HiKey successfull flash

main:     ******** Fastboot for Kirin *****************
main:   ******** Build Date: Apr  8 2017, 15:34:11 **
main: ******** Fastboot start at 1721 ms **********

main: print soc_id computed in xloader phase, is below:
main: 00000000  main: 00000000  main: 00000000  main: 00000000  main:
main: 00000000  main: 00000000  main: 00000000  main: 00000000  main:
led_alwayson: can't get dtb operators
bbox: bbox_register_module_ops success.
bfm: : >>>>>enter bfm_init
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
clock: PLL Stat
clock: PLL2 ctrl0=0x04909604,ctrl1=0x02000000
clock: PLL2 acpu en_stat:0x00000008, acpu gt_stat:0x00040000
clock: PLL2 final en_stat:0x00100000, final gt_stat:0x00020000
clock: PLL3 ctrl0=0x04904005,ctrl1=0x07000000
clock: PLL3 acpu en_stat:0x00000000, acpu gt_stat:0x00000000
clock: PLL3 final en_stat:0x00200000, final gt_stat:0x00040000
clock: clock init OK
ufs: ufs start on platform[36600110]ufs: ufs current mode: 0x00000011
ufs: ufs current gear: 0x00000003
ufs: ufs mphy reg 0x4A = 0x00000000
ufs: bUD0BaseOffset: 0x00000010, bUDConfigPLength: 0x00000010
ufs: UFS device manufacturerid = 0x00000198
ufs: UFS device: T******
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000001, mntnStageCode is 27
bfm: : <<<<<exit set_boot_stage.
storage: emmc_ops invalid
storage: storage type is UFS
bfm: : bfm system is disabled!
storage: emmc_init: BL2_STAGE_EMMC_OK is 33554435!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02000003, mntnStageCode is 29
bfm: : <<<<<exit set_boot_stage.
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010001, mntnStageCode is 30
bfm: : <<<<<exit set_boot_stage.
ddr: current logic version is lpddr4 verison !!!
ddr: ddr size is 3072MB
bbox: register modid [0x81fff200]
bbox: register exception succeed.
bbox: register modid [0x81fff202]
bbox: register exception succeed.
bbox: register modid [0x81fff20b]
bbox: register exception succeed.
watchdog: Enable watchdog start
boardid: [BDID]boardid: 5301
gpio: hikey960_gpio_init: GPIO 46 202 206 ouput low, GPIO 219 pullup.
load_kernel: register_update_dt_ops for usb!
usb: [USBERR]random_serial: fastboot serial: 8845562450000000
secureboot: Enter secboot_init: set pll efuse flag!
secureboot: pll efuse flag has been succ set!bbox: register modid [0x81fff20a]
bbox: register exception succeed.
secureboot: SECBOOT_DEV_INFO_DADDR = 0x1d7fff00, SECBOOT_DEV_INFO_SIZE = 0x00000040!
dtimage: number of dtb = 1
dtimage: =========uncompress_dtb_addr=[0x16f00000],====vrl_addr=[0x1b0e64e0]====
dtimage: [device_tree_get_dtb_entry:215] Verify Not Exist
dtimage: fdt_init success!
dtimage: -----can not find hisilicon,fastboot node by compatible
dtimage: -----can not find hisilicon,fastboot node by compatible
load_kernel: register_update_dt_ops for led!
reboot_reason: scsysstat_value is 0x00000000
pmu: can not find fastboot,hisi-pmic-mntn node1
pmu: pmu_property_read_u32 fastboot,hisi-pmic-mntn, hisilicon,data-width, failed
pmu: pmu_mntn_record_dts_parse failed!
bbox: save_tempbuffer_to_loop_area():727:storage_read fail[-1]
reboot_reason: reboot_reason is AP_S_COLDBOOT
reboot_reason: clear_reset_source in!
reboot_reason: tmp =0x0effcc70
dtimage: -----can not find fastboot,charger node by compatible
power: get_chargerIC_type: getU32byCompatible fastboot,charger, hw_charger_type failed!
dtimage: -----can not find fastboot,coul node by compatible
power: get_coul_type: get  coul_type failed!
power: get  coul_type failed!
power: hi6421v500 register coulometer ops fail!
dtimage: -----can not find huawei,hisi_bci_battery node by compatible
no_module: [hi6523_get_config_info]: can't get battery board type
dtimage: -----can not find fastboot,charger node by compatible
no_module: get hi6523 i2c reg num fail!
dtimage: -----can not find fastboot,charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get ichrg_pre_limit fail
dtimage: -----can not find huawei,hi6523_charger node by compatible
no_module: [hi6523_start_charging_by_init_params]: get reg fail
dtimage: -----can not find fastboot,buckboost node by compatible
max77813: get_buckboost_type: getU32byCompatible fastboot,buckboost, hw_buckboost_type failed!
max77813: get dts buckboost type fail!
cpu_buck: pmu type3 not registered
cpu_buck: Bad cpu buck info:1
bbox: Could not find path /rdr
bbox: Could not find status property.
mntn: tele_mntn_stat_point_init: can not bbox_ops !
dtimage: -----can not find hisilicon,fastboot node by compatible
mntn: [tele_mntn_m3_wdt_config]: getU32byCompatible(hisilicon,fastboot, lpm3-board-type) error!
mntn: mntn init
mntndump: enable_reserved_ddr_dts: Could not find path /reserved-memory/mntndump
mntndump: mntn_dump_init failed
mntndump: get_mntn_dump_addr:mid[2] is not init
mntn: kernel dump is not available
mntn: reboot_type is 0
mntn:
no need to dump_mem...
mntn: enter [registe_pstore_ramoops_dump]
mntndump: get_mntn_dump_addr:mid[5] is not init
mntn: no mdump_pstore info
mntn: M3_RDR_SYS_CONTEXT_BASE_ADDR is null
uart_cfg: [MNTN]:Could not find node.
uart_cfg: set_default_uart_cfg: uart_from_dts_read failed!
uart_cfg: module_idx 2, uart_no 6
uart_cfg: odule_idx 11, uart_no 15
uart_cfg: module_idx 2, uart_no 6
uart_cfg: getU32byCompatible(hisilicon,fastboot, uart-board-type) error!
uart_cfg: boardid: 5301 use uart port: 6
pasr: in pasr_init-43 ...ddr: current logic version is lpddr4 verison !!!
ddr: current logic version is lpddr4 verison !!!
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_detect_type: huawei,lcd_panel_type: get detect_type fail
display: lcd:no lcd detect_type
no_module: [LOGO] get_logo_buffer_from_dtsi: Could not find path /reserved-memory/logo-buffer.
no_module: [LOGO] logo_init: logo init failed!!! used the default fb addr.
display: [display]jdi_otm2503b_panel_init: lcd type is not JDI_OTM2503B_5P5_LCD.
display: [display]jdi_nt35696_panel_init: lcd type is not JDI_NT35696_5P5_LCD.
dtimage: -----can not find huawei,lcd_panel_type node by compatible
display: [display]get_dts_value: can not get huawei,lcd_panel_type, bl_bus_id=4!
dtimage: -----can not find ti,lm36923 node by compatible
display: [display]get_dts_value: can not get ti,lm36923, support=0!
display: get lm36923_support failed!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010002, mntnStageCode is 31
bfm: : <<<<<exit set_boot_stage.
Audio_codec: [audio]:Could not find "hisilicon,codec-controller" node.
load_teeos: can not find fb node fingerprint
load_teeos: failed to find fb node ese_config
display: [display]hisi_get_disp_info: hisifb_data is NULL pointer, return!
bfm: : >>>>>enter set_boot_stage
bfm: : bootStageCode is 0x02010003, mntnStageCode is 32
bfm: : <<<<<exit set_boot_stage.
preboot: GPIO_068_SEL connect GND enter fastboot mode.
watchdog: Disable watchdog start
bfm: : [disable_boot_fail_system] boot_fail_system state is 0
rescue: ^^^^^^^^^[rescue_init] ok !
usbloader: bootmode is 4
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usb: [USBFINFO]USB RESET
usb: [USBFINFO]USB CONNDONE, highspeed
usbloader: usb: online (highspeed)
usb: [USBFINFO]usb enum done
usbloader: usb_rx_cmd_complete() 'getvar:partition-type:ptable', size is 0x0000001c
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00004600', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:ptable', size is 0x0000000c
secureboot: SecBoot_GetVrlOffset: get ptn offset error!
secureboot: SecBoot_GetVrlOffset: get ptn offset error!
usbloader: [auto_resize]:start amend ptable
usbloader: [auto_resize]:Success to resize ptable image
usbloader: usb_rx_cmd_complete() 'getvar:partition-type:fastboot', size is 0x0000001e
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:001630dc', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:fastboot', size is 0x0000000e
usbloader: writing 1454300 bytes to 'fastboot'...
usbloader:
partition 'fastboot' updated
usbloader:  - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:partition-type:nvme', size is 0x0000001a
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:00020000', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:nvme', size is 0x0000000a
usbloader: writing 131072 bytes to 'nvme'...
nve: [nvme_updata]partition 0 is not valid!
usbloader: update nvme failed!
usbloader:
partition 'nvme' updated
usbloader:  - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:partition-type:boot', size is 0x0000001a
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:04000000', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:boot', size is 0x0000000a
nve: [NVE]NV items is not defined.
seclock: hisi_secboot_get_lockstate: nve_direct_access read error
usbloader: writing 67108864 bytes to 'boot'...
usbloader:
partition 'boot' updated
usbloader:  - OKAY
reboot_reason: set_reboot_type is 0x00000013.
usbloader: usb_rx_cmd_complete() 'getvar:partition-type:system', size is 0x0000001c
usbloader: usb_rx_cmd_complete() 'getvar:max-download-size', size is 0x00000018
usbloader: usb_rx_cmd_complete() 'download:1b04d064', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
nve: [NVE]NV items is not defined.
seclock: hisi_secboot_get_lockstate: nve_direct_access read error
usbloader: writing 453300324 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
nve: [NVE]NV items is not defined.
no_module: hisi_write_vmode_nve,write verify mode nve fail!
usbloader: failed to write vmode nv
storage: storage_erase: partition system
usbloader: partition 'system' erased before flash
usbloader:
partition 'system' updated
usbloader:  - OKAY
usbloader: usb_rx_cmd_complete() 'download:1c1ff064', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
nve: [NVE]NV items is not defined.
seclock: hisi_secboot_get_lockstate: nve_direct_access read error
usbloader: writing 471855204 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
usbloader:
partition 'system' updated
usbloader:  - OKAY
usbloader: usb_rx_cmd_complete() 'download:1a8c90d0', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
nve: [NVE]NV items is not defined.
seclock: hisi_secboot_get_lockstate: nve_direct_access read error
usbloader: writing 445419728 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
usbloader:
partition 'system' updated
usbloader:  - OKAY
usbloader: usb_rx_cmd_complete() 'download:07ce80a0', size is 0x00000011
usbloader: usb_rx_cmd_complete() 'flash:system', size is 0x0000000c
nve: [NVE]NV items is not defined.
seclock: hisi_secboot_get_lockstate: nve_direct_access read error
usbloader: writing 130973856 bytes to 'system'...
usbloader: partition 'system' image is in sparse format
usbloader:
partition 'system' updated
usbloader:  - OKAY
hikey960 boarid:5301 xloader use UART6
scsysstat_value[0].
clear reset source
last_keypoint0,reboot_type0
secdbg not DCU.
SecDbgVer exit