G90
M83
M106 S0
M140 S65
G10 P0 S0 R0
G10 P1 S0 R0
T1
T0
T1
;G10 P0 S265 R0 ;set standby temp for extruder 0
G10 P1 S220 R0 ;set standby temp for extruder 1
M204 P1000 T1500 ;set accel
M116 H0 ;wait for bed to heat
G28 ; home all axes
G29 S1 ; load bed level
G0 X100 Y00 F7200 ; Go to front
M116 ;wait for temps on everything
G1 E15 F3600 ; undo the retraction from finish / cancel
M572 D1 S0.08
M204 P500
G1 E-0.4000 F3600
G1 Z0.300 F1200
; process Process1
; layer 1, Z = 0.200
G0 X100 Y00 F7200 ; Go to front
T1
; tool H0.200 W0.400
; skirt
G1 X139.152 Y145.291 F18000
G1 Z0.200 F1200
G1 E0.4000 F1080
G1 X145.291 Y139.152 E0.2743 F7200
G1 X145.659 Y139.000 E0.0126
G1 X254.341 Y139.000 E3.4340
G1 X254.709 Y139.152 E0.0126
G1 X260.848 Y145.291 E0.2743
G1 X261.000 Y145.659 E0.0126
G1 X261.000 Y254.341 E3.4340
G1 X260.848 Y254.709 E0.0126
G1 X254.709 Y260.848 E0.2743
G1 X254.341 Y261.000 E0.0126
G1 X145.659 Y261.000 E3.4340
G1 X145.291 Y260.848 E0.0126
G1 X139.152 Y254.709 E0.2743
G1 X139.000 Y254.341 E0.0126
G1 X139.000 Y145.659 E3.4340
G1 X139.152 Y145.291 E0.0126
G1 X139.294 Y145.150 F7200
G1 X139.491 Y145.518 F18000
G1 X145.518 Y139.491 E0.2693 F7200
G1 X145.738 Y139.400 E0.0075
G1 X254.261 Y139.400 E3.4290
G1 X254.482 Y139.491 E0.0075
G1 X260.509 Y145.518 E0.2693
G1 X260.600 Y145.738 E0.0075
G1 X260.600 Y254.261 E3.4290
G1 X260.509 Y254.482 E0.0075
G1 X254.482 Y260.509 E0.2693
G1 X254.261 Y260.600 E0.0075
G1 X145.738 Y260.600 E3.4290
G1 X145.518 Y260.509 E0.0075
G1 X139.491 Y254.482 E0.2693
G1 X139.400 Y254.261 E0.0075
G1 X139.400 Y145.738 E3.4290
G1 X139.491 Y145.518 E0.0075
G1 X139.633 Y145.377 F7200
G1 X139.830 Y145.745 F18000
G1 X145.745 Y139.830 E0.2643 F7200
G1 X145.818 Y139.800 E0.0025
G1 X254.182 Y139.800 E3.4240
G1 X254.255 Y139.830 E0.0025
G1 X260.170 Y145.745 E0.2643
G1 X260.200 Y145.818 E0.0025
G1 X260.200 Y254.182 E3.4240
G1 X260.170 Y254.255 E0.0025
G1 X254.255 Y260.170 E0.2643
G1 X254.182 Y260.200 E0.0025
G1 X145.818 Y260.200 E3.4240
G1 X145.745 Y260.170 E0.0025
G1 X139.830 Y254.255 E0.2643
G1 X139.800 Y254.182 E0.0025
G1 X139.800 Y145.818 E3.4240
G1 X139.830 Y145.745 E0.0025
G1 E-0.4000 F3600
G1 X139.972 Y145.603 F7200
G1 Z0.300 F1200
; inner perimeter
G1 X150.196 Y150.196 F18000
G1 X150.196 Y237.749 F18000
G1 X151.400 Y248.600 F18000
G1 Z0.200 F1200
G1 E0.4000 F3600
G1 X151.400 Y151.400 E3.0712 F4500
G1 X248.600 Y151.400 E3.0712
G1 X248.600 Y248.600 E3.0712
G1 X151.400 Y248.600 E3.0712
G1 X151.400 Y248.400 F7200
G1 X151.000 Y249.000 F18000
G1 X151.000 Y151.000 E3.0965 F4500
G1 X249.000 Y151.000 E3.0965
G1 X249.000 Y249.000 E3.0965
G1 X151.000 Y249.000 E3.0965
G1 X151.000 Y248.800 F7200
G1 X150.600 Y249.400 F18000
G1 X150.600 Y150.600 E3.1218 F4500
G1 X249.400 Y150.600 E3.1218
G1 X249.400 Y249.400 E3.1218
G1 X150.600 Y249.400 E3.1218
G1 X150.600 Y249.200 F7200
; outer perimeter
M572 D1 S0.15
G1 X150.200 Y249.800 F18000
G1 X150.200 Y150.200 E3.1471 F1800
G1 X249.800 Y150.200 E3.1471
G1 X249.800 Y249.800 E3.1471
G1 X150.200 Y249.800 E3.1471
G1 E-0.4000 F3600
G1 X150.200 Y249.600 F7200
; layer end
G91 ;relative positioning
G1 E-1 F6000 ;retract
G1 X1 Y1 F18000 ;wipe
G1 Z2 ;move up slightly
G1 E-19 ;retract more
G90 ;absolute positioning
G1 X0 Y300 F6000 ; move head out of the way of the print
M400
;M84 ;steppers off
G10 P0 R0 S0 ;turn off e0
G10 P1 R0 S0 ;turn off e1
M140 S0; Set bed to 0C (off)
M107 ;disable parts cooler fan
T0