Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2011.06 (Feb 22 2012 - 04:24:47)
- Promwad-PlugComputer
- SoC: Kirkwood 88F6282_?? RevID 0x01
- DRAM: 1 GiB
- NAND: 1024 MiB
- In: serial
- Out: serial
- Err: serial
- Net: egiga0, egiga1
- 88E1121 Initialized on egiga0, devadr 1
- 88E1121 Initialized on egiga1, devadr 0
- Hit any key to stop autoboot: 0
- Marvell>> printenv
- baudrate=115200
- bootargs=console=ttyS0,115200 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
- bootcmd=usb start; if run x_usbcmd_kernel; then setenv bootargs ${x_bootargs} ${x_usbarg_root}; else run x_bootcmd_kernel; setenv bootargs ${x_bootargs} ${x_bootargs_root}; fi; bootm 0x6400000;
- bootdelay=3
- eth1addr=00:E1:75:82:1B:07
- ethact=egiga0
- ethaddr=00:E1:75:82:1B:06
- filesize=A280000
- ipaddr=192.168.86.210
- serverip=192.168.10.150
- stderr=serial
- stdin=serial
- stdout=serial
- x_bootargs=console=ttyS0,115200
- x_bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs
- x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x4daa18
- x_usbarg_root=root=/dev/sda1 ubi.mtd=3 rw noinitrd rootdelay=5 rootfstype=ext3 rootwait usbcore.authorized_default=1
- x_usbcmd_kernel=ext2load usb 0 0x6400000 /boot/uImage
- Environment size: 825/262140 bytes
- Marvell>> bdinfo
- arch_number = 0x00000D54
- boot_params = 0x00000100
- DRAM bank = 0x00000000
- -> start = 0x00000000
- -> size = 0x20000000
- DRAM bank = 0x00000001
- -> start = 0x20000000
- -> size = 0x20000000
- ethaddr = 00:E1:75:82:1B:06
- ip_addr = 192.168.86.210
- baudrate = 115200 bps
- TLB addr = 0x3FFF0000
- relocaddr = 0x3FF77000
- reloc off = 0x3F977000
- irq_sp = 0x3FE36F68
- sp start = 0x3FE36F58
- FB base = 0x00000000
- Marvell>> ping 192.168.86.1
- Using egiga0 device
- host 192.168.86.1 is alive
- Marvell>> boot
- (Re)start USB...
- USB: Register 10011 NbrPorts 1
- USB EHCI 1.00
- scanning bus for devices... 4 USB Device(s) found
- scanning bus for storage devices... 1 Storage Device(s) found
- Loading file "/boot/uImage" from usb device 0:1 (usbda1)
- 5447359 bytes read
- ## Booting kernel from Legacy Image at 06400000 ...
- Image Name: Linux-5.13.6-kirkwood-tld-1
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 5447295 Bytes = 5.2 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000][ T0] Booting Linux on physical CPU 0x0
- [ 0.000000][ T0] Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
- [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
- [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000][ T0] OF: fdt: Machine model: Promwad WTPlug Reference Board
- [ 0.000000][ T0] Memory policy: Data cache writeback
- [ 0.000000][ T0] Zone ranges:
- [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Movable zone start for each node
- [ 0.000000][ T0] Early memory node ranges
- [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
- [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 260096
- [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=/dev/sda1 ubi.mtd=3 rw noinitrd rootdelay=5 rootfstype=ext3 rootwait usbcore.authorized_default=1
- [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000][ T0] Memory: 1020216K/1048576K available (11264K kernel code, 1553K rwdata, 4272K rodata, 1024K init, 309K bss, 28360K reserved, 0K cma-reserved)
- [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x408/0x7b4 with crng_init=0
- [ 0.000000][ T0] trace event string verifier disabled
- [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
- [ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
- [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000002][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
- [ 0.000050][ T0] Switching to timer-based delay loop, resolution 5ns
- [ 0.000929][ T0] Console: colour dummy device 80x30
- [ 0.000989][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
- [ 0.001022][ T0] pid_max: default: 32768 minimum: 301
- [ 0.001404][ T0] LSM: Security Framework initializing
- [ 0.001556][ T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.001594][ T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.002868][ T0] CPU: Testing write buffer coherency: ok
- [ 0.004438][ T1] Setting up static identity map for 0x100000 - 0x100058
- [ 0.004736][ T1] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
- [ 0.004962][ T1] rcu: Hierarchical SRCU implementation.
- [ 0.006324][ T1] devtmpfs: initialized
- [ 0.011959][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.012007][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.056816][ T1] prandom32: self test passed (less than 6 bits correlated)
- [ 0.056850][ T1] prandom: seed boundary self test passed
- [ 0.061909][ T1] prandom: 100 self tests passed
- [ 0.061929][ T1] pinctrl core: initialized pinctrl subsystem
- [ 0.063216][ T1] NET: Registered protocol family 16
- [ 0.064196][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.065085][ T1] audit: initializing netlink subsys (disabled)
- [ 0.066144][ T1] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.066422][ T16] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
- [ 0.066540][ T1] cpuidle: using governor ladder
- [ 0.066600][ T1] cpuidle: using governor menu
- [ 0.067263][ T1] [Firmware Bug]: Feroceon L2: bootloader left the L2 cache on!
- [ 0.067288][ T1] Feroceon L2: Cache support initialised.
- [ 0.079601][ T1] No ATAGs?
- [ 2.560061][ C0] random: fast init done
- [ 5.916845][ T39] "cryptomgr_test" (39) uses obsolete ecb(arc4) skcipher
- [ 5.947508][ T59] wait_for_initramfs() called before rootfs_initcalls
- [ 6.140142][ T1] raid6: int32x8 gen() 93 MB/s
- [ 6.310283][ T1] raid6: int32x8 xor() 57 MB/s
- [ 6.480222][ T1] raid6: int32x4 gen() 90 MB/s
- [ 6.650213][ T1] raid6: int32x4 xor() 59 MB/s
- [ 6.820245][ T1] raid6: int32x2 gen() 116 MB/s
- [ 6.990214][ T1] raid6: int32x2 xor() 71 MB/s
- [ 7.160063][ T1] raid6: int32x1 gen() 82 MB/s
- [ 7.330127][ T1] raid6: int32x1 xor() 50 MB/s
- [ 7.330150][ T1] raid6: using algorithm int32x2 gen() 116 MB/s
- [ 7.330167][ T1] raid6: .... xor() 71 MB/s, rmw enabled
- [ 7.330182][ T1] raid6: using intx1 recovery algorithm
- [ 7.330490][ T1] vgaarb: loaded
- [ 7.331159][ T1] SCSI subsystem initialized
- [ 7.331813][ T1] usbcore: registered new interface driver usbfs
- [ 7.331902][ T1] usbcore: registered new interface driver hub
- [ 7.331972][ T1] usbcore: registered new device driver usb
- [ 7.332241][ T1] pps_core: LinuxPPS API ver. 1 registered
- [ 7.332263][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 7.332306][ T1] PTP clock support registered
- [ 7.334679][ T1] clocksource: Switched to clocksource orion_clocksource
- [ 7.455441][ T1] VFS: Disk quotas dquot_6.6.0
- [ 7.455567][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 7.479838][ T1] NET: Registered protocol family 2
- [ 7.480132][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 7.482257][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 7.482344][ T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 7.482500][ T1] TCP bind hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 7.482624][ T1] TCP: Hash tables configured (established 8192 bind 8192)
- [ 7.482975][ T1] MPTCP token hash table entries: 1024 (order: 1, 12288 bytes, linear)
- [ 7.483091][ T1] UDP hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 7.483157][ T1] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 7.483448][ T1] NET: Registered protocol family 1
- [ 7.484343][ T1] RPC: Registered named UNIX socket transport module.
- [ 7.484372][ T1] RPC: Registered udp transport module.
- [ 7.484388][ T1] RPC: Registered tcp transport module.
- [ 7.484402][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 7.484423][ T1] PCI: CLS 0 bytes, default 32
- [ 7.484853][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 9.269211][ T1] Initialise system trusted keyrings
- [ 9.269295][ T1] Key type blacklist registered
- [ 9.269614][ T1] workingset: timestamp_bits=30 max_order=18 bucket_order=0
- [ 9.269780][ T1] zbud: loaded
- [ 9.271528][ T1] NFS: Registering the id_resolver key type
- [ 9.271583][ T1] Key type id_resolver registered
- [ 9.271602][ T1] Key type id_legacy registered
- [ 9.271660][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 9.271691][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 9.271711][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 9.272043][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 9.272605][ T1] fuse: init (API version 7.34)
- [ 9.273093][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
- [ 9.273362][ T1] orangefs_init: module version upstream loaded
- [ 9.273388][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
- [ 9.396171][ T1] xor: measuring software checksum speed
- [ 9.406895][ T1] arm4regs : 928 MB/sec
- [ 9.424664][ T1] 8regs : 556 MB/sec
- [ 9.436948][ T1] 32regs : 810 MB/sec
- [ 9.436971][ T1] xor: using function: arm4regs (928 MB/sec)
- [ 9.436998][ T1] async_tx: api initialized (async)
- [ 9.437022][ T1] Key type asymmetric registered
- [ 9.437039][ T1] Asymmetric key parser 'x509' registered
- [ 9.437114][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 9.437207][ T1] io scheduler bfq registered
- [ 9.676916][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
- [ 9.679696][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
- [ 9.735994][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 9.739069][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
- [ 9.795994][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 9.799429][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 9.801094][ T1] printk: console [ttyS0] disabled
- [ 9.801210][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A
- [ 10.647500][ T1] printk: console [ttyS0] enabled
- [ 10.653413][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 12500000) is a 16550A
- [ 10.673791][ T1] loop: module loaded
- [ 10.678454][ T1] sata_mv f1080000.sata: slots 32 ports 1
- [ 10.686676][ T1] scsi host0: sata_mv
- [ 10.690884][ T1] ata1: SATA max UDMA/133 irq 34
- [ 10.696890][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
- [ 10.704056][ T1] nand: Samsung NAND 1GiB 3,3V 8-bit
- [ 10.709262][ T1] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 10.718048][ T1] Scanning device for bad blocks
- [ 10.817188][ T1] Bad eraseblock 1045 at 0x0000082a0000
- [ 10.874915][ T1] Bad eraseblock 1625 at 0x00000cb20000
- [ 11.019278][ T1] Bad eraseblock 3159 at 0x000018ae0000
- [ 11.024769][ T94] ata1: SATA link down (SStatus 0 SControl F300)
- [ 11.139215][ T1] Bad eraseblock 4359 at 0x0000220e0000
- [ 11.145159][ T1] Bad eraseblock 4365 at 0x0000221a0000
- [ 11.415629][ T1] Bad eraseblock 7305 at 0x000039120000
- [ 11.491146][ T1] Bad eraseblock 8082 at 0x00003f240000
- [ 11.506507][ T1] 6 fixed-partitions partitions found on MTD device orion_nand
- [ 11.513954][ T1] Creating 6 MTD partitions on "orion_nand":
- [ 11.519854][ T1] 0x000000000000-0x0000001c0000 : "uboot"
- [ 11.527380][ T1] 0x0000001c0000-0x000000480000 : "env"
- [ 11.534582][ T1] 0x000000480000-0x0000005e0000 : "test"
- [ 11.541893][ T1] 0x0000005e0000-0x000000b20000 : "conf"
- [ 11.549223][ T1] 0x000000b20000-0x000004860000 : "linux"
- [ 11.556967][ T1] 0x000004860000-0x000010000000 : "user"
- [ 11.565892][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
- [ 11.574480][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 11.586342][ T1] libphy: Fixed MDIO Bus: probed
- [ 11.592982][ T1] libphy: orion_mdio_bus: probed
- [ 11.601233][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
- [ 11.686203][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:e1:75:82:1b:06
- [ 11.776138][ T1] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:e1:75:82:1b:07
- [ 11.785820][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 11.793122][ T1] ehci-pci: EHCI PCI platform driver
- [ 11.798395][ T1] ehci-orion: EHCI orion driver
- [ 11.803363][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
- [ 11.809659][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
- [ 11.818343][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
- [ 11.854722][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
- [ 11.861852][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
- [ 11.870907][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 11.878904][ T1] usb usb1: Product: EHCI Host Controller
- [ 11.884511][ T1] usb usb1: Manufacturer: Linux 5.13.6-kirkwood-tld-1 ehci_hcd
- [ 11.891973][ T1] usb usb1: SerialNumber: f1050000.ehci
- [ 11.898257][ T1] hub 1-0:1.0: USB hub found
- [ 11.902786][ T1] hub 1-0:1.0: 1 port detected
- [ 11.908428][ T1] usbcore: registered new interface driver usb-storage
- [ 11.915737][ T1] mousedev: PS/2 mouse device common for all mice
- [ 11.923283][ T1] rtc-mv f1010300.rtc: registered as rtc0
- [ 11.929031][ T1] rtc-mv f1010300.rtc: setting system clock to 2022-11-06T21:52:35 UTC (1667771555)
- [ 11.938702][ T1] i2c /dev entries driver
- [ 11.944937][ T1] device-mapper: uevent: version 1.0.3
- [ 11.950610][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
- [ 11.960344][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
- [ 11.967690][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
- [ 11.975081][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
- [ 11.982508][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
- [ 11.989363][ T1] device-mapper: raid: Loading target version 1.15.1
- [ 11.997906][ T1] hid: raw HID events driver (C) Jiri Kosina
- [ 12.004234][ T1] drop_monitor: Initializing network drop monitor service
- [ 12.011864][ T1] NET: Registered protocol family 10
- [ 12.018885][ T1] Segment Routing with IPv6
- [ 12.023281][ T1] RPL Segment Routing with IPv6
- [ 12.028228][ T1] NET: Registered protocol family 17
- [ 12.033683][ T1] Key type dns_resolver registered
- [ 12.039570][ T1] registered taskstats version 1
- [ 12.044407][ T1] Loading compiled-in X.509 certificates
- [ 12.050654][ T1] zswap: loaded using pool lzo/zbud
- [ 12.056238][ T1] Key type ._fscrypt registered
- [ 12.060978][ T1] Key type .fscrypt registered
- [ 12.065715][ T1] Key type fscrypt-provisioning registered
- [ 12.073772][ T1] Key type big_key registered
- [ 12.083208][ T1] Key type encrypted registered
- [ 12.091486][ T1] ubi0: attaching mtd3
- [ 12.102932][ T1] ubi0: scanning is finished
- [ 12.117782][ T1] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 38, need 160
- [ 12.129386][ T1] ubi0: attached mtd3 (name "conf", size 5 MiB)
- [ 12.135605][ T1] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
- [ 12.143224][ T1] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
- [ 12.150704][ T1] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
- [ 12.158259][ T1] ubi0: good PEBs: 42, bad PEBs: 0, corrupted PEBs: 0
- [ 12.164940][ T1] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
- [ 12.172905][ T1] ubi0: max/mean erase counter: 1/1, WL threshold: 4096, image sequence number: 3322921700
- [ 12.182817][ T1] ubi0: available PEBs: 0, total reserved PEBs: 42, PEBs reserved for bad PEB handling: 38
- [ 12.192735][ T111] ubi0: background thread "ubi_bgt0d" started, PID 111
- [ 12.199537][ T102] usb 1-1: new high-speed USB device number 2 using orion-ehci
- [ 12.207578][ T1] Waiting 5 sec before mounting root device...
- [ 12.405240][ T102] usb 1-1: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00
- [ 12.414193][ T102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 12.422973][ T102] hub 1-1:1.0: USB hub found
- [ 12.427604][ T102] hub 1-1:1.0: 4 ports detected
- [ 12.744719][ T102] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
- [ 12.895361][ T102] usb 1-1.2: New USB device found, idVendor=2001, idProduct=f103, bcdDevice= 1.00
- [ 12.904489][ T102] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 12.913484][ T102] hub 1-1.2:1.0: USB hub found
- [ 12.918357][ T102] hub 1-1.2:1.0: 7 ports detected
- [ 13.644716][ T17] usb 1-1.2.4: new high-speed USB device number 4 using orion-ehci
- [ 13.795982][ T17] usb 1-1.2.4: New USB device found, idVendor=0781, idProduct=5571, bcdDevice= 1.00
- [ 13.805302][ T17] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 13.813568][ T17] usb 1-1.2.4: Product: Cruzer Fit
- [ 13.818588][ T17] usb 1-1.2.4: Manufacturer: SanDisk
- [ 13.823761][ T17] usb 1-1.2.4: SerialNumber: 000
- [ 13.831098][ T17] usb-storage 1-1.2.4:1.0: USB Mass Storage device detected
- [ 13.839026][ T17] scsi host1: usb-storage 1-1.2.4:1.0
- [ 14.886227][ T7] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Fit 1.00 PQ: 0 ANSI: 6
- [ 14.897043][ T81] sd 1:0:0:0: [sda] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
- [ 14.906771][ T81] sd 1:0:0:0: [sda] Write Protect is off
- [ 14.913020][ T81] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 14.932542][ T81] sda: sda1
- [ 14.939525][ T81] sd 1:0:0:0: [sda] Attached SCSI removable disk
- [ 17.284723][ T1] md: Waiting for all devices to be available before autodetect
- [ 17.292253][ T1] md: If you don't use raid, use raid=noautodetect
- [ 17.298818][ T1] md: Autodetecting RAID arrays.
- [ 17.303642][ T1] md: autorun ...
- [ 17.307177][ T1] md: ... autorun DONE.
- [ 17.313049][ T1] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
- [ 17.378332][ T1] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
- [ 17.388580][ T1] VFS: Mounted root (ext3 filesystem) on device 8:1.
- [ 17.404751][ T1] devtmpfs: mounted
- [ 17.412004][ T1] Freeing unused kernel memory: 1024K
- [ 17.418443][ T1] Checked W+X mappings: passed, no W+X pages found
- [ 17.424912][ T1] Run /sbin/init as init process
- INIT: version 2.96 booting
- Using makefile-style concurrent boot in runlevel S.
- Files under mount point '/run' will be hidden. ... (warning).
- Starting hotplug events dispatcher: systemd-udevd.
- Synthesizing the initial hotplug events (subsystems)...done.
- Synthesizing the initial hotplug events (devices)...done.
- Waiting for /dev to be fully populated...[ 20.404400][ T289] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 20.854217][ T289] at24 1-0050: supply vcc not found, using dummy regulator
- [ 20.935977][ T291] orion_wdt: Initial timeout 21 sec
- [ 21.511724][ T289] usbcore: registered new interface driver uas
- [ 21.660936][ T294] marvell-cesa f1030000.crypto: CESA device successfully registered
- [ 21.695364][ T289] sd 1:0:0:0: Attached scsi generic sg0 type 0
- done.
- Setting hostname to 'debian'...done.
- [ 22.748600][ C0] random: crng init done
- Activating swap:.
- [ 23.124278][ T457] EXT4-fs (sda1): re-mounted. Opts: (null). Quota mode: none.
- Will now check root file system:[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda1
- e2fsck 1.46.2 (28-Feb-2021)
- rootfs: clean, 17644/977280 files, 283323/3907328 blocks
- .
- [ 23.547235][ T469] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro. Quota mode: none.
- Will now check all file systems.
- Checking all file systems.
- LABEL=rootfs is mounted
- Done checking file systems.
- Log is being saved in /var/log/fsck/checkfs if that location is writable.
- Cleaning up temporary files...Cleaning /tmp...done.
- /tmp.
- Will now mount local filesystems:.
- Will now activate swapfile swap, if any:done.
- Checking minimum space in /tmp...done.
- Cleaning up temporary files....
- Initializing random number generator...done.
- Starting Setting kernel variables: sysctl.
- Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
- Copyright 2004-2018 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Listening on LPF/eth0/00:e1:75:82:1b:06
- Sending on LPF/eth0/00:e1:75:82:1b:06
- Sending on Socket/fallback
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
- [ 29.748289][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
- [ 29.758984][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
- DHCPOFFER of 192.168.86.216 from 192.168.86.1
- DHCPREQUEST for 192.168.86.216 on eth0 to 255.255.255.255 port 67
- DHCPACK of 192.168.86.216 from 192.168.86.1
- bound to 192.168.86.216 -- renewal in 19027 seconds.
- done.
- Starting RPC port mapper daemon: rpcbind.
- Starting NFS common utilities: statd idmapd.
- Cleaning up temporary files....
- INIT: Entering runlevel: 2
- Using makefile-style concurrent boot in runlevel 2.
- Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
- 1022 (syslogd)
- .
- Starting NFS common utilities: statd idmapd.
- Starting system message bus: dbus.
- Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- Not starting NFS kernel daemon: no exports. ... (warning).
- Starting NTP server: ntpd.
- Starting OpenBSD Secure Shell server: sshd.
- Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
- 1065 (klogd)
- .
- Running local boot scripts (/etc/rc.local)
- .
- Debian GNU/Linux 11 debian ttyS0
- debian login: root
- Password:
- Linux debian 5.13.6-kirkwood-tld-1 #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021 armv5tel
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- Last login: Sun Nov 6 10:20:51 PST 2022 on ttyS0
- debian
- 192.168.86.21
- Promwad WTPlug Reference Board
- Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021
- Debian 11.5
- Sun Nov 6 13:53:11 PST 2022 up 0 minutes
- root@debian:~# ping ya.ru
- PING ya.ru(ya.ru (2a02:6b8::2:242)) 56 data bytes
- 64 bytes from ya.ru (2a02:6b8::2:242): icmp_seq=1 ttl=55 time=7.28 ms
- 64 bytes from ya.ru (2a02:6b8::2:242): icmp_seq=2 ttl=55 time=6.05 ms
- 64 bytes from ya.ru (2a02:6b8::2:242): icmp_seq=3 ttl=55 time=5.96 ms
- ^C
- --- ya.ru ping statistics ---
- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms
- rtt min/avg/max/mdev = 5.955/6.428/7.276/0.600 ms
- root@debian:~# poweroff
- Broadcast message from root@debian (ttyS0) (Sun Nov 6 13:53:28 2022):
- The system is going down for system halt NOW!
- INIT: Sending prUsing makefile-style concurrent boot in runlevel 0.
- Stopping hotplug events dispatcher: systemd-udevd.
- Stopping busybox' klogd implementation: klogd1065 (klogd)
- Stopped klogd (pid 1065).
- .
- Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
- Stopping NFS kernel daemon: mountd nfsd.
- Unexporting directories for NFS kernel daemon....
- Saving random seed...done.
- Stopping busybox' syslogd implementation: syslogd1022 (syslogd)
- .
- Asking all remaining processes to terminate...done.
- All processes ended within 1 seconds...done.
- Stopping RPC port mapper daemon: rpcbind.
- Stopping NFS common utilities: idmapd statd.
- Deconfiguring network interfaces...Removed stale PID file
- Internet Systems Consortium DHCP Client 4.4.1
- Copyright 2004-2018 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Listening on LPF/eth0/00:e1:75:82:1b:06
- Sending on LPF/eth0/00:e1:75:82:1b:06
- Sending on Socket/fallback
- DHCPRELEASE of 192.168.86.216 on eth0 to 192.168.86.1 port 67
- done.
- Saving the system clock to /dev/rtc0.
- Hardware Clock updated to Sun Nov 6 13:53:31 PST 2022.
- Will now unmount temporary filesystems:umount: /tmp unmounted
- .
- Will now deactivate swap:.
- [ 67.504394][ T1345] EXT4-fs (sda1): re-mounted. Opts: (null). Quota mode: none.
- Mounting root filesystem read-only...done.
- Will now halt.
Add Comment
Please, Sign In to add comment