API tools faq
paste
Advertisement
CGarces

mk802ii debian

CGarces
Mar 18th, 2014
414
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.48 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Linux version 3.0.62+ (danish@danish-VirtualBox) (gcc version 4.7.2 (Debian 4.7.2-4) ) #2 PREEMPT Mon Mar 25 16:39:04 CST 2013
  3. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: sun4i
  6. [ 0.000000] Memory cut off:
  7. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  8. [ 0.000000] Ignoring unrecognised tag 0x00000000
  9. [ 0.000000] Memory Reserved:
  10. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  11. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  12. [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB)
  13. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  14. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  15. [ 0.000000] chip-id: A10 (AW1623 revision C)
  16. [ 0.000000] On node 0 totalpages: 245760
  17. [ 0.000000] free_area_init_node: node 0, pgdat c07f3a10, node_mem_map c08ba000
  18. [ 0.000000] Normal zone: 1280 pages used for memmap
  19. [ 0.000000] Normal zone: 0 pages reserved
  20. [ 0.000000] Normal zone: 146176 pages, LIFO batch:31
  21. [ 0.000000] HighMem zone: 768 pages used for memmap
  22. [ 0.000000] HighMem zone: 97536 pages, LIFO batch:31
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243712
  26. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 elevator=noop rootwait panic=10
  27. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  30. [ 0.000000] Memory: 448MB 512MB = 960MB total
  31. [ 0.000000] Memory: 834444k/834444k available, 148596k reserved, 393216K highmem
  32. [ 0.000000] Virtual kernel memory layout:
  33. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  34. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  35. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  36. [ 0.000000] vmalloc : 0xe8800000 - 0xf0000000 ( 120 MB)
  37. [ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
  38. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  39. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  40. [ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
  41. [ 0.000000] .text : 0xc0030000 - 0xc07af52c (7678 kB)
  42. [ 0.000000] .data : 0xc07b0000 - 0xc07fcfd0 ( 308 kB)
  43. [ 0.000000] .bss : 0xc07fcff4 - 0xc08b9718 ( 754 kB)
  44. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  45. [ 0.000000] NR_IRQS:128 nr_irqs:128 128
  46. [ 0.000000] timer0: Periodic Mode
  47. [ 0.000000] Console: colour dummy device 80x30
  48. [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  49. [ 0.040000] pid_max: default: 32768 minimum: 301
  50. [ 0.040000] Mount-cache hash table entries: 512
  51. [ 0.050000] Initializing cgroup subsys cpuacct
  52. [ 0.050000] Initializing cgroup subsys devices
  53. [ 0.050000] Initializing cgroup subsys freezer
  54. [ 0.060000] Initializing cgroup subsys blkio
  55. [ 0.060000] CPU: Testing write buffer coherency: ok
  56. [ 0.060000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  57. [ 0.070000] devtmpfs: initialized
  58. [ 0.070000] print_constraints: dummy:
  59. [ 0.080000] NET: Registered protocol family 16
  60. [ 0.080000] hw-breakpoint: debug architecture 0x4 unsupported.
  61. [ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  62. [ 0.090000] Initialize DMAC OK
  63. [ 0.090000] Init eGon pin module V2.0
  64. [ 0.100000] bio: create slab <bio-0> at 0
  65. [ 0.100000] SCSI subsystem initialized
  66. [ 0.110000] libata version 3.00 loaded.
  67. [ 0.110000] usbcore: registered new interface driver usbfs
  68. [ 0.110000] usbcore: registered new interface driver hub
  69. [ 0.120000] usbcore: registered new device driver usb
  70. [ 0.120000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  71. [ 0.130000] Bluetooth: Core ver 2.16
  72. [ 0.130000] NET: Registered protocol family 31
  73. [ 0.130000] Bluetooth: HCI device and connection manager initialized
  74. [ 0.140000] Bluetooth: HCI socket layer initialized
  75. [ 0.140000] Bluetooth: L2CAP socket layer initialized
  76. [ 0.150000] Bluetooth: SCO socket layer initialized
  77. [ 0.150000] Switching to clocksource aw 64bits couter
  78. [ 0.150000] FS-Cache: Loaded
  79. [ 0.160000] Switched to NOHz mode on CPU #0
  80. [ 0.160000] cfg80211: Calling CRDA to update world regulatory domain
  81. [ 0.160000] CacheFiles: Loaded
  82. [ 0.160000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  83. [ 0.170000] [sw_hcd0]: usb host driver initialize........
  84. [ 0.170000] [sw_hcd0]: open_usb_clock
  85. [ 0.190000] [sw_hcd0]: host_init_state = 1
  86. [ 0.200000] [sw_hcd0]: platform is usb host
  87. [ 0.200000] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  88. [ 0.210000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  89. [ 0.220000] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  90. [ 0.220000] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  91. [ 0.230000] hub 1-0:1.0: USB hub found
  92. [ 0.230000] hub 1-0:1.0: 1 port detected
  93. [ 0.240000] wrn: hcd is not enable, need not start hcd
  94. [ 0.240000] [sw_hcd0]: sw_usb_host0_disable start
  95. [ 0.240000] -------sw_hcd0_soft_disconnect---------
  96. [ 0.240000] [sw_hcd_host0]: Set USB Power OFF
  97. [ 0.240000] wrn: hcd is not enable, need not stop hcd
  98. [ 0.250000] [sw_hcd0]: close_usb_clock
  99. [ 0.260000] [sw_hcd0]: sw_usb_host0_disable end
  100. [ 0.260000] [sw_udc]: udc_init: version 20080411
  101. [ 0.260000] NET: Registered protocol family 2
  102. [ 0.270000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  103. [ 0.270000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  104. [ 0.280000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  105. [ 0.290000] TCP: Hash tables configured (established 131072 bind 65536)
  106. [ 0.290000] TCP reno registered
  107. [ 0.300000] UDP hash table entries: 512 (order: 1, 8192 bytes)
  108. [ 0.300000] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  109. [ 0.310000] NET: Registered protocol family 1
  110. [ 0.310000] RPC: Registered named UNIX socket transport module.
  111. [ 0.310000] RPC: Registered udp transport module.
  112. [ 0.320000] RPC: Registered tcp transport module.
  113. [ 0.320000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  114. [ 0.330000] PMU: registered new PMU device of type 0
  115. [ 0.330000] audit: initializing netlink socket (disabled)
  116. [ 0.340000] type=2000 audit(0.339:1): initialized
  117. [ 0.340000] highmem bounce pool size: 64 pages
  118. [ 0.350000] VFS: Disk quotas dquot_6.5.2
  119. [ 0.350000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  120. [ 0.360000] NTFS driver 2.1.30 [Flags: R/W].
  121. [ 0.360000] fuse init (API version 7.16)
  122. [ 0.370000] msgmni has been set to 861
  123. [ 0.370000] alg: No test for stdrng (krng)
  124. [ 0.380000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  125. [ 0.380000] io scheduler noop registered (default)
  126. [ 0.390000] io scheduler deadline registered
  127. [ 0.390000] io scheduler cfq registered
  128. [ 0.390000] sunxi disp driver loaded (/dev/disp api 1.0)
  129. [ 0.400000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  130. [ 0.420000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  131. [ 1.060000] console [ttyS0] enabled
  132. [ 1.070000] [uart]: used uart info.: 0x05
  133. [ 1.080000] serial probe 0 irq 1 mapbase 0x01c28000
  134. [ 1.100000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  135. [ 1.120000] serial probe 2 irq 3 mapbase 0x01c28800
  136. [ 1.150000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  137. [ 1.160000] G2D: drv_g2d_init
  138. [ 1.160000] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000
  139. [ 1.170000] G2D: head:c9000000,tail:ca000000
  140. [ 1.180000] G2D: Module initialized.major:251
  141. [ 1.190000] brd: module loaded
  142. [ 1.190000] loop: module loaded
  143. [ 1.200000] [NAND]nand driver, init.
  144. [ 1.210000] cmu_clk is 408
  145. [ 1.210000] nand clk init end
  146. [ 1.220000] offset 0xc: 0x6140
  147. [ 1.220000] offset 0x14: 0x8200000a
  148. [ 1.230000] [NAND] nand gpio_request
  149. [ 1.230000] [NAND] nand driver version: 0x2 0x9
  150. [ 1.240000] nand interrupte register ok
  151. [ 1.250000] ret of NFC_ChangMode is 0
  152. [ 1.250000] dma_hdle is 0
  153. [ 1.260000] dma_hdle is 10000008
  154. [ 1.260000] cmu_clk is 408
  155. [ 1.270000] nand clk init end
  156. [ 1.270000] offset 0xc: 0x6140
  157. [ 1.280000] offset 0x14: 0x82000006
  158. [ 1.330000] Dev nand: part 1, start 32768, size 32768
  159. [ 1.340000] Dev nand: part 2, start 65536, size 32768
  160. [ 1.340000] Dev nand: part 3, start 98304, size 65536
  161. [ 1.350000] Dev nand: part 4, start 163840, size 1048576
  162. [ 1.360000] Dev nand: part 5, start 1212416, size 3145728
  163. [ 1.370000] Dev nand: part 6, start 4358144, size 32768
  164. [ 1.380000] Dev nand: part 7, start 4390912, size 65536
  165. [ 1.390000] Dev nand: part 8, start 4456448, size 262144
  166. [ 1.400000] Dev nand: part 9, start 4718592, size 32768
  167. [ 1.410000] Dev nand: part 10, start 4751360, size 1048576
  168. [ 1.420000] Dev nand: part 11, start 5799936, size 1982464
  169. [ 1.430000] nand: nand1 nand2 nand3 nand4 nand5 nand6 nand7 nand8 nand9 nand10 nand11
  170. [ 1.450000] benn: nand probe enter
  171. [ 1.450000] [NAND]nand driver, ok.
  172. [ 1.460000] emac driver is disabled
  173. [ 1.460000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [ 1.480000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  175. [ 1.490000] [sw-ehci1]: open clock
  176. [ 1.510000] [sw-ehci1]: Set USB Power ON
  177. [ 1.520000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  178. [ 1.530000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  179. [ 1.550000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  180. [ 1.580000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  181. [ 1.580000] ehci_irq: port change detect
  182. [ 1.590000] hub 2-0:1.0: USB hub found
  183. [ 1.600000] hub 2-0:1.0: 1 port detected
  184. [ 1.610000] [sw-ohci1]: open clock
  185. [ 1.630000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  186. [ 1.640000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  187. [ 1.660000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  188. [ 1.730000] hub 3-0:1.0: USB hub found
  189. [ 1.740000] hub 3-0:1.0: 1 port detected
  190. [ 1.740000] [sw-ehci2]: open clock
  191. [ 1.770000] [sw-ehci2]: Set USB Power ON
  192. [ 1.770000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  193. [ 1.790000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  194. [ 1.800000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  195. [ 1.930000] usb 2-1: new high speed USB device number 2 using sw-ehci
  196. [ 1.960000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  197. [ 1.960000] ehci_irq: port change detect
  198. [ 1.970000] hub 4-0:1.0: USB hub found
  199. [ 1.980000] hub 4-0:1.0: 1 port detected
  200. [ 1.990000] [sw-ohci2]: open clock
  201. [ 2.010000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  202. [ 2.020000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  203. [ 2.040000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  204. [ 2.110000] hub 5-0:1.0: USB hub found
  205. [ 2.120000] hub 5-0:1.0: 1 port detected
  206. [ 2.120000] Initializing USB Mass Storage driver...
  207. [ 2.130000] usbcore: registered new interface driver usb-storage
  208. [ 2.140000] USB Mass Storage support registered.
  209. [ 2.150000] usbcore: registered new interface driver ums-alauda
  210. [ 2.160000] usbcore: registered new interface driver ums-cypress
  211. [ 2.170000] hub 2-1:1.0: USB hub found
  212. [ 2.180000] usbcore: registered new interface driver ums-datafab
  213. [ 2.190000] usbcore: registered new interface driver ums_eneub6250
  214. [ 2.200000] hub 2-1:1.0: 4 ports detected
  215. [ 2.210000] usbcore: registered new interface driver ums-freecom
  216. [ 2.220000] usbcore: registered new interface driver ums-isd200
  217. [ 2.230000] usbcore: registered new interface driver ums-jumpshot
  218. [ 2.240000] usbcore: registered new interface driver ums-karma
  219. [ 2.250000] usbcore: registered new interface driver ums-onetouch
  220. [ 2.260000] usbcore: registered new interface driver ums-realtek
  221. [ 2.280000] usbcore: registered new interface driver ums-sddr09
  222. [ 2.290000] usbcore: registered new interface driver ums-sddr55
  223. [ 2.300000] usbcore: registered new interface driver ums-usbat
  224. [ 2.310000] mousedev: PS/2 mouse device common for all mice
  225. [ 2.320000] sunxi RTC version 0.1
  226. [ 2.320000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380248073
  227. [ 2.340000] [RTC] ERR: Set LOSC to external failed!!!
  228. [ 2.350000] [RTC] WARNING: Rtc time will be wrong!!
  229. [ 2.350000] using rtc device, rtc, for alarms
  230. [ 2.360000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  231. [ 2.370000] i2c /dev entries driver
  232. [ 2.380000] !!! base_Addr = 0xe88b8c00
  233. [ 2.380000] config i2c gpio with gpio_config api
  234. [ 2.390000] twi0, apb clock = 24000000
  235. [ 2.400000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  236. [ 2.410000] I2C: i2c-0: AW16XX I2C adapter
  237. [ 2.420000] usb 4-1: new high speed USB device number 2 using sw-ehci
  238. [ 2.430000] **********start************
  239. [ 2.440000] 0x40
  240. [ 2.440000] 0xf8
  241. [ 2.440000] 0x28
  242. [ 2.440000] 0x0
  243. [ 2.450000] 0x0
  244. [ 2.450000] **********end************
  245. [ 2.450000] !!! base_Addr = 0xe88ba000
  246. [ 2.460000] twi1, apb clock = 24000000
  247. [ 2.470000] I2C: i2c-1: AW16XX I2C adapter
  248. [ 2.480000] **********start************
  249. [ 2.480000] 0x40
  250. [ 2.480000] 0xf8
  251. [ 2.490000] 0x58
  252. [ 2.490000] 0x0
  253. [ 2.490000] 0x0
  254. [ 2.490000] **********end************
  255. [ 2.500000] !!! base_Addr = 0xe88bc400
  256. [ 2.510000] twi2, apb clock = 24000000
  257. [ 2.510000] I2C: i2c-2: AW16XX I2C adapter
  258. [ 2.520000] **********start************
  259. [ 2.530000] 0x40
  260. [ 2.530000] 0xf8
  261. [ 2.530000] 0x58
  262. [ 2.530000] 0x0
  263. [ 2.540000] 0x0
  264. [ 2.540000] **********end************
  265. [ 2.540000] lirc_dev: IR Remote Control driver registered, major 250
  266. [ 2.560000] IR NEC protocol handler initialized
  267. [ 2.560000] IR RC5(x) protocol handler initialized
  268. [ 2.570000] IR RC6 protocol handler initialized
  269. [ 2.580000] IR JVC protocol handler initialized
  270. [ 2.590000] IR Sony protocol handler initialized
  271. [ 2.600000] IR RC5 (streamzap) protocol handler initialized
  272. [ 2.610000] IR LIRC bridge handler initialized
  273. [ 2.620000] Linux video capture interface: v2.00
  274. [ 2.620000] [cedar dev]: install start!!!
  275. [ 2.630000] [cedar dev]: install end!!!
  276. [ 2.640000] [ace_drv] start!!!
  277. [ 2.640000] [ace_drv] init end!!!
  278. [ 2.650000] [pa_drv] start!!!
  279. [ 2.650000] [pa_drv] init end!!!
  280. [ 2.660000] print_constraints: axp20_ldo1: 1300 mV
  281. [ 2.670000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  282. [ 2.680000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  283. [ 2.700000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  284. [ 2.710000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  285. [ 2.720000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  286. [ 2.730000] usb 2-1.1: new low speed USB device number 3 using sw-ehci
  287. [ 2.750000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  288. [ 2.760000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-0034/axp20-supplyer.41/input/input0
  289. [ 2.790000] Bluetooth: HCI UART driver ver 2.2
  290. [ 2.800000] Bluetooth: HCI H4 protocol initialized
  291. [ 2.810000] Bluetooth: HCI BCSP protocol initialized
  292. [ 2.820000] Bluetooth: HCILL protocol initialized
  293. [ 2.830000] cpuidle: using governor ladder
  294. [ 2.830000] cpuidle: using governor menu
  295. [ 2.840000] [mmc_pm]: no sdio card used in configuration
  296. [ 2.850000] [mmc]: sunximmc_init
  297. [ 2.860000] [mmc]: sunxi mmc controller using config : 0x9
  298. [ 2.870000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  299. [ 2.880000] [mmc]: mmc 0 power off !!
  300. [ 2.880000] [mmc]: mmc0 Probe: base:0xe88d6000 irq:32 dma:0 pdes:0xe701c000, ret 0.
  301. [ 2.900000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  302. [ 2.910000] [mmc]: mmc 3 power off !!
  303. [ 2.910000] [mmc]: mmc3 Probe: base:0xe88d8000 irq:35 dma:0 pdes:0xe7020000, ret 0.
  304. [ 2.930000] sunxi_leds driver init
  305. [ 2.930000] sunxi leds can't find script data '[leds_para]' 'leds_used'
  306. [ 2.950000] usbcore: registered new interface driver usbhid
  307. [ 2.960000] usbhid: USB HID core driver
  308. [ 2.960000] enter sun4i Audio codec!!!
  309. [ 2.970000] input: HID 04f3:0103 as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
  310. [ 2.990000] sun4i audio support initialized
  311. [ 3.000000] sun4i Audio codec successfully loaded..
  312. [ 3.010000] generic-usb 0003:04F3:0103.0001: input: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-sw-ehci-1.1/input0
  313. [ 3.030000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  314. [ 3.040000] ALSA device list:
  315. [ 3.040000] #0: sun4i-CODEC Audio Codec
  316. [ 3.050000] #1: sun4i-sndhdmi
  317. [ 3.060000] IPv4 over IPv4 tunneling driver
  318. [ 3.060000] TCP cubic registered
  319. [ 3.070000] input: HID 04f3:0103 as /devices/platform/sw-ehci.1/usb2/2-1/2-1.1/2-1.1:1.1/input/input2
  320. [ 3.090000] Initializing XFRM netlink socket
  321. [ 3.100000] NET: Registered protocol family 10
  322. [ 3.100000] NET: Registered protocol family 17
  323. [ 3.110000] generic-usb 0003:04F3:0103.0002: input: USB HID v1.10 Device [HID 04f3:0103] on usb-sw-ehci-1.1/input1
  324. [ 3.130000] NET: Registered protocol family 15
  325. [ 3.140000] Bluetooth: RFCOMM TTY layer initialized
  326. [ 3.150000] Bluetooth: RFCOMM socket layer initialized
  327. [ 3.160000] Bluetooth: RFCOMM ver 1.11
  328. [ 3.170000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  329. [ 3.170000] Bluetooth: BNEP filters: protocol multicast
  330. [ 3.180000] 802.1Q VLAN Support v1.8
  331. [ 3.190000] [mmc_pm]: No sdio card, please check your config !!
  332. [ 3.200000] Registering the dns_resolver key type
  333. [ 3.210000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  334. [ 3.220000] Registering SWP/SWPB emulation handler
  335. [ 3.230000] registered taskstats version 1
  336. [ 3.250000] usb 2-1.3: new low speed USB device number 4 using sw-ehci
  337. [ 3.300000] I2C: i2c-3: HDMI I2C adapter
  338. [ 3.330000] ParseEDID
  339. [ 3.350000] EDID version: 1.3
  340. [ 3.350000] PCLK=85500000 X 1366 1436 1579 1792 Y 768 771 774 798 fr 59 PP
  341. [ 3.370000] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  342. [ 3.380000] Using above mode as preferred EDID mode
  343. [ 3.410000] Unimplemented SVD code 16
  344. [ 3.420000] Unimplemented SVD code 31
  345. [ 3.430000] Unimplemented SVD code 33
  346. [ 3.430000] Unimplemented SVD code 34
  347. [ 3.440000] Unimplemented SVD code 22
  348. [ 3.440000] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  349. [ 3.460000] disp_clk: Could not find a matching pll-freq for 108100000 pclk
  350. [ 3.470000] disp_clk: Could not find a matching pll-freq for 53900000 pclk
  351. [ 3.480000] disp_clk: Could not find a matching pll-freq for 74200000 pclk
  352. [ 3.500000] disp_clk: Could not find a matching pll-freq for 74600000 pclk
  353. [ 3.510000] disp_clk: Could not find a matching pll-freq for 78800000 pclk
  354. [ 3.520000] input: PIXART USB OPTICAL MOUSE as /devices/platform/sw-ehci.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
  355. [ 3.540000] disp_clk: Could not find a matching pll-freq for 53450000 pclk
  356. [ 3.550000] disp_clk: Could not find a matching pll-freq for 27100000 pclk
  357. [ 3.570000] generic-usb 0003:093A:2510.0003: input: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-sw-ehci-1.3/input0
  358. [ 3.590000] disp_clk: Could not find a matching pll-freq for 26150000 pclk
  359. [ 3.600000] Parse_VideoData_Block: VIC 4 (native) support
  360. [ 3.610000] Parse_VideoData_Block: VIC 19 support
  361. [ 3.620000] Parse_VideoData_Block: VIC 5 support
  362. [ 3.630000] Parse_VideoData_Block: VIC 20 support
  363. [ 3.640000] Parse_VideoData_Block: VIC 3 support
  364. [ 3.640000] Parse_VideoData_Block: VIC 18 support
  365. [ 3.650000] Parse_VideoData_Block: VIC 16 support
  366. [ 3.660000] Parse_VideoData_Block: VIC 31 support
  367. [ 3.670000] Parse_VideoData_Block: VIC 32 support
  368. [ 3.680000] Parse_VideoData_Block: VIC 33 support
  369. [ 3.690000] Parse_VideoData_Block: VIC 34 support
  370. [ 3.700000] Parse_VideoData_Block: VIC 7 support
  371. [ 3.700000] Parse_VideoData_Block: VIC 22 support
  372. [ 3.710000] Parse_AudioData_Block: max channel=2
  373. [ 3.720000] Parse_AudioData_Block: SampleRate code=7
  374. [ 3.730000] Parse_AudioData_Block: WordLen code=7
  375. [ 3.740000] Find HDMI Vendor Specific DataBlock
  376. [ 3.750000] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  377. [ 3.760000] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
  378. [ 3.770000] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  379. [ 3.780000] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  380. [ 3.800000] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  381. [ 3.810000] disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0
  382. [ 3.880000] [mmc]: mmc 0 detect change, present 1
  383. [ 4.180000] [mmc]: mmc 0 power on !!
  384. [ 4.220000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  385. [ 4.230000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  386. [ 4.240000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  387. [ 4.260000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  388. [ 4.270000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  389. [ 4.280000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  390. [ 4.340000] mmc0: new high speed SDHC card at address b368
  391. [ 4.360000] mmcblk0: mmc0:b368 SU04G 3.74 GiB
  392. [ 4.360000] mmcblk0: p1 p2
  393. [ 5.360000] Console: switching to colour frame buffer device 240x67
  394. [ 5.400000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  395. [ 5.410000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  396. [ 5.420000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  397. [ 5.440000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  398. [ 5.450000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  399. [ 5.470000] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
  400. [ 5.480000] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
  401. [ 5.500000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  402. [ 5.510000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  403. [ 5.590000] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: (null)
  404. [ 5.600000] VFS: Mounted root (ext4 filesystem) on device 179:2.
  405. [ 5.620000] devtmpfs: mounted
  406. [ 5.630000] Freeing init memory: 160K
  407. [ 6.430000] udevd[163]: starting version 175
  408. [ 8.430000] sw_usb_enable_hcd: usbc_num = 2
  409. [ 8.450000] rtw driver version=v4.1.0_3945.20120502
  410. [ 8.450000] Build at: Mar 25 2013 16:38:48
  411. [ 8.490000] register rtw_netdev_ops to netdev_ops
  412. [ 8.500000] rtw_wdev_alloc(padapter=e8934000)
  413. [ 8.510000] CHIP TYPE: RTL8188E
  414. [ 8.520000]
  415. [ 8.520000] usb_endpoint_descriptor(0):
  416. [ 8.520000] bLength=7
  417. [ 8.530000] bDescriptorType=5
  418. [ 8.530000] bEndpointAddress=81
  419. [ 8.540000] wMaxPacketSize=200
  420. [ 8.540000] bInterval=0
  421. [ 8.550000] RT_usb_endpoint_is_bulk_in = 1
  422. [ 8.550000]
  423. [ 8.550000] usb_endpoint_descriptor(1):
  424. [ 8.560000] bLength=7
  425. [ 8.560000] bDescriptorType=5
  426. [ 8.570000] bEndpointAddress=2
  427. [ 8.570000] wMaxPacketSize=200
  428. [ 8.580000] bInterval=0
  429. [ 8.580000] RT_usb_endpoint_is_bulk_out = 2
  430. [ 8.590000]
  431. [ 8.590000] usb_endpoint_descriptor(2):
  432. [ 8.600000] bLength=7
  433. [ 8.600000] bDescriptorType=5
  434. [ 8.610000] bEndpointAddress=3
  435. [ 8.610000] wMaxPacketSize=200
  436. [ 8.630000] bInterval=0
  437. [ 8.630000] RT_usb_endpoint_is_bulk_out = 3
  438. [ 8.640000] nr_endpoint=3, in_num=1, out_num=2
  439. [ 8.640000]
  440. [ 8.650000] USB_SPEED_HIGH
  441. [ 8.650000] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
  442. [ 8.670000] RF_Type is 3!!
  443. [ 8.670000] _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
  444. [ 8.680000] EEPROM type is E-FUSE
  445. [ 8.690000] ====> _ReadAdapterInfo8188EU
  446. [ 8.700000] Boot from EFUSE, Autoload OK !
  447. [ 8.840000] EEPROM ID=0x8129
  448. [ 8.840000] VID = 0x0BDA, PID = 0x8179
  449. [ 8.850000] Customer ID: 0x00, SubCustomer ID: 0xCD
  450. [ 8.860000] Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
  451. [ 8.870000] ### PS params=> power_mgnt(0),usbss_enable(0) ###
  452. [ 8.880000] ======= Path 0, Channel 0 =======
  453. [ 8.890000] Index24G_CCK_Base[0][0] = 0x27
  454. [ 8.900000] Index24G_BW40_Base[0][0] = 0x2c
  455. [ 8.910000] ======= Path 0, Channel 1 =======
  456. [ 8.910000] Index24G_CCK_Base[0][1] = 0x27
  457. [ 8.920000] Index24G_BW40_Base[0][1] = 0x2c
  458. [ 8.930000] ======= Path 0, Channel 2 =======
  459. [ 8.940000] Index24G_CCK_Base[0][2] = 0x27
  460. [ 8.940000] Index24G_BW40_Base[0][2] = 0x2c
  461. [ 8.950000] ======= Path 0, Channel 3 =======
  462. [ 8.960000] Index24G_CCK_Base[0][3] = 0x27
  463. [ 8.960000] Index24G_BW40_Base[0][3] = 0x2c
  464. [ 8.970000] ======= Path 0, Channel 4 =======
  465. [ 8.980000] Index24G_CCK_Base[0][4] = 0x27
  466. [ 8.990000] Index24G_BW40_Base[0][4] = 0x2c
  467. [ 8.990000] ======= Path 0, Channel 5 =======
  468. [ 9.000000] Index24G_CCK_Base[0][5] = 0x27
  469. [ 9.010000] Index24G_BW40_Base[0][5] = 0x2c
  470. [ 9.010000] ======= Path 0, Channel 6 =======
  471. [ 9.020000] Index24G_CCK_Base[0][6] = 0x24
  472. [ 9.030000] Index24G_BW40_Base[0][6] = 0x2c
  473. [ 9.040000] ======= Path 0, Channel 7 =======
  474. [ 9.040000] Index24G_CCK_Base[0][7] = 0x24
  475. [ 9.050000] Index24G_BW40_Base[0][7] = 0x2c
  476. [ 9.060000] ======= Path 0, Channel 8 =======
  477. [ 9.060000] Index24G_CCK_Base[0][8] = 0x24
  478. [ 9.070000] Index24G_BW40_Base[0][8] = 0x2c
  479. [ 9.080000] ======= Path 0, Channel 9 =======
  480. [ 9.090000] Index24G_CCK_Base[0][9] = 0x24
  481. [ 9.090000] Index24G_BW40_Base[0][9] = 0x2c
  482. [ 9.100000] ======= Path 0, Channel 10 =======
  483. [ 9.110000] Index24G_CCK_Base[0][10] = 0x24
  484. [ 9.120000] Index24G_BW40_Base[0][10] = 0x2c
  485. [ 9.120000] ======= Path 0, Channel 11 =======
  486. [ 9.130000] Index24G_CCK_Base[0][11] = 0x24
  487. [ 9.140000] Index24G_BW40_Base[0][11] = 0x2c
  488. [ 9.140000] ======= Path 0, Channel 12 =======
  489. [ 9.150000] Index24G_CCK_Base[0][12] = 0x24
  490. [ 9.160000] Index24G_BW40_Base[0][12] = 0x2c
  491. [ 9.170000] ======= Path 0, Channel 13 =======
  492. [ 9.180000] Index24G_CCK_Base[0][13] = 0x24
  493. [ 9.180000] Index24G_BW40_Base[0][13] = 0x2c
  494. [ 9.190000] ======= Path 0, Channel 14 =======
  495. [ 9.200000] Index24G_CCK_Base[0][14] = 0x24
  496. [ 9.210000] Index24G_BW40_Base[0][14] = 0x2c
  497. [ 9.210000] ======= TxCount 0 =======
  498. [ 9.220000] CCK_24G_Diff[0][0]= 0
  499. [ 9.220000] OFDM_24G_Diff[0][0]= 0
  500. [ 9.230000] BW20_24G_Diff[0][0]= 0
  501. [ 9.240000] BW40_24G_Diff[0][0]= 0
  502. [ 9.240000] ======= TxCount 1 =======
  503. [ 9.250000] CCK_24G_Diff[0][1]= -2
  504. [ 9.250000] OFDM_24G_Diff[0][1]= -2
  505. [ 9.260000] BW20_24G_Diff[0][1]= -2
  506. [ 9.270000] BW40_24G_Diff[0][1]= -2
  507. [ 9.270000] ======= TxCount 2 =======
  508. [ 9.280000] CCK_24G_Diff[0][2]= -2
  509. [ 9.280000] OFDM_24G_Diff[0][2]= -2
  510. [ 9.290000] BW20_24G_Diff[0][2]= -2
  511. [ 9.300000] BW40_24G_Diff[0][2]= -2
  512. [ 9.300000] ======= TxCount 3 =======
  513. [ 9.310000] CCK_24G_Diff[0][3]= -2
  514. [ 9.310000] OFDM_24G_Diff[0][3]= -2
  515. [ 9.320000] BW20_24G_Diff[0][3]= -2
  516. [ 9.320000] BW40_24G_Diff[0][3]= -2
  517. [ 9.330000] EEPROMRegulatory = 0x0
  518. [ 9.340000] EEPROM ChannelPlan = 0x 20
  519. [ 9.340000] EEPROM Customer ID: 0x 0
  520. [ 9.350000] SWAS: bHwAntDiv = 0, TRxAntDivType = 3
  521. [ 9.360000] Board Type: 0x 0
  522. [ 9.360000] ThermalMeter = 0x14
  523. [ 9.370000] <==== _ReadAdapterInfo8188EU in 680 ms
  524. [ 9.380000] rtw_macaddr_cfg MAC Address = 00:11:7f:29:a7:36
  525. [ 9.390000] MAC Address from pnetdev->dev_addr= 00:11:7f:29:a7:36
  526. [ 9.400000] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
  527. [ 9.410000] usbcore: registered new interface driver rtl8188eu
  528. [ 9.660000] udevd[198]: renamed network interface wlan0 to wlan1
  529. [ 10.730000] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  530. [ 10.980000] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  531. [ 11.350000] AHCI is disabled in script.bin
  532. [ 11.490000] UMP<2>: Inserting UMP device driver. Compiled: Mar 25 2013, time: 16:37:38
  533. [ 11.510000] UMP<2>: Using OS memory backend, allocation limit: 134217728
  534. [ 11.530000] UMP: UMP device driver loaded
  535. [ 11.690000] mali: use config clk_div 4
  536. [ 11.710000] mali: clk_div 4
  537. [ 11.710000] Mali: mali clock set completed, clock is 240000000 Mhz
  538. [ 11.730000] mali: use config clk_div 4
  539. [ 11.730000] mali: clk_div 4
  540. [ 11.750000] Mali: mali clock set completed, clock is 240000000 Mhz
  541. [ 11.760000] Mali: Mali device driver loaded
  542. [ 12.100000] [drm] Initialized drm 1.1.0 20060810
  543. [ 12.130000] Mali DRM initialize, driver name: mali_drm, version 2.1
  544. [ 12.160000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0
  545. [ 12.170000] Mali DRM initialize, driver name: mali_drm, version 2.1
  546. [ 12.180000] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
  547. [ 12.820000] usbcore: registered new interface driver rtl8192cu
  548. [ 19.590000] +871x_drv - drv_open, bup=0
  549. [ 19.650000] rtl8188e_FirmwareDownload: fw_ver=1 fw_subver=0 sig=0x88e1
  550. [ 19.700000] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00020004
  551. [ 19.730000] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000200c6
  552. [ 19.750000] Set RF Chip ID to RF_6052 and RF type to 1T1R.
  553. [ 20.120000] pDM_Odm TxPowerTrackControl = 1
  554. [ 20.510000] MAC Address from REG_MACID = 00:11:7f:29:a7:36
  555. [ 20.520000] rtl8188eu_hal_init in 930ms
  556. [ 20.530000] MAC Address = 00:11:7f:29:a7:36
  557. [ 20.540000] rtw_cfg80211_init_wiphy:rf_type=3
  558. [ 20.550000] -871x_drv - drv_open, bup=1
  559. [ 20.550000] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  560. [ 20.780000] cfg80211_rtw_change_iface call netdev_open
  561. [ 20.800000] +871x_drv - drv_open, bup=1
  562. [ 20.800000] -871x_drv - drv_open, bup=1
  563. [ 20.830000] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
  564. [ 20.860000] cfg80211_rtw_flush_pmksa
  565. [ 20.890000] cfg80211_rtw_change_station
  566. [ 20.920000] cfg80211_rtw_change_station
  567. [ 20.920000] cfg80211_rtw_change_station
  568. [ 22.010000] cfg80211_rtw_change_station
  569. [ 22.380000] survey done event(24)
  570. [ 23.050000] ==>pwr_state_check_handler .fw_state(8)
  571. [ 23.050000] ==> rtw_ps_cmd , enqueue CMD
  572. [ 24.540000] survey done event(1a)
  573. [ 24.590000]
  574. [ 24.590000] =>cfg80211_rtw_connect(netdev=e70d5000)
  575. [ 24.650000] privacy=1, key= (null), key_len=0, key_idx=0
  576. [ 24.650000] ssid=Orange-140F, len=11
  577. [ 24.700000] bssid=84:9c:a6:0e:14:11
  578. [ 24.700000] matched by bssid
  579. [ 24.750000] rtw_cfg80211_set_wpa_version, wpa_version=2
  580. [ 24.760000] rtw_cfg80211_set_auth_type, nl80211_auth_type=0
  581. [ 24.820000] rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
  582. [ 24.880000] rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
  583. [ 24.930000] rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
  584. [ 24.970000] cfg80211_rtw_connect, ie_len=22
  585. [ 24.980000] set wpa_ie(length:22):
  586. [ 24.980000] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
  587. [ 25.020000] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
  588. [ 25.060000] 0x00 0x0f 0xac 0x02 0x00 0x00 0x62 0xe7
  589. [ 25.060000] got wpa2_ie
  590. [ 25.090000] Set SSID under fw_state=0x00000008
  591. [ 25.090000] [by_bssid:0][assoc_ssid:Orange-140F][to_roaming:0] new candidate: Orange-140F(84:9c:a6:0e:14:11) rssi:-48
  592. [ 25.110000] rtw_select_and_join_from_scanned_queue: candidate: Orange-140F(84:9c:a6:0e:14:11)
  593. [ 25.130000] link to new AP
  594. [ 25.130000] set ch/bw before connected
  595. [ 25.200000] set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
  596. [ 25.220000] link to new AP
  597. [ 25.220000] issue_deauth to 84:9c:a6:0e:14:11
  598. [ 25.230000] issue_auth
  599. [ 25.230000] <=cfg80211_rtw_connect, ret 0
  600. [ 25.240000] OnAuthClient
  601. [ 25.250000] network.SupportedRates[0]=82
  602. [ 25.250000] network.SupportedRates[1]=84
  603. [ 25.260000] network.SupportedRates[2]=8B
  604. [ 25.270000] network.SupportedRates[3]=96
  605. [ 25.270000] network.SupportedRates[4]=0C
  606. [ 25.280000] network.SupportedRates[5]=12
  607. [ 25.280000] network.SupportedRates[6]=18
  608. [ 25.290000] network.SupportedRates[7]=24
  609. [ 25.300000] network.SupportedRates[8]=30
  610. [ 25.300000] network.SupportedRates[9]=48
  611. [ 25.310000] network.SupportedRates[10]=60
  612. [ 25.320000] network.SupportedRates[11]=6C
  613. [ 25.320000] bssrate_len = 12
  614. [ 25.330000] OnAssocRsp
  615. [ 25.340000] report_join_res(7)
  616. [ 25.340000] rtw_joinbss_update_network
  617. [ 25.350000] +rtw_update_ht_cap()
  618. [ 25.350000] rtw_joinbss_update_stainfo
  619. [ 25.360000] ### Set STA_(0) info
  620. [ 25.370000] rtw_cfg80211_indicate_connect(padapter=e8934000)
  621. [ 25.380000] pwdev->sme_state(b)=1
  622. [ 25.380000] pwdev->sme_state(a)=1
  623. [ 25.390000] HW_VAR_BASIC_RATE: BrateCfg(0x15f)
  624. [ 25.390000] WMM(0): 0, a42b
  625. [ 25.410000] cfg80211_rtw_change_station
  626. [ 25.410000] cfg80211_rtw_change_station
  627. [ 25.420000] WMM(1): 0, a44f
  628. [ 25.430000] WMM(2): 0, 5e4322
  629. [ 25.430000] WMM(3): 0, 2f3222
  630. [ 25.470000] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  631. [ 25.480000] HTOnAssocRsp
  632. [ 25.500000] cfg80211_rtw_change_station
  633. [ 25.520000] DBG_TX_DROP_FRAME rtw_xmit update attrib fail
  634. [ 25.530000] cfg80211_rtw_change_station
  635. [ 25.530000] cfg80211_rtw_change_station
  636. [ 25.540000] mlmeext_joinbss_event_callback ==>### MacID(0),Set Max Tx RPT MID(1)
  637. [ 25.590000] ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
  638. [ 25.600000] cfg80211_rtw_change_station
  639. [ 25.630000] rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
  640. [ 25.660000] cfg80211_rtw_add_key(netdev=e70d5000), Adding key for 84:9c:a6:0e:14:11
  641. [ 25.700000] cipher=0xfac04
  642. [ 25.700000] key_len=0x10
  643. [ 25.710000] SetFwRsvdPagePkt
  644. [ 25.770000] SetFwRsvdPagePkt: Set RSVD page location to Fw
  645. [ 25.770000] seq_len=0x6
  646. [ 25.780000] Set RSVD page location to Fw.
  647. [ 25.830000] key_index=0
  648. [ 25.830000] =>mlmeext_joinbss_event_callback
  649. [ 25.840000] pairwise=1
  650. [ 25.840000] rtw_cfg80211_set_encryption
  651. [ 25.880000] rtw_cfg80211_set_encryption, : param->u.crypt.set_tx ==1
  652. [ 25.920000]
  653. [ 25.920000] ~~~~stastakey:unicastkey
  654. [ 25.950000] rtw_cfg80211_set_encryption, ret=0
  655. [ 25.960000] cfg80211_rtw_set_default_key
  656. [ 25.960000] cfg80211_rtw_add_key(netdev=e70d5000), Adding key for (null)
  657. [ 26.040000] cipher=0xfac04
  658. [ 26.040000] key_len=0x10
  659. [ 26.040000] seq_len=0x6
  660. [ 26.080000] key_index=3
  661. [ 26.080000] pairwise=0
  662. [ 26.080000] rtw_cfg80211_set_encryption
  663. [ 26.120000]
  664. [ 26.120000] ~~~~stastakey:groupkey
  665. [ 26.170000] ==> rtw_set_key algorithm(4),keyid(3),key_mask(8)
  666. [ 26.220000] rtw_cfg80211_set_encryption, ret=0
  667. [ 26.280000] cfg80211_rtw_change_station
  668. [ 31.570000] OnAction_back
  669. [ 31.570000] OnAction_back, action=0
  670. [ 31.580000] issue_action_BA, category=3, action=1, status=0
  671. [ 36.620000] wlan1: no IPv6 routers present
  672. [ 42.360000] survey done event(18)
  673. [ 82.360000] survey done event(13)
  674. [ 142.350000] survey done event(a)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!