Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- trubinoff@crunchbang:~$ sudo sensors-detect
- # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
- # System: Intel Corporation Corbett Park
- # Board: Intel Corporation Corbett Park CRB
- This program will help you determine which kernel modules you need
- to load to use lm_sensors most effectively. It is generally safe
- and recommended to accept the default answers to all questions,
- unless you know what you're doing.
- Some south bridges, CPUs or memory controllers contain embedded sensors.
- Do you want to scan for them? This is totally safe. (YES/no): y
- Silicon Integrated Systems SIS5595... No
- VIA VT82C686 Integrated Sensors... No
- VIA VT8231 Integrated Sensors... No
- AMD K8 thermal sensors... No
- AMD Family 10h thermal sensors... No
- AMD Family 11h thermal sensors... No
- Intel Core family thermal sensor... No
- Intel Atom thermal sensor... Success!
- (driver `coretemp')
- Intel AMB FB-DIMM thermal sensor... No
- VIA C7 thermal sensor... No
- VIA Nano thermal sensor... No
- Some Super I/O chips contain embedded sensors. We have to write to
- standard I/O ports to probe them. This is usually safe.
- Do you want to scan for Super I/O sensors? (YES/no): y
- Probing for Super-I/O at 0x2e/0x2f
- Trying family `National Semiconductor'... Yes
- Found unknown chip with ID 0xfc11
- Probing for Super-I/O at 0x4e/0x4f
- Trying family `National Semiconductor'... No
- Trying family `SMSC'... No
- Trying family `VIA/Winbond/Nuvoton/Fintek'... No
- Trying family `ITE'... No
- Some systems (mainly servers) implement IPMI, a set of common interfaces
- through which system health data may be retrieved, amongst other things.
- We first try to get the information from SMBIOS. If we don't find it
- there, we have to read from arbitrary I/O ports to probe for such
- interfaces. This is normally safe. Do you want to scan for IPMI
- interfaces? (YES/no): y
- Probing for `IPMI BMC KCS' at 0xca0... No
- Probing for `IPMI BMC SMIC' at 0xca8... No
- Some hardware monitoring chips are accessible through the ISA I/O ports.
- We have to write to arbitrary I/O ports to probe them. This is usually
- safe though. Yes, you do have ISA I/O ports even if you do not have any
- ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
- Probing for `National Semiconductor LM78' at 0x290... No
- Probing for `National Semiconductor LM79' at 0x290... No
- Probing for `Winbond W83781D' at 0x290... No
- Probing for `Winbond W83782D' at 0x290... No
- Lastly, we can probe the I2C/SMBus adapters for connected hardware
- monitoring devices. This is the most risky part, and while it works
- reasonably well on most systems, it has been reported to cause trouble
- on some systems.
- Do you want to probe the I2C/SMBus adapters now? (YES/no): y
- Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801G ICH7
- Module i2c-dev loaded successfully.
- Next adapter: SMBus I801 adapter at 18a0 (i2c-0)
- Do you want to scan it? (YES/no/selectively): y
- Client found at address 0x50
- Probing for `Analog Devices ADM1033'... No
- Probing for `Analog Devices ADM1034'... No
- Probing for `SPD EEPROM'... No
- Probing for `EDID EEPROM'... No
- Next adapter: i915 gmbus disabled (i2c-1)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 gmbus ssc (i2c-2)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 GPIOB (i2c-3)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 gmbus vga (i2c-4)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 GPIOA (i2c-5)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 gmbus panel (i2c-6)
- Do you want to scan it? (YES/no/selectively): y
- Client found at address 0x50
- Probing for `Analog Devices ADM1033'... No
- Probing for `Analog Devices ADM1034'... No
- Probing for `SPD EEPROM'... No
- Probing for `EDID EEPROM'... Yes
- (confidence 8, not a hardware monitoring chip)
- Next adapter: i915 GPIOC (i2c-7)
- Do you want to scan it? (YES/no/selectively): y
- Client found at address 0x50
- Probing for `Analog Devices ADM1033'... No
- Probing for `Analog Devices ADM1034'... No
- Probing for `SPD EEPROM'... No
- Probing for `EDID EEPROM'... Yes
- (confidence 8, not a hardware monitoring chip)
- Next adapter: i915 gmbus dpc (i2c-8)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 GPIOD (i2c-9)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 gmbus dpb (i2c-10)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 GPIOE (i2c-11)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 gmbus reserved (i2c-12)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 gmbus dpd (i2c-13)
- Do you want to scan it? (YES/no/selectively): y
- Next adapter: i915 GPIOF (i2c-14)
- Do you want to scan it? (YES/no/selectively): y
- Now follows a summary of the probes I have just done.
- Just press ENTER to continue:
- Driver `coretemp':
- * Chip `Intel Atom thermal sensor' (confidence: 9)
- To load everything that is needed, add this to /etc/modules:
- #----cut here----
- # Chip drivers
- coretemp
- #----cut here----
- If you have some drivers built into your kernel, the list above will
- contain too many modules. Skip the appropriate ones!
- Do you want to add these lines automatically to /etc/modules? (yes/NO)y
- Successful!
- Monitoring programs won't work until the needed modules are
- loaded. You may want to run '/etc/init.d/module-init-tools start'
- to load them.
- Unloading i2c-dev... OK
- trubinoff@crunchbang:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement