SHARE
TWEET

BPi-M3, trying to boot Ubuntu 15.04 image with recent fixes

a guest Nov 30th, 2015 254 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. boot0 version : 4.0.0
  2. rtc[1] value = 0x00010000
  3. rtc[2] value = 0x00020000
  4. rtc[3] value = 0x00030000
  5. DRAM DRIVE INFO: V1.0
  6. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  7. DRAM normal_mode value: 00000001
  8. DRAM CLK =672 MHZ
  9. PMU: AXP81X
  10. ddr voltage = 1200 mv
  11. using ic A83T
  12. using axp AXP813
  13. DRAM zq value: 00003bfb
  14. dram size =2048
  15. card boot number = 0
  16. card no is 0
  17. sdcard 0 line count 0
  18. [mmc]: mmc driver ver 2014-8-11 15:06:39
  19. [mmc]: ***Try SD card 0***
  20. [mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  21. [mmc]: vendor: Man 00035344 Snr 10133156
  22. [mmc]: product: SU08G
  23. [mmc]: revision: 8.0
  24. [mmc]: ***SD/MMC 0 init OK!!!***
  25. sdcard 0 init ok
  26. ERROR! NOT find the head of uboot.
  27. The size of uboot is 000d4000.
  28. sum=a6c75121
  29. src_sum=a6c75121
  30. Succeed in loading uboot from sdmmc flash.
  31. Ready to disable icache.
  32. Jump to secend Boot.
  33. [      0.312]
  34.  
  35. U-Boot 2011.09-rc1-00000-g00d9887-dirty (Nov 30 2015 - 15:09:15) Allwinner Technology
  36.  
  37. [      0.322]version: 2.1.0
  38. normal mode
  39. [      0.400]pmbus:   normal or secure os
  40. ready
  41. [      0.405]PMU: AXP81X
  42. [      0.407]PMU: AXP81X found
  43. bat_vol=365, ratio=100
  44. [      0.412]PMU: dcdc2 900
  45. [      0.415]PMU: pll1 1008 Mhz
  46. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  47. set power on vol to default
  48. dcdc1_vol = 3300, onoff=1
  49. dcdc2_vol = 900, onoff=1
  50. dcdc3_vol = 900, onoff=1
  51. dcdc4_vol = 900, onoff=1
  52. dcdc6_vol = 900, onoff=1
  53. aldo1_vol = 1800, onoff=0
  54. aldo2_vol = 1800, onoff=1
  55. aldo3_vol = 3000, onoff=1
  56. eldo2_vol = 1800, onoff=0
  57. dldo1_vol = 3300, onoff=0
  58. dldo2_vol = 3300, onoff=0
  59. dldo3_vol = 2500, onoff=1
  60. dldo4_vol = 2800, onoff=0
  61. fldo2_vol = 900, onoff=1
  62. find power_sply to end
  63. supply=dcdc1
  64. axp=axp81x, supply=dcdc1, vol=3300
  65. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  66. supply=dcdc1
  67. axp=axp81x, supply=dcdc1, vol=3300
  68. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  69. supply=dldo3
  70. axp=axp81x, supply=dldo3, vol=1800
  71. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  72. supply=dcdc1
  73. axp=axp81x, supply=dcdc1, vol=3300
  74. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  75. supply=dcdc1
  76. axp=axp81x, supply=dcdc1, vol=3300
  77. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  78. supply=dcdc1
  79. axp=axp81x, supply=dcdc1, vol=3300
  80. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  81. supply=dcdc1
  82. axp=axp81x, supply=dcdc1, vol=3300
  83. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  84. supply=aldo3
  85. axp=axp81x, supply=aldo3, vol=3000
  86. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  87. config gpio bias voltage finish
  88. vbus exist
  89. no battery, limit to dc
  90. ac100 reg 0x00 = 0x101
  91. ac100 reg 0xd0 = 0x0
  92. ac100 reg 0xd1 = 0x0
  93. fel key old mode
  94. run key detect
  95. no key found
  96. no key input
  97. dram_para_set start
  98. dram_para_set end
  99. [      1.639]DRAM:  2 GiB
  100. relocation Offset is: 75af9000
  101. gic: normal or no secure os mode
  102. script config pll_de to 504 Mhz
  103. script config pll_video1 to 297 Mhz
  104. Not Found clk pll_video in script
  105. enable power vcc-hdmi-18, ret=0
  106. DRV_DISP_Init end
  107. [      1.801]boot_disp.output_disp=1
  108. [      1.804]boot_disp.output_type=3
  109. [      1.808]boot_disp.output_mode=10
  110. [      1.811]fetch script data boot_disp.auto_hpd fail
  111. disp1 device type(4) enable
  112. attched ok, mgr1<-->device1, type=4, mode=10----
  113. ready to set mode
  114. workmode = 0
  115. MMC:     0
  116. [      1.826][mmc]: mmc driver ver 2015-04-13 14:50:00
  117. [      1.831][mmc]: get sdc_phy_wipe fail.
  118. [      1.835][mmc]: get sdc0 sdc_erase fail.
  119. [      1.839][mmc]: get sdc_f_max fail,use default 50000000Hz
  120. [      1.845][mmc]: get sdc_ex_dly_used fail,use default dly
  121. [      1.850][mmc]: SUNXI SD/MMC: 0
  122. [      1.863][mmc]: *Try SD card 0*
  123. [      1.910][mmc]: CID 0x3534453 0x55303847 0x80101331 0x5600d69b
  124. [      1.915][mmc]: mmc clk 50000000
  125. [      1.919][mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  126. [      1.923][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  127. [      1.929][mmc]: ***SD/MMC 0 init OK!!!***
  128. [      1.933][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  129. [      1.939][mmc]: secure_feature 0x0
  130. [      1.942][mmc]: secure_removal_type  0x0
  131. [      1.946]sunxi flash init ok
  132. [      1.955][mmc]: MMC Device 2 not found
  133. [      1.959][mmc]: Can not find mmc dev
  134. [      1.962][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  135. sunxi_secstorage_read fail
  136. get secure storage map err
  137. sunxi secure storage is not supported
  138. private partition is not exist
  139. In:    serial
  140. Out:   serial
  141. Err:   serial
  142. --------fastboot partitions--------
  143. -total partitions:6-
  144. -name-        -start-       -size-      
  145. boot-res    : 1000000       2000000    
  146. env         : 3000000       1000000    
  147. boot        : 4000000       1000000    
  148. rootfs      : 5000000       20000000    
  149. klog        : 25000000      1000000    
  150. UDISK       : 26000000      0          
  151. -----------------------------------
  152. base bootcmd=run setargs_nand boot_normal
  153. bootcmd set setargs_mmc
  154. key 0
  155. recovery key high 10, low 8
  156. cant find fstbt value
  157. no misc partition is found
  158. to be run cmd=run setargs_mmc boot_normal
  159. serial is: 00000000000000000000
  160. mount part name boot-res
  161. cant open script.bin, maybe it is not exist
  162. WORK_MODE_BOOT
  163. board_status_probe
  164. [      2.065]power trigger
  165. bat_exist=0
  166. [      2.068]no battery exist
  167. sunxi_bmp_logo_display
  168. [      2.368]fetch script data boot_disp.output_disp fail
  169. [      2.373]screen_id =1, screen_width =1920, screen_height =1080
  170. [      2.379]frame buffer address 46400000
  171. [      2.383]Hit any key to stop autoboot:  0
  172. read boot or recovery all
  173. [      6.324]sunxi flash read :offset 4000000, 16439339 bytes OK
  174. [      6.335]ready to boot
  175. [      6.338][mmc]: MMC Device 2 not found
  176. [      6.341][mmc]:  mmc  not find,so not exit
  177. [      6.345]
  178. Starting kernel ...
  179.  
  180. [sun8i_fixup]: From boot, get meminfo:
  181.         Start:  0x40000000
  182.         Size:   2048MB
  183. ion_carveout reserve: 96m 128m
  184. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  185. ion_cma reserve: 120m 176m 512m
  186. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  187. ------sun8i_smp_init_ops----37-----
  188. [    0.000000] Booting Linux on physical CPU 0
  189. [    0.000000] Initializing cgroup subsys cpuset
  190. [    0.000000] Initializing cgroup subsys cpu
  191. [    0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@opennms) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.05
  192. [    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  193. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  194. [    0.000000] Machine: sun8i
  195. [    0.000000] cma: CMA: reserved 512 MiB at a0000000
  196. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  197. [    0.000000] On node 0 totalpages: 524288
  198. [    0.000000] free_area_init_node: node 0, pgdat c0ba3400, node_mem_map c0c4b000
  199. [    0.000000]   Normal zone: 1404 pages used for memmap
  200. [    0.000000]   Normal zone: 0 pages reserved
  201. [    0.000000]   Normal zone: 158340 pages, LIFO batch:31
  202. [    0.000000]   HighMem zone: 3204 pages used for memmap
  203. [    0.000000]   HighMem zone: 361340 pages, LIFO batch:31
  204. [    0.000000] script_init enter!
  205. [    0.000000] script_init exit!
  206. [    0.000000] [mcpm_smp_init_cpus] ncores=8
  207. [    0.000000] PERCPU: Embedded 8 pages/cpu @c1e6f000 s11776 r8192 d12800 u32768
  208. [    0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  209. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  210. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519680
  211. [    0.000000] Kernel command line: boot_type=1 disp_para=40a0000 fb_base=0x0 config_size=55080 androidboot.serialno=00000000000000000000 androidboot.hardware=sun8i enfor1
  212. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  213. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  214. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  215. [    0.000000] allocated 4194304 bytes of page_cgroup
  216. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  217. [    0.000000] Memory: 2048MB = 2048MB total
  218. [    0.000000] Memory: 1536492k/1536492k available, 560660k reserved, 933888K highmem
  219. [    0.000000] Virtual kernel memory layout:
  220. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  221. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  222. [    0.000000]     vmalloc : 0xe7800000 - 0xff000000   ( 376 MB)
  223. [    0.000000]     lowmem  : 0xc0000000 - 0xe7000000   ( 624 MB)
  224. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  225. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  226. [    0.000000]       .text : 0xc0008000 - 0xc0a10630   (10274 kB)
  227. [    0.000000]       .init : 0xc0a11000 - 0xc0a65e00   ( 340 kB)
  228. [    0.000000]       .data : 0xc0a66000 - 0xc0bb5468   (1342 kB)
  229. [    0.000000]        .bss : 0xc0bb548c - 0xc0c4a9f8   ( 598 kB)
  230. [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  231. [    0.000000] Preemptible hierarchical RCU implementation.
  232. [    0.000000] NR_IRQS:544
  233. [    0.000000] Architected local timer running at 24.00MHz.
  234. [    0.000000] Switching to timer-based delay loop
  235. [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  236. [    0.000000] Console: colour dummy device 80x30
  237. [    0.000000] console [tty1] enabled
  238. [    0.001418] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  239. [    0.001491] pid_max: default: 32768 minimum: 301
  240. [    0.001831] Mount-cache hash table entries: 512
  241. [    0.003178] Initializing cgroup subsys cpuacct
  242. [    0.003221] Initializing cgroup subsys memory
  243. [    0.003294] Initializing cgroup subsys devices
  244. [    0.003328] Initializing cgroup subsys freezer
  245. [    0.003360] Initializing cgroup subsys blkio
  246. [    0.003412] Initializing cgroup subsys perf_event
  247. [    0.003508] CPU: Testing write buffer coherency: ok
  248. [    0.003598] ftrace: allocating 25296 entries in 75 pages
  249. [    0.040299] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  250. [    0.040386] Setting up static identity map for 0x406d93a0 - 0x406d93f8
  251. [    0.010000] CPU1: Booted secondary processor
  252. [    0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  253. [    0.010000] CPU2: Booted secondary processor
  254. [    0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  255. [    0.010000] CPU3: Booted secondary processor
  256. [    0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  257. [    0.260090] CPU4: failed to boot: -22
  258. [    0.300067] CPU5: failed to boot: -22
  259. [    0.340070] CPU6: failed to boot: -22
  260. [    0.380091] CPU7: failed to boot: -22
  261. [    0.380308] Brought up 4 CPUs
  262. [    0.380333] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  263. [    0.380908] devtmpfs: initialized
  264. [    0.390190] pinctrl core: initialized pinctrl subsystem
  265. [    0.411398] NET: Registered protocol family 16
  266. [    0.433826] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  267. [    0.433944] script_sysfs_init success
  268. [    0.433996] sunxi_dump_init success
  269. [    0.435163] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  270. [    0.436988] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  271. [    0.437454] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  272. [    0.438856] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  273. [    0.438901] hw-breakpoint: maximum watchpoint size is 8 bytes.
  274. [    0.439713] [sunxi-module]: [sunxi-module.0] probe success
  275. [    0.440448] script config pll_video1 to 297 Mhz
  276. [    0.440486] script config pll_ve to 432 Mhz
  277. [    0.440510] Not Found clk pll_periph in script
  278. [    0.440540] script config pll_gpu to 432 Mhz
  279. [    0.440568] script config pll_hsic to 480 Mhz
  280. [    0.440597] script config pll_de to 504 Mhz
  281. [    0.440619] sunxi_default_clk_init
  282. [    0.440639] try to set pll6ahb1 to 200000000
  283. [    0.440701] try to set ahb clk source to pll6ahb1
  284. [    0.440726] set ahb clk source to pll6ahb1
  285. [    0.440750] try to set ahb1 to 200000000
  286. [    0.440776] try to set apb1 to 100000000
  287. [    0.441881] ===fe3o4==== sunxi_root_procfs_attach ret:0
  288. [    0.451136] bio: create slab <bio-0> at 0
  289. [    0.451136] [ARISC] :sunxi-arisc driver v1.70
  290. [    0.463232] [ARISC] :arisc version: [v0.1.25.3]
  291. [    0.463288] [sunxi-module]: arisc register success
  292. [    0.463722] sunxi_get_soc_bin: slow chip
  293. [    0.464168] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  294. [    0.010000] CPU4: Booted secondary processor
  295. [    0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  296. [    0.010000] CPU5: Booted secondary processor
  297. [    0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  298. [    0.010000] CPU6: Booted secondary processor
  299. [    0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  300. [    0.010000] CPU7: Booted secondary processor
  301. [    0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  302. [    0.491439] SCSI subsystem initialized
  303. [    0.491439] libata version 3.00 loaded.
  304. [    0.491439] usbcore: registered new interface driver usbfs
  305. [    0.491439] usbcore: registered new interface driver hub
  306. [    0.491439] usbcore: registered new device driver usb
  307. [    0.491439] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  308. [    0.491439] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  309. [    0.491439] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  310. [    0.491692] Linux video capture interface: v2.00
  311. [    0.510407] Advanced Linux Sound Architecture Driver Version 1.0.25.
  312. [    0.511066] Bluetooth: Core ver 2.16
  313. [    0.511135] NET: Registered protocol family 31
  314. [    0.511162] Bluetooth: HCI device and connection manager initialized
  315. [    0.511197] Bluetooth: HCI socket layer initialized
  316. [    0.511224] Bluetooth: L2CAP socket layer initialized
  317. [    0.511270] Bluetooth: SCO socket layer initialized
  318. [    0.511562] cfg80211: Calling CRDA to update world regulatory domain
  319. [    0.511654] Switching to clocksource arch_sys_counter
  320. [    0.537715] FS-Cache: Loaded
  321. [    0.538081] CacheFiles: Loaded
  322. [    0.549742] axp81x_dcdc1: Failed to create debugfs directory
  323. [    0.551052] NET: Registered protocol family 2
  324. [    0.551455] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  325. [    0.552244] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  326. [    0.554737] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  327. [    0.556318] TCP: Hash tables configured (established 131072 bind 65536)
  328. [    0.556350] TCP: reno registered
  329. [    0.556377] UDP hash table entries: 512 (order: 2, 16384 bytes)
  330. [    0.556449] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  331. [    0.556884] NET: Registered protocol family 1
  332. [    0.557331] RPC: Registered named UNIX socket transport module.
  333. [    0.557365] RPC: Registered udp transport module.
  334. [    0.557389] RPC: Registered tcp transport module.
  335. [    0.557413] RPC: Registered tcp NFSv4.1 backchannel transport module.
  336. [    0.558267] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  337. [    0.558473] [pm]aw_pm_init!
  338. [    0.558500] standby_mode = 1.
  339. [    0.558521] wakeup src cnt is : 2.
  340. [    0.558548] pmu name: pmu1_para .
  341. [    0.558574] pmu1_enable = 0x1.
  342. [    0.558595] pmux_id = 0x7.
  343. [    0.558617] pmu name: pmu2_para .
  344. [    0.558639] config_pmux_para: script_parser_fetch err.
  345. [    0.558664] pmu2_enable = 0x0.
  346. [    0.559078] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  347. [    0.559264] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  348. [    0.559304] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  349. [    0.559399] after inited: sys_mask config = 0xebd5.
  350. [    0.559428] dynamic_standby enalbe = 0x0.
  351. [    0.559485] sunxi_reg_init enter
  352. [    0.559821] lock super standby for a83!
  353. [    0.559855] lookup_scene_lock_name: new scene lock super_standby
  354. [    0.559884] scene_lock_init name=super_standby
  355. [    0.559910] scene_lock: super_standby, type 5, count 1
  356. [    0.561896] highmem bounce pool size: 64 pages
  357. [    0.569942] VFS: Disk quotas dquot_6.5.2
  358. [    0.570362] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  359. [    0.572544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  360. [    0.574441] NTFS driver 2.1.30 [Flags: R/W].
  361. [    0.574859] fuse init (API version 7.18)
  362. [    0.575549] msgmni has been set to 1176
  363. [    0.583961] alg: No test for stdrng (krng)
  364. [    0.668162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  365. [    0.668218] io scheduler noop registered
  366. [    0.668241] io scheduler deadline registered
  367. [    0.668446] io scheduler cfq registered (default)
  368. [    0.668909] pwm module init!
  369. [    0.669513] [DISP]disp_module_init
  370. [    0.730947] [DISP] Fb_map_kernel_logo,line:893:Fb_map_kernel_logo failed!
  371. [    0.764188] Console: switching to colour frame buffer device 240x67
  372. [    0.797310] [DISP]disp_module_init finish
  373. [    0.872221] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  374. [    0.872421] sw_uart_pm()890 - uart0 clk is already enable
  375. [    0.872583] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  376. [    1.065521] console [ttyS0] enabled
  377. [    1.292844] axp81x_dcdc1: Failed to create debugfs directory
  378. [    2.799358] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  379. [    2.817344] axp81x_dcdc1: Failed to create debugfs directory
  380. [    2.834387] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  381. [    2.867613] brd: module loaded
  382. [    2.888335] loop: module loaded
  383. [    2.902652] [rf_pm]: select module num is 10
  384. [    2.917887] [rf_pm]: module power1 name vcc-wifi-io
  385. [    2.933759] [rf_pm]: failed to fetch module_power1_vol
  386. [    2.949830] [rf_pm]: module power2 name
  387. [    2.964380] [rf_pm]: failed to fetch module_power2_vol
  388. [    2.980245] [rf_pm]: module power3 name
  389. [    2.994619] [rf_pm]: failed to fetch module_power3_vol
  390. [    3.010357] [rf_pm]: mod has no power_switch gpio
  391. [    3.025555] [rf_pm]: mod has no chip_en gpio
  392. [    3.040140] [rf_pm]: lpo_use_apclk: ac10032k2
  393. [    3.054850] [rf_pm]: get power regulator  failed.
  394. [    3.069816] [rf_pm]: enable vcc-wifi-io.
  395. [    3.084466] [rf_pm]: mod info power switch -1
  396. [    3.095235] [rf_pm]: set ac10032k2 32k out
  397. [    3.105675] scene_lock_init name=rf_pm
  398. [    3.115837] [wifi_pm]: wifi gpio init is OK !!
  399. [    3.126468] [rfkill]: mod has no ls_int gpio
  400. [    3.136849] [rfkill]: mod has no pcm_ch gpio
  401. [    3.147538] [rfkill]: rfkill set power 0
  402. [    3.170094] Loading iSCSI transport class v2.0-870.
  403. [    3.181660] iscsi: registered transport (tcp)
  404. [    3.192751] [spi]: Found 1 spi devices in config files
  405. [    3.204262] boards_num       modalias         max_spd_hz       bus_num  cs   mode
  406. [    3.218461] 0                m25p32           33000000         0        0    0  
  407. [    3.234193] usbcore: registered new interface driver qf9700
  408. [    3.246342] usbcore: registered new interface driver smsc95xx
  409. [    3.258661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  410. [    3.292049] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  411. [    3.307095] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  412. [    3.322651] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  413. [    3.350070] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  414. [    3.362771] ehci_irq: highspeed device connect
  415. [    3.373926] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  416. [    3.387638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  417. [    3.401901] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  418. [    3.416453] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  419. [    3.430067] usb usb1: SerialNumber: sunxi-ehci
  420. [    3.441890] hub 1-0:1.0: USB hub found
  421. [    3.452220] hub 1-0:1.0: 1 port detected
  422. [    3.463139] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  423. [    3.496278] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  424. [    3.511255] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  425. [    3.526027] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  426. [    3.594134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  427. [    3.607981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  428. [    3.622341] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  429. [    3.636655] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  430. [    3.650417] usb usb2: SerialNumber: sunxi-ohci
  431. [    3.662375] hub 2-0:1.0: USB hub found
  432. [    3.672970] hub 2-0:1.0: 1 port detected
  433. [    3.684006] Initializing USB Mass Storage driver...
  434. [    3.695824] usbcore: registered new interface driver usb-storage
  435. [    3.708778] USB Mass Storage support registered.
  436. [    3.720220] usbcore: registered new interface driver ums-alauda
  437. [    3.733104] usbcore: registered new interface driver ums-cypress
  438. [    3.745954] usbcore: registered new interface driver ums-datafab
  439. [    3.758723] usbcore: registered new interface driver ums_eneub6250
  440. [    3.771605] usbcore: registered new interface driver ums-freecom
  441. [    3.780124] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  442. [    3.797580] usbcore: registered new interface driver ums-isd200
  443. [    3.810117] usbcore: registered new interface driver ums-jumpshot
  444. [    3.822816] usbcore: registered new interface driver ums-karma
  445. [    3.835189] usbcore: registered new interface driver ums-onetouch
  446. [    3.847819] usbcore: registered new interface driver ums-realtek
  447. [    3.860297] usbcore: registered new interface driver ums-sddr09
  448. [    3.872615] usbcore: registered new interface driver ums-sddr55
  449. [    3.884879] usbcore: registered new interface driver ums-usbat
  450. [    3.897091] usbcore: registered new interface driver usbserial
  451. [    3.909168] usbcore: registered new interface driver usbserial_generic
  452. [    3.921980] USB Serial support registered for generic
  453. [    3.940671] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  454. [    3.953789] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  455. [    3.967420] usb 1-1: Product: USB 2.0 Hub
  456. [    3.978197] hub 1-1:1.0: USB hub found
  457. [    3.988165] hub 1-1:1.0: 4 ports detected
  458. [    3.999455] usbserial: USB Serial Driver core
  459. [    4.010316] file system registered
  460. [    4.021689] android_usb gadget: Mass Storage Function, version: 2009/09/11
  461. [    4.035153] android_usb gadget: Number of LUNs=3
  462. [    4.046100]  lun0: LUN: removable file: (no medium)
  463. [    4.057374]  lun1: LUN: removable file: (no medium)
  464. [    4.068582]  lun2: LUN: removable file: (no medium)
  465. [    4.080105] get usb_serial_number success from boot command line
  466. [    4.086748] android_usb gadget: android_usb ready
  467. [    4.103962] axp81x_dcdc1: Failed to create debugfs directory
  468. [    4.116211] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  469. [    4.128856] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  470. [    4.144014] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  471. [    4.157453] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  472. [    4.171408] usb usb3: Product: sunxi_hcd host driver
  473. [    4.182705] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  474. [    4.196390] usb usb3: SerialNumber: sunxi_hcd_host0
  475. [    4.208311] hub 3-0:1.0: USB hub found
  476. [    4.218323] hub 3-0:1.0: 1 port detected
  477. [    4.229507] mousedev: PS/2 mouse device common for all mice
  478. [    4.241885] sunxikbd_script_init: key para not found, used default para.
  479. [    4.256157] sunxi_rtc_init(796): sunxi rtc device register!
  480. [    4.256263] keyname:ctp_para  subname:ctp_power_io ,get error!
  481. [    4.280967] get sysconfig para erro!
  482. [    4.281113] rtc_gettime(333): read time 1970-1-1 1:0:11
  483. [    4.281528] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
  484. [    4.281997] rtc_gettime(333): read time 1970-1-1 1:0:11
  485. [    4.282269] rtc0 rtc0: rtc core: registered rtc0 as rtc0
  486. [    4.282513] sunxi_rtc_probe(756)!
  487. [    4.282593] i2c /dev entries driver
  488. [    4.283268] IR RC5(x) protocol handler initialized
  489. [    4.283470] sunxi cedar version 0.1
  490. [    4.283551] [cedar]: install start!!!
  491. [    4.283794] [cedar]: install end!!!
  492. [    4.289843] Bluetooth: HCI UART driver ver 2.2
  493. [    4.289857] Bluetooth: HCI H4 protocol initialized
  494. [    4.289865] Bluetooth: HCI BCSP protocol initialized
  495. [    4.289874] Bluetooth: HCI Realtek H5 protocol initialized
  496. [    4.290515] sunxi_get_soc_bin: slow chip
  497. [    4.293223] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.113 2015-5-20 17:17) Compiled in Nov 28 2015 at 13:56:38
  498. [    4.293259] [mmc]: get mmc1's sdc_power is null!
  499. [    4.293279] [mmc]: get mmc2's 2xmode ok, val = 1
  500. [    4.293284] [mmc]: get mmc2's ddrmode ok, val = 1
  501. [    4.293292] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
  502. [    4.413668] get sysconfig para erro!
  503. [    4.413682] get sysconfig para erro!
  504. [    4.413694] get sysconfig para erro!
  505. [    4.413735] ctp_wakeup: !!!!gpio data 1
  506. [    4.492887] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  507. [    4.507219] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  508. [    4.520065] get_device_para_value:get subname:icn83xx_ts error! val.val:0
  509. [    4.520072] get_detect_list: script_get_item err.support_number = 11.
  510. [    4.520080] get_device_para_value:get subname:gt818_ts error! val.val:0
  511. [    4.520085] get_detect_list: script_get_item err.support_number = 8.
  512. [    4.520091] get_device_para_value:get subname:tu_ts error! val.val:0
  513. [    4.520097] get_detect_list: script_get_item err.support_number = 7.
  514. [    4.520103] get_device_para_value:get subname:gt9xxf_ts error! val.val:0
  515. [    4.520108] get_detect_list: script_get_item err.support_number = 6.
  516. [    4.520115] get_device_para_value:get subname:gslX680new error! val.val:0
  517. [    4.520121] get_detect_list: script_get_item err.support_number = 3.
  518. [    4.520162] sw_get_write_info:open error ....IS(filp):1
  519. [    4.520176] sw_set_write_info:open error ....IS(filp):1
  520. [    4.520180] get write info erro!
  521. [    4.520367] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  522. [    4.540186] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  523. [    4.560184] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  524. [    4.580182] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  525. [    4.600192] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  526. [    4.655052] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  527. [    4.656273] [mmc]: sdc0 fail to get regulator
  528. [    4.656279] [mmc]: *** sunxi_mci_set_ios(L2159): sdc0 card_power_on fail
  529. [    4.670041] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  530. [    4.690853] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52,  RTO !!
  531. [    4.691699] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52,  RTO !!
  532. [    4.691724] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  533. [    4.694207] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  534. [    4.695629] *******************Try sdio*******************
  535. [    4.696443] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5,  RTO !!
  536. [    4.697271] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5,  RTO !!
  537. [    4.698098] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5,  RTO !!
  538. [    4.698923] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5,  RTO !!
  539. [    4.698943] *******************Try sd *******************
  540. [    4.699585] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  541. [    4.699677] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  542. [    4.702146] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  543. [    4.761548] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  544. [    4.761651] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  545. [    4.766858] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  546. [    4.766914] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  547. [    4.767025] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  548. [    4.767087] mmc0: new high speed SDHC card at address e624
  549. [    4.767451] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  550. [    4.768838]  mmcblk0: p1 p2
  551. [    4.769088] mmcblk0: p2 size 14835712 extends beyond EOD, truncated
  552. [    4.769485] *******************sd init ok*******************
  553. [    4.869025] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  554. [    5.003503] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  555. [    5.020038] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  556. [    5.040849] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52,  RTO !!
  557. [    5.041680] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52,  RTO !!
  558. [    5.041702] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  559. [    5.044167] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  560. [    5.046056] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 8,  RTO !!
  561. [    5.046076] *******************Try sdio*******************
  562. [    5.046889] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5,  RTO !!
  563. [    5.047714] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5,  RTO !!
  564. [    5.048539] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5,  RTO !!
  565. [    5.049364] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5,  RTO !!
  566. [    5.049384] *******************Try sd *******************
  567. [    5.050199] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55,  RTO !!
  568. [    5.051026] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55,  RTO !!
  569. [    5.051854] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55,  RTO !!
  570. [    5.052681] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55,  RTO !!
  571. [    5.052701] *******************Try mmc*******************
  572. [    5.052709] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  573. [    5.053114] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  574. [    5.053197] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  575. [    5.053280] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  576. [    5.055742] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  577. [    5.199685] sunxi_leds_fetch_sysconfig_para leds is not used in config
  578. [    5.211227] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  579. [    5.223180] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  580. [    5.223591] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  581. [    5.223678] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  582. [    5.223755] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  583. [    5.223805] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  584. [    5.223885] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  585. [    5.223962] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  586. [    5.224086] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  587. [    5.224157] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  588. [    5.224208] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  589. [    5.224277] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  590. [    5.224351] mmc1: new high speed DDR MMC card at address 0001
  591. [    5.224717] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB
  592. [    5.224860] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB
  593. [    5.224995] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB
  594. [    5.226496]  mmcblk1: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 >
  595. [    5.226540] mmcblk1: p1 size 10117120 extends beyond EOD, truncated
  596. [    5.228941] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  597. [    5.229987]  mmcblk1boot1: unknown partition table
  598. [    5.230618] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  599. [    5.231755]  mmcblk1boot0: unknown partition table
  600. [    5.231953] *******************mmc init ok *******************
  601. [    5.333016] =========script_get_err============
  602. [    5.461397] Registered led device: sunxi_respiration_lamp
  603. [    5.597006] usbcore: registered new interface driver usbhid
  604. [    5.632845] usbhid: USB HID core driver
  605. [    5.640792] ac100_probe,line:2917
  606. [    5.665308] asoc: ac100-aif1 <-> pri_dai mapping ok
  607. [    5.674285] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  608. [    5.683420] ------------audio_hmic_irq----------
  609. [    5.693140] asoc: ac100-aif1 <-> sec_dai mapping ok
  610. [    5.705362] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
  611. [    5.714694] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  612. [    5.728720] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  613. [    5.738882] IPv4 over IPv4 tunneling driver
  614. [    5.747161] TCP: cubic registered
  615. [    5.753917] Initializing XFRM netlink socket
  616. [    5.762102] NET: Registered protocol family 10
  617. [    5.770856] IPv6 over IPv4 tunneling driver
  618. [    5.778896] NET: Registered protocol family 17
  619. [    5.786876] NET: Registered protocol family 15
  620. [    5.794898] Bluetooth: RFCOMM TTY layer initialized
  621. [    5.803353] Bluetooth: RFCOMM socket layer initialized
  622. [    5.811970] Bluetooth: RFCOMM ver 1.11
  623. [    5.818968] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  624. [    5.827703] Bluetooth: BNEP filters: protocol multicast
  625. [    5.836393] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  626. [    5.845975] lib80211: common routines for IEEE802.11 drivers
  627. [    5.855238] lib80211_crypt: registered algorithm 'NULL'
  628. [    5.864128] Registering the dns_resolver key type
  629. [    5.872740] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  630. [    5.884302] ThumbEE CPU extension supported.
  631. [    5.892143] Registering SWP/SWPB emulation handler
  632. [    5.900604] sunxi_bootup_extend_init: bootup extend disable(default)
  633. [    5.911643] cmdline,disp=40a0000
  634. [    5.918386] [HDMI] power vcc-hdmi-18
  635. [    5.926820] rtc_gettime(333): read time 1970-1-1 1:0:13
  636. [    5.935861] rtc0 rtc0: setting system clock to 1970-01-01 01:00:13 UTC (3613)
  637. [    5.947915] sunxi_get_soc_bin: slow chip
  638. [    5.956053] CPU Budget:Register notifier
  639. [    5.963673] CPU Budget:register Success
  640. [    5.971085] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  641. [    5.988038] =========GPS========= :gsp not used in configuration
  642. [    5.998089] ALSA device list:
  643. [    6.004774]   #0: snddaudio
  644. [    6.011266]   #1: sndhdmi
  645. [    6.019175] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  646. [    6.170597] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  647. [    6.281164] EXT4-fs (mmcblk0p2): bad geometry: block count 1854464 exceeds size of device (1849344 blocks)
  648. [    6.520066] [DISP] disp_hdmi_set_detect,line:404:hdmi1's mgr is NULL
  649. [    6.530052] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
  650. [    7.141713] UDF-fs: warning (device mmcblk0p2): udf_fill_super: No partition found (1)
  651. [    7.270047] List of all partitions:
  652. [    7.277720] b300         7761920 mmcblk0  driver: mmcblk
  653. [    7.287437]   b301          262144 mmcblk0p1 00000000-0000-0000-0000-000000000000
  654. [    7.299619]   b302         7397376 mmcblk0p2 00000000-0000-0000-0000-000000000000
  655. [    7.311822] b310         7634944 mmcblk1  driver: mmcblk
  656. [    7.321593]   b311         5025792 mmcblk1p1 00000000-0000-0000-0000-000000000000
  657. [    7.333806]   b312           16384 mmcblk1p2 00000000-0000-0000-0000-000000000000
  658. [    7.345942]   b313               1 mmcblk1p3 00000000-0000-0000-0000-000000000000
  659. [    7.358003]   b315           16384 mmcblk1p5 00000000-0000-0000-0000-000000000000
  660. [    7.369979]   b316           16384 mmcblk1p6 00000000-0000-0000-0000-000000000000
  661. [    7.381891]   b317         1572864 mmcblk1p7 00000000-0000-0000-0000-000000000000
  662. [    7.393747]   b318           16384 mmcblk1p8 00000000-0000-0000-0000-000000000000
  663. [    7.405557]   b319           32768 mmcblk1p9 00000000-0000-0000-0000-000000000000
  664. [    7.417321]   b31a          786432 mmcblk1p10 00000000-0000-0000-0000-000000000000
  665. [    7.429160]   b31b           16384 mmcblk1p11 00000000-0000-0000-0000-000000000000
  666. [    7.440975]   b31c           16384 mmcblk1p12 00000000-0000-0000-0000-000000000000
  667. [    7.452747]   b31d           81920 mmcblk1p13 00000000-0000-0000-0000-000000000000
  668. [    7.464481] b330            4096 mmcblk1boot1  (driver?)
  669. [    7.473721] b320            4096 mmcblk1boot0  (driver?)
  670. [    7.482911] No filesystem could mount root, tried:  ext3 ext2 ext4 squashfs vfat msdos iso9660 ntfs fuseblk udf
  671. [    7.497601] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
  672. [    7.510467] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  673. [    7.523583] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c06cea70>] (panic+0x94/0x1f4)
  674. [    7.535788] [<c06cea70>] (panic+0x94/0x1f4) from [<c0a11df8>] (mount_block_root+0x240/0x290)
  675. [    7.548789] [<c0a11df8>] (mount_block_root+0x240/0x290) from [<c0a11f88>] (mount_root+0x58/0x68)
  676. [    7.562229] [<c0a11f88>] (mount_root+0x58/0x68) from [<c0a120f4>] (prepare_namespace+0x15c/0x1bc)
  677. [    7.575801] [<c0a120f4>] (prepare_namespace+0x15c/0x1bc) from [<c0a11a1c>] (kernel_init+0x1e0/0x224)
  678. [    7.589715] [<c0a11a1c>] (kernel_init+0x1e0/0x224) from [<c00114c4>] (kernel_thread_exit+0x0/0x8)
  679. [    7.603388] CPU0: stopping
  680. [    7.610214] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  681. [    7.613372] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  682. [    7.613372] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  683. [    7.613372] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  684. [    7.613372] Exception stack(0xc0a67c00 to 0xc0a67c48)
  685. [    7.613372] 7c00: 00000000 00000000 00000000 000003ff e6a41b00 00000000 e69f49c0 00000000
  686. [    7.613372] 7c20: 00000000 00000008 c0a89640 c0a67d2c 00000002 c0a67c48 c007a50c c007a554
  687. [    7.613372] 7c40: 80000113 ffffffff
  688. [    7.613372] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c007a554>] (find_busiest_group+0x2c0/0x9f4)
  689. [    7.613372] [<c007a554>] (find_busiest_group+0x2c0/0x9f4) from [<c007ad54>] (load_balance+0xcc/0x734)
  690. [    7.613372] [<c007ad54>] (load_balance+0xcc/0x734) from [<c007b4bc>] (rebalance_domains+0x100/0x194)
  691. [    7.613372] [<c007b4bc>] (rebalance_domains+0x100/0x194) from [<c007b590>] (run_rebalance_domains+0x40/0x13c)
  692. [    7.613372] [<c007b590>] (run_rebalance_domains+0x40/0x13c) from [<c0043cf8>] (__do_softirq+0x154/0x2ac)
  693. [    7.613372] [<c0043cf8>] (__do_softirq+0x154/0x2ac) from [<c0044370>] (irq_exit+0x64/0xb8)
  694. [    7.613372] [<c0044370>] (irq_exit+0x64/0xb8) from [<c006efa0>] (scheduler_ipi+0xd8/0xe4)
  695. [    7.613372] [<c006efa0>] (scheduler_ipi+0xd8/0xe4) from [<c00163c4>] (handle_IPI+0x130/0x308)
  696. [    7.613372] [<c00163c4>] (handle_IPI+0x130/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  697. [    7.613372] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  698. [    7.613372] Exception stack(0xc0a67f28 to 0xc0a67f70)
  699. [    7.613372] 7f20:                   000000ff c0a8919c 00000000 00000000 c0a66000 c0bb5588
  700. [    7.613372] 7f40: c06db7a4 c0a8d810 c1e6c600 410fc075 00000000 c0a67f7c c0a67f70 c0a67f70
  701. [    7.613372] 7f60: c0011588 c001158c 60000113 ffffffff
  702. [    7.613372] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  703. [    7.613372] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  704. [    7.613372] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06c5d3c>] (rest_init+0x7c/0x94)
  705. [    7.613372] [<c06c5d3c>] (rest_init+0x7c/0x94) from [<c0a117f4>] (start_kernel+0x280/0x2c8)
  706. [    7.613372] [<c0a117f4>] (start_kernel+0x280/0x2c8) from [<40008044>] (0x40008044)
  707. [    7.613388] CPU1: stopping
  708. [    7.613388] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  709. [    7.613388] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  710. [    7.613388] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  711. [    7.613388] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  712. [    7.613388] Exception stack(0xe68c5f68 to 0xe68c5fb0)
  713. [    7.613388] 5f60:                   0000007f c0a8919c 00000000 00000000 e68c4000 c0bb5588
  714. [    7.613388] 5f80: c06db7a4 c0a8d810 4000406a 410fc075 00000000 e68c5fbc e68c5fb0 e68c5fb0
  715. [    7.613388] 5fa0: c0011588 c001158c 60000113 ffffffff
  716. [    7.613388] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  717. [    7.613388] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  718. [    7.613388] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130)
  719. [    7.613388] [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130) from [<406cab94>] (0x406cab94)
  720. [    7.613386] CPU2: stopping
  721. [    7.613386] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  722. [    7.613386] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  723. [    7.613386] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  724. [    7.613386] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  725. [    7.613386] Exception stack(0xe68edf68 to 0xe68edfb0)
  726. [    7.613386] df60:                   0000003f c0a8919c 00000000 00000000 e68ec000 c0bb5588
  727. [    7.613386] df80: c06db7a4 c0a8d810 4000406a 410fc075 00000000 e68edfbc e68edfb0 e68edfb0
  728. [    7.613386] dfa0: c0011588 c001158c 60000013 ffffffff
  729. [    7.613386] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  730. [    7.613386] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  731. [    7.613386] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130)
  732. [    7.613386] [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130) from [<406cab94>] (0x406cab94)
  733. [    7.613389] CPU3: stopping
  734. [    7.613389] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  735. [    7.613389] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  736. [    7.613389] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  737. [    7.613389] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  738. [    7.613389] Exception stack(0xe68f7f68 to 0xe68f7fb0)
  739. [    7.613389] 7f60:                   0000001f c0a8919c 00000000 00000000 e68f6000 c0bb5588
  740. [    7.613389] 7f80: c06db7a4 c0a8d810 4000406a 410fc075 00000000 e68f7fbc e68f7fb0 e68f7fb0
  741. [    7.613389] 7fa0: c0011588 c001158c 60000013 ffffffff
  742. [    7.613389] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  743. [    7.613389] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  744. [    7.613389] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130)
  745. [    7.613389] [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130) from [<406cab94>] (0x406cab94)
  746. [    7.613390] CPU4: stopping
  747. [    7.613390] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  748. [    7.613390] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  749. [    7.613390] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  750. [    7.613390] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  751. [    7.613390] Exception stack(0xe6911f68 to 0xe6911fb0)
  752. [    7.613390] 1f60:                   0000000f c0a8919c 00000000 00000000 e6910000 c0bb5588
  753. [    7.613390] 1f80: c06db7a4 c0a8d810 4000406a 410fc075 00000000 e6911fbc e6911fb0 e6911fb0
  754. [    7.613390] 1fa0: c0011588 c001158c 60000113 ffffffff
  755. [    7.613390] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  756. [    7.613390] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  757. [    7.613390] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130)
  758. [    8.633281] SMP: failed to stop secondary CPUs
  759. [    7.613390] [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130) from [<406cab94>] (0x406cab94)
  760. [    7.613388] CPU6: stopping
  761. [    7.613388] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  762. [    7.613388] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  763. [    7.613388] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  764. [    7.613388] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  765. [    7.613388] Exception stack(0xe6927f68 to 0xe6927fb0)
  766. [    7.613388] 7f60:                   00000003 c0a8919c 00000000 00000000 e6926000 c0bb5588
  767. [    7.613388] 7f80: c06db7a4 c0a8d810 4000406a 410fc075 00000000 e6927fbc e6927fb0 e6927fb0
  768. [    7.613388] 7fa0: c0011588 c001158c 60000013 ffffffff
  769. [    7.613388] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  770. [    7.613388] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  771. [    7.613388] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130)
  772. [    7.613388] [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130) from [<406cab94>] (0x406cab94)
  773. [    7.613389] CPU7: stopping
  774. [    7.613389] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  775. [    7.613389] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c0016410>] (handle_IPI+0x17c/0x308)
  776. [    7.613389] [<c0016410>] (handle_IPI+0x17c/0x308) from [<c000a3d4>] (gic_handle_irq+0xa4/0xb4)
  777. [    7.613389] [<c000a3d4>] (gic_handle_irq+0xa4/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  778. [    7.613389] Exception stack(0xe694ff68 to 0xe694ffb0)
  779. [    7.613389] ff60:                   00000001 c0a8919c 00000000 00000000 e694e000 c0bb5588
  780. [    7.613389] ff80: c06db7a4 c0a8d810 4000406a 410fc075 00000000 e694ffbc e694ffb0 e694ffb0
  781. [    7.613389] ffa0: c0011588 c001158c 60000113 ffffffff
  782. [    7.613389] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c001158c>] (default_idle+0x38/0x40)
  783. [    7.613389] [<c001158c>] (default_idle+0x38/0x40) from [<c00119bc>] (cpu_idle+0xac/0x108)
  784. [    7.613389] [<c00119bc>] (cpu_idle+0xac/0x108) from [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130)
  785. [    7.613389] [<c06cb5a8>] (secondary_start_kernel+0x10c/0x130) from [<406cab94>] (0x406cab94)
  786. [    9.633293] sun8i hotplug: try to kill cpu:0 failed!
  787. [   10.644174] sun8i hotplug: try to kill cpu:1 failed!
  788. [   11.654982] sun8i hotplug: try to kill cpu:2 failed!
  789. [   12.665739] sun8i hotplug: try to kill cpu:3 failed!
  790. [   13.676432] sun8i hotplug: try to kill cpu:4 failed!
  791. [   14.687050] sun8i hotplug: try to kill cpu:6 failed!
  792. [   15.697602] sun8i hotplug: try to kill cpu:7 failed!
  793. [   36.480010] ------------[ cut here ]------------
  794. [   36.490005] WARNING: at kernel/watchdog.c:255 watchdog_timer_fn+0x118/0x2ec()
  795. [   36.490005] Watchdog detected hard LOCKUP on cpu 6
  796. [   36.490005] Modules linked in:
  797. [   36.490005] [<c0017b8c>] (unwind_backtrace+0x0/0x128) from [<c06ce5a0>] (dump_stack+0x20/0x24)
  798. [   36.490005] [<c06ce5a0>] (dump_stack+0x20/0x24) from [<c003cd88>] (warn_slowpath_common+0x5c/0x74)
  799. [   36.490005] [<c003cd88>] (warn_slowpath_common+0x5c/0x74) from [<c003ce5c>] (warn_slowpath_fmt+0x40/0x48)
  800. [   36.490005] [<c003ce5c>] (warn_slowpath_fmt+0x40/0x48) from [<c00a5468>] (watchdog_timer_fn+0x118/0x2ec)
  801. [   36.490005] [<c00a5468>] (watchdog_timer_fn+0x118/0x2ec) from [<c0060f98>] (__run_hrtimer+0x1b8/0x2d0)
  802. [   36.490005] [<c0060f98>] (__run_hrtimer+0x1b8/0x2d0) from [<c0061c20>] (hrtimer_interrupt+0x12c/0x294)
  803. [   36.490005] [<c0061c20>] (hrtimer_interrupt+0x12c/0x294) from [<c0016e50>] (arch_timer_handler+0x44/0x4c)
  804. [   36.490005] [<c0016e50>] (arch_timer_handler+0x44/0x4c) from [<c00a9644>] (handle_percpu_devid_irq+0x128/0x1f4)
  805. [   36.490005] [<c00a9644>] (handle_percpu_devid_irq+0x128/0x1f4) from [<c00a5b00>] (generic_handle_irq+0x3c/0x50)
  806. [   36.490005] [<c00a5b00>] (generic_handle_irq+0x3c/0x50) from [<c0011224>] (handle_IRQ+0x88/0xc8)
  807. [   36.490005] [<c0011224>] (handle_IRQ+0x88/0xc8) from [<c000a39c>] (gic_handle_irq+0x6c/0xb4)
  808. [   36.490005] [<c000a39c>] (gic_handle_irq+0x6c/0xb4) from [<c00103c4>] (__irq_svc+0x44/0x78)
  809. [   36.490005] Exception stack(0xe684fe48 to 0xe684fe90)
  810. [   36.490005] fe40:                   e684febc 00000000 00000000 c0016d0c e684febc 00005dbf
  811. [   36.490005] fe60: 00005140 0000001d c0aabc4c c0a62724 c0bb6fc0 e684fe9c e684fea0 e684fe90
  812. [   36.490005] fe80: c02b89e4 c0016d18 a0000013 ffffffff
  813. [   36.490005] [<c00103c4>] (__irq_svc+0x44/0x78) from [<c0016d18>] (arch_timer_read_current_timer+0xc/0x24)
  814. [   36.490005] [<c0016d18>] (arch_timer_read_current_timer+0xc/0x24) from [<c02b89e4>] (read_current_timer+0x30/0x48)
  815. [   36.490005] [<c02b89e4>] (read_current_timer+0x30/0x48) from [<c02b8a38>] (__timer_delay+0x3c/0x5c)
  816. [   36.490005] [<c02b8a38>] (__timer_delay+0x3c/0x5c) from [<c02b8a84>] (__timer_const_udelay+0x2c/0x34)
  817. [   36.490005] [<c02b8a84>] (__timer_const_udelay+0x2c/0x34) from [<c06ceb94>] (panic+0x1b8/0x1f4)
  818. [   36.490005] [<c06ceb94>] (panic+0x1b8/0x1f4) from [<c0a11df8>] (mount_block_root+0x240/0x290)
  819. [   36.490005] [<c0a11df8>] (mount_block_root+0x240/0x290) from [<c0a11f88>] (mount_root+0x58/0x68)
  820. [   36.490005] [<c0a11f88>] (mount_root+0x58/0x68) from [<c0a120f4>] (prepare_namespace+0x15c/0x1bc)
  821. [   36.490005] [<c0a120f4>] (prepare_namespace+0x15c/0x1bc) from [<c0a11a1c>] (kernel_init+0x1e0/0x224)
  822. [   36.490005] [<c0a11a1c>] (kernel_init+0x1e0/0x224) from [<c00114c4>] (kernel_thread_exit+0x0/0x8)
  823. [   36.490005] ---[ end trace 0d79e64e70065b69 ]---
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top