API tools faq
paste
rnayak

2420 N800 Bootlog

rnayak
Jun 14th, 2012
89
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.58 KB | None | 0 0
raw download clone embed print report
  1. OMAP242x H4 # dhcp    bootm 0x80000 0000 0x81000000
  2. ## Booting kernel from Legacy Image at 80000000 ...
  3. Image Name: Linux-3.5.0-rc2-10691-gd563c0b
  4. Image Type: ARM Linux Kernel Image (uncompressed)
  5. Data Size: 3812240 Bytes = 3.6 MiB
  6. Load Address: 80008000
  7. Entry Point: 80008000
  8. Verifying Checksum ... OK
  9. ## Loading init Ramdisk from Legacy Image at 81000000 ...
  10. Image Name: OMAP Linux Ramdisk
  11. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  12. Data Size: 4321792 Bytes = 4.1 MiB
  13. Load Address: 81000000
  14. Entry Point: 81000000
  15. Verifying Checksum ... OK
  16. Loading Kernel Image ... OK
  17. OK
  18.  
  19. Starting kernel ...
  20.  
  21. Uncompressing Linux... done, booting the kernel.
  22. [ 0.000000] Booting Linux on physical CPU 0
  23. [ 0.000000] Linux version 3.5.0-rc2-10691-gd563c0b (a0131687@ula0131687) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #58 SMP Wed Jun 13 18:07:04 IST 2012
  24. [ 0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2 (ARMv6TEJ), cr=00c5387d
  25. [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
  26. [ 0.000000] Machine: OMAP2420 H4 board
  27. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  28. [ 0.000000] OMAP2420
  29. [ 0.000000]
  30. [ 0.000000] Clocking rate (Crystal/DPLL/MPU): 12.0/600/300 MHz
  31. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d24000 s11520 r8192 d13056 u32768
  32. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16000
  33. [ 0.000000] Kernel command line: console=ttyO0,115200n8 mem=64M ip=dhcp earlyprintk
  34. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  35. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  36. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  37. [ 0.000000] Memory: 63MB = 63MB total
  38. [ 0.000000] Memory: 46740k/46740k available, 18796k reserved, 0K highmem
  39. [ 0.000000] Virtual kernel memory layout:
  40. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  41. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  42. [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB)
  43. [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  44. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  45. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  46. [ 0.000000] .text : 0xc0008000 - 0xc0660470 (6498 kB)
  47. [ 0.000000] .init : 0xc0661000 - 0xc06afd00 ( 316 kB)
  48. [ 0.000000] .data : 0xc06b0000 - 0xc0747d30 ( 608 kB)
  49. [ 0.000000] .bss : 0xc0747d54 - 0xc0ca0508 (5474 kB)
  50. [ 0.000000] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  51. [ 0.000000] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  52. [ 0.000000] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  53. [ 0.000000] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  54. [ 0.000000] Hierarchical RCU implementation.
  55. [ 0.000000] NR_IRQS:474
  56. [ 0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96 interrupts
  57. [ 0.000000] Total of 96 interrupts on 1 active controller
  58. [ 0.000000] omap_hwmod: mpu: missing clockdomain for mpu_ck.
  59. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  60. [ 0.000000] omap_hwmod: counter_32k: missing clockdomain for func_32k_ck.
  61. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  62. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  63. [ 0.000000] Console: colour dummy device 80x30
  64. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  65. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  66. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  67. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  68. [ 0.000000] ... CLASSHASH_SIZE: 4096
  69. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  70. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  71. [ 0.000000] ... CHAINHASH_SIZE: 16384
  72. [ 0.000000] memory used by lock dependency info: 3695 kB
  73. [ 0.000000] per task-struct memory footprint: 1152 bytes
  74. [ 0.101318] Calibrating delay loop... 297.74 BogoMIPS (lpj=1161216)
  75. [ 0.101348] pid_max: default: 32768 minimum: 301
  76. [ 0.102905] Security Framework initialized
  77. [ 0.103515] Mount-cache hash table entries: 512
  78. [ 0.117370] CPU: Testing write buffer coherency: ok
  79. [ 0.119140] CPU0: thread -1, cpu 0, socket -1, mpidr 4107b362
  80. [ 0.119293] Setting up static identity map for 0x804a57e0 - 0x804a5850
  81. [ 0.124053] Brought up 1 CPUs
  82. [ 0.124114] SMP: Total of 1 processors activated (297.74 BogoMIPS).
  83. [ 0.153747] omap_hwmod: dma: missing clockdomain for core_l3_ck.
  84. [ 0.175537] dummy:
  85. [ 0.182006] NET: Registered protocol family 16
  86. [ 0.182861] GPMC revision 2.0
  87. [ 0.183471] gpmc: irq-20 could not claim: err -22
  88. [ 0.208007] OMAP GPIO hardware version 1.8
  89. [ 0.242797] omap2420_mux_init: No ball data available for omap2420 package
  90. [ 0.242889] omap_mux_init: Add partition: #1: core, flags: 3
  91. [ 0.249053] USB: hmc 0, usb0 3 wires
  92. [ 0.325988] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  93. [ 0.326049] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  94. [ 0.326080] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  95. [ 0.326110] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  96. [ 0.326141] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  97. [ 0.326171] hw-breakpoint: CPUID feature registers not supported. Assuming v6 debug is present.
  98. [ 0.326232] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  99. [ 0.326232] hw-breakpoint: maximum watchpoint size is 4 bytes.
  100. [ 0.375793] OMAP DMA hardware revision 2.0
  101. [ 0.597869] bio: create slab <bio-0> at 0
  102. [ 0.623931] SCSI subsystem initialized
  103. [ 0.633270] usbcore: registered new interface driver usbfs
  104. [ 0.635101] usbcore: registered new interface driver hub
  105. [ 0.637695] usbcore: registered new device driver usb
  106. [ 0.668853] Switching to clocksource 32k_counter
  107. [ 0.986358] NET: Registered protocol family 2
  108. [ 0.988708] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  109. [ 0.994628] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  110. [ 0.995239] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
  111. [ 0.997741] TCP: Hash tables configured (established 2048 bind 2048)
  112. [ 0.998016] TCP: reno registered
  113. [ 0.998352] UDP hash table entries: 256 (order: 2, 20480 bytes)
  114. [ 0.999114] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  115. [ 1.001464] NET: Registered protocol family 1
  116. [ 1.005432] RPC: Registered named UNIX socket transport module.
  117. [ 1.005523] RPC: Registered udp transport module.
  118. [ 1.005554] RPC: Registered tcp transport module.
  119. [ 1.005584] RPC: Registered tcp NFSv4.1 backchannel transport module.
  120. [ 1.008422] Trying to unpack rootfs image as initramfs...
  121. [ 1.265228] Freeing initrd memory: 4220K
  122. [ 1.265502] NetWinder Floating Point Emulator V0.97 (double precision)
  123. [ 1.734954] VFS: Disk quotas dquot_6.5.2
  124. [ 1.735870] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  125. [ 1.739959] NFS: Registering the id_resolver key type
  126. [ 1.742004] Key type id_resolver registered
  127. [ 1.745452] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  128. [ 1.748901] msgmni has been set to 99
  129. [ 1.759796] io scheduler noop registered
  130. [ 1.759857] io scheduler deadline registered
  131. [ 1.760375] io scheduler cfq registered (default)
  132. [ 1.767547] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  133. [ 1.788421] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  134. [ 2.495544] console [ttyO0] enabled
  135. [ 2.504241] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  136. [ 2.516601] omap_uart.2: ttyO2 at MMIO 0x4806e000 (irq = 74) is a OMAP UART2
  137. [ 2.536071] omap_rng omap_rng: OMAP Random Number Generator ver. 40
  138. [ 2.643615] brd: module loaded
  139. [ 2.706085] loop: module loaded
  140. [ 2.728271] mtdoops: mtd device (mtddev=name/number) must be supplied
  141. [ 2.737762] OneNAND driver initializing
  142. [ 2.778106] usbcore: registered new interface driver asix
  143. [ 2.786102] usbcore: registered new interface driver cdc_ether
  144. [ 2.794647] usbcore: registered new interface driver smsc95xx
  145. [ 2.803222] usbcore: registered new interface driver net1080
  146. [ 2.811340] usbcore: registered new interface driver cdc_subset
  147. [ 2.819610] usbcore: registered new interface driver zaurus
  148. [ 2.827697] usbcore: registered new interface driver cdc_ncm
  149. [ 2.838653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  150. [ 2.849639] usbcore: registered new interface driver cdc_wdm
  151. [ 2.856018] Initializing USB Mass Storage driver...
  152. [ 2.863250] usbcore: registered new interface driver usb-storage
  153. [ 2.869995] USB Mass Storage support registered.
  154. [ 2.878448] usbcore: registered new interface driver libusual
  155. [ 2.886779] usbcore: registered new interface driver usbtest
  156. [ 2.898498] mousedev: PS/2 mouse device common for all mice
  157. [ 2.918365] i2c /dev entries driver
  158. [ 2.924133] Driver for 1-wire Dallas network protocol.
  159. [ 2.939666] omap_wdt: OMAP Watchdog Timer Rev 0x11: initial timeout 60 sec
  160. [ 2.964172] usbcore: registered new interface driver usbhid
  161. [ 2.970581] usbhid: USB HID core driver
  162. [ 2.974792] oprofile: hardware counters not available
  163. [ 2.980133] oprofile: using timer interrupt.
  164. [ 2.986816] TCP: cubic registered
  165. [ 2.990570] Initializing XFRM netlink socket
  166. [ 2.995483] NET: Registered protocol family 17
  167. [ 3.000640] NET: Registered protocol family 15
  168. [ 3.007751] Key type dns_resolver registered
  169. [ 3.012573] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2
  170. [ 3.021209] mux: Failed to setup hwmod io irq -22
  171. [ 3.040710] Power Management for OMAP2 initializing
  172. [ 3.046081] PRCM revision 1.0
  173. [ 3.063598] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  174. [ 15.172424] Freeing init memory: 312K
  175.  
  176. System initialization...
  177.  
  178. Mounting /proc :[SUCCESS]
  179. Mounting /sys :[SUCCESS]
  180. Mounting /dev :[SUCCESS]
  181. Mounting /dev/pts :[SUCCESS]
  182. Mounting /sys/kernel/debug :[SUCCESS]
  183. Mounting other filesystems :[SUCCESS]
  184. Enabling hot-plug :[SUCCESS]
  185. Populating /dev :[SUCCESS]
  186. Starting syslogd :[SUCCESS]
  187. Starting telnetd :[SUCCESS]
  188.  
  189. System initialization complete.
  190.  
  191. Please press Enter to activate this console.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!