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 00, 00
spi_imx 2008000.ecspi: probed
spi_imx 200c000.ecspi: probed
spi_imx 2010000.ecspi: probed
libphy: Fixed MDIO Bus: probed
CAN device driver interface
flexcan 2090000.can: device registered (reg_base=c0a24000, irq=37)
flexcan 2094000.can: device registered (reg_base=c0a2c000, irq=38)
pps pps0: new PPS source ptp0
libphy: fec_enet_mii_bus: probed
fec 2188000.ethernet eth0: registered PHC device 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-mxc: Freescale On-Chip EHCI Host driver
usbcore: registered new interface driver usb-storage
2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
2184000.usb supply vbus not found, using dummy regulator
2184200.usb supply vbus not found, using dummy regulator
ci_hdrc ci_hdrc.1: EHCI Host Controller
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
mousedev: PS/2 mouse device common for all mice
ft5x06_ts_v2 1-0038: Driver version 3.0
usb 1-1: new high-speed USB device number 2 using ci_hdrc
ft5x06_ts_v2 1-0038: write 0x80 to reg 0x19 failed: -6
ft5x06_ts_v2 1-0038: read reg 0xa6 failed: -6
ft5x06_ts_v2 1-0038: read reg 0x88 failed: -6
ft5x06_ts_v2 1-0038: read reg 0x80 failed: -6
ft5x06_ts_v2 1-0038: read reg 0xa3 failed: -6
ft5x06_ts_v2 1-0038: read reg 0xa8 failed: -6
ft5x06_ts_v2 1-0038: Chip ID 0xa3, CTPM ID 0xa8, FW ID 0xa6
ft5x06_ts_v2 1-0038: Report Rate 0x88 (1360Hz), Threshold 0x80 (512)
ft5x06_ts_v2 1-0038: Setting resolution to 799 x 479
input: ft5x06_ts_v2 as /devices/soc0/soc/2100000.aips-bus/21a4000.i2c/i2c-1/1-0038/input/input0
Sitronix touch driver 2.9.15
Release date: 20140916
rtc-pcf8563 0-0051: chip found, driver version 0.4.3
rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
rtc-pcf8563 0-0051: retrieved date/time is not valid.
rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
mxc_v4l2_output v4l2_out: V4L2 device registered as video16
mxc_v4l2_output v4l2_out: V4L2 device registered as video17
imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol ATH3K registered
usbcore: registered new interface driver bcm203x
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
usbcore: registered new interface driver ath3k
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode
sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq
mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
mmc0: new high speed SDIO card at address 0001
mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
mxc_vpu 2040000.vpu_fsl: VPU initialized
mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
galcore: clk_get vg clock failed, disable vg!
Galcore version 6.2.4.150331
mmc2: new DDR MMC card at address 0001
mmcblk2: mmc2:0001 4FTE4R 3.64 GiB
mmcblk2boot0: mmc2:0001 4FTE4R partition 1 4.00 MiB
mmcblk2boot1: mmc2:0001 4FTE4R partition 2 4.00 MiB
mmcblk2rpmb: mmc2:0001 4FTE4R partition 3 512 KiB
caam 2100000.caam: ERA source: CAAMVID.
caam 2100000.caam: AXI pipeline throttling enabled.
caam 2100000.caam: device ID = 0x0a16010000000100 (Era 4)
job rings = 2, qi = 0
caam_jr 2101000.jr0: Entropy delay = 3200
caam_jr 2101000.jr0: Instantiated RNG4 SH0.
caam_jr 2101000.jr0: Instantiated RNG4 SH1.
caam algorithms registered in /proc/crypto
caam_jr 2101000.jr0: registering rng-caam
caam-snvs 20cc000.caam-snvs: can't get snvs clock
caam-snvs 20cc000.caam-snvs: violation handlers armed - non-secure state
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sgtl5000 0-000a: sgtl5000 revision 0x11
fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
NET: Registered protocol family 26
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20161123 t)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
Key type dns_resolver registered
cpu cpu0: Registered imx6q-cpufreq
imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
ubi0: attaching mtd7
random: crng init done
ubi0: scanning is finished
ubi0: attached mtd7 (name "TargetFS", size 244 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 1952, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
ubi0: available PEBs: 0, total reserved PEBs: 1952, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 195
hctosys: unable to open rtc device (rtc1)
rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
rtc-pcf8563 0-0051: retrieved date/time is not valid.
rtc-pcf8563 0-0051: hctosys: unable to read the hardware clock
can: disabling
ALSA device list:
  #0: imx-sgtl5000
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 196
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 240873472 bytes (229 MiB, 1897 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID EA4E01C6-2DF6-4084-AADF-8D97C7150CEB, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 1024K
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 234 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture arm.
systemd[1]: Set hostname to <fsimx6>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Network Service Netlink Socket.
systemd-journald[222]: Received request to flush runtime journal from PID 1
UBIFS error (ubi0:0 pid 234): ubifs_read_node: bad node type (0 but expected 2)
UBIFS error (ubi0:0 pid 234): ubifs_read_node: bad node at LEB 11:160, LEB mapping status 1
Not a node, first 24 bytes:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                          ........................
CPU: 0 PID: 234 Comm: systemd-tmpfile Not tainted 4.9.88-F+S #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<8010e34c>] (unwind_backtrace) from [<8010a5d8>] (show_stack+0x10/0x14)
[<8010a5d8>] (show_stack) from [<803a4288>] (dump_stack+0x70/0x8c)
[<803a4288>] (dump_stack) from [<8031aa3c>] (ubifs_read_node+0x1b8/0x250)
[<8031aa3c>] (ubifs_read_node) from [<80332a70>] (ubifs_tnc_read_node+0xa0/0xa8)
[<80332a70>] (ubifs_tnc_read_node) from [<8031b678>] (tnc_read_node_nm+0x1b8/0x1ec)
[<8031b678>] (tnc_read_node_nm) from [<8031e85c>] (ubifs_tnc_next_ent+0x170/0x1a8)
[<8031e85c>] (ubifs_tnc_next_ent) from [<80313388>] (ubifs_readdir+0x334/0x3e8)
[<80313388>] (ubifs_readdir) from [<801fa330>] (iterate_dir+0x64/0x120)
[<801fa330>] (iterate_dir) from [<801faa30>] (SyS_getdents64+0x7c/0x114)
[<801faa30>] (SyS_getdents64) from [<80106d60>] (ret_fast_syscall+0x0/0x48)
UBIFS error (ubi0:0 pid 234): ubifs_readdir: cannot find next direntry, error -22
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
Bluetooth: FW download over, size 463240 bytes
sdio platform data not available
Bluetooth: vendor=0x2df, device=0x911b, class=255, fn=3
Bluetooth: skip BT-AMP, not supported by firmware
mwifiex: rx work enabled, cpus 2
mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
mwifiex_sdio mmc0:0001:1: WLAN FW is active
mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during      initialization
mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (14.66.35.p52)
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.35.p52)
UBIFS error (ubi0:0 pid 371): ubifs_read_node: bad node type (0 but expected 2)
UBIFS error (ubi0:0 pid 371): ubifs_read_node: bad node at LEB 11:160, LEB mapping status 1
Not a node, first 24 bytes:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00                          ........................
CPU: 0 PID: 371 Comm: ls Not tainted 4.9.88-F+S #1
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<8010e34c>] (unwind_backtrace) from [<8010a5d8>] (show_stack+0x10/0x14)
[<8010a5d8>] (show_stack) from [<803a4288>] (dump_stack+0x70/0x8c)
[<803a4288>] (dump_stack) from [<8031aa3c>] (ubifs_read_node+0x1b8/0x250)
[<8031aa3c>] (ubifs_read_node) from [<80332a70>] (ubifs_tnc_read_node+0xa0/0xa8)
[<80332a70>] (ubifs_tnc_read_node) from [<8031b678>] (tnc_read_node_nm+0x1b8/0x1ec)
[<8031b678>] (tnc_read_node_nm) from [<8031e85c>] (ubifs_tnc_next_ent+0x170/0x1a8)
[<8031e85c>] (ubifs_tnc_next_ent) from [<80313388>] (ubifs_readdir+0x334/0x3e8)
[<80313388>] (ubifs_readdir) from [<801fa330>] (iterate_dir+0x64/0x120)
[<801fa330>] (iterate_dir) from [<801faa30>] (SyS_getdents64+0x7c/0x114)
[<801faa30>] (SyS_getdents64) from [<80106d60>] (ret_fast_syscall+0x0/0x48)
UBIFS error (ubi0:0 pid 371): ubifs_readdir: cannot find next direntry, error -22