API tools faq
paste
Guest User

P.RG A4101N error

a guest
Jan 12th, 2020
339
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.97 KB | None | 0 0
raw download clone embed print report
  1. CPUI
  2. L1CI
  3. DRAM
  4. ----
  5. PHYS
  6. ZQDN
  7. PHYE
  8. DINT
  9. LSYN
  10. USYN
  11. MSYN
  12. LMBE
  13. PASS
  14. ----
  15. ZBSS
  16. CODE
  17. DATA
  18. L12F
  19. MAIN
  20.  
  21.  
  22. CFE version 1.0.38-112.37-S for BCM96328 (32bit,SP,BE)
  23. Build Date: Fri Sep 6 15:55:18 CEST 2013 (e.bovisio@quelo)
  24. Copyright (C) 2000-2011 Broadcom Corporation.
  25.  
  26. HS Serial flash device: name S25FL128, id 0x0118 size 16384KB
  27. Total Flash size: 16384K with 256 sectors
  28. Enabling RGMII ID mode
  29. Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
  30. Main Thread: TP0
  31. Memory Test Passed
  32. Total Memory: 67108864 bytes (64MB)
  33. Boot Address: 0xb8000000
  34.  
  35. loading main image ...
  36. Board IP address : 192.168.1.1:ffffff00
  37. Host IP address : 192.168.1.100
  38. Gateway IP address : 192.168.1.1
  39. Run from flash/host (f/h) : f
  40. Default host run file name : vmlinux
  41. Default host flash file name : bcm963xx_fs_kernel
  42. Boot delay (0-9 seconds) : 1
  43. Board Id (0-10) : 96328avngv
  44. Number of MAC Addresses (1-32) : 10
  45. Base MAC Address : f0:84:2f:7d:f8:e1
  46. PSI Size (1-64) KBytes : 24
  47. Enable Backup PSI [0|1] : 0
  48. System Log Size (0-256) KBytes : 0
  49. Main Thread Number [0|1] : 1
  50. Voice Board Configuration (0-0) : LE89116
  51.  
  52. *** Press any key to stop auto run (1 seconds) ***
  53. Auto run second count down: 0
  54. loading main image ...
  55. Booting from only image (0xb810ff00) ...
  56. Code Address: 0x80010000, Entry Address: 0x80258af0
  57. Verifying tag and kernel signature...
  58. Signature OK
  59. Verifying rootfs signature...
  60. Signature OK
  61. Decompression OK!
  62. Entry at 0x80258af0
  63. Closing network.
  64. Disabling Switch ports.
  65. Flushing Receive Buffers...
  66. 0 buffers found.
  67. Closing DMA Channels.
  68. Starting program at 0x80258af0
  69. [ 0.000000] Linux version 2.6.30 (f.bellintani@quelo) (gcc version 4.3.3 (GCC) ) #1 Tue Dec 16 11:58:52 CET 2014
  70. [ 0.000000] HS Serial flash device: name S25FL128, id 0x0118 size 16384KB
  71. [ 0.000000] 96328avngv prom init
  72. [ 0.000000] CPU revision is: 0002a075 (Broadcom4350)
  73. [ 0.000000] DSL SDRAM reserved: 0x100000
  74. [ 0.000000] Determined physical RAM map:
  75. [ 0.000000] memory: 03f00000 @ 00000000 (usable)
  76. [ 0.000000] Zone PFN ranges:
  77. [ 0.000000] DMA 0x00000000 -> 0x00001000
  78. [ 0.000000] Normal 0x00001000 -> 0x00003f00
  79. [ 0.000000] Movable zone start PFN for each node
  80. [ 0.000000] early_node_map[1] active PFN ranges
  81. [ 0.000000] 0: 0x00000000 -> 0x00003f00
  82. [ 0.000000] On node 0 totalpages: 16128
  83. [ 0.000000] free_area_init_node: node 0, pgdat 802de720, node_mem_map 81000000
  84. [ 0.000000] DMA zone: 32 pages used for memmap
  85. [ 0.000000] DMA zone: 0 pages reserved
  86. [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
  87. [ 0.000000] Normal zone: 94 pages used for memmap
  88. [ 0.000000] Normal zone: 11938 pages, LIFO batch:1
  89. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16002
  90. [ 0.000000] Kernel command line: root=31:2 ro noinitrd console=ttyS0,115200 init=/sbin/init
  91. [ 0.000000] wait instruction: enabled
  92. [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
  93. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  94. [ 0.000000] NR_IRQS:128
  95. [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
  96. [ 0.000000] console [ttyS0] enabled
  97. [ 0.001000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  98. [ 0.002000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  99. [ 0.003000] Allocating memory for DSP module core and initialization code
  100. [ 0.004000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0
  101. [ 0.016000] Memory: 60636k/64512k available (2361k kernel code, 3856k reserved, 515k data, 120k init, 0k highmem)
  102. [ 0.017000] Calibrating delay loop... 319.48 BogoMIPS (lpj=159744)
  103. [ 0.039000] Mount-cache hash table entries: 512
  104. [ 0.040000] --Kernel Config--
  105. [ 0.041000] SMP=0
  106. [ 0.042000] PREEMPT=0
  107. [ 0.043000] DEBUG_SPINLOCK=0
  108. [ 0.044000] DEBUG_MUTEXES=0
  109. [ 0.045000] Broadcom Logger v0.1 Dec 16 2014 11:56:40
  110. [ 0.052000] net_namespace: 816 bytes
  111. [ 0.054000] NET: Registered protocol family 16
  112. [ 0.057000] Total Flash size: 16384K with 256 sectors
  113. [ 0.378000] registering PCI controller with io_map_base unset
  114. [ 0.379000] registering PCI controller with io_map_base unset
  115. [ 0.390000] bio: create slab <bio-0> at 0
  116. [ 0.393000] usbcore: registered new interface driver usbfs
  117. [ 0.394000] usbcore: registered new interface driver hub
  118. [ 0.395000] usbcore: registered new device driver usb
  119. [ 0.398000] pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff]
  120. [ 0.399000] pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff]
  121. [ 0.401000] pci 0000:01:00.0: PME# supported from D0 D3hot
  122. [ 0.402000] pci 0000:01:00.0: PME# disabled
  123. [ 0.403000] pci 0000:02:00.0: reg 10 64bit mmio: [0x000000-0x003fff]
  124. [ 0.404000] pci 0000:02:00.0: supports D1 D2
  125. [ 0.406000] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
  126. [ 0.407000] pci 0000:01:00.0: IO window: disabled
  127. [ 0.408000] pci 0000:01:00.0: MEM window: 0x10f00000-0x10ffffff
  128. [ 0.409000] pci 0000:01:00.0: PREFETCH window: disabled
  129. [ 0.410000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  130. [ 0.411000] PCI: Setting latency timer of device 0000:01:00.0 to 64
  131. [ 0.413000] BLOG v3.0 Initialized
  132. [ 0.414000] BLOG Rule v1.0 Initialized
  133. [ 0.415000] Broadcom IQoS v0.1 Dec 16 2014 11:58:09 initialized
  134. [ 0.416000] Broadcom GBPM v0.1 Dec 16 2014 11:58:09 initialized
  135. [ 0.417000] NET: Registered protocol family 8
  136. [ 0.418000] NET: Registered protocol family 20
  137. [ 0.424000] NET: Registered protocol family 2
  138. [ 0.430000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  139. [ 0.439000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  140. [ 0.446000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  141. [ 0.453000] TCP: Hash tables configured (established 2048 bind 2048)
  142. [ 0.460000] TCP reno registered
  143. [ 0.464000] NET: Registered protocol family 1
  144. [ 0.472000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  145. [ 0.478000] squashfs: version 4.0 with LZMA457 ported by BRCM
  146. [ 0.484000] Registering mini_fo version $Id$
  147. [ 0.488000] JFFS2 version 2.2 (NAND) (ZLIB) (LZMA) (RTIME) (c) 2001-2006 Red Hat, Inc.
  148. [ 0.498000] msgmni has been set to 118
  149. [ 0.506000] io scheduler noop registered (default)
  150. [ 0.518000] PPP generic driver version 2.4.2
  151. [ 0.524000] PPP Deflate Compression module registered
  152. [ 0.529000] PPP BSD Compression module registered
  153. [ 0.534000] NET: Registered protocol family 24
  154. [ 0.546000] Creating 10 MTD partitions on "bcm963xx mtd map driver":
  155. [ 0.552000] 0x0000b8000000-0x0000b8010000 : "CFE"
  156. [ 0.560000] 0x0000b8010000-0x0000b8110000 : "kernel_1"
  157. [ 0.567000] 0x0000b8110000-0x0000b8bd0000 : "rootfs_1"
  158. [ 0.574000] mtd: partition "rootfs_1" set to be root filesystem
  159. [ 0.580000] 0x0000b8010000-0x0000b8bd0000 : "image_1"
  160. [ 0.587000] 0x0000b8bd0000-0x0000b8fd0000 : "image_2"
  161. [ 0.594000] 0x0000b8bd0000-0x0000b8fd0000 : "overlay_1"
  162. [ 0.601000] 0x0000b8fd0000-0x0000b8ff0000 : "conf_fs"
  163. [ 0.609000] 0x0000b8ff0000-0x0000b9000000 : "conf_factory"
  164. [ 0.616000] 0x0000b8010000-0x0000b8fd0000 : "upgrade"
  165. [ 0.623000] 0x0000b8000000-0x0000b9000000 : "flash"
  166. [ 0.630000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  167. [ 0.637000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
  168. [ 0.643000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
  169. [ 0.650000] ehci_hcd 0000:00:0a.0: EHCI Host Controller
  170. [ 0.656000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
  171. [ 0.664000] ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM
  172. [ 0.691000] ehci_hcd 0000:00:0a.0: irq 50, io mem 0x10002500
  173. [ 0.702000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00, overcurrent ignored
  174. [ 0.710000] usb usb1: configuration #1 chosen from 1 choice
  175. [ 0.717000] hub 1-0:1.0: USB hub found
  176. [ 0.721000] hub 1-0:1.0: 1 port detected
  177. [ 0.727000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  178. [ 0.734000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
  179. [ 0.740000] PCI: Setting latency timer of device 0000:00:09.0 to 64
  180. [ 0.746000] ohci_hcd 0000:00:09.0: OHCI Host Controller
  181. [ 0.752000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
  182. [ 0.760000] ohci_hcd 0000:00:09.0: irq 49, io mem 0x10002600
  183. [ 0.822000] usb usb2: configuration #1 chosen from 1 choice
  184. [ 0.828000] hub 2-0:1.0: USB hub found
  185. [ 0.832000] hub 2-0:1.0: 1 port detected
  186. [ 0.838000] brcmboard: brcm_board_init entry
  187. [ 0.843000] SES: Button Interrupt 0x1 is enabled
  188. [ 0.848000] bcm963xx-flash.0: failed to claim resource 0
  189. [ 0.854000] Serial: BCM63XX driver $Revision: 3.00 $
  190. [ 0.859000] Magic SysRq enabled (type ^ h for list of supported commands)
  191. [ 0.867000] ttyS0 at MMIO 0xb0000100 (irq = 36) is a BCM63XX
  192. [ 0.874000] ttyS1 at MMIO 0xb0000120 (irq = 47) is a BCM63XX
  193. [ 0.880000] Total # RxBds=792
  194. [ 0.883000] bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
  195. [ 0.883000]
  196. [ 0.891000] BCM63xx_ENET: Broadcom BCM6328B0 ATM/PTM Network Device v0.3 Dec 16 2014 11:57:37
  197. [ 0.901000] GACT probability NOT on
  198. [ 0.905000] u32 classifier
  199. [ 0.908000] input device check on
  200. [ 0.911000] Actions configured
  201. [ 0.917000] TCP cubic registered
  202. [ 0.921000] Initializing XFRM netlink socket
  203. [ 0.925000] NET: Registered protocol family 17
  204. [ 0.930000] NET: Registered protocol family 15
  205. [ 0.935000] Bridge firewalling registered
  206. [ 0.939000] Initializing MCPD Module
  207. [ 0.942000] Ebtables v2.0 registered
  208. [ 0.947000] ebt_time registered
  209. [ 0.950000] ebt_ftos registered
  210. [ 0.953000] ebt_wmm_mark registered
  211. [ 0.957000] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
  212. [ 0.964000] All bugs added by David S. Miller <[email protected]>
  213. [ 0.979000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  214. [ 0.988000] Freeing unused kernel memory: 120k freed
  215. init started: BusyBox v1.17.3 (2014-12-16 11:24:02 CET)
  216. init: setting virtual memory limit 8388608 -1
  217.  
  218. Starting /etc/rc.d/S10boot.sh ...
  219. Mounting /dev/mtdblock5 (JFFS2) for overlay ...
  220. Mounting overlay using mini_fo ...
  221. [ 2.294000] mini_fo: using base directory: /
  222. [ 2.299000] mini_fo: using storage directory: /overlay
  223. pivot_root ...
  224. mount usb...
  225. Restore passwd ....
  226. Restore group ....
  227.  
  228. Please press Enter to activate this console. Tue Dec 16 10:18:11 UTC 2014
  229. Starting /etc/rc.d/S11services.sh ...
  230.  
  231.  
  232. -- Base System Init [3.84]
  233.  
  234. [*] Starting Event Controller
  235. [*] Loading Drivers and Kernel Modules
  236. [*] Starting Configuration Load
  237. [*] Starting Configuration Manager (B)
  238. [ 7.115000] eth0 Link UP 100 mbps full duplex
  239. Powered down
  240. Powered down
  241. Powered down
  242. Powered down
  243. [ 9.137000] eth0 Link DOWN.
  244.  
  245. OK
  246. Login:
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!