API tools faq
paste
Advertisement
GeorgeIoak

Untitled

GeorgeIoak
Jan 30th, 2013
85
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 42.96 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot SPL 2012.10-04266-g20efdee (Jan 14 2013 - 23:09:11)
  3. DRAM: 1024MB
  4. SUNXI SD/MMC: 0
  5.  
  6.  
  7. U-Boot 2012.10-04266-g20efdee (Jan 14 2013 - 23:09:11) Allwinner Technology
  8.  
  9. CPU: SUNXI Family
  10. Board: Cubieboard
  11. I2C: ready
  12. DRAM: 1 GiB
  13. MMC: SUNXI SD/MMC: 0
  14. *** Warning - bad CRC, using default environment
  15.  
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Hit any key to stop autoboot: 3  2  1  0
  20. reading uEnv.txt
  21.  
  22. 143 bytes read
  23. Loaded environment from uEnv.txt
  24. reading boot.scr
  25.  
  26. ** Unable to read "boot.scr" from mmc 0:1 **
  27. Loading file "boot.scr" from mmc device 0:1
  28. Failed to mount ext2 filesystem...
  29. ** Bad ext2 partition or disk - mmc 0:1 **
  30. ext2load - load binary file from a Ext2 filesystem
  31.  
  32. Usage:
  33. ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
  34. - load binary file 'filename' from 'dev' on 'interface'
  35. to address 'addr' from ext2 filesystem
  36. Loading file "boot/boot.scr" from mmc device 0:1
  37. Failed to mount ext2 filesystem...
  38. ** Bad ext2 partition or disk - mmc 0:1 **
  39. ext2load - load binary file from a Ext2 filesystem
  40.  
  41. Usage:
  42. ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
  43. - load binary file 'filename' from 'dev' on 'interface'
  44. to address 'addr' from ext2 filesystem
  45. reading script.bin
  46.  
  47. 43308 bytes read
  48. reading uImage
  49.  
  50. 3890132 bytes read
  51. ## Booting kernel from Legacy Image at 48000000 ...
  52. Image Name: Linux-3.0.57
  53. Image Type: ARM Linux Kernel Image (uncompressed)
  54. Data Size: 3890068 Bytes = 3.7 MiB
  55. Load Address: 40008000
  56. Entry Point: 40008000
  57. Verifying Checksum ... OK
  58. Loading Kernel Image ... OK
  59. OK
  60.  
  61. Starting kernel ...
  62.  
  63. <6>Initializing cgroup subsys cpuset
  64. <5>Linux version 3.0.57 (george@george-VirtualBox) (gcc version 4.7.3 20121205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2012.12-20121214 - Linaro
  65. GCC 2012.12) ) #3 PREEMPT Sun Jan 27 22:41:29 PST 2013
  66. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  67. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  68. Machine: sun4i
  69. <6>Memory cut off:
  70. <6> MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  71. <4>Ignoring unrecognised tag 0x00000000
  72. <6>Memory Reserved:
  73. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  74. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  75. <6> G2D : 0x58000000 - 0x58ffffff ( 16 MB)
  76. <6> LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  77. Memory policy: ECC disabled, Data cache writeback
  78. <6>BROM Ver: 1100 1100 1623
  79. <6>chip-id: A10 (AW1623 revision C)
  80. <7>On node 0 totalpages: 245760
  81. <7>free_area_init_node: node 0, pgdat c07535e8, node_mem_map c080e000
  82. <7> Normal zone: 1280 pages used for memmap
  83. <7> Normal zone: 0 pages reserved
  84. <7> Normal zone: 146176 pages, LIFO batch:31
  85. <7> HighMem zone: 768 pages used for memmap
  86. <7> HighMem zone: 97536 pages, LIFO batch:31
  87. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  88. <7>pcpu-alloc: [0] 0
  89. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  90. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  91. <6>PID hash table entries: 4096 (order: 2, 16384 bytes)
  92. <6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  93. <6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  94. <6>Memory: 448MB 512MB = 960MB total
  95. <5>Memory: 835132k/835132k available, 147908k reserved, 393216K highmem
  96. <5>Virtual kernel memory layout:
  97. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  98. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  99. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  100. vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  101. lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  102. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  103. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  104. .init : 0xc0008000 - 0xc0030000 ( 160 kB)
  105. .text : 0xc0030000 - 0xc071a000 (7080 kB)
  106. .data : 0xc071a000 - 0xc0757fa0 ( 248 kB)
  107. .bss : 0xc0757fc4 - 0xc080d050 ( 725 kB)
  108. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  109. <6>NR_IRQS:96 nr_irqs:96 96
  110. <6>timer0: Periodic Mode
  111. <6>Console: colour dummy device 80x30
  112. <6>Calibrating delay loop... <c>383.38 BogoMIPS (lpj=1916928)
  113. <6>pid_max: default: 32768 minimum: 301
  114. <6>Mount-cache hash table entries: 512
  115. <6>Initializing cgroup subsys cpuacct
  116. <6>Initializing cgroup subsys devices
  117. <6>Initializing cgroup subsys freezer
  118. <6>Initializing cgroup subsys blkio
  119. <6>CPU: Testing write buffer coherency: ok
  120. <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  121. <6>devtmpfs: initialized
  122. <6>print_constraints: dummy:
  123. <6>NET: Registered protocol family 16
  124. <6>hw-breakpoint: debug architecture 0x4 unsupported.
  125. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  126. <6>Initialize DMAC OK
  127. <6>bio: create slab <bio-0> at 0
  128. <5>SCSI subsystem initialized
  129. <7>libata version 3.00 loaded.
  130. <6>usbcore: registered new interface driver usbfs
  131. <6>usbcore: registered new interface driver hub
  132. <6>usbcore: registered new device driver usb
  133. <6>Advanced Linux Sound Architecture Driver Version 1.0.24.
  134. Init eGon pin module V2.0
  135. <6>Switching to clocksource aw 64bits couter
  136. <5>FS-Cache: Loaded
  137. <6>CacheFiles: Loaded
  138. <6>Switched to NOHz mode on CPU #0
  139. [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  140. [sw_hcd0]: usb host driver initialize........
  141. [sw_hcd0]: open_usb_clock
  142. [sw_hcd0]: host_init_state = 0
  143. [sw_hcd0]: platform is usb host
  144. [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  145. [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  146. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  147. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  148. <6>hub 1-0:1.0: USB hub found
  149. <6>hub 1-0:1.0: 1 port detected
  150. wrn: hcd is not enable, need not start hcd
  151. [sw_hcd0]: sw_usb_host0_disable start
  152. -------sw_hcd0_soft_disconnect---------
  153. [sw_hcd_host0]: Set USB Power OFF
  154. wrn: hcd is not enable, need not stop hcd
  155. [sw_hcd0]: close_usb_clock
  156. [sw_hcd0]: sw_usb_host0_disable end
  157. [sw_udc]: udc_init: version 20080411
  158. <6>NET: Registered protocol family 2
  159. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  160. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  161. <6>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  162. <6>TCP: Hash tables configured (established 131072 bind 65536)
  163. <6>TCP reno registered
  164. <6>UDP hash table entries: 512 (order: 1, 8192 bytes)
  165. <6>UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  166. <6>NET: Registered protocol family 1
  167. <6>RPC: Registered named UNIX socket transport module.
  168. <6>RPC: Registered udp transport module.
  169. <6>RPC: Registered tcp transport module.
  170. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  171. [pm]aw_pm_init!
  172. <6>audit: initializing netlink socket (disabled)
  173. <5>type=2000 audit(0.349:1): initialized
  174. highmem bounce pool size: 64 pages
  175. <5>VFS: Disk quotas dquot_6.5.2
  176. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  177. <6>NTFS driver 2.1.30 [Flags: R/W].
  178. <6>fuse init (API version 7.16)
  179. <6>msgmni has been set to 863
  180. <6>alg: No test for stdrng (krng)
  181. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  182. <6>io scheduler noop registered
  183. <6>io scheduler deadline registered
  184. <6>io scheduler cfq registered (default)
  185. <6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  186. <6>serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  187. [ 0.000000] Initializing cgroup subsys cpuset
  188. [ 0.000000] Linux version 3.0.57 (george@george-VirtualBox) (gcc version 4.7.3 20121205 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2012.12-201212
  189. 14 - Linaro GCC 2012.12) ) #3 PREEMPT Sun Jan 27 22:41:29 PST 2013
  190. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  191. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  192. [ 0.000000] Machine: sun4i
  193. [ 0.000000] Memory cut off:
  194. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  195. [ 0.000000] Ignoring unrecognised tag 0x00000000
  196. [ 0.000000] Memory Reserved:
  197. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  198. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  199. [ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
  200. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  201. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  202. [ 0.000000] BROM Ver: 1100 1100 1623
  203. [ 0.000000] chip-id: A10 (AW1623 revision C)
  204. [ 0.000000] On node 0 totalpages: 245760
  205. [ 0.000000] free_area_init_node: node 0, pgdat c07535e8, node_mem_map c080e000
  206. [ 0.000000] Normal zone: 1280 pages used for memmap
  207. [ 0.000000] Normal zone: 0 pages reserved
  208. [ 0.000000] Normal zone: 146176 pages, LIFO batch:31
  209. [ 0.000000] HighMem zone: 768 pages used for memmap
  210. [ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
  211. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  212. [ 0.000000] pcpu-alloc: [0] 0
  213. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  214. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  215. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  216. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  217. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  218. [ 0.000000] Memory: 448MB 512MB = 960MB total
  219. [ 0.000000] Memory: 835132k/835132k available, 147908k reserved, 393216K highmem
  220. [ 0.000000] Virtual kernel memory layout:
  221. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  222. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  223. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  224. [ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  225. [ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  226. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  227. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  228. [ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
  229. [ 0.000000] .text : 0xc0030000 - 0xc071a000 (7080 kB)
  230. [ 0.000000] .data : 0xc071a000 - 0xc0757fa0 ( 248 kB)
  231. [ 0.000000] .bss : 0xc0757fc4 - 0xc080d050 ( 725 kB)
  232. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  233. [ 0.000000] NR_IRQS:96 nr_irqs:96 96
  234. [ 0.000000] timer0: Periodic Mode
  235. [ 0.000000] Console: colour dummy device 80x30
  236. [ 0.000000] Calibrating delay loop... 383.38 BogoMIPS (lpj=1916928)
  237. [ 0.050000] pid_max: default: 32768 minimum: 301
  238. [ 0.050000] Mount-cache hash table entries: 512
  239. [ 0.060000] Initializing cgroup subsys cpuacct
  240. [ 0.060000] Initializing cgroup subsys devices
  241. [ 0.060000] Initializing cgroup subsys freezer
  242. [ 0.070000] Initializing cgroup subsys blkio
  243. [ 0.070000] CPU: Testing write buffer coherency: ok
  244. [ 0.070000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  245. [ 0.080000] devtmpfs: initialized
  246. [ 0.090000] print_constraints: dummy:
  247. [ 0.090000] NET: Registered protocol family 16
  248. [ 0.100000] hw-breakpoint: debug architecture 0x4 unsupported.
  249. [ 0.100000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  250. [ 0.100000] Initialize DMAC OK
  251. [ 0.110000] bio: create slab <bio-0> at 0
  252. [ 0.120000] SCSI subsystem initialized
  253. [ 0.120000] libata version 3.00 loaded.
  254. [ 0.120000] usbcore: registered new interface driver usbfs
  255. [ 0.130000] usbcore: registered new interface driver hub
  256. [ 0.130000] usbcore: registered new device driver usb
  257. [ 0.140000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  258. [ 0.140000] Init eGon pin module V2.0
  259. [ 0.150000] Switching to clocksource aw 64bits couter
  260. [ 0.150000] FS-Cache: Loaded
  261. [ 0.150000] CacheFiles: Loaded
  262. [ 0.160000] Switched to NOHz mode on CPU #0
  263. [ 0.170000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  264. [ 0.170000] [sw_hcd0]: usb host driver initialize........
  265. [ 0.180000] [sw_hcd0]: open_usb_clock
  266. [ 0.200000] [sw_hcd0]: host_init_state = 0
  267. [ 0.200000] [sw_hcd0]: platform is usb host
  268. [ 0.210000] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  269. [ 0.220000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  270. [ 0.230000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  271. [ 0.230000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  272. [ 0.240000] hub 1-0:1.0: USB hub found
  273. [ 0.240000] hub 1-0:1.0: 1 port detected
  274. [ 0.240000] wrn: hcd is not enable, need not start hcd
  275. [ 0.250000] [sw_hcd0]: sw_usb_host0_disable start
  276. [ 0.250000] -------sw_hcd0_soft_disconnect---------
  277. [ 0.250000] [sw_hcd_host0]: Set USB Power OFF
  278. [ 0.250000] wrn: hcd is not enable, need not stop hcd
  279. [ 0.260000] [sw_hcd0]: close_usb_clock
  280. [ 0.270000] [sw_hcd0]: sw_usb_host0_disable end
  281. [ 0.270000] [sw_udc]: udc_init: version 20080411
  282. [ 0.270000] NET: Registered protocol family 2
  283. [ 0.280000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  284. [ 0.280000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  285. [ 0.290000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  286. [ 0.300000] TCP: Hash tables configured (established 131072 bind 65536)
  287. [ 0.310000] TCP reno registered
  288. [ 0.310000] UDP hash table entries: 512 (order: 1, 8192 bytes)
  289. [ 0.310000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  290. [ 0.320000] NET: Registered protocol family 1
  291. [ 0.320000] RPC: Registered named UNIX socket transport module.
  292. [ 0.330000] RPC: Registered udp transport module.
  293. [ 0.330000] RPC: Registered tcp transport module.
  294. [ 0.340000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  295. [ 0.340000] [pm]aw_pm_init!
  296. [ 0.340000] audit: initializing netlink socket (disabled)
  297. [ 0.350000] type=2000 audit(0.349:1): initialized
  298. [ 0.350000] highmem bounce pool size: 64 pages
  299. [ 0.370000] VFS: Disk quotas dquot_6.5.2
  300. [ 0.380000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  301. [ 0.390000] NTFS driver 2.1.30 [Flags: R/W].
  302. [ 0.390000] fuse init (API version 7.16)
  303. [ 0.400000] msgmni has been set to 863
  304. [ 0.410000] alg: No test for stdrng (krng)
  305. [ 0.410000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  306. [ 0.420000] io scheduler noop registered
  307. [ 0.420000] io scheduler deadline registered
  308. [ 0.420000] io scheduler cfq registered (default)
  309. [ 0.430000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  310. [ 0.460000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  311. <6>console [ttyS0] enabled
  312. [ 1.110000] console [ttyS0] enabled
  313. [uart]: used uart info.: 0x05
  314. [ 1.120000] [uart]: used uart info.: 0x05
  315. <6>serial probe 0 irq 1 mapbase 0x01c28000
  316. [ 1.130000] serial probe 0 irq 1 mapbase 0x01c28000
  317. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  318. [ 1.160000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  319. <6>serial probe 2 irq 3 mapbase 0x01c28800
  320. [ 1.170000] serial probe 2 irq 3 mapbase 0x01c28800
  321. <6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  322. [ 1.200000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  323. <7>G2D: drv_g2d_init
  324. [ 1.210000] G2D: drv_g2d_init
  325. <6>G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  326. [ 1.220000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  327. <6>G2D: head:d8000000,tail:d9000000
  328. [ 1.230000] G2D: head:d8000000,tail:d9000000
  329. <6>G2D: Module initialized.major:252
  330. [ 1.230000] G2D: Module initialized.major:252
  331. <6>brd: module loaded
  332. [ 1.240000] brd: module loaded
  333. <6>loop: module loaded
  334. [ 1.260000] loop: module loaded
  335. [NAND]nand driver, init.
  336. [ 1.260000] [NAND]nand driver, init.
  337. cmu_clk is 480
  338. [ 1.270000] cmu_clk is 480
  339. nand clk init end
  340. [ 1.270000] nand clk init end
  341. offset 0xc: 0x6140
  342. [ 1.280000] offset 0xc: 0x6140
  343. offset 0x14: 0x8200000b
  344. [ 1.280000] offset 0x14: 0x8200000b
  345. [NAND] nand gpio_request
  346. [ 1.290000] [NAND] nand gpio_request
  347. [NAND] nand driver version: 0x2 0x9
  348. [ 1.290000] [NAND] nand driver version: 0x2 0x9
  349. nand interrupte register ok
  350. [ 1.300000] nand interrupte register ok
  351. ret of NFC_ChangMode is 0
  352. [ 1.310000] ret of NFC_ChangMode is 0
  353. dma_hdle is 0
  354. [ 1.310000] dma_hdle is 0
  355. dma_hdle is 10000008
  356. [ 1.320000] dma_hdle is 10000008
  357. cmu_clk is 480
  358. [ 1.320000] cmu_clk is 480
  359. nand clk init end
  360. [ 1.330000] nand clk init end
  361. offset 0xc: 0x6140
  362. [ 1.330000] offset 0xc: 0x6140
  363. offset 0x14: 0x82000007
  364. [ 1.340000] offset 0x14: 0x82000007
  365. The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7979008
  366. [ 1.400000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk size = 7979008
  367. The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
  368. [ 1.420000] The 1 disk name = bootloader, type = 0, class name = DISK, disk size = 32768
  369. The 2 disk name = env, type = 0, class name = DISK, disk size = 32768
  370. [ 1.430000] The 2 disk name = env, type = 0, class name = DISK, disk size = 32768
  371. The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
  372. [ 1.440000] The 3 disk name = boot, type = 0, class name = DISK, disk size = 65536
  373. The 4 disk name = system, type = 1, class name = DISK, disk size = 655360
  374. [ 1.460000] The 4 disk name = system, type = 1, class name = DISK, disk size = 655360
  375. The 5 disk name = data, type = 1, class name = DISK, disk size = 1048576
  376. [ 1.470000] The 5 disk name = data, type = 1, class name = DISK, disk size = 1048576
  377. The 6 disk name = misc, type = 0, class name = DISK, disk size = 32768
  378. [ 1.490000] The 6 disk name = misc, type = 0, class name = DISK, disk size = 32768
  379. The 7 disk name = recovery, type = 0, class name = DISK, disk size = 65536
  380. [ 1.500000] The 7 disk name = recovery, type = 0, class name = DISK, disk size = 65536
  381. The 8 disk name = cache, type = 1, class name = DISK, disk size = 262144
  382. [ 1.520000] The 8 disk name = cache, type = 1, class name = DISK, disk size = 262144
  383. The 9 disk name = private, type = 0, class name = DISK, disk size = 32768
  384. [ 1.530000] The 9 disk name = private, type = 0, class name = DISK, disk size = 32768
  385. The 10 disk name = sysrecovery, type = 0, class name = DISK, disk size = 655360
  386. [ 1.540000] The 10 disk name = sysrecovery, type = 0, class name = DISK, disk size = 655360
  387. The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 4816896
  388. [ 1.560000] The 11 disk name = UDISK, type = 0, class name = DISK, disk size = 4816896
  389. The 11 disk size = 5062656
  390. [ 1.570000] The 11 disk size = 5062656
  391. part total count = 12
  392. [ 1.580000] part total count = 12
  393. <6> nand: unknown partition table
  394. [ 1.590000] nand: unknown partition table
  395. <6> nanda:
  396. [ 1.600000] nanda:
  397. <6> nandb: unknown partition table
  398. [ 1.600000] nandb: unknown partition table
  399. <6> nandc: unknown partition table
  400. [ 1.610000] nandc: unknown partition table
  401. <6> nandd: unknown partition table
  402. [ 1.620000] nandd: unknown partition table
  403. <6> nande: unknown partition table
  404. [ 1.630000] nande: unknown partition table
  405. <6> nandf: unknown partition table
  406. [ 1.640000] nandf: unknown partition table
  407. <6> nandg: unknown partition table
  408. [ 1.650000] nandg: unknown partition table
  409. <6> nandh: unknown partition table
  410. [ 1.660000] nandh: unknown partition table
  411. <6> nandi:
  412. [ 1.670000] nandi:
  413. <6> nandj: unknown partition table
  414. [ 1.680000] nandj: unknown partition table
  415. <6> nandk:
  416. [ 1.690000] nandk:
  417. <6>benn: nand probe enter
  418. [ 1.690000] benn: nand probe enter
  419. [NAND]nand driver, ok.
  420. [ 1.700000] [NAND]nand driver, ok.
  421. <6>wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
  422. [ 1.700000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wemac.c
  423. <6>[EMAC] ahb clk enable
  424. [ 1.720000] [EMAC] ahb clk enable
  425. <6>[EMAC] ahb gate clk: 0x26140
  426. [ 1.720000] [EMAC] ahb gate clk: 0x26140
  427. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  428. [ 1.760000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  429. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  430. [ 1.770000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  431. [sw-ehci1]: open clock
  432. [ 1.780000] [sw-ehci1]: open clock
  433. [sw-ehci1]: Set USB Power ON
  434. [ 1.810000] [sw-ehci1]: Set USB Power ON
  435. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  436. [ 1.810000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  437. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  438. [ 1.830000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  439. <6>sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  440. [ 1.840000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  441. <6>sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  442. [ 1.870000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  443. ehci_irq: port change detect
  444. [ 1.870000] ehci_irq: port change detect
  445. <6>hub 2-0:1.0: USB hub found
  446. [ 1.880000] hub 2-0:1.0: USB hub found
  447. <6>hub 2-0:1.0: 1 port detected
  448. [ 1.890000] hub 2-0:1.0: 1 port detected
  449. [sw-ohci1]: open clock
  450. [ 1.900000] [sw-ohci1]: open clock
  451. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  452. [ 1.920000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  453. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  454. [ 1.940000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  455. <6>sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  456. [ 1.950000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  457. <6>hub 3-0:1.0: USB hub found
  458. [ 2.020000] hub 3-0:1.0: USB hub found
  459. <6>hub 3-0:1.0: 1 port detected
  460. [ 2.030000] hub 3-0:1.0: 1 port detected
  461. [sw-ehci2]: open clock
  462. [ 2.030000] [sw-ehci2]: open clock
  463. [sw-ehci2]: Set USB Power ON
  464. [ 2.060000] [sw-ehci2]: Set USB Power ON
  465. <6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  466. [ 2.070000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  467. <6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  468. [ 2.080000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  469. <6>sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  470. [ 2.090000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  471. ehci_irq: port change detect
  472. [ 2.100000] ehci_irq: port change detect
  473. The port change to OHCI now!
  474. [ 2.170000] The port change to OHCI now!
  475. <6>sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  476. [ 2.190000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  477. ehci_irq: port change detect
  478. [ 2.190000] ehci_irq: port change detect
  479. <6>hub 4-0:1.0: USB hub found
  480. [ 2.200000] hub 4-0:1.0: USB hub found
  481.  
  482.  
  483. insmod_device_driver
  484.  
  485. [ 2.210000]
  486. [ 2.210000]
  487. [ 2.210000] insmod_device_driver
  488. [ 2.210000]
  489. <6>hub 4-0:1.0: 1 port detected
  490. [ 2.220000] hub 4-0:1.0: 1 port detected
  491. [sw_udc]: [ 2.230000] [sw_udc]: sw_usb_device_enable start
  492. sw_usb_device_enable start
  493. [sw_udc]: [ 2.230000] [sw_udc]: [sw-ohci2]: open clock
  494. [sw-ohci2]: open clock
  495. usb_vbase = 0xf1c13000
  496. [ 2.250000] usb_vbase = 0xf1c13000
  497. [sw_udc]: [ 2.250000] [sw_udc]: sram_vbase = 0xf1c00000
  498. sram_vbase = 0xf1c00000
  499. [sw_udc]: [ 2.270000] [sw_udc]: open_usb_clock
  500. open_usb_clock
  501. <6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  502. [ 2.300000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  503. <6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  504. [ 2.320000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  505. udc->driver is null, udc is need not stop
  506. [ 2.330000] udc->driver is null, udc is need not stop
  507. <6>sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  508. [ 2.340000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  509. [sw_udc]: [ 2.350000] [sw_udc]: sw_usb_device_enable end
  510. sw_usb_device_enable end
  511. <6>usb 3-1: new low speed USB device number 2 using sw-ohci
  512. [ 2.370000] usb 3-1: new low speed USB device number 2 using sw-ohci
  513. <6>hub 5-0:1.0: USB hub found
  514. [ 2.410000] hub 5-0:1.0: USB hub found
  515. <6>hub 5-0:1.0: 1 port detected
  516. [ 2.420000] hub 5-0:1.0: 1 port detected
  517. <6>Initializing USB Mass Storage driver...
  518. [ 2.420000] Initializing USB Mass Storage driver...
  519. <6>usbcore: registered new interface driver usb-storage
  520. [ 2.430000] usbcore: registered new interface driver usb-storage
  521. <6>USB Mass Storage support registered.
  522. [ 2.440000] USB Mass Storage support registered.
  523. <6>usbcore: registered new interface driver ums-cypress
  524. [ 2.450000] usbcore: registered new interface driver ums-cypress
  525. <6>usbcore: registered new interface driver ums_eneub6250
  526. [ 2.460000] usbcore: registered new interface driver ums_eneub6250
  527. <6>usbcore: registered new interface driver ums-sddr09
  528. [ 2.480000] usbcore: registered new interface driver ums-sddr09
  529. <6>usbcore: registered new interface driver ums-sddr55
  530. [ 2.490000] usbcore: registered new interface driver ums-sddr55
  531. <6>usbcore: registered new interface driver ums-usbat
  532. [ 2.500000] usbcore: registered new interface driver ums-usbat
  533. <6>mousedev: PS/2 mouse device common for all mice
  534. [ 2.510000] mousedev: PS/2 mouse device common for all mice
  535. sun4i-ts.c: sun4i_ts_init: start ...
  536. [ 2.520000] sun4i-ts.c: sun4i_ts_init: start ...
  537. rtp_used == 1.
  538. [ 2.530000] rtp_used == 1.
  539. sun4i-ts: tp_screen_size is 5 inch.
  540. [ 2.530000] sun4i-ts: tp_screen_size is 5 inch.
  541. sun4i-ts: tp_regidity_level is 5.
  542. [ 2.540000] sun4i-ts: tp_regidity_level is 5.
  543. sun4i-ts: tp_press_threshold_enable is 0.
  544. [ 2.550000] sun4i-ts: tp_press_threshold_enable is 0.
  545. sun4i-ts: rtp_sensitive_level is 15.
  546. [ 2.560000] sun4i-ts: rtp_sensitive_level is 15.
  547. sun4i-ts: rtp_exchange_x_y_flag is 0.
  548. [ 2.560000] sun4i-ts: rtp_exchange_x_y_flag is 0.
  549. sun4i-ts.c: sun4i_ts_probe: start...
  550. [ 2.570000] sun4i-ts.c: sun4i_ts_probe: start...
  551. begin get platform resourec
  552. [ 2.580000] begin get platform resourec
  553. <6>input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
  554. [ 2.590000] input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
  555. tp init
  556. [ 2.600000] tp init
  557. sun4i-ts.c: sun4i_ts_probe: end
  558. [ 2.600000] sun4i-ts.c: sun4i_ts_probe: end
  559. sunxi RTC version 0.1
  560. [ 2.610000] sunxi RTC version 0.1
  561. <6>sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
  562. [ 2.620000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
  563. [RTC] ERR: Set LOSC to external failed!!!
  564. [ 2.630000] [RTC] ERR: Set LOSC to external failed!!!
  565. [RTC] WARNING: Rtc time will be wrong!!
  566. [ 2.640000] [RTC] WARNING: Rtc time will be wrong!!
  567. <6>using rtc device, rtc, for alarms[ 2.650000] using rtc device, rtc, for alarms<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  568.  
  569. [ 2.650000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  570. <6>i2c /dev entries driver
  571. [ 2.670000] i2c /dev entries driver
  572. !!! base_Addr = 0xe88d2c00
  573. [ 2.670000] !!! base_Addr = 0xe88d2c00
  574. ehci_irq: port change detect
  575. [ 2.680000] ehci_irq: port change detect
  576. config i2c gpio with gpio_config api
  577. [ 2.690000] config i2c gpio with gpio_config api
  578. twi0, apb clock = 24000000
  579. [ 2.700000] twi0, apb clock = 24000000
  580. <6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  581. [ 2.700000] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  582. <6>I2C: i2c-0: AW16XX I2C adapter
  583. [ 2.720000] I2C: i2c-0: AW16XX I2C adapter
  584. **********start************
  585. [ 2.720000] **********start************
  586. 0x40
  587. [ 2.730000] 0x40
  588. 0xf8
  589. [ 2.730000] 0xf8
  590. 0x28
  591. [ 2.730000] 0x28
  592. 0x0
  593. [ 2.740000] 0x0
  594. 0x0
  595. [ 2.740000] 0x0
  596. **********end************
  597. [ 2.740000] **********end************
  598. !!! base_Addr = 0xe88d4000
  599. [ 2.750000] !!! base_Addr = 0xe88d4000
  600. twi1, apb clock = 24000000
  601. [ 2.750000] twi1, apb clock = 24000000
  602. The port change to OHCI now!
  603. [ 2.760000] The port change to OHCI now!
  604. <6>I2C: i2c-1: AW16XX I2C adapter
  605. [ 2.770000] I2C: i2c-1: AW16XX I2C adapter
  606. **********start************
  607. [ 2.780000] **********start************
  608. 0x40
  609. [ 2.780000] 0x40
  610. 0xf8
  611. [ 2.780000] 0xf8
  612. 0x58
  613. [ 2.790000] 0x58
  614. 0x0
  615. [ 2.790000] 0x0
  616. 0x0
  617. [ 2.790000] 0x0
  618. **********end************
  619. [ 2.790000] **********end************
  620. !!! base_Addr = 0xe88d6400
  621. [ 2.800000] !!! base_Addr = 0xe88d6400
  622. twi2, apb clock = 24000000
  623. [ 2.810000] twi2, apb clock = 24000000
  624. <6>I2C: i2c-2: AW16XX I2C adapter
  625. [ 2.810000] I2C: i2c-2: AW16XX I2C adapter
  626. **********start************
  627. [ 2.820000] **********start************
  628. 0x40
  629. [ 2.830000] 0x40
  630. 0xf8
  631. [ 2.830000] 0xf8
  632. 0x58
  633. [ 2.830000] 0x58
  634. 0x0
  635. [ 2.830000] 0x0
  636. 0x0
  637. [ 2.840000] 0x0
  638. **********end************
  639. [ 2.840000] **********end************
  640. <6>Linux video capture interface: v2.00
  641. [ 2.850000] Linux video capture interface: v2.00
  642. [cedar dev]: install start!!!
  643. [ 2.850000] [cedar dev]: install start!!!
  644. [cedar dev]: install end!!!
  645. [ 2.860000] [cedar dev]: install end!!!
  646. [ace_drv] start!!!
  647. [ 2.870000] [ace_drv] start!!!
  648. [ace_drv] init end!!!
  649. [ 2.870000] [ace_drv] init end!!!
  650. [pa_drv] start!!!
  651. [ 2.880000] [pa_drv] start!!!
  652. [pa_drv] init end!!!
  653. [ 2.880000] [pa_drv] init end!!!
  654. <6>print_constraints: axp20_ldo1: 1300 mV
  655. [ 2.890000] print_constraints: axp20_ldo1: 1300 mV
  656. <6>print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  657. [ 2.900000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  658. <6>print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  659. [ 2.910000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  660. <6>print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  661. [ 2.930000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  662. <6>print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  663. [ 2.940000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  664. <6>print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  665. [ 2.960000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  666. <6>print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  667. [ 2.970000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  668. <6>input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  669. [ 2.980000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  670. <6>cpuidle: using governor ladder
  671. [ 3.020000] cpuidle: using governor ladder
  672. <6>cpuidle: using governor menu
  673. [ 3.030000] cpuidle: using governor menu
  674. [mmc_pm]: no sdio card used in configuration
  675. [ 3.030000] [mmc_pm]: no sdio card used in configuration
  676. [mmc]: sunximmc_init
  677. [ 3.040000] [mmc]: sunximmc_init
  678. [mmc]: sunxi mmc controller using config : 0xb
  679. [ 3.050000] [mmc]: sunxi mmc controller using config : 0xb
  680. [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  681. [ 3.060000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  682. [mmc]: mmc 0 power off !!
  683. [ 3.070000] [mmc]: mmc 0 power off !!
  684. <6>usb 5-1: new low speed USB device number 2 using sw-ohci
  685. [ 3.080000] usb 5-1: new low speed USB device number 2 using sw-ohci
  686. [mmc]: mmc0 Probe: base:0xe88de000 irq:32 dma:0 pdes:0xe7bf8000, ret 0.
  687. [ 3.090000] [mmc]: mmc0 Probe: base:0xe88de000 irq:32 dma:0 pdes:0xe7bf8000, ret 0.
  688. [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  689. [ 3.100000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  690. [mmc]: mmc 1 power off !!
  691. [ 3.120000] [mmc]: mmc 1 power off !!
  692. [mmc]: mmc1 Probe: base:0xe88e0000 irq:33 dma:0 pdes:0xe7000000, ret 0.
  693. [ 3.120000] [mmc]: mmc1 Probe: base:0xe88e0000 irq:33 dma:0 pdes:0xe7000000, ret 0.
  694. [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  695. [ 3.140000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  696. [mmc]: mmc 3 power off !!
  697. [ 3.150000] [mmc]: mmc 3 power off !!
  698. [mmc]: mmc3 Probe: base:0xe88e2000 irq:35 dma:0 pdes:0xe7004000, ret 0.
  699. [ 3.150000] [mmc]: mmc3 Probe: base:0xe88e2000 irq:35 dma:0 pdes:0xe7004000, ret 0.
  700. <6>input: BTC USB Multimedia Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input2
  701. [ 3.180000] input: BTC USB Multimedia Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input2
  702. <6>generic-usb 0003:046E:5500.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-sw-ohci-1/input0
  703. [ 3.200000] generic-usb 0003:046E:5500.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-sw-ohci-1/input0
  704. <6>input: BTC USB Multimedia Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input3
  705. [ 3.260000] input: BTC USB Multimedia Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input3
  706. <6>generic-usb 0003:046E:5500.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-sw-ohci-1/input1
  707. [ 3.280000] generic-usb 0003:046E:5500.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-sw-ohci-1/input1
  708. <6>usbcore: registered new interface driver usbhid
  709. [ 3.300000] usbcore: registered new interface driver usbhid
  710. <6>usbhid: USB HID core driver
  711. [ 3.310000] usbhid: USB HID core driver
  712. enter sun4i Audio codec!!!
  713. [ 3.320000] enter sun4i Audio codec!!!
  714. <6>sun4i audio support initialized
  715. [ 3.330000] sun4i audio support initialized
  716. sun4i Audio codec successfully loaded..
  717. [ 3.340000] sun4i Audio codec successfully loaded..
  718. <6>asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  719. [ 3.350000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  720. <6>ALSA device list:
  721. [ 3.360000] ALSA device list:
  722. <6> #0: sun4i-CODEC Audio Codec
  723. [ 3.370000] #0: sun4i-CODEC Audio Codec
  724. <6> #1: sun4i-sndhdmi
  725. [ 3.370000] #1: sun4i-sndhdmi
  726. <6>IPv4 over IPv4 tunneling driver
  727. [ 3.380000] IPv4 over IPv4 tunneling driver
  728. <6>TCP cubic registered
  729. [ 3.390000] TCP cubic registered
  730. <6>Initializing XFRM netlink socket
  731. [ 3.390000] Initializing XFRM netlink socket
  732. <6>input: Microsoft Microsoft IntelliMouse® Explorer as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.0/input/input4
  733. [ 3.400000] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/platform/sw-ohci.2/usb5/5-1/5-1:1.0/input/input4
  734. <6>NET: Registered protocol family 10
  735. [ 3.430000] NET: Registered protocol family 10
  736. <6>NET: Registered protocol family 17
  737. [ 3.440000] NET: Registered protocol family 17
  738. <6>NET: Registered protocol family 15
  739. [ 3.440000] NET: Registered protocol family 15
  740. <6>802.1Q VLAN Support v1.8
  741. [ 3.450000] 802.1Q VLAN Support v1.8
  742. <6>generic-usb 0003:045E:001E.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-sw-ohci-1/input0
  743. [ 3.460000] generic-usb 0003:045E:001E.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-sw-ohci-1/inpu
  744. t0
  745. [mmc_pm]: No sdio card, please check your config !!
  746. [ 3.490000] [mmc_pm]: No sdio card, please check your config !!
  747. <5>Registering the dns_resolver key type
  748. [ 3.500000] Registering the dns_resolver key type
  749. <6>VFP support v0.3: [ 3.510000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  750. implementor 41 architecture 3 part 30 variant c rev 3
  751. <5>Registering SWP/SWPB emulation handler
  752. [ 3.520000] Registering SWP/SWPB emulation handler
  753. <6>registered taskstats version 1
  754. [ 3.530000] registered taskstats version 1
  755. <4>regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  756. [ 3.540000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  757. <4>regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  758. [ 3.550000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  759. <4>regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  760. [ 3.570000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  761. <4>regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  762. [ 3.580000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  763. <4>regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  764. [ 3.600000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  765. <4>regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  766. [ 3.610000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  767. <3>sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  768. [ 3.630000] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  769. <6>Waiting for root device /dev/mmcblk0p2...
  770. [ 3.640000] Waiting for root device /dev/mmcblk0p2...
  771. [mmc]: mmc 0 detect change, present 1
  772. [ 4.090000] [mmc]: mmc 0 detect change, present 1
  773. [mmc]: mmc 0 power on !!
  774. [ 4.390000] [mmc]: mmc 0 power on !!
  775. [mmc]: sdxc_request_done(L1113): [ 4.430000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  776. smc 0 err, cmd 52, RTO !!
  777. [mmc]: sdxc_request_done(L1113): [ 4.440000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  778. smc 0 err, cmd 52, RTO !!
  779. [mmc]: sdxc_request_done(L1113): [ 4.460000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  780. smc 0 err, cmd 5, RTO !!
  781. [mmc]: sdxc_request_done(L1113): [ 4.470000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  782. smc 0 err, cmd 5, RTO !!
  783. [mmc]: sdxc_request_done(L1113): [ 4.480000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  784. smc 0 err, cmd 5, RTO !!
  785. [mmc]: sdxc_request_done(L1113): [ 4.490000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  786. smc 0 err, cmd 5, RTO !!
  787. <6>mmc0: new high speed SDHC card at address aaaa
  788. [ 4.540000] mmc0: new high speed SDHC card at address aaaa
  789. <6>mmcblk0: mmc0:aaaa SU08G 7.40 GiB
  790. [ 4.550000] mmcblk0: mmc0:aaaa SU08G 7.40 GiB
  791. <6> mmcblk0: p1 p2
  792. [ 4.560000] mmcblk0: p1 p2
  793. <3>EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  794. [ 4.640000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  795. <3>EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
  796. [ 4.650000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
  797. <6>EXT4-fs (mmcblk0p2): recovery complete
  798. [ 32.840000] EXT4-fs (mmcblk0p2): recovery complete
  799. <6>EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  800. [ 32.850000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  801. <6>VFS: Mounted root (ext4 filesystem) on device 179:2.
  802. [ 32.870000] VFS: Mounted root (ext4 filesystem) on device 179:2.
  803. <6>devtmpfs: mounted
  804. [ 32.910000] devtmpfs: mounted
  805. <6>Freeing init memory: 160K
  806. [ 32.920000] Freeing init memory: 160K
  807. <4>init: ureadahead main process (50) terminated with status 5
  808. [ 35.060000] init: ureadahead main process (50) terminated with status 5
  809. [mmc_pm]: No sdio card, please check your config !!
  810. <30>udevd[135]: starting version 175
  811. <4>init: gator-daemon main process (142) terminated with status 1
  812. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  813. <4>init: bluetooth main process (304) terminated with status 1
  814. <4>init: bluetooth main process ended, respawning
  815. <4>init: udev-fallback-graphics main process (369) terminated with status 1
  816. <4>init: bluetooth main process (397) terminated with status 1
  817. <4>init: bluetooth main process ended, respawning
  818. <4>init: failsafe main process (405) killed by TERM signal
  819. <4>wemac wemac.0: WARNING: no IRQ resource flags set.
  820. <4>init: bluetooth main process (464) terminated with status 1
  821. <4>init: bluetooth main process ended, respawning
  822. <6>wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
  823. <6>Console: switching to colour frame buffer device 170x48
  824.  
  825. UMP<2>: Inserting UMP device driver. Compiled: Jan 27 2013, time: 22:39:48
  826. UMP<2>: Using OS memory backend, allocation limit: 134217728
  827. UMP: UMP device driver loaded
  828. <4>init: hybrid-gfx main process (545) terminated with status 1
  829. <6>mali: use config clk_div 3
  830. <6>mali: clk_div 3
  831. Mali: mali clock set completed, clock is 320000000 Mhz
  832. <6>mali: use config clk_div 3
  833. <6>mali: clk_div 3
  834. Mali: mali clock set completed, clock is 320000000 Mhz
  835. Mali: Mali device driver loaded
  836. <4>init: bluetooth main process (569) terminated with status 1
  837. <4>init: bluetooth main process ended, respawning
  838. Last login: Tue Jan 29 18:49:45 PST 2013 on tty1
  839. <6>[drm] Initialized drm 1.1.0 20060810
  840. <6>Mali DRM initialize, driver name: mali_drm, version 2.1
  841. <6>[drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  842. <6>Mali DRM initialize, driver name: mali_drm, version 2.1
  843. <6>[drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  844. * CPUFreq Utilities: Setting ondemand CPUFreq governor... * CPU0... <4>init: bluetooth main process (675) terminated with status 1
  845. <4>init: bluetooth main process ended, respawning
  846. [ OK ]
  847. speech-dispatcher disabled; edit /etc/default/speech-dispatcher
  848. saned disabled; edit /etc/default/saned
  849. <4>init: plymouth-stop pre-start process (751) terminated with status 1
  850. <4>init: bluetooth main process (743) terminated with status 1
  851. <4>init: bluetooth main process ended, respawning
  852. <4>init: tty1 main process (757) killed by TERM signal
  853. <4>init: bluetooth main process (811) terminated with status 1
  854. <4>init: bluetooth main process ended, respawning
  855. Welcome to Linaro 12.11 (GNU/Linux 3.0.57 armv7l)
  856.  
  857. * Documentation: https://wiki.linaro.org/
  858.  
  859. <4>init: bluetooth main process (852) terminated with status 1
  860. <4>init: bluetooth main process ended, respawning
  861. <4>init: bluetooth main process (994) terminated with status 1
  862. <4>init: bluetooth main process ended, respawning
  863. <4>init: bluetooth main process (1033) terminated with status 1
  864. <4>init: bluetooth main process ended, respawning
  865. root@linaro-ubuntu-desktop:~# <4>init: bluetooth main process (1070) terminated with status 1
  866. <4>init: bluetooth main process ended, respawning
  867. <4>init: bluetooth main process (1110) terminated with status 1
  868. <4>init: bluetooth main process ended, respawning
  869. <4>init: bluetooth main process (1149) terminated with status 1
  870. <4>init: bluetooth main process ended, respawning
  871. <4>init: bluetooth main process (1183) terminated with status 1
  872. <4>init: bluetooth main process ended, respawning
  873. <4>init: bluetooth main process (1216) terminated with status 1
  874. <4>init: bluetooth main process ended, respawning
  875. <4>init: bluetooth main process (1246) terminated with status 1
  876. <4>init: bluetooth main process ended, respawning
  877. <4>init: bluetooth main process (1282) terminated with status 1
  878. <4>init: bluetooth main process ended, respawning
  879. <4>init: bluetooth main process (1305) terminated with status 1
  880. <4>init: bluetooth main process ended, respawning
  881. <4>init: bluetooth main process (1328) terminated with status 1
  882. <4>init: bluetooth main process ended, respawning
  883. <4>init: bluetooth main process (1353) terminated with status 1
  884. <4>init: bluetooth main process ended, respawning
  885. <4>init: bluetooth main process (1376) terminated with status 1
  886. <4>init: bluetooth respawning too fast, stopped
  887. [HDMI-AUDIO] PCM trigger start...
  888. [pm]valid
  889. [pm]valid
  890. [pm]valid
  891. [pm]valid
  892. [pm]valid
  893. [pm]valid
  894. [pm]valid
  895. [pm]valid
  896. [pm]valid
  897. [pm]valid
  898. [pm]valid
  899. [pm]valid
  900. [HDMI-AUDIO] PCM trigger stop...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!