Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 2020.05.29 21:54:54 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 3 and data 020004
- 2020.05.29 21:54:54 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:54:54 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:54:54 5: ModbusRS485: CheckChecksum (called from HandleResponse): fd87 is valid
- 2020.05.29 21:54:54 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:54:54 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:54:54 5: ModbusRS485: HandleResponse calls parseObj with relay device DHW300RELAY for parsing data
- 2020.05.29 21:54:54 5: DHW300RELAY: ParseObj called with data 0004, type h, adr 19, valuesLen 1
- 2020.05.29 21:54:54 5: DHW300RELAY: ParseObj has no information about parsing h19
- 2020.05.29 21:54:54 5: ModbusRS485: HandleResponse got 0 readings from ParseObj for DHW300RELAY
- 2020.05.29 21:54:54 4: ModbusRS485: relaying response back failed because original request is missing
- 2020.05.29 21:54:54 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0203020004fd87, id 2, fCode 3, request: id 2, fCode 3, tid 227, type h, adr 19, len 1, master device DHW300, for relay device DHW300RELAY (relayed), queued 0.06 secs ago, sent 0.06 secs ago, response: id 2, fCode 3, type h, adr 19, len 1, value 0004
- 2020.05.29 21:54:54 5: ModbusRS485: DropFrame - drop 0203020004fd87
- 2020.05.29 21:54:54 5: ModbusRS485: StartQueueTimer called from Read removes internal timer because it is not needed now
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h14, qlen 0 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 4: ModbusRS485: ProcessRequestQueue called from QueueRequest, qlen 1, next entry to id 2 (DHW300), last send to this device was 1.961 secs ago, last read 1.925 secs ago, last read on bus 1.928 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:56 5: ModbusRS485: CheckDelay commDelay (1s since 21:54:54.403) for DHW300, delay since 0.927 secs over
- 2020.05.29 21:54:56 5: ModbusRS485: CheckDelay sendDelay (1s since 21:54:54.367) for DHW300, delay since 0.964 secs over
- 2020.05.29 21:54:56 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 1, sending 0203000e0001e5fa read buffer empty, request: id 2, fCode 3, type h, adr 14, len 1, master device DHW300, reading WW_Solltemperatur_C (getUpdate), queued 0.01 secs ago
- 2020.05.29 21:54:56 5: SW: 0203000e0001e5fa
- 2020.05.29 21:54:56 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue removes internal timer because it is not needed now
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i10, qlen 0 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: StartQueueTimer called from QueueRequest sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i23, qlen 1 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i15, qlen 2 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i12, qlen 3 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i17, qlen 4 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i11, qlen 5 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i20, qlen 6 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i13, qlen 7 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i8, qlen 8 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i19, qlen 9 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i22, qlen 10 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i21, qlen 11 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i18, qlen 12 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h16, qlen 13 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h15, qlen 14 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h17, qlen 15 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i14, qlen 16 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i9, qlen 17 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h18, qlen 18 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i16, qlen 19 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h20, qlen 20 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with i24, qlen 21 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: QueueRequest called from DoRequest with h19, qlen 22 from master DHW300 through io device ModbusRS485
- 2020.05.29 21:54:56 5: ModbusRS485: read buffer: 0203020037bd92
- 2020.05.29 21:54:56 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 3 and data 020037
- 2020.05.29 21:54:56 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:54:56 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:54:56 5: ModbusRS485: CheckChecksum (called from HandleResponse): bd92 is valid
- 2020.05.29 21:54:56 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:54:56 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:54:56 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0203020037bd92, id 2, fCode 3, request: id 2, fCode 3, type h, adr 14, len 1, master device DHW300, reading WW_Solltemperatur_C (getUpdate), queued 0.11 secs ago, sent 0.11 secs ago, response: id 2, fCode 3, type h, adr 14, len 1, value 0037
- 2020.05.29 21:54:56 5: ModbusRS485: DropFrame - drop 0203020037bd92
- 2020.05.29 21:54:56 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:54:56 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 23, next entry to id 2 (DHW300), last send to this device was 0.110 secs ago, last read 0.015 secs ago, last read on bus 0.019 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:56 4: ModbusRS485: CheckDelay commDelay (1s since 21:54:56.430) for DHW300, rest 0.982, set timer to try again later
- 2020.05.29 21:54:56 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.982 seconds
- 2020.05.29 21:54:57 5: DHW300RELAY_192.168.1.35_33296: read gap is twice frameGap -> expecting a new request now
- 2020.05.29 21:54:57 5: DHW300RELAY_192.168.1.35_33296: read buffer: 0062000000060304000a0001
- 2020.05.29 21:54:57 4: DHW300RELAY_192.168.1.35_33296: ParseFrameStart (TCP) extracted id 3, fCode 4, tid 98, dlen 6 and data 000a0001
- 2020.05.29 21:54:57 5: DHW300RELAY_192.168.1.35_33296: HandleRequest called from Read
- 2020.05.29 21:54:57 5: DHW300RELAY_192.168.1.35_33296: ParseRequest called from HandleRequest
- 2020.05.29 21:54:57 4: DHW300RELAY_192.168.1.35_33296: HandleRequest Current frame / read buffer: 0062000000060304000a0001, id 3, fCode 4, tid 98
- 2020.05.29 21:54:57 5: DHW300RELAY_192.168.1.35_33296: RelayRequest called from HandleRequest
- 2020.05.29 21:54:57 5: DHW300RELAY: GetRelayIO found ModbusRS485 as Modbus relay forward io device for DHW300 with id 2
- 2020.05.29 21:54:57 4: DHW300RELAY_192.168.1.35_33296: RelayRequest via ModbusRS485, Proto RTU with id 2 Current frame / read buffer: 0062000000060304000a0001, id 3, fCode 4, tid 98, request: id 3, fCode 4, tid 98, type i, adr 10, len 1, for relay device DHW300RELAY
- 2020.05.29 21:54:57 5: ModbusRS485: QueueRequest called from RelayRequest with i10, qlen 23 from master DHW300 for relay DHW300RELAY through io device ModbusRS485
- 2020.05.29 21:54:57 4: ModbusRS485: ProcessRequestQueue called from QueueRequest, force, qlen 24, next entry to id 2 (DHW300), last send to this device was 1.025 secs ago, last read 0.930 secs ago, last read on bus 0.933 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:57 4: ModbusRS485: CheckDelay commDelay (1s since 21:54:56.430) for DHW300, rest 0.067, sleep forced
- 2020.05.29 21:54:57 5: ModbusRS485: CheckDelay sendDelay (1s since 21:54:56.336) for DHW300, delay since 0.029 secs over
- 2020.05.29 21:54:57 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 24, sending 0204000a000111fb read buffer empty, request: id 2, fCode 4, tid 98, type i, adr 10, len 1, master device DHW300, for relay device DHW300RELAY (relayed), queued 0.01 secs ago
- 2020.05.29 21:54:57 5: SW: 0204000a000111fb
- 2020.05.29 21:54:57 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:54:57 4: DHW300RELAY_192.168.1.35_33296: RequestDone Current frame / read buffer: 0062000000060304000a0001, id 3, fCode 4, tid 98, request: id 3, fCode 4, tid 98, type i, adr 10, len 1, for relay device DHW300RELAY
- 2020.05.29 21:54:57 5: DHW300RELAY_192.168.1.35_33296: DropFrame - drop 0062000000060304000a0001
- 2020.05.29 21:54:57 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:54:57 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:54:57 5: ModbusRS485: read buffer: 0204020017bd3e
- 2020.05.29 21:54:57 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020017
- 2020.05.29 21:54:57 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:54:57 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:54:57 5: ModbusRS485: CheckChecksum (called from HandleResponse): bd3e is valid
- 2020.05.29 21:54:57 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:54:57 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:54:57 5: ModbusRS485: HandleResponse calls parseObj with relay device DHW300RELAY for parsing data
- 2020.05.29 21:54:57 5: DHW300RELAY: ParseObj called with data 0017, type i, adr 10, valuesLen 1
- 2020.05.29 21:54:57 5: DHW300RELAY: ParseObj has no information about parsing i10
- 2020.05.29 21:54:57 5: ModbusRS485: HandleResponse got 0 readings from ParseObj for DHW300RELAY
- 2020.05.29 21:54:57 4: ModbusRS485: relaying response back failed because original request is missing
- 2020.05.29 21:54:57 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020017bd3e, id 2, fCode 4, request: id 2, fCode 4, tid 98, type i, adr 10, len 1, master device DHW300, for relay device DHW300RELAY (relayed), queued 0.07 secs ago, sent 0.07 secs ago, response: id 2, fCode 4, type i, adr 10, len 1, value 0017
- 2020.05.29 21:54:57 5: ModbusRS485: DropFrame - drop 0204020017bd3e
- 2020.05.29 21:54:57 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:54:57 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 23, next entry to id 2 (DHW300), last send to this device was 0.066 secs ago, last read 0.030 secs ago, last read on bus 0.034 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:57 4: ModbusRS485: CheckDelay commDelay (1s since 21:54:57.406) for DHW300, rest 0.968, set timer to try again later
- 2020.05.29 21:54:57 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.968 seconds
- 2020.05.29 21:54:58 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 23, next entry to id 2 (DHW300), last send to this device was 1.040 secs ago, last read 1.004 secs ago, last read on bus 1.008 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:58 5: ModbusRS485: CheckDelay commDelay (1s since 21:54:57.406) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:54:58 5: ModbusRS485: CheckDelay sendDelay (1s since 21:54:57.370) for DHW300, delay since 0.044 secs over
- 2020.05.29 21:54:58 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 23, sending 0204000a000111fb read buffer empty, request: id 2, fCode 4, type i, adr 10, len 1, master device DHW300, reading Lufteintritt_C (getUpdate), queued 2.07 secs ago
- 2020.05.29 21:54:58 5: SW: 0204000a000111fb
- 2020.05.29 21:54:58 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:54:58 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:54:58 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:54:58 5: ModbusRS485: read buffer: 0204020017bd3e
- 2020.05.29 21:54:58 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020017
- 2020.05.29 21:54:58 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:54:58 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:54:58 5: ModbusRS485: CheckChecksum (called from HandleResponse): bd3e is valid
- 2020.05.29 21:54:58 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:54:58 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:54:58 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020017bd3e, id 2, fCode 4, request: id 2, fCode 4, type i, adr 10, len 1, master device DHW300, reading Lufteintritt_C (getUpdate), queued 2.12 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 10, len 1, value 0017
- 2020.05.29 21:54:58 5: ModbusRS485: DropFrame - drop 0204020017bd3e
- 2020.05.29 21:54:58 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:54:58 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 22, next entry to id 2 (DHW300), last send to this device was 0.052 secs ago, last read 0.017 secs ago, last read on bus 0.020 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:58 4: ModbusRS485: CheckDelay commDelay (1s since 21:54:58.454) for DHW300, rest 0.981, set timer to try again later
- 2020.05.29 21:54:58 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.981 seconds
- 2020.05.29 21:54:59 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 22, next entry to id 2 (DHW300), last send to this device was 1.038 secs ago, last read 1.003 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:59 5: ModbusRS485: CheckDelay commDelay (1s since 21:54:58.454) for DHW300, delay since 0.010 secs over
- 2020.05.29 21:54:59 5: ModbusRS485: CheckDelay sendDelay (1s since 21:54:58.419) for DHW300, delay since 0.046 secs over
- 2020.05.29 21:54:59 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 22, sending 02040017000181fd read buffer empty, request: id 2, fCode 4, type i, adr 23, len 1, master device DHW300, reading Laufzeit_Verdichter_h (getUpdate), queued 3.12 secs ago
- 2020.05.29 21:54:59 5: SW: 02040017000181fd
- 2020.05.29 21:54:59 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:54:59 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:54:59 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:54:59 5: ModbusRS485: read buffer: 02040200fbbcb3
- 2020.05.29 21:54:59 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 0200fb
- 2020.05.29 21:54:59 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:54:59 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:54:59 5: ModbusRS485: CheckChecksum (called from HandleResponse): bcb3 is valid
- 2020.05.29 21:54:59 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:54:59 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:54:59 4: ModbusRS485: ResponseDone, Current frame / read buffer: 02040200fbbcb3, id 2, fCode 4, request: id 2, fCode 4, type i, adr 23, len 1, master device DHW300, reading Laufzeit_Verdichter_h (getUpdate), queued 3.16 secs ago, sent 0.05 secs ago, response: id 2, fCode 4, type i, adr 23, len 1, value 00fb
- 2020.05.29 21:54:59 5: ModbusRS485: DropFrame - drop 02040200fbbcb3
- 2020.05.29 21:54:59 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:54:59 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 21, next entry to id 2 (DHW300), last send to this device was 0.045 secs ago, last read 0.015 secs ago, last read on bus 0.018 secs ago from id 2 (DHW300)
- 2020.05.29 21:54:59 4: ModbusRS485: CheckDelay commDelay (1s since 21:54:59.501) for DHW300, rest 0.983, set timer to try again later
- 2020.05.29 21:54:59 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.983 seconds
- 2020.05.29 21:55:00 5: DHW300RELAY_192.168.1.35_33296: read gap is twice frameGap -> expecting a new request now
- 2020.05.29 21:55:00 5: DHW300RELAY_192.168.1.35_33296: read buffer: 007d00000006030400120001
- 2020.05.29 21:55:00 4: DHW300RELAY_192.168.1.35_33296: ParseFrameStart (TCP) extracted id 3, fCode 4, tid 125, dlen 6 and data 00120001
- 2020.05.29 21:55:00 5: DHW300RELAY_192.168.1.35_33296: HandleRequest called from Read
- 2020.05.29 21:55:00 5: DHW300RELAY_192.168.1.35_33296: ParseRequest called from HandleRequest
- 2020.05.29 21:55:00 4: DHW300RELAY_192.168.1.35_33296: HandleRequest Current frame / read buffer: 007d00000006030400120001, id 3, fCode 4, tid 125
- 2020.05.29 21:55:00 5: DHW300RELAY_192.168.1.35_33296: RelayRequest called from HandleRequest
- 2020.05.29 21:55:00 5: DHW300RELAY: GetRelayIO found ModbusRS485 as Modbus relay forward io device for DHW300 with id 2
- 2020.05.29 21:55:00 4: DHW300RELAY_192.168.1.35_33296: RelayRequest via ModbusRS485, Proto RTU with id 2 Current frame / read buffer: 007d00000006030400120001, id 3, fCode 4, tid 125, request: id 3, fCode 4, tid 125, type i, adr 18, len 1, for relay device DHW300RELAY
- 2020.05.29 21:55:00 5: ModbusRS485: QueueRequest called from RelayRequest with i18, qlen 21 from master DHW300 for relay DHW300RELAY through io device ModbusRS485
- 2020.05.29 21:55:00 4: ModbusRS485: ProcessRequestQueue called from QueueRequest, force, qlen 22, next entry to id 2 (DHW300), last send to this device was 0.891 secs ago, last read 0.860 secs ago, last read on bus 0.864 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:00 4: ModbusRS485: CheckDelay commDelay (1s since 21:54:59.501) for DHW300, rest 0.137, sleep forced
- 2020.05.29 21:55:00 4: ModbusRS485: CheckDelay sendDelay (1s since 21:54:59.470) for DHW300, rest 0.105, sleep forced
- 2020.05.29 21:55:00 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 22, sending 02040012000191fc read buffer empty, request: id 2, fCode 4, tid 125, type i, adr 18, len 1, master device DHW300, for relay device DHW300RELAY (relayed), queued 0.01 secs ago
- 2020.05.29 21:55:00 5: SW: 02040012000191fc
- 2020.05.29 21:55:00 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:00 4: DHW300RELAY_192.168.1.35_33296: RequestDone Current frame / read buffer: 007d00000006030400120001, id 3, fCode 4, tid 125, request: id 3, fCode 4, tid 125, type i, adr 18, len 1, for relay device DHW300RELAY
- 2020.05.29 21:55:00 5: DHW300RELAY_192.168.1.35_33296: DropFrame - drop 007d00000006030400120001
- 2020.05.29 21:55:00 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:00 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:00 5: ModbusRS485: read buffer: 0204020000fd30
- 2020.05.29 21:55:00 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020000
- 2020.05.29 21:55:00 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:00 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:00 5: ModbusRS485: CheckChecksum (called from HandleResponse): fd30 is valid
- 2020.05.29 21:55:00 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:00 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:00 5: ModbusRS485: HandleResponse calls parseObj with relay device DHW300RELAY for parsing data
- 2020.05.29 21:55:00 5: DHW300RELAY: ParseObj called with data 0000, type i, adr 18, valuesLen 1
- 2020.05.29 21:55:00 5: DHW300RELAY: ParseObj has no information about parsing i18
- 2020.05.29 21:55:00 5: ModbusRS485: HandleResponse got 0 readings from ParseObj for DHW300RELAY
- 2020.05.29 21:55:00 4: ModbusRS485: relaying response back failed because original request is missing
- 2020.05.29 21:55:00 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020000fd30, id 2, fCode 4, request: id 2, fCode 4, tid 125, type i, adr 18, len 1, master device DHW300, for relay device DHW300RELAY (relayed), queued 0.06 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 18, len 1, value 0000
- 2020.05.29 21:55:00 5: ModbusRS485: DropFrame - drop 0204020000fd30
- 2020.05.29 21:55:00 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:00 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 21, next entry to id 2 (DHW300), last send to this device was 0.060 secs ago, last read 0.022 secs ago, last read on bus 0.026 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:00 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:00.408) for DHW300, rest 0.975, set timer to try again later
- 2020.05.29 21:55:00 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.975 seconds
- 2020.05.29 21:55:01 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 21, next entry to id 2 (DHW300), last send to this device was 1.041 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:01 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:00.408) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:01 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:00.371) for DHW300, delay since 0.050 secs over
- 2020.05.29 21:55:01 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 21, sending 0204000f000101fa read buffer empty, request: id 2, fCode 4, type i, adr 15, len 1, master device DHW300, reading Verdichter (getUpdate), queued 5.07 secs ago
- 2020.05.29 21:55:01 5: SW: 0204000f000101fa
- 2020.05.29 21:55:01 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:01 5: ModbusRS485: read buffer: 02
- 2020.05.29 21:55:01 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:01 5: ModbusRS485: read buffer: 0204020000fd30
- 2020.05.29 21:55:01 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020000
- 2020.05.29 21:55:01 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:01 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:01 5: ModbusRS485: CheckChecksum (called from HandleResponse): fd30 is valid
- 2020.05.29 21:55:01 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:01 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:01 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020000fd30, id 2, fCode 4, request: id 2, fCode 4, type i, adr 15, len 1, master device DHW300, reading Verdichter (getUpdate), queued 5.12 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 15, len 1, value 0000
- 2020.05.29 21:55:01 5: ModbusRS485: DropFrame - drop 0204020000fd30
- 2020.05.29 21:55:01 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:01 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 20, next entry to id 2 (DHW300), last send to this device was 0.060 secs ago, last read 0.031 secs ago, last read on bus 0.034 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:01 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:01.455) for DHW300, rest 0.967, set timer to try again later
- 2020.05.29 21:55:01 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.967 seconds
- 2020.05.29 21:55:02 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 20, next entry to id 2 (DHW300), last send to this device was 1.033 secs ago, last read 1.003 secs ago, last read on bus 1.006 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:02 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:01.455) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:02 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:01.426) for DHW300, delay since 0.037 secs over
- 2020.05.29 21:55:02 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 20, sending 0204000c0001f1fa read buffer empty, request: id 2, fCode 4, type i, adr 12, len 1, master device DHW300, reading Sollwert_aktuell_C (getUpdate), queued 6.11 secs ago
- 2020.05.29 21:55:02 5: SW: 0204000c0001f1fa
- 2020.05.29 21:55:02 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:02 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:02 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:02 5: ModbusRS485: read buffer: 020402000fbd34
- 2020.05.29 21:55:02 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 02000f
- 2020.05.29 21:55:02 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:02 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:02 5: ModbusRS485: CheckChecksum (called from HandleResponse): bd34 is valid
- 2020.05.29 21:55:02 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:02 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:02 4: ModbusRS485: ResponseDone, Current frame / read buffer: 020402000fbd34, id 2, fCode 4, request: id 2, fCode 4, type i, adr 12, len 1, master device DHW300, reading Sollwert_aktuell_C (getUpdate), queued 6.16 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 12, len 1, value 000f
- 2020.05.29 21:55:02 5: ModbusRS485: DropFrame - drop 020402000fbd34
- 2020.05.29 21:55:02 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:02 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 19, next entry to id 2 (DHW300), last send to this device was 0.054 secs ago, last read 0.017 secs ago, last read on bus 0.021 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:02 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:02.504) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:02 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:03 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 19, next entry to id 2 (DHW300), last send to this device was 1.040 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:03 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:02.504) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:03 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:02.468) for DHW300, delay since 0.044 secs over
- 2020.05.29 21:55:03 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 19, sending 02040011000161fc read buffer empty, request: id 2, fCode 4, type i, adr 17, len 1, master device DHW300, reading Solar-/Ladepumpe (getUpdate), queued 7.16 secs ago
- 2020.05.29 21:55:03 5: SW: 02040011000161fc
- 2020.05.29 21:55:03 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:03 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:03 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:03 5: ModbusRS485: read buffer: 0204020000fd30
- 2020.05.29 21:55:03 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020000
- 2020.05.29 21:55:03 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:03 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:03 5: ModbusRS485: CheckChecksum (called from HandleResponse): fd30 is valid
- 2020.05.29 21:55:03 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:03 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:03 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020000fd30, id 2, fCode 4, request: id 2, fCode 4, type i, adr 17, len 1, master device DHW300, reading Solar-/Ladepumpe (getUpdate), queued 7.21 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 17, len 1, value 0000
- 2020.05.29 21:55:03 5: ModbusRS485: DropFrame - drop 0204020000fd30
- 2020.05.29 21:55:03 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:03 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 18, next entry to id 2 (DHW300), last send to this device was 0.053 secs ago, last read 0.018 secs ago, last read on bus 0.021 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:03 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:03.552) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:03 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:04 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 18, next entry to id 2 (DHW300), last send to this device was 1.039 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:04 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:03.552) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:04 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:03.517) for DHW300, delay since 0.042 secs over
- 2020.05.29 21:55:04 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 18, sending 0204000b0001403b read buffer empty, request: id 2, fCode 4, type i, adr 11, len 1, master device DHW300, reading Kollektrortemperatur_C (getUpdate), queued 8.20 secs ago
- 2020.05.29 21:55:04 5: SW: 0204000b0001403b
- 2020.05.29 21:55:04 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:05 5: ModbusRS485: ProcessRequestQueue called from Fhem internal timer returns, Fhem is still waiting for response, read buffer empty, request: id 2, fCode 4, type i, adr 11, len 1, master device DHW300, reading Kollektrortemperatur_C (getUpdate), queued 9.21 secs ago, sent 1.01 secs ago, qlen 17, try again in 1 seconds
- 2020.05.29 21:55:05 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:06 5: ModbusRS485: ProcessRequestQueue called from Fhem internal timer returns, Fhem is still waiting for response, read buffer empty, request: id 2, fCode 4, type i, adr 11, len 1, master device DHW300, reading Kollektrortemperatur_C (getUpdate), queued 10.63 secs ago, sent 2.43 secs ago, qlen 17, try again in 1 seconds
- 2020.05.29 21:55:06 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:07 3: ModbusRS485: ResponseTimeout called, master was DHW300
- 2020.05.29 21:55:07 3: ModbusRS485: Timeout waiting for a modbus response, read buffer empty, request: id 2, fCode 4, type i, adr 11, len 1, master device DHW300, reading Kollektrortemperatur_C (getUpdate), queued 11.59 secs ago, sent 3.39 secs ago
- 2020.05.29 21:55:07 5: ModbusRS485: DropFrame - drop
- 2020.05.29 21:55:07 5: ModbusRS485: StartQueueTimer called from ResponseTimeout sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:07 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 17, next entry to id 2 (DHW300), last send to this device was 3.391 secs ago, last read 4.404 secs ago, last read on bus 4.408 secs ago from id 2 (ModbusRS485)
- 2020.05.29 21:55:07 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:03.552) for DHW300, delay since 3.407 secs over
- 2020.05.29 21:55:07 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:04.565) for DHW300, delay since 2.395 secs over
- 2020.05.29 21:55:07 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 17, sending 02040014000171fd read buffer empty, request: id 2, fCode 4, type i, adr 20, len 1, master device DHW300, reading Meldungen (getUpdate), queued 11.60 secs ago
- 2020.05.29 21:55:07 5: SW: 02040014000171fd
- 2020.05.29 21:55:07 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:07 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:07 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:07 5: ModbusRS485: read buffer: 0204020007bcf2
- 2020.05.29 21:55:07 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020007
- 2020.05.29 21:55:07 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:07 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:07 5: ModbusRS485: CheckChecksum (called from HandleResponse): bcf2 is valid
- 2020.05.29 21:55:08 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:08 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:08 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020007bcf2, id 2, fCode 4, request: id 2, fCode 4, type i, adr 20, len 1, master device DHW300, reading Meldungen (getUpdate), queued 11.64 secs ago, sent 0.05 secs ago, response: id 2, fCode 4, type i, adr 20, len 1, value 0007
- 2020.05.29 21:55:08 5: ModbusRS485: DropFrame - drop 0204020007bcf2
- 2020.05.29 21:55:08 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:08 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 16, next entry to id 2 (DHW300), last send to this device was 0.049 secs ago, last read 0.018 secs ago, last read on bus 0.021 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:08 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:07.997) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:08 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:09 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 16, next entry to id 2 (DHW300), last send to this device was 1.034 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:09 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:07.997) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:09 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:07.966) for DHW300, delay since 0.038 secs over
- 2020.05.29 21:55:09 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 16, sending 0204000d0001a03a read buffer empty, request: id 2, fCode 4, type i, adr 13, len 1, master device DHW300, reading Abtaufuehler_C (getUpdate), queued 12.64 secs ago
- 2020.05.29 21:55:09 5: SW: 0204000d0001a03a
- 2020.05.29 21:55:09 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:09 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:09 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:09 5: ModbusRS485: read buffer: 02040200193cfa
- 2020.05.29 21:55:09 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020019
- 2020.05.29 21:55:09 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:09 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:09 5: ModbusRS485: CheckChecksum (called from HandleResponse): 3cfa is valid
- 2020.05.29 21:55:09 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:09 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:09 4: ModbusRS485: ResponseDone, Current frame / read buffer: 02040200193cfa, id 2, fCode 4, request: id 2, fCode 4, type i, adr 13, len 1, master device DHW300, reading Abtaufuehler_C (getUpdate), queued 12.69 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 13, len 1, value 0019
- 2020.05.29 21:55:09 5: ModbusRS485: DropFrame - drop 02040200193cfa
- 2020.05.29 21:55:09 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:09 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 15, next entry to id 2 (DHW300), last send to this device was 0.052 secs ago, last read 0.017 secs ago, last read on bus 0.020 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:09 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:09.045) for DHW300, rest 0.981, set timer to try again later
- 2020.05.29 21:55:09 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.981 seconds
- 2020.05.29 21:55:10 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 15, next entry to id 2 (DHW300), last send to this device was 1.039 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:10 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:09.045) for DHW300, delay since 0.011 secs over
- 2020.05.29 21:55:10 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:09.009) for DHW300, delay since 0.047 secs over
- 2020.05.29 21:55:10 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 15, sending 020400080001b03b read buffer empty, request: id 2, fCode 4, type i, adr 8, len 1, master device DHW300, reading Speichertemperatur_oben_C (getUpdate), queued 13.68 secs ago
- 2020.05.29 21:55:10 5: SW: 020400080001b03b
- 2020.05.29 21:55:10 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:10 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:10 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:10 5: ModbusRS485: read buffer: 02040200353d27
- 2020.05.29 21:55:10 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020035
- 2020.05.29 21:55:10 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:10 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:10 5: ModbusRS485: CheckChecksum (called from HandleResponse): 3d27 is valid
- 2020.05.29 21:55:10 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:10 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:10 4: ModbusRS485: ResponseDone, Current frame / read buffer: 02040200353d27, id 2, fCode 4, request: id 2, fCode 4, type i, adr 8, len 1, master device DHW300, reading Speichertemperatur_oben_C (getUpdate), queued 13.73 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 8, len 1, value 0035
- 2020.05.29 21:55:10 5: ModbusRS485: DropFrame - drop 02040200353d27
- 2020.05.29 21:55:10 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:10 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 14, next entry to id 2 (DHW300), last send to this device was 0.047 secs ago, last read 0.017 secs ago, last read on bus 0.020 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:10 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:10.093) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:10 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:11 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 14, next entry to id 2 (DHW300), last send to this device was 1.034 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:11 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:10.093) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:11 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:10.062) for DHW300, delay since 0.038 secs over
- 2020.05.29 21:55:11 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 14, sending 020400130001c03c read buffer empty, request: id 2, fCode 4, type i, adr 19, len 1, master device DHW300, reading Betriebsart (getUpdate), queued 14.72 secs ago
- 2020.05.29 21:55:11 5: SW: 020400130001c03c
- 2020.05.29 21:55:11 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:11 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:11 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:11 5: ModbusRS485: read buffer: 0204020008fcf6
- 2020.05.29 21:55:11 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020008
- 2020.05.29 21:55:11 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:11 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:11 5: ModbusRS485: CheckChecksum (called from HandleResponse): fcf6 is valid
- 2020.05.29 21:55:11 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:11 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:11 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020008fcf6, id 2, fCode 4, request: id 2, fCode 4, type i, adr 19, len 1, master device DHW300, reading Betriebsart (getUpdate), queued 14.78 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 19, len 1, value 0008
- 2020.05.29 21:55:11 5: ModbusRS485: DropFrame - drop 0204020008fcf6
- 2020.05.29 21:55:11 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:11 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 13, next entry to id 2 (DHW300), last send to this device was 0.053 secs ago, last read 0.018 secs ago, last read on bus 0.022 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:11 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:11.141) for DHW300, rest 0.979, set timer to try again later
- 2020.05.29 21:55:11 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.979 seconds
- 2020.05.29 21:55:12 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 13, next entry to id 2 (DHW300), last send to this device was 1.039 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:12 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:11.141) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:12 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:11.106) for DHW300, delay since 0.043 secs over
- 2020.05.29 21:55:12 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 13, sending 020400160001d03d read buffer empty, request: id 2, fCode 4, type i, adr 22, len 1, master device DHW300, reading Laufzeit_Ventilator_h (getUpdate), queued 15.77 secs ago
- 2020.05.29 21:55:12 5: SW: 020400160001d03d
- 2020.05.29 21:55:12 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:12 5: ModbusRS485: read buffer: 02
- 2020.05.29 21:55:12 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:12 5: ModbusRS485: read buffer: 020402010cfca5
- 2020.05.29 21:55:12 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 02010c
- 2020.05.29 21:55:12 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:12 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:12 5: ModbusRS485: CheckChecksum (called from HandleResponse): fca5 is valid
- 2020.05.29 21:55:12 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:12 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:12 4: ModbusRS485: ResponseDone, Current frame / read buffer: 020402010cfca5, id 2, fCode 4, request: id 2, fCode 4, type i, adr 22, len 1, master device DHW300, reading Laufzeit_Ventilator_h (getUpdate), queued 15.82 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 22, len 1, value 010c
- 2020.05.29 21:55:12 5: ModbusRS485: DropFrame - drop 020402010cfca5
- 2020.05.29 21:55:12 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:12 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 12, next entry to id 2 (DHW300), last send to this device was 0.066 secs ago, last read 0.027 secs ago, last read on bus 0.031 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:12 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:12.193) for DHW300, rest 0.970, set timer to try again later
- 2020.05.29 21:55:12 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.970 seconds
- 2020.05.29 21:55:13 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 12, next entry to id 2 (DHW300), last send to this device was 1.043 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:13 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:12.193) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:13 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:12.154) for DHW300, delay since 0.047 secs over
- 2020.05.29 21:55:13 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 12, sending 020400150001203d read buffer empty, request: id 2, fCode 4, type i, adr 21, len 1, master device DHW300, reading Laufzeit_Geraet_h (getUpdate), queued 16.82 secs ago
- 2020.05.29 21:55:13 5: SW: 020400150001203d
- 2020.05.29 21:55:13 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:13 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:13 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:13 5: ModbusRS485: read buffer: 02040207927ead
- 2020.05.29 21:55:13 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020792
- 2020.05.29 21:55:13 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:13 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:13 5: ModbusRS485: CheckChecksum (called from HandleResponse): 7ead is valid
- 2020.05.29 21:55:13 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:13 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:13 4: ModbusRS485: ResponseDone, Current frame / read buffer: 02040207927ead, id 2, fCode 4, request: id 2, fCode 4, type i, adr 21, len 1, master device DHW300, reading Laufzeit_Geraet_h (getUpdate), queued 16.86 secs ago, sent 0.05 secs ago, response: id 2, fCode 4, type i, adr 21, len 1, value 0792
- 2020.05.29 21:55:13 5: ModbusRS485: DropFrame - drop 02040207927ead
- 2020.05.29 21:55:13 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:13 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 11, next entry to id 2 (DHW300), last send to this device was 0.048 secs ago, last read 0.017 secs ago, last read on bus 0.021 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:13 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:13.237) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:13 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:14 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 11, next entry to id 2 (DHW300), last send to this device was 1.034 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:14 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:13.237) for DHW300, delay since 0.007 secs over
- 2020.05.29 21:55:14 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:13.206) for DHW300, delay since 0.038 secs over
- 2020.05.29 21:55:14 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 11, sending 02040012000191fc read buffer empty, request: id 2, fCode 4, type i, adr 18, len 1, master device DHW300, reading Leistung_W (getUpdate), queued 17.86 secs ago
- 2020.05.29 21:55:14 5: SW: 02040012000191fc
- 2020.05.29 21:55:14 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:14 5: ModbusRS485: read buffer: 0204
- 2020.05.29 21:55:14 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:14 5: ModbusRS485: read buffer: 0204020000fd30
- 2020.05.29 21:55:14 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 4 and data 020000
- 2020.05.29 21:55:14 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:14 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:14 5: ModbusRS485: CheckChecksum (called from HandleResponse): fd30 is valid
- 2020.05.29 21:55:14 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:14 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:14 4: ModbusRS485: ResponseDone, Current frame / read buffer: 0204020000fd30, id 2, fCode 4, request: id 2, fCode 4, type i, adr 18, len 1, master device DHW300, reading Leistung_W (getUpdate), queued 17.91 secs ago, sent 0.06 secs ago, response: id 2, fCode 4, type i, adr 18, len 1, value 0000
- 2020.05.29 21:55:14 5: ModbusRS485: DropFrame - drop 0204020000fd30
- 2020.05.29 21:55:14 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:14 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 10, next entry to id 2 (DHW300), last send to this device was 0.051 secs ago, last read 0.017 secs ago, last read on bus 0.021 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:14 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:14.285) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:14 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:15 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 10, next entry to id 2 (DHW300), last send to this device was 1.038 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:15 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:14.285) for DHW300, delay since 0.014 secs over
- 2020.05.29 21:55:15 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:14.250) for DHW300, delay since 0.049 secs over
- 2020.05.29 21:55:15 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 10, sending 02030010000185fc read buffer empty, request: id 2, fCode 3, type h, adr 16, len 1, master device DHW300, reading WW_Hysterese_K (getUpdate), queued 18.91 secs ago
- 2020.05.29 21:55:15 5: SW: 02030010000185fc
- 2020.05.29 21:55:15 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:15 5: ModbusRS485: read buffer: 0203
- 2020.05.29 21:55:15 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:15 5: ModbusRS485: read buffer: 02030200053c47
- 2020.05.29 21:55:15 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 3 and data 020005
- 2020.05.29 21:55:15 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:15 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:15 5: ModbusRS485: CheckChecksum (called from HandleResponse): 3c47 is valid
- 2020.05.29 21:55:15 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:15 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:15 4: ModbusRS485: ResponseDone, Current frame / read buffer: 02030200053c47, id 2, fCode 3, request: id 2, fCode 3, type h, adr 16, len 1, master device DHW300, reading WW_Hysterese_K (getUpdate), queued 18.96 secs ago, sent 0.07 secs ago, response: id 2, fCode 3, type h, adr 16, len 1, value 0005
- 2020.05.29 21:55:15 5: ModbusRS485: DropFrame - drop 02030200053c47
- 2020.05.29 21:55:15 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:15 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 9, next entry to id 2 (DHW300), last send to this device was 0.054 secs ago, last read 0.017 secs ago, last read on bus 0.021 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:15 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:15.343) for DHW300, rest 0.980, set timer to try again later
- 2020.05.29 21:55:15 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.980 seconds
- 2020.05.29 21:55:16 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 9, next entry to id 2 (DHW300), last send to this device was 1.041 secs ago, last read 1.004 secs ago, last read on bus 1.007 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:16 5: ModbusRS485: CheckDelay commDelay (1s since 21:55:15.343) for DHW300, delay since 0.006 secs over
- 2020.05.29 21:55:16 5: ModbusRS485: CheckDelay sendDelay (1s since 21:55:15.306) for DHW300, delay since 0.045 secs over
- 2020.05.29 21:55:16 4: ModbusRS485: ProcessRequestQueue (V4.1.8 - 12.11.2019) qlen 9, sending 0203000f0001b43a read buffer empty, request: id 2, fCode 3, type h, adr 15, len 1, master device DHW300, reading WW_Absenktemperatur_C (getUpdate), queued 19.96 secs ago
- 2020.05.29 21:55:16 5: SW: 0203000f0001b43a
- 2020.05.29 21:55:16 5: ModbusRS485: StartQueueTimer called from ProcessRequestQueue sets internal timer to call Modbus_ProcessRequestQueue in 1.000 seconds
- 2020.05.29 21:55:16 5: ModbusRS485: read buffer: 0203
- 2020.05.29 21:55:16 5: ModbusRS485: read did not see a valid frame start yet, wait for more data
- 2020.05.29 21:55:16 5: ModbusRS485: read buffer: 020302000fbc40
- 2020.05.29 21:55:16 4: ModbusRS485: ParseFrameStart (RTU) extracted id 2, fCode 3 and data 02000f
- 2020.05.29 21:55:16 5: ModbusRS485: HandleResponse called from Read
- 2020.05.29 21:55:16 5: ModbusRS485: ParseResponse called from HandleResponse
- 2020.05.29 21:55:16 5: ModbusRS485: CheckChecksum (called from HandleResponse): bc40 is valid
- 2020.05.29 21:55:16 5: ModbusRS485: HandleResponse calls parseObj with master device DHW300 for parsing data
- 2020.05.29 21:55:16 5: ModbusRS485: HandleResponse got 1 readings from ParseObj for DHW300
- 2020.05.29 21:55:16 4: ModbusRS485: ResponseDone, Current frame / read buffer: 020302000fbc40, id 2, fCode 3, request: id 2, fCode 3, type h, adr 15, len 1, master device DHW300, reading WW_Absenktemperatur_C (getUpdate), queued 20.01 secs ago, sent 0.06 secs ago, response: id 2, fCode 3, type h, adr 15, len 1, value 000f
- 2020.05.29 21:55:16 5: ModbusRS485: DropFrame - drop 020302000fbc40
- 2020.05.29 21:55:16 5: ModbusRS485: StartQueueTimer called from Read sets internal timer to call Modbus_ProcessRequestQueue in 0.000 seconds
- 2020.05.29 21:55:16 4: ModbusRS485: ProcessRequestQueue called from Fhem internal timer, qlen 5, next entry to id 2 (DHW300), last send to this device was 0.052 secs ago, last read 0.017 secs ago, last read on bus 0.020 secs ago from id 2 (DHW300)
- 2020.05.29 21:55:16 4: ModbusRS485: CheckDelay commDelay (1s since 21:55:16.391) for DHW300, rest 0.981, set timer to try again later
- 2020.05.29 21:55:16 5: ModbusRS485: StartQueueTimer called from CheckDelay sets internal timer to call Modbus_ProcessRequestQueue in 0.981 seconds
- 2020.05.29 21:55:17 5: ModbusRS485: ProcessRequestQueue called from Fhem internal timer as queue:ModbusRS485 has nothing
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement