API tools faq
paste
Guest User

Untitled

a guest
Jun 17th, 2019
402
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.32 KB | None | 0 0
raw download clone embed print report
  1. üTIM-1.0
  2. WTMI-devel-18.07.0-6050fd5
  3. WTMI: system early-init
  4. CPU VDD voltage default value: 1.155V
  5. NOTICE: Booting Trusted Firmware
  6. NOTICE: BL1: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
  7. NOTICE: BL1: Built : 15:11:39, Sep 7 2018
  8. NOTICE: BL1: Booting BL2
  9. NOTICE: BL2: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
  10. NOTICE: BL2: Built : 15:11:42, Sep 7 2018
  11. NOTICE: BL1: Booting BL31
  12. NOTICE: BL31: v1.5(release):711ecd3 (Marvell-armada-18.09.4)
  13. NOTICE: BL31: Built : 15:1
  14.  
  15. U-Boot 2017.03-armada-18.09.1-ga92bd86-armbian (Sep 05 2018 - 21:49:34 +0200)
  16.  
  17. Model: Marvell Armada 3720 Community Board ESPRESSOBin
  18. CPU 1000 [MHz]
  19. L2 1000 [MHz]
  20. NB AXI 250 [MHz]
  21. SB AXI 250 [MHz]
  22. DDR 800 [MHz]
  23. DRAM: 1 GiB
  24. U-Boot DT blob at : 000000003f7142d8
  25. Comphy chip #0:
  26. Comphy-0: USB3 5 Gbps
  27. Comphy-1: PEX0 2.5 Gbps
  28. Comphy-2: SATA0 6 Gbps
  29. Target spinup took 0 ms.
  30. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
  31. flags: ncq led only pmp fbss pio slum part sxs
  32. PCIE-0: Link down
  33. MMC: sdhci@d0000: 0
  34. SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
  35. Net: eth0: neta@30000 [PRIME]
  36. Hit any key to stop autoboot: 0
  37. switch to partitions #0, OK
  38. mmc0 is current device
  39. 18352640 bytes read in 814 ms (21.5 MiB/s)
  40. 10826 bytes read in 9 ms (1.1 MiB/s)
  41. ## Flattened Device Tree blob at 06000000
  42. Booting using the fdt blob at 0x6000000
  43. Using Device Tree in place at 0000000006000000, end 0000000006005a49
  44.  
  45. Starting kernel ...
  46.  
  47. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  48. [ 0.000000] Linux version 5.2.0-rc5 ([email protected]) (gcc version 9.1.1 20190503 (Red Hat 9.1.1-1) (GCC)) #2 SMP Mon Jun 17 11:01:09
  49. [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
  50. [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
  51. [ 0.000000] printk: bootconsole [ar3700_uart0] enabled
  52. [ 0.000000] efi: Getting EFI parameters from FDT:
  53. [ 0.000000] efi: UEFI not found.
  54. [ 0.000000] cma: Reserved 128 MiB at 0x0000000038000000
  55. [ 0.000000] psci: probing for conduit method from DT.
  56. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  57. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  58. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  59. [ 0.000000] psci: SMC Calling Convention v1.1
  60. [ 0.000000] percpu: Embedded 29 pages/cpu s86104 r0 d32680 u118784
  61. [ 0.000000] Detected VIPT I-cache on CPU0
  62. [ 0.000000] CPU features: detected: ARM erratum 845719
  63. [ 0.000000] CPU features: detected: GIC system register CPU interface
  64. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  65. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 257536
  66. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/sda2 rw rootwait net.ifnames=0 bios0
  67. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  68. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  69. [ 0.000000] Memory: 876212K/1046528K available (9852K kernel code, 1218K rwdata, 3144K rodata, 3648K init, 925K bss, 39244K reserved)
  70. [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x3d8 with crng_init=0
  71. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  72. [ 0.000000] ftrace: allocating 34340 entries in 135 pages
  73. [ 0.000000] rcu: Hierarchical RCU implementation.
  74. [ 0.000000] rcu: RCU event tracing is enabled.
  75. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
  76. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  77. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  78. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  79. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  80. [ 0.000000] GICv3: Distributor has no Range Selector support
  81. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  82. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
  83. [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
  84. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  85. [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  86. [ 0.008435] Console: colour dummy device 80x25
  87. [ 0.012970] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
  88. [ 0.023504] pid_max: default: 32768 minimum: 301
  89. [ 0.028517] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  90. [ 0.035349] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  91. [ 0.043145] *** VALIDATE proc ***
  92. [ 0.046592] *** VALIDATE cgroup1 ***
  93. [ 0.050203] *** VALIDATE cgroup2 ***
  94. [ 0.054551] ASID allocator initialised with 32768 entries
  95. [ 0.060130] rcu: Hierarchical SRCU implementation.
  96. [ 0.066127] EFI services will not be available.
  97. [ 0.071112] smp: Bringing up secondary CPUs ...
  98. [ 0.076168] Detected VIPT I-cache on CPU1
  99. [ 0.076202] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
  100. [ 0.076239] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  101. [ 0.076351] smp: Brought up 1 node, 2 CPUs
  102. [ 0.098409] SMP: Total of 2 processors activated.
  103. [ 0.103250] CPU features: detected: 32-bit EL0 Support
  104. [ 0.108536] CPU features: detected: CRC32 instructions
  105. [ 0.114456] CPU: All CPU(s) started at EL2
  106. [ 0.118605] alternatives: patching kernel code
  107. [ 0.124620] devtmpfs: initialized
  108. [ 0.138705] DMA-API: preallocated 65536 debug entries
  109. [ 0.143848] DMA-API: debugging enabled by kernel config
  110. [ 0.149217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  111. [ 0.159258] futex hash table entries: 512 (order: 3, 32768 bytes)
  112. [ 0.169719] pinctrl core: initialized pinctrl subsystem
  113. [ 0.175508] DMI not present or invalid.
  114. [ 0.179663] NET: Registered protocol family 16
  115. [ 0.185144] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  116. [ 0.193226] DMA: preallocated 256 KiB pool for atomic allocations
  117. [ 0.199642] Serial: AMBA PL011 UART driver
  118. [ 0.214611] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  119. [ 0.221478] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  120. [ 0.228350] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  121. [ 0.235240] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  122. [ 2.033789] cryptd: max_cpu_qlen set to 1000
  123. [ 2.052032] alg: No test for lzo-rle (lzo-rle-generic)
  124. [ 2.057362] alg: No test for lzo-rle (lzo-rle-scomp)
  125. [ 2.063745] alg: No test for 842 (842-generic)
  126. [ 2.068325] alg: No test for 842 (842-scomp)
  127. [ 2.109881] DRBG: Continuing without Jitter RNG
  128. [ 2.130077] ACPI: Interpreter disabled.
  129. [ 2.134646] vgaarb: loaded
  130. [ 2.137627] SCSI subsystem initialized
  131. [ 2.141810] usbcore: registered new interface driver usbfs
  132. [ 2.147471] usbcore: registered new interface driver hub
  133. [ 2.152925] usbcore: registered new device driver usb
  134. [ 2.158312] pps_core: LinuxPPS API ver. 1 registered
  135. [ 2.163347] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  136. [ 2.173514] clocksource: Switched to clocksource arch_sys_counter
  137. [ 2.776321] FS-Cache: Loaded
  138. [ 2.779252] *** VALIDATE hugetlbfs ***
  139. [ 2.783258] pnp: PnP ACPI: disabled
  140. [ 2.792560] NET: Registered protocol family 2
  141. [ 2.797556] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
  142. [ 2.805397] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  143. [ 2.812692] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  144. [ 2.819468] TCP: Hash tables configured (established 8192 bind 8192)
  145. [ 2.826079] UDP hash table entries: 512 (order: 2, 16384 bytes)
  146. [ 2.832124] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  147. [ 2.838834] NET: Registered protocol family 1
  148. [ 2.843740] RPC: Registered named UNIX socket transport module.
  149. [ 2.849775] RPC: Registered udp transport module.
  150. [ 2.854600] RPC: Registered tcp transport module.
  151. [ 2.859440] RPC: Registered tcp NFSv4.1 backchannel transport module.
  152. [ 2.866084] PCI: CLS 0 bytes, default 64
  153. [ 2.870793] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  154. [ 2.878918] kvm [1]: IPA Size Limit: 40bits
  155. [ 2.883612] kvm [1]: vgic-v2@d1da0000
  156. [ 2.887316] kvm [1]: GIC system register CPU interface enabled
  157. [ 2.893352] kvm [1]: vgic interrupt IRQ1
  158. [ 2.897426] kvm [1]: Hyp mode initialized successfully
  159. [ 2.935746] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  160. [ 2.946190] zbud: loaded
  161. [ 2.950635] NFS: Registering the id_resolver key type
  162. [ 2.955849] Key type id_resolver registered
  163. [ 2.960077] Key type id_legacy registered
  164. [ 2.964208] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  165. [ 2.971098] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  166. [ 2.980443] Key type asymmetric registered
  167. [ 2.984603] Asymmetric key parser 'x509' registered
  168. [ 2.989654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  169. [ 3.001950] advk-pcie d0070000.pcie: host bridge /soc/pcie@d0070000 ranges:
  170. [ 3.009092] advk-pcie d0070000.pcie: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
  171. [ 3.016587] advk-pcie d0070000.pcie: IO 0xe9000000..0xe900ffff -> 0xe9000000
  172. [ 4.024238] advk-pcie d0070000.pcie: link never came up
  173. [ 4.029823] advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
  174. [ 4.036222] pci_bus 0000:00: root bus resource [bus 00-ff]
  175. [ 4.041849] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xe8ffffff]
  176. [ 4.048928] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0xe9000000-0xe900ffff])
  177. [ 4.058724] pci 0000:00:00.0: [1b4b:0100] type 01 class 0x060400
  178. [ 4.064895] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  179. [ 4.072739] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  180. [ 4.081499] advk-pcie d0070000.pcie: config read/write timed out
  181. [ 4.088337] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  182. [ 4.095104] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
  183. [ 4.102516] pci 0000:00:00.0: PCI bridge to [bus 01]
  184. [ 4.107954] pcieport 0000:00:00.0: PME: Signaling with IRQ 40
  185. [ 4.115940] mv_xor d0060900.xor: Marvell shared XOR driver
  186. [ 4.150310] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  187. [ 4.186304] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  188. [ 4.194507] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  189. [ 4.205014] cacheinfo: Unable to detect cache hierarchy for CPU 0
  190. [ 4.211629] phy phy-d0018300.phy.2: phy poweron failed --> -1
  191. [ 4.217574] ahci-mvebu: probe of d00e0000.sata failed with error -1
  192. [ 4.224294] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  193. [ 4.232246] MACsec IEEE 802.1AE
  194. [ 4.235866] libphy: Fixed MDIO Bus: probed
  195. [ 4.240293] tun: Universal TUN/TAP device driver, 1.6
  196. [ 4.245919] libphy: orion_mdio_bus: probed
  197. [ 4.250471] mv88e6085 d0032004.mdio-mii:01: switch 0x3410 detected: Marvell 88E6341, revision 0
  198. [ 4.272171] libphy: mdio: probed
  199. [ 4.295587] mvneta d0030000.ethernet eth0: Using random mac address e2:28:3c:73:37:3f
  200. [ 4.303917] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  201. [ 4.310616] ehci-pci: EHCI PCI platform driver
  202. [ 4.315167] ehci-orion: EHCI orion driver
  203. [ 4.319453] orion-ehci d005e000.usb: EHCI Host Controller
  204. [ 4.324970] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  205. [ 4.333285] orion-ehci d005e000.usb: irq 13, io mem 0xd005e000
  206. [ 4.353521] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  207. [ 4.359749] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
  208. [ 4.368201] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  209. [ 4.375628] usb usb1: Product: EHCI Host Controller
  210. [ 4.380643] usb usb1: Manufacturer: Linux 5.2.0-rc5 ehci_hcd
  211. [ 4.386467] usb usb1: SerialNumber: d005e000.usb
  212. [ 4.391696] hub 1-0:1.0: USB hub found
  213. [ 4.395506] hub 1-0:1.0: 1 port detected
  214. [ 4.400286] phy phy-d0018300.phy.0: phy poweron failed --> -1
  215. [ 4.406180] xhci-hcd: probe of d0058000.usb failed with error -1
  216. [ 4.412585] i2c /dev entries driver
  217. [ 4.416502] sdhci: Secure Digital Host Controller Interface driver
  218. [ 4.422790] sdhci: Copyright(c) Pierre Ossman
  219. [ 4.427269] sdhci-pltfm: SDHCI platform and OF driver helper
  220. [ 4.433400] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  221. [ 4.445966] alg: skcipher: safexcel-cbc-des encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
  222. [ 4.456851] 00000000: fe dc ba 98 76 54 32 10
  223. [ 4.463801] alg: skcipher: safexcel-cbc-des3_ede encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
  224. [ 4.475140] 00000000: 7d 33 88 93 0f 93 b2 42
  225. [ 4.482155] alg: skcipher: safexcel-cbc-aes encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
  226. [ 4.493044] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
  227. [ 4.500686] random: fast init done
  228. [ 4.534674] alg: hash: safexcel-hmac-sha224 test failed (wrong result) on test vector 3, cfg="init+update+update+final two even spli"
  229. [ 4.550177] alg: hash: safexcel-hmac-sha256 test failed (wrong result) on test vector 2, cfg="import/export"
  230. [ 4.570807] alg: aead: safexcel-authenc-hmac-sha1-cbc-aes encryption test failed (wrong result) on test vector 0, cfg="misaligned sp"
  231. [ 4.585852] alg: No test for authenc(hmac(sha224),cbc(aes)) (safexcel-authenc-hmac-sha224-cbc-aes)
  232. [ 4.595794] ------------[ cut here ]------------
  233. [ 4.600472] DMA-API: crypto-safexcel d0090000.crypto: device driver frees DMA sg list with different entry count [map count=1] [unma]
  234. [ 4.613665] WARNING: CPU: 0 PID: 233 at kernel/dma/debug.c:1049 check_unmap+0x5e8/0x8e8
  235. [ 4.621886] CPU: 0 PID: 233 Comm: irq/17-d0090000 Not tainted 5.2.0-rc5 #2
  236. [ 4.628958] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
  237. [ 4.635592] pstate: 60000085 (nZCv daIf -PAN -UAO)
  238. [ 4.640518] pc : check_unmap+0x5e8/0x8e8
  239. [ 4.644550] lr : check_unmap+0x5e8/0x8e8
  240. [ 4.648581] sp : ffff000011cd3b00
  241. [ 4.651985] x29: ffff000011cd3b00 x28: 0000000000000001
  242. [ 4.657451] x27: 0000000000000000 x26: ffff0000110fe000
  243. [ 4.662916] x25: ffff0000110fec98 x24: ffff000011224b40
  244. [ 4.668382] x23: ffff80003561ec00 x22: ffff0000110d8840
  245. [ 4.673848] x21: ffff000011cd3be8 x20: ffff000011216cc0
  246. [ 4.679313] x19: ffff800036672f80 x18: 0000000000000010
  247. [ 4.684779] x17: 0000000000000000 x16: 0000000000000000
  248. [ 4.690244] x15: ffff80003561f0d8 x14: 3d746e756f632070
  249. [ 4.695710] x13: 616d6e755b205d31 x12: 3d746e756f632070
  250. [ 4.701175] x11: 616d5b20746e756f x10: 63207972746e6520
  251. [ 4.706641] x9 : ffff000011210000 x8 : 00000000000000cd
  252. [ 4.712107] x7 : 000000000000000d x6 : ffff00001120ffc9
  253. [ 4.717572] x5 : 0000000000000003 x4 : 0000000000000000
  254. [ 4.723038] x3 : 0000000000000000 x2 : 00000000ffffffff
  255. [ 4.728503] x1 : d73bab3587ea0500 x0 : 0000000000000000
  256. [ 4.733970] Call trace:
  257. [ 4.736481] check_unmap+0x5e8/0x8e8
  258. [ 4.740155] debug_dma_unmap_sg+0x12c/0x188
  259. [ 4.744458] safexcel_handle_req_result.isra.0+0x11c/0x228
  260. [ 4.750099] safexcel_aead_handle_result+0x90/0xa8
  261. [ 4.755027] safexcel_irq_ring_thread+0xf0/0x2b0
  262. [ 4.759777] irq_thread_fn+0x30/0x80
  263. [ 4.763449] irq_thread+0x120/0x1f0
  264. [ 4.767035] kthread+0x104/0x130
  265. [ 4.770351] ret_from_fork+0x10/0x1c
  266. [ 4.774026] ---[ end trace e89652478731b003 ]---
  267. [ 4.778770] DMA-API: Mapped at:
  268. [ 4.781998] debug_dma_map_sg+0xbc/0x348
  269. [ 4.786029] safexcel_send_req+0x12c/0x960
  270. [ 4.790240] safexcel_aead_send+0xa8/0xc0
  271. [ 4.794362] safexcel_dequeue+0x84/0x2e0
  272. [ 4.798393] safexcel_dequeue_work+0x24/0x30
  273. [ 4.802931] alg: aead: safexcel-authenc-hmac-sha256-cbc-aes encryption test failed (wrong result) on test vector 0, cfg="two even al"
  274. [ 4.816535] alg: No test for authenc(hmac(sha384),cbc(aes)) (safexcel-authenc-hmac-sha384-cbc-aes)
  275. [ 4.826535] alg: aead: safexcel-authenc-hmac-sha512-cbc-aes encryption test failed (wrong result) on test vector 0, cfg="two even al"
  276. [ 4.840203] usbcore: registered new interface driver usbhid
  277. [ 4.845878] usbhid: USB HID core driver
  278. [ 4.850267] ipip: IPv4 and MPLS over IPv4 tunneling driver
  279. [ 4.856318] gre: GRE over IPv4 demultiplexor driver
  280. [ 4.861269] ip_gre: GRE over IPv4 tunneling driver
  281. [ 4.867134] IPv4 over IPsec tunneling driver
  282. [ 4.871798] Initializing XFRM netlink socket
  283. [ 4.876568] NET: Registered protocol family 10
  284. [ 4.882502] Segment Routing with IPv6
  285. [ 4.886308] NET: Registered protocol family 17
  286. [ 4.890841] NET: Registered protocol family 15
  287. [ 4.895664] 8021q: 802.1Q VLAN Support v1.8
  288. [ 4.899949] Key type dns_resolver registered
  289. [ 4.904947] registered taskstats version 1
  290. [ 4.911229] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0, base_baud = 1562500) is a mvebu-uart
  291. [ 4.920707] printk: console [ttyMV0] enabled
  292. [ 4.920707] printk: console [ttyMV0] enabled
  293. [ 4.929451] printk: bootconsole [ar3700_uart0] disabled
  294. [ 4.929451] printk: bootconsole [ar3700_uart0] disabled
  295. [ 4.941268] mv88e6085 d0032004.mdio-mii:01: switch 0x3410 detected: Marvell 88E6341, revision 0
  296. [ 4.960110] libphy: mdio: probed
  297. [ 5.636430] mv88e6085 d0032004.mdio-mii:01 wan (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:11] drive]
  298. [ 5.649746] mv88e6085 d0032004.mdio-mii:01 lan0 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:12] driv]
  299. [ 5.663775] mv88e6085 d0032004.mdio-mii:01 lan1 (uninitialized): PHY [!soc!internal-regs@d0000000!mdio@32004!switch0@1!mdio:13] driv]
  300. [ 5.676758] DSA: tree 0 setup
  301. [ 5.679357] xenon-sdhci d00d0000.sdhci: Got CD GPIO
  302. [ 5.715602] mmc0: SDHCI controller on d00d0000.sdhci [d00d0000.sdhci] using ADMA
  303. [ 5.720577] hctosys: unable [ 5.726193] Waiting for root device /dev/sda2...
  304. [ 5.786606] mmc0: new ultra high speed SDR104 SDHC card at address 0001
  305. [ 5.791260] mmcblk0: mmc0:0001 GB1QT 29.8 GiB
  306. [ 5.796260] mmcblk0: p1
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!