SHARE
TWEET

vsftpd

Techn9ne1730 Jun 21st, 2012 14 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # Example config file /etc/vsftpd.conf
  2. #
  3. # The default compiled in settings are fairly paranoid. This sample file
  4. # loosens things up a bit, to make the ftp daemon more usable.
  5. # Please see vsftpd.conf.5 for all compiled in defaults.
  6. #
  7. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
  8. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
  9. # capabilities.
  10. #
  11. #
  12. # Run standalone?  vsftpd can run either from an inetd or as a standalone
  13. # daemon started from an initscript.
  14. listen=YES
  15. listen_port=XXXXX
  16. #
  17. # Run standalone with IPv6?
  18. # Like the listen parameter, except vsftpd will listen on an IPv6 socket
  19. # instead of an IPv4 one. This parameter and the listen parameter are mutually
  20. # exclusive.
  21. #listen_ipv6=YES
  22. #
  23. # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
  24. anonymous_enable=NO
  25. #
  26. # Uncomment this to allow local users to log in.
  27. local_enable=YES
  28. #
  29. # Uncomment this to enable any form of FTP write command.
  30. write_enable=YES
  31. #
  32. # Default umask for local users is 077. You may wish to change this to 022,
  33. # if your users expect that (022 is used by most other ftpd's)
  34. #local_umask=022
  35. #
  36. # Uncomment this to allow the anonymous FTP user to upload files. This only
  37. # has an effect if the above global write enable is activated. Also, you will
  38. # obviously need to create a directory writable by the FTP user.
  39. #anon_upload_enable=YES
  40. #
  41. # Uncomment this if you want the anonymous FTP user to be able to create
  42. # new directories.
  43. #anon_mkdir_write_enable=YES
  44. #
  45. # Activate directory messages - messages given to remote users when they
  46. # go into a certain directory.
  47. dirmessage_enable=YES
  48. #
  49. # If enabled, vsftpd will display directory listings with the time
  50. # in  your  local  time  zone.  The default is to display GMT. The
  51. # times returned by the MDTM FTP command are also affected by this
  52. # option.
  53. use_localtime=YES
  54. #
  55. # Activate logging of uploads/downloads.
  56. xferlog_enable=YES
  57. #
  58. # Make sure PORT transfer connections originate from port 20 (ftp-data).
  59. connect_from_port_20=YES
  60. #
  61. # If you want, you can arrange for uploaded anonymous files to be owned by
  62. # a different user. Note! Using "root" for uploaded files is not
  63. # recommended!
  64. #chown_uploads=YES
  65. #chown_username=whoever
  66. #
  67. # You may override where the log file goes if you like. The default is shown
  68. # below.
  69. #xferlog_file=/var/log/vsftpd.log
  70. #
  71. # If you want, you can have your log file in standard ftpd xferlog format.
  72. # Note that the default log file location is /var/log/xferlog in this case.
  73. #xferlog_std_format=YES
  74. #
  75. # You may change the default value for timing out an idle session.
  76. idle_session_timeout=600
  77. #
  78. # You may change the default value for timing out a data connection.
  79. data_connection_timeout=120
  80. #
  81. # It is recommended that you define on your system a unique user which the
  82. # ftp server can use as a totally isolated and unprivileged user.
  83. nopriv_user=ftpsecure
  84. #
  85. # Enable this and the server will recognise asynchronous ABOR requests. Not
  86. # recommended for security (the code is non-trivial). Not enabling it,
  87. # however, may confuse older FTP clients.
  88. #async_abor_enable=YES
  89. #
  90. # By default the server will pretend to allow ASCII mode but in fact ignore
  91. # the request. Turn on the below options to have the server actually do ASCII
  92. # mangling on files when in ASCII mode.
  93. # Beware that on some FTP servers, ASCII support allows a denial of service
  94. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
  95. # predicted this attack and has always been safe, reporting the size of the
  96. # raw file.
  97. # ASCII mangling is a horrible feature of the protocol.
  98. #ascii_upload_enable=YES
  99. #ascii_download_enable=YES
  100. #
  101. # You may fully customise the login banner string:
  102. ftpd_banner=Welcome to the matrix!
  103. #
  104. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
  105. # useful for combatting certain DoS attacks.
  106. #deny_email_enable=YES
  107. # (default follows)
  108. #banned_email_file=/etc/vsftpd.banned_emails
  109. #
  110. # You may restrict local users to their home directories.  See the FAQ for
  111. # the possible risks in this before using chroot_local_user or
  112. # chroot_list_enable below.
  113. #chroot_local_user=YES
  114. #
  115. # You may specify an explicit list of local users to chroot() to their home
  116. # directory. If chroot_local_user is YES, then this list becomes a list of
  117. # users to NOT chroot().
  118. # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
  119. # the user does not have write access to the top level directory within the
  120. # chroot)
  121. #chroot_local_user=YES
  122. #chroot_list_enable=YES
  123. # (default follows)
  124. #chroot_list_file=/etc/vsftpd.chroot_list
  125. #
  126. # You may activate the "-R" option to the builtin ls. This is disabled by
  127. # default to avoid remote users being able to cause excessive I/O on large
  128. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
  129. # the presence of the "-R" option, so there is a strong case for enabling it.
  130. #ls_recurse_enable=YES
  131. #
  132. # Customization
  133. #
  134. # Some of vsftpd's settings don't fit the filesystem layout by
  135. # default.
  136. #
  137. # This option should be the name of a directory which is empty.  Also, the
  138. # directory should not be writable by the ftp user. This directory is used
  139. # as a secure chroot() jail at times vsftpd does not require filesystem
  140. # access.
  141. secure_chroot_dir=/var/run/vsftpd/empty
  142. #
  143. # This string is the name of the PAM service vsftpd will use.
  144. pam_service_name=vsftpd
  145. #
  146. # This option specifies the location of the RSA certificate to use for SSL
  147. # encrypted connections.
  148. rsa_cert_file=/etc/ssl/private/vsftpd.pem
RAW Paste Data
Top