Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- here is smartctl output for sdc, sdb & sda in this order.
- root@rescue ~ # smartctl --all /dev/sdc
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: ST_M13FQBL
- Serial Number: QNR_BFW
- Firmware Version: 1117F38F
- User Capacity: 4,142,054,400 bytes [4.14 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 6
- ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
- Local Time is: Mon Nov 18 14:42:22 2013 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Error SMART Values Read failed: scsi error aborted command
- Smartctl: SMART Read Values failed.
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: UNKNOWN!
- SMART Status, Attributes and Thresholds cannot be read.
- Error SMART Error Log Read failed: scsi error aborted command
- Smartctl: SMART Error Log Read Failed
- Error SMART Error Self-Test Log Read failed: scsi error aborted command
- Smartctl: SMART Self Test Log Read Failed
- Device does not support Selective Self Tests/Logging
- root@rescue ~ # smartctl --all /dev/sdb
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.11
- Device Model: ST31500341AS
- Serial Number: 9VS48G74
- LU WWN Device Id: 5 000c50 026b5ba18
- Firmware Version: CC1H
- User Capacity: 1,500,301,910,016 bytes [1.50 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Mon Nov 18 14:42:28 2013 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 617) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 87196730
- 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15
- 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 60
- 7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 1007030093
- 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 27148
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 15
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
- 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 274882101315
- 189 High_Fly_Writes 0x003a 021 021 000 Old_age Always - 79
- 190 Airflow_Temperature_Cel 0x0022 062 052 045 Old_age Always - 38 (Min/Max 38/38)
- 194 Temperature_Celsius 0x0022 038 048 000 Old_age Always - 38 (0 22 0 0)
- 195 Hardware_ECC_Recovered 0x001a 042 036 000 Old_age Always - 87196730
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 213021787974155
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4170770584
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1652554606
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- root@rescue ~ # smartctl --all /dev/sda
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.10.16] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Barracuda 7200.11
- Device Model: ST31500341AS
- Serial Number: 9VS49LPR
- LU WWN Device Id: 5 000c50 026c5211f
- Firmware Version: CC1H
- User Capacity: 1,500,301,910,016 bytes [1.50 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 4
- Local Time is: Mon Nov 18 14:42:36 2013 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- See vendor-specific Attribute list for failed Attributes.
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 609) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 105 087 006 Pre-fail Always - 187486275
- 3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 8
- 5 Reallocated_Sector_Ct 0x0033 001 001 036 Pre-fail Always FAILING_NOW 4095
- 7 Seek_Error_Rate 0x000f 086 057 030 Pre-fail Always - 9457085579
- 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 27078
- 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 8
- 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
- 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 400
- 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 420913217663
- 189 High_Fly_Writes 0x003a 028 028 000 Old_age Always - 72
- 190 Airflow_Temperature_Cel 0x0022 063 046 045 Old_age Always - 37 (Min/Max 26/37)
- 194 Temperature_Celsius 0x0022 037 054 000 Old_age Always - 37 (0 24 0 0)
- 195 Hardware_ECC_Recovered 0x001a 044 038 000 Old_age Always - 187486275
- 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
- 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 20328080239046
- 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3230313850
- 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 535643002
- SMART Error Log Version: 1
- ATA Error Count: 224 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 224 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 71 04 9d 00 32 e0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 01 00 00 00 a0 00 11d+08:50:46.614 IDENTIFY DEVICE
- ff 00 00 00 00 00 00 00 11d+08:50:46.575 [VENDOR SPECIFIC]
- 00 00 00 00 00 00 00 ff 11d+08:50:46.575 NOP [Abort queued commands]
- ff 00 00 00 00 00 00 00 11d+08:50:44.093 [VENDOR SPECIFIC]
- 00 00 00 00 00 00 00 ff 11d+08:50:44.093 NOP [Abort queued commands]
- Error 223 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- a1 00 00 00 00 00 a0 00 11d+07:56:37.110 IDENTIFY PACKET DEVICE
- ec 00 00 00 00 00 a0 00 11d+07:56:37.103 IDENTIFY DEVICE
- ff 00 00 00 00 00 00 00 11d+07:56:36.774 [VENDOR SPECIFIC]
- 00 00 00 00 00 00 00 ff 11d+07:56:36.773 NOP [Abort queued commands]
- a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE
- Error 222 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 71 04 9d 00 32 e0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 a0 00 11d+07:56:37.103 IDENTIFY DEVICE
- ff 00 00 00 00 00 00 00 11d+07:56:36.774 [VENDOR SPECIFIC]
- 00 00 00 00 00 00 00 ff 11d+07:56:36.773 NOP [Abort queued commands]
- a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE
- ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE
- Error 221 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 71 04 9d 00 32 e0 Device Fault; Error: ABRT
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- a1 00 00 00 00 00 a0 00 11d+07:56:31.758 IDENTIFY PACKET DEVICE
- ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE
- ff 00 00 00 00 00 00 00 11d+07:56:31.432 [VENDOR SPECIFIC]
- 00 00 00 00 00 00 00 ff 11d+07:56:31.432 NOP [Abort queued commands]
- a1 00 00 00 00 00 a0 00 11d+07:56:31.353 IDENTIFY PACKET DEVICE
- Error 220 occurred at disk power-on lifetime: 27073 hours (1128 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 04 71 04 9d 00 32 e0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- ec 00 00 00 00 00 a0 00 11d+07:56:31.751 IDENTIFY DEVICE
- ff 00 00 00 00 00 00 00 11d+07:56:31.432 [VENDOR SPECIFIC]
- 00 00 00 00 00 00 00 ff 11d+07:56:31.432 NOP [Abort queued commands]
- a1 00 00 00 00 00 a0 00 11d+07:56:31.353 IDENTIFY PACKET DEVICE
- ec 00 00 00 00 00 a0 00 11d+07:56:31.346 IDENTIFY DEVICE
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement