API tools faq
paste
Advertisement
gaston0902

Untitled

gaston0902
Sep 30th, 2022
66
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.03 KB | None | 0 0
raw download clone embed print report
  1. <break x 120>
  2. <0xfa><0xf3>K<0xea><0xca>␊<0x95>␊i<0x15><0xd4><0xa9><0xaa>j<0x94><0x02><0x82>j<0xa4><0xa4>II⇥ <0xd2>U,.+<0xcb><0xeb><0x16>R⇥ <0x92>V,<0x16><0xa4>(<0xaa>(KH]<0xae>Z<0xeb><0x16><0x12>V<0x96>V<0xac><0x17><0x8b><0x17>R<0x96><0xcb>WK<0xd7><0xcb><0xab><0xab><0x96><0x8b>WH<0xa8>HhU<0x16><0x17>W-<0xeb><0x16>R<0x17>.<0xa4>XH<0x9c><0x98>0x480 lcd console (overscan 0x0)␍
  3. ␊dotclock: 33000kHz = 33000kHz: (1 * 3MHz * 66) / 6␍
  4. ␊In: serial@01c28000␍
  5. ␊Out: serial@01c28000␍
  6. ␊Err: serial@01c28000␍
  7. ␊Net: g<0xe7><0xd1><0x85><0xc9><0xd1><0xa5><0xb9><0x9d><0x81><0xaa>M⇥ <0xb9>rrj<0xa4><0xe4><0xea><0x0b><0xd2><0xd6><0xcb><0x8b><0x97><0xd7><0x8b><0x8b><0xab><0x96><0xd7>.$<0xd6><0xab><0x97><0x8b>VH<0xf8>Hit any key to stop autoboot: 2 <0x08><0x08><0x08> 1 <0x08><0x08><0x08> 0 ␍
  8. ␊reading zImage␍
  9. ␊4223960 bytes read in 259 ms (15.6 MiB/s)␍
  10. ␊reading sun8i-v3s-licheepi-zero-with-800x480-lcd.dtb␍
  11. ␊11593 bytes read in 27 ms (418.9 KiB/s)␍
  12. ␊## Flattened Device Tree blob at 43000000␍
  13. ␊ Booting using the fdt blob at 0x43000000␍
  14. ␊ Loading Device Tree to 42dfa000, end 42dffd48 ... OK␍
  15. ␊␍
  16. ␊Starting kernel ...␍
  17. ␊␍
  18. ␊[ 0.000000] Booting Linux on physical CPU 0x0␍
  19. ␊[ 0.000000] Linux version 5.2.0-licheepi-zero+ (gaston@gaston-VirtualBox) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12)) #1 SMP Thu Sep 29 21:34:03 -03 2022␍
  20. ␊[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d␍
  21. ␊[ 0.000000] CPU: div instructions available: patching division code␍
  22. ␊[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache␍
  23. ␊[ 0.000000] OF: fdt: Machine model: Lichee Pi Zero␍
  24. ␊[ 0.000000] Memory policy: Data cache writealloc␍
  25. ␊[ 0.000000] percpu: Embedded 16 pages/cpu s34508 r8192 d22836 u65536␍
  26. ␊[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15883␍
  27. ␊[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200 panic=10 rootwait root=/dev/mmcblk0p2 earlyprintk rw vt.global_cursor_default=0␍
  28. ␊[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)␍
  29. ␊[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)␍
  30. ␊[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off␍
  31. ␊[ 0.000000] Memory: 53548K/64036K available (6144K kernel code, 302K rwdata, 1696K rodata, 1024K init, 252K bss, 10488K reserved, 0K cma-reserved, 0K highmem)␍
  32. ␊[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1␍
  33. ␊[ 0.000000] rcu: Hierarchical RCU implementation.␍
  34. ␊[ 0.000000] rcu: ⇥ RCU event tracing is enabled.␍
  35. ␊[ 0.000000] rcu: ⇥ RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.␍
  36. ␊[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.␍
  37. ␊[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1␍
  38. ␊[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16␍
  39. ␊[ 0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x490 with crng_init=0␍
  40. ␊[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).␍
  41. ␊[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns␍
  42. ␊[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns␍
  43. ␊[ 0.000018] Switching to timer-based delay loop, resolution 41ns␍
  44. ␊[ 0.000204] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns␍
  45. ␊[ 0.000435] Console: colour dummy device 80x30␍
  46. ␊[ 0.000726] printk: console [tty0] enabled␍
  47. ␊[ 0.000782] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)␍
  48. ␊[ 0.000813] pid_max: default: 32768 minimum: 301␍
  49. ␊[ 0.000988] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
  50. ␊[ 0.001022] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
  51. ␊[ 0.001840] CPU: Testing write buffer coherency: ok␍
  52. ␊[ 0.002395] /cpus/cpu@0 missing clock-frequency property␍
  53. ␊[ 0.002445] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000␍
  54. ␊[ 0.003272] Setting up static identity map for 0x40100000 - 0x40100060␍
  55. ␊[ 0.003514] rcu: Hierarchical SRCU implementation.␍
  56. ␊[ 0.004078] smp: Bringing up secondary CPUs ...␍
  57. ␊[ 0.004122] smp: Brought up 1 node, 1 CPU␍
  58. ␊[ 0.004139] SMP: Total of 1 processors activated (48.00 BogoMIPS).␍
  59. ␊[ 0.004154] CPU: All CPU(s) started in SVC mode.␍
  60. ␊[ 0.005258] devtmpfs: initialized␍
  61. ␊[ 0.008744] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5␍
  62. ␊[ 0.009081] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns␍
  63. ␊[ 0.009137] futex hash table entries: 256 (order: 2, 16384 bytes, linear)␍
  64. ␊[ 0.009396] pinctrl core: initialized pinctrl subsystem␍
  65. ␊[ 0.010605] NET: Registered protocol family 16␍
  66. ␊[ 0.011180] DMA: preallocated 256 KiB pool for atomic coherent allocations␍
  67. ␊[ 0.012463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.␍
  68. ␊[ 0.012508] hw-breakpoint: maximum watchpoint size is 8 bytes.␍
  69. ␊[ 0.036110] SCSI subsystem initialized␍
  70. ␊[ 0.036406] usbcore: registered new interface driver usbfs␍
  71. ␊[ 0.036497] usbcore: registered new interface driver hub␍
  72. ␊[ 0.036619] usbcore: registered new device driver usb␍
  73. ␊[ 0.036853] mc: Linux media interface: v0.10␍
  74. ␊[ 0.036909] videodev: Linux video capture interface: v2.00␍
  75. ␊[ 0.037105] FPGA manager framework␍
  76. ␊[ 0.037186] Advanced Linux Sound Architecture Driver Initialized.␍
  77. ␊[ 0.038556] clocksource: Switched to clocksource arch_sys_counter␍
  78. ␊[ 0.051091] NET: Registered protocol family 2␍
  79. ␊[ 0.051952] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)␍
  80. ␊[ 0.052021] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)␍
  81. ␊[ 0.052060] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)␍
  82. ␊[ 0.052094] TCP: Hash tables configured (established 1024 bind 1024)␍
  83. ␊[ 0.052256] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)␍
  84. ␊[ 0.052319] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)␍
  85. ␊[ 0.052640] NET: Registered protocol family 1␍
  86. ␊[ 0.054587] Initialise system trusted keyrings␍
  87. ␊[ 0.055002] workingset: timestamp_bits=30 max_order=14 bucket_order=0␍
  88. ␊[ 0.098920] Key type asymmetric registered␍
  89. ␊[ 0.098964] Asymmetric key parser 'x509' registered␍
  90. ␊[ 0.099079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)␍
  91. ␊[ 0.099105] io scheduler mq-deadline registered␍
  92. ␊[ 0.099119] io scheduler kyber registered␍
  93. ␊[ 0.100196] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO␍
  94. ␊[ 0.104006] sun8i-v3s-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver␍
  95. ␊[ 0.104473] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pb not found, using dummy regulator␍
  96. ␊[ 0.105248] pwm-backlight backlight: backlight supply power not found, using dummy regulator␍
  97. ␊[ 0.174919] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled␍
  98. ␊[ 0.178249] printk: console [ttyS0] disabled␍
  99. ␊[ 0.198602] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 34, base_baud = 1500000) is a U6_16550A␍
  100. ␊[ 0.725637] printk: console [ttyS0] enabled␍
  101. ␊[ 0.731638] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator␍
  102. ␊[ 0.766323] panel-simple panel: panel supply power not found, using dummy regulator␍
  103. ␊[ 0.776079] libphy: Fixed MDIO Bus: probed␍
  104. ␊[ 0.780527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver␍
  105. ␊[ 0.787071] ehci-platform: EHCI generic platform driver␍
  106. ␊[ 0.792638] ehci-platform 1c1a000.usb: EHCI Host Controller␍
  107. ␊[ 0.798269] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1␍
  108. ␊[ 0.806298] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000␍
  109. ␊[ 0.838564] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00␍
  110. ␊[ 0.845800] hub 1-0:1.0: USB hub found␍
  111. ␊[ 0.849805] hub 1-0:1.0: 1 port detected␍
  112. ␊[ 0.854449] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver␍
  113. ␊[ 0.860797] ohci-platform: OHCI generic platform driver␍
  114. ␊[ 0.866371] ohci-platform 1c1a400.usb: Generic Platform OHCI controller␍
  115. ␊[ 0.873116] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2␍
  116. ␊[ 0.881128] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400␍
  117. ␊[ 0.953695] hub 2-0:1.0: USB hub found␍
  118. ␊[ 0.957560] hub 2-0:1.0: 1 port detected␍
  119. ␊[ 0.964940] usbcore: registered new interface driver usb-storage␍
  120. ␊[ 0.972598] sun6i-rtc 1c20400.rtc: registered as rtc0␍
  121. ␊[ 0.977689] sun6i-rtc 1c20400.rtc: RTC enabled␍
  122. ␊[ 0.982433] i2c /dev entries driver␍
  123. ␊[ 0.987402] input: ns2009_ts as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0048/input/input0␍
  124. ␊[ 0.997171] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)␍
  125. ␊[ 1.005931] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator␍
  126. ␊[ 1.041221] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB␍
  127. ␊[ 1.048852] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator␍
  128. ␊[ 1.060291] usbcore: registered new interface driver usbhid␍
  129. ␊[ 1.065894] usbhid: USB HID core driver␍
  130. ␊[ 1.072620] Initializing XFRM netlink socket␍
  131. ␊[ 1.076970] NET: Registered protocol family 17␍
  132. ␊[ 1.082149] Registering SWP/SWPB emulation handler␍
  133. ␊[ 1.088048] Loading compiled-in X.509 certificates␍
  134. ␊[ 1.098291] simple-framebuffer 43e89000.framebuffer: framebuffer at 0x43e89000, 0x177000 bytes, mapped to 0x(ptrval)␍
  135. ␊[ 1.109000] simple-framebuffer 43e89000.framebuffer: format=x8r8g8b8, mode=800x480x32, linelength=3200␍
  136. ␊[ 1.125235] Console: switching to colour frame buffer device 100x30␍
  137. ␊[ 1.141519] simple-framebuffer 43e89000.framebuffer: fb0: simplefb registered!␍
  138. ␊[ 1.153885] sun8i-v3s-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pe not found, using dummy regulator␍
  139. ␊[ 1.173979] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc0746880)␍
  140. ␊[ 1.185535] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0743b7c)␍
  141. ␊[ 1.197261] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).␍
  142. ␊[ 1.207855] [drm] No driver support for vblank timestamp query.␍
  143. ␊[ 1.217734] fb0: switching to sun4i-drm-fb from simple␍
  144. ␊[ 1.227716] Console: switching to colour dummy device 80x30␍
  145. ␊[ 1.234459] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0␍
  146. ␊[ 1.271793] mmc0: host does not support reading read-only switch, assuming write-enable␍
  147. ␊[ 1.273829] mmc0: new high speed SDHC card at address 1234␍
  148. ␊[ 1.275679] mmcblk0: mmc0:1234 SA04G 3.71 GiB ␍
  149. ␊[ 1.277679] mmcblk0: p1 p2␍
  150. ␊[ 1.294688] Console: switching to colour frame buffer device 100x30␍
  151. ␊[ 1.359828] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device␍
  152. ␊[ 1.370967] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator␍
  153. ␊[ 1.388967] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver␍
  154. ␊[ 1.397996] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3␍
  155. ␊[ 1.410461] hub 3-0:1.0: USB hub found␍
  156. ␊[ 1.417641] hub 3-0:1.0: 1 port detected␍
  157. ␊[ 1.426131] sun6i-rtc 1c20400.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)␍
  158. ␊[ 1.437815] vcc3v0: disabling␍
  159. ␊[ 1.444147] vcc5v0: disabling␍
  160. ␊[ 1.450349] ALSA device list:␍
  161. ␊[ 1.456381] No soundcards found.␍
  162. ␊[ 1.897958] random: fast init done␍
  163. ␊[ 1.906223] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)␍
  164. ␊[ 1.917688] VFS: Mounted root (ext4 filesystem) on device 179:2.␍
  165. ␊[ 1.928275] devtmpfs: mounted␍
  166. ␊[ 1.935603] Freeing unused kernel memory: 1024K␍
  167. ␊[ 1.943294] Run /sbin/init as init process␍
  168. ␊[ 2.135938] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)␍
  169. ␊Starting syslogd: OK␍
  170. ␊Starting klogd: OK␍
  171. ␊Running sysctl: OK␍
  172. ␊[ 2.378738] usb 2-1: new full-speed USB device number 2 using ohci-platform␍
  173. ␊Starting mdev... OK␍
  174. ␊[ 2.666441] input: 2.4G Composite Devic as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.0/0003:0627:697D.0001/input/input1␍
  175. ␊[ 2.749878] hid-generic 0003:0627:697D.0001: input: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-1c1a400.usb-1/input0␍
  176. ␊[ 2.815097] input: 2.4G Composite Devic Mouse as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input2␍
  177. ␊[ 2.889225] input: 2.4G Composite Devic Consumer Control as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input3␍
  178. ␊[ 2.979442] input: 2.4G Composite Devic System Control as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:0627:697D.0002/input/input4␍
  179. ␊[ 3.038949] hid-generic 0003:0627:697D.0002: input: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-1c1a400.usb-1/input1␍
  180. ␊[ 3.717488] mousedev: PS/2 mouse device common for all mice␍
  181. ␊Saving random seed: [ 3.814323] random: dd: uninitialized urandom read (512 bytes read)␍
  182. ␊OK␍
  183. ␊Mounting cgroupfs hierarchy: OK␍
  184. ␊Starting iptables: OK␍
  185. ␊Starting network: Waiting for interface eth0 to appear............... timeout!␍
  186. ␊run-parts: /etc/network/if-pre-up.d/wait_iface: exit status 1␍
  187. ␊FAIL␍
  188. ␊Starting dockerd: OK␍
  189. ␊
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!