Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.10.63-v8 (root@localhost) (gcc (Gentoo 11.3.0 p4) 11.3.0, GNU ld (Gentoo 2.38 p4) 2.38) #2 SMP PREEMPT Mon Sep 26 10:27:27 EDT 2022
- [ 0.000000] random: fast init done
- [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff]
- [ 0.000000] On node 0 totalpages: 242688
- [ 0.000000] DMA zone: 3792 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 242688 pages, LIFO batch:63
- [ 0.000000] percpu: Embedded 31 pages/cpu s87320 r8192 d31464 u126976
- [ 0.000000] pcpu-alloc: s87320 r8192 d31464 u126976 alloc=31*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] CPU features: detected: ARM erratum 843419
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 238896
- [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 fsck.repair=yes rootwait
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 864048K/970752K available (10496K kernel code, 1810K rwdata, 3620K rodata, 3392K init, 1210K bss, 41168K reserved, 65536K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] ftrace: allocating 32614 entries in 128 pages
- [ 0.000000] ftrace: allocated 128 pages with 1 groups
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] Trampoline variant of Tasks RCU enabled.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] random: get_random_bytes called from start_kernel+0x3b4/0x57c with crng_init=1
- [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000288] Console: colour dummy device 80x25
- [ 0.001165] printk: console [tty1] enabled
- [ 0.001240] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
- [ 0.001301] pid_max: default: 32768 minimum: 301
- [ 0.001529] LSM: Security Framework initializing
- [ 0.001801] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.001863] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.003496] cgroup: Disabling memory control group subsystem
- [ 0.006769] rcu: Hierarchical SRCU implementation.
- [ 0.007991] EFI services will not be available.
- [ 0.008775] smp: Bringing up secondary CPUs ...
- [ 0.010217] Detected VIPT I-cache on CPU1
- [ 0.010299] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.011939] Detected VIPT I-cache on CPU2
- [ 0.011997] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.013565] Detected VIPT I-cache on CPU3
- [ 0.013620] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.013836] smp: Brought up 1 node, 4 CPUs
- [ 0.013981] SMP: Total of 4 processors activated.
- [ 0.014016] CPU features: detected: 32-bit EL0 Support
- [ 0.014051] CPU features: detected: CRC32 instructions
- [ 0.051858] CPU: All CPU(s) started at EL2
- [ 0.051977] alternatives: patching kernel code
- [ 0.053960] devtmpfs: initialized
- [ 0.074588] Enabled cp15_barrier support
- [ 0.074668] Enabled setend support
- [ 0.074724] KASLR enabled
- [ 0.075052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.075118] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.078710] pinctrl core: initialized pinctrl subsystem
- [ 0.079893] DMI not present or invalid.
- [ 0.080442] NET: Registered protocol family 16
- [ 0.091591] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
- [ 0.092142] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.093773] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.094050] audit: initializing netlink subsys (disabled)
- [ 0.094531] audit: type=2000 audit(0.093:1): state=initialized audit_enabled=0 res=1
- [ 0.095266] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.095585] cpuidle: using governor menu
- [ 0.095902] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.096191] ASID allocator initialised with 32768 entries
- [ 0.096413] Serial: AMBA PL011 UART driver
- [ 0.120564] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.122941] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-11-18T16:18:09, variant start
- [ 0.123945] raspberrypi-firmware soc:firmware: Firmware hash is d9b293558b4cef6aabedcc53c178e7604de90788
- [ 0.169085] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
- [ 0.172018] SCSI subsystem initialized
- [ 0.172367] usbcore: registered new interface driver usbfs
- [ 0.172481] usbcore: registered new interface driver hub
- [ 0.172621] usbcore: registered new device driver usb
- [ 0.174505] clocksource: Switched to clocksource arch_sys_counter
- [ 1.959861] VFS: Disk quotas dquot_6.6.0
- [ 1.960022] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.960282] FS-Cache: Loaded
- [ 1.960752] CacheFiles: Loaded
- [ 1.975291] NET: Registered protocol family 2
- [ 1.975672] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 1.977378] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
- [ 1.977455] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 1.977758] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
- [ 1.977984] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.978299] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 1.978383] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 1.978850] NET: Registered protocol family 1
- [ 1.980044] RPC: Registered named UNIX socket transport module.
- [ 1.980082] RPC: Registered udp transport module.
- [ 1.980114] RPC: Registered tcp transport module.
- [ 1.980145] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.982138] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 1.984279] Initialise system trusted keyrings
- [ 1.984770] workingset: timestamp_bits=46 max_order=18 bucket_order=0
- [ 1.995576] zbud: loaded
- [ 1.998407] FS-Cache: Netfs 'nfs' registered for caching
- [ 1.999374] NFS: Registering the id_resolver key type
- [ 1.999443] Key type id_resolver registered
- [ 1.999516] Key type id_legacy registered
- [ 1.999711] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.999752] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 2.001503] Key type asymmetric registered
- [ 2.001540] Asymmetric key parser 'x509' registered
- [ 2.001625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 2.001668] io scheduler mq-deadline registered
- [ 2.001702] io scheduler kyber registered
- [ 2.007228] bcm2708_fb soc:fb: FB found 1 display(s)
- [ 2.078204] Console: switching to colour frame buffer device 210x65
- [ 2.107372] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1680x1050
- [ 2.115279] bcm2835-rng 3f104000.rng: hwrng registered
- [ 2.116033] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
- [ 2.117569] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- [ 2.118311] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 2.136653] brd: module loaded
- [ 2.156035] loop: module loaded
- [ 2.158451] Loading iSCSI transport class v2.0-870.
- [ 2.161054] libphy: Fixed MDIO Bus: probed
- [ 2.161587] usbcore: registered new interface driver lan78xx
- [ 2.161831] usbcore: registered new interface driver smsc95xx
- [ 2.162023] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 2.890865] Core Release: 2.80a
- [ 2.890987] Setting default values for core params
- [ 2.891164] Finished setting default values for core params
- [ 3.091853] Using Buffer DMA mode
- [ 3.091976] Periodic Transfer Interrupt Enhancement - disabled
- [ 3.092158] Multiprocessor Interrupt Enhancement - disabled
- [ 3.092334] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 3.092503] Dedicated Tx FIFOs mode
- [ 3.093631] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = ffffffc010461000 dma = 0x00000000f7810000 len=9024
- [ 3.094030] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- [ 3.094665] dwc_otg: Microframe scheduler enabled
- [ 3.094738] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc010075000
- [ 3.095030] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 3.095254] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 3.095547] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
- [ 3.095762] Init: Port Power? op_state=1
- [ 3.095891] Init: Power Port (0)
- [ 3.096510] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
- [ 3.103981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.111393] usb usb1: Product: DWC OTG Controller
- [ 3.118769] usb usb1: Manufacturer: Linux 5.10.63-v8 dwc_otg_hcd
- [ 3.126282] usb usb1: SerialNumber: 3f980000.usb
- [ 3.134827] hub 1-0:1.0: USB hub found
- [ 3.142331] hub 1-0:1.0: 1 port detected
- [ 3.151295] dwc_otg: FIQ enabled
- [ 3.151315] dwc_otg: NAK holdoff enabled
- [ 3.151329] dwc_otg: FIQ split-transaction FSM enabled
- [ 3.151352] Module dwc_common_port init
- [ 3.152290] usbcore: registered new interface driver usb-storage
- [ 3.161977] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
- [ 3.173365] sdhci: Secure Digital Host Controller Interface driver
- [ 3.180776] sdhci: Copyright(c) Pierre Ossman
- [ 3.188925] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
- [ 3.197254] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
- [ 3.205063] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.214858] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.223010] hid: raw HID events driver (C) Jiri Kosina
- [ 3.230782] usbcore: registered new interface driver usbhid
- [ 3.238245] usbhid: USB HID core driver
- [ 3.246155] ashmem: initialized
- [ 3.261407] Initializing XFRM netlink socket
- [ 3.265806] Indeed it is in host mode hprt0 = 00021501
- [ 3.269015] NET: Registered protocol family 17
- [ 3.283768] Key type dns_resolver registered
- [ 3.291896] registered taskstats version 1
- [ 3.299227] Loading compiled-in X.509 certificates
- [ 3.307389] Key type ._fscrypt registered
- [ 3.314608] Key type .fscrypt registered
- [ 3.321714] Key type fscrypt-provisioning registered
- [ 3.348773] uart-pl011 3f201000.serial: cts_event_workaround enabled
- [ 3.356095] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
- [ 3.366914] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
- [ 3.376767] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
- [ 3.384052] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
- [ 3.418444] sdhost: log_buf @ (____ptrval____) (c2b3f000)
- [ 3.446106] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 3.449571] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.461024] Indeed it is in host mode hprt0 = 00001101
- [ 3.469506] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 3.478675] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 3.489071] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 3.496279] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 3.508760] of_cfs_init
- [ 3.516086] of_cfs_init: OK
- [ 3.525195] Waiting for root device /dev/mmcblk0p3...
- [ 3.566286] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 3.576908] mmc0: new high speed SDHC card at address 0001
- [ 3.586234] mmcblk0: mmc0:0001 SD32G 29.1 GiB
- [ 3.597856] mmcblk0: p1 p2 p3
- [ 3.627963] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.635365] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
- [ 3.652546] devtmpfs: mounted
- [ 3.660465] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
- [ 3.667931] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.677046] hub 1-1:1.0: USB hub found
- [ 3.681752] Freeing unused kernel memory: 3392K
- [ 3.685009] hub 1-1:1.0: 5 ports detected
- [ 3.692291] Run /sbin/init as init process
- [ 3.706673] with arguments:
- [ 3.706689] /sbin/init
- [ 3.706795] with environment:
- [ 3.706810] HOME=/
- [ 3.706861] TERM=linux
- [ 3.732559] mmc1: new high speed SDIO card at address 0001
- [ 3.989585] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 4.086124] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
- [ 4.093674] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.104769] smsc95xx v2.0.0
- [ 4.286354] libphy: smsc95xx-mdiobus: probed
- [ 4.295253] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:bd:85:aa
- [ 4.379593] usb 1-1.4: new low-speed USB device number 4 using dwc_otg
- [ 4.484454] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0752, bcdDevice= 3.00
- [ 4.492578] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.500807] usb 1-1.4: Product: Wired Keyboard 400
- [ 4.508677] usb 1-1.4: Manufacturer: Microsoft
- [ 4.529561] input: Microsoft Wired Keyboard 400 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0752.0001/input/input0
- [ 4.591072] hid-generic 0003:045E:0752.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-3f980000.usb-1.4/input0
- [ 4.638284] random: crng init done
- [ 13.564087] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.571363] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
- [ 13.571399] [vc_sm_connected_init]: start
- [ 13.579884] mc: Linux media interface: v0.10
- [ 13.591039] [vc_sm_connected_init]: installed successfully
- [ 13.641053] videodev: Linux video capture interface: v2.00
- [ 13.736151] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.744900] bcm2835_audio bcm2835_audio: card created with 4 channels
- [ 13.752403] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.752412] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.754145] bcm2835_audio bcm2835_audio: card created with 4 channels
- [ 13.786805] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.791486] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.791788] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
- [ 13.810284] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
- [ 13.810362] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
- [ 13.823406] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
- [ 13.823564] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
- [ 13.829581] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
- [ 13.830362] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
- [ 13.830435] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
- [ 13.831990] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
- [ 13.832732] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
- [ 13.833775] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
- [ 13.833826] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
- [ 13.833856] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
- [ 13.833883] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
- [ 13.833909] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
- [ 13.834295] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
- [ 13.843285] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
- [ 13.843363] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
- [ 14.136568] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 14.218445] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 14.218780] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 14.218810] cfg80211: failed to load regulatory.db
- [ 14.424906] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
- [ 14.425115] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
- [ 14.449302] usbcore: registered new interface driver brcmfmac
- [ 15.435668] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
- [ 15.713742] Under-voltage detected! (0x00050005)
- [ 16.658622] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
- [ 17.485564] Adding 2097148k swap on /dev/mmcblk0p2. Priority:-2 extents:1 across:2097148k SSFS
- [ 22.923946] NET: Registered protocol family 10
- [ 22.926603] Segment Routing with IPv6
- [ 23.381280] 8021q: 802.1Q VLAN Support v1.8
- [ 23.657364] SMSC LAN8700 usb-001:003:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=usb-001:003:01, irq=POLL)
- [ 23.658267] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 23.675392] smsc95xx 1-1.1:1.0 eth0: Link is Down
- [ 25.763798] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
- [ 25.763902] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 30.540629] uart-pl011 3f201000.serial: no DMA platform data
- [ 38.241631] Voltage normalised (0x00000000)
- [ 44.385645] Under-voltage detected! (0x00050005)
- [ 48.481655] Voltage normalised (0x00000000)
- [ 105.826204] Under-voltage detected! (0x00050005)
- [ 111.970182] Voltage normalised (0x00000000)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement