Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
- [ 0.000000] Linux version 4.19.45_1 (void-buildslave@a-hel-fi) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Wed May 22 19:09:23 UTC 2019
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.45_1 root=UUID=2b87177d-9417-47f1-932f-172bbd37ae87 ro loglevel=4 slub_debug=P page_poison=1
- [ 0.000000] Disabled fast string operations
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c16f6fff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000c16f7000-0x00000000cae9efff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000cae9f000-0x00000000caf9efff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000caf9f000-0x00000000caffefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000cf9fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffd90000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: FUJITSU LIFEBOOK E751/FJNB223, BIOS Version 1.22 04/26/2013
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2494.119 MHz processor
- [ 0.002006] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.002009] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.002015] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
- [ 0.002018] MTRR default type: uncachable
- [ 0.002019] MTRR fixed ranges enabled:
- [ 0.002020] 00000-9FFFF write-back
- [ 0.002021] A0000-BFFFF uncachable
- [ 0.002022] C0000-FFFFF write-protect
- [ 0.002023] MTRR variable ranges enabled:
- [ 0.002024] 0 base 0FFC00000 mask FFFC00000 write-protect
- [ 0.002025] 1 base 000000000 mask F80000000 write-back
- [ 0.002026] 2 base 080000000 mask FC0000000 write-back
- [ 0.002027] 3 base 0C0000000 mask FE0000000 write-back
- [ 0.002027] 4 base 0D0000000 mask FF0000000 uncachable
- [ 0.002028] 5 base 0CC000000 mask FFC000000 uncachable
- [ 0.002029] 6 base 0CB000000 mask FFF000000 uncachable
- [ 0.002030] 7 base 100000000 mask F00000000 write-back
- [ 0.002031] 8 base 200000000 mask FC0000000 write-back
- [ 0.002031] 9 base 230000000 mask FF0000000 uncachable
- [ 0.002727] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.002828] last_pfn = 0xc16f7 max_arch_pfn = 0x400000000
- [ 0.013721] Scanning 1 areas for low memory corruption
- [ 0.013723] reserving inaccessible SNB gfx pages
- [ 0.013728] BRK [0x13e801000, 0x13e801fff] PGTABLE
- [ 0.013730] BRK [0x13e802000, 0x13e802fff] PGTABLE
- [ 0.013731] BRK [0x13e803000, 0x13e803fff] PGTABLE
- [ 0.013772] BRK [0x13e804000, 0x13e804fff] PGTABLE
- [ 0.013774] BRK [0x13e805000, 0x13e805fff] PGTABLE
- [ 0.013925] BRK [0x13e806000, 0x13e806fff] PGTABLE
- [ 0.013935] BRK [0x13e807000, 0x13e807fff] PGTABLE
- [ 0.013946] BRK [0x13e808000, 0x13e808fff] PGTABLE
- [ 0.013999] BRK [0x13e809000, 0x13e809fff] PGTABLE
- [ 0.014136] RAMDISK: [mem 0x31c5f000-0x34e26fff]
- [ 0.014144] ACPI: Early table checksum verification disabled
- [ 0.014192] ACPI: RSDP 0x00000000000F00E0 000024 (v02 FUJ )
- [ 0.014195] ACPI: XSDT 0x00000000CAFFE120 00009C (v01 FUJ PC 01160000 FUJ 00000001)
- [ 0.014201] ACPI: FACP 0x00000000CAFEE000 0000F4 (v03 FUJ PC 01160000 FUJ 00000001)
- [ 0.014206] ACPI: DSDT 0x00000000CAFF1000 008F48 (v02 FUJ FJNB223 01160000 INTL 20061109)
- [ 0.014209] ACPI: FACS 0x00000000CAF42000 000040
- [ 0.014212] ACPI: FACS 0x00000000CAF42000 000040
- [ 0.014214] ACPI: SLIC 0x00000000CAFFD000 000176 (v01 FUJ PC 01160000 FUJ 00000001)
- [ 0.014217] ACPI: SSDT 0x00000000CAFFC000 00034F (v01 FUJ SataAhci 00000001 INTL 20061109)
- [ 0.014220] ACPI: SSDT 0x00000000CAFFB000 0002C1 (v01 FUJ BayAhci2 00000001 INTL 20061109)
- [ 0.014223] ACPI: SSDT 0x00000000CAFFA000 0000B6 (v02 FUJ DockSsdt 00000001 INTL 20061109)
- [ 0.014226] ACPI: ASF! 0x00000000CAFF0000 0000A5 (v32 FUJ PC 00000001 PTL 00000001)
- [ 0.014229] ACPI: HPET 0x00000000CAFED000 000038 (v01 FUJ PC 00000001 PTL 00000001)
- [ 0.014232] ACPI: APIC 0x00000000CAFEC000 000098 (v01 FUJ PC 00000001 PTL 00000001)
- [ 0.014235] ACPI: MCFG 0x00000000CAFEB000 00003C (v01 FUJ PC 00000001 PTL 00000001)
- [ 0.014238] ACPI: TCPA 0x00000000CAFEA000 000032 (v02 PTL CRESTLN 06040000 00005A52)
- [ 0.014241] ACPI: SSDT 0x00000000CAFE9000 0007C2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
- [ 0.014244] ACPI: SSDT 0x00000000CAFE8000 0009F5 (v01 PmRef CpuPm 00003000 INTL 20061109)
- [ 0.014247] ACPI: UEFI 0x00000000CAFE7000 00003E (v01 FUJ PC 00000001 PTL 00000001)
- [ 0.014250] ACPI: UEFI 0x00000000CAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
- [ 0.014253] ACPI: UEFI 0x00000000CAFE5000 000256 (v01 FUJ PC 00000001 PTL 00000001)
- [ 0.014261] ACPI: Local APIC address 0xfee00000
- [ 0.014362] No NUMA configuration found
- [ 0.014363] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
- [ 0.014367] NODE_DATA(0) allocated [mem 0x22fdf7000-0x22fdfbfff]
- [ 0.014403] Zone ranges:
- [ 0.014404] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.014406] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.014407] Normal [mem 0x0000000100000000-0x000000022fdfffff]
- [ 0.014408] Device empty
- [ 0.014409] Movable zone start for each node
- [ 0.014409] Early memory node ranges
- [ 0.014410] node 0: [mem 0x0000000000001000-0x000000000009cfff]
- [ 0.014411] node 0: [mem 0x0000000000100000-0x00000000c16f6fff]
- [ 0.014411] node 0: [mem 0x0000000100000000-0x000000022fdfffff]
- [ 0.014415] Reserved but unavailable: 100 pages
- [ 0.014416] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fdfffff]
- [ 0.014417] On node 0 totalpages: 2036883
- [ 0.014418] DMA zone: 64 pages used for memmap
- [ 0.014419] DMA zone: 156 pages reserved
- [ 0.014420] DMA zone: 3996 pages, LIFO batch:0
- [ 0.014524] DMA32 zone: 12316 pages used for memmap
- [ 0.014525] DMA32 zone: 788215 pages, LIFO batch:63
- [ 0.035658] Normal zone: 19448 pages used for memmap
- [ 0.035660] Normal zone: 1244672 pages, LIFO batch:63
- [ 0.066662] Reserving Intel graphics memory at [mem 0xcba00000-0xcf9fffff]
- [ 0.066797] ACPI: PM-Timer IO Port: 0x408
- [ 0.066798] ACPI: Local APIC address 0xfee00000
- [ 0.066806] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.066806] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.066818] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.066820] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.066821] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.066823] ACPI: IRQ0 used by override.
- [ 0.066824] ACPI: IRQ9 used by override.
- [ 0.066825] Using ACPI (MADT) for SMP configuration information
- [ 0.066827] ACPI: HPET id: 0x8086a301 base: 0xfed00000
- [ 0.066832] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.066848] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.066849] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
- [ 0.066849] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
- [ 0.066850] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.066851] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.066852] PM: Registered nosave memory: [mem 0xc16f7000-0xcae9efff]
- [ 0.066852] PM: Registered nosave memory: [mem 0xcae9f000-0xcaf9efff]
- [ 0.066853] PM: Registered nosave memory: [mem 0xcaf9f000-0xcaffefff]
- [ 0.066854] PM: Registered nosave memory: [mem 0xcafff000-0xcf9fffff]
- [ 0.066854] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
- [ 0.066855] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- [ 0.066855] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
- [ 0.066856] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.066856] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
- [ 0.066857] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
- [ 0.066857] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
- [ 0.066858] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.066858] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- [ 0.066859] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.066859] PM: Registered nosave memory: [mem 0xfee01000-0xffd8ffff]
- [ 0.066860] PM: Registered nosave memory: [mem 0xffd90000-0xffffffff]
- [ 0.066862] [mem 0xcfa00000-0xf7ffffff] available for PCI devices
- [ 0.066863] Booting paravirtualized kernel on bare hardware
- [ 0.066865] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
- [ 0.181866] random: get_random_bytes called from start_kernel+0x95/0x52c with crng_init=0
- [ 0.181875] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
- [ 0.183411] percpu: Embedded 44 pages/cpu s143064 r8192 d28968 u262144
- [ 0.183418] pcpu-alloc: s143064 r8192 d28968 u262144 alloc=1*2097152
- [ 0.183419] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.183443] Built 1 zonelists, mobility grouping on. Total pages: 2004899
- [ 0.183443] Policy zone: Normal
- [ 0.183445] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.45_1 root=UUID=2b87177d-9417-47f1-932f-172bbd37ae87 ro loglevel=4 slub_debug=P page_poison=1
- [ 0.214044] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.214045] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 1.140322] Memory: 7874720K/8147532K available (10252K kernel code, 1166K rwdata, 2324K rodata, 1524K init, 2320K bss, 272812K reserved, 0K cma-reserved)
- [ 1.140537] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 1.140538] Kernel/User page tables isolation: enabled
- [ 1.140582] ftrace: allocating 33289 entries in 131 pages
- [ 1.154062] rcu: Preemptible hierarchical RCU implementation.
- [ 1.154063] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 1.154064] Tasks RCU enabled.
- [ 1.154065] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 1.156680] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
- [ 1.156976] Console: colour dummy device 80x25
- [ 1.156981] console [tty0] enabled
- [ 1.157008] ACPI: Core revision 20180810
- [ 1.157330] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 1.157341] hpet clockevent registered
- [ 1.157346] APIC: Switch to symmetric I/O mode setup
- [ 1.157417] x2apic: IRQ remapping doesn't support X2APIC mode
- [ 1.157935] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 1.162346] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f3863c491, max_idle_ns: 440795215392 ns
- [ 1.162348] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.23 BogoMIPS (lpj=2494119)
- [ 1.162350] pid_max: default: 32768 minimum: 301
- [ 1.162398] Security Framework initialized
- [ 1.162403] Yama: becoming mindful.
- [ 1.162412] AppArmor: AppArmor disabled by boot time parameter
- [ 1.162694] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 1.162836] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 1.162847] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 1.162854] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 1.163202] Disabled fast string operations
- [ 1.163211] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 1.163211] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 1.163215] mce: CPU supports 7 MCE banks
- [ 1.163225] CPU0: Thermal monitoring enabled (TM1)
- [ 1.163233] process: using mwait in idle threads
- [ 1.163236] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- [ 1.163236] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- [ 1.163238] Spectre V2 : Mitigation: Full generic retpoline
- [ 1.163238] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
- [ 1.163239] Spectre V2 : Enabling Restricted Speculation for firmware calls
- [ 1.163240] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
- [ 1.163240] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
- [ 1.163241] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
- [ 1.163242] MDS: Mitigation: Clear CPU buffers
- [ 1.163411] Freeing SMP alternatives memory: 24K
- [ 1.164471] TSC deadline timer enabled
- [ 1.164474] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
- [ 1.170371] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 1.170443] ... version: 3
- [ 1.170445] ... bit width: 48
- [ 1.170446] ... generic registers: 4
- [ 1.170448] ... value mask: 0000ffffffffffff
- [ 1.170450] ... max period: 00007fffffffffff
- [ 1.170451] ... fixed-purpose events: 3
- [ 1.170453] ... event mask: 000000070000000f
- [ 1.172357] rcu: Hierarchical SRCU implementation.
- [ 1.177524] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 1.179361] smp: Bringing up secondary CPUs ...
- [ 1.189411] x86: Booting SMP configuration:
- [ 1.189414] .... node #0, CPUs: #1
- [ 0.001430] Disabled fast string operations
- [ 1.191410] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
- [ 1.201400] #2
- [ 0.001430] Disabled fast string operations
- [ 1.214391] #3
- [ 0.001430] Disabled fast string operations
- [ 1.215395] smp: Brought up 1 node, 4 CPUs
- [ 1.215395] smpboot: Max logical packages: 2
- [ 1.215395] smpboot: Total of 4 processors activated (19952.95 BogoMIPS)
- [ 1.216746] devtmpfs: initialized
- [ 1.216746] x86/mm: Memory block size: 128MB
- [ 1.218921] PM: Registering ACPI NVS region [mem 0xcae9f000-0xcaf9efff] (1048576 bytes)
- [ 1.218921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 1.218921] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 1.219405] pinctrl core: initialized pinctrl subsystem
- [ 1.219758] NET: Registered protocol family 16
- [ 1.220051] audit: initializing netlink subsys (disabled)
- [ 1.220064] audit: type=2000 audit(1558881143.062:1): state=initialized audit_enabled=0 res=1
- [ 1.222353] cpuidle: using governor ladder
- [ 1.222368] cpuidle: using governor menu
- [ 1.222455] ACPI: bus type PCI registered
- [ 1.222457] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 1.222618] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 1.222624] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 1.222624] PCI: Using configuration type 1 for base access
- [ 1.222627] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
- [ 1.224881] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 1.225488] ACPI: Added _OSI(Module Device)
- [ 1.225489] ACPI: Added _OSI(Processor Device)
- [ 1.225490] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 1.225491] ACPI: Added _OSI(Processor Aggregator Device)
- [ 1.225497] ACPI: Added _OSI(Linux-Dell-Video)
- [ 1.225503] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 1.265726] ACPI: 6 ACPI AML tables successfully acquired and loaded
- [ 1.268406] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 1.268696] ACPI: Dynamic OEM Table Load:
- [ 1.268713] ACPI: SSDT 0xFFFF8A96260D4040 0005B9 (v02 FUJ VistSsdt 00000001 INTL 20061109)
- [ 1.376083] ACPI: Dynamic OEM Table Load:
- [ 1.376090] ACPI: SSDT 0xFFFF8A96260D0000 0007A9 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
- [ 1.378023] ACPI: Dynamic OEM Table Load:
- [ 1.378029] ACPI: SSDT 0xFFFF8A962613D4A8 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
- [ 1.378989] ACPI: Dynamic OEM Table Load:
- [ 1.378993] ACPI: SSDT 0xFFFF8A96261476D8 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
- [ 1.382120] ACPI: EC: EC started
- [ 1.382121] ACPI: EC: interrupt blocked
- [ 1.382182] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
- [ 1.382184] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 1.382186] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
- [ 1.382187] ACPI: Interpreter enabled
- [ 1.382234] ACPI: (supports S0 S3 S4 S5)
- [ 1.382235] ACPI: Using IOAPIC for interrupt routing
- [ 1.382306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.383042] ACPI: Enabled 13 GPEs in block 00 to 3F
- [ 1.400907] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 1)
- [ 1.404526] acpi PNP0C15:00: ACPI dock station (docks/bays count: 2)
- [ 1.406802] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 1.406808] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 1.406825] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
- [ 1.408656] PCI host bridge to bus 0000:00
- [ 1.408659] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 1.408661] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 1.408664] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 1.408666] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
- [ 1.408668] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
- [ 1.408670] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 1.408681] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
- [ 1.408843] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
- [ 1.408853] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
- [ 1.408858] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 1.408862] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
- [ 1.409077] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- [ 1.409114] pci 0000:00:16.0: reg 0x10: [mem 0xe2625000-0xe262500f 64bit]
- [ 1.409228] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 1.409400] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
- [ 1.409432] pci 0000:00:19.0: reg 0x10: [mem 0xe2600000-0xe261ffff]
- [ 1.409445] pci 0000:00:19.0: reg 0x14: [mem 0xe262b000-0xe262bfff]
- [ 1.409457] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
- [ 1.409566] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 1.409756] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- [ 1.409788] pci 0000:00:1a.0: reg 0x10: [mem 0xe262a000-0xe262a3ff]
- [ 1.409918] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 1.410101] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- [ 1.410138] pci 0000:00:1b.0: reg 0x10: [mem 0xe2620000-0xe2623fff 64bit]
- [ 1.410272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 1.410452] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- [ 1.410596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 1.410785] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
- [ 1.410927] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 1.411123] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
- [ 1.411264] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 1.411454] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- [ 1.411485] pci 0000:00:1d.0: reg 0x10: [mem 0xe2629000-0xe26293ff]
- [ 1.411616] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 1.411789] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
- [ 1.412103] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
- [ 1.412137] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
- [ 1.412150] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
- [ 1.412163] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
- [ 1.412175] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
- [ 1.412188] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
- [ 1.412201] pci 0000:00:1f.2: reg 0x24: [mem 0xe2628000-0xe26287ff]
- [ 1.412279] pci 0000:00:1f.2: PME# supported from D3hot
- [ 1.412448] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
- [ 1.412479] pci 0000:00:1f.3: reg 0x10: [mem 0xe2624000-0xe26240ff 64bit]
- [ 1.412515] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
- [ 1.412815] acpiphp: Slot [1] registered
- [ 1.412821] pci 0000:00:1c.0: PCI bridge to [bus 01-09]
- [ 1.412825] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 1.412829] pci 0000:00:1c.0: bridge window [mem 0xe0600000-0xe25fffff]
- [ 1.412951] pci 0000:0a:00.0: [168c:002e] type 00 class 0x028000
- [ 1.413007] pci 0000:0a:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
- [ 1.413212] pci 0000:0a:00.0: supports D1
- [ 1.413213] pci 0000:0a:00.0: PME# supported from D0 D1 D3hot
- [ 1.413413] pci 0000:00:1c.2: PCI bridge to [bus 0a]
- [ 1.413420] pci 0000:00:1c.2: bridge window [mem 0xe0500000-0xe05fffff]
- [ 1.413537] pci 0000:0b:00.0: [10ec:5209] type 00 class 0xff0000
- [ 1.413581] pci 0000:0b:00.0: reg 0x10: [mem 0xe0401000-0xe0401fff]
- [ 1.413793] pci 0000:0b:00.0: supports D1 D2
- [ 1.413794] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot
- [ 1.413960] pci 0000:0b:00.1: [10ec:5209] type 00 class 0x080500
- [ 1.414003] pci 0000:0b:00.1: reg 0x10: [mem 0xe0400000-0xe04000ff]
- [ 1.414214] pci 0000:0b:00.1: supports D1 D2
- [ 1.414215] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot
- [ 1.414404] pci 0000:00:1c.7: PCI bridge to [bus 0b]
- [ 1.414412] pci 0000:00:1c.7: bridge window [mem 0xe0400000-0xe04fffff]
- [ 1.418344] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 1.418645] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 1.418941] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
- [ 1.419234] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 1.419530] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 1.419822] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- [ 1.420114] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
- [ 1.420406] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 1.421453] ACPI: EC: interrupt unblocked
- [ 1.421463] ACPI: EC: event unblocked
- [ 1.421472] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 1.421474] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
- [ 1.421580] pci 0000:00:02.0: vgaarb: setting as boot VGA device
- [ 1.421580] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 1.421580] pci 0000:00:02.0: vgaarb: bridge control possible
- [ 1.421580] vgaarb: loaded
- [ 1.421580] pps_core: LinuxPPS API ver. 1 registered
- [ 1.421580] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.421580] PTP clock support registered
- [ 1.421580] EDAC MC: Ver: 3.0.0
- [ 1.421683] PCI: Using ACPI for IRQ routing
- [ 1.425440] PCI: pci_cache_line_size set to 64 bytes
- [ 1.425501] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
- [ 1.425504] e820: reserve RAM buffer [mem 0xc16f7000-0xc3ffffff]
- [ 1.425506] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
- [ 1.426085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 1.426354] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 1.428371] clocksource: Switched to clocksource tsc-early
- [ 1.446849] VFS: Disk quotas dquot_6.6.0
- [ 1.446869] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.446985] pnp: PnP ACPI init
- [ 1.447833] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 1.447838] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 1.447843] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 1.447848] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 1.447853] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
- [ 1.447857] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 1.447862] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 1.447866] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 1.447871] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
- [ 1.447876] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 1.447880] system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
- [ 1.447884] system 00:00: [mem 0xfed08000-0xfed08fff] has been reserved
- [ 1.447890] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.448685] system 00:01: [io 0x0400-0x047f] has been reserved
- [ 1.448689] system 00:01: [io 0x0480-0x048f] has been reserved
- [ 1.448694] system 00:01: [io 0x04d0-0x04d1] has been reserved
- [ 1.448698] system 00:01: [io 0x0500-0x057f] has been reserved
- [ 1.448702] system 00:01: [io 0x1640-0x164f] has been reserved
- [ 1.448706] system 00:01: [io 0xf800-0xf87f] has been reserved
- [ 1.448710] system 00:01: [io 0xf880-0xf8ff] has been reserved
- [ 1.448713] system 00:01: [io 0xfc00-0xfc7f] has been reserved
- [ 1.448717] system 00:01: [io 0xfc80-0xfcff] has been reserved
- [ 1.448721] system 00:01: [io 0xfd00-0xfd7f] has been reserved
- [ 1.448725] system 00:01: [io 0x1000-0x1003] has been reserved
- [ 1.448729] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.448987] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 1.449136] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
- [ 1.449337] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 1.449759] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
- [ 1.449764] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
- [ 1.450873] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 1.452646] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 1.453455] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 1.454738] pnp: PnP ACPI: found 9 devices
- [ 1.462212] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
- [ 1.462232] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-09] add_size 200000 add_align 100000
- [ 1.462263] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfa00000-0xcfbfffff 64bit pref]
- [ 1.462265] pci 0000:00:1c.0: PCI bridge to [bus 01-09]
- [ 1.462268] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 1.462274] pci 0000:00:1c.0: bridge window [mem 0xe0600000-0xe25fffff]
- [ 1.462279] pci 0000:00:1c.0: bridge window [mem 0xcfa00000-0xcfbfffff 64bit pref]
- [ 1.462287] pci 0000:00:1c.2: PCI bridge to [bus 0a]
- [ 1.462293] pci 0000:00:1c.2: bridge window [mem 0xe0500000-0xe05fffff]
- [ 1.462304] pci 0000:00:1c.7: PCI bridge to [bus 0b]
- [ 1.462310] pci 0000:00:1c.7: bridge window [mem 0xe0400000-0xe04fffff]
- [ 1.462322] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- [ 1.462323] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- [ 1.462324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
- [ 1.462325] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
- [ 1.462326] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
- [ 1.462327] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
- [ 1.462328] pci_bus 0000:01: resource 1 [mem 0xe0600000-0xe25fffff]
- [ 1.462329] pci_bus 0000:01: resource 2 [mem 0xcfa00000-0xcfbfffff 64bit pref]
- [ 1.462330] pci_bus 0000:0a: resource 1 [mem 0xe0500000-0xe05fffff]
- [ 1.462332] pci_bus 0000:0b: resource 1 [mem 0xe0400000-0xe04fffff]
- [ 1.462781] NET: Registered protocol family 2
- [ 1.463012] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
- [ 1.463049] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 1.463177] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 1.463295] TCP: Hash tables configured (established 65536 bind 65536)
- [ 1.463361] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 1.463390] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 1.463494] NET: Registered protocol family 1
- [ 1.463510] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 1.464317] PCI: CLS 64 bytes, default 64
- [ 1.464396] Unpacking initramfs...
- [ 2.032776] Freeing initrd memory: 50976K
- [ 2.032779] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 2.032780] software IO TLB: mapped [mem 0xbd6f7000-0xc16f7000] (64MB)
- [ 2.033068] Scanning for low memory corruption every 60 seconds
- [ 2.034249] Initialise system trusted keyrings
- [ 2.034324] workingset: timestamp_bits=40 max_order=21 bucket_order=0
- [ 2.038043] zbud: loaded
- [ 2.039389] Key type asymmetric registered
- [ 2.039390] Asymmetric key parser 'x509' registered
- [ 2.039408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 2.039444] io scheduler noop registered
- [ 2.039445] io scheduler deadline registered
- [ 2.039528] io scheduler cfq registered (default)
- [ 2.039528] io scheduler mq-deadline registered
- [ 2.039529] io scheduler kyber registered
- [ 2.040746] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 2.040746] vesafb: scrolling: redraw
- [ 2.040748] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 2.040757] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override.
- [ 2.040765] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
- [ 2.040835] fbcon: Deferring console take-over
- [ 2.040836] fb0: VESA VGA frame buffer device
- [ 2.040856] intel_idle: MWAIT substates: 0x21120
- [ 2.040857] intel_idle: v0.4.1 model 0x2A
- [ 2.041278] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 2.041690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 2.062836] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 2.064395] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 2.064415] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 2.064415] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 2.064441] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 2.064441] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 2.064465] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 2.064465] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 2.064725] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 2.184840] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
- [ 2.309951] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b0:99:28:cd:a9:64
- [ 2.309966] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 2.310015] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
- [ 2.310117] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.313125] i8042: Detected active multiplexing controller, rev 1.1
- [ 2.314585] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.314649] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 2.314702] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 2.314753] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 2.314804] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 2.315095] mousedev: PS/2 mouse device common for all mice
- [ 2.315205] rtc_cmos 00:04: RTC can wake from S4
- [ 2.315523] rtc_cmos 00:04: registered as rtc0
- [ 2.315561] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 2.315578] intel_pstate: Intel P-state driver initializing
- [ 2.316184] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.317879] NET: Registered protocol family 10
- [ 2.332952] Segment Routing with IPv6
- [ 2.333023] NET: Registered protocol family 17
- [ 2.333201] Key type dns_resolver registered
- [ 2.334676] microcode: sig=0x206a7, pf=0x10, revision=0x2f
- [ 2.335103] microcode: Microcode Update Driver: v2.2.
- [ 2.335139] sched_clock: Marking stable (2334642499, 430070)->(2343050928, -7978359)
- [ 2.335635] registered taskstats version 1
- [ 2.335637] Loading compiled-in X.509 certificates
- [ 2.335778] zswap: loaded using pool lzo/zbud
- [ 2.338554] rtc_cmos 00:04: setting system clock to 2019-05-26 14:32:24 UTC (1558881144)
- [ 2.346151] Freeing unused kernel image memory: 1524K
- [ 2.346214] Write protecting the kernel read-only data: 16384k
- [ 2.346461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 2.348129] Freeing unused kernel image memory: 2028K
- [ 2.348815] Freeing unused kernel image memory: 1772K
- [ 2.349197] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 2.349198] x86/mm: Checking user space page tables
- [ 2.349235] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 2.349238] Run /init as init process
- [ 2.440845] dracut: dracut-048
- [ 2.657064] device-mapper: uevent: version 1.0.3
- [ 2.657235] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
- [ 2.676158] systemd-udevd[281]: starting version 3.2.8
- [ 2.676568] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.676612] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.676632] random: systemd-udevd: uninitialized urandom read (16 bytes read)
- [ 2.679273] udevd[282]: starting eudev-3.2.8
- [ 2.766650] dracut: rd.md=0: removing MD RAID activation
- [ 2.849118] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
- [ 2.849141] ACPI: Lid Switch [LID]
- [ 2.849241] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
- [ 2.849257] ACPI: Power Button [PWRB]
- [ 2.849355] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
- [ 2.849372] ACPI: Sleep Button [SLPB]
- [ 2.849475] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
- [ 2.849489] ACPI: Power Button [PWRF]
- [ 2.851718] Linux agpgart interface v0.103
- [ 2.855874] e1000e 0000:00:19.0 enp0s25: renamed from eth0
- [ 2.859821] ACPI: bus type USB registered
- [ 2.861928] usbcore: registered new interface driver usbfs
- [ 2.861983] usbcore: registered new interface driver hub
- [ 2.862213] usbcore: registered new device driver usb
- [ 2.865217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.867877] ehci-pci: EHCI PCI platform driver
- [ 2.868219] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 2.868233] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 2.868254] ehci-pci 0000:00:1a.0: debug port 2
- [ 2.869533] SCSI subsystem initialized
- [ 2.872957] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 2.872986] ehci-pci 0000:00:1a.0: irq 23, io mem 0xe262a000
- [ 2.875531] sdhci: Secure Digital Host Controller Interface driver
- [ 2.875532] sdhci: Copyright(c) Pierre Ossman
- [ 2.877337] cryptd: max_cpu_qlen set to 1000
- [ 2.878613] libata version 3.00 loaded.
- [ 2.879418] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 2.879949] hub 1-0:1.0: USB hub found
- [ 2.879979] hub 1-0:1.0: 3 ports detected
- [ 2.881279] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 2.881293] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 2.881315] ehci-pci 0000:00:1d.0: debug port 2
- [ 2.881572] ahci 0000:00:1f.2: version 3.0
- [ 2.881918] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
- [ 2.883303] AVX version of gcm_enc/dec engaged.
- [ 2.883305] AES CTR mode by8 optimization enabled
- [ 2.885316] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 2.885383] ehci-pci 0000:00:1d.0: irq 22, io mem 0xe2629000
- [ 2.886565] sdhci-pci 0000:0b:00.1: SDHCI controller found [10ec:5209] (rev 1)
- [ 2.886754] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 2.886779] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
- [ 2.886783] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 2.890383] mmc0: SDHCI controller on PCI [0000:0b:00.1] using DMA
- [ 2.890396] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 2.892197] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
- [ 2.892201] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
- [ 2.892366] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 2.893398] hub 2-0:1.0: USB hub found
- [ 2.893426] hub 2-0:1.0: 3 ports detected
- [ 2.903497] kvmgt: Unknown symbol gfn_to_memslot (err -2)
- [ 2.903513] kvmgt: Unknown symbol vfio_pin_pages (err -2)
- [ 2.903524] kvmgt: Unknown symbol vfio_info_cap_shift (err -2)
- [ 2.903533] kvmgt: Unknown symbol vfio_set_irqs_validate_and_prepare (err -2)
- [ 2.903543] kvmgt: Unknown symbol vfio_device_put (err -2)
- [ 2.903550] kvmgt: Unknown symbol gfn_to_pfn (err -2)
- [ 2.903559] kvmgt: Unknown symbol mdev_from_dev (err -2)
- [ 2.903572] kvmgt: Unknown symbol kvm_put_kvm (err -2)
- [ 2.903583] kvmgt: Unknown symbol kvm_write_guest (err -2)
- [ 2.903593] kvmgt: Unknown symbol kvm_slot_page_track_remove_page (err -2)
- [ 2.903604] kvmgt: Unknown symbol kvm_page_track_register_notifier (err -2)
- [ 2.903615] kvmgt: Unknown symbol mdev_parent_dev (err -2)
- [ 2.903624] kvmgt: Unknown symbol vfio_unpin_pages (err -2)
- [ 2.903638] kvmgt: Unknown symbol kvm_is_visible_gfn (err -2)
- [ 2.903644] kvmgt: Unknown symbol kvm_page_track_unregister_notifier (err -2)
- [ 2.903655] kvmgt: Unknown symbol vfio_device_get_from_dev (err -2)
- [ 2.903663] kvmgt: Unknown symbol kvm_slot_page_track_add_page (err -2)
- [ 2.903676] kvmgt: Unknown symbol vfio_register_notifier (err -2)
- [ 2.903683] kvmgt: Unknown symbol vfio_info_add_capability (err -2)
- [ 2.903690] kvmgt: Unknown symbol mdev_get_drvdata (err -2)
- [ 2.903699] kvmgt: Unknown symbol mdev_register_device (err -2)
- [ 2.903709] kvmgt: Unknown symbol mdev_dev (err -2)
- [ 2.903889] kvmgt: Unknown symbol mdev_unregister_device (err -2)
- [ 2.903900] kvmgt: Unknown symbol vfio_unregister_notifier (err -2)
- [ 2.903907] kvmgt: Unknown symbol kvm_read_guest (err -2)
- [ 2.903915] kvmgt: Unknown symbol mdev_set_drvdata (err -2)
- [ 2.903926] kvmgt: Unknown symbol kvm_get_kvm (err -2)
- [ 2.903957] scsi host0: ahci
- [ 2.904250] scsi host1: ahci
- [ 2.904486] scsi host2: ahci
- [ 2.904682] scsi host3: ahci
- [ 2.904855] scsi host4: ahci
- [ 2.905027] scsi host5: ahci
- [ 2.905130] ata1: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628100 irq 26
- [ 2.905132] ata2: DUMMY
- [ 2.905134] ata3: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628200 irq 26
- [ 2.905135] ata4: DUMMY
- [ 2.905137] ata5: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628300 irq 26
- [ 2.905139] ata6: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628380 irq 26
- [ 2.961229] checking generic (d0000000 300000) vs hw (d0000000 10000000)
- [ 2.961230] fb: switching to inteldrmfb from VESA VGA
- [ 2.961287] [drm] Replacing VGA console driver
- [ 2.963911] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.963913] [drm] Driver supports precise vblank timestamp query.
- [ 2.966006] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 3.045357] tsc: Refined TSC clocksource calibration: 2494.333 MHz
- [ 3.045363] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
- [ 3.045373] clocksource: Switched to clocksource tsc
- [ 3.093794] random: fast init done
- [ 3.199354] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 3.210423] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 3.210824] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 3.211035] ata1.00: ATA-9: ST1000LX001-1EM164, SD02, max UDMA/133
- [ 3.211037] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
- [ 3.211424] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 3.211618] ata1.00: configured for UDMA/133
- [ 3.211809] scsi 0:0:0:0: Direct-Access ATA ST1000LX001-1EM1 SD02 PQ: 0 ANSI: 5
- [ 3.215354] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 3.227597] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
- [ 3.229878] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 3.232518] acpi device:03: registered as cooling_device4
- [ 3.232632] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
- [ 3.248659] fbcon: inteldrmfb (fb0) is primary device
- [ 3.248660] fbcon: Deferring console take-over
- [ 3.248662] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 3.330576] hub 1-1:1.0: USB hub found
- [ 3.331286] hub 1-1:1.0: 6 ports detected
- [ 3.350422] hub 2-1:1.0: USB hub found
- [ 3.350624] hub 2-1:1.0: 6 ports detected
- [ 3.524299] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.527249] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 3.527260] ata3.00: ATAPI: MATSHITABD-MLT UJ240AS, 1.10, max UDMA/100
- [ 3.530657] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 3.530672] ata3.00: configured for UDMA/100
- [ 3.533927] scsi 2:0:0:0: CD-ROM MATSHITA BD-MLT UJ240AS 1.10 PQ: 0 ANSI: 5
- [ 3.629479] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
- [ 3.709690] hub 2-1.3:1.0: USB hub found
- [ 3.709978] hub 2-1.3:1.0: 4 ports detected
- [ 3.775482] usb 2-1.4: new full-speed USB device number 4 using ehci-pci
- [ 3.860063] ata5: SATA link down (SStatus 0 SControl 300)
- [ 3.981483] usb 2-1.3.2: new full-speed USB device number 5 using ehci-pci
- [ 4.172206] ata6: SATA link down (SStatus 0 SControl 300)
- [ 4.183849] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 4.183852] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 4.183871] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.183873] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.183907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.185755] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
- [ 4.186286] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.204864] sr 2:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 4.204871] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 4.205244] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 5.904146] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.039505] dracut: Checking ext4: /dev/disk/by-uuid/2b87177d-9417-47f1-932f-172bbd37ae87
- [ 6.039727] dracut: issuing e2fsck -a /dev/disk/by-uuid/2b87177d-9417-47f1-932f-172bbd37ae87
- [ 6.056570] dracut: /dev/disk/by-uuid/2b87177d-9417-47f1-932f-172bbd37ae87: clean, 412437/13107200 files, 7599335/52428800 blocks
- [ 6.060241] dracut: Mounting /dev/disk/by-uuid/2b87177d-9417-47f1-932f-172bbd37ae87 with -o defaults,ro
- [ 6.087946] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
- [ 6.198949] dracut: Mounted root filesystem /dev/sda6
- [ 6.332581] dracut: Switching root
- [ 6.364700] fbcon: Taking over console
- [ 6.371427] Console: switching to colour frame buffer device 200x56
- [ 6.733428] random: crng init done
- [ 6.733432] random: 7 urandom warning(s) missed due to ratelimiting
- [ 6.807231] fuse init (API version 7.27)
- [ 6.856351] raid6: sse2x1 gen() 6832 MB/s
- [ 6.873354] raid6: sse2x1 xor() 6736 MB/s
- [ 6.890364] raid6: sse2x2 gen() 11332 MB/s
- [ 6.907364] raid6: sse2x2 xor() 7648 MB/s
- [ 6.924360] raid6: sse2x4 gen() 6628 MB/s
- [ 6.941353] raid6: sse2x4 xor() 7933 MB/s
- [ 6.941354] raid6: using algorithm sse2x2 gen() 11332 MB/s
- [ 6.941354] raid6: .... xor() 7648 MB/s, rmw enabled
- [ 6.941355] raid6: using ssse3x2 recovery algorithm
- [ 6.942685] xor: automatically using best checksumming function avx
- [ 6.977181] Btrfs loaded, crc32c=crc32c-intel
- [ 6.994204] loop: module loaded
- [ 7.001462] tun: Universal TUN/TAP device driver, 1.6
- [ 7.017628] PPP generic driver version 2.4.2
- [ 7.051412] VFIO - User Level meta-driver version: 0.3
- [ 7.098902] Bluetooth: Core ver 2.22
- [ 7.098926] NET: Registered protocol family 31
- [ 7.098927] Bluetooth: HCI device and connection manager initialized
- [ 7.098931] Bluetooth: HCI socket layer initialized
- [ 7.098933] Bluetooth: L2CAP socket layer initialized
- [ 7.098945] Bluetooth: SCO socket layer initialized
- [ 7.114372] hidraw: raw HID events driver (C) Jiri Kosina
- [ 7.130597] NET: Registered protocol family 40
- [ 7.241144] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 7.241261] sr 2:0:0:0: Attached scsi generic sg1 type 5
- [ 7.271171] udevd[645]: starting version 3.2.8
- [ 7.314200] udevd[645]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/40-libsane.rules'
- [ 7.371877] udevd[645]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules'
- [ 7.374207] udevd[646]: starting eudev-3.2.8
- [ 7.443381] ACPI: AC Adapter [AC] (on-line)
- [ 7.460894] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
- [ 7.477218] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT]
- [ 7.478860] ACPI: \_SB_.FEXT: BTNI: [0x10f0101]
- [ 7.478947] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input10
- [ 7.480167] parport_pc 00:07: reported by Plug and Play ACPI
- [ 7.480241] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
- [ 7.481716] fujitsu_laptop: driver 0.6.0 successfully loaded
- [ 7.502694] battery: ACPI: Battery Slot [CMB1] (battery present)
- [ 7.502838] battery: ACPI: Battery Slot [CMB2] (battery absent)
- [ 7.521557] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
- [ 7.537935] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPCB.PMIO) (20180810/utaddress-213)
- [ 7.537941] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 7.537946] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000054B (\_SB.PCI0.LPCB.OGIO) (20180810/utaddress-213)
- [ 7.537950] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 7.537952] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000054B (\_SB.PCI0.LPCB.OGIO) (20180810/utaddress-213)
- [ 7.537956] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 7.537958] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000054B (\_SB.PCI0.LPCB.OGIO) (20180810/utaddress-213)
- [ 7.537962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 7.537962] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 7.590990] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 7.594034] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 7.600327] input: PC Speaker as /devices/platform/pcspkr/input/input11
- [ 7.602229] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
- [ 7.602230] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
- [ 7.602231] RAPL PMU: hw unit of domain package 2^-16 Joules
- [ 7.602232] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
- [ 7.664762] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 7.664768] cfg80211: failed to load regulatory.db
- [ 7.866342] ppdev: user-space parallel port driver
- [ 7.883340] iTCO_vendor_support: vendor-support=0
- [ 7.895263] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 7.895339] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
- [ 7.895526] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 7.902348] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_exit [i915])
- [ 7.989658] intel_rapl: Found RAPL domain package
- [ 7.989660] intel_rapl: Found RAPL domain core
- [ 7.989661] intel_rapl: Found RAPL domain uncore
- [ 7.989667] intel_rapl: RAPL package 0 domain package locked by BIOS
- [ 7.990109] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x909701f0
- [ 7.991324] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- [ 7.991326] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 7.991328] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x1a/0x21/0x0/0x0/0x0)
- [ 7.991329] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 7.991330] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 7.991332] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x1b
- [ 7.991334] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
- [ 8.064066] ath: EEPROM regdomain: 0x6a
- [ 8.064067] ath: EEPROM indicates we should expect a direct regpair map
- [ 8.064068] ath: Country alpha2 being used: 00
- [ 8.064068] ath: Regpair used: 0x6a
- [ 8.074753] usbcore: registered new interface driver btusb
- [ 8.076017] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 8.076487] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffff9d0ec13e0000, irq=18
- [ 8.079594] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
- [ 8.080036] ath9k 0000:0a:00.0 wlp10s0: renamed from wlan0
- [ 8.080707] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
- [ 8.081146] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
- [ 8.081301] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
- [ 8.081437] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
- [ 8.081558] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
- [ 8.081677] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
- [ 8.191428] Bluetooth: hci0: BCM: chip id 20
- [ 8.192497] Bluetooth: hci0: BCM: features 0x07
- [ 8.209422] Bluetooth: hci0: BCM20702A
- [ 8.210561] Bluetooth: hci0: BCM20702A0 (001.001.024) build 0000
- [ 8.230404] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e031.hcd failed with error -2
- [ 8.230410] Bluetooth: hci0: BCM: Patch brcm/BCM20702A0-0489-e031.hcd not found
- [ 8.303303] EXT4-fs (sda6): re-mounted. Opts: (null)
- [ 8.408756] psmouse serio4: synaptics: queried max coordinates: x [..5498], y [..4560]
- [ 8.475897] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb42000/0xa0000/0x0, board id: 0, fw id: 504816
- [ 8.475921] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
- [ 8.517861] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input15
- [ 8.718096] EXT4-fs (sda6): re-mounted. Opts: (null)
- [ 8.734268] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.775002] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.798379] Adding 16777212k swap on /dev/sda5. Priority:-2 extents:1 across:16777212k FS
- [ 9.015366] udevd[781]: starting version 3.2.8
- [ 9.016615] udevd[781]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/40-libsane.rules'
- [ 9.025503] udevd[781]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules'
- [ 9.025825] udevd[781]: starting eudev-3.2.8
- [ 9.418389] 8021q: 802.1Q VLAN Support v1.8
- [ 9.836135] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 9.836137] Bluetooth: BNEP filters: protocol multicast
- [ 9.836141] Bluetooth: BNEP socket layer initialized
- [ 9.899569] IPv6: ADDRCONF(NETDEV_UP): wlp10s0: link is not ready
- [ 10.181941] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
- [ 11.076978] wlp10s0: authenticate with e8:df:70:4b:46:de
- [ 11.102027] wlp10s0: send auth to e8:df:70:4b:46:de (try 1/3)
- [ 11.107391] wlp10s0: authenticated
- [ 11.109368] wlp10s0: associate with e8:df:70:4b:46:de (try 1/3)
- [ 11.116062] wlp10s0: RX AssocResp from e8:df:70:4b:46:de (capab=0x1431 status=0 aid=3)
- [ 11.116298] wlp10s0: associated
- [ 11.176042] IPv6: ADDRCONF(NETDEV_CHANGE): wlp10s0: link becomes ready
- [ 11.216118] wlp10s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:4b:46:de
- [ 70.777750] wlp10s0: deauthenticating from e8:df:70:4b:46:de by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 71.648293] PM: suspend entry (deep)
- [ 71.648295] PM: Syncing filesystems ... done.
- [ 71.669140] Freezing user space processes ... (elapsed 0.029 seconds) done.
- [ 71.699048] OOM killer disabled.
- [ 71.699050] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 71.700536] Suspending console(s) (use no_console_suspend to debug)
- [ 71.711472] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 71.712711] sd 0:0:0:0: [sda] Stopping disk
- [ 71.824059] parport_pc 00:07: disabled
- [ 71.824921] serial 00:06: disabled
- [ 71.825490] e1000e: EEE TX LPI TIMER: 00000011
- [ 72.374741] ACPI: EC: interrupt blocked
- [ 72.387908] ACPI: Preparing to enter system sleep state S3
- [ 73.636764] ACPI: button: The lid device is not compliant to SW_LID.
- [ 73.636799] ACPI: EC: event blocked
- [ 73.636800] ACPI: EC: EC stopped
- [ 73.636802] PM: Saving platform NVS memory
- [ 73.636825] Disabling non-boot CPUs ...
- [ 73.648813] smpboot: CPU 1 is now offline
- [ 73.668037] smpboot: CPU 2 is now offline
- [ 73.674888] smpboot: CPU 3 is now offline
- [ 73.676603] ACPI: Low-level resume complete
- [ 73.676660] ACPI: EC: EC started
- [ 73.676660] PM: Restoring platform NVS memory
- [ 73.677889] Enabling non-boot CPUs ...
- [ 73.677959] x86: Booting SMP configuration:
- [ 73.677960] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 73.678257] Disabled fast string operations
- [ 73.680453] cache: parent cpu1 should not be sleeping
- [ 73.680937] CPU1 is up
- [ 73.681032] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 73.681863] Disabled fast string operations
- [ 73.684045] cache: parent cpu2 should not be sleeping
- [ 73.684616] CPU2 is up
- [ 73.684707] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 73.685427] Disabled fast string operations
- [ 73.687605] cache: parent cpu3 should not be sleeping
- [ 73.688303] CPU3 is up
- [ 73.691724] ACPI: Waking up from system sleep state S3
- [ 73.697332] ACPI: EC: interrupt unblocked
- [ 73.710766] ACPI: EC: event unblocked
- [ 73.711791] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 73.711806] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 73.715709] serial 00:06: activated
- [ 73.718331] parport_pc 00:07: activated
- [ 73.721576] sd 0:0:0:0: [sda] Starting disk
- [ 73.934223] usb 2-1.4: reset full-speed USB device number 4 using ehci-pci
- [ 74.076237] usb 2-1.3: reset full-speed USB device number 3 using ehci-pci
- [ 74.340689] ata5: SATA link down (SStatus 0 SControl 300)
- [ 74.340742] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 74.340788] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 74.341616] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 74.342948] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 74.343640] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 74.344018] ata1.00: configured for UDMA/133
- [ 74.347568] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 74.347582] ata3.00: configured for UDMA/100
- [ 74.348786] ata6: SATA link down (SStatus 0 SControl 300)
- [ 74.430225] usb 2-1.3.2: reset full-speed USB device number 5 using ehci-pci
- [ 74.639165] psmouse serio4: synaptics: queried max coordinates: x [..5498], y [..4560]
- [ 78.397185] OOM killer enabled.
- [ 78.397187] Restarting tasks ... done.
- [ 78.399856] video LNXVIDEO:00: Restoring backlight state
- [ 78.421231] IPv6: ADDRCONF(NETDEV_UP): wlp10s0: link is not ready
- [ 78.573785] pci_bus 0000:01: Allocating resources
- [ 78.573820] pci_bus 0000:0a: Allocating resources
- [ 78.573852] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 0a] add_size 1000
- [ 78.573860] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0a] add_size 200000 add_align 100000
- [ 78.573875] pci_bus 0000:0b: Allocating resources
- [ 78.573907] pcieport 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
- [ 78.573912] pcieport 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
- [ 78.573944] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
- [ 78.573954] pcieport 0000:00:1c.7: BAR 15: assigned [mem 0xcfe00000-0xcfffffff 64bit pref]
- [ 78.573963] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
- [ 78.573968] pcieport 0000:00:1c.7: BAR 13: assigned [io 0x5000-0x5fff]
- [ 78.732469] PM: suspend exit
- [ 79.200968] Bluetooth: hci0: BCM: chip id 20
- [ 79.201954] Bluetooth: hci0: BCM: features 0x07
- [ 79.219036] Bluetooth: hci0: BCM20702A
- [ 79.219954] Bluetooth: hci0: BCM20702A0 (001.001.024) build 0000
- [ 79.220183] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e031.hcd failed with error -2
- [ 79.220193] Bluetooth: hci0: BCM: Patch brcm/BCM20702A0-0489-e031.hcd not found
- [ 79.325426] wlp10s0: authenticate with e8:df:70:4b:46:de
- [ 79.342500] wlp10s0: send auth to e8:df:70:4b:46:de (try 1/3)
- [ 79.347611] wlp10s0: authenticated
- [ 79.348057] wlp10s0: associate with e8:df:70:4b:46:de (try 1/3)
- [ 79.355245] wlp10s0: RX AssocResp from e8:df:70:4b:46:de (capab=0x1431 status=0 aid=3)
- [ 79.355629] wlp10s0: associated
- [ 79.375129] wlp10s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:4b:46:de
- [ 79.383067] IPv6: ADDRCONF(NETDEV_CHANGE): wlp10s0: link becomes ready
- [ 128.269583] PM: suspend entry (deep)
- [ 128.269585] PM: Syncing filesystems ... done.
- [ 128.458572] Freezing user space processes ... (elapsed 0.001 seconds) done.
- [ 128.460249] OOM killer disabled.
- [ 128.460250] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
- [ 128.461304] Suspending console(s) (use no_console_suspend to debug)
- [ 128.461936] wlp10s0: deauthenticating from e8:df:70:4b:46:de by local choice (Reason: 3=DEAUTH_LEAVING)
- [ 128.465210] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 128.466515] sd 0:0:0:0: [sda] Stopping disk
- [ 128.581647] parport_pc 00:07: disabled
- [ 128.582500] serial 00:06: disabled
- [ 128.582908] e1000e: EEE TX LPI TIMER: 00000011
- [ 129.123405] ACPI: EC: interrupt blocked
- [ 129.135982] ACPI: Preparing to enter system sleep state S3
- [ 130.277604] ACPI: EC: event blocked
- [ 130.277606] ACPI: EC: EC stopped
- [ 130.277608] PM: Saving platform NVS memory
- [ 130.277630] Disabling non-boot CPUs ...
- [ 130.289596] smpboot: CPU 1 is now offline
- [ 130.300853] smpboot: CPU 2 is now offline
- [ 130.307723] smpboot: CPU 3 is now offline
- [ 130.309472] ACPI: Low-level resume complete
- [ 130.309528] ACPI: EC: EC started
- [ 130.309528] PM: Restoring platform NVS memory
- [ 130.312282] Enabling non-boot CPUs ...
- [ 130.312408] x86: Booting SMP configuration:
- [ 130.312411] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 130.313199] Disabled fast string operations
- [ 130.315440] cache: parent cpu1 should not be sleeping
- [ 130.315977] CPU1 is up
- [ 130.316062] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 130.317340] Disabled fast string operations
- [ 130.319538] cache: parent cpu2 should not be sleeping
- [ 130.320123] CPU2 is up
- [ 130.320240] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 130.320962] Disabled fast string operations
- [ 130.323153] cache: parent cpu3 should not be sleeping
- [ 130.323735] CPU3 is up
- [ 130.327159] ACPI: Waking up from system sleep state S3
- [ 130.333220] ACPI: EC: interrupt unblocked
- [ 130.346334] ACPI: EC: event unblocked
- [ 130.347156] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 130.347166] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 130.348529] sd 0:0:0:0: [sda] Starting disk
- [ 130.349722] serial 00:06: activated
- [ 130.353873] parport_pc 00:07: activated
- [ 130.567026] usb 2-1.3: reset full-speed USB device number 3 using ehci-pci
- [ 130.709051] usb 2-1.4: reset full-speed USB device number 4 using ehci-pci
- [ 130.919001] usb 2-1.3.2: reset full-speed USB device number 5 using ehci-pci
- [ 130.965405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 130.965452] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 130.965492] ata5: SATA link down (SStatus 0 SControl 300)
- [ 130.965535] ata6: SATA link down (SStatus 0 SControl 300)
- [ 130.966277] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 130.968232] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 130.968260] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 130.968466] ata1.00: configured for UDMA/133
- [ 130.972423] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 130.972437] ata3.00: configured for UDMA/100
- [ 131.268664] psmouse serio4: synaptics: queried max coordinates: x [..5498], y [..4560]
- [ 135.050871] OOM killer enabled.
- [ 135.050872] Restarting tasks ... done.
- [ 135.057329] video LNXVIDEO:00: Restoring backlight state
- [ 135.064294] pci_bus 0000:01: Allocating resources
- [ 135.064316] pci_bus 0000:0a: Allocating resources
- [ 135.064341] pci_bus 0000:0b: Allocating resources
- [ 135.408084] PM: suspend exit
- [ 135.769415] Bluetooth: hci0: BCM: chip id 20
- [ 135.770389] Bluetooth: hci0: BCM: features 0x07
- [ 135.787412] Bluetooth: hci0: BCM20702A
- [ 135.788410] Bluetooth: hci0: BCM20702A0 (001.001.024) build 0000
- [ 135.788482] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e031.hcd failed with error -2
- [ 135.788489] Bluetooth: hci0: BCM: Patch brcm/BCM20702A0-0489-e031.hcd not found
- [ 697.024475] PM: suspend entry (deep)
- [ 697.024478] PM: Syncing filesystems ...
- [ 699.050462] pci_bus 0000:01: Allocating resources
- [ 699.050484] pci_bus 0000:0a: Allocating resources
- [ 699.050508] pci_bus 0000:0b: Allocating resources
- [ 701.383927] done.
- [ 701.384371] Freezing user space processes ... (elapsed 0.002 seconds) done.
- [ 701.386877] OOM killer disabled.
- [ 701.386878] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
- [ 701.388186] Suspending console(s) (use no_console_suspend to debug)
- [ 701.393176] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 701.418420] sd 0:0:0:0: [sda] Stopping disk
- [ 701.510887] parport_pc 00:07: disabled
- [ 701.511957] serial 00:06: disabled
- [ 701.512422] e1000e: EEE TX LPI TIMER: 00000011
- [ 702.059509] ACPI: EC: interrupt blocked
- [ 702.072701] ACPI: Preparing to enter system sleep state S3
- [ 702.075584] ACPI: EC: event blocked
- [ 702.075586] ACPI: EC: EC stopped
- [ 702.075587] PM: Saving platform NVS memory
- [ 702.075606] Disabling non-boot CPUs ...
- [ 702.087308] smpboot: CPU 1 is now offline
- [ 702.099465] smpboot: CPU 2 is now offline
- [ 702.105649] smpboot: CPU 3 is now offline
- [ 702.107334] ACPI: Low-level resume complete
- [ 702.107402] ACPI: EC: EC started
- [ 702.107402] PM: Restoring platform NVS memory
- [ 702.108702] Enabling non-boot CPUs ...
- [ 702.108781] x86: Booting SMP configuration:
- [ 702.108782] smpboot: Booting Node 0 Processor 1 APIC 0x1
- [ 702.109068] Disabled fast string operations
- [ 702.111268] cache: parent cpu1 should not be sleeping
- [ 702.111960] CPU1 is up
- [ 702.112050] smpboot: Booting Node 0 Processor 2 APIC 0x2
- [ 702.113343] Disabled fast string operations
- [ 702.115528] cache: parent cpu2 should not be sleeping
- [ 702.116246] CPU2 is up
- [ 702.116333] smpboot: Booting Node 0 Processor 3 APIC 0x3
- [ 702.117056] Disabled fast string operations
- [ 702.119229] cache: parent cpu3 should not be sleeping
- [ 702.119943] CPU3 is up
- [ 702.123364] ACPI: Waking up from system sleep state S3
- [ 702.129404] ACPI: EC: interrupt unblocked
- [ 702.142607] ACPI: EC: event unblocked
- [ 702.143081] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 702.143093] sdhci-pci 0000:0b:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 702.146588] serial 00:06: activated
- [ 702.151259] parport_pc 00:07: activated
- [ 702.153029] sd 0:0:0:0: [sda] Starting disk
- [ 702.367034] usb 2-1.3: reset full-speed USB device number 3 using ehci-pci
- [ 702.509005] usb 2-1.4: reset full-speed USB device number 4 using ehci-pci
- [ 702.719026] usb 2-1.3.2: reset full-speed USB device number 5 using ehci-pci
- [ 702.765527] ata5: SATA link down (SStatus 0 SControl 300)
- [ 702.765582] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 702.765628] ata6: SATA link down (SStatus 0 SControl 300)
- [ 702.766469] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 702.767677] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
- [ 702.767905] ata1.00: configured for UDMA/133
- [ 702.773488] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 702.775874] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 702.780620] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 702.780636] ata3.00: configured for UDMA/100
- [ 703.059068] psmouse serio4: synaptics: queried max coordinates: x [..5498], y [..4560]
- [ 706.671901] OOM killer enabled.
- [ 706.671903] Restarting tasks ... done.
- [ 706.673414] video LNXVIDEO:00: Restoring backlight state
- [ 706.697016] IPv6: ADDRCONF(NETDEV_UP): wlp10s0: link is not ready
- [ 707.008856] PM: suspend exit
- [ 707.360577] Bluetooth: hci0: BCM: chip id 20
- [ 707.361724] Bluetooth: hci0: BCM: features 0x07
- [ 707.378558] Bluetooth: hci0: BCM20702A
- [ 707.379557] Bluetooth: hci0: BCM20702A0 (001.001.024) build 0000
- [ 707.379643] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e031.hcd failed with error -2
- [ 707.379652] Bluetooth: hci0: BCM: Patch brcm/BCM20702A0-0489-e031.hcd not found
- [ 707.606366] wlp10s0: authenticate with e8:df:70:4b:46:de
- [ 707.623410] wlp10s0: send auth to e8:df:70:4b:46:de (try 1/3)
- [ 707.629116] wlp10s0: authenticated
- [ 707.629775] wlp10s0: associate with e8:df:70:4b:46:de (try 1/3)
- [ 707.638026] wlp10s0: RX AssocResp from e8:df:70:4b:46:de (capab=0x1431 status=0 aid=3)
- [ 707.638252] wlp10s0: associated
- [ 707.666270] IPv6: ADDRCONF(NETDEV_CHANGE): wlp10s0: link becomes ready
- [ 707.832332] wlp10s0: Limiting TX power to 20 (20 - 0) dBm as advertised by e8:df:70:4b:46:de
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement