Debug Console Out

Reading symbols from C:\Users\VryCool\Downloads\pio-stm32f4-usbtest-main\.pio\build\genericSTM32F411CE\firmware.elf...
Warning: 'set target-async', an alias for the command 'set mi-async', is deprecated.
Use 'set mi-async'.

PlatformIO Unified Debugger -> https://bit.ly/pio-debug
PlatformIO: debug_tool = stlink
PlatformIO: Initializing remote target...
xPack Open On-Chip Debugger 0.12.0-01004-g9ea7f3d64-dirty (2023-01-30-15:04)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
hla_swd
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : tcl server disabled
Info : telnet server disabled
Info : clock speed 2000 kHz
Info : STLINK V2J47S7 (API v2) VID:PID 0483:3748
Info : Target voltage: 3.305660
Info : [stm32f4x.cpu] Cortex-M4 r0p1 processor detected
Info : [stm32f4x.cpu] target has 6 breakpoints, 4 watchpoints
Info : starting gdb server for stm32f4x.cpu on pipe
Info : accepting 'gdb' connection from pipe
[stm32f4x.cpu] halted due to debug-request, current mode: Handler HardFault
xPSR: 0x41000003 pc: 0x08001a6c msp: 0x2001ff38
Info : device id = 0x10006431
Info : flash size = 512 KiB
Info : flash size = 512 bytes
0x08001a6c in disableTimerClock ()
2
Info : Unable to match requested speed 2000 kHz, using 1800 kHz
2
Unable to match requested speed 2000 kHz, using 1800 kHz
[stm32f4x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08001e98 msp: 0x20020000
[stm32f4x.cpu] halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08001e98 msp: 0x20020000
Temporary breakpoint 1 at 0x8001e84
Note: automatically using hardware breakpoints for read-only addresses.
PlatformIO: Initialization completed
warning: Invalid state, unable to determine sp alias, assuming msp.
PlatformIO: Resume the execution to `debug_init_break = tbreak main`
PlatformIO: More configuration options -> https://bit.ly/pio-debug

Program
 received signal SIGINT, Interrupt.
0x08001eee in pinMode ()