Guest User

Untitled

a guest
Apr 16th, 2020
34
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. admin@Synology:~$
  2. Broadcast message from root@Synology
  3. (unknown) at 21:24 ...
  4.  
  5. The system is going down for reboot NOW!
  6. [10188.942066] init: synonetd main process (1590) killed by TERM signal
  7. [10188.975857] init: synostoraged main process (5448) terminated with status 15
  8. [10188.999510] init: hotplugd main process (6379) killed by TERM signal
  9. [10189.029313] init: smbd main process (6954) killed by TERM signal
  10. System is going to reboot.
  11. [10195.623783] usbcore: deregistering interface driver snd-usb-hiface
  12. [10195.800252] usbcore: deregistering interface driver snd-usb-audio
  13. [10196.473479] init: pkg-AudioStation-pgbouncer main process (9777) terminated with status 1
  14. [10215.319625] init: pkg-SynologyApplicationService-notification_send main process (9672) killed by TERM signal
  15. [10216.419700] init: pkg-SynologyApplicationService-pgbouncer main process (9747) terminated with status 1
  16. [10217.481074] init: pkg-SynologyApplicationService-VapidSendServer main process (9785) killed by TERM signal
  17. [10224.666519] init: synoscheduler-vmtouch main process (8343) killed by TERM signal
  18. [10224.691696] init: mkdhparam main process (7930) killed by TERM signal
  19. [10224.863915] init: Disconnected from D-Bus system bus
  20. [10228.765966] EXT4-fs (dm-0): re-mounted. Opts: (null)
  21. logout
  22. [10228.809729] init: skip respawn tty during shutdown
  23. [10229.155033] init: skip respawn syslog-ng during shutdown
  24. [10230.411143] md2: detected capacity change from 495160786944 to 0
  25. [10230.417178] md: md2: set sdb5 to auto_remap [0]
  26. [10230.421731] md: md2: set sda5 to auto_remap [0]
  27. [10230.426274] md: md2 stopped.
  28. [10230.429186] md: unbind<sdb5>
  29. [10230.471029] md: export_rdev(sdb5)
  30. [10230.474369] md: unbind<sda5>
  31. [10230.501057] md: export_rdev(sda5)
  32. [10232.094925] md: md0 in immediate safe mode
  33. [10232.099398] md: md1 in immediate safe mode
  34. [10232.106635] init: dhcp-client (eth0) main process (14595) killed by KILL signal
  35. [10232.131619] init: dhcp-client (eth1) main process (13593) killed by KILL signal
  36. [10233.221438] EXT4-fs (md0): re-mounted. Opts: (null)
  37. [10234.379468] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
  38. [10234.384842] sd 1:0:0:0: [sdb] Stopping disk
  39. [10235.261210] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  40. [10235.281201] sd 0:0:0:0: [sda] Stopping disk
  41. [10236.181716] Shutting Down Marvell Ethernet Driver
  42. [10236.186456] Disabling non-boot CPUs ...
  43. [10236.190943] CPU1: shutdown
  44. [10236.194669] Restarting system.
  45.  
  46. BootROM 1.20
  47. Booting from SPI flash
  48. High speed PHY - Version: 2.1.2 (COM-PHY-V20)
  49. Update PEX Device ID 0x78230
  50. High speed PHY - Ended Successfully
  51. DDR3 Training Sequence - Ver 4.5.0
  52. DDR3 Training Sequence - Ended Successfully
  53. Status = MV_OK
  54. BootROM: Image checksum verification PASSED
  55.  
  56. __ __ _ _
  57. | \/ | __ _ _ ____ _____| | |
  58. | |\/| |/ _` | '__\ \ / / _ \ | |
  59. | | | | (_| | | \ V / __/ | |
  60. |_| |_|\__,_|_| \_/ \___|_|_|
  61. _ _ ____ _
  62. | | | | | __ ) ___ ___ | |_
  63. | | | |___| _ \ / _ \ / _ \| __|
  64. | |_| |___| |_) | (_) | (_) | |_
  65. \___/ |____/ \___/ \___/ \__|
  66. ** LOADER **
  67.  
  68.  
  69. U-Boot 2011.12-SYNO-d7bdf8d-2013-12-11 (Dec 11 2013 - 17:58:54) Marvell version: v2011.12 2013_Q1.2
  70.  
  71. Board: Synology AXP 78230 4-bay/2-bay
  72. SoC: MV78230 B0
  73. running 2 CPUs
  74. Custom configuration
  75. CPU: Marvell PJ4B (584) v7 (Rev 2) LE
  76. CPU 0
  77. CPU @ 1333 [MHz]
  78. L2 @ 667 [MHz]
  79. TClock @ 250 [MHz]
  80. DDR @ 667 [MHz]
  81. DDR 32Bit Width, FastPath Memory Access
  82. DDR ECC Disabled
  83. DRAM: 1 GiB
  84.  
  85. Map: Code: 0x3fefb000:0x3ff9f630
  86. BSS: 0x3ffef33c
  87. Stack: 0x3f9eaef8
  88. Heap: 0x3f9eb000:0x3fefb000
  89.  
  90. MMC: MRVL_MMC: 0
  91. SF: Detected M25P64 with page size 64 KiB, total 8 MiB
  92. *** Warning - bad CRC, using default environment
  93.  
  94. PEX 0.0(0): Root Complex Interface, Detected Link X4, GEN 1.1
  95. PEX 1.0(1): Root Complex Interface, Detected Link X1, GEN 2.0
  96. PEX 1.1(2): Detected No Link.
  97. PEX 1.2(3): Detected No Link.
  98. FPU initialized to Run Fast Mode.
  99. USB 0: Host Mode
  100. USB 1: Host Mode
  101. USB 2: Device Mode
  102. Modules Detected:
  103.  
  104. Synology Model: DS414r1
  105. Fan Status: Not Good
  106. Fan 1: Not Good
  107. Fan 2: Not Good
  108.  
  109. Net: egiga0 [PRIME], egiga1
  110. Press Ctrl+C to abort autoboot in 3 second
  111. ## Booting kernel from Legacy Image at f40d0000 ...
  112. Image Name: Linux-3.2.40
  113. Created: 2020-04-14 6:26:32 UTC
  114. Image Type: ARM Linux Kernel Image (uncompressed)
  115. Data Size: 2125176 Bytes = 2 MiB
  116. Load Address: 00008000
  117. Entry Point: 00008000
  118. Verifying Checksum ... OK
  119. ## Loading init Ramdisk from Legacy Image at f43a0000 ...
  120. Image Name: synology_armadaxp_ds414 25423
  121. Created: 2020-04-14 7:59:00 UTC
  122. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  123. Data Size: 3560681 Bytes = 3.4 MiB
  124. Load Address: 08000000
  125. Entry Point: 08000000
  126. Verifying Checksum ... OK
  127. Loading Kernel Image ... OK
  128. OK
  129.  
  130. Starting kernel ...
  131.  
  132. Uncompressing Linux... done, booting the kernel.
  133. [ 0.000000] Booting Linux on physical CPU 0
  134. [ 0.000000] Linux version 3.2.40 (root@build2) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25423 SMP Tue Apr 14 14:26:16 CST 2020
  135. [ 0.000000] CPU: Marvell PJ4Bv7 Processor [562f5842] revision 2 (ARMv7), cr=10c53c7d
  136. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  137. [ 0.000000] Machine: Marvell Armada XP Development Board
  138. [ 0.000000] Using UBoot passing parameters structure
  139. [ 0.000000] Reserving training memory: base=0x (null) size=0x2800
  140. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  141. [ 0.000000] SMP: init cpus
  142. [ 0.000000] PERCPU: Embedded 7 pages/cpu @80dd2000 s5216 r8192 d15264 u32768
  143. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  144. [ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1
  145. [ 0.000000] Synology Hardware Version: DS414r1-j
  146. [ 0.000000] Internal HD num: 4
  147. [ 0.000000] Internal netif num: 2
  148. [ 0.000000] Special Sata LEDs.
  149. [ 0.000000] Support HDD Hotplug.
  150. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  151. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  152. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  153. [ 0.000000] Memory: 1024MB = 1024MB total
  154. [ 0.000000] Memory: 1025304k/1025304k available, 23272k reserved, 0K highmem
  155. [ 0.000000] Virtual kernel memory layout:
  156. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  157. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  158. [ 0.000000] vmalloc : 0xc0800000 - 0xfa800000 ( 928 MB)
  159. [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  160. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  161. [ 0.000000] .text : 0x80008000 - 0x80514000 (5168 kB)
  162. [ 0.000000] .init : 0x80514000 - 0x80545460 ( 198 kB)
  163. [ 0.000000] .data : 0x80546000 - 0x8056cee0 ( 156 kB)
  164. [ 0.000000] .bss : 0x8056cf04 - 0x805cbbcc ( 380 kB)
  165. [ 0.000000] Hierarchical RCU implementation.
  166. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  167. [ 0.000000] NR_IRQS:211
  168. [ 0.000000] Initializing ArmadaXP SOC Timer 0
  169. [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
  170. [ 146.135620] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
  171. [ 146.225541] pid_max: default: 32768 minimum: 301
  172. [ 146.225666] Security Framework initialized
  173. [ 146.225693] AppArmor: AppArmor initialized
  174. [ 146.225753] Mount-cache hash table entries: 512
  175. [ 146.226163] CPU: Testing write buffer coherency: ok
  176. [ 146.226287] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  177. [ 146.226300] SMP: prepare CPUs (4 cores)
  178. [ 146.226481] Setting Clocks for secondary CPUs
  179. [ 146.227269] SMP: CPU 0 Waking up CPU 1
  180. [ 146.232093] CPU1: Booted secondary processor
  181. [ 146.265530] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  182. [ 146.265582] Brought up 2 CPUs
  183. [ 146.265595] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
  184. [ 146.266210] devtmpfs: initialized
  185. [ 146.269821] xor: measuring software checksum speed
  186. [ 146.315500] arm4regs : 1292.000 MB/sec
  187. [ 146.365493] 8regs : 963.600 MB/sec
  188. [ 146.415494] 32regs : 1114.800 MB/sec
  189. [ 146.415502] xor: using function: arm4regs (1292.000 MB/sec)
  190. [ 146.415667] NET: Registered protocol family 16
  191. [ 146.417953] L0 cache Enabled
  192. [ 146.417963] Speculative Prefetch Disabled
  193. [ 146.417983] Aurora L2 Cache Enabled
  194. [ 146.418162] Support IO coherency.
  195. [ 146.521496]
  196. [ 146.521502] Marvell Armada-XP Synology AXP 78230 Board - Soc: MV78230 B0 LE
  197. [ 146.521519] Detected Tclk 250000000, SysClk 667000000, FabricClk 667000000, PClk 1333000000
  198. [ 146.521528] LSP version: linux-3.2.y-2013_Q1.2p2
  199. [ 146.521533]
  200. [ 146.522765] Synology ArmadaXP 4-bay GPIO Init
  201. [ 146.523221] registered dev#0 asa ehci_marvell
  202. [ 146.523532] Marvell USB EHCI Host controller #0: bf8aaa00
  203. [ 146.523638] registered dev#1 asa ehci_marvell
  204. [ 146.523944] Marvell USB EHCI Host controller #1: bf8aa800
  205. [ 146.524053] registered dev#2 asa mv_udc
  206. [ 146.524359] Marvell USB Gadget controller #2: bf8aa600
  207. [ 146.532181] bio: create slab <bio-0> at 0
  208. [ 146.695708] raid6: int32x1 162 MB/s
  209. [ 146.865582] raid6: int32x2 246 MB/s
  210. [ 147.035620] raid6: int32x4 303 MB/s
  211. [ 147.205618] raid6: int32x8 325 MB/s
  212. [ 147.205625] raid6: using algorithm int32x8 (325 MB/s)
  213. [ 147.206147] SCSI subsystem initialized
  214. [ 147.207360] Switching to clocksource axp_clocksource
  215. [ 147.207619] AppArmor: AppArmor Filesystem Enabled
  216. [ 147.209362] NET: Registered protocol family 2
  217. [ 147.209458] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  218. [ 147.209707] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  219. [ 147.210713] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  220. [ 147.211117] TCP: Hash tables configured (established 131072 bind 65536)
  221. [ 147.211126] TCP reno registered
  222. [ 147.211135] UDP hash table entries: 512 (order: 2, 16384 bytes)
  223. [ 147.211164] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  224. [ 147.211294] NET: Registered protocol family 1
  225. [ 147.211462] RPC: Registered named UNIX socket transport module.
  226. [ 147.211471] RPC: Registered udp transport module.
  227. [ 147.211478] RPC: Registered tcp transport module.
  228. [ 147.211484] RPC: Registered tcp NFSv4.1 backchannel transport module.
  229. [ 147.211647] Trying to unpack rootfs image as initramfs...
  230. [ 149.065652] rootfs image is not initramfs (no cpio magic); looks like an initrd
  231. [ 149.079625] Freeing initrd memory: 8192K
  232. [ 149.079728] PCI-E: Cheking physical bus #0 (controller #0): Enabled - Link UP
  233. [ 149.079919] PCI-E: Cheking physical bus #1 (controller #4): Enabled - Link UP
  234. [ 149.080090] PCI-E: Cheking physical bus #2 (controller #5): Enabled - No Link
  235. [ 149.080256] PCI-E: Cheking physical bus #3 (controller #6): Enabled - No Link
  236. [ 149.081044] PCI: bus0: Fast back to back transfers disabled
  237. [ 149.081626] PCI: bus1: Fast back to back transfers disabled
  238. [ 149.081838] pci 0000:01:00.0: BAR 0: assigned [mem 0xf2800000-0xf2807fff 64bit]
  239. [ 149.081856] pci 0000:01:00.0: BAR 0: set to [mem 0xf2800000-0xf2807fff 64bit] (PCI address [0xf2800000-0xf2807fff])
  240. [ 149.081871] pci 0000:00:00.0: BAR 0: assigned [mem 0xf2000000-0xf20fffff 64bit]
  241. [ 149.081886] pci 0000:00:00.0: BAR 0: set to [mem 0xf2000000-0xf20fffff 64bit] (PCI address [0xf2000000-0xf20fffff])
  242. [ 149.081897] pci 0000:00:00.0: BAR 2: can't assign io (size 0x100)
  243. [ 149.082289] cesadev_init(8051cdb0)
  244. [ 149.082852] Armada XP hwmon thermal sensor initialized.
  245. [ 149.082942] ArmadaXP Power Managament Suspend Operations Initialized
  246. [ 149.082950] Initializing Armada-XP CPU power management (WFI)
  247. [ 149.083566] audit: initializing netlink socket (disabled)
  248. [ 149.083596] type=2000 audit(2.940:1): initialized
  249. [ 149.084046] VFS: Disk quotas dquot_6.5.2
  250. [ 149.084112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  251. [ 149.084765] msgmni has been set to 2018
  252. [ 149.085585] async_tx: api initialized (async)
  253. [ 149.085727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  254. [ 149.085737] io scheduler noop registered
  255. [ 149.085783] io scheduler cfq registered (default)
  256. [ 149.085846] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
  257. [ 149.085879] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
  258. [ 149.117416] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
  259. [ 149.157411] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
  260. [ 149.177414] mv_xor mv_xor.2: Marvell XOR: ( xor )
  261. [ 149.197409] mv_xor mv_xor.3: Marvell XOR: ( fill cpy )
  262. [ 149.197840] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  263. [ 149.257586] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 41) is a 16550A
  264. [ 149.963580] console [ttyS0] enabled
  265. [ 149.997553] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 42) is a 16550A
  266. [ 150.043363] brd: module loaded
  267. [ 150.046428] Loading iSCSI transport class v2.0-870.
  268. [ 150.052269] sata_mv 0000:00:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
  269. [ 150.062012] scsi0 : sata_mv
  270. [ 150.065191] scsi1 : sata_mv
  271. [ 150.068328] scsi2 : sata_mv
  272. [ 150.071451] scsi3 : sata_mv
  273. [ 150.074544] ata1: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2022000 irq 58
  274. [ 150.082247] ata2: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2024000 irq 58
  275. [ 150.089933] ata3: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2026000 irq 58
  276. [ 150.097618] ata4: SATA max UDMA/133 mmio m1048576@0xf2000000 port 0xf2028000 irq 58
  277. [ 158.647397] ata1: link is slow to respond, please be patient (ready=0)
  278. [ 161.107422] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  279. [ 161.127806] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
  280. [ 161.133834] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  281. [ 161.157777] ata1.00: configured for UDMA/133
  282. [ 161.177697] scsi 0:0:0:0: Direct-Access SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
  283. [ 161.187059] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  284. [ 161.194719] sd 0:0:0:0: [sda] Write Protect is off
  285. [ 161.199605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  286. [ 161.226442] sda: sda1 sda2 sda3 < sda5 >
  287. [ 161.231684] sd 0:0:0:0: [sda] Attached SCSI disk
  288. [ 164.185815] Delay 5 seconds to wait for disk 2 ready.
  289. [ 174.737396] ata2: link is slow to respond, please be patient (ready=0)
  290. [ 176.957419] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  291. [ 176.977794] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7
  292. [ 176.983820] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  293. [ 177.007783] ata2.00: configured for UDMA/133
  294. [ 177.027635] scsi 1:0:0:0: Direct-Access SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
  295. [ 177.037004] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  296. [ 177.044687] sd 1:0:0:0: [sdb] Write Protect is off
  297. [ 177.049586] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  298. [ 177.076774] sdb: sdb1 sdb2 sdb3 < sdb5 >
  299. [ 177.082006] sd 1:0:0:0: [sdb] Attached SCSI disk
  300. [ 177.387415] ata3: SATA link down (SStatus 0 SControl 300)
  301. [ 177.737413] ata4: SATA link down (SStatus 0 SControl 300)
  302. [ 177.743046] sata_mv sata_mv.0: cannot get clkdev
  303. [ 177.747769] sata_mv sata_mv.0: slots 32 ports 2
  304. [ 177.753441] scsi4 : sata_mv
  305. [ 177.756564] scsi5 : sata_mv
  306. [ 177.759661] ata5: SATA max UDMA/133 irq 55
  307. [ 177.763772] ata6: SATA max UDMA/133 irq 55
  308. [ 178.117403] ata5: SATA link down (SStatus 0 SControl F300)
  309. [ 179.187400] ata6: failed to resume link (SControl 4)
  310. [ 179.192389] ata6: SATA link down (SStatus 0 SControl 4)
  311. [ 179.198571] physmap platform flash device: 00800000 at f0000000
  312. [ 179.207421] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB)
  313. [ 179.214337] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000
  314. [ 179.259556] 6 RedBoot partitions found on MTD device SYNOMTD-0
  315. [ 179.265406] SYNOMTD flash bank 0: Using RedBoot partition definition
  316. [ 179.271785] Creating 6 MTD partitions on "SYNOMTD-0":
  317. [ 179.276857] 0x000000000000-0x0000000d0000 : "RedBoot"
  318. [ 179.282741] 0x0000000d0000-0x0000003a0000 : "zImage"
  319. [ 179.288499] 0x0000003a0000-0x0000007d0000 : "rd.gz"
  320. [ 179.294179] 0x0000007d0000-0x0000007e0000 : "vendor"
  321. [ 179.299251] vender Mac0 address : 00:11:32:3a:b5:bf
  322. [ 179.304146] vender Mac1 address : 00:11:32:3a:b5:c0
  323. [ 179.309046] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
  324. [ 179.314895] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
  325. [ 179.320753] serial number='14B0MEN514301'
  326. [ 179.325392] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
  327. [ 179.332060] 0x0000007f0000-0x000000800000 : "FIS directory"
  328. [ 179.338527] mv_eth_probe: port_mask=0xf, cpu_mask=0x3
  329. [ 179.343875] o 4 Giga ports supported
  330. [ 179.347665] o SKB recycle supported (Enabled)
  331. [ 179.352209] o NETA acceleration mode 2
  332. [ 179.356142] o BM supported for CPU: 4 BM pools
  333. [ 179.360779] o RX Queue support: 1 Queues * 128 Descriptors
  334. [ 179.366455] o TX Queue support: 1 Queues * 532 Descriptors
  335. [ 179.372134] o GSO supported
  336. [ 179.375109] o GRO supported
  337. [ 179.378090] o Receive checksum offload supported
  338. [ 179.382893] o Transmit checksum offload supported
  339. [ 179.387792] o Driver ERROR statistics enabled
  340. [ 179.392334]
  341. [ 179.394006] o Loading network interface(s)
  342. [ 179.398300]
  343. [ 179.399796] o Port 0 is connected to Linux netdevice
  344. [ 179.405349] giga p=0: mtu=1500, mac=bf835e44
  345. [ 179.413588] o eth0, ifindex = 2, GbE port = 0
  346. [ 179.418166] o eth0, phy chipid = 1410dd0, Support WOL = 32
  347. [ 179.424199]
  348. [ 179.425702]
  349. [ 179.427197] o Port 1 is connected to Linux netdevice
  350. [ 179.432754] giga p=1: mtu=1500, mac=bf835e44
  351. [ 179.440957] o eth1, ifindex = 3, GbE port = 1
  352. [ 179.445503] o eth1, phy chipid = 1410dd0, Support WOL = 32
  353. [ 179.451575]
  354. [ 179.453073]
  355. [ 179.453075] o Warning: GbE port 2 is powered off
  356. [ 179.453079]
  357. [ 179.460869]
  358. [ 179.462586] i2c /dev entries driver
  359. [ 179.466606] Syno_HddMon: Initialization completed.
  360. [ 179.471429] md: linear personality registered for level -1
  361. [ 179.476931] md: raid0 personality registered for level 0
  362. [ 179.482264] md: raid1 personality registered for level 1
  363. [ 179.487596] md: raid10 personality registered for level 10
  364. [ 179.493098] md: raid6 personality registered for level 6
  365. [ 179.498429] md: raid5 personality registered for level 5
  366. [ 179.503755] md: raid4 personality registered for level 4
  367. [ 179.509388] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  368. [ 179.518043] cpuidle: using governor ladder
  369. [ 179.522482] cpuidle: using governor menu
  370. [ 179.526544] TCP cubic registered
  371. [ 179.529793] NET: Registered protocol family 17
  372. [ 179.534278] Registering the dns_resolver key type
  373. [ 179.539113] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
  374. [ 179.547268] registered taskstats version 1
  375. [ 179.551677] md: Waiting for all devices to be available before autodetect
  376. [ 179.558494] md: If you don't use raid, use raid=noautodetect
  377. [ 179.564675] md: Autodetecting RAID arrays.
  378. [ 179.609226] md: invalid raid superblock magic on sda5
  379. [ 179.614295] md: sda5 does not have a valid v0.90 superblock, not importing!
  380. [ 179.667951] md: invalid raid superblock magic on sdb5
  381. [ 179.673019] md: sdb5 does not have a valid v0.90 superblock, not importing!
  382. [ 179.680024] md: Scanned 6 and added 4 devices.
  383. [ 179.684481] md: autorun ...
  384. [ 179.687282] md: considering sda1 ...
  385. [ 179.690892] md: adding sda1 ...
  386. [ 179.694138] md: sda2 has different UUID to sda1
  387. [ 179.698701] md: adding sdb1 ...
  388. [ 179.701946] md: sdb2 has different UUID to sda1
  389. [ 179.706510] md: created md0
  390. [ 179.709319] md: bind<sdb1>
  391. [ 179.712065] md: bind<sda1>
  392. [ 179.714805] md: running: <sda1><sdb1>
  393. [ 179.718726] bio: create slab <bio-1> at 1
  394. [ 179.722880] md/raid1:md0: active with 2 out of 4 mirrors
  395. [ 179.787446] md0: detected capacity change from 0 to 2549940224
  396. [ 179.793390] md: considering sda2 ...
  397. [ 179.796991] md: adding sda2 ...
  398. [ 179.800250] md: adding sdb2 ...
  399. [ 179.803974] md: created md1
  400. [ 179.806778] md: bind<sdb2>
  401. [ 179.809531] md: bind<sda2>
  402. [ 179.812275] md: running: <sda2><sdb2>
  403. [ 179.816268] md/raid1:md1: active with 2 out of 4 mirrors
  404. [ 179.857490] md1: detected capacity change from 0 to 2147418112
  405. [ 179.863430] md: ... autorun DONE.
  406. [ 179.866845] RAMDISK: lzma image found at block 0
  407. [ 181.836151] VFS: Mounted root (ext2 filesystem) on device 1:0.
  408. START /linuxrc.syno
  409. Insert basic USB modules...
  410. :: Loading module usb-common ... [ OK ]
  411. :: Loading module usbcore[ 182.023862] usbcore: registered new interface driver usbfs
  412. [ 182.032630] usbcore: registered new interface driver hub
  413. [ 182.045747] usbcore: registered new interface driver ethub
  414. [ 182.061408] usbcore: registered new device driver usb
  415. ... [ OK ]
  416. :: Loading module ehci-hcd[ 182.115830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  417. [ 182.122491] ehci_marvell ehci_marvell.0: Marvell Orion EHCI
  418. [ 182.128185] ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1
  419. [ 182.157410] ehci_marvell ehci_marvell.0: irq 45, io base 0xfbc50100
  420. [ 182.177456] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00
  421. [ 182.184542] hub 1-0:1.0: USB hub found
  422. [ 182.188332] hub 1-0:1.0: 1 port detected
  423. [ 182.194884] ehci_marvell ehci_marvell.1: Marvell Orion EHCI
  424. [ 182.200541] ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2
  425. [ 182.237441] ehci_marvell ehci_marvell.1: irq 46, io base 0xfbc51100
  426. [ 182.257408] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00
  427. [ 182.264532] hub 2-0:1.0: USB hub found
  428. [ 182.268381] hub 2-0:1.0: 1 port detected
  429. ... [ OK ]
  430. :: Loading module xhci-hcd ... [ OK ]
  431. [ 182.401417] etxhci_hcd-161118 0000:01:00.0: Etron xHCI Host Controller
  432. [ 182.408066] etxhci_hcd-161118 0000:01:00.0: new USB bus registered, assigned bus number 3
  433. [ 182.425371] etxhci_hcd-161118 0000:01:00.0: Etron chip found.
  434. [ 182.431262] etxhci_hcd-161118 0000:01:00.0: irq 62, io mem 0xf2800000
  435. [ 182.439065] ethub 3-0:1.0: USB hub found
  436. [ 182.443020] ethub 3-0:1.0: 2 ports detected
  437. [ 182.449888] etxhci_hcd-161118 0000:01:00.0: Etron xHCI Host Controller
  438. [ 182.456468] etxhci_hcd-161118 0000:01:00.0: new USB bus registered, assigned bus number 4
  439. [ 182.477619] ethub 4-0:1.0: USB hub found
  440. [ 182.481578] ethub 4-0:1.0: 2 ports detected
  441. Insert net driver(Mindspeed only)...
  442. [ 182.528809] ds414_synobios: module license 'Synology Inc.' taints kernel.
  443. [ 182.535626] Disabling lock debugging due to kernel taint
  444. [ 182.549131] correction with 0x03
  445. [ 182.555705] 2020-4-15 20:26:42 UTC
  446. [ 182.559177] synobios: load, major number 201
  447. [ 182.563465] Brand: Synology
  448. [ 182.566289] Model: DS-414
  449. [ 182.568943] This is default settings: set group disks wakeup number to 1, spinup time deno 1
  450. [ 182.577439] synobios cpu_arch proc entry initialized
  451. [ 182.582419] synobios crypto_hw proc entry initialized
  452. [ 182.587497] synobios syno_platform proc entry initialized
  453. [ 182.593008] synobios open /dev/ttyS1 success
  454. Starting /usr/syno/bin/synocfgen...
  455. /usr/syno/bin/synocfgen returns 0
  456. [ 182.615401] synobios: unload
  457. Partition Version=8
  458. /sbin/e2fsck exists, checking /dev/md0...
  459. [ 182.697473] md0: unknown partition table
  460. /sbin/e2fsck -pvf returns 0
  461. Mounting /dev/md0 /tmpRoot
  462. [ 184.362325] EXT4-fs (md0): barriers disabled
  463. [ 184.375135] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
  464. ------------upgrade
  465. Begin upgrade procedure
  466. Found an upgrade file on data volume. Begin upgrade
  467. Checksum of system tarball verified.
  468. /tmpRoot//usr/syno/etc/synoservice.d ==> /tmpRoot/.syno/update_bkp//usr/syno/etc/synoservice.d/
  469. /tmpRoot//usr/syno/etc/timebkp ==> /tmpRoot/.syno/update_bkp//usr/syno/etc/timebkp/
  470. /tmpRoot//var/run ==> /tmpRoot/.syno/update_bkp//var/run/
  471. /tmpRoot//etc/postgresql/user.conf.d -> /tmpRoot/.upd@te_sub/etc/postgresql/user.conf.d/
  472. /tmpRoot//etc -> /tmpRoot/.upd@te/etc/
  473. /tmpRoot//usr/syno/etc -> /tmpRoot/.upd@te/usr/syno/etc/
  474. /tmpRoot//var -> /tmpRoot/.upd@te/var/
  475. /tmpRoot//usr/syno/synoman/webman/3rdparty -> /tmpRoot/.upd@te/usr/syno/synoman/webman/3rdparty/
  476. /tmpRoot//usr/local -> /tmpRoot/.upd@te/usr/local/
  477. Removing /tmpRoot/.upd@te//etc/ftpusers...
  478. Removing /tmpRoot/.upd@te//etc/rc...
  479. Removing /tmpRoot/.upd@te//etc/rc.network...
  480. Removing /tmpRoot/.upd@te//usr/syno/etc/rc.atalk...
  481. Removing /tmpRoot/.upd@te//usr/syno/etc/.htpasswd...
  482. Removing /tmpRoot/.upd@te//usr/syno/etc/lpd/lpd.conf...
  483. Removing /tmpRoot/.upd@te//usr/syno/etc/printcap...
  484. Removing /tmpRoot/.upd@te//usr/syno/etc/ups.conf...
  485. Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.conf...
  486. Removing /tmpRoot/.upd@te//usr/syno/etc/upsd.users...
  487. Removing /tmpRoot/.upd@te//usr/syno/etc/upsmon.conf...
  488. Removing /tmpRoot/.upd@te//usr/syno/etc/upssched.conf...
  489. Removing /tmpRoot/.upd@te//etc/lvm/lvm.conf...
  490. Removing /tmpRoot/.upd@te//usr/local/etc/rc.d/SynoEnablePersonalServices.sh...
  491. Removing /tmpRoot/.upd@te//etc/rc.network_routing...
  492. Removing /tmpRoot/.upd@te//usr/syno/etc/rc.tun...
  493. Removing /tmpRoot/.upd@te//usr/syno/etc/afpd.conf...
  494. Removing /tmpRoot/.upd@te//etc/pam.d/samba...
  495. Removing /tmpRoot/.upd@te//etc/ppp/ip-up...
  496. Removing /tmpRoot/.upd@te//etc/ppp/ip-down...
  497. Removing /tmpRoot/.upd@te//etc/ppp/ip-function...
  498. Removing /tmpRoot/.upd@te//etc/ppp/ipv6-up...
  499. Removing /tmpRoot/.upd@te//etc/ppp/ipv6-down...
  500. Removing /tmpRoot/.upd@te//etc/ppp/options...
  501. Removing /tmpRoot/.upd@te//usr/local/cups/mime.types...
  502. Removing /tmpRoot/.upd@te//usr/local/cups/mime.convs...
  503. Removing /tmpRoot/.upd@te//etc/cups/cupsd.conf...
  504. Removing /tmpRoot/.upd@te//usr/local/cups/cupsd.conf...
  505. Removing /tmpRoot/.upd@te//usr/local/cups/testprint...
  506. Removing /tmpRoot/.upd@te//usr/local/cups/filter/bannertops...
  507. Removing /tmpRoot/.upd@te//usr/local/cups/filter/commandtops...
  508. Removing /tmpRoot/.upd@te//usr/local/cups/filter/gziptoany...
  509. Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetops...
  510. Removing /tmpRoot/.upd@te//usr/local/cups/filter/imagetoraster...
  511. Removing /tmpRoot/.upd@te//usr/local/cups/filter/pdftops...
  512. Removing /tmpRoot/.upd@te//usr/local/cups/filter/pstops...
  513. Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertoepson...
  514. Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertohp...
  515. Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertolabel...
  516. Removing /tmpRoot/.upd@te//usr/local/cups/filter/rastertopwg...
  517. Removing /tmpRoot/.upd@te//usr/local/cups/filter/texttops...
  518. Removing /tmpRoot/.upd@te//usr/local/cups/filter/hpgltops...
  519. Removing /tmpRoot/.upd@te//etc/hostapd/stainfo.sh...
  520. Removing /tmpRoot/.upd@te//etc/hostapd/mac_filter/mfscript.sh...
  521. Removing /tmpRoot/.upd@te//usr/syno/etc/rfkill.sh...
  522. Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_guest_net.sh...
  523. Removing /tmpRoot/.upd@te//etc/ld.so.preload...
  524. Removing /tmpRoot/.upd@te//etc/tc/default.cmd...
  525. Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcert.sh...
  526. Removing /tmpRoot/.upd@te//usr/syno/etc/ssl/mkcgikey.sh...
  527. Removing /tmpRoot/.upd@te//etc/logrotate.conf...
  528. Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/wcdma_list.json...
  529. Removing /tmpRoot/.upd@te//usr/syno/etc/usbmodem/usb_modeswitch.d/*...
  530. Removing /tmpRoot/.upd@te//etc/php/php.ini...
  531. Removing /tmpRoot/.upd@te//etc/php/php-fpm.conf...
  532. Removing /tmpRoot/.upd@te//etc/php/conf.d/opcache.ini...
  533. Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/global.setting...
  534. Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d/system.cfg...
  535. Removing /tmpRoot/.upd@te//usr/syno/etc/ssdp/dsm_desc.xml...
  536. Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_time_ctrl.sh...
  537. Removing /tmpRoot/.upd@te//etc/profile...
  538. Removing /tmpRoot/.upd@te//etc/inputrc...
  539. Removing /tmpRoot/.upd@te//etc/dhclient/dhclient-script...
  540. Removing /tmpRoot/.upd@te//etc/dhclient/ipv4/dhclient.conf...
  541. Removing /tmpRoot/.upd@te//etc/dhclient/ipv6/dhclient.conf...
  542. Removing /tmpRoot/.upd@te//usr/syno/etc/www/SSLProfile.json...
  543. Removing /tmpRoot/.upd@te//etc/vimrc...
  544. Removing /tmpRoot/.upd@te//usr/syno/etc/cacert.pem...
  545. Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_modules_list...
  546. Removing /tmpRoot/.upd@te//usr/syno/etc/iptables_chain_list...
  547. Removing /tmpRoot/.upd@te//usr/local/bin/python*...
  548. Removing /tmpRoot/.upd@te//etc/sudoers...
  549. Removing /tmpRoot/.upd@te//usr/syno/etc/autoupdate.notify...
  550. Removing /tmpRoot/.upd@te//etc/pam.d...
  551. Removing /tmpRoot/.upd@te//usr/syno/etc/vfs...
  552. Removing /tmpRoot/.upd@te//var/run...
  553. Removing /tmpRoot/.upd@te//var/update...
  554. Removing /tmpRoot/.upd@te//var/state/ups...
  555. Removing /tmpRoot/.upd@te//usr/syno/etc/ups...
  556. Removing /tmpRoot/.upd@te//var/spool/postfix...
  557. Removing /tmpRoot/.upd@te//usr/local/cups/backend...
  558. Removing /tmpRoot/.upd@te//usr/local/cups/mime...
  559. Removing /tmpRoot/.upd@te//etc/fw_security/sysconf...
  560. Removing /tmpRoot/.upd@te//etc/init...
  561. Removing /tmpRoot/.upd@te//etc/logrotate.d...
  562. Removing /tmpRoot/.upd@te//etc/syslog-ng...
  563. Removing /tmpRoot/.upd@te//var/lib/dpkg...
  564. Removing /tmpRoot/.upd@te//etc/httpd/conf...
  565. Removing /tmpRoot/.upd@te//etc/postgresql...
  566. Removing /tmpRoot/.upd@te//etc/nginx...
  567. Removing /tmpRoot/.upd@te//etc/wide-dhcpv6...
  568. Removing /tmpRoot/.upd@te//etc/apparmor.d...
  569. Removing /tmpRoot/.upd@te//usr/syno/etc/synoservice.d...
  570. Removing /tmpRoot/.upd@te//var/dynlib...
  571. Removing /tmpRoot/.upd@te//etc/iproute2/script...
  572. Removing /tmpRoot/.upd@te//etc/ssl/certs...
  573. Removing /tmpRoot/.upd@te//etc/dbus-1...
  574. Removing /tmpRoot/.upd@te//usr/syno/etc/dbus-1...
  575. Removing /tmpRoot/.upd@te//etc/avahi...
  576. Removing /tmpRoot/.upd@te//usr/syno/etc/synovpnclient/scripts...
  577. Removing /tmpRoot/.upd@te//var/lib/apparmor...
  578. Removing /tmpRoot/.upd@te//usr/syno/etc/www/app.d...
  579. Removing /tmpRoot/.upd@te//usr/syno/etc/rc.d...
  580. Removing /tmpRoot/.upd@te//usr/syno/etc/bluetooth/...
  581. Removing /tmpRoot/.upd@te//usr/syno/etc/smallupdate_patch...
  582. Removing /tmpRoot/.upd@te//etc/ImageMagick-6...
  583. Removing /tmpRoot/.upd@te//usr/syno/etc/logcollector...
  584. Removing /tmpRoot/.upd@te//var/cache/texts...
  585. chmod: /tmpRoot/.upd@te/root: No such file or directory
  586. [ 200.465443] md1: unknown partition table
  587. Setting up swapspace version 1, size = 2147414016 bytes
  588. [ 200.532060] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
  589. Untaring /tmpRoot/.SynoUpgrade.tar...
  590. temporarily remove +a flag from files in backup dir:
  591. restore +a attribute after config restored:
  592. [ 217.660599] correction with 0x03
  593. [ 217.665742] 2020-4-15 20:27:17 UTC
  594. [ 217.669178] synobios: load, major number 201
  595. [ 217.673470] Brand: Synology
  596. [ 217.676296] Model: DS-414
  597. [ 217.678945] This is default settings: set group disks wakeup number to 1, spinup time deno 1
  598. [ 217.687437] synobios cpu_arch proc entry initialized
  599. [ 217.692417] synobios crypto_hw proc entry initialized
  600. [ 217.697489] synobios syno_platform proc entry initialized
  601. [ 217.702998] synobios open /dev/ttyS1 success
  602. mknod: /dev/synobios: File exists
  603. Starting /usr/syno/bin/synohdcfgen...
  604. /usr/syno/bin/synohdcfgen returns 0
  605. [ 217.727880] synobios: unload
  606. End upgrade procedure
  607. ============upgrade
  608. ls: /tmpRoot/usr/share/init/root-file-system.override: No such file or directory
  609. ls: /tmpRoot/usr/share/init/hostname.override: No such file or directory
  610. ls: /tmpRoot/usr/share/init/syslog-ng.override: No such file or directory
  611. ls: /tmpRoot/usr/share/init/dsmupdate.override: No such file or directory
  612. ls: /tmpRoot/usr/share/init/smallupdate.override: No such file or directory
  613. ls: /tmpRoot/usr/share/init/rc.override: No such file or directory
  614. Wait 2 seconds for synology manufactory device
  615. Wed Apr 15 20:27:20 UTC 2020
  616. /dev/md0 /tmpRoot ext4 rw,relatime,user_xattr,barrier=0,journal_checksum,data=ordered 0 0
  617. sys /sys sysfs rw,relatime 0 0
  618. /dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0
  619. none /dev devtmpfs rw,relatime,size=512652k,nr_[ 221.676950] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
  620. inodes=128163,mode=755 0 0
  621. proc /proc proc rw,relatime 0 0
  622. linuxrc.syno executed successfully.
  623. [ 221.727720] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
  624. [ 221.735603] VFS: Mounted root (ext4 filesystem) on device 9:0.
  625. [ 221.741467] Trying to move old root to /initrd ... okay
  626. [ 221.753931] Freeing init memory: 196K
  627. [ 222.658067] EXT4-fs (md0): re-mounted. Opts: (null)
  628. [ 242.324577] sd 0:0:0:0: Attached scsi generic sg0 type 0
  629. [ 242.330159] sd 1:0:0:0: Attached scsi generic sg1 type 0
  630. [ 243.286453] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
  631. ==================== start udevd ====================
  632. [ 259.985309] NET: Registered protocol family 10
  633. [ 260.025655] IPv6 over IPv4 tunneling driver
  634. [ 260.827938] init: syno-auth-check main process (2182) killed by TERM signal
  635. [ 261.744937] mvCesaInit: channels=2, session=640, queue=64
  636. [ 261.841944] encryptfs using the OCF package.
  637. [ 262.071312] systemd-udevd[2613]: starting version 204
  638. ===== trigger device plug event =====
  639. [ 262.187342] fuse init (API version 7.22)
  640. [ 263.018440] Loading modules backported from Linux version v3.12-0-g5e01dc7
  641. [ 263.025342] Backport generated by backports.git v3.12-1-0-g9ae6b6c
  642. [ 263.923648] exFAT: Version 1.2.9
  643. [ 264.697873] correction with 0x03
  644. [ 264.707506] 2020-4-15 20:28:4 UTC
  645. [ 264.710839] synobios: load, major number 201
  646. [ 264.715137] Brand: Synology
  647. [ 264.718014] Model: DS-414
  648. [ 264.720663] This is default settings: set group disks wakeup number to 1, spinup time deno 1
  649. [ 264.729177] synobios cpu_arch proc entry initialized
  650. [ 264.734165] synobios crypto_hw proc entry initialized
  651. [ 264.739256] synobios syno_platform proc entry initialized
  652. [ 264.744791] synobios open /dev/ttyS1 success
  653. [ 267.176663] eth0: mac address changed
  654. [ 267.356038] eth1: mac address changed
  655. [ 267.676872] pool #0: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
  656. [ 267.687757] pool #2: pkt_size=256, buf_size=352 - 3072 of 3072 buffers added
  657. [ 267.694883] eth0: link up
  658. [ 267.697568] eth0: started
  659. [ 269.614538] pool #1: pkt_size=1536, buf_size=1632 - 2048 of 2048 buffers added
  660. [ 269.625593] pool #3: pkt_size=256, buf_size=352 - 3072 of 3072 buffers added
  661. [ 269.632743] eth1: started
  662. [ 269.666271] ADDRCONF(NETDEV_UP): eth1: link is not ready
  663. [ 270.118646] init: dhcp-client (eth0) main process (4337) killed by TERM signal
  664. [ 272.892039] md: md2 stopped.
  665. [ 272.905587] md: bind<sda5>
  666. [ 272.912661] md: bind<sdb5>
  667. [ 272.957442] md/raid1:md2: active with 2 out of 2 mirrors
  668. [ 272.977656] md2: detected capacity change from 0 to 495160786944
  669. [ 273.022985] md2: unknown partition table
  670. [ 277.731410] EXT4-fs (dm-0): barriers disabled
  671. [ 277.891163] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
  672. [ 285.046027] Initializing USB Mass Storage driver...
  673. [ 285.051121] usbcore: registered new interface driver usb-storage
  674. [ 285.057149] USB Mass Storage support registered.
  675. [ 285.148062] usbcore: registered new interface driver usblp
  676. [ 285.350709] usbcore: registered new interface driver usbhid
  677. [ 285.356316] usbhid: USB HID core driver
  678. [ 285.597352] iSCSI: init_io_buffer_head(833) LUN-backup: 512 buffers allocated, total 2097152 bytes successfully
  679.  
  680. Synology login: a[ 293.742299] warning: `nginx' uses 32-bit capabilities (legacy support in use)
  681. [ 293.748398] warning: `nginx' uses 32-bit capabilities (legacy support in use)
  682. dmi[ 294.227893] ata1.00: configured for UDMA/133
  683. [ 294.232199] ata1: EH complete
  684. n
  685. Password: [ 295.507904] ata2.00: configured for UDMA/133
  686. [ 295.512275] ata2: EH complete
  687.  
  688. admin@Synology:~$ [ 304.188531] loop: module loaded
  689. [ 308.957747] findhostd uses obsolete (PF_INET,SOCK_PACKET)
  690. [ 309.005336] init: synoscheduler-vmtouch main process (1570) killed by TERM signal
RAW Paste Data