DDR version 1.13 20180428
ID:0xFFF
In
LPDDR3
786MHz
Bus Width=32 Col=11 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=4096MB
ddrconfig:7
OUT

U-Boot SPL 2017.09-rockchip-ayufan-1065-g95f6152134 (Aug 26 2019 - 12:40:32)
board_init_sdmmc_pwr_en
setup_ddr_param  1
booted from SD
Trying to boot from MMC2
NOTICE:  BL31: v1.3(debug):9d3f591
NOTICE:  BL31: Built : 14:39:02, Jan 17 2018
NOTICE:  BL31:Rockchip release version: v1.3
INFO:    ARM GICv2 driver initialized
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 1
INFO:    plat_rockchip_pmu_init: pd status 0xe
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-rockchip-ayufan-1065-g95f6152134 (Aug 26 2019 - 12:41:04 +0000)

Model: Pine64 Rock64
DRAM:  4 GiB
MMC:   rksdmmc@ff520000: 0, rksdmmc@ff500000: 1
SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: Pine64 Rock64
misc_init_r
cpuid=55524b503039303231000000000f222c
serial=556d7db57902d0a
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:2...
Found U-Boot script /boot.scr
reading /boot.scr
832 bytes read in 2 ms (406.3 KiB/s)
## Executing script at 00500000
LED 'power' operation failed (err=-121)
LED 'power' operation failed (err=-121)
SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
reading rksd_loader.img
1073080 bytes read in 50 ms (20.5 MiB/s)
LED 'power' operation failed (err=-121)
LED 'power' operation failed (err=-121)
SF: 4161536 bytes @ 0x8000 Erased: OK
LED 'power' operation failed (err=-121)
LED 'power' operation failed (err=-121)
device 0 offset 0x8000, size 0x105fb8
SF: 1073080 bytes @ 0x8000 Written: OK
LED 'power' operation failed (err=-121)
LED 'power' operation failed (err=-121)