Changing monitoring state from "Offline" to "Detecting serial port"

Serial port list: ['/dev/ttyUSB0']

Connecting to: /dev/ttyUSB0
Changing monitoring state from "Detecting serial port" to "Opening serial port"
Connected to: Serial<id=0x6bf10690, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N',
stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from "Opening serial port" to "Connecting"

Send: N0 M110 N0*125
start

Send: N0 M110 N0*125
External Reset
Marlin 1.0.0

Last Updated: Mar 28 2018 09:11:38 | Author: (Ender3)

Compiled: Mar 28 2018

Free Memory: 9697  PlannerBufferBytes: 1232
Hardcoded Default Settings Loaded

Steps per unit:
 M92 X80.00 Y80.00 Z400.00 E93.00

Maximum feedrates (mm/s):
 M203 X500.00 Y500.00 Z5.00 E25.00

Maximum Acceleration (mm/s2):
 M201 X500 Y500 Z100 E5000

Acceleration: S=acceleration, T=retract acceleration
 M204 S500.00 T500.00

Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms),
X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
 M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

Home offset (mm):
 M206 X0.00 Y0.00 Z0.00

PID settings:
  M301 P21.73 I1.54 D76.55

SD card ok
Init power off infomation.

size:
591

init valid:
0
0

Changing monitoring state from "Connecting" to "Operational"

Send: N0 M110 N0*125

Send: N1 M115*39
FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com
PROTOCOL_VERSION:1.0 MACHINE_TYPE:www.creality3d.cn EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000

Send: M20
Begin file list
/47ACB~1.MOD/TEST/TEST-D~1.GCO
TEST-D~1.GCO
End file list

Send: M115
FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com
PROTOCOL_VERSION:1.0 MACHINE_TYPE:www.creality3d.cn EXTRUDER_COUNT:1 UUID:00000000-0000-0000-0000-000000000000

Send: M504

Send: M501
Hardcoded Default Settings Loaded

Steps per unit:
 M92 X80.00 Y80.00 Z400.00 E93.00

Maximum feedrates (mm/s):
 M203 X500.00 Y500.00 Z5.00 E25.00

Maximum Acceleration (mm/s2):
 M201 X500 Y500 Z100 E5000

Acceleration: S=acceleration, T=retract acceleration
 M204 S500.00 T500.00
Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms),
X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
 M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00

Home offset (mm):
 M206 X0.00 Y0.00 Z0.00

PID settings:
  M301 P21.73 I1.54 D76.55