dmesg before second lc

[   70.777750] wlp10s0: deauthenticating from e8:df:70:4b:46:de by local choice (Reason: 3=DEAUTH_LEAVING)
[   71.648293] PM: suspend entry (deep)
[   71.648295] PM: Syncing filesystems ... done.
[   71.669140] Freezing user space processes ... (elapsed 0.029 seconds) done.
[   71.699048] OOM killer disabled.
[   71.699050] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   71.700536] Suspending console(s) (use no_console_suspend to debug)
[   71.711472] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   71.712711] sd 0:0:0:0: [sda] Stopping disk
[   71.824059] parport_pc 00:07: disabled
[   71.824921] serial 00:06: disabled
[   71.825490] e1000e: EEE TX LPI TIMER: 00000011
[   72.374741] ACPI: EC: interrupt blocked
[   72.387908] ACPI: Preparing to enter system sleep state S3
[   73.636764] ACPI: button: The lid device is not compliant to SW_LID.
[   73.636799] ACPI: EC: event blocked
[   73.636800] ACPI: EC: EC stopped
[   73.636802] PM: Saving platform NVS memory
[   73.636825] Disabling non-boot CPUs ...
[   73.648813] smpboot: CPU 1 is now offline
[   73.668037] smpboot: CPU 2 is now offline
[   73.674888] smpboot: CPU 3 is now offline
[   73.676603] ACPI: Low-level resume complete
[   73.676660] ACPI: EC: EC started
[   73.676660] PM: Restoring platform NVS memory
[   73.677889] Enabling non-boot CPUs ...
[   73.677959] x86: Booting SMP configuration:
[   73.677960] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   73.678257] Disabled fast string operations
[   73.680453]  cache: parent cpu1 should not be sleeping
[   73.680937] CPU1 is up
[   73.681032] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   73.681863] Disabled fast string operations
[   73.684045]  cache: parent cpu2 should not be sleeping
[   73.684616] CPU2 is up
[   73.684707] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   73.685427] Disabled fast string operations
[   73.687605]  cache: parent cpu3 should not be sleeping
[   73.688303] CPU3 is up
[   73.691724] ACPI: Waking up from system sleep state S3
[   73.697332] ACPI: EC: interrupt unblocked
[   73.710766] ACPI: EC: event unblocked
[   73.711791] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   73.711806] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   73.715709] serial 00:06: activated
[   73.718331] parport_pc 00:07: activated
[   73.721576] sd 0:0:0:0: [sda] Starting disk
[   73.934223] usb 2-1.4: reset full-speed USB device number 4 using ehci-pci
[   74.076237] usb 2-1.3: reset full-speed USB device number 3 using ehci-pci
[   74.340689] ata5: SATA link down (SStatus 0 SControl 300)
[   74.340742] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   74.340788] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   74.341616] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   74.342948] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   74.343640] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[   74.344018] ata1.00: configured for UDMA/133
[   74.347568] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   74.347582] ata3.00: configured for UDMA/100
[   74.348786] ata6: SATA link down (SStatus 0 SControl 300)
[   74.430225] usb 2-1.3.2: reset full-speed USB device number 5 using ehci-pci
[   74.639165] psmouse serio4: synaptics: queried max coordinates: x [..5498], y [..4560]
[   78.397185] OOM killer enabled.
[   78.397187] Restarting tasks ... done.
[   78.399856] video LNXVIDEO:00: Restoring backlight state
[   78.421231] IPv6: ADDRCONF(NETDEV_UP): wlp10s0: link is not ready
[   78.573785] pci_bus 0000:01: Allocating resources
[   78.573820] pci_bus 0000:0a: Allocating resources
[   78.573852] pcieport 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 0a] add_size 1000
[   78.573860] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000 add_align 100000
[   78.573875] pci_bus 0000:0b: Allocating resources
[   78.573907] pcieport 0000:00:1c.7: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[   78.573912] pcieport 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[   78.573944] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
[   78.573954] pcieport 0000:00:1c.7: BAR 15: assigned [mem 0xcfe00000-0xcfffffff 64bit pref]
[   78.573963] pcieport 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
[   78.573968] pcieport 0000:00:1c.7: BAR 13: assigned [io  0x5000-0x5fff]
[   78.732469] PM: suspend exit
[   79.200968] Bluetooth: hci0: BCM: chip id 20
[   79.201954] Bluetooth: hci0: BCM: features 0x07
[   79.219036] Bluetooth: hci0: BCM20702A
[   79.219954] Bluetooth: hci0: BCM20702A0 (001.001.024) build 0000
[   79.220183] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e031.hcd failed with error -2
[   79.220193] Bluetooth: hci0: BCM: Patch brcm/BCM20702A0-0489-e031.hcd not found
[   79.325426] wlp10s0: authenticate with e8:df:70:4b:46:de
[   79.342500] wlp10s0: send auth to e8:df:70:4b:46:de (try 1/3)
[   79.347611] wlp10s0: authenticated
[   79.348057] wlp10s0: associate with e8:df:70:4b:46:de (try 1/3)
[   79.355245] wlp10s0: RX AssocResp from e8:df:70:4b:46:de (capab=0x1431 status=0 aid=3)
[   79.355629] wlp10s0: associated
[   79.375129] wlp10s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:4b:46:de
[   79.383067] IPv6: ADDRCONF(NETDEV_CHANGE): wlp10s0: link becomes ready