Bullet64

spi_flash_rockpro64

Aug 7th, 2018
206
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. Willkommen zu minicom 2.7
  3.  
  4. Optionen: I18n
  5. Übersetzt am Apr 22 2017, 09:14:19.
  6. Port /dev/ttyUSB0, 16:31:12
  7.  
  8. Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
  9. DDR Version 1.13 20180801
  10. In
  11. Channel 0: LPDDR4,50MHz
  12. CS = 0
  13. MR0=0x98
  14. MR4=0x2
  15. MR5=0xFF
  16. MR8=0x8
  17. MR12=0x4D
  18. MR14=0x4D
  19. MR18=0x0
  20. MR19=0x0
  21. MR24=0x8
  22. MR25=0x0
  23. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  24. Channel 1: LPDDR4,50MHz
  25. CS = 0
  26. MR0=0x98
  27. MR4=0x2
  28. MR5=0xFF
  29. MR8=0x8
  30. MR12=0x4D
  31. MR14=0x4D
  32. MR18=0x0
  33. MR19=0x0
  34. MR24=0x8
  35. MR25=0x0
  36. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  37. 256B stride
  38. channel 0
  39. CS = 0
  40. MR0=0x98
  41. MR4=0x2
  42. MR5=0xFF
  43. MR8=0x8
  44. MR12=0x72
  45. MR14=0x72
  46. MR18=0x0
  47. MR19=0x0
  48. MR24=0x8
  49. MR25=0x0
  50. channel 1
  51. CS = 0
  52. MR0=0x98
  53. MR4=0x2
  54. MR5=0xFF
  55. MR8=0x8
  56. MR12=0x72
  57. MR14=0x72
  58. MR18=0x0
  59. MR19=0x0
  60. MR24=0x8
  61. MR25=0x0
  62. channel 0 training pass!
  63. channel 1 training pass!
  64. change freq to 400MHz 0,1
  65. channel 0
  66. CS = 0
  67. MR0=0x98
  68. MR4=0x2
  69. MR5=0xFF
  70. MR8=0x8
  71. MR12=0x72
  72. MR14=0x72
  73. MR18=0x0
  74. MR19=0x0
  75. MR24=0x8
  76. MR25=0x0
  77. channel 1
  78. CS = 0
  79. MR0=0x98
  80. MR4=0x2
  81. MR5=0xFF
  82. MR8=0x8
  83. MR12=0x72
  84. MR14=0x72
  85. MR18=0x0
  86. MR19=0x0
  87. MR24=0x8
  88. MR25=0x0
  89. channel 0 training pass!
  90. channel 1 training pass!
  91. change freq to 800MHz 1,0
  92. ch 0 ddrconfig = 0x101, ddrsize = 0x20
  93. ch 1 ddrconfig = 0x101, ddrsize = 0x20
  94. pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
  95. OUT
  96. U-Boot SPL board init
  97.  
  98. U-Boot SPL 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:15)
  99. booted from SD
  100. Trying to boot from MMC2
  101. NOTICE: BL31: v1.3(debug):65aa5ce
  102. NOTICE: BL31: Built : 10:47:37, Jun 19 2018
  103. NOTICE: BL31: Rockchip release version: v1.1
  104. INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  105. INFO: Using opteed sec cpu_context!
  106. INFO: boot cpu mask: 0
  107. INFO: plat_rockchip_pmu_init(1151): pd status 3e
  108. INFO: BL31: Initializing runtime services
  109. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
  110. ERROR: Error initializing runtime service opteed_fast
  111. INFO: BL31: Preparing for EL3 exit to normal world
  112. INFO: Entry point address = 0x200000
  113. INFO: SPSR = 0x3c9
  114.  
  115.  
  116. U-Boot 2017.09-rockchip-ayufan-1033-gdf02018479 (Aug 06 2018 - 22:29:23 +0000)
  117.  
  118. Model: Pine64 RockPro64
  119. DRAM: 2 GiB
  120. DCDC_REG1@vdd_center: ; enabling
  121. DCDC_REG2@vdd_cpu_l: ; enabling
  122. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  123. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  124. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  125. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  126. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  127. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  128. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  129. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  130. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  131. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  132. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  133. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  134. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  135. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  136. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  137. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  138. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  139. vdd-log@vdd_log: ; enabling (ret: -38)
  140. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  141. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  142. *** Warning - bad CRC, using default environment
  143.  
  144. In: serial@ff1a0000
  145. Out: serial@ff1a0000
  146. Err: serial@ff1a0000
  147. Model: Pine64 RockPro64
  148. Net: eth0: ethernet@fe300000
  149. Hit any key to stop autoboot: 0
  150. Card did not respond to voltage select!
  151. mmc_init: -95, time 20
  152. switch to partitions #0, OK
  153. mmc1 is current device
  154. Scanning mmc 1:2...
  155. Found U-Boot script /boot.scr
  156. reading /boot.scr
  157. 827 bytes read in 2 ms (403.3 KiB/s)
  158. ## Executing script at 00500000
  159. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  160. reading rkspi_loader.img
  161. 1460204 bytes read in 156 ms (8.9 MiB/s)
  162. SF: 4194304 bytes @ 0x0 Erased: OK
  163. device 0 offset 0x0, size 0x1647ec
  164. SF: 1460204 bytes @ 0x0 Written: OK
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×