API tools faq
paste
Advertisement
Guest User

Beagleboard Ubuntu serial lirc

a guest
Aug 24th, 2011
235
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.32 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.0.0-x2 (root@beagle-256mb-0) (gcc version 4.5.2 $
  4. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
  5. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] Machine: OMAP3 Beagle Board
  7. [ 0.000000] Beagle expansionboard: none
  8. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  10. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  11. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  12. [ 0.000000] On node 0 totalpages: 126464
  13. [ 0.000000] free_area_init_node: node 0, pgdat c08dd3e0, node_mem_map c09a40$
  14. [ 0.000000] Normal zone: 1024 pages used for memmap
  15. [ 0.000000] Normal zone: 0 pages reserved
  16. [ 0.000000] Normal zone: 125440 pages, LIFO batch:31
  17. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  18. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  19. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0da8000 s7712 r8192 d12768 u32768
  20. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  21. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0da8000 s7712 r8192 d12768 u32768
  22. [ 0.000000] pcpu-alloc: s7712 r8192 d12768 u32768 alloc=8*4096
  23. [ 0.000000] pcpu-alloc: [0] 0
  24. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa$
  25. [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 root=/d$
  26. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  27. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  28. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  29. [ 0.000000] allocated 2097152 bytes of page_cgroup
  30. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memo$
  31. [ 0.000000] Memory: 494MB = 494MB total
  32. [ 0.000000] Memory: 485788k/485788k available, 38500k reserved, 0K highmem
  33. [ 0.000000] Virtual kernel memory layout:
  34. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  35. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  36. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  37. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  38. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  39. [ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  40. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  41. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  42. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  43. [ 0.000000] .init : 0xc0008000 - 0xc0060000 ( 352 kB)
  44. [ 0.000000] .text : 0xc0060000 - 0xc086bbe8 (8239 kB)
  45. [ 0.000000] .data : 0xc086c000 - 0xc08df2b0 ( 461 kB)
  46. [ 0.000000] .bss : 0xc08df2d4 - 0xc09a30f8 ( 784 kB)
  47. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, $
  48. [ 0.000000] Hierarchical RCU implementation.
  49. [ 0.000000] NR_IRQS:410
  50. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrup$
  51. [ 0.000000] Total of 96 interrupts on 1 active controller
  52. [ 0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.
  53. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  54. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 1$
  55. [ 0.000000] Console: colour dummy device 80x30
  56. [ 0.000000] console [tty0] enabled
  57. [ 0.000701] Calibrating delay loop... 531.48 BogoMIPS (lpj=2076672)
  58. [ 0.083496] pid_max: default: 32768 minimum: 301
  59. [ 0.083709] Security Framework initialized
  60. [ 0.083770] AppArmor: AppArmor initialized
  61. [ 0.084045] Mount-cache hash table entries: 512
  62. [ 0.084777] Initializing cgroup subsys cpuacct
  63. [ 0.084838] Initializing cgroup subsys memory
  64. [ 0.084899] Initializing cgroup subsys devices
  65. [ 0.084930] Initializing cgroup subsys freezer
  66. [ 0.085052] CPU: Testing write buffer coherency: ok
  67. [ 0.085327] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counte$
  68. [ 0.086059] Brought up 1 CPUs
  69. [ 0.086090] SMP: Total of 1 processors activated (531.48 BogoMIPS).
  70. [ 0.086669] devtmpfs: initialized
  71. [ 0.089874] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
  72. [ 0.089904] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
  73. [ 0.089935] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
  74. [ 0.104095] omap_hwmod: i2c1: softreset failed (waited 10000 usec)
  75. [ 0.117034] omap_hwmod: i2c2: softreset failed (waited 10000 usec)
  76. [ 0.129974] omap_hwmod: i2c3: softreset failed (waited 10000 usec)
  77. [ 0.131469] print_constraints: dummy:
  78. [ 0.131805] NET: Registered protocol family 16
  79. [ 0.131988] GPMC revision 5.0
  80. [ 0.133209] OMAP GPIO hardware version 2.5
  81. [ 0.133422] OMAP GPIO hardware version 2.5
  82. [ 0.133636] OMAP GPIO hardware version 2.5
  83. [ 0.133850] OMAP GPIO hardware version 2.5
  84. [ 0.134033] OMAP GPIO hardware version 2.5
  85. [ 0.134246] OMAP GPIO hardware version 2.5
  86. [ 0.134887] omap_mux_init: Add partition: #1: core, flags: 0
  87. [ 0.135986] OMAP3 Beagle Rev: xM C
  88. [ 0.140167] Found NAND on CS0
  89. [ 0.140197] Registering NAND on CS0
  90. [ 0.140502] Unable to get DVI reset GPIO
  91. [ 0.140563] hw-breakpoint: debug architecture 0x4 unsupported.
  92. [ 0.143249] OMAP DMA hardware revision 5.0
  93. [ 0.150115] bio: create slab <bio-0> at 0
  94. [ 0.151336] SCSI subsystem initialized
  95. [ 0.152648] usbcore: registered new interface driver usbfs
  96. [ 0.152770] usbcore: registered new interface driver hub
  97. [ 0.153045] usbcore: registered new device driver usb
  98. [ 0.153808] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
  99. [ 0.156616] twl4030: PIH (irq 7) chaining IRQs 368..375
  100. [ 0.156677] twl4030: power (irq 373) chaining IRQs 376..383
  101. [ 0.157196] twl4030: gpio (irq 368) chaining IRQs 384..401
  102. [ 0.160430] print_constraints: VUSB1V5: 1500 mV normal standby
  103. [ 0.160858] print_constraints: VUSB1V8: 1800 mV normal standby
  104. [ 0.161285] print_constraints: VUSB3V1: 3100 mV normal standby
  105. [ 0.163208] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  106. [ 0.164001] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal st$
  107. [ 0.164459] print_constraints: VDAC: 1800 mV normal standby
  108. [ 0.164886] print_constraints: VDVI: 1800 mV normal standby
  109. [ 0.165405] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal sta$
  110. [ 0.165740] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  111. [ 0.173828] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
  112. [ 0.174804] Advanced Linux Sound Architecture Driver Version 1.0.24.
  113. [ 0.175476] NetLabel: Initializing
  114. [ 0.175506] NetLabel: domain hash size = 128
  115. [ 0.175537] NetLabel: protocols = UNLABELED CIPSOv4
  116. [ 0.175598] NetLabel: unlabeled traffic allowed by default
  117. [ 0.175933] Switching to clocksource 32k_counter
  118. [ 0.180938] Switched to NOHz mode on CPU #0
  119. [ 0.190765] AppArmor: AppArmor Filesystem Enabled
  120. [ 0.201843] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
  121. [ 0.205169] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bul$
  122. [ 0.205230] musb-hdrc: MHDRC RTL version 1.800
  123. [ 0.205230] musb-hdrc: setup fifo_mode 5
  124. [ 0.205261] musb-hdrc: 28/31 max ep, 8192/16384 memory
  125. [ 0.205505] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using D$
  126. [ 0.206085] NET: Registered protocol family 2
  127. [ 0.206451] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  128. [ 0.207641] TCP established hash table entries: 16384 (order: 5, 131072 byte$
  129. [ 0.208038] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  130. [ 0.208374] TCP: Hash tables configured (established 16384 bind 16384)
  131. [ 0.208404] TCP reno registered
  132. [ 0.208435] UDP hash table entries: 256 (order: 1, 8192 bytes)
  133. [ 0.208496] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  134. [ 0.208953] NET: Registered protocol family 1
  135. [ 0.209686] RPC: Registered named UNIX socket transport module.
  136. [ 0.209747] RPC: Registered udp transport module.
  137. [ 0.209777] RPC: Registered tcp transport module.
  138. [ 0.209777] RPC: Registered tcp NFSv4.1 backchannel transport module.
  139. [ 0.210083] Trying to unpack rootfs image as initramfs...
  140. [ 0.578491] Freeing initrd memory: 3604K
  141. [ 0.579406] PMU: registered new PMU device of type 0
  142. [ 0.579925] omap_dsp_init: 600000 bytes @ 9ee00000
  143. [ 0.580596] audit: initializing netlink socket (disabled)
  144. [ 0.580688] type=2000 audit(0.593:1): initialized
  145. [ 0.736663] VFS: Disk quotas dquot_6.5.2
  146. [ 0.737091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  147. [ 0.740722] Registering unionfs 2.5.9 (for 2.6.39-rc5)
  148. [ 0.742004] fuse init (API version 7.16)
  149. [ 0.743286] Btrfs loaded
  150. [ 0.743347] msgmni has been set to 955
  151. [ 0.744720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major $
  152. [ 0.744781] io scheduler noop registered
  153. [ 0.744781] io scheduler deadline registered
  154. [ 0.744903] io scheduler cfq registered (default)
  155. [ 0.801086] OMAP DSS rev 2.0
  156. [ 0.802917] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  157. [ 0.804046] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  158. [ 0.804290] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  159. [ 0.804504] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  160. [ 1.620178] console [ttyO2] enabled
  161. [ 1.624114] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  162. [ 1.637542] brd: module loaded
  163. [ 1.643585] loop: module loaded
  164. [ 1.649505] omap2-nand driver initializing
  165. [ 1.654235] No NAND device found.
  166. [ 1.657958] No NAND device found.
  167. [ 1.661651] OneNAND driver initializing
  168. [ 1.666046] usbcore: registered new interface driver cdc_ether
  169. [ 1.672271] usbcore: registered new interface driver rndis_host
  170. [ 1.678527] cdc_ncm: 01-June-2011
  171. [ 1.682037] usbcore: registered new interface driver cdc_ncm
  172. [ 1.688354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  173. [ 3.707427] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  174. [ 3.713623] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb$
  175. [ 3.721496] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  176. [ 3.738555] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  177. [ 3.745239] hub 1-0:1.0: USB hub found
  178. [ 3.749267] hub 1-0:1.0: 3 ports detected
  179. [ 3.777740] Initializing USB Mass Storage driver...
  180. [ 3.782958] usbcore: registered new interface driver usb-storage
  181. [ 3.789306] USB Mass Storage support registered.
  182. [ 3.797149] g_ether gadget: using random self ethernet address
  183. [ 3.803344] g_ether gadget: using random host ethernet address
  184. [ 3.810394] usb0: MAC d2:32:dc:c7:04:4f
  185. [ 3.814453] usb0: HOST MAC 16:e4:eb:65:11:89
  186. [ 3.819000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  187. [ 3.825958] g_ether gadget: g_ether ready
  188. [ 3.830169] musb-hdrc musb-hdrc: MUSB HDRC host driver
  189. [ 3.835845] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number$
  190. [ 3.844085] hub 2-0:1.0: USB hub found
  191. [ 3.848114] hub 2-0:1.0: 1 port detected
  192. [ 3.852722] mousedev: PS/2 mouse device common for all mice
  193. [ 3.859344] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2$
  194. [ 3.871032] i2c /dev entries driver
  195. [ 3.875244] lirc_dev: IR Remote Control driver registered, major 250
  196. [ 3.882568] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  197. [ 3.889556] device-mapper: uevent: version 1.0.3
  198. [ 3.894927] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-$
  199. [ 3.904418] device-mapper: multipath: version 1.3.0 loaded
  200. [ 3.910217] device-mapper: multipath round-robin: version 1.0.0 loaded
  201. [ 3.917541] cpuidle: using governor ladder
  202. [ 3.921905] cpuidle: using governor menu
  203. [ 3.926086] sdhci: Secure Digital Host Controller Interface driver
  204. [ 3.932556] sdhci: Copyright(c) Pierre Ossman
  205. [ 3.938720] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16
  206. [ 3.945587] Registered led device: beagleboard::usr0
  207. [ 3.945678] Registered led device: beagleboard::usr1
  208. [ 3.947143] Registered led device: beagleboard::pmu_stat
  209. [ 3.947784] usbcore: registered new interface driver snd-usb-6fire
  210. [ 3.955505] OMAP3 Beagle/Devkit8000 SoC init
  211. [ 4.042816] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  212. [ 4.049682] ALSA device list:
  213. [ 4.052856] #0: omap3beagle
  214. [ 4.057250] TCP cubic registered
  215. [ 4.061553] NET: Registered protocol family 10
  216. [ 4.069396] NET: Registered protocol family 17
  217. [ 4.074432] Registering the dns_resolver key type
  218. [ 4.079467] VFP support v0.3: implementor 41 architecture 3 part 30 variant $
  219. [ 4.087554] ThumbEE CPU extension supported.
  220. [ 4.092071] Registering SWP/SWPB emulation handler
  221. [ 4.098785] usb 1-2: new high speed USB device number 2 using ehci-omap
  222. [ 4.107818] sr_init: No PMIC hook to init smartreflex
  223. [ 4.113342] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver ini$
  224. [ 4.121704] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver ini$
  225. [ 4.129974] SmartReflex Class3 initialized
  226. [ 4.139862] clock: disabling unused clocks to save power
  227. [ 4.146423] registered taskstats version 1
  228. [ 4.150970] fbcvt: 1280x720@60: CVT Name - .921M9-R
  229. [ 4.176788] Console: switching to colour frame buffer device 160x45
  230. [ 4.193572] regulator_init_complete: VDAC: incomplete constraints, leaving on
  231. [ 4.201293] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  232. [ 4.208282] Freeing init memory: 352K
  233. [ 4.278961] hub 1-2:1.0: USB hub found
  234. [ 4.285827] hub 1-2:1.0: 5 ports detected
  235. [ 4.304138] mmc0: host does not support reading read-only switch. assuming w$
  236. [ 4.324737] mmc0: new SD card at address e624
  237. [ 4.332733] mmcblk0: mmc0:e624 SU02G 1.89 GiB
  238. [ 4.347320] mmcblk0: p1 p2
  239. [ 4.397125] udev[67]: starting version 167
  240. [ 4.582824] usb 1-2.1: new high speed USB device number 3 using ehci-omap
  241. [ 5.679382] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. $
  242. [ 7.096405] udev[240]: starting version 167
  243. [ 7.169677] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  244. [ 7.593688] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  245. [ 7.981414] rtc-ds1307: probe of 2-0068 failed with error -5
  246. [ 7.994415] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  247. [ 7.998291] twl_rtc twl_rtc: Power up reset detected.
  248. [ 8.015228] twl_rtc twl_rtc: Enabling TWL-RTC.
  249. [ 8.697906] smsc95xx v1.0.4
  250. [ 8.850006] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0$
  251. [ 8.850189] usbcore: registered new interface driver smsc95xx
  252. [ 10.743041] lirc_serial: module is from the staging directory, the quality i$
  253. [ 10.744659] Unable to handle kernel NULL pointer dereference at virtual addr$
  254. [ 10.753448] pgd = dea6c000
  255. [ 10.756530] [000003f9] *pgd=9eb0f831, *pte=00000000, *ppte=00000000
  256. [ 10.763305] Internal error: Oops: 17 [#1] SMP
  257. [ 10.767913] Modules linked in: lirc_serial(C+) smsc95xx rtc_ds1307 rtc_twl t$
  258. [ 10.777984] CPU: 0 Tainted: G C (3.0.0-x2 #1)
  259. [ 10.783813] PC is at hardware_init_port+0x30/0x2e4 [lirc_serial]
  260. [ 10.790191] LR is at lirc_serial_init_module+0x2b8/0x474 [lirc_serial]
  261. [ 10.797119] pc : [<bf01a448>] lr : [<bf01e2b8>] psr: 60000013
  262. [ 10.797119] sp : ddc3fea0 ip : 000003ff fp : c00dca40
  263. [ 10.809295] r10: 0000001c r9 : 0000099c r8 : bf01e000
  264. [ 10.814819] r7 : 00000000 r6 : bf01b6b0 r5 : bf01bc60 r4 : bf01bc60
  265. [ 10.821746] r3 : 000003f8 r2 : 00000001 r1 : dd871ba0 r0 : dd871ba0
  266. [ 10.828674] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
  267. [ 10.836242] Control: 10c5387d Table: 9ea6c019 DAC: 00000015
  268. [ 10.842315] Process modprobe (pid: 496, stack limit = 0xddc3e2f8)
  269. [ 10.848785] Stack: (0xddc3fea0 to 0xddc40000)
  270. [ 10.853393] fea0: 00000000 bf01bc60 bf01b6b0 00000000 bf01e000 bf01e2b8 0000$
  271. [ 10.862091] fec0: c08df2e0 bf01baf0 ddc3e000 00000000 bf01e000 0000099c 0000$
  272. [ 10.870758] fee0: bf01baf0 c00c9aac 00000000 0000cb9f 0000099c bf01bb38 bf01$
  273. [ 10.879425] ff00: 00000001 dde03ec0 00000001 0000001c c00dca40 c00ddcd8 bf01$
  274. [ 10.888092] ff20: ddc27b1c 00000000 bf01bc4c ddc3e000 c087b084 00296380 c08b$
  275. [ 10.896759] ff40: 00005e38 e08222ac e08220e5 e082449c ddfaf400 00001cd4 0000$
  276. [ 10.905426] ff60: 00000000 00000029 0000002a 00000021 0000001e 0000001a 0000$
  277. [ 10.914093] ff80: 00000000 beb8aa44 002971e0 00000000 00000080 c0065ae4 ddc3$
  278. [ 10.922760] ffa0: 00000000 c0065960 beb8aa44 002971e0 40047000 00005e38 0029$
  279. [ 10.931427] ffc0: beb8aa44 002971e0 00000000 00000080 0000b979 002971ec 0029$
  280. [ 10.940124] ffe0: 00017edc beb8a9a8 0000aedf 401fbae0 60000010 40047000 0000$
  281. [ 10.948822] [<bf01a448>] (hardware_init_port+0x30/0x2e4 [lirc_serial]) from $
  282. [ 10.962219] [<bf01e2b8>] (lirc_serial_init_module+0x2b8/0x474 [lirc_serial])$
  283. [ 10.974029] [<c00606b0>] (do_one_initcall+0x34/0x174) from [<c00ddcd8>] (sys$
  284. [ 10.983825] [<c00ddcd8>] (sys_init_module+0xf0/0x1b14) from [<c0065960>] (re$
  285. [ 10.993499] Code: 03a02001 15943004 11a02312 e5943008 (e7d28003)
  286. [ 11.000488] ---[ end trace d519e81fb0c0f6f1 ]---
  287. [ 11.980377] smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC$
  288. [ 21.308959] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!