Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
- [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
- [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
- [ 1.000000] The Regents of the University of California. All rights reserved.
- [ 1.000000] NetBSD 9.2 (MYKERNEL) #1: Fri Jul 9 11:40:41 EDT 2021
- [ 1.000000] root@localhost:/usr/obj/sys/arch/sparc64/compile/MYKERNEL
- [ 1.000000] total memory = 1024 MB
- [ 1.000000] avail memory = 986 MB
- [ 1.000000] timecounter: Timecounters tick every 10.000 msec
- [ 1.000000] Kernelized RAIDframe activated
- [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
- [ 1.000000] mainbus0 (root): SUNW,Sun-Blade-100 (Sun Blade 150): hostid 0
- [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 550 MHz, CPU id 0
- [ 1.000000] cpu0: manuf 17, impl 13, mask 33
- [ 1.000000] cpu0: system tick frequency 5.555 MHz
- [ 1.000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l)
- [ 1.000000] psycho0 at mainbus0
- [ 1.000000] psycho0: pci108e,a001: impl 0, version 0: ign 7c0 bus range 0 to 1; PCI bus 0
- [ 1.000000] pci0 at psycho0
- [ 1.000000] pci0: i/o space, memory space enabled
- [ 1.000000] ebus0 at pci0 dev 12 function 0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
- [ 1.000000] flashprom at ebus0 addr 0-fffff not configured
- [ 1.000000] clock0 at ebus0 addr 0-1fff: mk48t59
- [ 1.000000] autoconfiguration error: ebus_attach: idprom: incomplete
- [ 1.000000] ebus1 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
- [ 1.000000] dma at ebus1 addr 0-ffff ipl 2a not configured
- [ 1.000000] power at ebus1 addr 800-82f ipl 20 not configured
- [ 1.000000] com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, working fifo
- [ 1.000000] com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, working fifo
- [ 1.000000] alipm0 at pci0 dev 3 function 0: 223KHz clock
- [ 1.000000] iic0 at alipm0: I2C bus
- [ 1.000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature sensor: id. 0x41, rev. 0x34
- [ 1.000000] card-reader at iic0 addr 0x20 not configured
- [ 1.000000] spdmem0 at iic0 addr 0x50
- [ 1.000000] spdmem0: SDRAM, data ECC, 256MB, 133MHz (PC-133)
- [ 1.000000] spdmem0: 13 rows, 10 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
- [ 1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45
- [ 1.000000] spdmem0: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
- [ 1.000000] spdmem1 at iic0 addr 0x51
- [ 1.000000] spdmem1: SDRAM, data ECC, 256MB, 133MHz (PC-133)
- [ 1.000000] spdmem1: 13 rows, 10 cols, 1 banks, 4 banks/chip, 7.5ns cycle time
- [ 1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-44
- [ 1.000000] spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
- [ 1.000000] spdmem2 at iic0 addr 0x52
- [ 1.000000] spdmem2: SDRAM, data ECC, 512MB, 133MHz (PC-133)
- [ 1.000000] spdmem2: 13 rows, 10 cols, 2 banks, 4 banks/chip, 7.5ns cycle time
- [ 1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 3-20-20-45
- [ 1.000000] spdmem2: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing)
- [ 1.000000] gem0 at pci0 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
- [ 1.000000] gem0: interrupting at ivec 3006
- [ 1.000000] bmtphy0 at gem0 phy 1: BCM5221 10/100 media interface, rev. 4
- [ 1.000000] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- [ 1.000000] gem0: Ethernet address 00:00:00:00:00:00, 2KB RX fifo, 2KB TX fifo
- [ 1.000000] fwohci0 at pci0 dev 12 function 2: Sun Microsystems FireWire Controller (rev. 0x01)
- [ 1.000000] fwohci0: interrupting at ivec 1c
- [ 1.000000] fwohci0: OHCI version 1.0 (ROM=0)
- [ 1.000000] fwohci0: No. of Isochronous channels is 4.
- [ 1.000000] fwohci0: EUI64 00:00:00:ff:fe:00:00:00
- [ 1.000000] fwohci0: Phy 1394a available S400, 2 ports.
- [ 1.000000] fwohci0: Link S400, max_rec 2048 bytes.
- [ 1.000000] ieee1394if0 at fwohci0: IEEE1394 bus
- [ 1.000000] fwip0 at ieee1394if0: IP over IEEE1394
- [ 1.000000] fwohci0: Initiate bus reset
- [ 1.000000] ohci0 at pci0 dev 12 function 3: Sun Microsystems USB Controller (rev. 0x01)
- [ 1.000000] ohci0: interrupting at ivec 24
- [ 1.000000] ohci0: OHCI version 1.0, legacy support
- [ 1.000000] usb0 at ohci0: USB revision 1.0
- [ 1.000000] autri0 at pci0 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x01)
- [ 1.000000] autri0: interrupting at ivec 23
- [ 1.000000] autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
- [ 1.000000] audio0 at autri0: playback, capture, full duplex, independent
- [ 1.000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
- [ 1.000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
- [ 1.000000] spkr0 at audio0: PC Speaker (synthesized)
- [ 1.000000] wsbell at spkr0 not configured
- [ 1.000000] midi0 at autri0: 4DWAVE MIDI UART
- [ 1.000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
- [ 1.000000] aceride0: bus-master DMA support present
- [ 1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
- [ 1.000000] aceride0: primary channel configured to native-PCI mode
- [ 1.000000] aceride0: using ivec 180c for native-PCI interrupt
- [ 1.000000] atabus0 at aceride0 channel 0
- [ 1.000000] aceride0: secondary channel configured to native-PCI mode
- [ 1.000000] atabus1 at aceride0 channel 1
- [ 1.000000] ppb0 at pci0 dev 5 function 0: Intel S21152BB PCI-PCI Bridge (rev. 0x00)
- [ 1.000000] pci1 at ppb0 bus 1
- [ 1.000000] pci1: i/o space, memory space enabled
- [ 1.000000] radeonfb0 at pci1 dev 2 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
- [ 1.000000] trying to read disabled BIOS...
- [ 1.000000] radeonfb0: No video BIOS, using default clocks
- [ 1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
- [ 1.000000] radeonfb0: 64 MB aperture at 0x08000000, 64 KB registers at 0x03000000
- [ 1.000000] radeonfb0: display 0: initial virtual resolution 640x480 at 8 bpp
- [ 1.000000] radeonfb0: using 32 MB per display
- [ 1.000000] radeonfb0: port 0: physical 1024x768 60Hz
- [ 1.000000] radeonfb0: port 1: physical 1024x768 60Hz
- [ 1.000000] wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
- [ 1.000000] wsmux1: connecting to wsdisplay0
- [ 1.000000] wsdisplay0: screen 1-3 added (fb, vt100 emulation)
- [ 1.000000] drm at radeonfb0 not configured
- [ 1.000000] pcons at mainbus0 not configured
- [ 1.000000] fwohci0: BUS reset
- [ 1.000000] fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
- [ 1.000000] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
- [ 1.000000] ieee1394if0: bus manager 0
- [ 1.000000] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
- [ 1.000004] timecounter: Timecounter "tick-counter" frequency 550000000 Hz quality 100
- [ 1.000004] timecounter: Timecounter "stick-counter" frequency 5555555 Hz quality 200
- [ 1.000031] No counter-timer -- using STICK at 5.555MHz as system clock.
- [ 1.050015] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
- [ 1.050015] uhub0: 4 ports with 4 removable, self powered
- [ 1.320008] atapibus0 at atabus0: 2 targets
- [ 1.330010] cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8589, , 8Z14> cdrom removable
- [ 1.330010] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
- [ 1.340009] wd0 at atabus0 drive 0
- [ 1.340009] wd0: <ST380011A>
- [ 1.340009] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
- [ 1.340009] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
- [ 1.350008] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
- [ 1.350008] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
- [ 1.350008] cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
- [ 3.309990] uhidev0 at uhub0 port 1 configuration 1 interface 0
- [ 3.309990] uhidev0: vendor 0430 (0x430) product 0005 (0x05), rev 1.10/2.00, addr 2, iclass 3/1
- [ 3.319990] ukbd0 at uhidev0
- [ 3.729983] wskbd1 at ukbd0: console keyboard, using wsdisplay0
- [ 5.259968] uhidev1 at uhub0 port 3 configuration 1 interface 0
- [ 5.269978] uhidev1: vendor 0430 (0x430) product 0100 (0x100), rev 2.00/1.07, addr 3, iclass 3/1
- [ 5.279970] ums0 at uhidev1: 3 buttons
- [ 5.279970] wsmouse0 at ums0 mux 0
- [ 5.289974] WARNING: 1 error while detecting hardware; check system log.
- [ 5.289974] root on wd0a dumps on wd0b
- [ 5.299970] root file system type: ffs
- [ 5.299970] kern.module.path=/stand/sparc64/9.2/modules
- [ 7.859942] autoconfiguration error: aceride0:0:1: lost interrupt
- [ 7.859942] type: atapi tc_bcount: 32 tc_skip: 0
- [ 7.859942] autoconfiguration error: aceride0:0:1: bus-master DMA error: missing interrupt, status=0x61
- [ 7.859942] cd0: autoconfiguration error: transfer error, downgrading to Ultra-DMA mode 3
- [ 7.859942] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
- [ 7.859942] cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
- [ 10.169919] autoconfiguration error: aceride0:0:1: lost interrupt
- [ 10.169919] type: atapi tc_bcount: 32 tc_skip: 0
- [ 10.169919] autoconfiguration error: aceride0:0:1: bus-master DMA error: missing interrupt, status=0x61
- [ 10.169919] cd0: autoconfiguration error: transfer error, downgrading to Ultra-DMA mode 2
- [ 10.169919] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
- [ 10.169919] cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
- [ 12.479896] autoconfiguration error: aceride0:0:1: lost interrupt
- [ 12.479896] type: atapi tc_bcount: 32 tc_skip: 0
- [ 12.479896] autoconfiguration error: aceride0:0:1: bus-master DMA error: missing interrupt, status=0x61
- [ 12.479896] cd0: autoconfiguration error: transfer error, downgrading to Ultra-DMA mode 1
- [ 12.479896] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
- [ 12.479896] cd0(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 1 (using DMA)
- [ 14.789873] autoconfiguration error: aceride0:0:1: lost interrupt
- [ 14.789873] type: atapi tc_bcount: 32 tc_skip: 0
- [ 14.789873] autoconfiguration error: aceride0:0:1: bus-master DMA error: missing interrupt, status=0x61
- [ 14.789873] cd0: autoconfiguration error: transfer error, downgrading to PIO mode 4
- [ 14.789873] wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
- [ 14.789873] cd0(aceride0:0:1): using PIO mode 4
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement