jzef

no part

Sep 22nd, 2026
61
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.03 KB | None | 0 0
  1. ============================================================
  2. XPCSM64 KD 1.33 -- full BIOS bridge
  3. ============================================================
  4. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  5. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  6.  
  7. [1/6] Firmware and CPU
  8.  
  9. Firmware vendor : VMware, Inc.
  10. Firmware rev : 0x00010000
  11. UEFI revision : 2.31 (raw 0x0002001F)
  12. Secure Boot : unknown status=0x800000000000000E
  13. Setup Mode : unknown status=0x800000000000000E
  14. CPU vendor : GenuineIntel
  15. Family/Model/Step: 6/42/7
  16. APIC : YES x2APIC: NO VMX: NO
  17. Long Mode : YES NX: YES
  18. Address bits : physical 40, virtual 48
  19.  
  20. Current CPU state:
  21. CR0 = 0x0000000080010033
  22. CR3 = 0x000000003FF9A000
  23. CR4 = 0x0000000000000668
  24. EFER = 0x0000000000000500
  25. RSP = 0x000000003FFBF3D8 RFLAGS=0x0000000000000206
  26. CS/DS/SS = 0x0018 / 0x0008 / 0x0008
  27. GDTR base/limit = 0x00000000FFFFFF20 / 0x002F
  28. IDTR base/limit = 0x000000003FEE63C0 / 0x0FFF
  29.  
  30. Press any key for CSM/legacy tests...
  31. ============================================================
  32. XPCSM64 KD 1.33 -- full BIOS bridge
  33. ============================================================
  34. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  35. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  36.  
  37. [2/6] Firmware CSM / legacy interfaces
  38.  
  39. EFI_LEGACY_BIOS_PROTOCOL : NOT FOUND status=0x800000000000000E
  40. EFI_LEGACY_REGION2_PROTOCOL : NOT FOUND status=0x800000000000000E
  41.  
  42. Interpretation: no standard firmware CSM interface detected.
  43. Vendor-specific legacy code can exist without these protocols.
  44.  
  45. Press any key for the low-memory map...
  46. ============================================================
  47. XPCSM64 KD 1.33 -- full BIOS bridge
  48. ============================================================
  49. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  50. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  51.  
  52. [3/6] UEFI memory map -- important low memory
  53.  
  54. Type Start End Pages
  55. ACPINVS 0x0000000000000000 0x0000000000000FFF 1
  56. Conventional 0x0000000000001000 0x000000000009DFFF 157
  57. LoaderData 0x000000000009E000 0x000000000009FFFF 2
  58. Reserved 0x00000000000C0000 0x00000000000FFFFF 64
  59.  
  60. Legacy address windows:
  61. 00000-004FF IVT/BDA 07C00 boot sector
  62. A0000-BFFFF VGA C0000-EFFFF Option ROM
  63. F0000-FFFFF BIOS
  64.  
  65. Largest conventional block below 640K: 0x0000000000001000-0x000000000009DFFF bytes=643072
  66. Total conventional RAM reported: 998 MiB
  67. Highest described address: 0x00000000FFC29FFF
  68. DescriptorSize=48 MapKey=0x0000000000002BBF
  69.  
  70. Press any key for GOP / ACPI / boot-device data...
  71. ============================================================
  72. XPCSM64 KD 1.33 -- full BIOS bridge
  73. ============================================================
  74. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  75. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  76.  
  77. [4/6] GOP, ACPI/SMBIOS and boot device
  78.  
  79. GOP graphics : FOUND
  80. mode 2/9 800x600 BGRR 8:8:8:8
  81. pixels/scanline=800 framebuffer=0x00000000F0000000 size=0x00000000001D4C00
  82. ACPI 2.0 RSDP : 0x000000003FF85000
  83. ACPI 1.0 RSDP : not found
  84. SMBIOS 3 entry : not found
  85. SMBIOS 2 entry : 0x000000003FF96000
  86.  
  87. Loaded image : base=0x000000003E4FA000 size=0x0000000000012000
  88. Boot BlockIO : FOUND
  89. MediaId=1 block=512 bytes LastLBA=0x0000000000031FFF
  90. removable=NO logical-partition=YES readonly=NO
  91. Boot DevicePath : FOUND
  92. node type=2 subtype=1 len=12
  93. node type=1 subtype=1 len=6
  94. node type=3 subtype=1 len=8
  95. node type=4 subtype=1 len=42 HARD DRIVE partition=1 startLBA=0x0000000000000800 sizeLBA=0x0000000000032000 MBRType=1 SigType=1
  96. node type=127 subtype=255 len=4
  97.  
  98. Press any key for PCI/PCIe inventory...
  99. ============================================================
  100. XPCSM64 KD 1.33 -- full BIOS bridge
  101. ============================================================
  102. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  103. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  104.  
  105. [5/6] PCI/PCIe inventory
  106.  
  107. Relevant devices on screen; ALL devices are also sent to COM1.
  108. Format: segment:bus:device.function vendor:device class/subclass/progif
  109.  
  110. PCI devices found: 13
  111.  
  112. 0:00:00.0 8086:7190 class 06/00/00 Bridge
  113. 0:00:01.0 8086:7191 class 06/04/00 Bridge
  114. 0:00:07.0 8086:7110 class 06/01/00 Bridge
  115. 0:00:07.1 8086:7111 class 01/01/8A Mass storage
  116. 0:00:07.3 8086:7113 class 06/80/00 Bridge
  117. 0:00:0F.0 15AD:0405 class 03/00/00 Display ROM=0x000000003FD79018/0x0000000000008000
  118. 0:00:10.0 1000:0030 class 01/00/00 Mass storage ROM=0x000000003FD75018/0x0000000000002000
  119. 0:00:11.0 15AD:0790 class 06/04/01 Bridge
  120. 0:00:15.0 15AD:07A0 class 06/04/00 Bridge
  121. 0:03:00.0 15AD:0778 class 0C/03/30 Serial/USB
  122. 0:00:16.0 15AD:07A0 class 06/04/00 Bridge
  123. 0:00:17.0 15AD:07A0 class 06/04/00 Bridge
  124. 0:00:18.0 15AD:07A0 class 06/04/00 Bridge
  125.  
  126. PCI root bridges: 1 segments: 0
  127.  
  128. END. This program changed no low-memory data and did not call ExitBootServices.
  129.  
  130. Press any key to build the XPCSM handoff prototype...
  131. ============================================================
  132. XPCSM64 KD 1.33 -- full BIOS bridge
  133. ============================================================
  134. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  135. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  136.  
  137. [6/6] XPCSM handoff prototype
  138.  
  139. Handoff physical address : 0x000000000009D000
  140. Handoff size : 2928 bytes in 1 page(s)
  141. Below 1 MiB : YES
  142. Flags : 0x000000F9
  143. E820 preview entries : 20
  144. PCI entries saved : 13
  145. Memory MapKey snapshot : 0x0000000000002BC2
  146. Handoff checksum : 0x7EB5555306561AC5 verify=OK
  147.  
  148. First conservative E820 preview entries:
  149. 0x0000000000000000 + 0x0000000000001000 type=4
  150. 0x0000000000001000 + 0x000000000009C000 type=1
  151. 0x000000000009D000 + 0x0000000000003000 type=2
  152. 0x0000000000100000 + 0x000000003E3FA000 type=1
  153. 0x000000003E4FA000 + 0x0000000000040000 type=2
  154. 0x000000003E53A000 + 0x0000000000009000 type=1
  155. 0x000000003E543000 + 0x0000000000ED6000 type=2
  156. 0x000000003F419000 + 0x00000000001B7000 type=1
  157. 0x000000003F5D0000 + 0x0000000000631000 type=2
  158. 0x000000003FC01000 + 0x0000000000014000 type=1
  159.  
  160. This is already the kind of block our future 16-bit BIOS core can consume.
  161. IMPORTANT: this Memory MapKey/E820 table is only a snapshot. The final CSM
  162. must call GetMemoryMap again immediately before ExitBootServices.
  163.  
  164. Press any key to return to UEFI...
  165. ============================================================
  166. XPCSM64 KD 1.33 -- full BIOS bridge
  167. ============================================================
  168. WARNING: native AHCI disk writes are ENABLED for INT 13h AH=03/43.
  169. COM1: SILENT -- reserved for NTLDR/WinDbg at 115200 8N1
  170.  
  171. [7/7] Full XP boot preflight
  172.  
  173. Physical boot disk: 512-byte BlockIO, LastLBA=0x0000000004FFFFFF
  174. No NTFS partition with XP/NTLDR boot code found.
  175. Press any key...
Advertisement
Add Comment
Please, Sign In to add comment