SHARE
TWEET

OPi PC 2 booting 'Debian server'

a guest Nov 14th, 2016 321 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. HELLO! BOOT0 is starting!
  2. boot0 commit : 8
  3. boot0 version : 4.0
  4. set pll start
  5. set pll end
  6. rtc[0] value = 0x00000000
  7. rtc[1] value = 0x00000000
  8. rtc[2] value = 0x0000000f
  9. rtc[3] value = 0x0000a102
  10. rtc[4] value = 0x00000000
  11. rtc[5] value = 0x00000000
  12. DRAM BOOT DRIVE INFO: V0.6
  13. the chip id is 0x00000001
  14. the chip id is 0x00000001
  15. the chip id is 0x00000001
  16. the chip id is 0x00000001
  17. the chip id is 0x00000001
  18. axp not exist
  19. DRAM CLK =672 MHZ
  20. DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  21. DRAM zq value: 0x003b3bf9
  22. DRAM SIZE =1024 M
  23. DRAM simple test OK.
  24. dram size =1024
  25. card no is 0
  26. sdcard 0 line count 4
  27. [mmc]: mmc driver ver 2016-03-15 20:40
  28. [mmc]: sdc0 spd mode error, 2
  29. [mmc]: Wrong media type 0x00000000
  30. [mmc]: ***Try SD card 0***
  31. [mmc]: HSSDR52/SDR25 4 bit
  32. [mmc]: 50000000 Hz
  33. [mmc]: 7580 MB
  34. [mmc]: ***SD/MMC 0 init OK!!!***
  35. sum=710a857c
  36. src_sum=710a857c
  37. read boot-pkg from emmc 32800 sector
  38. Succeed in loading uboot from sdmmc flash.
  39. Entry_name        = u-boot
  40. Entry_name        = monitor
  41. Entry_name        = scp
  42. set arisc reset to de-assert state
  43. Ready to disable icache.
  44. ?R?=?    Configuring SPC Controller
  45. NOTICE:  BL3-1: v1.0(debug):3ffd944
  46. NOTICE:  BL3-1: Built : 11:09:10, Aug 30 2016
  47. NOTICE:  BL3-1 commit: 3ffd9442d4769d7fc0002770e3b69b55150a288e
  48.  
  49. INFO:    BL3-1: Initializing runtime services
  50. ERROR:   Error initializing runtime service tspd_fast
  51. INFO:    BL3-1: Preparing for EL3 exit to normal world
  52. INFO:    BL3-1: Next image address = 0x4a000000
  53. INFO:    BL3-1: Next image spsr = 0x1d3
  54.  
  55.  
  56. U-Boot 2014.07 (Nov 09 2016 - 15:49:10) Allwinner Technology
  57.  
  58. uboot commit : 8
  59. secure enable bit: 0
  60. i2c: secure monitor exist
  61. [      0.745]pmbus:   ready
  62. u0:48105000
  63. [      0.749][ARISC] :arisc initialize
  64. [      0.779][ARISC] :arisc para ok
  65. [SCP] :sunxi-arisc driver begin startup 2
  66. [SCP] :arisc version: [sun8iw5_v0.03.00-244-gb750b8e]
  67. [SCP] :sunxi-arisc driver v1.20 is starting
  68. [      0.795][ARISC] :sunxi-arisc driver startup succeeded
  69. axp: get node[charger0] error
  70. [SCP ERROR] :message process error
  71. [SCP ERROR] :message addr   : 48105080
  72. [SCP ERROR] :message state  : 5
  73. [SCP ERROR] :message attr   : 2
  74. [SCP ERROR] :message type   : 80
  75. [SCP ERROR] :message result : f3
  76. [SCP WARING] :callback not install
  77. [SCP ERROR] :arisc twi read pmu reg 0x3 err
  78. probe axp806 failed
  79. axp_probe error
  80. [      0.976]PMU: cpux 1008 Mhz,AXI=336 Mhz
  81. PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz
  82. run key detect
  83. no key found
  84. no uart input
  85. DRAM:  1 GiB
  86. fdt addr: 0x76e9f0e0
  87. Relocation Offset is: 35ef2000
  88. axp: get node[charger0] error
  89. In:    serial
  90. Out:   serial
  91. Err:   serial
  92. gic: sec monitor mode
  93. [box standby] read rtc = 0xf
  94. [box standby] start_type = 0x1
  95. [box standby] to kernel
  96. boot_init_gpio used
  97. ir boot recovery not used
  98. workmode = 0,storage type = 1
  99. [      1.180]MMC:        0
  100. [mmc]: mmc driver ver 2016-05-20 17:18:00-test0
  101. [mmc]: get card2_boot_para:sdc_ex_dly_used 0
  102. [mmc]: no mmc-hs400-1_8v!
  103. [mmc]: no mmc-hs200-1_8v!
  104. [mmc]: no mmc-ddr-1_8v!
  105. [mmc]: delete max-frequency from dtb
  106. SUNXI SD/MMC: 0
  107. [mmc]: 50 MHz...
  108. [mmc]: sample: 62 - 161(ps)
  109. [mmc]: 100 MHz...
  110. [mmc]: sample: 31 - 161(ps)
  111. [mmc]: 200 MHz...
  112. [mmc]: sample: 16 - 156(ps)
  113. [mmc]: media type 0x0
  114. [mmc]: Wrong media type 0x0
  115. [mmc]: ************Try SD card 0************
  116. [mmc]: host caps: 0x27
  117. [mmc]: MID 03 PSN 49e841e3
  118. [mmc]: PNM SL08G -- 0x53-4c-30-38-47
  119. [mmc]: PRV 8.0
  120. [mmc]: MDT m-6 y-2016
  121. [mmc]: speed mode     : HSSDR52/SDR25
  122. [mmc]: clock          : 50000000 Hz
  123. [mmc]: bus_width      : 4 bit
  124. [mmc]: user capacity  : 7580 MB
  125. [mmc]: ************SD/MMC 0 init OK!!!************
  126. [mmc]: erase_grp_size      : 0x1WrBlk*0x200=0x200 Byte
  127. [mmc]: secure_feature      : 0x0
  128. [mmc]: secure_removal_type : 0x0
  129. [      1.397]sunxi flash init ok
  130. [      1.412]start
  131. drv_disp_init
  132. tv_init:
  133. tv_probe:000
  134. no report hpd work,you need support the switch class!
  135. screen 0 don't support TV!
  136. tv_init:
  137. fetch tv1 err.
  138. drv_disp_init finish
  139. hdcp is closed by sys config.
  140. no the part:Reserve0
  141. hpd_dev_num=2, id of def_output_dev is 0
  142. hdmi hpd out, force open?
  143. fdt_setprop_u32 disp.init_disp(0x20b0404) code:<no error>
  144. fb_id=0, size=3686400, gd->ram_size=1073741824, SUNXI_DISPLAY_FRAME_BUFFER_SIZE=16777216
  145. [      1.984]end
  146. PowerBus = 0( 2:vBus 3:acBus other: not exist)
  147. no battery, limit to dc
  148. no battery exist
  149. sunxi_bmp_logo_display
  150. [boot disp] can not find the partition Reserve0
  151. bmp_name=bootlogo.bmp
  152. ** Bad device size - sunxi_flash 0 **
  153. sunxi bmp info error : unable to open logo file bootlogo.bmp
  154. fail to find part named env
  155. Using default environment
  156.  
  157. --------fastboot partitions--------
  158. mbr not exist
  159. base bootcmd=run mmcbootcmd
  160. bootcmd set setargs_mmc
  161. no misc partition is found
  162. to be run cmd=run mmcbootcmd
  163. cann't get the boot_base from the env
  164. read item0 copy0
  165. Item0 (Map) magic is bad
  166. the secure storage item0 copy0 is bad
  167. read item0 copy1
  168. Item0 (Map) magic is bad
  169. the secure storage item0 copy0 == copy1, the data is good
  170. the secure storage map is empty
  171. check user data form private
  172. the private part isn't exist
  173. update dtb dram start
  174. update dtb dram  end
  175. serial is: 24005035c120303403cc
  176. [      2.152]inter uboot shell
  177. Hit any key to stop autoboot:  0
  178. Loading orangepi uEnv.txt from 40000000 ...
  179. reading uEnv.txt
  180. [mmc]: blkcnt should not be 0
  181. 140 bytes read in 5 ms (27.3 KiB/s)
  182. Loading boot environment ...
  183. Loading orangepi bootscript ...
  184. reading boot.scr
  185. ** Unable to read file boot.scr **
  186. Booting with defaults ...
  187. Loading orangepi orangepi/OrangePiH5orangepi.dtb from 44000000 ...
  188. reading orangepi/OrangePiH5orangepi.dtb
  189. 56524 bytes read in 8 ms (6.7 MiB/s)
  190. Loading orangepi orangepi/uImage from 4007ffc0 ...
  191. reading orangepi/uImage
  192. 12200584 bytes read in 522 ms (22.3 MiB/s)
  193. reading initrd.img
  194. 1090786 bytes read in 49 ms (21.2 MiB/s)
  195. Loading orangepi initrd.img from 44300000 ...
  196. bootm kernel:4007ffc0 initrd:44300000 ...
  197. bootm initd_size:10a4e2 fdt_addr:44000000 ...
  198. ## Booting kernel from Legacy Image at 4007ffc0 ...
  199.    Image Name:   OrangePiH5
  200.    Image Type:   ARM Linux Kernel Image (uncompressed)
  201.    Data Size:    12200520 Bytes = 11.6 MiB
  202.    Load Address: 40080000
  203.    Entry Point:  40080000
  204.    Verifying Checksum ... OK
  205.    XIP Kernel Image ... OK
  206.    reserving fdt memory region: addr=40020000 size=800
  207.    reserving fdt memory region: addr=48000000 size=1000000
  208.    reserving fdt memory region: addr=48100000 size=4000
  209.    reserving fdt memory region: addr=48104000 size=1000
  210.    reserving fdt memory region: addr=48105000 size=1000
  211.    Loading Ramdisk to 76d85000, end 76e8f4e2 ... OK
  212.    Using Device Tree in place at 44000000, end 44015dbf
  213.  
  214. Starting kernel ...
  215.  
  216. INFO:    BL3-1: Next image address = 0x40080000
  217. INFO:    BL3-1: Next image spsr = 0x3c5
  218. [    0.000000] Initializing cgroup subsys cpuset
  219. [    0.000000] Initializing cgroup subsys cpu
  220. [    0.000000] Initializing cgroup subsys cpuacct
  221. [    0.000000] Linux version 3.10.65 (orange@orange-All-Series) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #31 SMP PREEMPT Mon Nov 14 09:31:54 CST 2016
  222. [    0.000000] CPU: AArch64 Processor [410fd034] revision 4
  223. [    0.000000] Machine: sun50iw2
  224. [    0.000000] cma: CMA: reserved 16 MiB at 7f000000
  225. [    0.000000] psci: probing for conduit method from DT.
  226. [    0.000000] psci: PSCIv0.2 detected in firmware.
  227. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  228. [    0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc03ef95000 s20224 r8192 d20736 u49152
  229. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258560
  230. [    0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=36:c9:e3:f1:b8:05 root=/dev/mmcblk0p2 ro rootwait
  231. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  232. [    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  233. [    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  234. [    0.000000] Memory: 1024MB = 1024MB total
  235. [    0.000000] Memory: 985196k/985196k available, 63380k reserved
  236. [    0.000000] Virtual kernel memory layout:
  237. [    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000   (245759 MB)
  238. [    0.000000]     vmemmap : 0xffffffbc00e00000 - 0xffffffbc01c00000   (    14 MB)
  239. [    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
  240. [    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc040000000   (  1024 MB)
  241. [    0.000000]       .init : 0xffffffc000acf000 - 0xffffffc000b58f00   (   552 kB)
  242. [    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000ace6f4   ( 10554 kB)
  243. [    0.000000]       .data : 0xffffffc000b59000 - 0xffffffc000c22a48   (   807 kB)
  244. [    0.000000] Preemptible hierarchical RCU implementation.
  245. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  246. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
  247. [    0.000000] Console: colour dummy device 80x25
  248. [    0.000000] console [tty0] enabled
  249. [    4.250527] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  250. [    4.250564] pid_max: default: 32768 minimum: 301
  251. [    4.251044] Security Framework initialized
  252. [    4.251069] SELinux:  Initializing.
  253. [    4.251442] Mount-cache hash table entries: 256
  254. [    4.253448] Initializing cgroup subsys debug
  255. [    4.253470] Initializing cgroup subsys freezer
  256. [    4.253683] ftrace: allocating 28415 entries in 111 pages
  257. [    4.289004] CPU0: update cpu_power 1024
  258. [    4.289039] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  259. [    4.290782] virtual base = 0xffffff800000a000.
  260. [    4.290809] gicd_base = 0xffffff800000c000.
  261. [    4.290823] gicc_base = 0xffffff800000e000.
  262. [    4.292755] CPU1: Booted secondary processor
  263. [    4.292779] CPU1: update cpu_power 1024
  264. [    4.294546] CPU2: Booted secondary processor
  265. [    4.294559] CPU2: update cpu_power 1024
  266. [    4.296309] CPU3: Booted secondary processor
  267. [    4.296321] CPU3: update cpu_power 1024
  268. [    4.296404] Brought up 4 CPUs
  269. [    4.296487] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  270. [    4.297785] devtmpfs: initialized
  271. [    4.328252] atomic64 test passed
  272. [    4.328279] pinctrl core: initialized pinctrl subsystem
  273. [    4.331084] NET: Registered protocol family 16
  274. [    4.333636] dump_class_init,839, success
  275. [    4.334871] vdso: 2 pages (1 code, 1 data) at base ffffffc000b69000
  276. [    4.334910] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  277. [    4.336167] software IO TLB [mem 0x7d000000-0x7d400000] (4MB) mapped at [ffffffc03d000000-ffffffc03d3fffff]
  278. [    4.337382] DMA: preallocated 256 KiB pool for atomic allocations
  279. [    4.338073] pll_audio-set_default_rate=24576000 success!
  280. [    4.338113] pll_video-set_default_rate=297000000 success!
  281. [    4.338167] pll_ve-set_default_rate=420000000 success!
  282. [    4.338291] pll_de-set_default_rate=864000000 success!
  283. [    4.338594] ahb1-set_default_rate=200000000 success!
  284. [    4.339462] de-set_default_source=pll_de success!
  285. [    4.339479] de-set_default_rate=432000000 success!
  286. [    4.339547] tcon0-set_default_source=pll_video success!
  287. [    4.339635] tve-set_default_source=pll_de success!
  288. [    4.339935] hdmi-set_default_source=pll_video success!
  289. [    4.343542] sun50iw2p1-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  290. [    4.346445] sun50iw2p1-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  291. [    4.348527] sunxi hwspinlock vbase:0xffffff800005c000
  292. [    4.431956] bio: create slab <bio-0> at 0
  293. [    4.433018] pwm module init!
  294. [    4.439228] SCSI subsystem initialized
  295. [    4.440293] usbcore: registered new interface driver usbfs
  296. [    4.440520] usbcore: registered new interface driver hub
  297. [    4.440852] usbcore: registered new device driver usb
  298. [    4.443281] Linux video capture interface: v2.00
  299. [    4.450054] [ARISC] :sunxi-arisc driver v1.20
  300. [    4.450976] [ARISC] :sunxi-arisc driver v1.20 startup succeeded
  301. [    4.451670] Advanced Linux Sound Architecture Driver Initialized.
  302. [    4.453134] Bluetooth: Core ver 2.16
  303. [    4.453352] NET: Registered protocol family 31
  304. [    4.453368] Bluetooth: HCI device and connection manager initialized
  305. [    4.453411] Bluetooth: HCI socket layer initialized
  306. [    4.453449] Bluetooth: L2CAP socket layer initialized
  307. [    4.453520] Bluetooth: SCO socket layer initialized
  308. [    4.454412] cfg80211: Calling CRDA to update world regulatory domain
  309. [    4.455179] [pm]aw_pm_init!
  310. [    4.455282] np name = /soc@01c00000/rtc@01f00000.
  311. [    4.455299] base = ffffff800006c100, len = 4.
  312. [    4.455314] pmu name: pmic0 .
  313. [    4.455390] Warning: can not find np for pmic0.
  314. [    4.455405] pmu name: pmic1 .
  315. [    4.455434] Warning: can not find np for pmic1.
  316. [    4.455521] add_sys_pwr_dm: get ldo name  for id: vcc-lpddr failed
  317. [    4.455540] add_sys_pwr_dm: get ldo name  for id: vcc-pl failed
  318. [    4.455558] add_sys_pwr_dm: axpdummy_ldo6 ldo already alwayson.
  319. [    4.455590] add_sys_pwr_dm: vcc-pc not sys id.
  320. [    4.455605] after inited: sys_mask config = 0x4855.
  321. [    4.455638] Warning: can not find np for dynamic_standby_para.
  322. [    4.455772] [pm]valid
  323. [    4.455782] [pm]valid
  324. [    4.455792] Notice: sun9i & sun8iw5 & sun50i not need support normal standby,                                change to super standby.
  325. [    4.455843] [DISP]disp_module_init
  326. [    4.456762] [DISP] init_disp:0x20b0404
  327. [    4.456781] [DISP] boot_disp:0x0
  328. [    4.457292] [DISP] fb_base:0x0
  329. [    4.461261] [DISP] Fb_copy_boot_fb,line:959:no boot_fb0
  330. [    4.466289] [DISP]disp_module_init finish
  331. [    4.467412] sunxi budget cooling probe start !
  332. [    4.467449] CPU freq cooling register Success
  333. [    4.467477] CPU hotplug cooling register Success
  334. [    4.467812] CPU budget cooling register Success
  335. [    4.469520] input: sunxi-ths as /devices/virtual/input/input0
  336. [    4.469570] thermal thermal_zone0: failed to read out thermal zone 0
  337. [    4.470073] Switching to clocksource arch_sys_counter
  338. [    4.514592] FS-Cache: Loaded
  339. [    4.515159] CacheFiles: Loaded
  340. [    4.542221] NET: Registered protocol family 2
  341. [    4.543737] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
  342. [    4.543918] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  343. [    4.544080] TCP: Hash tables configured (established 8192 bind 8192)
  344. [    4.545268] TCP: reno registered
  345. [    4.545287] UDP hash table entries: 512 (order: 2, 16384 bytes)
  346. [    4.545331] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  347. [    4.546097] NET: Registered protocol family 1
  348. [    4.547169] RPC: Registered named UNIX socket transport module.
  349. [    4.547189] RPC: Registered udp transport module.
  350. [    4.547203] RPC: Registered tcp transport module.
  351. [    4.547217] RPC: Registered tcp NFSv4.1 backchannel transport module.
  352. [    4.548179] Unpacking initramfs...
  353. [    4.595945] Freeing initrd memory: 1064K (ffffffc036d85000 - ffffffc036e8f000)
  354. [    4.597060] lock super standby defaultly!
  355. [    4.597088] lookup_scene_lock_name: new scene lock super_standby
  356. [    4.597105] scene_lock_init name=super_standby
  357. [    4.597121] scene_lock: super_standby, type 5, count 1
  358. [    4.598719] audit: initializing netlink socket (disabled)
  359. [    4.598818] type=2000 audit(0.340:1): initialized
  360. [    4.603801] FS-Cache: Netfs 'nfs' registered for caching
  361. [    4.605059] FS-Cache: Netfs 'cifs' registered for caching
  362. [    4.605966] NTFS driver 2.1.30 [Flags: R/W].
  363. [    4.606252] fuse init (API version 7.22)
  364. [    4.607442] msgmni has been set to 1958
  365. [    4.610060] io scheduler noop registered
  366. [    4.610082] io scheduler deadline registered
  367. [    4.610205] io scheduler cfq registered (default)
  368. [    4.611660] sunxi_bootup_extend_probe: bootup extend state 1
  369. [    4.611680] bootup extend probe ok
  370. [    4.612252] failed to get easy_light_used assign
  371. [    4.612271] failed to get standby led pin assign
  372. [    4.612325] gpio_pin_1(362) gpio_is_valid
  373. [    4.612637] gpio_pin_2(20) gpio_is_valid
  374. [    4.612985] gpio name is PL10, ret = 0
  375. [    4.613308] gpio name is PA20, ret = 0
  376. [    4.613762] gpio_init finish with uesd
  377. [    4.614937] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  378. [    4.614970] sw_console_setup()1268 - console setup baud 115200 parity n bits 8, flow n
  379. [    5.520823] console [ttyS0] enabled
  380. [    5.525582] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  381. [    5.532771] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  382. [    5.541356] misc dump reg init
  383. [    5.553035] loop: module loaded
  384. [    5.556529] Get boot type cmd line fail
  385. [    5.563536] spi spi0: master is unqueued, this is deprecated
  386. [    5.570455] spi spi1: master is unqueued, this is deprecated
  387. [    5.579036] tun: Universal TUN/TAP device driver, 1.6
  388. [    5.584588] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  389. [    5.593771] PPP generic driver version 2.4.2
  390. [    5.598986] PPP BSD Compression module registered
  391. [    5.604150] PPP Deflate Compression module registered
  392. [    5.609690] PPP MPPE Compression module registered
  393. [    5.614944] NET: Registered protocol family 24
  394. [    5.619864] PPTP driver version 0.8.5
  395. [    5.624141] hso: drivers/net/usb/hso.c: Option Wireless
  396. [    5.630474] usbcore: registered new interface driver hso
  397. [    5.636523] usbcore: registered new interface driver asix
  398. [    5.642656] usbcore: registered new interface driver ax88179_178a
  399. [    5.649524] usbcore: registered new interface driver cdc_ether
  400. [    5.656113] usbcore: registered new interface driver net1080
  401. [    5.662524] usbcore: registered new interface driver cdc_subset
  402. [    5.669196] usbcore: registered new interface driver zaurus
  403. [    5.675542] usbcore: registered new interface driver cdc_ncm
  404. [    5.681745] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  405. [    5.689155] get ehci0-controller, regulator_io is no nocare
  406. [    5.695344] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000d183e0, 0x:ffffff8000b36000, irq_no:68
  407. [    5.708655] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  408. [    5.718589] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
  409. [    5.728568] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc00047a464
  410. [    5.749343] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
  411. [    5.757102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  412. [    5.764545] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  413. [    5.772461] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  414. [    5.780662] usb usb1: Manufacturer: Linux 3.10.65 ehci_hcd
  415. [    5.786665] usb usb1: SerialNumber: sunxi-ehci
  416. [    5.792564] hub 1-0:1.0: USB hub found
  417. [    5.796691] hub 1-0:1.0: 1 port detected
  418. [    5.801420] get drv_vbus is fail, 84
  419. [    5.805331] get ehci1-controller, regulator_io is no nocare
  420. [    5.811497] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000d18660, 0x:ffffff8000b3c000, irq_no:6a
  421. [    5.824806] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  422. [    5.834747] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 2
  423. [    5.844635] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc00047a464
  424. [    5.867423] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
  425. [    5.875156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  426. [    5.882599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  427. [    5.890515] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  428. [    5.898747] usb usb2: Manufacturer: Linux 3.10.65 ehci_hcd
  429. [    5.904751] usb usb2: SerialNumber: sunxi-ehci
  430. [    5.910562] hub 2-0:1.0: USB hub found
  431. [    5.914696] hub 2-0:1.0: 1 port detected
  432. [    5.919417] get drv_vbus is fail, 84
  433. [    5.923328] get ehci2-controller, regulator_io is no nocare
  434. [    5.929493] [sunxi-ehci2]: probe, pdev->name: 1c1c000.ehci2-controller, sunxi_ehci: 0xffffffc000d188e0, 0x:ffffff8000b44000, irq_no:6c
  435. [    5.942797] sunxi-ehci 1c1c000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  436. [    5.952880] sunxi-ehci 1c1c000.ehci2-controller: new USB bus registered, assigned bus number 3
  437. [    5.962745] sunxi-ehci 1c1c000.ehci2-controller: irq 108, io mem 0xffffffc00047a464
  438. [    5.985501] sunxi-ehci 1c1c000.ehci2-controller: USB 0.0 started, EHCI 1.00
  439. [    5.993233] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  440. [    6.000676] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  441. [    6.008592] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  442. [    6.016824] usb usb3: Manufacturer: Linux 3.10.65 ehci_hcd
  443. [    6.022828] usb usb3: SerialNumber: sunxi-ehci
  444. [    6.028664] hub 3-0:1.0: USB hub found
  445. [    6.032791] hub 3-0:1.0: 1 port detected
  446. [    6.037517] get drv_vbus is fail, 84
  447. [    6.041428] get ehci3-controller, regulator_io is no nocare
  448. [    6.047597] [sunxi-ehci3]: probe, pdev->name: 1c1d000.ehci3-controller, sunxi_ehci: 0xffffffc000d18b60, 0x:ffffff8000b4c000, irq_no:6e
  449. [    6.060900] sunxi-ehci 1c1d000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  450. [    6.070832] sunxi-ehci 1c1d000.ehci3-controller: new USB bus registered, assigned bus number 4
  451. [    6.080729] sunxi-ehci 1c1d000.ehci3-controller: irq 110, io mem 0xffffffc00047a464
  452. [    6.103582] sunxi-ehci 1c1d000.ehci3-controller: USB 0.0 started, EHCI 1.00
  453. [    6.111316] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
  454. [    6.118759] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  455. [    6.126675] usb usb4: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  456. [    6.134907] usb usb4: Manufacturer: Linux 3.10.65 ehci_hcd
  457. [    6.140910] usb usb4: SerialNumber: sunxi-ehci
  458. [    6.146711] hub 4-0:1.0: USB hub found
  459. [    6.150837] hub 4-0:1.0: 1 port detected
  460. [    6.155856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  461. [    6.162864] get ohci0-controller, regulator_io is no nocare
  462. [    6.169017] hci: request ohci0-controller gpio:354
  463. [    6.174271] ohci0-controller get usb clk_usbohci12m clk failed.
  464. [    6.180749] ohci0-controller get usb clk_hoscx2 clk failed.
  465. [    6.186854] ohci0-controller get usb clk_hosc failed.
  466. [    6.192390] ohci0-controller get usb clk_losc clk failed.
  467. [    6.198299] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000d179e0
  468. [    6.208555] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  469. [    6.218107] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 5
  470. [    6.227612] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x76b076c07630720
  471. [    6.294732] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  472. [    6.302176] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  473. [    6.310083] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  474. [    6.317902] usb usb5: Manufacturer: Linux 3.10.65 ohci_hcd
  475. [    6.323914] usb usb5: SerialNumber: sunxi-ohci
  476. [    6.329679] hub 5-0:1.0: USB hub found
  477. [    6.333820] hub 5-0:1.0: 1 port detected
  478. [    6.338500] get drv_vbus is fail, 84
  479. [    6.342422] get ohci1-controller, regulator_io is no nocare
  480. [    6.348573] ohci1-controller get usb clk_usbohci12m clk failed.
  481. [    6.355062] ohci1-controller get usb clk_hoscx2 clk failed.
  482. [    6.361168] ohci1-controller get usb clk_hosc failed.
  483. [    6.366695] ohci1-controller get usb clk_losc clk failed.
  484. [    6.372611] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000d17c60
  485. [    6.382864] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  486. [    6.392418] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 6
  487. [    6.401918] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x76b076c07630720
  488. [    6.471706] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  489. [    6.479149] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  490. [    6.487056] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  491. [    6.494875] usb usb6: Manufacturer: Linux 3.10.65 ohci_hcd
  492. [    6.500887] usb usb6: SerialNumber: sunxi-ohci
  493. [    6.506631] hub 6-0:1.0: USB hub found
  494. [    6.510767] hub 6-0:1.0: 1 port detected
  495. [    6.515444] get drv_vbus is fail, 84
  496. [    6.519366] get ohci2-controller, regulator_io is no nocare
  497. [    6.525516] ohci2-controller get usb clk_usbohci12m clk failed.
  498. [    6.532005] ohci2-controller get usb clk_hoscx2 clk failed.
  499. [    6.538111] ohci2-controller get usb clk_hosc failed.
  500. [    6.543638] ohci2-controller get usb clk_losc clk failed.
  501. [    6.549554] [sunxi-ohci2]: probe, pdev->name: 1c1c000.ohci2-controller, sunxi_ohci: 0xffffffc000d17ee0
  502. [    6.559806] sunxi-ohci 1c1c000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  503. [    6.569356] sunxi-ohci 1c1c000.ohci2-controller: new USB bus registered, assigned bus number 7
  504. [    6.578863] sunxi-ohci 1c1c000.ohci2-controller: irq 109, io mem 0x76b076c07630720
  505. [    6.648817] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
  506. [    6.656263] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  507. [    6.664170] usb usb7: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  508. [    6.671989] usb usb7: Manufacturer: Linux 3.10.65 ohci_hcd
  509. [    6.678001] usb usb7: SerialNumber: sunxi-ohci
  510. [    6.683741] hub 7-0:1.0: USB hub found
  511. [    6.687877] hub 7-0:1.0: 1 port detected
  512. [    6.692560] get drv_vbus is fail, 84
  513. [    6.696483] get ohci3-controller, regulator_io is no nocare
  514. [    6.702628] ohci3-controller get usb clk_usbohci12m clk failed.
  515. [    6.709117] ohci3-controller get usb clk_hoscx2 clk failed.
  516. [    6.715223] ohci3-controller get usb clk_hosc failed.
  517. [    6.720750] ohci3-controller get usb clk_losc clk failed.
  518. [    6.726665] [sunxi-ohci3]: probe, pdev->name: 1c1d000.ohci3-controller, sunxi_ohci: 0xffffffc000d18160
  519. [    6.736917] sunxi-ohci 1c1d000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  520. [    6.746467] sunxi-ohci 1c1d000.ohci3-controller: new USB bus registered, assigned bus number 8
  521. [    6.755966] sunxi-ohci 1c1d000.ohci3-controller: irq 111, io mem 0x76b076c07630720
  522. [    6.825940] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
  523. [    6.833383] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  524. [    6.841290] usb usb8: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  525. [    6.849114] usb usb8: Manufacturer: Linux 3.10.65 ohci_hcd
  526. [    6.855126] usb usb8: SerialNumber: sunxi-ohci
  527. [    6.860858] hub 8-0:1.0: USB hub found
  528. [    6.864994] hub 8-0:1.0: 1 port detected
  529. [    6.870347] usbcore: registered new interface driver usb-storage
  530. [    6.877154] usbcore: registered new interface driver ums-alauda
  531. [    6.883844] usbcore: registered new interface driver ums-cypress
  532. [    6.890618] usbcore: registered new interface driver ums-datafab
  533. [    6.897412] usbcore: registered new interface driver ums_eneub6250
  534. [    6.904388] usbcore: registered new interface driver ums-freecom
  535. [    6.911175] usbcore: registered new interface driver ums-isd200
  536. [    6.917849] usbcore: registered new interface driver ums-jumpshot
  537. [    6.924725] usbcore: registered new interface driver ums-karma
  538. [    6.931318] usbcore: registered new interface driver ums-onetouch
  539. [    6.938210] usbcore: registered new interface driver ums-realtek
  540. [    6.944995] usbcore: registered new interface driver ums-sddr09
  541. [    6.951687] usbcore: registered new interface driver ums-sddr55
  542. [    6.958359] usbcore: registered new interface driver ums-usbat
  543. [    6.965587] usbcore: registered new interface driver usbserial
  544. [    6.972187] usbcore: registered new interface driver option
  545. [    6.978485] usbserial: USB Serial support registered for GSM modem (1-port)
  546. [    6.987849] mousedev: PS/2 mouse device common for all mice
  547. [    6.994803] usbcore: registered new interface driver xpad
  548. [    7.000939] usbcore: registered new interface driver usb_acecad
  549. [    7.007622] usbcore: registered new interface driver aiptek
  550. [    7.013944] usbcore: registered new interface driver gtco
  551. [    7.020066] usbcore: registered new interface driver hanwang
  552. [    7.026459] usbcore: registered new interface driver kbtab
  553. [    7.032712] usbcore: registered new interface driver wacom
  554. [    7.040876] sunxi-rtc 1f00000.rtc: rtc core: registered sunxi-rtc as rtc0
  555. [    7.048366] sunxi-rtc 1f00000.rtc: RTC enabled
  556. [    7.053909] IR NEC protocol handler initialized
  557. [    7.058878] IR RC5(x) protocol handler initialized
  558. [    7.064119] IR RC6 protocol handler initialized
  559. [    7.069081] IR JVC protocol handler initialized
  560. [    7.074035] IR Sony protocol handler initialized
  561. [    7.079093] IR RC5 (streamzap) protocol handler initialized
  562. [    7.085189] IR SANYO protocol handler initialized
  563. [    7.090342] IR MCE Keyboard/mouse protocol handler initialized
  564. [    7.096722] sunxi cedar version 0.1
  565. [    7.100756] [cedar]: install start!!!
  566. [    7.104850] cedar_ve: cedar-ve the get irq is 90
  567. [    7.110598] [cedar]: install end!!!
  568. [    7.126882] sunxi gpu cooling probe start !
  569. [    7.131504] CPU gpu cooling register Success
  570. [    7.136595] device-mapper: uevent: version 1.0.3
  571. [    7.142146] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  572. [    7.151589] Bluetooth: HCI UART driver ver 2.2
  573. [    7.156464] Bluetooth: HCI H4 protocol initialized
  574. [    7.161704] Bluetooth: HCI Realtek H5 protocol initialized
  575. [    7.167714] rtk_btcoex: rtk_uart_coex_init, version: 1.1
  576. [    7.173523] rtk_btcoex: create workqueue
  577. [    7.178805] cpuidle: using governor ladder
  578. [    7.183298] cpuidle: using governor menu
  579. [    7.189515] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.54 2016-05-11 21:04) Compiled in Nov 10 2016 at 11:04:17
  580. [    7.202549] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str vcc-sdcv
  581. [    7.209612] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str vcc-sdcvq33
  582. [    7.217058] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdcvd
  583. [    7.224312] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
  584. [    7.230514] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
  585. [    7.236811] sunxi-mmc 1c0f000.sdmmc: No vdmmc regulator found
  586. [    7.243612] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
  587. [    7.249646] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  588. [    7.274544] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  589. [    7.304415] sunxi-mmc 1c0f000.sdmmc: base:0xffffff8000b6c000 irq:92
  590. [    7.311283] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
  591. [    7.318781] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
  592. [    7.325476] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  593. [    7.338267] hidraw: raw HID events driver (C) Jiri Kosina
  594. [    7.345266] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  595. [    7.358858] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  596. [    7.366270] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  597. [    7.370586] usbcore: registered new interface driver usbhid
  598. [    7.370588] usbhid: USB HID core driver
  599. [    7.371558] zram: Created 1 device(s) ...
  600. [    7.388432] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  601. [    7.388493] ashmem: initialized
  602. [    7.388859] logger: created 256K log 'log_main'
  603. [    7.389199] logger: created 256K log 'log_events'
  604. [    7.389553] logger: created 256K log 'log_radio'
  605. [    7.389888] logger: created 256K log 'log_system'
  606. [    7.393153] AUDIO :get regulator name failed .
  607. [    7.424446] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  608. [    7.431346] sunxi-codec-machine sound.6:  sun50iw2codec <-> 1c22c00.cpudai0-controller mapping ok
  609. [    7.431680] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  610. [    7.431754] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  611. [    7.434133] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  612. [    7.478968] sndhdmi sound.7:  sndhdmi <-> 1c22800.daudio mapping ok
  613. [    7.488505] u32 classifier
  614. [    7.491494]     Actions configured
  615. [    7.495216] Netfilter messages via NETLINK v0.30.
  616. [    7.500359] mmc0: host does not support reading read-only switch. assuming write-enable.
  617. [    7.503665] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
  618. [    7.503737] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
  619. [    7.504369] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
  620. [    7.504669] mmc0: new high speed SDHC card at address aaaa
  621. [    7.549820] nf_conntrack version 0.5.0 (7833 buckets, 31332 max)
  622. [    7.556460] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
  623. [    7.561998] ctnetlink v0.93: registering with nfnetlink.
  624. [    7.568669]  mmcblk0: p1 p2
  625. [    7.570146] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  626. [    7.570148] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  627. [    7.586887] xt_time: kernel timezone is -0000
  628. [    7.591816] ipip: IPv4 over IPv4 tunneling driver
  629. [    7.598124] gre: GRE over IPv4 demultiplexor driver
  630. [    7.603481] ip_gre: GRE over IPv4 tunneling driver
  631. [    7.611370] ip_tables: (C) 2000-2006 Netfilter Core Team
  632. [    7.617673] arp_tables: (C) 2002 David S. Miller
  633. [    7.622888] TCP: bic registered
  634. [    7.626322] TCP: cubic registered
  635. [    7.629959] TCP: westwood registered
  636. [    7.633868] TCP: htcp registered
  637. [    7.637396] Initializing XFRM netlink socket
  638. [    7.642473] NET: Registered protocol family 10
  639. [    7.650188] mip6: Mobile IPv6
  640. [    7.653520] ip6_tables: (C) 2000-2006 Netfilter Core Team
  641. [    7.659946] sit: IPv6 over IPv4 tunneling driver
  642. [    7.666471] NET: Registered protocol family 17
  643. [    7.671425] NET: Registered protocol family 15
  644. [    7.676813] Bluetooth: RFCOMM TTY layer initialized
  645. [    7.682295] Bluetooth: RFCOMM socket layer initialized
  646. [    7.687929] Bluetooth: RFCOMM ver 1.11
  647. [    7.692029] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  648. [    7.697849] Bluetooth: BNEP filters: protocol multicast
  649. [    7.703591] Bluetooth: BNEP socket layer initialized
  650. [    7.709068] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  651. [    7.715571] Bluetooth: HIDP socket layer initialized
  652. [    7.721649] Registering SWP/SWPB emulation handler
  653. [    7.728748] [DISP] boot_disp:0x0
  654. [    7.733685] [HDMI] cec support = 1
  655. [    7.846824] there is no tve dac(0) offset value.
  656. [    7.851888] [DISP] boot_disp:0x0
  657. [    7.855573] [DISP] disp_init_tv,line:641:screen 0 don't support TV!
  658. [    8.445503] [DISP] disp_device_attached_and_enable,line:165:attched ok, mgr0<-->device0, type=4, mode=4
  659. [    8.456637] usb_serial_number:20080411
  660. [    8.461545] file system registered
  661. [    8.469599] android_usb gadget: Mass Storage Function, version: 2009/09/11
  662. [    8.477202] android_usb gadget: Number of LUNs=3
  663. [    8.482293]  lun0: LUN: removable file: (no medium)
  664. [    8.487645]  lun1: LUN: removable file: (no medium)
  665. [    8.492983]  lun2: LUN: removable file: (no medium)
  666. [    8.499227] android_usb gadget: android_usb ready
  667. [    8.504616] sunxi-rtc 1f00000.rtc: setting system clock to 2016-01-01 00:02:55 UTC (1451606575)
  668. [    8.523230] ALSA device list:
  669. [    8.526551]   #0: audiocodec
  670. [    8.529699]   #1: sndhdmi
  671. [    8.533188] Freeing unused kernel memory: 548K (ffffffc000acf000 - ffffffc000b58000)
  672. Kernel params: console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=36:c9:e3:f1:b8:05 root=/dev/mmcblk0p2 ro rootwait
  673. Waiting for root system /dev/mmcblk0p2, countdown : 5
  674. Rootfs: /dev/mmcblk0p2
  675. [    8.635051] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  676. [    8.645941] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  677. [    8.668991] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  678. [    8.948862] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
  679. [    8.964199] systemd[1]: Detected architecture 'arm64'.
  680.  
  681. Welcome to Debian GNU/Linux 8 (jessie)!
  682.  
  683. [    9.017353] systemd[1]: Failed to insert module 'autofs4'
  684. [    9.024796] systemd[1]: Set hostname to <Orangepi>.
  685. [    9.262431] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  686. [    9.280152] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  687. [    9.289282] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  688. [    9.297625] systemd[1]: Expecting device dev-ttyS0.device...
  689.          Expecting device dev-ttyS0.device...
  690. [    9.321355] systemd[1]: Starting Remote File Systems (Pre).
  691. [  OK  ] Reached target Remote File Systems (Pre).
  692. [    9.350837] systemd[1]: Reached target Remote File Systems (Pre).
  693. [    9.357742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  694. [    9.368075] systemd[1]: Starting Encrypted Volumes.
  695. [  OK  ] Reached target Encrypted Volumes.
  696. [    9.390189] systemd[1]: Reached target Encrypted Volumes.
  697. [    9.396189] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
  698. [    9.405576] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  699. [    9.414292] systemd[1]: Starting Paths.
  700. [  OK  ] Reached target Paths.
  701. [    9.439397] systemd[1]: Reached target Paths.
  702. [    9.444215] systemd[1]: Starting Swap.
  703. [  OK  ] Reached target Swap.
  704. [    9.468912] systemd[1]: Reached target Swap.
  705. [    9.473622] systemd[1]: Expecting device dev-mmcblk0p1.device...
  706.          Expecting device dev-mmcblk0p1.device...
  707. [    9.498436] systemd[1]: Starting Root Slice.
  708. [  OK  ] Created slice Root Slice.
  709. [    9.518116] systemd[1]: Created slice Root Slice.
  710. [    9.523305] systemd[1]: Starting User and Session Slice.
  711. [  OK  ] Created slice User and Session Slice.
  712. [    9.547643] systemd[1]: Created slice User and Session Slice.
  713. [    9.553969] systemd[1]: Starting Delayed Shutdown Socket.
  714. [  OK  ] Listening on Delayed Shutdown Socket.
  715. [    9.577163] systemd[1]: Listening on Delayed Shutdown Socket.
  716. [    9.583499] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  717. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  718. [    9.606714] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  719. [    9.614374] systemd[1]: Starting Journal Socket (/dev/log).
  720. [  OK  ] Listening on Journal Socket (/dev/log).
  721. [    9.636206] systemd[1]: Listening on Journal Socket (/dev/log).
  722. [    9.642821] systemd[1]: Starting udev Control Socket.
  723. [  OK  ] Listening on udev Control Socket.
  724. [    9.665723] systemd[1]: Listening on udev Control Socket.
  725. [    9.671753] systemd[1]: Starting udev Kernel Socket.
  726. [  OK  ] Listening on udev Kernel Socket.
  727. [    9.695235] systemd[1]: Listening on udev Kernel Socket.
  728. [    9.701118] systemd[1]: Starting Journal Socket.
  729. [  OK  ] Listening on Journal Socket.
  730. [    9.724760] systemd[1]: Listening on Journal Socket.
  731. [    9.730300] systemd[1]: Starting System Slice.
  732. [  OK  ] Created slice System Slice.
  733. [    9.754274] systemd[1]: Created slice System Slice.
  734. [    9.759808] systemd[1]: Started File System Check on Root Device.
  735. [    9.766519] systemd[1]: Starting system-systemd\x2dfsck.slice.
  736. [  OK  ] Created slice system-systemd\x2dfsck.slice.
  737. [    9.793633] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  738. [    9.800541] systemd[1]: Starting system-getty.slice.
  739. [  OK  ] Created slice system-getty.slice.
  740. [    9.823154] systemd[1]: Created slice system-getty.slice.
  741. [    9.829099] systemd[1]: Starting system-serial\x2dgetty.slice.
  742. [  OK  ] Created slice system-serial\x2dgetty.slice.
  743. [    9.852672] systemd[1]: Created slice system-serial\x2dgetty.slice.
  744. [    9.859753] systemd[1]: Starting Increase datagram queue length...
  745.          Starting Increase datagram queue length...
  746. [    9.884982] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  747.          Starting Create list of required static device nodes...rrent kernel...
  748. [    9.914594] systemd[1]: Mounting Debug File System...
  749.          Mounting Debug File System...
  750. [    9.933984] systemd[1]: Mounted POSIX Message Queue File System.
  751. [    9.940813] systemd[1]: Starting udev Coldplug all Devices...
  752.          Starting udev Coldplug all Devices...
  753. [    9.980743] systemd[1]: Starting Load Kernel Modules...
  754.          Starting Load Kernel Modules...
  755. [   10.002821] systemd[1]: Mounted Huge Pages File System.
  756. [   10.012591] systemd[1]: Started Set Up Additional Binary Formats.
  757. [   10.019459] systemd[1]: Starting Slices.
  758. [  OK  ] Reached target Slices.
  759. [   10.039721] systemd[1]: Reached target Slices.
  760. [   10.044762] systemd[1]: Starting Remount Root and Kernel File Systems...
  761.          Starting Remount Root and Kernel File Systems...
  762. [  OK  ] Mounted Debug File System.
  763. [   10.089005] systemd[1]: Mounted Debug File System.
  764. [  OK  ] Started Increase datagram queue length.
  765. [   10.118563] systemd[1]: Started Increase datagram queue length.
  766. [  OK  ] Started Create list of required static device nodes ...current kernel.
  767. [   10.148019] systemd[1]: Started Create list of required static device nodes for the current kernel.
  768. [  OK  ] Started Load Kernel Modules.
  769. [   10.177576] systemd[1]: Started Load Kernel Modules.
  770. [   10.194696] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  771. [  OK  ] Started Remount Root and Kernel File Systems.
  772. [   10.226717] systemd[1]: Started Remount Root and Kernel File Systems.
  773. [   10.260156] systemd[1]: Started Various fixups to make systemd work better on Debian.
  774. [   10.268888] systemd[1]: Starting Load/Save Random Seed...
  775.          Starting Load/Save Random Seed...
  776. [   10.298846] systemd[1]: Mounting Configuration File System...
  777.          Mounting Configuration File System...
  778. [   10.327940] systemd[1]: Mounting FUSE Control File System...
  779.          Mounting FUSE Control File System...
  780. [   10.357301] systemd[1]: Starting Apply Kernel Variables...
  781.          Starting Apply Kernel Variables...
  782. [   10.387058] systemd[1]: Starting Create Static Device Nodes in /dev...
  783.          Starting Create Static Device Nodes in /dev...
  784. [   10.416076] systemd[1]: Starting Syslog Socket.
  785. [  OK  ] Listening on Syslog Socket.
  786. [   10.433336] systemd[1]: Listening on Syslog Socket.
  787. [   10.438830] systemd[1]: Starting Journal Service...
  788.          Starting Journal Service...
  789. [  OK  ] Started Journal Service.
  790. [   10.482534] systemd[1]: Started Journal Service.
  791. [  OK  ] Mounted FUSE Control File System.
  792. [  OK  ] Mounted Configuration File System.
  793. [  OK  ] Started udev Coldplug all Devices.
  794. [  OK  ] Started Load/Save Random Seed.
  795. [  OK  ] Started Apply Kernel Variables.
  796. [  OK  ] Started Create Static Device Nodes in /dev.
  797.          Starting udev Kernel Device Manager...
  798. [  OK  ] Reached target Local File Systems (Pre).
  799. [   10.681266] systemd-udevd[1769]: starting version 215
  800. [  OK  ] Started udev Kernel Device Manager.
  801.          Starting Copy rules generated while the root was ro...
  802. [  OK  ] Started Copy rules generated while the root was ro.
  803. [  OK  ] Found device /dev/ttyS0.
  804. [   10.983759] sunxi_keyboard_startup: keyboard has no clk.
  805. [   10.990540] input: sunxi-keyboard as /devices/virtual/input/input1
  806. [   11.036269] node ir_addr_code16 get failed!
  807. [   11.040918] sunxi_ir_startup: cir get supply err
  808. [   11.046671] Registered IR keymap rc_map_sunxi
  809. [   11.052321] input: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0/input2
  810. [   11.060696] rc0: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0
  811. [   11.068283] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input3
  812. [   11.086455] [VFE]cci probe end cci_sel = 0!
  813. [   11.093414] [VFE]cci_init end
  814. [  OK  ] Reached target Sound Card.
  815. [  OK  ] Found device /dev/mmcblk0p1.
  816.          Starting File System Ch[   11.352635] [VFE]Welcome to Video Front End driver
  817. eck on /dev/mmcblk0p1...
  818. [   11.359759] [VFE]csi0 probe end!
  819. [   11.365541] [VFE]csi_init end
  820. [   11.369882] [ISP] isp platform_id = 3!
  821. [   11.374000] [VFE]isp0 probe end!
  822. [   11.378093] [VFE]sunxi_isp_platform_register end
  823. [   11.384068] [VFE]mipi_init end
  824. [   11.388481] [VFE]flash_init end
  825. [   11.395511] [VFE]pdev->id = 0
  826. [   11.398845] [VFE]dev->cci_sel = 0
  827. [   11.402497] [VFE]dev->csi_sel = 0
  828. [   11.402500] [VFE]dev->mipi_sel = 0
  829. [   11.402507] [VFE]dev->isp_sel = 0
  830. [   11.402528] [VFE_WARN]fetch csi0_dev0_twi_id from device_tree failed
  831. [   11.402546] [VFE_WARN]fetch csi0_dev0_iovdd from device_tree failed
  832. [   11.402553] [VFE_WARN]fetch csi0_dev0_avdd from device_tree failed
  833. [   11.402560] [VFE_WARN]fetch csi0_dev0_dvdd from device_tree failed
  834. [   11.402568] [VFE_WARN]fetch csi0_dev0_afvdd from device_tree failed
  835. [   11.402625] [VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed
  836. [   11.402630] [VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed
  837. [   11.402635] [VFE_WARN]fetch csi0_dev0_flvdd from device_tree failed
  838. [   11.402641] [VFE_WARN]fetch csi0_dev0_flvdd_vol from device_tree failed
  839. [   11.402646] [VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed
  840. [   11.403258] [VFE]vfe_init end
  841. [   11.407371] [VFE]probe_work_handle start!
  842. [   11.407649] [VFE]vfe_runtime_resume
  843. [   11.419627] [VFE]..........................vfe clk open!.......................
  844. [   11.419651] [VFE]v4l2 subdev register input_num = 0
  845. [   11.419654] [VFE]vfe sensor detect start! input_num = 0
  846. [   11.419661] [VFE]Find sensor name is "gc2035", i2c address is 78, type is "YUV" !
  847. [   11.419664] [VFE]Sub device register "gc2035" i2c_addr = 0x78 start!
  848. [   11.419667] [VFE_ERR]Error registering v4l2 subdevice No such device!
  849. [   11.419670] [VFE_ERR]vfe sensor register check error at input_num = 0
  850. [   11.419689] [VFE]V4L2 device registered as (null)
  851. [   11.419734] [VFE]vfe_runtime_suspend
  852. [   11.419736] [VFE]..........................vfe clk close!.......................
  853. [   11.425857] [VFE]probe_work_handle end!
  854. [    7.402204] systemd-fsck[1875]: fsck.fat 3.0.27 (2014-11-12)
  855. [    7.424070] systemd-fsck[1875]: /dev/mmcblk0p1: 12 files, 6528/25541 clusters
  856. [  OK  ] Started File System Check on /dev/mmcblk0p1.
  857.          Mounting /boot...
  858. [  OK  ] Mounted /boot.
  859. [  OK  ] Reached target Local File Systems.
  860. [  OK  ] Reached target Remote File Systems.
  861.          Starting Trigger Flushing of Journal to Persistent Storage...
  862.          Starting Create Volatile Files and Directories...
  863.          Starting LSB: Raise network interfaces....
  864. [   11.787549] systemd-journald[1767]: Received request to flush runtime journal from PID 1
  865. [  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
  866. [  OK  ] Started Create Volatile Files and Directories.
  867.          Starting Update UTMP about System Boot/Shutdown...
  868. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  869. [   12.526402] GPIO 102 valid
  870. [   12.726310] Current_V is : 1
  871. [   13.030983] MDIO bus name is 1c30000.eth
  872. [   13.046207] libphy: 1c30000.eth: probed
  873. [   13.080387] sunxi-gmac 1c30000.eth eth0: eth0: Type(6) PHY ID 001cc915 at 1 IRQ poll (1c30000.eth-0:01)
  874. [   13.102979] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  875. [ ***  ] A start job is running for LSB: Raise network interf...(9s / no limit)[   18.984401] libphy: 1c30000.eth-0:01 - Link is Up - 1000/Full
  876. [   18.990733] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  877. [  OK  ] Started LSB: Raise network interfaces..
  878. [  OK  ] Reached target Network.
  879. [  OK  ] Reached target System Initialization.
  880. [  OK  ] Listening on D-Bus System Message Bus Socket.
  881. [  OK  ] Reached target Sockets.
  882. [  OK  ] Reached target Timers.
  883.          Starting Restore Sound Card State...
  884. [  OK  ] Reached target Basic System.
  885. [  OK  ] Started Fix eth0 mac address to uEnv.txt.
  886. [  OK  ] Started /etc/rc.local Compatibility.
  887. [  OK  ] Started Permit User Sessions.
  888. [  OK  ] Started System Logging Service.
  889. [  OK  ] Started Login Service.
  890.          Starting Serial Getty on ttyS0...
  891. [  OK  ] Started Serial Getty on ttyS0.
  892.          Starting Getty on tty1...
  893. [  OK  ] Started Getty on tty1.
  894. [  OK  ] Reached target Login Prompts.
  895. [  OK  ] Reached target Multi-User System.
  896. [  OK  ] Reached target Graphical Interface.
  897.          Starting Update UTMP about System Runlevel Changes...
  898. [  OK  ] Started Update UTMP about System Runlevel Changes.
  899.  
  900. Debian GNU/Linux 8 Orangepi ttyS0
  901.  
  902. Orangepi login: debian
  903. Password: debian
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top