Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00066
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c5
B -       127 - PBL, Start
B -      1563 - bootable_media_detect_entry, Start
B -      3657 - bootable_media_detect_success, Start
B -      3661 - elf_loader_entry, Start
B -      8832 - auth_hash_seg_entry, Start
B -      9192 - auth_hash_seg_exit, Start
B -    102492 - elf_segs_hash_verify_entry, Start
B -    172075 - PBL, End
B -    141581 - SBL1, Start
B -    202977 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B -    211273 - clock_init, Start
D -      7137 - clock_init, Delta
B -    218593 - boot_flash_init, Start
D -     15067 - boot_flash_init, Delta
B -    233721 - boot_config_data_table_init, Start
D -      4697 - boot_config_data_table_init, Delta - (575 Bytes)
B -    241468 - Boot Setting :  0x00030618
B -    247843 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:4
B -    254583 - sbl1_ddr_set_params, Start
B -    256017 - Pre_DDR_clock_init, Start
B -    261842 - Pre_DDR_clock_init, End
B -    903715 - do ddr sanity test, Start
D -        61 - do ddr sanity test, Delta
B -    908381 - Image Load, Start
D -    244427 - QSEE Image Loaded, Delta - (578956 Bytes)
B -   1153662 - Image Load, Start
D -     13908 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B -   1167631 - Image Load, Start
D -    178242 - APPSBL Image Loaded, Delta - (422750 Bytes)
B -   1345934 - QSEE Execution, Start
D -        30 - QSEE Execution, Delta
B -   1352400 - SBL1, End
D -   1213473 - SBL1, Delta
S - Flash Throughput, 2433 KB/s  (1016545 Bytes,  417751 us)
S - DDR Frequency, 800 MHz
S - Core 0 Frequency, 800 MHz


U-Boot 2016.01 (Feb 16 2024 - 15:14:41 +0000), Build: jenkins-Qcom_Build-309

DRAM:  smem ram ptable found: ver: 1 len: 4
512 MiB
NAND:  QPIC controller support serial NAND
ID = 41c841c8
Vendor = c8
Device = 41
Serial Nand Device Found With ID : 0xc8 0x41
Serial NAND device Manufacturer:GD5F1GQ5REYIG
Device Size:256 MiB, Page size:2048, Spare Size:128, ECC:8-bit
qpic_nand: changing oobsize to 80 from 128 bytes
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI Link Intialized
PCI Link Intialized
In:    serial@78AF000
Out:   serial@78AF000
Err:   serial@78AF000
Support_pcie : 1
Wi-Fi mode : 1
machid: 8040004
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
autoboot in  3 secondsubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 51 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 408, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 17/3, WL threshold: 4096, image sequence number: 1831173842
ubi0: available PEBs: 0, total reserved PEBs: 408, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4431564)
## Loading kernel from FIT Image at 44000000 ...
   Using '[email protected]' configuration
   Trying 'kernel@1' kernel subimage
     Description:  ARM OpenWrt Linux-4.4.60
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x440000e4
     Data Size:    2997917 Bytes = 2.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x41208000
     Entry Point:  0x41208000
     Hash algo:    crc32
     Hash value:   aa9dc154
     Hash algo:    sha1
     Hash value:   f6dad4e994acee918c92bb5a43a61f911bf5600b
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
   Using '[email protected]' configuration
   Trying '[email protected]' fdt subimage
     Description:  ARM OpenWrt qcom-ipq50xx-mpxx device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x443d0178
     Data Size:    60116 Bytes = 58.7 KiB
     Architecture: ARM
     Hash algo:    crc32
     Hash value:   5544ca1d
     Hash algo:    sha1
     Hash value:   5e036a0500167841fba0ac7a65ece98d429395ed
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x443d0178
   Uncompressing Kernel Image ... OK
bootargs:console=ttyMSM0,115200n8 cnss2.bdf_pci0=0x60 cnss2.bdf_pci1=0xb0 cnss2.bdf_integrated=0x23 cnss2.skip_radio_bmap=0 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait module_support_pcie=1
   Loading Device Tree to 4a3ee000, end 4a3ffad3 ... OK
Using machid 0x8040004 from environment

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.60 (root@7db031f529cf) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 BaiCE_BQ6_2.0.5.3+r49254) ) #1 SMP PREEMPT Wed Apr 17 03:18:51 UTC 2024
[    0.000000] CPU: ARMv7 Processor [51af8014] revision 4 (ARMv7), cr=10c0383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[    0.000000] Ignoring memory range 0x40000000 - 0x41000000
[    0.000000] module_support_pcie:253 cur_module_support_pcie=1 .....
[    0.000000] Reserved memory: not enough space all defined regions.
[    0.000000] Reserved memory: not enough space all defined regions.
[    0.000000] Reserved memory: not enough space all defined regions.
[    0.000000] Reserved memory: not enough space all defined regions.
[    0.000000] Reserved memory: OVERLAP DETECTED!
[    0.000000] q6_mem_regions@4B000000 (0x4b000000--0x50400000) overlaps with q6_code_data@4B000000 (0x4b000000--0x4b060000)
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 11 pages/cpu @9eb5f000 s14912 r8192 d21952 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 102308
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 cnss2.bdf_pci0=0x60 cnss2.bdf_pci1=0xb0 cnss2.bdf_integrated=0x23 cnss2.skip_radio_bmap=0 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait module_support_pcie=1 swiotlb=1 coherent_pool=2M
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 398264K/413696K available (6306K kernel code, 354K rwdata, 1928K rodata, 1024K init, 450K bss, 15432K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0x9f800000 - 0xff800000   (1536 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x9f000000   ( 496 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .text : 0x80208000 - 0x80b0ab88   (9227 kB)
[    0.000000]       .init : 0x80c00000 - 0x80d00000   (1024 kB)
[    0.000000]       .data : 0x80d00000 - 0x80d58b9c   ( 355 kB)
[    0.000000]        .bss : 0x80d5b000 - 0x80dcbac8   ( 451 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] GICv2m: Node v2m: range[0xb00a000:0xb00affc], SPI[448:480]
[    0.000000] GICv2m: Node v2m: range[0xb00b000:0xb00bffc], SPI[480:512]
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000020] Switching to timer-based delay loop, resolution 41ns
[    0.000529] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000545] pid_max: default: 32768 minimum: 301
[    0.000658] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000670] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001347] Initializing cgroup subsys io
[    0.001371] Initializing cgroup subsys memory
[    0.001405] Initializing cgroup subsys devices
[    0.001419] Initializing cgroup subsys freezer
[    0.001431] Initializing cgroup subsys net_cls
[    0.001441] Initializing cgroup subsys pids
[    0.001486] CPU: Testing write buffer coherency: ok
[    0.001945] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002017] Setting up static identity map for 0x41300000 - 0x41300058
[    0.052920] MSM Memory Dump base table set up
[    0.052954] MSM Memory Dump apps data table set up
[    0.090495] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.090635] Brought up 2 CPUs
[    0.090655] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.090663] CPU: All CPU(s) started in SVC mode.
[    0.106073] VFP support v0.3: implementor 51 architecture 3 part 40 variant 3 rev 4
[    0.106470] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.106503] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.107053] pinctrl core: initialized pinctrl subsystem
[    0.108343] NET: Registered protocol family 16
[    0.109804] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.140327] cpuidle: using governor ladder
[    0.170363] cpuidle: using governor menu
[    0.170672] NET: Registered protocol family 42
[    0.175640] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[    0.180825] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.182299] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[    0.195129] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.195144] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.196744] ipq5018-pinctrl soc:iomuxc: invalid resource
[    0.196781] ipq5018-pinctrl: probe of soc:iomuxc failed with error -22
[    0.197374] CPU: IPQ5018, SoC Version: 1.1
[    0.199358] IPC logging disabled
[    0.199371] IPC logging disabled
[    0.199376] IPC logging disabled
[    0.199380] IPC logging disabled
[    0.199385] IPC logging disabled
[    0.199667] sps:sps is ready.
[    0.232889] pps_core: LinuxPPS API ver. 1 registered
[    0.232903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.232931] PTP clock support registered
[    0.235089] Advanced Linux Sound Architecture Driver Initialized.
[    0.236144] clocksource: Switched to clocksource arch_sys_counter
[    0.238876] NET: Registered protocol family 2
[    0.240100] default registered
[    0.240115] default registered
[    0.240121] MPTCP: Stable release v0.92
[    0.240182] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.240234] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.240309] TCP: Hash tables configured (established 4096 bind 4096)
[    0.240370] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.240395] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.240699] NET: Registered protocol family 1
[    0.242002] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.251730] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.251753] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.257305] Key type asymmetric registered
[    0.257328] Asymmetric key parser 'x509' registered
[    0.257378] io scheduler noop registered
[    0.257392] io scheduler deadline registered (default)
[    0.267110] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    0.267672] bt_driver 1943008.bt: bt_parse_ipc
[    0.267729] bt_driver 1943008.bt: bt_parse_mem
[    0.267776] bt_driver 1943008.bt: bt_parse_dt operating in secure mode
[    0.269066] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 154, base_baud = 0) is a EUD UART
[    0.270635] Registered Sucessfully
[    0.271366] ipq5018-pinctrl 1000000.pinctrl: invalid group "gpio32" for function "blsp1_uart1"
[    0.271408] ipq5018-pinctrl 1000000.pinctrl: invalid group "gpio34" for function "blsp1_uart1"
[    0.271472] msm_serial 78b0000.serial: msm_serial: detected port #1
[    0.271523] msm_serial 78b0000.serial: uartclk = 24000000
[    0.271599] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 20, base_baud = 1500000) is a MSM
[    0.271966] msm_serial 78af000.serial: msm_serial: detected port #0
[    0.272017] msm_serial 78af000.serial: uartclk = 1843199
[    0.272068] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 21, base_baud = 115199) is a MSM
[    0.272096] msm_serial: console setup on port #0
[    1.047711] console [ttyMSM0] enabled
[    1.052806] msm_serial: driver initialized
[    1.056386] msm_serial_hsl_init: driver initialized
[    1.386274] brd: module loaded
[    1.506819] loop: module loaded
[    1.528524] QPIC controller hw version Major:2, Minor:1
[    1.528549] QPIC controller support serial nand.
[    1.532900] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x41
[    1.537457] nand: GigaDevice GD5F1GQ5REYIG SPI NAND 1G
[    1.543747] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    1.549285] 19 ofpart partitions found on MTD device qcom_nand.0
[    1.556287] Creating 19 MTD partitions on "qcom_nand.0":
[    1.562504] 0x000000000000-0x000000080000 : "0:SBL1"
[    1.569473] 0x000000080000-0x000000100000 : "0:MIBIB"
[    1.586768] 0x000000100000-0x000000140000 : "0:BOOTCONFIG"
[    1.606761] 0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
[    1.626755] 0x000000180000-0x000000280000 : "0:QSEE"
[    1.646763] 0x000000280000-0x000000380000 : "0:QSEE_1"
[    1.666776] 0x000000380000-0x0000003c0000 : "0:DEVCFG"
[    1.668186] 0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
[    1.686790] 0x000000400000-0x000000440000 : "0:CDT"
[    1.688207] 0x000000440000-0x000000480000 : "0:CDT_1"
[    1.706783] 0x000000480000-0x000000500000 : "0:APPSBLENV"
[    1.726724] 0x000000500000-0x000000640000 : "0:APPSBL"
[    1.746747] 0x000000640000-0x000000780000 : "0:APPSBL_1"
[    1.766770] 0x000000780000-0x000000980000 : "0:ART"
[    1.769377] 0x000000980000-0x000000a00000 : "0:TRAINING"
[    1.786794] 0x000000a00000-0x000000a80000 : "factory"
[    1.788381] 0x000000a80000-0x000003d80000 : "rootfs_1"
[    1.846806] 0x000003d80000-0x000007080000 : "rootfs"
[    1.883703] mtd: device 17 (rootfs) set to be root filesystem
[    1.883936] mtdsplit: no squashfs found in "rootfs"
[    1.888485] 0x000007080000-0x000008000000 : "log"
[    1.917444] libphy: Fixed MDIO Bus: probed
[    2.136176] qca-mdio 88000.mdio: Could not find phy-reset-gpio
[    2.136353] libphy: qca_mdio: probed
[    2.141514] qca-mdio 88000.mdio: qca-mdio driver was registered
[    2.576191] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[    2.576377] libphy: qca_mdio: probed
[    2.583115] qca-mdio 90000.mdio: qca-mdio driver was registered
[    2.686472] cnss: INFO: IPC Logging is disabled!
[    2.687146] cnss[2]: INFO: Platform driver probed successfully. plat 9df48010 tgt 0xfffc
[    2.690556] cnss[41]: INFO: Platform driver probed successfully. plat 9df50010 tgt 0xfffb
[    2.698644] cnss[42]: INFO: Platform driver probed successfully. plat 9df58010 tgt 0xfffb
[    2.706735] i2c /dev entries driver
[    2.715813] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    2.746929] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
[    2.747535] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[    2.754498] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 800000 KHz
[    2.761746] sdhci: Secure Digital Host Controller Interface driver
[    2.770173] sdhci: Copyright(c) Pierre Ossman
[    2.776150] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.782001]
[    2.782001] Version Rollback Feature Disabled
[    2.787174] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x08b04000
[    2.791930] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x08b04000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x08b04000
[    2.807828] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x08b04000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x08b04000
[    2.822325] sps:BAM 0x08b04000 is registered.[    2.831743] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: ssr registeration success qcom_q6v5_wcss
[    2.833096] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available
[    2.841778] q6v5_wcss_userpd1(9eb86410) node found
[    2.849406] platform q6v5_wcss_userpd1: ssr registeration success q6v5_wcss_userpd1
[    2.853217] remoteproc remoteproc1: q6v5_wcss_userpd1 is available
[    2.860770] q6v5_wcss_userpd2(9eb866b4) node found
[    2.868016] platform q6v5_wcss_userpd2: ssr registeration success q6v5_wcss_userpd2
[    2.871790] remoteproc remoteproc2: q6v5_wcss_userpd2 is available
[    2.879349] q6v5_wcss_userpd3(9eb86924) node found
[    2.886623] platform q6v5_wcss_userpd3: ssr registeration success q6v5_wcss_userpd3
[    2.890374] remoteproc remoteproc3: q6v5_wcss_userpd3 is available
[    2.898431] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[    2.904218] coresight-csr 6001000.csr: CSR initialized
[    2.911956] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[    2.916857] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[    2.924351] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[    2.931757] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[    2.939155] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[    2.946525] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[    2.953860] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[    2.961274] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[    2.968663] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[    2.975977] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[    2.983412] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[    2.990767] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[    2.998133] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[    3.005490] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[    3.012911] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[    3.020303] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[    3.027668] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
[    3.035171] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
[    3.042582] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
[    3.050146] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x06064000
[    3.056993] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x06064000
[    3.072675] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x06064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x06064000
[    3.087168] sps:BAM 0x06064000 is registered.[    3.094319] coresight-tmc 6048000.tmc: TMC initialized
[    3.098516] coresight-tmc 6047000.tmc: TMC initialized
[    3.103607] coresight-funnel 6041000.funnel: FUNNEL initialized
[    3.108658] coresight-funnel 6100000.funnel: FUNNEL initialized
[    3.114408] coresight-funnel 6120000.funnel: FUNNEL initialized
[    3.120351] coresight-funnel 6130000.funnel: FUNNEL initialized
[    3.126262] coresight-funnel 61a1000.funnel: FUNNEL initialized
[    3.132918] coresight-etm4x 619c000.etm: ETM 4.0 initialized
[    3.138520] coresight-etm4x 619d000.etm: ETM 4.0 initialized
[    3.143981] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
[    3.149836] coresight-stm 6002000.stm: STM initialized
[    3.158766] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
[    3.161973] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[    3.174700] NET: Registered protocol family 10
[    3.196464] fullmesh registered
[    3.196495] NET: Registered protocol family 17
[    3.198466] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.202955] Bridge firewalling registered
[    3.215788] 8021q: 802.1Q VLAN Support v1.8
[    3.219996] Registering SWP/SWPB emulation handler
[    3.226533] ubi0: attaching mtd17
[    3.350417] random: nonblocking pool is initialized
[    3.387157] ubi0: scanning is finished
[    3.391302] ubi0: attached mtd17 (name "rootfs", size 51 MiB)
[    3.391328] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.396019] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.402826] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.409659] ubi0: good PEBs: 408, bad PEBs: 0, corrupted PEBs: 0
[    3.416432] ubi0: user volume: 5, internal volumes: 1, max. volumes count: 128
[    3.422670] ubi0: max/mean erase counter: 17/3, WL threshold: 4096, image sequence number: 1831173842
[    3.429716] ubi0: available PEBs: 0, total reserved PEBs: 408, PEBs reserved for bad PEB handling: 20
[    3.439036] ubi0: background thread "ubi_bgt0d" started, PID 113
[    3.452522] hctosys: unable to open rtc device (rtc0)
[    3.461385] ALSA device list:
[    3.461404]   No soundcards found.
[    3.465754] VFS: Mounted root (squashfs filesystem) readonly on device 31:22.
[    3.468149] Freeing unused kernel memory: 1024K (80c00000 - 80d00000)
[    3.920510] init: Console is alive
[    3.920718] init: - watchdog -
[    5.768851] usbcore: registered new interface driver usbfs
[    5.768930] usbcore: registered new interface driver hub
[    5.773356] usbcore: registered new device driver usb
[    5.781238] Button Hotplug driver version 0.4.1
[    5.793939] SCSI subsystem initialized
[    5.809867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.810756] ehci-platform: EHCI generic platform driver
[    5.820478] remoteproc remoteproc4: bt_rproc_driver is available
[    5.820557] bt_rproc_driver bt_rproc_driver: Probed
[    6.054893] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.054944] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.059523] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[    6.066902] xhci-hcd xhci-hcd.0.auto: irq 224, io mem 0x08a00000
[    6.076363] hub 1-0:1.0: USB hub found
[    6.081796] hub 1-0:1.0: 1 port detected
[    6.085767] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.089499] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.094797] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.103008] hub 2-0:1.0: USB hub found
[    6.110633] hub 2-0:1.0: 1 port detected
[    6.119952] usbcore: registered new interface driver usb-storage
[    6.121261] usbcore: registered new interface driver uas
[    6.396154] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    6.542415] hub 1-1:1.0: USB hub found
[    6.542742] hub 1-1:1.0: 4 ports detected
[    6.826149] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[    6.946338] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Before mount_root
[    9.290268] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 148
[    9.303872] UBIFS (ubi0:4): recovery needed
[    9.386928] UBIFS (ubi0:4): recovery completed
[    9.387085] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "rootfs_data"
[    9.390350] UBIFS (ubi0:4): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    9.398248] UBIFS (ubi0:4): FS size: 9650176 bytes (9 MiB, 76 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[    9.408077] UBIFS (ubi0:4): reserved for root: 455800 bytes (445 KiB)
[    9.417964] UBIFS (ubi0:4): media format: w4/r0 (latest is w4/r0), UUID 98BE8086-05F7-4FBC-9EAB-501779FDF59A, small LPT model
[    9.427824] mount_root: switching to jffs2 overlay
After mount_root
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.530842 seconds, 241.1KB/s
ln: /lib/firmware/IPQ5018/caldata.bin: File exists
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.547341 seconds, 233.9KB/s
ln: /lib/firmware/qcn9100/caldata_1.bin: No such file or directory
ln: /lib/firmware/qcn6122/caldata_1.bin: File exists
131072+0 records in
131072+0 records out
131072 bytes (128.0KB) copied, 0.547980 seconds, 233.6KB/s
ln: /lib/firmware/qcn9100/caldata_2.bin: No such file or directory
ln: /lib/firmware/qcn6122/caldata_2.bin: File exists
[   11.183638] procd: - early -
[   11.183739] procd: - watchdog -
[   11.862198] procd: - ubus -
[   12.868728] procd: - init -
Please press Enter to activate this console.
[   13.783485] ubi: mtd17 is already attached to ubi0BT FW mount is successful

[   13.943962] ubi: mtd17 is already attached to ubi0 WIFI FW mount is successful
[   16.237995] Key type dns_resolver registered
[   16.277137] RPC: Registered named UNIX socket transport module.
[   16.277163] RPC: Registered udp transport module.
[   16.281852] RPC: Registered tcp transport module.
[   16.286849] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.299462] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   16.308913] Initializing XFRM netlink socket
[   16.310457] NET: Registered protocol family 15
[   16.538489] ssdk_switch_device_num_init[1159]:INFO:ess-switch dts node number: 2
[   16.538574] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[   16.544948] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: local bus
[   16.550986] ssdk_dt_parse_access_mode[869]:INFO:switchreg_base_addr: 0x39c00000
[   16.558170] ssdk_dt_parse_access_mode[870]:INFO:switchreg_size: 0x200000
[   16.565257] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0xf
[   16.572216] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[   16.577508] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[   16.584108] ssdk_dt_parse_port_bmp[757]:INFO:port_bmp doesn't exist!
[   16.590466] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist!
[   16.596788] ssdk_dt_parse_led[943]:INFO:current dts led_source_num is 1
[   16.602427] ssdk_plat_init start
[   19.016156] ssdk_mp_reset_init[739]:INFO:MP reset successfully!
[   19.016218] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully!
[   19.022061] mpge_phy_api_ops_init[1089]:INFO:qca probe mpge phy driver succeeded!
[   19.028593] regi_init[3598]:INFO:Initializing SCOMPHY!
[   20.160173] _adpt_mp_uniphy_clk_output_ctrl_set[236]:INFO:uniphy will output clock as 25000000Hz
[   20.160288] ssdk_led_init[152]:INFO:ssdk_led_mode:3, ssdk_led_map:ffc, ssdk_led_src_id:0
[   20.168157] ssdk_switch_register[1710]:INFO:Chip version 0xee
[   20.176109] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
[   20.181734] ssdk_switch_register[1744]:INFO:polling is selected
[   20.189906] regi_init[3608]:INFO:Initializing SCOMPHY Done!!
[   20.195563] ssdk_dt_get_switch_node[970]:INFO:ess-switch DT exist!
[   20.201459] ssdk_dt_parse_access_mode[856]:INFO:switch_access_mode: mdio
[   20.207442] ssdk_dt_parse_mac_mode[292]:INFO:mac mode doesn't exit!
[   20.214282] ssdk_dt_parse_mac_mode[301]:INFO:mac mode1 doesn't exit!
[   20.220286] ssdk_dt_parse_mac_mode[310]:INFO:mac mode2 doesn't exit!
[   20.226913] ssdk_dt_parse[1061]:INFO:switch node is qca83xx!
[   20.233206] ssdk_plat_init start
[   20.302578] f1_phy_api_ops_init[1517]:INFO:qca probe f1 phy driver succeeded!
[   20.302600] regi_init[3556]:INFO:Initializing ISISC!!
[   20.308729] /soc/ess-instance/ess-switch1@1: could not get #gpio-cells for /soc/hs_m31phy@5b000
[   20.516150] qca_ar8327_gpio_reset[3489]:INFO:GPIO39 reset switch done
[   20.516328] ssdk_switch_register[1718]:INFO:Chip version 0x1302
[   20.521577] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist
[   20.527315] ssdk_switch_register[1744]:INFO:polling is selected
[   22.176140] regi_init[3561]:INFO:Initializing ISISC Done!!
[   22.176259] regi_init[3631]:INFO:qca-ssdk module init succeeded!
[   22.191788] tun: Universal TUN/TAP device driver, 1.6
[   22.191812] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   22.210070] **********************************************************
[   22.210100] * NSS Data Plane driver
[   22.215496] **********************************************************
[   22.255123] l2tp_core: L2TP core driver, V2.0
[   22.256808] l2tp_netlink: L2TP netlink interface
[   22.641376] nss_driver - fw of size 761676  bytes copied to load addr: 40000000, nss_id : 0
[   22.642795] Supported Frequencies -
[   22.648577] 850 MHz 1 GHz
[   22.654158]
[   22.655090] 7f6414c0: set sdma 9d6db900
[   22.656848] node size 2 # items 4
[   22.660069] memory: 40000000 536870912 (avl 432029696) items 4 active_cores 1
[   22.663547] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   22.670694] 7f6414c0: NSS core 0 DDR from 40000000 to 41000000
[   22.677535] 7f6414c0: meminfo init succeed
[   22.705452] sit: IPv6 over IPv4 tunneling driver
[   22.709171] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[   22.713255] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[   22.714299] node size 2 # items 4
[   22.714307] memory: 40000000 536870912 (avl 432029696) items 4 active_cores 1
[   22.714315] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[   22.714324] 7f6414c0: nss core 0 booted successfully
[   22.743657] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[   22.748547] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[   22.754543] gre: GRE over IPv4 demultiplexor driver
[   22.758799] ip_gre: GRE over IPv4 tunneling driver
[   22.765479] ip6_gre: GRE over IPv6 tunneling driver
[   22.778341] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   22.844724] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   22.853814] rmnet_nss_init(): initializing rmnet_nss
[   22.875306] nf_conntrack version 0.5.0 (6238 buckets, 24952 max)
[   23.749222] Netfilter messages via NETLINK v0.30.
[   23.753052] ip_set: protocol 6
[   27.412269] openvswitch: Open vSwitch switching datapath
[   28.290708] PPP generic driver version 2.4.2
[   28.497418] nss_lag_init[352]:LAG Manager Installed
[   28.877606] NET: Registered protocol family 24
[   29.168435] PPTP driver version 0.8.5
[   29.569147] diag: IPC Logging disabled
[   29.570121] TRACK: P[0]PMask[4]
[   29.571778] TRACK: P[1]PMask[4]
[   29.575162] TRACK: P[2]PMask[4]
[   29.578865] TRACK: P[3]PMask[4]
[   29.581652] nik 4097 info->svc_id
[   29.969238] QCA multicast snooping installed successfully
[   30.169738] <NSS-CRYPTO>:module loaded Build_ID - 04/17/24, 02:23:00 SoC=ipq50xx
[   30.388705] cannot find nss-macsec0 node
[   30.388784] cannot find nss-macsec1 node
[   30.391729] cannot find nss-macsec2 node
[   30.395589] nss_macsec init success
[   33.067189] u32 classifier
[   33.067209]     input device check on
[   33.068777]     Actions configured
[   33.467183] Mirror/redirect action on
[   37.333905] fuse init (API version 7.23)
[   37.531971] arp_tables: (C) 2002 David S. Miller
[   37.539387] usbcore: registered new interface driver cdc_acm
[   37.539411] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   37.547386] usbcore: registered new interface driver cdc_wdm
[   37.570000] Ebtables v2.0 registered
[   37.573401] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.584011] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   37.585401] led_major:236 result: 0
[   37.587867] error: failed to request led3 GPIO
[   37.591098] error: failed to request (null) GPIO
[   37.595591] error: failed to request (null) GPIO
[   37.600491] error: failed to request (null) GPIO
[   37.605437] BaiCells Led (GPIO) Driver version 1.0 loaded (major 236)
[   37.784693] usb 1-1.1: USB disconnect, device number 3
[   38.012905] lte_major:235 result: 0
[   38.013654] BaiCells LTE DEVICE version 1.0 loaded (major 235)
[   38.091839] ctnetlink v0.93: registering with nfnetlink.
[   38.097923] nf_conntrack_rtsp v0.6.21 loading
[   38.227353] nf_nat_rtsp v0.6.21 loading
[   38.236537] PPP MPPE Compression module registered
[   38.262874] usbcore: registered new interface driver usbserial
[   38.263072] usbcore: registered new interface driver usbserial_generic
[   38.267817] usbserial: USB Serial support registered for generic
[   38.289040] vmap allocation for size 167936 failed: use vmalloc=<size> to increase size.
[   38.292650] wireguard: WireGuard 0.0.20171017 loaded. See www.wireguard.com for information.
[   38.296244] wireguard: Copyright (C) 2015-2017 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[   38.354706] xt_time: kernel timezone is -0000
[   38.387107] usbcore: registered new interface driver option
[   38.387224] usbserial: USB Serial support registered for GSM modem (1-port)
[   38.393090] usbcore: registered new interface driver qcserial
[   38.398568] usbserial: USB Serial support registered for Qualcomm USB modem
qcawifi configuration is disable
[   43.312582] configuring additional NSS pbufs
[   43.325972] additional pbufs of size 3203072 got added to NSS
[   43.382248] mem_manager: module license 'Proprietary' taints kernel.
[   43.382275] Disabling lock debugging due to kernel taint
[   43.410356] vmap allocation for size 503808 failed: use vmalloc=<size> to increase size.
[   48.365595] vmap allocation for size 3129344 failed: use vmalloc=<size> to increase size.
[   48.367653] vmap allocation for size 475136 failed: use vmalloc=<size> to increase size.
[   48.630604] wlan: [1497:I:RPTR] qca_multi_link_init_module:
[   48.630604] ******QCA Repeater Initialization Done***********
[   48.630604]
[   48.644451] vmap allocation for size 118784 failed: use vmalloc=<size> to increase size.
***** starting cnssdaemon  -i integrated -i integrated1 -i integrated2 *****
[   49.436175] usb 1-1.1: new high-speed USB device number 4 using xhci-hcd
[   49.586816] option 1-1.1:1.0: GSM modem (1-port) converter detected
[   49.588338] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[   49.592648] option 1-1.1:1.1: GSM modem (1-port) converter detected
[   49.600992] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[   49.605910] option 1-1.1:1.2: GSM modem (1-port) converter detected
[   49.614215] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[   49.619158] option 1-1.1:1.3: GSM modem (1-port) converter detected
[   49.627480] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB3
*****cnssdaemon pid=1567*********
[   49.999512] cnss[41]: INFO: Setting daemon_support=1 for instance_id 0x41
[   50.028284] cnss[42]: INFO: Setting daemon_support=1 for instance_id 0x42
[   50.053617] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2
******No cold_boot_support*****
[   51.157499] vmap allocation for size 1519616 failed: use vmalloc=<size> to increase size.
[   51.158515] vmap allocation for size 270336 failed: use vmalloc=<size> to increase size.
[   52.004018] vmap allocation for size 966656 failed: use vmalloc=<size> to increase size.
[   52.004743] vmap allocation for size 147456 failed: use vmalloc=<size> to increase size.
[   52.028358] wlan: [1659:I:ANY] =======ol_if_register_wifi3_0==========
[   52.028358]
[   52.028401] wlan: [1659:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:a67c2de4
[   52.035242] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss
[   52.072403] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1820
[   53.885260] Subsystem error monitoring/handling services are up
[   53.885684] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up
[   53.886011] rpmsg_dev_probe: No pm domain
[   53.886612] rpmsg_dev_probe: No pm domain
[   53.902012] diag: Receiving feature mask length more than Apps support
[   53.902030] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 7fc06dc4
[   53.902262] wlan: [1659:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   53.902320] remoteproc remoteproc1: powering up q6v5_wcss_userpd1
[   53.910483] q6v5_wcss_userpd1 wcss powered up successfully
[   53.914054] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[   53.914513] cnss[2]: INFO: device_id : 65532 mem mode : [1]
[   53.944218] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[   53.944218] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x250282e9, fw_build_timestamp: 2021-08-05 01:40, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[   53.944277] cnss[2]: INFO: Using Boardid from bootargs:0x23
[   53.952789] cnss[2]: INFO: BDF location : 0x4c400000
[   53.952794] cnss[2]: INFO: BDF IPQ5018/bdwlan.b23 size 131072
[   53.954790] cnss[2]: INFO: per device BDF location : 0x4c420000
[   53.954923] cnss[2]: INFO: CALDATA IPQ5018/caldata.bin size 131072 offset 0x20000
[   54.002327] Subsystem error monitoring/handling services are up
[   54.010048] remoteproc remoteproc1: remote processor q6v5_wcss_userpd1 is now up
[   54.016330] wlan: [1659:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   54.023614] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffc, FW ready timeout: 15 seconds
[   54.031125] cnss[2]: INFO: FW ready received for device 0xfffc
[   54.041410] wlan: [1659:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode
[   54.045805] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   54.056898] wlan: [1659:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4
[   54.059989] wlan: [1659:I:ANY] __ol_ath_attach: Allocated soc 9a380500
[   54.068813] wlan: [1659:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   54.122822] wlan: [1659:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4
[   54.123615] wlan: [1659:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc
[   54.131854] wlan: [1659:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 7 Target Type 1d
[   54.142237] wlan: [1659:I:ANY] __ol_ath_attach: dev name soc0
[   54.150727] wlan: [1659:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 9a34ec00
[   54.159868] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.164004] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.173942] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.183919] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.193969] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.204063] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.214100] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   54.224406] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   54.234327] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   54.245566] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   54.254413] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.264451] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.274545] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   54.284607] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   54.294661] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   54.304778] wlan: [1659:I:ANY] htc_wmi_init: HT Create . 99591000
[   54.314799] wlan: [1659:I:ANY] htc_wmi_init: Skipping BMI Done
[   54.321299] wlan: [1659:I:ANY] htc_wmi_init: host_enable 0
[   54.338439] wlan: [1659:I:ANY] ol_target_init_complete: CDP soc attach success
[   54.338476] wlan: [1659:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[   54.344797] wlan: [1659:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 99591000, ep 2, value 1
[   54.353984] wlan: [102:I:TIF] HE_CAP Info = 9a08010d
[   54.361944] wlan: [102:I:TIF] Num HW modes = 1
[   54.366958] wlan: [102:I:TIF] Num PHY = 1
[   54.371196] wlan: [102:I:TIF] FW Build Version (Ext.) = 0
[   54.375278] wlan: [102:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   54.380677] wlan: [102:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   54.387499] wlan: [102:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   54.393607] wlan: [102:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   54.407950] wlan: [102:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   54.416382] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   54.423548] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   54.430772] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   54.438763] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   54.446131] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   54.453411] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   54.461424] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   54.468798] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   54.476066] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   54.484065] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   54.491440] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   54.498737] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   54.506726] wlan: [102:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:9a34ec00
[   54.517247] wlan: [102:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9
[   54.522769] wlan: [102:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   54.632803] wlan: [102:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[   54.671882] wlan: [102:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   54.671923] wlan: [102:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528
[   54.671923]
[   54.679565] wlan: [1659:I:ANY] ol_ath_connect_htc: WMI is ready
[   54.701103] wlan: [1659:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   54.701146] wlan: [1659:E:NSS] [nss-wifili]: pdev:97fe0500 radio_ifnum:28 scheme_id:0 radio_priority:1
[   54.715001] wlan: [1659:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   54.720940] wlan: [1659:I:ANY] ol_ath_soc_attach: connect HTC
[   54.727163] wlan: [1659:I:ANY] ol_ath_soc_attach: bypasswmi : 0
[   54.732056] wlan: [1659:I:MSCS] qca_mscs_module_init:
[   54.732056] ****QCA MSCS Initialization Done**** SoC 9a380500
[   54.739103] wlan: [1659:I:ANY] ol_ath_soc_attach: UMAC attach
[   54.749608] wlan: [1659:I:ANY] __ol_ath_attach: pdev_netdev name wifi0
[   54.754358] wlan: [1659:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target
[   54.761751] wlan: [1659:I:ANY] __ol_ath_attach: BURSTING enabled by default
[   54.768075] wlan: [1659:I:ANY] ol_ath_pdev_attach: interface_id 0
[   54.774673] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   54.780743] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[   54.788230] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[   54.797924] wlan: [1659:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 680680c before update
[   54.812082] wlan: [1659:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 680680c after update
[   54.820861] wlan: [1659:I:ANY] ol_ath_update_ext_caps: 11ax 2G supported case
[   54.830028] wlan: [1659:I:ANY] ieee80211com_set_txpowerlimit: ic->ic_txpowlimit=63
[   54.838378] wlan: [1659:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:d2:d2 soc: soc0 pdev: wifi0
[   54.844700] wlan: [1659:I:MBSSIE] ieee80211_mbss_attach: :>
[   54.856319] wlan: [1659:I:MBSSIE] ieee80211_mbss_attach: :<
[   54.861769] wlan: [1659:I:ANY] ol_resmgr_create: OL Resmgr Init-ed
[   54.867885] wlan: [1659:I:ANY] acfg_attach: acfg_attach: 3323: Netlink socket created:96ce4000
[   54.873630] wlan: [1659:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1
[   54.882698] wlan: [1659:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   54.889212] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[1], ptr:a6448c94
[   54.895858] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(9aefbc08) Enabling DBDC Repeater 0  soc_lag 9953f880
[   54.903202] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   54.912822] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(9aefbc08) is_primary 0
[   54.921109] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled
[   54.931744] wlan: [1659:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5
[   54.931744]
[   54.946639] wlan: [1659:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   54.952690] wlan: [1659:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 8192
[   54.964969] wlan: [1659:I:ANY] __ol_ath_attach: needed_headroom reservation 60
[   54.971277] wlan: [1659:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41
[   54.978427] wlan: [1659:I:ANY] wlan_cfg80211_init: Number of 2G channels: 11
[   54.988811] wlan: [1659:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x97fe0500, wdev: 0x97ff7c6c, wiphy: 0x96cc0160, netdev: 0x97fe0000
[   54.998004] wlan: [1659:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   55.009447] wlan: [1659:E:QLD] qld_register: Handle or address is NULL
[   55.018311] wlan: [1659:I:ANY] wlan_pdev_operation: num_radios=1, wifi_radios[0].sc = 97fe0500_radio_type = 2
[   55.023865] wlan: [1659:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   55.033774] remoteproc remoteproc2: powering up q6v5_wcss_userpd2
[   55.045130] Subsystem error monitoring/handling services are up
[   55.047781] remoteproc remoteproc2: remote processor q6v5_wcss_userpd2 is now up
[   55.053628] wlan: [1659:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   55.063389] cnss[41]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 15 seconds
[   55.120493] cnss[41]: INFO: QMI WLFW service connected, state: 0x1
[   55.120878] cnss[41]: INFO: device_id : 65531 mem mode : [1]
[   55.125731] cnss[41]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[   55.132445] cnss[41]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x250282e9, fw_build_timestamp: 2021-08-05 01:40, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[   55.140039] cnss[41]: INFO: Device BAR Info pa: 0x81e00000, va: 0xa8b00000, size: 0x200000
[   55.159741] cnss[41]: INFO: Using Boardid from bootargs:0x60
[   55.176320] cnss[41]: INFO: BDF location : 0x4d600000
[   55.176354] cnss[41]: INFO: BDF qcn6122/bdwlan.b60 size 131072
[   55.181195] cnss[41]: INFO: per device BDF location : 0x4d620000
[   55.186359] cnss[41]: INFO: CALDATA qcn6122/caldata_1.bin size 131072 offset 0x20000
[   55.286161] cnss[41]: INFO: FW ready received for device 0xfffb
[   55.286404] wlan: [1659:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode
[   55.291304] cnss[41]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   55.308271] wlan: [1659:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4
[   55.308613] wlan: [1659:I:ANY] __ol_ath_attach: Allocated soc 96900500
[   55.316493] wlan: [1659:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   55.324266] wlan: [1659:E:QDF] CONFIG creation failed
[   55.333592] wlan: [1659:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc
[   55.338606] wlan: [1659:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 7 Target Type 1e
[   55.347795] wlan: [1659:I:ANY] __ol_ath_attach: dev name soc1
[   55.358912] wlan: [1659:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 96ce7800
[   55.366697] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.370771] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.380672] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.390732] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.400863] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.410847] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.421011] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   55.431024] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   55.441077] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   55.451394] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   55.462447] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.471301] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.481334] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   55.491406] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   55.501484] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   55.511569] wlan: [1659:I:ANY] htc_wmi_init: HT Create . 968f9000
[   55.521633] wlan: [1659:I:ANY] htc_wmi_init: Skipping BMI Done
[   55.527827] wlan: [1659:I:ANY] htc_wmi_init: host_enable 0
[   55.544042] wlan: [1659:I:ANY] ol_target_init_complete: CDP soc attach success
[   55.544080] wlan: [1659:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[   55.550527] wlan: [1659:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 968f9000, ep 2, value 1
[   55.560865] wlan: [102:I:TIF] HE_CAP Info = 9a08010d
[   55.567667] wlan: [102:I:TIF] Num HW modes = 1
[   55.572601] wlan: [102:I:TIF] Num PHY = 1
[   55.577066] wlan: [102:I:TIF] FW Build Version (Ext.) = 0
[   55.580911] wlan: [102:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   55.586336] wlan: [102:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   55.593150] wlan: [102:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   55.599323] wlan: [102:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   55.613712] wlan: [102:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   55.622078] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   55.629242] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   55.636424] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   55.644411] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   55.651831] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   55.660343] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   55.667093] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   55.674612] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   55.681744] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   55.689795] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   55.697126] wlan: [102:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   55.704375] wlan: [102:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   55.712384] wlan: [102:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:96ce7800
[   55.723116] wlan: [102:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9
[   55.728483] wlan: [102:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   55.838444] wlan: [102:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[   56.024843] wlan: [102:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   56.024885] wlan: [102:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 163, max_ast_index: 528
[   56.024885]
[   56.032552] wlan: [1659:I:ANY] ol_ath_connect_htc: WMI is ready
[   56.054159] wlan: [1659:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   56.054201] wlan: [1659:E:NSS] [nss-wifili]: pdev:95c20500 radio_ifnum:29 scheme_id:1 radio_priority:0
[   56.068712] wlan: [1659:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   56.074316] wlan: [1659:I:ANY] ol_ath_soc_attach: connect HTC
[   56.079524] wlan: [1659:I:ANY] ol_ath_soc_attach: bypasswmi : 0
[   56.085097] wlan: [1659:I:ANY] ol_ath_soc_attach: UMAC attach
[   56.090943] wlan: [1659:I:ANY] __ol_ath_attach: pdev_netdev name wifi1
[   56.096782] wlan: [1659:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target
[   56.105428] wlan: [1659:I:ANY] __ol_ath_attach: BURSTING enabled by default
[   56.110298] wlan: [1659:I:ANY] ol_ath_pdev_attach: interface_id 1
[   56.116751] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   56.122922] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[   56.130425] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 5150, hi_5g = 5895
[   56.140149] wlan: [1659:I:ANY] ol_ath_update_wireless_modes: wireless_modes = f97f9001 before update
[   56.154490] wlan: [1659:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = f97f9001 after update
[   56.164778] wlan: [1659:I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case
[   56.172416] wlan: [1659:I:ANY] ieee80211com_set_txpowerlimit: ic->ic_txpowlimit=63
[   56.179579] wlan: [1659:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:b6:b6 soc: soc1 pdev: wifi1
[   56.187202] wlan: [1659:I:MBSSIE] ieee80211_mbss_attach: :>
[   56.198796] wlan: [1659:I:MBSSIE] ieee80211_mbss_attach: :<
[   56.204236] wlan: [1659:I:ANY] ol_resmgr_create: OL Resmgr Init-ed
[   56.210077] wlan: [1659:I:ANY] acfg_attach: acfg_attach: Offload using existing sock 96ce4000
[   56.216088] wlan: [1659:I:ANY] acfg_attach: Offload using existing sock 96ce4000
[   56.216088]
[   56.224718] wlan: [1659:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1
[   56.235717] wlan: [1659:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   56.240636] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[2], ptr:a6448c94
[   56.247132] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(969a1408) Enabling DBDC Repeater 0  soc_lag 968dfc40
[   56.254406] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   56.265344] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(969a1408) is_primary 0
[   56.272362] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled
[   56.286570] wlan: [1659:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5
[   56.286570]
[   56.287661] wlan: [1659:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   56.304095] wlan: [1659:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 8192
[   56.313460] wlan: [1659:I:ANY] __ol_ath_attach: needed_headroom reservation 60
[   56.322485] wlan: [1659:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41
[   56.330145] wlan: [1659:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x95c20500, wdev: 0x95c37c6c, wiphy: 0x951bc160, netdev: 0x95c20000
[   56.342429] wlan: [1659:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   56.353539] wlan: [1659:E:QLD] qld_register: Handle or address is NULL
[   56.363677] wlan: [1659:I:ANY] wlan_pdev_operation: num_radios=2, wifi_radios[1].sc = 95c20500_radio_type = 2
[   56.368100] wlan: [1659:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   56.378055] remoteproc remoteproc3: powering up q6v5_wcss_userpd3
[   56.389411] Subsystem error monitoring/handling services are up
[   56.391833] remoteproc remoteproc3: remote processor q6v5_wcss_userpd3 is now up
[   56.397868] wlan: [1659:I:ANY] ol_ath_wifi_ssr: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   56.405881] cnss[42]: INFO: Waiting for FW ready. Device: 0xfffb, FW ready timeout: 15 seconds
[   56.480111] cnss[42]: INFO: QMI WLFW service connected, state: 0x1
[   56.480615] cnss[42]: INFO: device_id : 65531 mem mode : [1]
[   56.485222] cnss[42]: INFO: platform name: Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1
[   56.495025] cnss[42]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x250282e9, fw_build_timestamp: 2021-08-05 01:40, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[   56.499706] cnss[42]: INFO: Device BAR Info pa: 0xa1e00000, va: 0xa9a80000, size: 0x200000
[   56.519628] cnss[42]: INFO: Using Boardid from bootargs:0xb0
[   56.537052] cnss[42]: INFO: BDF location : 0x4ed00000
[   56.537078] cnss[42]: INFO: BDF qcn6122/bdwlan.bb0 size 131072
[   56.542046] cnss[42]: INFO: per device BDF location : 0x4ed20000
[   56.547157] cnss[42]: INFO: CALDATA qcn6122/caldata_2.bin size 131072 offset 0x20000
[   56.626179] cnss[42]: INFO: FW ready received for device 0xfffb
[   56.626432] wlan: [1659:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode
[   56.631345] cnss[42]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   56.649226] wlan: [1659:I:ANY] qca_napi_create: qca_napi_create: napi instance 0 created on pipe 4
[   56.649590] wlan: [1659:I:ANY] __ol_ath_attach: Allocated soc 94000500
[   56.658617] wlan: [1659:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   56.664373] wlan: [1659:E:QDF] CONFIG creation failed
[   56.674533] wlan: [1659:E:QDF] cmdresp creation failed 0x00000000
[   56.679573] wlan: [1659:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc
[   56.685546] wlan: [1659:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 7 Target Type 1e
[   56.694850] wlan: [1659:I:ANY] __ol_ath_attach: dev name soc2
[   56.704739] wlan: [1659:I:ANY] ol_ath_soc_attach: WMI attached. wmi_handle 94be0800
[   56.713820] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.717906] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.727720] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.737742] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.747851] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.759177] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.767987] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   56.778066] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   56.788103] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   56.798577] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   56.808240] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.818345] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.828392] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 1
[   56.838443] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   56.848530] wlan: [1659:I:MBSSIE] ol_ath_sanitize_ema_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   56.859882] wlan: [1659:I:ANY] htc_wmi_init: HT Create . 94ba9000
[   56.868683] wlan: [1659:I:ANY] htc_wmi_init: Skipping BMI Done
[   56.874870] wlan: [1659:I:ANY] htc_wmi_init: host_enable 0
[   56.891208] wlan: [1659:I:ANY] ol_target_init_complete: CDP soc attach success
[   56.891282] wlan: [1659:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[   56.897594] wlan: [1659:I:ANY] htc_set_async_ep: htc_set_async_ep: htc_handle 94ba9000, ep 2, value 1
[   56.906818] wlan: [1229:I:TIF] HE_CAP Info = 9a08010d
[   56.914769] wlan: [1229:I:TIF] Num HW modes = 1
[   56.919865] wlan: [1229:I:TIF] Num PHY = 1
[   56.924112] wlan: [1229:I:TIF] FW Build Version (Ext.) = 0
[   56.928309] wlan: [1229:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   56.933722] wlan: [1229:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   56.940714] wlan: [1229:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   56.946892] wlan: [1229:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   56.962684] wlan: [1229:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   56.969874] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   56.977191] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   56.984874] wlan: [1229:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 9
[   56.992505] wlan: [1229:I:TIF] init_deinit_set_per_pdev_mbssid_config: pdev supporting 6ghz
[   57.000287] wlan: [1229:I:TIF] init_deinit_set_per_pdev_mbssid_config: MBSSID feature enabled for 6ghz pdev  - pdev_idx: 0
[   57.008332] wlan: [1229:I:TIF] init_deinit_set_per_pdev_mbssid_config: EMA AP feature enabled for 6Ghz pdev - pdev_idx: 0
[   57.019490] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   57.030505] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 16
[   57.037934] wlan: [1229:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 16
[   57.045662] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   57.053655] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 16
[   57.062275] wlan: [1229:I:TIF] init_deinit_get_ema_max_pp: ema_ap_max_pp: 4
[   57.068801] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   57.075782] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 16
[   57.083246] wlan: [1229:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 16
[   57.090995] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   57.098886] wlan: [1229:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 16
[   57.106325] wlan: [1229:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 16
[   57.114051] wlan: [1229:I:ANY] init_deinit_update_pdev_tgt_info: pdev id:0 wmi_handle:94be0800
[   57.125373] wlan: [1229:I:ANY] init_deinit_update_pdev_tgt_info: Pdev = 0 Number of peers = 137 vdevs = 9
[   57.130487] wlan: [1229:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   57.241438] wlan: [1229:I:ANY] copy_fw_abi_version_tlv: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[   57.430325] wlan: [1229:I:ANY] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0
[   57.430368] wlan: [1229:I:ANY] dp_peer_map_attach_wifi3: dp_peer_map_attach_wifi3 max_peers 170, max_ast_index: 528
[   57.430368]
[   57.438044] wlan: [1659:I:ANY] ol_ath_connect_htc: WMI is ready
[   57.460428] wlan: [1659:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   57.460470] wlan: [1659:E:NSS] [nss-wifili]: pdev:93b20500 radio_ifnum:30 scheme_id:2 radio_priority:1
[   57.473945] wlan: [1659:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   57.480727] wlan: [1659:I:ANY] ol_ath_soc_attach: connect HTC
[   57.485719] wlan: [1659:I:ANY] ol_ath_soc_attach: bypasswmi : 0
[   57.491685] wlan: [1659:I:ANY] ol_ath_soc_attach: UMAC attach
[   57.497389] wlan: [1659:I:ANY] __ol_ath_attach: pdev_netdev name wifi2
[   57.503013] wlan: [1659:I:ANY] __ol_ath_attach: Skip txrx_pdev_attach_target
[   57.511437] wlan: [1659:I:ANY] __ol_ath_attach: BURSTING enabled by default
[   57.516599] wlan: [1659:I:ANY] ol_ath_pdev_attach: interface_id 2
[   57.522959] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   57.529241] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[   57.536663] wlan: [1659:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 2, modes = 793f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 6105, hi_5g = 7125
[   57.546458] wlan: [1659:I:ANY] ol_ath_update_wireless_modes: wireless_modes = 793f9001 before update
[   57.561840] wlan: [1659:I:ANY] ol_ath_update_wireless_modes: Wireless_modes = 793f9001 after update
[   57.569797] wlan: [1659:I:ANY] ol_ath_update_ext_caps: 11ax 5G supported case
[   57.578676] wlan: [1659:I:ANY] ieee80211com_set_txpowerlimit: ic->ic_txpowlimit=63
[   57.585781] wlan: [1659:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 02:03:7f:12:f3:f3 soc: soc2 pdev: wifi2
[   57.593536] wlan: [1659:I:MBSSIE] ieee80211_mbss_attach: :>
[   57.605233] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: config_low: 0x77111111
[   57.610533] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: config_high: 0x7711177
[   57.620676] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 1 is 0
[   57.630459] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 2 is 0
[   57.643057] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 3 is 0
[   57.655718] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 4 is 0
[   57.669695] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 5 is 0
[   57.681069] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 6 is 0
[   57.693915] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 7 is 1
[   57.706424] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 8 is 1
[   57.719115] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 9 is 2
[   57.731760] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 10 is 2
[   57.744450] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 11 is 2
[   57.757108] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 12 is 3
[   57.771169] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 13 is 3
[   57.782793] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 14 is 3
[   57.795421] wlan: [1659:I:MBSSIE] ieee80211_allocate_beacon_pos_for_mbss_cache_nodes: beacon position for mbss cache node with bssidx: 15 is 4
[   57.808153] wlan: [1659:I:MBSSIE] ieee80211_determine_max_non_transmit_vaps: :< 16
[   57.820923] wlan: [1659:I:MBSSIE] ieee80211_mbss_attach: :<
[   57.828445] wlan: [1659:I:ANY] ol_resmgr_create: OL Resmgr Init-ed
[   57.834103] wlan: [1659:I:ANY] acfg_attach: acfg_attach: Offload using existing sock 96ce4000
[   57.840162] wlan: [1659:I:ANY] acfg_attach: Offload using existing sock 96ce4000
[   57.840162]
[   57.848812] wlan: [1659:I:ANY] ol_ath_stats_attach: periodic_chan_stats: 1
[   57.858874] wlan: [1659:I:ANY] wlan_scan_update_channel_list: num_chan: 51
[   57.864478] wlan: [0:I:ANY] ol_ath_pdev_attach: Set global_ic[3], ptr:a6448c94
[   57.871205] wlan: [0:I:ANY] dp_lag_soc_enable: pdev(94be2408) Enabling DBDC Repeater 0  soc_lag 94bcd580
[   57.878549] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   57.889745] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: pdev(94be2408) is_primary 0
[   57.896530] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: twt enabled
[   57.910448] wlan: [1659:I:ANY] ol_ath_ucfg_set_rx_pkt_protocol_tagging: Set RX packet type TAG, opcode : 0, pkt_type : 18, metadata : 0xca0,pdev_id = 0, REO dest ring = 5
[   57.910448]
[   57.911745] wlan: [1659:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   57.928193] wlan: [1659:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: pdev_idx = 0 tx_desc_limit = 8192
[   57.937498] wlan: [1659:I:ANY] __ol_ath_attach: needed_headroom reservation 60
[   57.946550] wlan: [1659:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi2 features 41
[   57.954195] wlan: [1659:I:ANY] ieee80211_cfg80211_radio_attach: ic: 0x93b20500, wdev: 0x93b37c6c, wiphy: 0x92930160, netdev: 0x93b20000
[   57.966537] wlan: [1659:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   57.977614] wlan: [1659:E:QLD] qld_register: Handle or address is NULL
[   57.985493] wlan: [1659:I:ANY] wlan_pdev_operation: num_radios=3, wifi_radios[2].sc = 93b20500_radio_type = 2
[   57.993587] wlan: [1659:I:ANY] init_ath_pci_3_0: 6ath_ol_pci_wifi3.0 :  (Atheros/multi-bss)
[   58.124957] vmap allocation for size 573440 failed: use vmalloc=<size> to increase size.
[   58.125471] vmap allocation for size 102400 failed: use vmalloc=<size> to increase size.
[   58.157545] wlan: [1712:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:a57940c4
[   58.158099] wlan: [1712:I:ANY] init_ath_pci_2_0: 6ath_ol_pci_2_0:  (Atheros/multi-bss)
No Direct-Attach chipsets found.
acfg_tool: Issuing blocking call to wait for events
[   63.949873] ubi3: attaching mtd18
[   64.000542] ubi3: scanning is finished
[   64.004909] ubi3: attached mtd18 (name "log", size 15 MiB)
[   64.004933] ubi3: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[   64.009420] ubi3: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[   64.017529] ubi3: VID header offset: 2048 (aligned 2048), data offset: 4096
[   64.023056] ubi3: good PEBs: 124, bad PEBs: 0, corrupted PEBs: 0
[   64.029850] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128
[   64.036043] ubi3: max/mean erase counter: 21/10, WL threshold: 4096, image sequence number: 3995572352
[   64.043351] ubi3: available PEBs: 0, total reserved PEBs: 124, PEBs reserved for bad PEB handling: 20
[   64.052529] ubi3: background thread "ubi_bgt3d" started, PID 2848
[   64.102402] ubi: mtd18 is already attached to ubi3
[   64.117992] UBIFS (ubi3:0): background thread "ubifs_bgt3_0" started, PID 2859
[   64.131501] UBIFS (ubi3:0): recovery needed
[   64.251466] UBIFS (ubi3:0): recovery completed
[   64.251592] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name "ubilog"
[   64.254874] UBIFS (ubi3:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   64.262424] UBIFS (ubi3:0): FS size: 11427840 bytes (10 MiB, 90 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[   64.272186] UBIFS (ubi3:0): reserved for root: 539765 bytes (527 KiB)
[   64.282415] UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID AE5DD163-E460-4DD9-B14D-50FE57710AD0, small LPT model
acfg_tool: Issuing blocking call to wait for events
[   67.976002] vmap allocation for size 1179648 failed: use vmalloc=<size> to increase size.
[   68.081923] ECM init
[   68.081998] ECM database jhash random seed: 0xc1a4b786
[   68.136530] ECM init complete
[   68.161403] ECM OVS Test INIT
qcawifi qcawificfg80211 disable radio wifi0
qcawifi qcawificfg80211 disable radio wifi1
[   75.563689] device eth0 entered promiscuous mode
[   75.576648] br-lan: port 1(eth0) entered forwarding state
[   75.576776] br-lan: port 1(eth0) entered forwarding state
[   75.613045] device eth1.4 entered promiscuous mode
[   75.613073] device eth1 entered promiscuous mode
[   75.623223] br-lan: port 2(eth1.4) entered forwarding state
[   75.623316] br-lan: port 2(eth1.4) entered forwarding state
[   75.657347] device eth1.5 entered promiscuous mode
[   75.657591] br-lan: port 3(eth1.5) entered forwarding state
[   75.661101] br-lan: port 3(eth1.5) entered forwarding state
[   75.682802] MTU change beyond 1500 restricted for low memory profile
[   75.688871] MTU change beyond 1500 restricted for low memory profile
[   75.701959] MTU change beyond 1500 restricted for low memory profile
[   75.707986] MTU change beyond 1500 restricted for low memory profile
qcawifi qcawificfg80211 disable radio wifi2
[   76.547470] br-lan: port 1(eth0) entered disabled state
[   77.616364] br-lan: port 2(eth1.4) entered forwarding state
[   77.656192] br-lan: port 3(eth1.5) entered forwarding state
qcawifi qcawificfg80211: enable radio wifi0
[   83.247022] wlan: [5131:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   83.247303] wlan: [5131:I:ANY] ieee80211_setctry_tryretaining_curchan: [442] Skipping current channel retention during set_country operation
[   83.253009] wlan: [5131:I:ANY] number of channels: 2G = 11 5G = 0, 6G = 0
[   83.267123] wlan: [5131:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: US ret: 0
[   83.653956] wlan: [5207:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :48:bf:74:2f:11:16 ret: 0
[   83.723094] wlan: [5221:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[   83.893087] wlan: [0:I:ANY] ol_ath_set_config_param: Disconnect_timeout value: 10
[   83.958305] wlan: [0:I:ANY] ol_ath_set_config_param: Reconfiguration_timeout value:60
number of vifs: 24g_1 24g_2 24g_3 24g_4
[   84.774597] wlan: [5391:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athe1 : clone params: 0x00000001
[   84.774685] wlan: [5391:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   84.785329] wlan: [5391:I:ANY] osifp_create_wlan_vap: VDEV Create 48:bf:74:2f:11:16
[   84.792981] wlan: [5391:I:ANY] wlan_vap_create: devhandle=0x97fe0500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   84.792981]
[   84.800968] wlan: [5391:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[   84.811527] wlan: [5391:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0
[   84.818372] wlan: [5391:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x33
[   84.832856] wlan: [5391:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[   84.839162] wlan: [5391:I:ANY] MBO Initialized
[   84.852912] wlan: [5391:I:ANY] OCE Initialized
[   84.857183] wlan: [5391:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 31 nss_id -1
[   84.861540] wlan: [5391:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28
[   84.870697] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   84.877163] wlan: [5391:I:ANY] osif_nss_ol_vap_create: vap create 9386b500 : if_num 31
[   84.885336] wlan: [5391:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   84.906232] wlan: [5391:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[   84.906279] wlan: [5391:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   84.922285] wlan: [5391:I:ANY] VAP device athe1 created osifp: (9386b500) os_if: (90590000)
[   86.193594] 8021q: adding VLAN 0 to HW filter on device athe1
[   86.200863] device athe1 entered promiscuous mode
[   86.201420] br-lan: port 4(athe1) entered forwarding state
[   86.204680] br-lan: port 4(athe1) entered forwarding state
[   86.247475] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-0(athe1):ACS Params
[   86.247514] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20|
[   86.647594] wlan: [5583:I:ANY] ol_ath_setTxPowerLimit: max tx power 63, Limiting to default Max
[   86.647690] wlan: [5583:I:ANY] ol_ath_setTxPowerLimit: ret=0
[   86.655149] wlan: [5583:I:ANY] ieee80211com_set_txpowerlimit: ic->ic_txpowlimit=40
[   86.690342] wlan: [5588:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athe2 : clone params: 0x00000001
[   86.690431] wlan: [5588:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   86.702113] wlan: [5588:I:ANY] osifp_create_wlan_vap: VDEV Create 4e:bf:74:2f:11:16
[   86.709485] wlan: [5588:I:ANY] wlan_vap_create: devhandle=0x97fe0500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   86.709485]
[   86.717791] wlan: [5588:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[   86.728293] wlan: [5588:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0
[   86.734299] wlan: [5588:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x33
[   86.750026] wlan: [5588:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[   86.755123] wlan: [5588:I:ANY] MBO Initialized
[   86.769805] wlan: [5588:I:ANY] OCE Initialized
[   86.773110] wlan: [5588:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 32 nss_id -1
[   86.778837] wlan: [5588:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28
[   86.788012] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   86.793647] wlan: [5588:I:ANY] osif_nss_ol_vap_create: vap create 97d50500 : if_num 32
[   86.801579] wlan: [5588:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   86.810998] wlan: [5588:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[   86.818620] wlan: [5588:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   86.842713] wlan: [5588:I:ANY] VAP device athe2 created osifp: (97d50500) os_if: (9065c000)
[   88.068387] 8021q: adding VLAN 0 to HW filter on device athe2
[   88.080944] device athe2 entered promiscuous mode
[   88.081388] br-lan: port 5(athe2) entered forwarding state
[   88.084738] br-lan: port 5(athe2) entered forwarding state
[   88.127335] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-1(athe2):ACS Params
[   88.127378] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20|
[   88.133468] wlan: [3025:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress
[   88.196194] br-lan: port 4(athe1) entered forwarding state
[   88.539220] wlan: [5781:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athe3 : clone params: 0x00000001
[   88.539359] wlan: [5781:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   88.550313] wlan: [5781:I:ANY] osifp_create_wlan_vap: VDEV Create 52:bf:74:2f:11:16
[   88.557753] wlan: [5781:I:ANY] wlan_vap_create: devhandle=0x97fe0500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   88.557753]
[   88.568260] wlan: [5781:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[   88.576651] wlan: [5781:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0
[   88.583059] wlan: [5781:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x33
[   88.599114] wlan: [5781:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[   88.603881] wlan: [5781:I:ANY] MBO Initialized
[   88.618586] wlan: [5781:I:ANY] OCE Initialized
[   88.622070] wlan: [5781:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 33 nss_id -1
[   88.626407] wlan: [5781:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28
[   88.635359] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   88.642032] wlan: [5781:I:ANY] osif_nss_ol_vap_create: vap create 97d71500 : if_num 33
[   88.650480] wlan: [5781:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   88.676311] wlan: [5781:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[   88.676364] wlan: [5781:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   88.691342] wlan: [5781:I:ANY] VAP device athe3 created osifp: (97d71500) os_if: (904d4000)
[   89.736864] wlan: [1500:E:ANY] ol_ath_get_chan_grade_info: RF characterization entries is empty
[   89.737600] wlan: [1500:I:ANY] vap-0(athe1): ACS result PCH 6 freq 2437, SCH 10 freq 2457, hw_mode 1 chwidth 40, vht_seg0 8 freq 2447, vht_seg1 0 freq 0
[   89.745041] wlan: [1500:I:ANY] vap-1(athe2): ACS result PCH 6 freq 2437, SCH 10 freq 2457, hw_mode 1 chwidth 40, vht_seg0 8 freq 2447, vht_seg1 0 freq 0
[   89.769612] wlan: [1500:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (22ms)
[   89.824951] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-2.4G
[   89.824988] wlan: [3025:I:ANY] desired hw mode: 29
[   89.830981] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[   89.830981]  Channel is configured already!!
[   89.834737] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[   89.846476] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[   89.970793] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-2.4G1
[   89.970835] wlan: [3025:I:ANY] desired hw mode: 29
[   89.975771] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[   89.975771]  Channel is configured already!!
[   89.995841] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[   89.996089] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[   90.076196] br-lan: port 5(athe2) entered forwarding state
[   90.083597] 8021q: adding VLAN 0 to HW filter on device athe3
[   90.094603] device athe3 entered promiscuous mode
[   90.095587] br-lan: port 6(athe3) entered forwarding state
[   90.098513] br-lan: port 6(athe3) entered forwarding state
[   90.147269] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-2(athe3):ACS Params
[   90.147310] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20|
[   90.153410] wlan: [3025:I:ANY] vap-2(athe3): ACS result PCH 6 freq 2437, SCH 10 freq 2457, hw_mode 1 chwidth 40, vht_seg0 8 freq 2447, vht_seg1 0 freq 0
[   90.264643] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-2.4G2
[   90.264690] wlan: [3025:I:ANY] desired hw mode: 29
[   90.271629] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[   90.271629]  Channel is configured already!!
[   90.275308] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[   90.286280] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[   90.752021] wlan: [6021:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athe4 : clone params: 0x00000001
[   90.752127] wlan: [6021:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   90.762844] wlan: [6021:I:ANY] osifp_create_wlan_vap: VDEV Create 56:bf:74:2f:11:16
[   90.770541] wlan: [6021:I:ANY] wlan_vap_create: devhandle=0x97fe0500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   90.770541]
[   90.779243] wlan: [6021:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[   90.789781] wlan: [6021:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:0|dl_muofdma_bfer:0
[   90.795904] wlan: [6021:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x33
[   90.810754] wlan: [6021:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[   90.818105] wlan: [6021:I:ANY] MBO Initialized
[   90.837015] wlan: [6021:I:ANY] OCE Initialized
[   90.837118] wlan: [6021:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 34 nss_id -1
[   90.840566] wlan: [6021:I:ANY] osif_nss_ol_vap_create: NSS radio_if 28
[   90.849685] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   90.856254] wlan: [6021:I:ANY] osif_nss_ol_vap_create: vap create 9a37a500 : if_num 34
[   90.864612] wlan: [6021:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   90.887227] wlan: [6021:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[   90.887325] wlan: [6021:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   90.904399] wlan: [6021:I:ANY] osif_create_vap_complete: Updating VAP3 channel for mode 29 as per parent VAP0
[   90.910600] wlan: [6021:I:ANY] VAP device athe4 created osifp: (9a37a500) os_if: (906f4000)
[   92.096194] br-lan: port 6(athe3) entered forwarding state
[   92.312730] 8021q: adding VLAN 0 to HW filter on device athe4
[   92.316870] device athe4 entered promiscuous mode
[   92.318085] br-lan: port 7(athe4) entered forwarding state
[   92.322306] br-lan: port 7(athe4) entered forwarding state
[   92.377250] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-3(athe4):ACS Params
[   92.377291] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:29|chwidth:20|
[   92.383393] wlan: [3025:I:ANY] vap-3(athe4): ACS result PCH 6 freq 2437, SCH 10 freq 2457, hw_mode 1 chwidth 40, vht_seg0 8 freq 2447, vht_seg1 0 freq 0
[   92.488893] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-2.4G3
[   92.488936] wlan: [3025:I:ANY] desired hw mode: 29
[   92.494106] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[   92.494106]  Channel is configured already!!
[   92.499743] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[   92.509197] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
qcawifi qcawificfg80211: enable radio wifi1
[   94.316204] br-lan: port 7(athe4) entered forwarding state
[   96.663745] wlan: [7165:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   96.664299] wlan: [7165:E:ANY] dfs_init_chan_state_array: channel state array initialized
[   96.672669] wlan: [7165:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   96.678480] wlan: [7165:I:ANY] ieee80211_setctry_tryretaining_curchan: [442] Skipping current channel retention during set_country operation
[   96.684690] wlan: [7165:I:ANY] number of channels: 2G = 0 5G = 25, 6G = 0
[   96.697644] wlan: [7165:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: US ret: 0
[   96.995256] wlan: [7183:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :48:bf:74:2f:11:17 ret: 0
[   97.041900] wlan: [7186:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[   97.176885] wlan: [0:I:ANY] ol_ath_set_config_param: Disconnect_timeout value: 10
[   97.220798] wlan: [0:I:ANY] ol_ath_set_config_param: Reconfiguration_timeout value:60
number of vifs: 5g_1 5g_2 5g_3 5g_4
[   97.835739] wlan: [7307:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athi1 : clone params: 0x00000001
[   97.835826] wlan: [7307:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   97.846974] wlan: [7307:I:ANY] osifp_create_wlan_vap: VDEV Create 48:bf:74:2f:11:17
[   97.854306] wlan: [7307:I:ANY] wlan_vap_create: devhandle=0x95c20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   97.854306]
[   97.863994] wlan: [7307:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[   97.873085] wlan: [7307:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[   97.879761] wlan: [7307:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73
[   97.894665] wlan: [7307:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[   97.900537] wlan: [7307:I:ANY] MBO Initialized
[   97.914259] wlan: [7307:I:ANY] OCE Initialized
[   97.918496] wlan: [7307:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 35 nss_id -1
[   97.922716] wlan: [7307:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29
[   97.932019] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   97.938294] wlan: [7307:I:ANY] osif_nss_ol_vap_create: vap create 97c53500 : if_num 35
[   97.946703] wlan: [7307:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   97.966259] wlan: [7307:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[   97.966301] wlan: [7307:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   97.982246] wlan: [7307:I:ANY] VAP device athi1 created osifp: (97c53500) os_if: (906c8000)
[   99.085752] 8021q: adding VLAN 0 to HW filter on device athi1
[   99.091034] device athi1 entered promiscuous mode
[   99.091676] br-lan: port 8(athi1) entered forwarding state
[   99.095290] br-lan: port 8(athi1) entered forwarding state
[   99.137415] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-0(athi1):ACS Params
[   99.137456] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:20|
[   99.473112] wlan: [7455:I:ANY] ol_ath_setTxPowerLimit: max tx power 63, Limiting to default Max
[   99.473211] wlan: [7455:I:ANY] ol_ath_setTxPowerLimit: ret=0
[   99.481548] wlan: [7455:I:ANY] ol_ath_setTxPowerLimit: max tx power 63, Limiting to default Max
[   99.486990] wlan: [7455:I:ANY] ol_ath_setTxPowerLimit: wmi_pdev_param_txpower_limit5g, Limiting to default Max limit=40
[   99.495688] wlan: [7455:I:ANY] ol_ath_setTxPowerLimit: ret=0
[   99.506219] wlan: [7455:I:ANY] ieee80211com_set_txpowerlimit: ic->ic_txpowlimit=40
[   99.538568] wlan: [7459:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athi2 : clone params: 0x00000001
[   99.538661] wlan: [7459:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   99.550161] wlan: [7459:I:ANY] osifp_create_wlan_vap: VDEV Create 4e:bf:74:2f:11:17
[   99.557233] wlan: [7459:I:ANY] wlan_vap_create: devhandle=0x95c20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   99.557233]
[   99.565279] wlan: [7459:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[   99.575925] wlan: [7459:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[   99.583209] wlan: [7459:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73
[   99.597104] wlan: [7459:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[   99.603701] wlan: [7459:I:ANY] MBO Initialized
[   99.617243] wlan: [7459:I:ANY] OCE Initialized
[   99.621766] wlan: [7459:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 36 nss_id -1
[   99.625634] wlan: [7459:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29
[   99.635552] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   99.641205] wlan: [7459:I:ANY] osif_nss_ol_vap_create: vap create 93871500 : if_num 36
[   99.650461] wlan: [7459:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   99.676945] wlan: [7459:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[   99.676987] wlan: [7459:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   99.693472] wlan: [7459:I:ANY] VAP device athi2 created osifp: (93871500) os_if: (9066c000)
[  100.750380] br-lan: port 5(athe2) entered disabled state
[  100.877340] 8021q: adding VLAN 0 to HW filter on device athi2
[  100.880674] device athi2 entered promiscuous mode
[  100.882555] br-lan: port 9(athi2) entered forwarding state
[  100.886911] br-lan: port 9(athi2) entered forwarding state
[  100.900300] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-1(athi2):ACS Params
[  100.900521] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:20|
[  100.907245] wlan: [3025:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress
[  101.086174] br-lan: port 8(athi1) entered forwarding state
[  101.281507] wlan: [7626:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athi3 : clone params: 0x00000001
[  101.281614] wlan: [7626:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[  101.293398] wlan: [7626:I:ANY] osifp_create_wlan_vap: VDEV Create 52:bf:74:2f:11:17
[  101.300313] wlan: [7626:I:ANY] wlan_vap_create: devhandle=0x95c20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[  101.300313]
[  101.308823] wlan: [7626:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[  101.319682] wlan: [7626:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[  101.325495] wlan: [7626:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73
[  101.341061] wlan: [7626:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[  101.347282] wlan: [7626:I:ANY] MBO Initialized
[  101.362427] wlan: [7626:I:ANY] OCE Initialized
[  101.364853] wlan: [7626:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 37 nss_id -1
[  101.370511] wlan: [7626:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29
[  101.380392] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[  101.384345] wlan: [7626:I:ANY] osif_nss_ol_vap_create: vap create 97d08500 : if_num 37
[  101.393467] wlan: [7626:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[  101.416247] wlan: [7626:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[  101.416317] wlan: [7626:I:ANY] WLAN-NSS: VAP NSS ops initialized
[  101.433854] wlan: [7626:I:ANY] VAP device athi3 created osifp: (97d08500) os_if: (90778000)
[  101.836336] br-lan: port 6(athe3) entered disabled state
[  102.605687] 8021q: adding VLAN 0 to HW filter on device athi3
[  102.611160] device athi3 entered promiscuous mode
[  102.611744] br-lan: port 10(athi3) entered forwarding state
[  102.615232] br-lan: port 10(athi3) entered forwarding state
[  102.657435] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-2(athi3):ACS Params
[  102.657506] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:20|
[  102.663575] wlan: [3025:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress
[  102.886210] br-lan: port 9(athi2) entered forwarding state
[  102.945108] br-lan: port 7(athe4) entered disabled state
[  103.105907] wlan: [7806:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athi4 : clone params: 0x00000001
[  103.106004] wlan: [7806:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[  103.117789] wlan: [7806:I:ANY] osifp_create_wlan_vap: VDEV Create 56:bf:74:2f:11:17
[  103.124469] wlan: [7806:I:ANY] wlan_vap_create: devhandle=0x95c20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[  103.124469]
[  103.132758] wlan: [7806:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[  103.144792] wlan: [7806:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[  103.150184] wlan: [7806:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73
[  103.166345] wlan: [7806:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[  103.171086] wlan: [7806:I:ANY] MBO Initialized
[  103.184426] wlan: [7806:I:ANY] OCE Initialized
[  103.189209] wlan: [7806:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 38 nss_id -1
[  103.192978] wlan: [7806:I:ANY] osif_nss_ol_vap_create: NSS radio_if 29
[  103.202679] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[  103.208470] wlan: [7806:I:ANY] osif_nss_ol_vap_create: vap create 97d68500 : if_num 38
[  103.216710] wlan: [7806:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[  103.236308] wlan: [7806:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[  103.236351] wlan: [7806:I:ANY] WLAN-NSS: VAP NSS ops initialized
[  103.247846] wlan: [7806:I:ANY] VAP device athi4 created osifp: (97d68500) os_if: (90534000)
[  103.796372] create file error
[  104.363565] 8021q: adding VLAN 0 to HW filter on device athi4
[  104.367422] device athi4 entered promiscuous mode
[  104.368946] br-lan: port 11(athi4) entered forwarding state
[  104.373127] br-lan: port 11(athi4) entered forwarding state
[  104.417450] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-3(athi4):ACS Params
[  104.417490] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:20|
[  104.423584] wlan: [3025:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress
[  104.606170] br-lan: port 10(athi3) entered forwarding state
qcawifi qcawificfg80211: enable radio wifi2
[  105.434903] wlan: [1500:E:ANY] ol_ath_get_chan_grade_info: RF characterization entries is empty
[  105.435697] wlan: [1500:I:ANY] vap-0(athi1): ACS result PCH 36 freq 5180, SCH 44 freq 5220, hw_mode 2 chwidth 160, vht_seg0 50 freq 5250, vht_seg1 0 freq 0
[  105.442801] wlan: [1500:I:ANY] vap-1(athi2): ACS result PCH 36 freq 5180, SCH 44 freq 5220, hw_mode 2 chwidth 160, vht_seg0 50 freq 5250, vht_seg1 0 freq 0
[  105.456598] wlan: [1500:I:ANY] vap-2(athi3): ACS result PCH 36 freq 5180, SCH 44 freq 5220, hw_mode 2 chwidth 160, vht_seg0 50 freq 5250, vht_seg1 0 freq 0
[  105.470473] wlan: [1500:I:ANY] vap-3(athi4): ACS result PCH 36 freq 5180, SCH 44 freq 5220, hw_mode 2 chwidth 160, vht_seg0 50 freq 5250, vht_seg1 0 freq 0
[  105.496506] wlan: [1500:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (50ms)
[  105.541722] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-5G
[  105.541778] wlan: [3025:I:ANY] desired hw mode: 31
[  105.548510] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[  105.548510]  Channel is configured already!!
[  105.552194] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[  105.569658] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[  105.705382] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-5G1
[  105.705435] wlan: [3025:I:ANY] desired hw mode: 31
[  105.716001] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[  105.716001]  Channel is configured already!!
[  105.716362] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[  105.725796] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[  105.843506] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-5G2
[  105.843554] wlan: [3025:I:ANY] desired hw mode: 31
[  105.849906] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[  105.849906]  Channel is configured already!!
[  105.853136] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[  105.865200] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[  105.967847] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-5G3
[  105.967909] wlan: [3025:I:ANY] desired hw mode: 31
[  105.978129] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[  105.978129]  Channel is configured already!!
[  105.978351] wlan: [3025:E:MBSSIE] ieee80211_ucfg_set_txvap: MBSSID is not enabled
[  105.989328] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[  106.366184] br-lan: port 11(athi4) entered forwarding state
[  108.038456] wlan: [8750:I:ANY] wlan_scan_update_channel_list: num_chan: 51
[  108.038637] wlan: [8750:I:ANY] ieee80211_setctry_tryretaining_curchan: [442] Skipping current channel retention during set_country operation
[  108.044263] wlan: [8750:I:ANY] number of channels: 2G = 0 5G = 0, 6G = 51
[  108.057216] wlan: [8750:I:ANY] wlan_cfg80211_set_country: wlan_cfg80211_set_country: Country: US ret: 0
[  108.359688] wlan: [8770:I:MBSSIE] ol_ath_assign_mbssid_ref_bssid: MBSSID reference bssid is 4a:bf:74:2f:11:18 soc: soc2 pdev: wifi2
[  108.359760] wlan: [8770:I:ANY] wlan_cfg80211_set_hwaddr: wlan_cfg80211_set_hwaddr :48:bf:74:2f:11:18 ret: 0
[  108.432176] wlan: [8788:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[  108.567095] wlan: [0:I:ANY] ol_ath_set_config_param: Disconnect_timeout value: 10
[  108.611977] wlan: [0:I:ANY] ol_ath_set_config_param: Reconfiguration_timeout value:60
[  108.802628] create file error
number of vifs: 6g_1 6g_2
[  109.648746] wlan: [9003:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athx1 : clone params: 0x00000001
[  109.648830] wlan: [9003:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 0
[  109.661824] wlan: [9003:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[  109.667845] wlan: [9003:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 0
[  109.681484] wlan: [9003:I:ANY] osifp_create_wlan_vap: VDEV Create 4a:bf:74:2f:11:18
[  109.683472] wlan: [9003:I:ANY] wlan_vap_create: devhandle=0x93b20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[  109.683472]
[  109.691115] wlan: [9003:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 0
[  109.703064] wlan: [9003:I:MBSSIE] ieee80211_mbssid_setup: Added first VAP (8f878000), max_bssid_indicator:4
[  109.712055] wlan: [9003:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[  109.720253] wlan: [9003:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[  109.727718] wlan: [9003:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73
[  109.745908] wlan: [9003:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[  109.747825] wlan: [9003:I:ANY] MBO Initialized
[  109.761589] wlan: [9003:I:ANY] OCE Initialized
[  109.765768] wlan: [9003:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 39 nss_id -1
[  109.771031] wlan: [9003:I:ANY] osif_nss_ol_vap_create: NSS radio_if 30
[  109.779372] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[  109.786309] wlan: [9003:I:ANY] osif_nss_ol_vap_create: vap create 9826f500 : if_num 39
[  109.793938] wlan: [9003:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[  109.816326] wlan: [9003:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[  109.816366] wlan: [9003:I:ANY] WLAN-NSS: VAP NSS ops initialized
[  109.827509] wlan: [9003:I:ANY] VAP device athx1 created osifp: (9826f500) os_if: (8f878000)
[  111.448189] mc_attach: enabled snooping on br-lan.
[  112.194530] 8021q: adding VLAN 0 to HW filter on device athx1
[  112.199143] device athx1 entered promiscuous mode
[  112.199997] br-lan: port 12(athx1) entered forwarding state
[  112.204127] br-lan: port 12(athx1) entered forwarding state
[  112.318779] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-0(athx1):ACS Params
[  112.318825] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:160|
[  113.203402] wlan: [9424:I:ANY] ol_ath_setTxPowerLimit: max tx power 63, Limiting to default Max
[  113.203527] wlan: [9424:I:ANY] ol_ath_setTxPowerLimit: ret=0
[  113.213965] wlan: [9424:I:ANY] ol_ath_setTxPowerLimit: max tx power 63, Limiting to default Max
[  113.217294] wlan: [9424:I:ANY] ol_ath_setTxPowerLimit: wmi_pdev_param_txpower_limit5g, Limiting to default Max limit=40
[  113.226077] wlan: [9424:I:ANY] ol_ath_setTxPowerLimit: ret=0
[  113.242610] wlan: [9424:I:ANY] ieee80211com_set_txpowerlimit: ic->ic_txpowlimit=40
[  113.328682] wlan: [9438:I:ANY] wlan_cfg80211_add_virtual_intf: proprietary mode 6 for interface: athx2 : clone params: 0x00000001
[  113.328768] wlan: [9438:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 1
[  113.343681] wlan: [9438:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[  113.356764] wlan: [9438:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 1
[  113.356819] wlan: [9438:I:ANY] osifp_create_wlan_vap: VDEV Create 4a:bf:74:2f:11:19
[  113.364239] wlan: [9438:I:ANY] wlan_vap_create: devhandle=0x93b20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[  113.364239]
[  113.372781] wlan: [9438:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 1
[  113.383667] wlan: [9438:I:MBSSIE] ieee80211_mbssid_assign_and_sanitize_bssid_idx: bssid_idx is: 1
[  113.392766] wlan: [9438:I:MBSSIE] ieee80211_mbssid_setup: Added non-transmitting VAP (8f84c000) with BSSID index:1
[  113.392766]
[  113.403409] wlan: [9438:I:MBSSIE] ieee80211_vap_setup: Setting DTIM: 4
[  113.412475] wlan: [9438:I:ANY] ol_ath_vap_set_param: Setting SGI value: 1
[  113.419729] wlan: [9438:I:ANY] ol_ath_vap_set_param: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:0|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[  113.425401] wlan: [9438:I:ANY] ol_ath_vap_set_param: he_bf_cap=0x73
[  113.440684] wlan: [9438:I:ANY] ol_ath_vap_set_param: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[  113.448253] wlan: [9438:I:ANY] MBO Initialized
[  113.460873] wlan: [9438:I:ANY] OCE Initialized
[  113.464222] wlan: [9438:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 40 nss_id -1
[  113.468651] wlan: [9438:I:ANY] osif_nss_ol_vap_create: NSS radio_if 30
[  113.478631] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[  113.484026] wlan: [9438:I:ANY] osif_nss_ol_vap_create: vap create 9069c500 : if_num 40
[  113.493463] wlan: [9438:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[  113.501290] wlan: [0:I:ANY] osif_nss_wifili_vdev_get_mpsta_vdevid: Get MPSTA: vdev is NULL
[  113.508645] wlan: [0:E:ANY] ol_peer_map_set_isolation: vdev is NULL, not processing mic error
[  113.516995] wlan: [0:E:ANY] ol_peer_create_response_event_handler: peer_create_resp: mac: 4a:bf:74:2f:11:19 vdevid: 1 status: 0 Unable to find vdev
[  113.526675] wlan: [9438:I:ANY] osif_create_vap_complete: TX Checksum:1|SG:1|TSO:1|LRO:0
[  113.538731] wlan: [9438:I:ANY] WLAN-NSS: VAP NSS ops initialized
[  113.563140] wlan: [9438:I:ANY] VAP device athx2 created osifp: (9069c500) os_if: (8f84c000)
[  114.196203] br-lan: port 12(athx1) entered forwarding state
[  115.197612] 8021q: adding VLAN 0 to HW filter on device athx2
[  115.202003] device athx2 entered promiscuous mode
[  115.203283] br-lan: port 13(athx2) entered forwarding state
[  115.207231] br-lan: port 13(athx2) entered forwarding state
[  115.288112] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: vap-1(athx2):ACS Params
[  115.288160] wlan: [3025:I:ANY] wlan_cfg80211_do_acs: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:31|chwidth:160|
[  115.298527] wlan: [3025:E:ANY] ieee80211_autoselect_infra_bss_channel: ACS is in progress
****** Starting QDSS for qcn6122 pci0 ********
****** Starting QDSS for qcn6122 pci1 ********
[  116.418898] coresight-funnel 6130000.funnel: FUNNEL inport 5 enabled
[  116.419228] coresight-funnel 6041000.funnel: FUNNEL inport 7 enabled
[  116.425406] coresight-tmc 6048000.tmc: TMC enabled
[  116.431895] coresight-replicator-qcom 6046000.replicator: REPLICATOR enabled
[  116.435392] coresight-tmc 6047000.tmc: TMC enabled
[  116.443435] coresight-funnel 6041000.funnel: FUNNEL inport 7 enabled
[  116.447544] coresight-stm 6002000.stm: STM tracing enabled
***** QDSS Tracing Configuration completed *******
****** Starting QDSS for Integrated ********
[  117.206190] br-lan: port 13(athx2) entered forwarding state
[  117.405645] sh (9494): drop_caches: 3
**** Platform Name: ap-mp03.5-c1 *****
Copy ART caldata from /dev/mtdblock13 to /tmp/virtual_art.bin
[  120.959054] br-lan: port 9(athi2) entered disabled state
[  121.988140] sh (10156): drop_caches: 3
[  122.239679] br-lan: port 10(athi3) entered disabled state
[  123.367819] br-lan: port 11(athi4) entered disabled state
[  128.490722] wlan: [1500:E:ANY] ol_ath_get_chan_grade_info: RF characterization entries is empty
[  128.491871] wlan: [1500:I:ANY] vap-0(athx1): ACS result PCH 33 freq 6115, SCH 41 freq 6155, hw_mode 2 chwidth 160, vht_seg0 47 freq 6185, vht_seg1 0 freq 0
[  128.498975] wlan: [1500:I:ANY] vap-1(athx2): ACS result PCH 33 freq 6115, SCH 41 freq 6155, hw_mode 2 chwidth 160, vht_seg0 47 freq 6185, vht_seg1 0 freq 0
[  128.512427] wlan: [1500:I:ANY] ieee80211_acs_scan_evhandler: [EXT] lock held duration (22ms)
[  128.569035] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-6G
[  128.569071] wlan: [3025:I:ANY] desired hw mode: 31
[  128.573606] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[  128.573606]  Channel is configured already!!
[  128.579641] wlan: [3025:I:MBSSIE] ieee80211_mbssid_txvap_set: Tx VAP is set for vap0
[  128.590199] wlan: [3025:I:MBSSIE] ieee80211_mbssid_txvap_set: First vap created is chosen as tx-vap
[  128.596947] wlan: [3025:I:MBSSIE] ieee80211_mbssid_txvap_set: Initializing AID bit map
[  128.605464] wlan: [3025:I:ANY] ol_ath_update_max_pp_and_beacon_pos: max_pp: 4
[  128.614142] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[  128.727596] wlan: [3025:I:ANY] DES SSID SET=EG3661M-1111-6G1
[  128.727633] wlan: [3025:I:ANY] desired hw mode: 31
[  128.732400] wlan: [3025:E:MBSSIE] wlan_set_param: ++++DTIM for non-Tx vap in case of EMA AP must be multiple of max-PP: 4
[  128.737520] wlan: [3025:I:ANY] ieee80211_ucfg_set_freq_internal:
[  128.737520]  Channel is configured already!!
[  128.748663] wlan: [3025:I:MBSSIE] ieee80211_ucfg_set_txvap: vap0 is already configured as Tx vap
[  128.758530] wlan: [3025:I:ANY] ol_ath_update_max_pp_and_beacon_pos: max_pp: 4
[  128.767571] wlan: [0:I:ANY] wlan_acs_start_scan_report: [EXT] Invoking ACS module for ACS report
[  129.204663] wlan: [0:I:CMN_MLME] mlme_ext_vap_up: Enabling FILS in 6Ghz AP
[  129.209894] wlan: [0:I:MBSSIE] ieee80211_mbssid_get_num_vaps_in_mbss_cache: num_vaps: 2
[  129.580815] br-lan: port 13(athx2) entered disabled state
[  151.621224] MTU change beyond 1500 restricted for low memory profile
[  151.734683] MTU change beyond 1500 restricted for low memory profile
[  152.069072] MTU change beyond 1500 restricted for low memory profile
[  152.306245] MTU change beyond 1500 restricted for low memory profile

BaiCPE login: admin
Password:
login: can't change directory to '/home/admin'
Please press Enter to activate this console.

BaiCPE login: root
Password:
Login incorrect
BaiCPE login: admin
Password:
login: can't change directory to '/home/admin'
Please press Enter to activate this console.
s