Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 21.215]
- X.Org X Server 1.20.13
- X Protocol Version 11, Revision 0
- [ 21.216] Build Operating System: NetBSD/amd64 9.99.93 - The NetBSD Foundation, Inc.
- [ 21.216] Current Operating System: NetBSD mybox 9.99.93 NetBSD 9.99.93 (GENERIC) #0: Sun Dec 26 08:41:29 UTC 2021 mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC amd64
- [ 21.216] Build Date: 23 August 2021 11:23:23PM
- [ 21.216]
- [ 21.217] Current version of pixman: 0.38.4
- [ 21.217] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 21.217] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 21.217] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 27 11:06:56 2021
- [ 21.218] (II) Loader magic: 0x4aa96ba0
- [ 21.218] (II) Module ABI versions:
- [ 21.218] X.Org ANSI C Emulation: 0.4
- [ 21.218] X.Org Video Driver: 24.1
- [ 21.218] X.Org XInput driver : 24.1
- [ 21.218] X.Org Server Extension : 10.0
- [ 21.223] (WW) checkDevMem: failed to open /dev/mem (Operation not permitted)
- [ 21.223] (--) PCI:*(0@0:2:0) 8086:0a16:103c:1991 rev 11, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003000/64
- [ 21.224] (==) Using default built-in configuration (39 lines)
- [ 21.224] (==) --- Start of built-in configuration ---
- [ 21.224] Section "Device"
- [ 21.224] Identifier "Builtin Default intel Device 0"
- [ 21.224] Driver "intel"
- [ 21.224] EndSection
- [ 21.224] Section "Screen"
- [ 21.224] Identifier "Builtin Default intel Screen 0"
- [ 21.224] Device "Builtin Default intel Device 0"
- [ 21.224] EndSection
- [ 21.224] Section "Device"
- [ 21.224] Identifier "Builtin Default modesetting Device 0"
- [ 21.224] Driver "modesetting"
- [ 21.224] EndSection
- [ 21.224] Section "Screen"
- [ 21.224] Identifier "Builtin Default modesetting Screen 0"
- [ 21.224] Device "Builtin Default modesetting Device 0"
- [ 21.224] EndSection
- [ 21.224] Section "Device"
- [ 21.224] Identifier "Builtin Default vesa Device 0"
- [ 21.224] Driver "vesa"
- [ 21.224] EndSection
- [ 21.224] Section "Screen"
- [ 21.224] Identifier "Builtin Default vesa Screen 0"
- [ 21.224] Device "Builtin Default vesa Device 0"
- [ 21.224] EndSection
- [ 21.224] Section "Device"
- [ 21.224] Identifier "Builtin Default wsfb Device 0"
- [ 21.224] Driver "wsfb"
- [ 21.224] EndSection
- [ 21.224] Section "Screen"
- [ 21.225] Identifier "Builtin Default wsfb Screen 0"
- [ 21.225] Device "Builtin Default wsfb Device 0"
- [ 21.225] EndSection
- [ 21.225] Section "ServerLayout"
- [ 21.225] Identifier "Builtin Default Layout"
- [ 21.225] Screen "Builtin Default intel Screen 0"
- [ 21.225] Screen "Builtin Default modesetting Screen 0"
- [ 21.225] Screen "Builtin Default vesa Screen 0"
- [ 21.225] Screen "Builtin Default wsfb Screen 0"
- [ 21.225] EndSection
- [ 21.225] (==) --- End of built-in configuration ---
- [ 21.225] (==) ServerLayout "Builtin Default Layout"
- [ 21.225] (**) |-->Screen "Builtin Default intel Screen 0" (0)
- [ 21.225] (**) | |-->Monitor "<default monitor>"
- [ 21.227] (**) | |-->Device "Builtin Default intel Device 0"
- [ 21.227] (==) No monitor specified for screen "Builtin Default intel Screen 0".
- Using a default monitor configuration.
- [ 21.227] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
- [ 21.227] (**) | |-->Monitor "<default monitor>"
- [ 21.228] (**) | |-->Device "Builtin Default modesetting Device 0"
- [ 21.228] (==) No monitor specified for screen "Builtin Default modesetting Screen 0".
- Using a default monitor configuration.
- [ 21.228] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
- [ 21.228] (**) | |-->Monitor "<default monitor>"
- [ 21.229] (**) | |-->Device "Builtin Default vesa Device 0"
- [ 21.229] (==) No monitor specified for screen "Builtin Default vesa Screen 0".
- Using a default monitor configuration.
- [ 21.229] (**) |-->Screen "Builtin Default wsfb Screen 0" (3)
- [ 21.229] (**) | |-->Monitor "<default monitor>"
- [ 21.230] (**) | |-->Device "Builtin Default wsfb Device 0"
- [ 21.230] (==) No monitor specified for screen "Builtin Default wsfb Screen 0".
- Using a default monitor configuration.
- [ 21.231] (==) Automatically adding devices
- [ 21.231] (==) Automatically enabling devices
- [ 21.231] (==) Not automatically adding GPU devices
- [ 21.231] (==) Max clients allowed: 256, resource mask: 0x1fffff
- [ 21.232] (==) FontPath set to:
- /usr/X11R7/lib/X11/fonts/misc/,
- /usr/X11R7/lib/X11/fonts/TTF/,
- /usr/X11R7/lib/X11/fonts/Type1/,
- /usr/X11R7/lib/X11/fonts/75dpi/,
- /usr/X11R7/lib/X11/fonts/100dpi/
- [ 21.232] (==) ModulePath set to "/usr/X11R7/lib/modules"
- [ 21.232] (II) The server relies on wscons to provide the list of input devices.
- If no devices become available, reconfigure wscons or disable AutoAddDevices.
- [ 21.232] (II) LoadModule: "glx"
- [ 21.236] (II) Loading /usr/X11R7/lib/modules/extensions/libglx.so
- [ 21.238] (II) Module glx: vendor="X.Org Foundation"
- [ 21.238] compiled for 1.20.13, module version = 1.0.0
- [ 21.238] ABI class: X.Org Server Extension, version 10.0
- [ 21.238] (II) LoadModule: "intel"
- [ 21.239] (II) Loading /usr/X11R7/lib/modules/drivers/intel_drv.so
- [ 21.293] (II) Module intel: vendor="X.Org Foundation"
- [ 21.293] compiled for 1.20.13, module version = 2.99.917
- [ 21.293] Module class: X.Org Video Driver
- [ 21.293] ABI class: X.Org Video Driver, version 24.1
- [ 21.294] (II) LoadModule: "modesetting"
- [ 21.294] (II) Loading /usr/X11R7/lib/modules/drivers/modesetting_drv.so
- [ 21.296] (II) Module modesetting: vendor="X.Org Foundation"
- [ 21.296] compiled for 1.20.13, module version = 1.20.13
- [ 21.296] Module class: X.Org Video Driver
- [ 21.296] ABI class: X.Org Video Driver, version 24.1
- [ 21.296] (II) LoadModule: "vesa"
- [ 21.297] (II) Loading /usr/X11R7/lib/modules/drivers/vesa_drv.so
- [ 21.297] (II) Module vesa: vendor="X.Org Foundation"
- [ 21.297] compiled for 1.20.13, module version = 2.5.0
- [ 21.297] Module class: X.Org Video Driver
- [ 21.297] ABI class: X.Org Video Driver, version 24.1
- [ 21.297] (II) LoadModule: "wsfb"
- [ 21.299] (II) Loading /usr/X11R7/lib/modules/drivers/wsfb_drv.so
- [ 21.300] (II) Module wsfb: vendor="X.Org Foundation"
- [ 21.300] compiled for 1.20.13, module version = 0.4.0
- [ 21.300] ABI class: X.Org Video Driver, version 24.1
- [ 21.300] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
- i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
- 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
- Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
- GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
- [ 21.301] (II) intel: Driver for Intel(R) HD Graphics
- [ 21.301] (II) intel: Driver for Intel(R) Iris(TM) Graphics
- [ 21.301] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
- [ 21.301] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
- [ 21.301] (II) VESA: driver for VESA chipsets: vesa
- [ 21.301] (II) wsfb: driver for wsdisplay framebuffer: wsfb
- [ 21.302] (--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode (version 3.32)
- [ 21.302] (--) using VT number 5
- [ 21.312] (WW) xf86EnableIO: Failed to set IOPL for extended I/O(II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200114
- [ 21.322] (WW) Falling back to old probe method for modesetting
- [ 21.323] (WW) Falling back to old probe method for wsfb
- [ 21.323] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
- [ 21.323] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
- [ 21.323] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
- [ 21.323] (II) intel(0): Creating default Display subsection in Screen section
- "Builtin Default intel Screen 0" for depth/fbbpp 24/32
- [ 21.323] (==) intel(0): Depth 24, (--) framebuffer bpp 32
- [ 21.324] (==) intel(0): RGB weight 888
- [ 21.324] (==) intel(0): Default visual is TrueColor
- [ 21.326] (II) intel(0): Output eDP1 has no monitor section
- [ 21.327] (II) intel(0): Enabled output eDP1
- [ 21.327] (II) intel(0): Output DP1 has no monitor section
- [ 21.327] (II) intel(0): Enabled output DP1
- [ 21.327] (II) intel(0): Output HDMI1 has no monitor section
- [ 21.327] (II) intel(0): Enabled output HDMI1
- [ 21.327] (II) intel(0): Output DP2 has no monitor section
- [ 21.327] (II) intel(0): Enabled output DP2
- [ 21.327] (II) intel(0): Output HDMI2 has no monitor section
- [ 21.327] (II) intel(0): Enabled output HDMI2
- [ 21.327] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
- [ 21.327] (II) intel(0): Output VIRTUAL1 has no monitor section
- [ 21.327] (II) intel(0): Enabled output VIRTUAL1
- [ 21.327] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
- [ 21.328] (==) intel(0): TearFree enabled
- [ 21.328] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 21.328] (==) intel(0): DPI set to (96, 96)
- [ 21.328] (II) Loading sub module "dri2"
- [ 21.328] (II) LoadModule: "dri2"
- [ 21.328] (II) Module "dri2" already built-in
- [ 21.328] (II) UnloadModule: "modesetting"
- [ 21.328] (II) Unloading modesetting
- [ 21.328] (II) UnloadModule: "vesa"
- [ 21.328] (II) Unloading vesa
- [ 21.328] (II) UnloadModule: "wsfb"
- [ 21.328] (II) Unloading wsfb
- [ 21.332] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
- [ 21.332] (==) intel(0): Backing store enabled
- [ 21.332] (==) intel(0): Silken mouse enabled
- [ 21.332] (II) intel(0): HW Cursor enabled
- [ 21.335] (==) intel(0): DPMS enabled
- [ 21.336] (II) intel(0): [DRI2] Setup complete
- [ 21.336] (II) intel(0): [DRI2] DRI driver: i965
- [ 21.336] (II) intel(0): [DRI2] VDPAU driver: va_gl
- [ 21.336] (II) intel(0): direct rendering: DRI2 enabled
- [ 21.337] (II) Initializing extension Generic Event Extension
- [ 21.338] (II) Initializing extension SHAPE
- [ 21.339] (II) Initializing extension MIT-SHM
- [ 21.340] (II) Initializing extension XInputExtension
- [ 21.341] (II) Initializing extension XTEST
- [ 21.342] (II) Initializing extension BIG-REQUESTS
- [ 21.344] (II) Initializing extension SYNC
- [ 21.345] (II) Initializing extension XKEYBOARD
- [ 21.346] (II) Initializing extension XC-MISC
- [ 21.347] (II) Initializing extension SECURITY
- [ 21.348] (II) Initializing extension XFIXES
- [ 21.350] (II) Initializing extension XFree86-Bigfont
- [ 21.351] (II) Initializing extension RENDER
- [ 21.352] (II) Initializing extension RANDR
- [ 21.354] (II) Initializing extension COMPOSITE
- [ 21.356] (II) Initializing extension DAMAGE
- [ 21.357] (II) Initializing extension MIT-SCREEN-SAVER
- [ 21.358] (II) Initializing extension DOUBLE-BUFFER
- [ 21.359] (II) Initializing extension RECORD
- [ 21.360] (II) Initializing extension DPMS
- [ 21.362] (II) Initializing extension Present
- [ 21.363] (II) Initializing extension DRI3
- [ 21.363] (II) Initializing extension X-Resource
- [ 21.364] (II) Initializing extension XVideo
- [ 21.365] (II) Initializing extension XVideo-MotionCompensation
- [ 21.365] (II) Initializing extension GLX
- [ 21.418] (II) AIGLX: Loaded and initialized i965
- [ 21.418] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 21.418] (II) Initializing extension XFree86-VidModeExtension
- [ 21.420] (II) Initializing extension XFree86-DGA
- [ 21.421] (II) Initializing extension XFree86-DRI
- [ 21.421] (II) Initializing extension DRI2
- [ 21.434] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
- [ 21.438] (II) intel(0): Setting screen physical size to 361 x 203
- [ 21.831] (II) config/wscons: checking input device /dev/wskbd
- [ 21.831] (II) wskbd: using layout se
- [ 21.831] (II) LoadModule: "kbd"
- [ 21.832] (II) Loading /usr/X11R7/lib/modules/drivers/kbd_drv.so
- [ 21.833] (II) Module kbd: vendor="X.Org Foundation"
- [ 21.833] compiled for 1.20.13, module version = 1.9.0
- [ 21.833] Module class: X.Org XInput Driver
- [ 21.833] ABI class: X.Org XInput driver, version 24.1
- [ 21.833] (II) Using input driver 'kbd' for '/dev/wskbd'
- [ 21.833] (**) /dev/wskbd: always reports core events
- [ 21.833] (**) /dev/wskbd: always reports core events
- [ 21.833] (**) Option "Protocol" "standard"
- [ 21.833] (**) Option "XkbRules" "base"
- [ 21.833] (**) Option "XkbModel" "pc105"
- [ 21.833] (**) Option "XkbLayout" "se"
- [ 21.833] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
- [ 22.004] (II) config/wscons: checking input device /dev/wsmouse
- [ 22.004] (II) LoadModule: "ws"
- [ 22.006] (II) Loading /usr/X11R7/lib/modules/drivers/ws_drv.so
- [ 22.007] (II) Module ws: vendor="X.Org Foundation"
- [ 22.007] compiled for 1.20.13, module version = 1.3.0
- [ 22.007] Module class: X.Org XInput Driver
- [ 22.007] ABI class: X.Org XInput driver, version 24.1
- [ 22.007] (II) Using input driver 'ws' for '/dev/wsmouse'
- [ 22.007] (**) /dev/wsmouse: always reports core events
- [ 22.007] (II) /dev/wsmouse: debuglevel 0
- [ 22.007] (**) /dev/wsmouse: ZAxisMapping: buttons 4 and 5
- [ 22.007] (**) /dev/wsmouse associated screen: 0
- [ 22.007] (**) Option "Device" "/dev/wsmouse"
- [ 22.011] (II) /dev/wsmouse minimum x position: 0
- [ 22.011] (II) /dev/wsmouse maximum x position: 1365
- [ 22.012] (II) /dev/wsmouse minimum y position: 0
- [ 22.012] (II) /dev/wsmouse maximum y position: 767
- [ 22.012] (**) /dev/wsmouse: Buttons: 5
- [ 22.017] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7)
- [ 22.021] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
- [ 22.021] (**) /dev/wsmouse: (accel) acceleration profile 0
- [ 22.022] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
- [ 22.022] (**) /dev/wsmouse: (accel) acceleration threshold: 4
- [ 22.223] (II) intel(0): EDID vendor "BOE", prod id 1525
- [ 22.223] (II) intel(0): Printing DDC gathered Modelines:
- [ 22.223] (II) intel(0): Modeline "1366x768"x0.0 70.12 1366 1414 1446 1485 768 772 776 787 +hsync -vsync (47.2 kHz eP)
- [ 22.223] (II) intel(0): Modeline "1366x768"x0.0 60.20 1366 1466 1566 1750 768 788 808 860 +hsync -vsync (34.4 kHz e)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement