Guest User

Untitled

a guest
Jul 30th, 2018
181
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.08 KB | None | 0 0
  1. pin@NetBSD-8 ~$ dmesg
  2. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
  3. 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
  4. 2018 The NetBSD Foundation, Inc. All rights reserved.
  5. Copyright (c) 1982, 1986, 1989, 1991, 1993
  6. The Regents of the University of California. All rights reserved.
  7.  
  8. NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
  9. [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
  10. total memory = 8073 MB
  11. avail memory = 7816 MB
  12. cpu_rng: RDRAND
  13. timecounter: Timecounters tick every 10.000 msec
  14. Kernelized RAIDframe activated
  15. running cgd selftest aes-xts-256 aes-xts-512 done
  16. timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
  17. Hewlett-Packard HP ProBook 6470b (A1029D1103)
  18. mainbus0 (root)
  19. cpu0 at mainbus0
  20. cpu0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, id 0x306a9
  21. cpu0: package 0, core 0, smt 0
  22. pci0 at mainbus0 bus 0: configuration mode 1
  23. pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
  24. pchb0 at pci0 dev 0 function 0: vendor 8086 product 0154 (rev. 0x09)
  25. i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0166 (rev. 0x09)
  26. drm: Memory usable by graphics device = 2048M
  27. drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
  28. drm: Driver supports precise vblank timestamp query.
  29. i915drmkms0: interrupting at irq 10 (i915)
  30. intelfb0 at i915drmkms0
  31. i915drmkms0: info: registered panic notifier
  32. intelfb0: framebuffer at 0xffff8000aced8000, size 1366x768, depth 32, stride 5504
  33. wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation)
  34. wsmux1: connecting to wsdisplay0
  35. xhci0 at pci0 dev 20 function 0: vendor 8086 product 1e31 (rev. 0x04)
  36. xhci0: memory access is disabled
  37. vendor 8086 product 1e3a (miscellaneous communications, revision 0x04) at pci0 dev 2
  38. wm0 at pci0 dev 25 function 0: PCH2 LAN (82579V) Controller (rev. 0x04)
  39. wm0: interrupting at irq 5
  40. wm0: PCI-Express bus
  41. wm0: 2048 words FLASH
  42. wm0: Ethernet address 6c:3b:e5:f2:7d:12
  43. wm0: 0xa4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT>
  44. ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
  45. ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, au
  46. ehci0 at pci0 dev 26 function 0: vendor 8086 product 1e2d (rev. 0x04)
  47. ehci0: interrupting at irq 10
  48. ehci0: BIOS has given up ownership
  49. ehci0: EHCI version 1.0
  50. usb0 at ehci0: USB revision 2.0
  51. hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
  52. hdaudio0: interrupting at irq 10
  53. hdafg0 at hdaudio0: vendor 111d product 7605
  54. hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
  55. hdafg0: ADC01 2ch: Line In [Jack], Mic In [Jack]
  56. hdafg0: DAC02 2ch: Speaker [Jack]
  57. hdafg0: ADC03 2ch: Mic In [Jack & Built-In]
  58. hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
  59. audio0 at hdafg0: full duplex, playback, capture, mmap, independent
  60. hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, freque
  61. hdafg0: Latency: 128 milliseconds
  62. spkr0 at audio0: PC Speaker (synthesized)
  63. hdafg1 at hdaudio0: vendor 8086 product 2806
  64. hdafg1: DP00 8ch: Digital Out [Jack]
  65. hdafg1: DP01 8ch: Digital Out [Jack]
  66. hdafg1: DP02 8ch: Digital Out [Jack]
  67. hdafg1: 8ch/0ch 48000Hz PCM16*
  68. ppb0 at pci0 dev 28 function 0: vendor 8086 product 1e10 (rev. 0xc4)
  69. ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/
  70. pci1 at ppb0 bus 1
  71. pci1: i/o space, memory space enabled, rd/line, wr/inv ok
  72. ppb1 at pci0 dev 28 function 1: vendor 8086 product 1e12 (rev. 0xc4)
  73. ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/
  74. pci2 at ppb1 bus 2
  75. pci2: i/o space, memory space enabled, rd/line, wr/inv ok
  76. ppb2 at pci0 dev 28 function 2: vendor 8086 product 1e14 (rev. 0xc4)
  77. ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/
  78. ppb2: link is x1 @ 2.5GT/s
  79. pci3 at ppb2 bus 35
  80. pci3: i/o space, memory space enabled, rd/line, wr/inv ok
  81. fwohci0 at pci3 dev 0 function 0: vendor 197b product 2380 (rev. 0x30)
  82. fwohci0: interrupting at irq 10
  83. fwohci0: OHCI version 1.10 (ROM=0)
  84. fwohci0: No. of Isochronous channels is 4.
  85. fwohci0: EUI64 ff:e4:73:ff:ff:ff:ff:fe
  86. fwohci0: Phy 1394a available S400, 2 ports.
  87. fwohci0: fwphy_rddata: 0x5 loop=100, retry=100
  88. fwohci0: fwphy_rddata: 0x2 loop=100, retry=100
  89. fwohci0: Link S400, max_rec 2048 bytes.
  90. ieee1394if0 at fwohci0: IEEE1394 bus
  91. fwip0 at ieee1394if0: IP over IEEE1394
  92. fwohci0: Initiate bus reset
  93. fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
  94. fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
  95. vendor 197b product 2392 (miscellaneous system, revision 0x30) at pci3 dev 0 functio
  96. sdhc0 at pci3 dev 0 function 2: vendor 197b product 2391 (rev. 0x30)
  97. sdhc0: interrupting at irq 10
  98. sdhc0: SDHC 2.0, rev 173, SDMA, 50000 kHz, 1.8V 3.3V, 512 byte blocks
  99. sdmmc0 at sdhc0 slot 0
  100. ppb3 at pci0 dev 28 function 3: vendor 8086 product 1e16 (rev. 0xc4)
  101. ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/
  102. ppb3: link is x1 @ 2.5GT/s
  103. pci4 at ppb3 bus 36
  104. pci4: i/o space, memory space enabled, rd/line, wr/inv ok
  105. vendor 14e4 product 4359 (miscellaneous network) at pci4 dev 0 function 0 not config
  106. ehci1 at pci0 dev 29 function 0: vendor 8086 product 1e26 (rev. 0x04)
  107. ehci1: interrupting at irq 10
  108. ehci1: EHCI version 1.0
  109. usb1 at ehci1: USB revision 2.0
  110. ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 1e59 (rev. 0x04)
  111. timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
  112. ichlpcib0: 24-bit timer
  113. tco0 at ichlpcib0: TCO (watchdog) timer configured.
  114. tco0: Min/Max interval 1/367 seconds
  115. ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 1e03 (rev. 0x04)
  116. ahcisata0: interrupting at irq 10
  117. ahcisata0: 64-bit DMA
  118. ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65<SXS,EMS,PSC,SSC,PMD
  119. atabus0 at ahcisata0 channel 0
  120. atabus1 at ahcisata0 channel 1
  121. atabus2 at ahcisata0 channel 3
  122. atabus3 at ahcisata0 channel 4
  123. atabus4 at ahcisata0 channel 5
  124. isa0 at ichlpcib0
  125. lpt0 at isa0 port 0x378-0x37b irq 7
  126. tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
  127. pckbc0 at isa0 port 0x60-0x64
  128. pckbd0 at pckbc0 (kbd slot)
  129. pckbc0: using irq 1 for kbd slot
  130. wskbd0 at pckbd0: console keyboard, using wsdisplay0
  131. pms0 at pckbc0 (aux slot)
  132. pms0: Synaptics touchpad version 7.5
  133. pms0: Extended W mode, Palm detect, Multi-finger Report, Multi-finger
  134. pckbc0: using irq 12 for aux slot
  135. wsmouse0 at pms0 mux 0
  136. attimer0 at isa0 port 0x40-0x43
  137. pcppi0 at isa0 port 0x61
  138. spkr1 at pcppi0: PC Speaker
  139. midi0 at pcppi0: PC speaker
  140. sysbeep0 at pcppi0
  141. attimer0: attached to pcppi0
  142. coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
  143. DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
  144. timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
  145. timecounter: Timecounter "TSC" frequency 2494461920 Hz quality 3000
  146. IPsec: Initialized Security Association Processing.
  147. uhub0 at usb0: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00,
  148. uhub0: 2 ports with 2 removable, self powered
  149. uhub1 at usb1: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00,
  150. uhub1: 2 ports with 2 removable, self powered
  151. ahcisata0 port 0: device present, speed: 6.0Gb/s
  152. ahcisata0 port 1: device present, speed: 1.5Gb/s
  153. drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
  154. wd0 at atabus0 drive 0
  155. wd0: <ADATA SP600>
  156. wd0: drive supports 16-sector PIO transfers, LBA48 addressing
  157. wd0: 30533 MB, 62037 cyl, 16 head, 63 sec, 512 bytes/sect x 62533296 sectors
  158. wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
  159. wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (usin
  160. atapibus0 at atabus1: 1 targets
  161. cd0 at atapibus0 drive 0: <hp DVD A DS8A8SH, 6A6238055388, KH62> cdrom removab
  162. cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
  163. cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (usin
  164. uhub2 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00
  165. uhub2: single transaction translator
  166. uhub3 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x24), class 9/0, rev 2.00
  167. uhub3: single transaction translator
  168. uhub2: 6 ports with 6 removable, self powered
  169. uhub3: 6 ports with 6 removable, self powered
  170. ugen0 at uhub3 port 1
  171. ugen0: vendor 138a (0x138a) product 003d (0x3d), rev 1.10/1.04, addr 3
  172. uvideo0 at uhub3 port 3 configuration 1 interface 0: Chicony Electronics Co., Ltd. (
  173. video0 at uvideo0: Chicony Electronics Co., Ltd. (0x4f2) HP HD Webcam [Fixed] (0xb23
  174. pad0: outputs: 44100Hz, 16-bit, stereo
  175. audio1 at pad0: half duplex, playback, capture, mmap
  176. pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequenc
  177. pad0: Latency: 139 milliseconds
  178. spkr2 at audio1: PC Speaker (synthesized)
  179. WARNING: 5 errors while detecting hardware; check system log.
  180. boot device: wd0
  181. root on wd0a dumps on wd0b
  182. root file system type: ffs
  183. kern.module.path=/stand/amd64/8.0/modules
  184. wsdisplay0: screen 1 added (default, vt100 emulation)
  185. wsdisplay0: screen 2 added (default, vt100 emulation)
  186. wsdisplay0: screen 3 added (default, vt100 emulation)
  187. wsdisplay0: screen 4 added (default, vt100 emulation)
Advertisement
Add Comment
Please, Sign In to add comment