API tools faq
paste
igorkrnic

Untitled

igorkrnic
Dec 28th, 2013
84
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.89 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.7.0-kgb-v1] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Hitachi Deskstar 7K2000
  6. Device Model: Hitachi HDS722020ALA330
  7. Serial Number: JK1170YAGWLLTP
  8. LU WWN Device Id: 5 000cca 221cc8bdd
  9. Firmware Version: JKAOA20N
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: ATA-8-ACS revision 4
  15. Local Time is: Sat Dec 28 11:32:49 2013 CET
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x84) Offline data collection activity
  24. was suspended by an interrupting command from host.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: (21889) seconds.
  31. Offline data collection
  32. capabilities: (0x5b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. No Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 1) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 255) minutes.
  49. SCT capabilities: (0x003d) SCT Status supported.
  50. SCT Error Recovery Control supported.
  51. SCT Feature Control supported.
  52. SCT Data Table supported.
  53.  
  54. SMART Attributes Data Structure revision number: 16
  55. Vendor Specific SMART Attributes with Thresholds:
  56. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  57. 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 65536
  58. 2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 106
  59. 3 Spin_Up_Time 0x0007 124 124 024 Pre-fail Always - 612 (Average 555)
  60. 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 152
  61. 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 2
  62. 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
  63. 8 Seek_Time_Performance 0x0005 116 116 020 Pre-fail Offline - 37
  64. 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 18406
  65. 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 152
  67. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 365
  68. 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 365
  69. 194 Temperature_Celsius 0x0002 146 146 000 Old_age Always - 41 (Min/Max 18/55)
  70. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
  71. 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
  72. 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
  73. 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
  74.  
  75. SMART Error Log Version: 1
  76. ATA Error Count: 36 (device log contains only the most recent five errors)
  77. CR = Command Register [HEX]
  78. FR = Features Register [HEX]
  79. SC = Sector Count Register [HEX]
  80. SN = Sector Number Register [HEX]
  81. CL = Cylinder Low Register [HEX]
  82. CH = Cylinder High Register [HEX]
  83. DH = Device/Head Register [HEX]
  84. DC = Device Command Register [HEX]
  85. ER = Error register [HEX]
  86. ST = Status register [HEX]
  87. Powered_Up_Time is measured from power on, and printed as
  88. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  89. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  90.  
  91. Error 36 occurred at disk power-on lifetime: 987 hours (41 days + 3 hours)
  92. When the command that caused the error occurred, the device was active or idle.
  93.  
  94. After command completion occurred, registers were:
  95. ER ST SC SN CL CH DH
  96. -- -- -- -- -- -- --
  97. 40 51 10 73 3b b2 00 Error: UNC at LBA = 0x00b23b73 = 11680627
  98.  
  99. Commands leading to the command that caused the error were:
  100. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  101. -- -- -- -- -- -- -- -- ---------------- --------------------
  102. 60 00 30 3b 86 71 40 08 2d+13:06:41.883 READ FPDMA QUEUED
  103. 60 00 28 3b d2 2d 40 08 2d+13:06:41.883 READ FPDMA QUEUED
  104. 60 08 20 2b 2e 30 40 08 2d+13:06:41.883 READ FPDMA QUEUED
  105. 60 80 18 bb 2c 30 40 08 2d+13:06:41.883 READ FPDMA QUEUED
  106. 60 08 10 4b 2d 30 40 08 2d+13:06:41.882 READ FPDMA QUEUED
  107.  
  108. Error 35 occurred at disk power-on lifetime: 987 hours (41 days + 3 hours)
  109. When the command that caused the error occurred, the device was active or idle.
  110.  
  111. After command completion occurred, registers were:
  112. ER ST SC SN CL CH DH
  113. -- -- -- -- -- -- --
  114. 40 51 10 73 3b b2 00 Error: UNC at LBA = 0x00b23b73 = 11680627
  115.  
  116. Commands leading to the command that caused the error were:
  117. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  118. -- -- -- -- -- -- -- -- ---------------- --------------------
  119. 60 08 18 5b 2d 30 40 08 2d+13:06:24.949 READ FPDMA QUEUED
  120. 60 08 10 4b 2d 30 40 08 2d+13:06:24.948 READ FPDMA QUEUED
  121. 60 80 08 bb 2c 30 40 08 2d+13:06:24.841 READ FPDMA QUEUED
  122. 60 08 00 2b 2e 30 40 08 2d+13:06:24.840 READ FPDMA QUEUED
  123. 60 20 20 63 3b b2 40 08 2d+13:06:24.743 READ FPDMA QUEUED
  124.  
  125. Error 34 occurred at disk power-on lifetime: 987 hours (41 days + 3 hours)
  126. When the command that caused the error occurred, the device was active or idle.
  127.  
  128. After command completion occurred, registers were:
  129. ER ST SC SN CL CH DH
  130. -- -- -- -- -- -- --
  131. 40 51 10 73 3b b2 00 Error: UNC at LBA = 0x00b23b73 = 11680627
  132.  
  133. Commands leading to the command that caused the error were:
  134. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  135. -- -- -- -- -- -- -- -- ---------------- --------------------
  136. 60 18 20 a3 3b 30 40 08 2d+13:06:07.807 READ FPDMA QUEUED
  137. 60 08 18 4b 3b 30 40 08 2d+13:06:07.807 READ FPDMA QUEUED
  138. 60 48 10 f3 3a 30 40 08 2d+13:06:07.806 READ FPDMA QUEUED
  139. 60 08 08 db 3a 30 40 08 2d+13:06:07.806 READ FPDMA QUEUED
  140. 60 20 00 63 3b b2 40 08 2d+13:06:07.805 READ FPDMA QUEUED
  141.  
  142. Error 33 occurred at disk power-on lifetime: 987 hours (41 days + 3 hours)
  143. When the command that caused the error occurred, the device was active or idle.
  144.  
  145. After command completion occurred, registers were:
  146. ER ST SC SN CL CH DH
  147. -- -- -- -- -- -- --
  148. 40 51 10 73 3b b2 00 Error: UNC at LBA = 0x00b23b73 = 11680627
  149.  
  150. Commands leading to the command that caused the error were:
  151. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  152. -- -- -- -- -- -- -- -- ---------------- --------------------
  153. 60 08 00 db 3a 30 40 08 2d+13:05:50.881 READ FPDMA QUEUED
  154. 60 20 18 63 3b b2 40 08 2d+13:05:50.665 READ FPDMA QUEUED
  155. 60 08 10 3b 3a 30 40 08 2d+13:05:50.665 READ FPDMA QUEUED
  156. 60 10 08 5b 3a 30 40 08 2d+13:05:50.664 READ FPDMA QUEUED
  157. 60 48 00 73 3a 30 40 08 2d+13:05:50.664 READ FPDMA QUEUED
  158.  
  159. Error 32 occurred at disk power-on lifetime: 987 hours (41 days + 3 hours)
  160. When the command that caused the error occurred, the device was active or idle.
  161.  
  162. After command completion occurred, registers were:
  163. ER ST SC SN CL CH DH
  164. -- -- -- -- -- -- --
  165. 40 51 10 73 3b b2 00 Error: UNC at LBA = 0x00b23b73 = 11680627
  166.  
  167. Commands leading to the command that caused the error were:
  168. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  169. -- -- -- -- -- -- -- -- ---------------- --------------------
  170. 60 48 20 73 3a 30 40 08 2d+13:05:33.627 READ FPDMA QUEUED
  171. 60 10 18 5b 3a 30 40 08 2d+13:05:33.627 READ FPDMA QUEUED
  172. 60 08 10 3b 3a 30 40 08 2d+13:05:33.626 READ FPDMA QUEUED
  173. 60 20 08 63 3b b2 40 08 2d+13:05:33.626 READ FPDMA QUEUED
  174. 60 28 00 0b 3a 30 40 08 2d+13:05:33.625 READ FPDMA QUEUED
  175.  
  176. SMART Self-test log structure revision number 1
  177. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  178.  
  179.  
  180. SMART Selective self-test log data structure revision number 1
  181. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  182. 1 0 0 Not_testing
  183. 2 0 0 Not_testing
  184. 3 0 0 Not_testing
  185. 4 0 0 Not_testing
  186. 5 0 0 Not_testing
  187. Selective self-test flags (0x0):
  188. After scanning selected spans, do NOT read-scan remainder of disk.
  189. If Selective self-test is pending on power-up, resume after 0 minute delay.
  190.  
  191. root@o190:~#
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!