# generated by Slic3r 1.2.9 on Tue Aug  8 10:59:03 2017
avoid_crossing_perimeters = 1
bed_shape = 0x0,250x0,250x200,0x200
bed_temperature = 100
before_layer_gcode =
bottom_solid_layers = 3
bridge_acceleration = 400
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 100
brim_width = 0
complete_objects = 0
cooling = 0
default_acceleration = 1500
disable_fan_first_layers = 0
dont_support_bridges = 0
duplicate_distance = 6
end_gcode = \nG0 Z150 ( Send Z axis to bottom of machine )\nG28 X Y F2500 ( Home XY endstops )\nM104 S0 T0 ( Cool down the Right Extruder \nM140 S0 T0 ( Cool down the build platform )\nM18 ( Disable stepper motors )\n\n
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.4
external_perimeter_speed = 90
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.4
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #000000
filament_diameter = 1.8
fill_angle = 45
fill_density = 15%
fill_pattern = line
first_layer_acceleration = 400
first_layer_bed_temperature = 100
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 80
first_layer_temperature = 260
gap_fill_speed = 40
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 1500
infill_every_layers = 3
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 15%
infill_speed = 110
interface_shells = 0
layer_gcode =
layer_height = 0.3
max_fan_speed = 100
max_print_speed = 200
max_volumetric_speed = 0
min_fan_speed = 100
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_speed = 100
perimeters = 2
post_process =
pressure_advance = 0
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 0
retract_length = 0.4
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
seam_position = nearest
skirt_distance = 3
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 5
small_perimeter_speed = 40
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 80
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28\nG1 X210 Y2 Z120 F 2500\n\nM190 S[first_layer_bed_temperature] ;set bed temp\nM109 S[first_layer_temperature] ;set hotend temp\n\n\nG90 ;absolute Positioning\nG21 ;set units to millimeters\nT0 ;select extruder 0\nM82 ; use absolute distances for extrusion\n\nG92 E0 ;reset extruder length\nG1 Z0.15\nG4 S1.5\nG1 E20  ;prime extruder\nG1 X245  E50 F500\nG1 Y40 E50 F500\n\nG92 E0 ;reset extruder length\n
support_material = 1
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 3
support_material_speed = 100
support_material_threshold = 30
temperature = 260
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 80
top_solid_layers = 3
travel_speed = 200
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
xy_size_compensation = 0
z_offset = 0.07