Bullet64

pi4

Jun 27th, 2019
163
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. pi@raspberrypi:~ $ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 4.19.50-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #895 SMP Thu Jun 20 16:03:42 BST 2019
  4. [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  5. [ 0.000000] CPU: div instructions available: patching division code
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  7. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
  10. [ 0.000000] On node 0 totalpages: 1012736
  11. [ 0.000000] DMA zone: 1728 pages used for memmap
  12. [ 0.000000] DMA zone: 0 pages reserved
  13. [ 0.000000] DMA zone: 196608 pages, LIFO batch:63
  14. [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63
  15. [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
  16. [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
  17. [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  19. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008
  20. [ 0.000000] Kernel command line: 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=DC:A6:32:04:4C:BD vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=0ae29c74-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
  21. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [ 0.000000] Memory: 3735600K/4050944K available (8192K kernel code, 658K rwdata, 2344K rodata, 2048K init, 850K bss, 53200K reserved, 262144K cma-reserved, 3264512K highmem)
  24. [ 0.000000] Virtual kernel memory layout:
  25. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  26. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  27. vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  28. lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  29. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  30. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  31. .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
  32. .init : 0x(ptrval) - 0x(ptrval) (2048 kB)
  33. .data : 0x(ptrval) - 0x(ptrval) ( 659 kB)
  34. .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB)
  35. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  36. [ 0.000000] ftrace: allocating 28034 entries in 83 pages
  37. [ 0.000000] rcu: Hierarchical RCU implementation.
  38. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  39. [ 0.000000] GIC: Using split EOI/Deactivate mode
  40. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  41. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  42. [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  43. [ 0.000021] Switching to timer-based delay loop, resolution 18ns
  44. [ 0.000250] Console: colour dummy device 80x30
  45. [ 0.000744] console [tty1] enabled
  46. [ 0.000798] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
  47. [ 0.000841] pid_max: default: 32768 minimum: 301
  48. [ 0.001116] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [ 0.001149] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [ 0.001924] CPU: Testing write buffer coherency: ok
  51. [ 0.002346] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [ 0.002992] Setting up static identity map for 0x200000 - 0x20003c
  53. [ 0.003168] rcu: Hierarchical SRCU implementation.
  54. [ 0.004038] smp: Bringing up secondary CPUs ...
  55. [ 0.004947] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  56. [ 0.005956] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  57. [ 0.006930] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  58. [ 0.007062] smp: Brought up 1 node, 4 CPUs
  59. [ 0.007131] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  60. [ 0.007154] CPU: All CPU(s) started in HYP mode.
  61. [ 0.007175] CPU: Virtualization extensions available.
  62. [ 0.007989] devtmpfs: initialized
  63. [ 0.017822] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  64. [ 0.018060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  65. [ 0.018103] futex hash table entries: 1024 (order: 4, 65536 bytes)
  66. [ 0.025430] pinctrl core: initialized pinctrl subsystem
  67. [ 0.026309] NET: Registered protocol family 16
  68. [ 0.028871] DMA: preallocated 256 KiB pool for atomic coherent allocations
  69. [ 0.030253] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  70. [ 0.030285] hw-breakpoint: maximum watchpoint size is 8 bytes.
  71. [ 0.030491] Serial: AMBA PL011 UART driver
  72. [ 0.033571] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  73. [ 0.069106] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  74. [ 0.071346] vgaarb: loaded
  75. [ 0.071726] SCSI subsystem initialized
  76. [ 0.071934] usbcore: registered new interface driver usbfs
  77. [ 0.072000] usbcore: registered new interface driver hub
  78. [ 0.072110] usbcore: registered new device driver usb
  79. [ 0.090391] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-06-20 16:04, variant start
  80. [ 0.100118] raspberrypi-firmware soc:firmware: Firmware hash is 407b1da8fa3d1a7108cb1d250f5064a3420d2b7d
  81. [ 0.111515] clocksource: Switched to clocksource arch_sys_counter
  82. [ 0.188661] VFS: Disk quotas dquot_6.6.0
  83. [ 0.188754] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  84. [ 0.188919] FS-Cache: Loaded
  85. [ 0.189109] CacheFiles: Loaded
  86. [ 0.189674] simple-framebuffer 3e887000.framebuffer: framebuffer at 0x3e887000, 0x373800 bytes, mapped to 0x(ptrval)
  87. [ 0.189713] simple-framebuffer 3e887000.framebuffer: format=r5g6b5, mode=1824x984x16, linelength=3648
  88. [ 0.196353] Console: switching to colour frame buffer device 228x61
  89. [ 0.202342] simple-framebuffer 3e887000.framebuffer: fb0: simplefb registered!
  90. [ 0.211408] NET: Registered protocol family 2
  91. [ 0.212131] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  92. [ 0.212214] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  93. [ 0.212332] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  94. [ 0.212448] TCP: Hash tables configured (established 8192 bind 8192)
  95. [ 0.212616] UDP hash table entries: 512 (order: 2, 16384 bytes)
  96. [ 0.212691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  97. [ 0.213032] NET: Registered protocol family 1
  98. [ 0.213611] RPC: Registered named UNIX socket transport module.
  99. [ 0.213669] RPC: Registered udp transport module.
  100. [ 0.213715] RPC: Registered tcp transport module.
  101. [ 0.213760] RPC: Registered tcp NFSv4.1 backchannel transport module.
  102. [ 0.213821] PCI: CLS 0 bytes, default 64
  103. [ 0.216786] Initialise system trusted keyrings
  104. [ 0.217006] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  105. [ 0.225816] FS-Cache: Netfs 'nfs' registered for caching
  106. [ 0.226368] NFS: Registering the id_resolver key type
  107. [ 0.226438] Key type id_resolver registered
  108. [ 0.226482] Key type id_legacy registered
  109. [ 0.226534] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  110. [ 0.228787] Key type asymmetric registered
  111. [ 0.228837] Asymmetric key parser 'x509' registered
  112. [ 0.228985] bounce: pool size: 64 pages
  113. [ 0.229057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  114. [ 0.229268] io scheduler noop registered
  115. [ 0.229312] io scheduler deadline registered (default)
  116. [ 0.231238] io scheduler cfq registered
  117. [ 0.233040] io scheduler mq-deadline registered (default)
  118. [ 0.234798] io scheduler kyber registered
  119. [ 0.266278] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
  120. [ 0.268087] brcm-pcie fd500000.pcie: could not get clock
  121. [ 0.269880] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  122. [ 0.271694] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
  123. [ 0.331551] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
  124. [ 0.333557] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  125. [ 0.335297] pci_bus 0000:00: root bus resource [bus 00-01]
  126. [ 0.337014] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  127. [ 0.338795] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  128. [ 0.338933] pci 0000:00:00.0: PME# supported from D0 D3hot
  129. [ 0.341628] PCI: bus0: Fast back to back transfers disabled
  130. [ 0.343400] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  131. [ 0.345341] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  132. [ 0.345401] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  133. [ 0.345569] pci 0000:01:00.0: PME# supported from D0 D3cold
  134. [ 0.348145] PCI: bus1: Fast back to back transfers disabled
  135. [ 0.349956] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
  136. [ 0.350003] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  137. [ 0.351870] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  138. [ 0.353705] pci 0000:00:00.0: PCI bridge to [bus 01]
  139. [ 0.355493] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  140. [ 0.357316] pci 0000:00:00.0: enabling device (0140 -> 0142)
  141. [ 0.359096] pci 0000:01:00.0: enabling device (0140 -> 0142)
  142. [ 0.364029] iproc-rng200 fe104000.rng: hwrng registered
  143. [ 0.365988] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  144. [ 0.368228] vc-sm: Videocore shared memory driver
  145. [ 0.370360] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  146. [ 0.382242] brd: module loaded
  147. [ 0.393636] loop: module loaded
  148. [ 0.396140] Loading iSCSI transport class v2.0-870.
  149. [ 0.399497] libphy: Fixed MDIO Bus: probed
  150. [ 0.401692] bcmgenet fd580000.genet: failed to get enet clock
  151. [ 0.403417] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
  152. [ 0.405115] bcmgenet fd580000.genet: failed to get enet-wol clock
  153. [ 0.406790] bcmgenet fd580000.genet: failed to get enet-eee clock
  154. [ 0.408676] unimac-mdio unimac-mdio.-19: DMA mask not set
  155. [ 0.421578] libphy: bcmgenet MII bus: probed
  156. [ 0.462042] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
  157. [ 0.464578] usbcore: registered new interface driver r8152
  158. [ 0.466287] usbcore: registered new interface driver lan78xx
  159. [ 0.467962] usbcore: registered new interface driver smsc95xx
  160. [ 0.469826] xhci_hcd 0000:01:00.0: xHCI Host Controller
  161. [ 0.471464] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  162. [ 0.474875] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
  163. [ 0.476703] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 55
  164. [ 0.478991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  165. [ 0.480704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  166. [ 0.482425] usb usb1: Product: xHCI Host Controller
  167. [ 0.484101] usb usb1: Manufacturer: Linux 4.19.50-v7l+ xhci-hcd
  168. [ 0.485778] usb usb1: SerialNumber: 0000:01:00.0
  169. [ 0.487971] hub 1-0:1.0: USB hub found
  170. [ 0.489688] hub 1-0:1.0: 1 port detected
  171. [ 0.491768] xhci_hcd 0000:01:00.0: xHCI Host Controller
  172. [ 0.493445] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  173. [ 0.495122] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  174. [ 0.497124] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  175. [ 0.498811] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  176. [ 0.500480] usb usb2: Product: xHCI Host Controller
  177. [ 0.502168] usb usb2: Manufacturer: Linux 4.19.50-v7l+ xhci-hcd
  178. [ 0.503848] usb usb2: SerialNumber: 0000:01:00.0
  179. [ 0.506003] hub 2-0:1.0: USB hub found
  180. [ 0.507714] hub 2-0:1.0: 4 ports detected
  181. [ 0.510445] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  182. [ 0.537695] dwc_otg fe980000.usb: base=(ptrval)
  183. [ 0.739652] Core Release: 2.80a
  184. [ 0.741306] Setting default values for core params
  185. [ 0.742984] Finished setting default values for core params
  186. [ 0.944953] Using Buffer DMA mode
  187. [ 0.946592] Periodic Transfer Interrupt Enhancement - disabled
  188. [ 0.948229] Multiprocessor Interrupt Enhancement - disabled
  189. [ 0.949843] OTG VER PARAM: 0, OTG VER FLAG: 0
  190. [ 0.951481] Dedicated Tx FIFOs mode
  191. [ 0.953493] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = dec70000 dma = 0x00000000dec70000 len=9024
  192. [ 0.955138] FIQ FSM acceleration enabled for :
  193. Non-periodic Split Transactions
  194. Periodic Split Transactions
  195. High-Speed Isochronous Endpoints
  196. Interrupt/Control Split Transaction hack enabled
  197. [ 0.963183] dwc_otg: Microframe scheduler enabled
  198. [ 0.963250] WARN::hcd_init_fiq:457: FIQ on core 1
  199. [ 0.964893] WARN::hcd_init_fiq:458: FIQ ASM at c07add50 length 36
  200. [ 0.966512] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200
  201. [ 0.968134] dwc_otg fe980000.usb: DWC OTG Controller
  202. [ 0.969742] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
  203. [ 0.971354] dwc_otg fe980000.usb: irq 36, io mem 0x00000000
  204. [ 0.972997] Init: Port Power? op_state=1
  205. [ 0.974575] Init: Power Port (0)
  206. [ 0.976404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  207. [ 0.978028] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  208. [ 0.979643] usb usb3: Product: DWC OTG Controller
  209. [ 0.981253] usb usb3: Manufacturer: Linux 4.19.50-v7l+ dwc_otg_hcd
  210. [ 0.982912] usb usb3: SerialNumber: fe980000.usb
  211. [ 0.985041] hub 3-0:1.0: USB hub found
  212. [ 0.986704] hub 3-0:1.0: 1 port detected
  213. [ 0.988875] dwc_otg: FIQ enabled
  214. [ 0.988884] dwc_otg: NAK holdoff enabled
  215. [ 0.988893] dwc_otg: FIQ split-transaction FSM enabled
  216. [ 0.988906] Module dwc_common_port init
  217. [ 0.989129] usbcore: registered new interface driver uas
  218. [ 0.990826] usbcore: registered new interface driver usb-storage
  219. [ 0.992626] mousedev: PS/2 mouse device common for all mice
  220. [ 0.995424] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  221. [ 0.997244] bcm2835-cpufreq: min=600000 max=1500000
  222. [ 0.999452] sdhci: Secure Digital Host Controller Interface driver
  223. [ 1.001070] sdhci: Copyright(c) Pierre Ossman
  224. [ 1.003060] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  225. [ 1.005021] sdhci-pltfm: SDHCI platform and OF driver helper
  226. [ 1.009560] ledtrig-cpu: registered to indicate activity on CPUs
  227. [ 1.011311] hidraw: raw HID events driver (C) Jiri Kosina
  228. [ 1.013118] usbcore: registered new interface driver usbhid
  229. [ 1.014730] usbhid: USB HID core driver
  230. [ 1.017038] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  231. [ 1.020277] [vc_sm_connected_init]: start
  232. [ 1.029107] [vc_sm_connected_init]: end - returning 0
  233. [ 1.031735] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  234. [ 1.033382] [vc_sm_connected_init]: start
  235. [ 1.035310] [vc_sm_connected_init]: installed successfully
  236. [ 1.037221] Initializing XFRM netlink socket
  237. [ 1.038836] NET: Registered protocol family 17
  238. [ 1.040504] Key type dns_resolver registered
  239. [ 1.042444] Registering SWP/SWPB emulation handler
  240. [ 1.044643] registered taskstats version 1
  241. [ 1.046256] Loading compiled-in X.509 certificates
  242. [ 1.055575] uart-pl011 fe201000.serial: cts_event_workaround enabled
  243. [ 1.057256] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
  244. [ 1.061948] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  245. [ 1.064156] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
  246. [ 1.066445] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  247. [ 1.068123] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  248. [ 1.094687] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
  249. [ 1.111565] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  250. [ 1.116200] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  251. [ 1.119494] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  252. [ 1.122738] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  253. [ 1.127207] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  254. [ 1.128823] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  255. [ 1.131858] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  256. [ 1.132810] of_cfs_init
  257. [ 1.135226] of_cfs_init: OK
  258. [ 1.137410] Waiting for root device PARTUUID=0ae29c74-02...
  259. [ 1.183871] random: fast init done
  260. [ 1.234656] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
  261. [ 1.239051] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
  262. [ 1.242272] mmcblk0: p1 p2
  263. [ 1.245204] mmc1: new high speed SDIO card at address 0001
  264. [ 1.253864] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  265. [ 1.255517] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  266. [ 1.274335] EXT4-fs (mmcblk0p2): recovery complete
  267. [ 1.278110] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  268. [ 1.279799] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  269. [ 1.287078] devtmpfs: mounted
  270. [ 1.293410] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
  271. [ 1.295179] Freeing unused kernel memory: 2048K
  272. [ 1.296861] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  273. [ 1.298561] usb 1-1: Product: USB2.0 Hub
  274. [ 1.301784] hub 1-1:1.0: USB hub found
  275. [ 1.303656] hub 1-1:1.0: 4 ports detected
  276. [ 1.331790] Run /sbin/init as init process
  277. [ 1.713070] systemd[1]: System time before build time, advancing clock.
  278. [ 1.802876] NET: Registered protocol family 10
  279. [ 1.805790] Segment Routing with IPv6
  280. [ 1.834331] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  281. [ 1.838626] systemd[1]: Detected architecture arm.
  282. [ 1.857320] systemd[1]: Set hostname to <raspberrypi>.
  283. [ 2.126701] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  284. [ 2.128679] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  285. [ 2.446951] random: systemd: uninitialized urandom read (16 bytes read)
  286. [ 2.456780] random: systemd: uninitialized urandom read (16 bytes read)
  287. [ 2.459219] systemd[1]: Listening on udev Kernel Socket.
  288. [ 2.464653] random: systemd: uninitialized urandom read (16 bytes read)
  289. [ 2.470602] systemd[1]: Created slice User and Session Slice.
  290. [ 2.475787] systemd[1]: Reached target Slices.
  291. [ 2.481062] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  292. [ 2.486562] systemd[1]: Listening on initctl Compatibility Named Pipe.
  293. [ 3.198929] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  294. [ 3.290232] systemd-journald[108]: Received request to flush runtime journal from PID 1
  295. [ 3.762216] argon-mem feb00000.hevc-decoder: argon-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
  296. [ 3.762608] argon-mem feb10000.argon-local-intc: argon-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
  297. [ 3.762947] argon-mem feb20000.h264-decoder: argon-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
  298. [ 3.763485] argon-mem feb30000.vp9-decoder: argon-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
  299. [ 3.787104] media: Linux media interface: v0.10
  300. [ 3.816893] videodev: Linux video capture interface: v2.00
  301. [ 3.850808] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  302. [ 3.878864] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  303. [ 3.904276] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  304. [ 3.904290] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  305. [ 3.917019] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  306. [ 3.917034] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  307. [ 3.924037] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  308. [ 3.924052] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  309. [ 3.973066] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  310. [ 3.988705] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  311. [ 4.067920] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  312. [ 4.086422] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  313. [ 4.110788] brcmfmac: F1 signature read @0x18000000=0x15264345
  314. [ 4.121727] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  315. [ 4.122120] usbcore: registered new interface driver brcmfmac
  316. [ 4.154165] bcm2835_audio soc:audio: card created with 8 channels
  317. [ 4.281313] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
  318. [ 4.341470] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  319. [ 4.354822] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  320. [ 4.360555] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  321. [ 4.360575] checking generic (3e887000 373800) vs hw (0 ffffffffffffffff)
  322. [ 4.360589] fb: switching to vc4drmfb from simple
  323. [ 4.360834] Console: switching to colour dummy device 80x30
  324. [ 4.393904] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
  325. [ 4.393919] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  326. [ 4.393928] [drm] No driver support for vblank timestamp query.
  327. [ 4.393937] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  328. [ 5.807489] Console: switching to colour frame buffer device 240x67
  329. [ 15.831642] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:43:crtc-0] flip_done timed out
  330. [ 15.850681] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
  331. [ 17.443139] 8021q: 802.1Q VLAN Support v1.8
  332. [ 17.460125] uart-pl011 fe201000.serial: no DMA platform data
  333. [ 17.460646] random: crng init done
  334. [ 17.460656] random: 7 urandom warning(s) missed due to ratelimiting
  335. [ 17.658094] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
  336. [ 17.718201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  337. [ 17.718213] brcmfmac: power management disabled
  338. [ 18.031851] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
  339. [ 18.032144] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  340. [ 19.111804] bcmgenet fd580000.genet eth0: Link is Down
  341. [ 23.271808] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  342. [ 23.271844] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  343. [ 24.105281] Bluetooth: Core ver 2.22
  344. [ 24.105357] NET: Registered protocol family 31
  345. [ 24.105367] Bluetooth: HCI device and connection manager initialized
  346. [ 24.105388] Bluetooth: HCI socket layer initialized
  347. [ 24.105403] Bluetooth: L2CAP socket layer initialized
  348. [ 24.105447] Bluetooth: SCO socket layer initialized
  349. [ 24.118431] Bluetooth: HCI UART driver ver 2.3
  350. [ 24.118445] Bluetooth: HCI UART protocol H4 registered
  351. [ 24.118524] Bluetooth: HCI UART protocol Three-wire (H5) registered
  352. [ 24.118752] Bluetooth: HCI UART protocol Broadcom registered
  353. [ 24.317091] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  354. [ 24.317098] Bluetooth: BNEP filters: protocol multicast
  355. [ 24.317108] Bluetooth: BNEP socket layer initialized
  356. [ 27.351648] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:43:crtc-0] flip_done timed out
  357. [ 37.591646] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:45:HDMI-A-1] flip_done timed out
  358. [ 47.831636] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [PLANE:28:plane-0] flip_done timed out
  359. [ 58.071645] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:43:crtc-0] flip_done timed out
RAW Paste Data