CGarces

dmesg openwrt

May 27th, 2019
199
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Linux version 4.9.152 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d) ) #0 Mon Jan 28 08:54:32 2019
  2. [ 0.000000] SoC: Danube rev 1.5
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU0 revision is: 00019641 (MIPS 24KEc)
  5. [ 0.000000] MIPS: machine is SMC7908A-ISP, Airties WAV-221
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  17. [ 0.000000] On node 0 totalpages: 16384
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804556e4, node_mem_map 81006d20
  19. [ 0.000000] Normal zone: 128 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  22. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  25. [ 0.000000] Kernel command line: console=ttyLTQ0,115200
  26. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [ 0.000000] Writing ErrCtl register=00046af8
  30. [ 0.000000] Readback ErrCtl register=00046af8
  31. [ 0.000000] Memory: 54308K/65536K available (3697K kernel code, 162K rwdata, 572K rodata, 5920K init, 210K bss, 11228K reserved, 0K cma-reserved)
  32. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:256
  34. [ 0.000000] CPU Clock: 333MHz
  35. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
  36. [ 0.000020] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
  37. [ 0.007962] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
  38. [ 0.050610] pid_max: default: 32768 minimum: 301
  39. [ 0.055589] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [ 0.062130] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.078901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  42. [ 0.088591] futex hash table entries: 256 (order: -1, 3072 bytes)
  43. [ 0.094860] pinctrl core: initialized pinctrl subsystem
  44. [ 0.102536] NET: Registered protocol family 16
  45. [ 0.114782] pinctrl-xway 1e100b10.pinmux: Init done
  46. [ 0.121312] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
  47. [ 0.182078] Can't analyze schedule() prologue at 80399f80
  48. [ 0.188815] PCI host bridge /fpi@10000000/pci@E105400 ranges:
  49. [ 0.194520] MEM 0x0000000018000000..0x0000000019ffffff
  50. [ 0.199794] IO 0x000000001ae00000..0x000000001affffff
  51. [ 0.254319] usbcore: registered new interface driver usbfs
  52. [ 0.259952] usbcore: registered new interface driver hub
  53. [ 0.265371] usbcore: registered new device driver usb
  54. [ 0.270987] PCI host bridge to bus 0000:00
  55. [ 0.275037] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
  56. [ 0.281960] pci_bus 0000:00: root bus resource [io 0x1ae00000-0x1affffff]
  57. [ 0.288902] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  58. [ 0.295757] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  59. [ 0.303835] pci 0000:00:0e.0: [168c:ff1a] type 00 class 0x020000
  60. [ 0.303906] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
  61. [ 0.304052] pci 0000:00:0e.0: supports D2
  62. [ 0.304073] pci 0000:00:0e.0: PME# supported from D3cold
  63. [ 0.304531] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  64. [ 0.304596] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
  65. [ 0.321128] clocksource: Switched to clocksource MIPS
  66. [ 0.328651] NET: Registered protocol family 2
  67. [ 0.334862] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  68. [ 0.341831] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  69. [ 0.348217] TCP: Hash tables configured (established 1024 bind 1024)
  70. [ 0.354803] UDP hash table entries: 256 (order: 0, 4096 bytes)
  71. [ 0.360625] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  72. [ 0.367378] NET: Registered protocol family 1
  73. [ 0.371797] PCI: CLS 0 bytes, default 32
  74. [ 0.763314] gptu: totally 6 16-bit timers/counters
  75. [ 0.768290] gptu: misc_register on minor 63
  76. [ 0.772429] gptu: succeeded to request irq 126
  77. [ 0.776932] gptu: succeeded to request irq 127
  78. [ 0.781448] gptu: succeeded to request irq 128
  79. [ 0.785959] gptu: succeeded to request irq 129
  80. [ 0.790472] gptu: succeeded to request irq 130
  81. [ 0.794987] gptu: succeeded to request irq 131
  82. [ 0.806272] lantiq,vmmc 1f103000.vmmc: requested GPIO 511
  83. [ 0.811632] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03a00000
  84. [ 0.819291] Crashlog allocated RAM at address 0x3f00000
  85. [ 0.828287] workingset: timestamp_bits=30 max_order=14 bucket_order=0
  86. [ 0.850739] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  87. [ 0.856512] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  88. [ 1.025904] io scheduler noop registered
  89. [ 1.029767] io scheduler deadline registered (default)
  90. [ 1.035866] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
  91. [ 1.044832] console [ttyLTQ0] enabled
  92. [ 1.051936] bootconsole [early0] disabled
  93. [ 1.061418] lantiq nor flash device: 02000000 at 10000000
  94. [ 1.065653] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022a8
  95. [ 1.074676] ltq_nor: Found an alias at 0x400000 for the chip at 0x0
  96. [ 1.074717] ltq_nor: Found an alias at 0x800000 for the chip at 0x0
  97. [ 1.074754] ltq_nor: Found an alias at 0xc00000 for the chip at 0x0
  98. [ 1.074919] Amd/Fujitsu Extended Query Table at 0x0040
  99. [ 1.079654] Amd/Fujitsu Extended Query version 1.1.
  100. [ 1.084518] number of CFI chips: 1
  101. [ 1.087870] 4 fixed-partitions partitions found on MTD device ltq_nor
  102. [ 1.094064] Creating 4 MTD partitions on "ltq_nor":
  103. [ 1.098803] 0x000000000000-0x000000010000 : "uboot"
  104. [ 1.110091] 0x000000010000-0x000000020000 : "uboot_env"
  105. [ 1.117834] 0x000000020000-0x0000003f0000 : "firmware"
  106. [ 1.145157] random: fast init done
  107. [ 1.171086] 0x0000003f0000-0x000000400000 : "boardconfig"
  108. [ 1.181031] libphy: Fixed MDIO Bus: probed
  109. [ 1.388147] libphy: ltq_mii: probed
  110. [ 1.491399] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
  111. [ 1.497216] Realtek RTL8306S 1e180000.etop-ffffffff:00: attached PHY driver [Realtek RTL8306S] (mii_bus:phy_addr=1e180000.etop-ffffffff:00, irq=-1)
  112. [ 1.512040] wdt 1f8803f0.watchdog: Init done
  113. [ 1.521278] NET: Registered protocol family 10
  114. [ 1.536776] NET: Registered protocol family 17
  115. [ 1.539899] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  116. [ 1.552371] 8021q: 802.1Q VLAN Support v1.8
  117. [ 1.562347] ath5k,eeprom 10000000.fpi:localbus@0:ath5k_eep: loaded ath5k eeprom
  118. [ 1.572217] OF: fdt:not creating '/sys/firmware/fdt': CRC check failed
  119. [ 1.614377] Freeing unused kernel memory: 5920K
  120. [ 1.617473] This architecture does not have kernel memory protection.
  121. [ 1.651704] init: Console is alive
  122. [ 1.654201] init: - watchdog -
  123. [ 1.684414] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  124. [ 1.695965] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  125. [ 1.712456] init: - preinit -
  126. [ 1.959355] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  127. [ 2.981322] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  128. [ 5.219138] procd: - early -
  129. [ 5.220799] procd: - watchdog -
  130. [ 5.821214] procd: - watchdog -
  131. [ 5.823699] procd: - ubus -
  132. [ 5.839402] random: ubusd: uninitialized urandom read (4 bytes read)
  133. [ 5.876954] random: ubusd: uninitialized urandom read (4 bytes read)
  134. [ 5.882711] random: ubusd: uninitialized urandom read (4 bytes read)
  135. [ 5.891222] procd: - init -
  136. [ 6.233640] kmodloader: loading kernel modules from /etc/modules.d/*
  137. [ 6.245524] ip6_tables: (C) 2000-2006 Netfilter Core Team
  138. [ 6.271022] ip_tables: (C) 2000-2006 Netfilter Core Team
  139. [ 6.287917] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  140. [ 6.375651] xt_time: kernel timezone is -0000
  141. [ 6.394486] PPP generic driver version 2.4.2
  142. [ 6.402367] NET: Registered protocol family 24
  143. [ 6.411841] kmodloader: done loading kernel modules from /etc/modules.d/*
  144. [ 7.822308] urandom_read: 5 callbacks suppressed
  145. [ 7.822323] random: jshn: uninitialized urandom read (4 bytes read)
  146. [ 7.934397] random: jshn: uninitialized urandom read (4 bytes read)
  147. [ 22.719887] br-lan: port 1(eth0) entered blocking state
  148. [ 22.723692] br-lan: port 1(eth0) entered disabled state
  149. [ 22.729556] device eth0 entered promiscuous mode
  150. [ 22.801563] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  151. [ 23.717386] br-lan: port 1(eth0) entered blocking state
  152. [ 23.721093] br-lan: port 1(eth0) entered forwarding state
  153. [ 23.753275] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  154. [ 51.405256] random: crng init done
RAW Paste Data