API tools faq
paste
yakey1

Untitled

yakey1
Aug 20th, 2022
37
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 130.00 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Linux version 3.4.113-lineageos-gda48a34d7a3-dirty (eleventh@eleventh-ThinkPad) (gcc version 4.9 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Sat Aug 20 17:19:52 UTC 2022
  5. [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  7. [ 0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Samsung HLTE rev0.7
  8. [ 0.000000] setup_bootmode: boot_mode is 0
  9. [ 0.000000] qcom,ion-heap@16 reserved EBI1 size 1e00000
  10. [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
  11. [ 0.000000] qcom,mdss_fb_primary reserved EBI1 size 0
  12. [ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-4100000
  13. [ 0.000000] qcom,msm-rtb reserved EBI1 size 100000
  14. [ 0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
  15. [ 0.000000] Node qcom,msm-mem-hole removed memory 6c00000-10200000
  16. [ 0.000000] Initialized persistent memory from 7fa00000-7fafffff
  17. [ 0.000000] memory pool 3 (start 0xbd800000 size 2800000) initialized
  18. [ 0.000000] cma: CMA: reserved 16 MiB at 2b400000
  19. [ 0.000000] cma: Found secure_region, memory base 0, size 165 MiB, limit 0xffffffff
  20. [ 0.000000] cma: CMA: reserved 168 MiB at b3000000
  21. [ 0.000000] cma: Found adsp_region, memory base 0, size 65 MiB, limit 0xffffffff
  22. [ 0.000000] cma: CMA: reserved 68 MiB at aec00000
  23. [ 0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
  24. [ 0.000000] cma: CMA: reserved 20 MiB at ad800000
  25. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  26. [ 0.000000] IMEM DT static mapping successful
  27. [ 0.000000] On node 0 totalpages: 737792
  28. [ 0.000000] free_area_init_node: node 0, pgdat c1386fc0, node_mem_map c4100000
  29. [ 0.000000] Normal zone: 1416 pages used for memmap
  30. [ 0.000000] Normal zone: 0 pages reserved
  31. [ 0.000000] Normal zone: 141432 pages, LIFO batch:31
  32. [ 0.000000] HighMem zone: 4728 pages used for memmap
  33. [ 0.000000] HighMem zone: 590216 pages, LIFO batch:31
  34. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c595e000 s16064 r8192 d12608 u36864
  35. [ 0.000000] pcpu-alloc: s16064 r8192 d12608 u36864 alloc=9*4096
  36. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  37. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 731648
  38. [ 0.000000] Kernel command line: console=null androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x3F androidboot.bootdevice=msm_sdcc.1 androidboot.sec_atd.tty=/dev/ttyHSL0 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debug.reset_reason=0x1a2b3c00 lcd_id=0x404024 pmic_info=4 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=4d32d60ad89b8eb391642f33bfe6df31 connie=SM-N9005_OPEN_EUR_0a75bfcf6b478aed2514be8b442a46aa loglevel=4 samsung.hardware=SM-N9005 samsung.board_rev=8 androidboot.emmc_checksum=3 androidboot.warranty_bit=1 androidboot.bootloader=N9005XXSGBQE1 androidboot.nvdata_backup=0 androidboot.boot_recovery=0 uart_dbg=0 sec_debug.pm8941_rev=3 sec_debug.pm8841_rev=2 diag=0 vmalloc=450m level=0x574f4c44 androidboot.emmc=true androidboot.serialno=c3ba6045 androidboot.baseband=msm
  39. [ 0.000000] sec_dbg_setup: str=@0x10100008
  40. [ 0.000000] sec_dbg_setup: secdbg_paddr = 0x10100008
  41. [ 0.000000] sec_dbg_setup: secdbg_size = 0x80000
  42. [ 0.000000] get_lcd_id_cmdline: LCD_ID = 0x404024, lcd_attached =1
  43. [ 0.000000] synaptics_read_lcd_id: string is 404024, integer is 404024, ID2[0x04], system_rev is 8
  44. [ 0.000000] ../../../../../../kernel/samsung/msm8974/drivers/misc/max77803-muic.c get_if_pmic_inifo: switch_sel: 4 if_pmic_rev:0
  45. [ 0.000000] mdss_panel_current_hw_rev : 8
  46. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  49. [ 0.000000] allocated 6291456 bytes of page_cgroup
  50. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  51. [ 0.000000] Memory: 108MB 2774MB = 2882MB total
  52. [ 0.000000] Memory: 2598112k/2598112k available, 394016k reserved, 2116608K highmem
  53. [ 0.000000] Virtual kernel memory layout:
  54. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  55. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  56. [ 0.000000] vmalloc : 0xec800000 - 0xff000000 ( 296 MB)
  57. [ 0.000000] lowmem : 0xd0200000 - 0xec400000 ( 450 MB)
  58. [ 0.000000] vmalloc : 0xc6c00000 - 0xd0200000 ( 150 MB)
  59. [ 0.000000] lowmem : 0xc0000000 - 0xc6c00000 ( 108 MB)
  60. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  61. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  62. [ 0.000000] .text : 0xc0008000 - 0xc11440e4 (17649 kB)
  63. [ 0.000000] .init : 0xc1200000 - 0xc130fec0 (1088 kB)
  64. [ 0.000000] .data : 0xc1310000 - 0xc13bce90 ( 692 kB)
  65. [ 0.000000] .bss : 0xc142d9a0 - 0xc1ab314c (6678 kB)
  66. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  67. [ 0.000000] Preemptible hierarchical RCU implementation.
  68. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  69. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  70. [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
  71. [ 0.000000] Switching to timer-based delay loop
  72. [ 0.000000] Console: colour dummy device 80x30
  73. [ 0.000101] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  74. [ 0.000121] pid_max: default: 32768 minimum: 301
  75. [ 0.000256] Security Framework initialized
  76. [ 0.000284] SELinux: Initializing.
  77. [ 0.000341] SELinux: Starting in permissive mode
  78. [ 0.000394] Mount-cache hash table entries: 512
  79. [ 0.001094] Initializing cgroup subsys debug
  80. [ 0.001106] Initializing cgroup subsys cpuacct
  81. [ 0.001116] Initializing cgroup subsys memory
  82. [ 0.001148] Initializing cgroup subsys devices
  83. [ 0.001159] Initializing cgroup subsys freezer
  84. [ 0.001169] Initializing cgroup subsys net_cls
  85. [ 0.001179] Initializing cgroup subsys blkio
  86. [ 0.001204] Initializing cgroup subsys bfqio
  87. [ 0.001243] CPU: Testing write buffer coherency: ok
  88. [ 0.001424] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  89. [ 0.001486] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  90. [ 0.004318] Setting up static identity map for 0xba4f30 - 0xba4fb8
  91. [ 0.004333] MSM Memory Dump table set up
  92. [ 0.004345] set_dload_mode <1> ( c120fb2c )
  93. [ 0.005827] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  94. [ 0.006595] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  95. [ 0.007350] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  96. [ 0.007433] Brought up 4 CPUs
  97. [ 0.007447] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  98. [ 0.008441] devtmpfs: initialized
  99. [ 0.020469] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
  100. [ 0.020557] [suspend helper] suspend_helper_init: init done
  101. [ 0.020858] dummy:
  102. [ 0.032586] NET: Registered protocol family 16
  103. [ 0.036135] DMA: preallocated 256 KiB pool for atomic coherent allocations
  104. [ 0.038335] sec_debug_init: enable=0
  105. [ 0.038346] sec_debug_init:__raw_readl restart_reason=305419896
  106. [ 0.038356] sec_debug_init: restart_reason : 0xfa00a65c
  107. [ 0.038820] KPI: Bootloader start count = 27727
  108. [ 0.038829] KPI: Bootloader end count = 77716
  109. [ 0.038837] KPI: Bootloader display count = 59122
  110. [ 0.038845] KPI: Bootloader load kernel count = 1752
  111. [ 0.038855] KPI: Kernel MPM timestamp = 189394
  112. [ 0.038863] KPI: Kernel MPM Clock frequency = 32768
  113. [ 0.038879] socinfo_print: v8, id=126, ver=2.2, raw_id=1968, raw_ver=7, hw_plat=1, hw_plat_ver=65536
  114. [ 0.038886] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
  115. [ 0.039135] msm_8974_init_gpiomux:2701 socinfo_get_version 20002
  116. [ 0.039151] msm_gpiomux_install: write failure: status[-22] gpio[-1]
  117. [ 0.039161] msm_gpiomux_install: write failure: status[-22] gpio[-1]
  118. [ 0.039525] persistent_ram: found existing buffer, size 25128, start 25128
  119. [ 0.105477] console [ram-1] enabled
  120. [ 0.120125] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
  121. [ 0.139197] WDOG_V2 handled by TZ:dump @0xead85000 PA:2ad85000
  122. [ 0.139249] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
  123. [ 0.161529] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
  124. [ 0.161938] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
  125. [ 0.162333] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
  126. [ 0.162803] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
  127. [ 0.163191] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
  128. [ 0.163585] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
  129. [ 0.163987] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  130. [ 0.164398] 8841_s3: 1050 mV normal idle
  131. [ 0.164814] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
  132. [ 0.165192] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
  133. [ 0.165597] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
  134. [ 0.166011] 8941_s1: 1300 mV normal idle
  135. [ 0.166461] 8941_s2: 2150 mV normal idle
  136. [ 0.166873] 8941_s3: 1800 mV normal idle
  137. [ 0.167300] 8941_l1: 1200 mV normal idle
  138. [ 0.167718] 8941_l2: 1200 mV normal idle
  139. [ 0.168127] 8941_l3: 1050 <--> 1225 mV at 1050 mV normal idle
  140. [ 0.168553] 8941_l4: 1225 mV normal idle
  141. [ 0.168959] 8941_l5: 1800 mV normal idle
  142. [ 0.169420] 8941_l6: 1800 mV normal idle
  143. [ 0.169828] 8941_l7: 1800 mV normal idle
  144. [ 0.170245] 8941_l8: 1800 mV normal idle
  145. [ 0.170680] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
  146. [ 0.171099] 8941_l10: 1800 mV normal idle
  147. [ 0.171522] 8941_l11: 1200 <--> 1350 mV at 1300 mV normal idle
  148. [ 0.171932] 8941_l12: 1800 mV normal idle
  149. [ 0.172329] 8941_l12_ao: 1800 mV normal idle
  150. [ 0.172750] 8941_l13: 1800 <--> 3300 mV at 2950 mV normal idle
  151. [ 0.173205] 8941_l14: 1800 mV normal idle
  152. [ 0.173634] 8941_l15: 2050 mV normal idle
  153. [ 0.174071] 8941_l16: 2700 mV normal idle
  154. [ 0.174511] 8941_l17: 2850 <--> 3000 mV at 3000 mV normal idle
  155. [ 0.174939] 8941_l18: 2850 mV normal idle
  156. [ 0.175359] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
  157. [ 0.175768] 8941_l20: 2950 mV normal idle
  158. [ 0.176214] 8941_l21: 2950 mV normal idle
  159. [ 0.176629] 8941_l22: 2500 <--> 3000 mV at 2500 mV normal idle
  160. [ 0.177059] 8941_l23: 2400 <--> 3300 mV at 3000 mV normal idle
  161. [ 0.177482] 8941_l24: 3075 mV normal idle
  162. [ 0.177890] 8941_lvs1:
  163. [ 0.178262] 8941_lvs2:
  164. [ 0.178615] 8941_lvs3:
  165. [ 0.180945] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
  166. [ 0.180958] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
  167. [ 0.181254] krait0: 500 <--> 1100 mV at 900 mV fast normal idle
  168. [ 0.181711] krait1: 500 <--> 1100 mV at 900 mV fast normal idle
  169. [ 0.182173] krait2: 500 <--> 1100 mV at 900 mV fast normal idle
  170. [ 0.182624] krait3: 500 <--> 1100 mV at 900 mV fast normal idle
  171. [ 0.186957] edp_pixel_get_div: div=1
  172. [ 0.187000] edp_mainlink_get_rate: rate=0 div=5
  173. [ 0.187018] edp_mainlink_get_rate: rate=0 div=5
  174. [ 0.216295] msm-thermal qcom,msm-thermal.74: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
  175. [ 0.217438] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
  176. [ 0.217458] msm-thermal qcom,msm-thermal.74: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
  177. [ 0.217479] msm-thermal qcom,msm-thermal.74: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
  178. [ 0.217729] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  179. [ 0.218262] 8941_l18: Failed to create debugfs directory
  180. [ 0.218286] 8941_lvs1: Failed to create debugfs directory
  181. [ 0.218873] sensor_hub_init: power on
  182. [ 0.219166] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  183. [ 0.219179] hw-breakpoint: maximum watchpoint size is 8 bytes.
  184. [ 0.222469] 8941_boost: 5000 mV
  185. [ 0.222953] 8941_mvs1:
  186. [ 0.223007] 8941_mvs1: supplied by 8941_boost
  187. [ 0.223498] 8941_mvs2:
  188. [ 0.223548] 8941_mvs2: supplied by 8941_boost
  189. [ 0.230671] sps:BAM 0xf9984000 (va:0xc6ce0000) enabled: ver:0x6, number of pipes:20
  190. [ 0.230685] sps:BAM 0xf9984000 is registered.
  191. [ 0.230701] sps:sps is ready.
  192. [ 0.233809] gdsc_venus:
  193. [ 0.234102] gdsc_mdss:
  194. [ 0.234405] gdsc_jpeg:
  195. [ 0.234726] gdsc_vfe:
  196. [ 0.234993] gdsc_oxili_gx:
  197. [ 0.235080] gdsc_oxili_gx: supplied by 8841_s4_corner
  198. [ 0.235379] gdsc_oxili_cx:
  199. [ 0.235630] gdsc_usb_hsic:
  200. [ 0.236253] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  201. [ 0.242098] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c7000000
  202. [ 0.242667] Physical OCMEM zone layout:
  203. [ 0.242679] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
  204. [ 0.242693] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
  205. [ 0.242707] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
  206. [ 0.266256] bio: create slab <bio-0> at 0
  207. [ 0.267116] ethernet_phy:
  208. [ 0.267400] vph_pwr:
  209. [ 0.267725] platform regulator-tpd4s214.99: Driver reg-fixed-voltage requests probe deferral
  210. [ 0.268887] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
  211. [ 0.268975] ION-heap mm: Cannot specify alignment for this type of heap
  212. [ 0.269258] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
  213. [ 0.269343] ION-heap adsp: Cannot specify alignment for this type of heap
  214. [ 0.269525] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
  215. [ 0.270144] ION heap wb created at 0xbd800000 with size 1e00000
  216. [ 0.270171] ION heap iommuca created
  217. [ 0.270204] ION heap system created
  218. [ 0.270328] ION heap mm created at 0xb3000000 with size a500000
  219. [ 0.270356] ION heap adsp created at 0xaec00000 with size 4100000
  220. [ 0.270387] ION heap qsecom created at 0xad800000 with size 1100000
  221. [ 0.270438] ION heap audio created at 0xbf600000 with size 614000
  222. [ 0.270466] ION heap pil_1 created at 0x0f500000 with size 500000
  223. [ 0.272017] SCSI subsystem initialized
  224. [ 0.272155] usbcore: registered new interface driver usbfs
  225. [ 0.272232] usbcore: registered new interface driver hub
  226. [ 0.272348] usbcore: registered new device driver usb
  227. [ 0.273593] max77803 13-0066: max77803_i2c_probe
  228. [ 0.273635] of_max77803_dt: irq-gpio: 102
  229. [ 0.273644] of_max77803_dt: irq-base: 353
  230. [ 0.273652] of_max77803_dt: wc-irq-gpio: 0
  231. [ 0.273663] of_max77803_dt: timeout: 0
  232. [ 0.273670] of_max77803_dt: duty: 0
  233. [ 0.273678] of_max77803_dt: period: 0
  234. [ 0.273686] of_max77803_dt: pwm_id: 0
  235. [ 0.274167] max77803_i2c_probe: device found: rev.0x1, ver.0x0
  236. [ 0.275108] func: max77803_irq_init, irq_gpio: 102, irq_base: 353
  237. [ 0.277117] Trying to set irq flags for IRQ353
  238. [ 0.277373] Trying to set irq flags for IRQ354
  239. [ 0.277496] Trying to set irq flags for IRQ355
  240. [ 0.277618] Trying to set irq flags for IRQ356
  241. [ 0.277840] Trying to set irq flags for IRQ357
  242. [ 0.277962] Trying to set irq flags for IRQ358
  243. [ 0.278185] Trying to set irq flags for IRQ359
  244. [ 0.278307] Trying to set irq flags for IRQ360
  245. [ 0.278429] Trying to set irq flags for IRQ361
  246. [ 0.278653] Trying to set irq flags for IRQ362
  247. [ 0.278776] Trying to set irq flags for IRQ363
  248. [ 0.279000] Trying to set irq flags for IRQ364
  249. [ 0.279121] Trying to set irq flags for IRQ365
  250. [ 0.279244] Trying to set irq flags for IRQ366
  251. [ 0.279469] Trying to set irq flags for IRQ367
  252. [ 0.279591] Trying to set irq flags for IRQ368
  253. [ 0.279713] Trying to set irq flags for IRQ369
  254. [ 0.279835] Trying to set irq flags for IRQ370
  255. [ 0.279958] Trying to set irq flags for IRQ371
  256. [ 0.280185] Trying to set irq flags for IRQ372
  257. [ 0.280308] Trying to set irq flags for IRQ373
  258. [ 0.280430] Trying to set irq flags for IRQ374
  259. [ 0.280655] Trying to set irq flags for IRQ375
  260. [ 0.280808] Trying to set irq flags for IRQ376
  261. [ 0.281032] Trying to set irq flags for IRQ377
  262. [ 0.281155] Trying to set irq flags for IRQ378
  263. [ 0.281277] Trying to set irq flags for IRQ379
  264. [ 0.281501] Trying to set irq flags for IRQ380
  265. [ 0.281622] Trying to set irq flags for IRQ381
  266. [ 0.281846] Trying to set irq flags for IRQ382
  267. [ 0.281967] Trying to set irq flags for IRQ383
  268. [ 0.283404] max77803-safeout max77803-safeout: max77803_pmic_probe
  269. [ 0.283419] [../../../../../../kernel/samsung/msm8974/drivers/regulator/max77803-regulator.c:489] pdata->num_regulators:3
  270. [ 0.283433] [../../../../../../kernel/samsung/msm8974/drivers/regulator/max77803-regulator.c:495] for in pdata->num_regulators:3
  271. [ 0.283528] regulator regulator.59: func:max77803_reg_enable
  272. [ 0.284334] regulator regulator.59: func:max77803_get_voltage
  273. [ 0.284346] regulator regulator.59: func:max77803_get_voltage_register
  274. [ 0.284788] regulator regulator.59: func:max77803_list_voltage_safeout
  275. [ 0.284800] safeout1 range: at 4900 mV
  276. [ 0.284810] regulator regulator.59: func:max77803_get_voltage
  277. [ 0.284820] regulator regulator.59: func:max77803_get_voltage_register
  278. [ 0.285262] regulator regulator.59: func:max77803_list_voltage_safeout
  279. [ 0.285390] Error-Bad Function Input
  280. [ 0.285609] [../../../../../../kernel/samsung/msm8974/drivers/regulator/max77803-regulator.c:495] for in pdata->num_regulators:3
  281. [ 0.285696] regulator regulator.60: func:max77803_get_voltage
  282. [ 0.285708] regulator regulator.60: func:max77803_get_voltage_register
  283. [ 0.286153] regulator regulator.60: func:max77803_list_voltage_safeout
  284. [ 0.286165] safeout2 range: at 4900 mV
  285. [ 0.286174] regulator regulator.60: func:max77803_get_voltage
  286. [ 0.286185] regulator regulator.60: func:max77803_get_voltage_register
  287. [ 0.286627] regulator regulator.60: func:max77803_list_voltage_safeout
  288. [ 0.286711] Error-Bad Function Input
  289. [ 0.286832] [../../../../../../kernel/samsung/msm8974/drivers/regulator/max77803-regulator.c:495] for in pdata->num_regulators:3
  290. [ 0.286917] regulator regulator.61: func:max77803_reg_enable
  291. [ 0.287717] regulator regulator.61: func:max77803_get_voltage
  292. [ 0.287729] regulator regulator.61: func:max77803_get_voltage_register
  293. [ 0.288171] regulator regulator.61: func:max77803_list_voltage
  294. [ 0.288182] CHARGER: 60 <--> 2580 mA at 360 mA
  295. [ 0.288480] i2c-gpio i2c.87: using pins 60 (SDA) and 61 (SCL)
  296. [ 0.289102] i2c-gpio i2c.91: using pins 87 (SDA) and 88 (SCL)
  297. [ 0.289733] i2c-gpio i2c.92: using pins 95 (SDA) and 96 (SCL)
  298. [ 0.290358] i2c-gpio i2c.93: using pins 109 (SDA) and 108 (SCL)
  299. [ 0.290557] gpio_request: gpio-60 (sda) status -16
  300. [ 0.290576] i2c-gpio: probe of i2c.94 failed with error -16
  301. [ 0.291202] Linux media interface: v0.10
  302. [ 0.291252] Linux video capture interface: v2.00
  303. [ 0.294173] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c6de0000, with 3 ctx banks
  304. [ 0.295313] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c6e80000, with 3 ctx banks
  305. [ 0.297080] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c6ea0000, with 5 ctx banks
  306. [ 0.298163] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c6ec0000, with 3 ctx banks
  307. [ 0.299157] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c6ee0000, with 3 ctx banks
  308. [ 0.300272] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
  309. [ 0.300408] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
  310. [ 0.300537] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
  311. [ 0.300680] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
  312. [ 0.300816] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
  313. [ 0.300935] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
  314. [ 0.301107] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
  315. [ 0.301240] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
  316. [ 0.301367] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
  317. [ 0.301488] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
  318. [ 0.301609] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
  319. [ 0.301770] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
  320. [ 0.301891] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
  321. [ 0.302015] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
  322. [ 0.302147] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
  323. [ 0.302266] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
  324. [ 0.302385] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
  325. [ 0.303941] [SENSORS CORE] sensors_class_init
  326. [ 0.304097] Advanced Linux Sound Architecture Driver Version 1.0.25.
  327. [ 0.304634] Bluetooth: Core ver 2.16
  328. [ 0.304681] NET: Registered protocol family 31
  329. [ 0.304690] Bluetooth: HCI device and connection manager initialized
  330. [ 0.304702] Bluetooth: HCI socket layer initialized
  331. [ 0.304712] Bluetooth: L2CAP socket layer initialized
  332. [ 0.304975] Bluetooth: SCO socket layer initialized
  333. [ 0.305290] regulatory is not upadted via queue_regulatory_request.
  334. [ 0.307440] Switching to clocksource arch_sys_counter
  335. [ 0.355138] NET: Registered protocol family 2
  336. [ 0.364535] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  337. [ 0.365210] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  338. [ 0.366696] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  339. [ 0.367390] TCP: Hash tables configured (established 131072 bind 65536)
  340. [ 0.367402] TCP: reno registered
  341. [ 0.367421] UDP hash table entries: 512 (order: 2, 16384 bytes)
  342. [ 0.367480] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  343. [ 0.368015] NET: Registered protocol family 1
  344. [ 0.368359] Trying to unpack rootfs image as initramfs...
  345. [ 0.405732] Freeing initrd memory: 636K
  346. [ 0.412713] Detected 9 counters on the L2CC PMU.
  347. [ 0.414778] gpiochip_find_base: found new base at 992
  348. [ 0.414886] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
  349. [ 0.415476] gpiochip_find_base: found new base at 960
  350. [ 0.415569] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
  351. [ 0.415614] gpiochip_find_base: found new base at 928
  352. [ 0.415712] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
  353. [ 0.416288] gpiochip_find_base: found new base at 896
  354. [ 0.416385] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
  355. [ 0.416430] gpiochip_find_base: found new base at 864
  356. [ 0.416520] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
  357. [ 0.417126] gpiochip_find_base: found new base at 832
  358. [ 0.417223] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
  359. [ 0.417307] gpiochip_find_base: found new base at 800
  360. [ 0.417397] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
  361. [ 0.418047] gpiochip_find_base: found new base at 768
  362. [ 0.418145] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
  363. [ 0.418190] gpiochip_find_base: found new base at 736
  364. [ 0.418281] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
  365. [ 0.418918] gpiochip_find_base: found new base at 704
  366. [ 0.419016] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
  367. [ 0.419089] gpiochip_find_base: found new base at 672
  368. [ 0.419180] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
  369. [ 0.419842] gpiochip_find_base: found new base at 640
  370. [ 0.419934] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
  371. [ 0.419984] gpiochip_find_base: found new base at 608
  372. [ 0.420076] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
  373. [ 0.420745] gpiochip_find_base: found new base at 576
  374. [ 0.420838] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
  375. [ 0.420968] gpiochip_find_base: found new base at 544
  376. [ 0.421068] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
  377. [ 0.421760] gpiochip_find_base: found new base at 512
  378. [ 0.421853] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
  379. [ 0.421901] gpiochip_find_base: found new base at 480
  380. [ 0.422000] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
  381. [ 0.422712] gpiochip_find_base: found new base at 448
  382. [ 0.422806] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
  383. [ 0.424764] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
  384. [ 0.429536] pil_venus fdce0000.qcom,venus: using secure boot
  385. [ 0.444302] NET: Registered protocol family 27
  386. [ 0.451630] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
  387. [ 0.451663] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 1
  388. [ 0.451679] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 1
  389. [ 0.451691] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 0
  390. [ 0.455199] L2 @ 729600 KHz
  391. [ 0.455329] CPU0 @ 960000 KHz
  392. [ 0.455338] CPU1 @ unknown rate. Forcing new rate.
  393. [ 0.455502] CPU1 @ 300000 KHz
  394. [ 0.455524] CPU2 @ unknown rate. Forcing new rate.
  395. [ 0.455697] CPU2 @ 300000 KHz
  396. [ 0.455719] CPU3 @ unknown rate. Forcing new rate.
  397. [ 0.455887] CPU3 @ 300000 KHz
  398. [ 0.462825] brcm_wlan_init: gpio_to_irq IRQ=620
  399. [ 0.463361] brcm_init_wlan_mem: WIFI MEM Allocated
  400. [ 0.463682] ####init
  401. [ 0.466942] SEC_MASTERSTATS : Init done
  402. [ 0.470310] msm_rpm_log_probe: OK
  403. [ 0.470940] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
  404. [ 0.478106] notifier sec_otg_register_booster 277: register max77803
  405. [ 0.486909] mpm_counter: [ 0.486893]:(204074)
  406. [ 0.492554] func:sec_therm_init
  407. [ 0.492701] sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
  408. [ 0.492741] sec_getlog_supply_kloginfo: 0xc14af6c8
  409. [ 0.493100] audit: initializing netlink socket (enabled)
  410. [ 0.493740] highmem bounce pool size: 64 pages
  411. [ 0.495344] zbud: loaded
  412. [ 0.495573] VFS: Disk quotas dquot_6.5.2
  413. [ 0.495676] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  414. [ 0.496436] exFAT: Core Version 1.2.24
  415. [ 0.496441] exFAT: FS Version 1.2.24
  416. [ 0.496827] Registering sdcardfs 0.1
  417. [ 0.496980] fuse init (API version 7.18)
  418. [ 0.497297] msgmni has been set to 973
  419. [ 0.497325] SELinux: Registering netfilter hooks
  420. [ 0.497605] FIPS: No test for cipher_null (cipher_null-generic)
  421. [ 0.497696] FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
  422. [ 0.497781] FIPS: No test for digest_null (digest_null-generic)
  423. [ 0.497860] FIPS: No test for compress_null (compress_null-generic)
  424. [ 0.499767] FIPS: No test for lz4 (lz4-generic)
  425. [ 0.499836] FIPS: No test for stdrng (krng)
  426. [ 0.508545] alg: skcipher: Failed to load transform for ecb(blowfish): -2
  427. [ 0.509106] alg: skcipher: Failed to load transform for ecb(blowfish): -2
  428. [ 0.509708] alg: skcipher: Failed to load transform for cbc(blowfish): -2
  429. [ 0.510261] alg: skcipher: Failed to load transform for cbc(blowfish): -2
  430. [ 0.510883] alg: skcipher: Failed to load transform for ctr(blowfish): -2
  431. [ 0.511493] alg: skcipher: Failed to load transform for ctr(blowfish): -2
  432. [ 0.514730] alg: skcipher: Failed to load transform for lrw(twofish): -2
  433. [ 0.515218] alg: skcipher: Failed to load transform for lrw(twofish): -2
  434. [ 0.515657] alg: skcipher: Failed to load transform for xts(twofish): -2
  435. [ 0.516142] alg: skcipher: Failed to load transform for xts(twofish): -2
  436. [ 0.516743] alg: skcipher: Failed to load transform for ecb(serpent): -2
  437. [ 0.517291] alg: skcipher: Failed to load transform for ecb(serpent): -2
  438. [ 0.517976] alg: skcipher: Failed to load transform for cbc(serpent): -2
  439. [ 0.518522] alg: skcipher: Failed to load transform for cbc(serpent): -2
  440. [ 0.519116] alg: skcipher: Failed to load transform for ctr(serpent): -2
  441. [ 0.519706] alg: skcipher: Failed to load transform for ctr(serpent): -2
  442. [ 0.520145] alg: skcipher: Failed to load transform for lrw(serpent): -2
  443. [ 0.520631] alg: skcipher: Failed to load transform for lrw(serpent): -2
  444. [ 0.521141] alg: skcipher: Failed to load transform for xts(serpent): -2
  445. [ 0.521630] alg: skcipher: Failed to load transform for xts(serpent): -2
  446. [ 0.522966] alg: skcipher: Failed to load transform for lrw(aes): -2
  447. [ 0.523402] alg: skcipher: Failed to load transform for lrw(aes): -2
  448. [ 0.526750] alg: skcipher: Failed to load transform for ecb(cast5): -2
  449. [ 0.527308] alg: skcipher: Failed to load transform for ecb(cast5): -2
  450. [ 0.527958] alg: skcipher: Failed to load transform for ecb(cast6): -2
  451. [ 0.528498] alg: skcipher: Failed to load transform for ecb(cast6): -2
  452. [ 0.529314] alg: hash: Failed to load transform for michael_mic: -2
  453. [ 0.529631] alg: hash: Failed to load transform for michael_mic: -2
  454. [ 0.530251] alg: skcipher: Failed to load transform for ecb(tea): -2
  455. [ 0.530844] alg: skcipher: Failed to load transform for ecb(tea): -2
  456. [ 0.531437] alg: skcipher: Failed to load transform for ecb(xtea): -2
  457. [ 0.532027] alg: skcipher: Failed to load transform for ecb(xtea): -2
  458. [ 0.532564] alg: skcipher: Failed to load transform for ecb(khazad): -2
  459. [ 0.533149] alg: skcipher: Failed to load transform for ecb(khazad): -2
  460. [ 0.533468] alg: hash: Failed to load transform for wp512: -2
  461. [ 0.533735] alg: hash: Failed to load transform for wp512: -2
  462. [ 0.534048] alg: hash: Failed to load transform for wp384: -2
  463. [ 0.534376] alg: hash: Failed to load transform for wp384: -2
  464. [ 0.534695] alg: hash: Failed to load transform for wp256: -2
  465. [ 0.534959] alg: hash: Failed to load transform for wp256: -2
  466. [ 0.535549] alg: skcipher: Failed to load transform for ecb(tnepres): -2
  467. [ 0.536102] alg: skcipher: Failed to load transform for ecb(tnepres): -2
  468. [ 0.536697] alg: skcipher: Failed to load transform for ecb(anubis): -2
  469. [ 0.537234] alg: skcipher: Failed to load transform for ecb(anubis): -2
  470. [ 0.537886] alg: skcipher: Failed to load transform for cbc(anubis): -2
  471. [ 0.538474] alg: skcipher: Failed to load transform for cbc(anubis): -2
  472. [ 0.538741] alg: hash: Failed to load transform for tgr192: -2
  473. [ 0.539053] alg: hash: Failed to load transform for tgr192: -2
  474. [ 0.539317] alg: hash: Failed to load transform for tgr160: -2
  475. [ 0.539628] alg: hash: Failed to load transform for tgr160: -2
  476. [ 0.539894] alg: hash: Failed to load transform for tgr128: -2
  477. [ 0.540206] alg: hash: Failed to load transform for tgr128: -2
  478. [ 0.540739] alg: skcipher: Failed to load transform for ecb(xeta): -2
  479. [ 0.541372] alg: skcipher: Failed to load transform for ecb(xeta): -2
  480. [ 0.541802] alg: skcipher: Failed to load transform for pcbc(fcrypt): -2
  481. [ 0.542277] alg: skcipher: Failed to load transform for pcbc(fcrypt): -2
  482. [ 0.542861] alg: skcipher: Failed to load transform for ecb(camellia): -2
  483. [ 0.543401] alg: skcipher: Failed to load transform for ecb(camellia): -2
  484. [ 0.543985] alg: skcipher: Failed to load transform for cbc(camellia): -2
  485. [ 0.544798] alg: skcipher: Failed to load transform for cbc(camellia): -2
  486. [ 0.545170] alg: skcipher: Failed to load transform for salsa20: -2
  487. [ 0.545435] alg: skcipher: Failed to load transform for salsa20: -2
  488. [ 0.546020] alg: aead: Failed to load transform for gcm(aes): -2
  489. [ 0.546604] alg: aead: Failed to load transform for gcm(aes): -2
  490. [ 0.547095] alg: skcipher: Failed to load transform for cts(cbc(aes)): -2
  491. [ 0.547608] alg: skcipher: Failed to load transform for cts(cbc(aes)): -2
  492. [ 0.548057] alg: skcipher: Failed to load transform for cts(cbc(aes)): -2
  493. [ 0.548543] alg: skcipher: Failed to load transform for cts(cbc(aes)): -2
  494. [ 0.548863] alg: hash: Failed to load transform for rmd128: -2
  495. [ 0.549126] alg: hash: Failed to load transform for rmd128: -2
  496. [ 0.549443] alg: hash: Failed to load transform for rmd160: -2
  497. [ 0.549708] alg: hash: Failed to load transform for rmd160: -2
  498. [ 0.550022] alg: hash: Failed to load transform for rmd256: -2
  499. [ 0.550287] alg: hash: Failed to load transform for rmd256: -2
  500. [ 0.550605] alg: hash: Failed to load transform for rmd320: -2
  501. [ 0.551081] alg: hash: Failed to load transform for rmd320: -2
  502. [ 0.551679] alg: skcipher: Failed to load transform for ecb(seed): -2
  503. [ 0.552228] alg: skcipher: Failed to load transform for ecb(seed): -2
  504. [ 0.552542] alg: pcomp: Failed to load transform for zlib: -2
  505. [ 0.552804] alg: pcomp: Failed to load transform for zlib: -2
  506. [ 0.557180] alg: hash: Failed to load transform for hmac(rmd128): -2
  507. [ 0.557780] alg: hash: Failed to load transform for hmac(rmd128): -2
  508. [ 0.558373] alg: hash: Failed to load transform for hmac(rmd160): -2
  509. [ 0.558911] alg: hash: Failed to load transform for hmac(rmd160): -2
  510. [ 0.559388] alg: hash: Failed to load transform for vmac(aes): -2
  511. [ 0.559865] alg: hash: Failed to load transform for vmac(aes): -2
  512. [ 0.560134] alg: cprng: Failed to load transform for ansi_cprng: -2
  513. [ 0.560449] alg: cprng: Failed to load transform for ansi_cprng: -2
  514. [ 0.561317] alg: aead: Failed to load transform for rfc4106(gcm(aes)): -2
  515. [ 0.562188] alg: aead: Failed to load transform for rfc4106(gcm(aes)): -2
  516. [ 0.562248] tcrypt: one or more tests failed!
  517. [ 0.562554] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  518. [ 0.562562] io scheduler noop registered
  519. [ 0.562567] io scheduler deadline registered
  520. [ 0.562579] io scheduler row registered
  521. [ 0.562595] io scheduler cfq registered (default)
  522. [ 0.562601] io scheduler test-iosched registered
  523. [ 0.562654] io scheduler bfq registered
  524. [ 0.562658] BFQ I/O-scheduler: v7r8
  525. [ 0.562792] gpiochip_find_base: found new base at 444
  526. [ 0.562845] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
  527. [ 0.563061] qcom,qpnp-pin qpnp-pin-2: qpnp_pin_probe: gpio_chip registered between 444-447
  528. [ 0.563730] gpiochip_find_base: found new base at 408
  529. [ 0.563771] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
  530. [ 0.564787] qcom,qpnp-pin qpnp-pin-15: qpnp_pin_probe: gpio_chip registered between 408-443
  531. [ 0.566353] gpiochip_find_base: found new base at 401
  532. [ 0.566396] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
  533. [ 0.566767] qcom,qpnp-pin qpnp-pin-16: qpnp_pin_probe: gpio_chip registered between 401-407
  534. [ 0.567230] mdss_mdp_probe: mdss_mdp_probe : ++
  535. [ 0.567266] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc6f00000
  536. [ 0.567284] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc6e9e000
  537. [ 0.567388] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
  538. [ 0.567499] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
  539. [ 0.567589] mdss_mdp_parse_dt_ad_cfg: SS is not using assertive display
  540. [ 0.567603] mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1691:cmdline panel not set disp_idx=[00000000]
  541. [ 0.568965] mdss_mdp_probe: mdss_mdp_probe : --
  542. [ 0.569383] mdss_dsi_driver_init ++
  543. [ 0.569463] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  544. [ 0.569486] mdss_dsi_get_panel_cfg:628: cfg:[]
  545. [ 0.569490] mdss_dsi_ctrl_probe:1771:dsi specific cfg not present
  546. [ 0.569502] mdss_dsi_panel_init: Panel Name = samsung amoled 1080p command mode dsi S6E3FA0 panel
  547. [ 0.569575] mdss_dsi_parse_dcs_cmds: dcs_cmd=29 len=208, cmd_cnt=17 link_state=1
  548. [ 0.569584] mdss_dsi_parse_dcs_cmds: dcs_cmd=5 len=18, cmd_cnt=2 link_state=1
  549. [ 0.569597] mdss_samsung_parse_panel_cmd:3334, Unable to read samsung,panel-mtp-read-cmds
  550. [ 0.569747] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-display-unblank-cmds
  551. [ 0.569914] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-display-blank-cmds
  552. [ 0.570145] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-touchsensing-on-cmds
  553. [ 0.570264] mdss_samsung_parse_panel_cmd:3334, Unable to read qcom,panel-touchsensing-off-cmds
  554. [ 0.570434] mdss_dsi_panel_init:4664 Continuous splash flag enabled.
  555. [ 0.570577] [mdss_dsi_panel_init] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
  556. [ 0.570583] [mdnie lite] start!
  557. [ 0.570685] [mdnie lite] end!
  558. [ 0.570796] dsi_panel_device_register : ++
  559. [ 0.570832] mdss_dsi_regulator_init: vregn(3)
  560. [ 0.571028] dsi_panel_device_register:2044, broadcast (0)
  561. [ 0.571061] dsi_panel_device_register:2086, Disp_en_gpio (421)
  562. [ 0.571134] dsi_panel_device_register:2376, Disp_te_gpio (12)
  563. [ 0.571323] dsi_panel_device_register:2425, Disp_rst_gpio (426)
  564. [ 0.571481] mdss_dsi_retrieve_ctrl_resources: ctrl_base=00000000 ctrl_size=1f8 phy_base=00000000 phy_size=2b0
  565. [ 0.571633] dsi_panel_device_register : splash enabled..panel_power_on (1)
  566. [ 0.571639] mdss_dsi_panel_power_on: enable=1 vregn(3)
  567. [ 0.571643] mdss_dsi_panel_power_on : Set High LCD Enable GPIO
  568. [ 0.595072] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
  569. [ 0.595225] mdss_hw_init: MDP Rev=10020000
  570. [ 0.595977] dsi_panel_device_register: Panel data initialized
  571. [ 0.595982] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized
  572. [ 0.595997] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  573. [ 0.596021] mdss_dsi_get_panel_cfg:628: cfg:[]
  574. [ 0.596025] mdss_dsi_ctrl_probe:1771:dsi specific cfg not present
  575. [ 0.596031] mdss_dsi_pref_prim_panel:can't find panel phandle
  576. [ 0.596158] mdss_dsi_ctrl_probe: can't find panel node
  577. [ 0.596469] mdss_dsi_driver_init --
  578. [ 0.596475] mdss_dsi_status_init: DSI status check interval:5000
  579. [ 0.596671] hdmi_tx_get_dt_data : drm_orkaround = true
  580. [ 0.596686] hdmi_tx_init_resource: 'core_physical': start = 0xc6eda100, len=0x370
  581. [ 0.596696] hdmi_tx_init_resource: 'phy_physical': start = 0xc6edc500, len=0x7c
  582. [ 0.596708] hdmi_tx_init_resource: 'qfprom_physical': start = 0xc6ef8000, len=0x60f0
  583. [ 0.597205] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
  584. [ 0.597920] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
  585. [ 0.598537] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 0
  586. [ 0.598640] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
  587. [ 0.598670] samsung_dsi_panel_event_handler : unknown event
  588. [ 0.598814] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
  589. [ 0.598819] thrd_start =4 thrd_cont=4
  590. [ 0.598887] Registered led device: lcd-backlight
  591. [ 0.598904] [mdss_dsi_panel_registered] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
  592. [ 0.598909] mdss_dsi_panel_registered:2714, Panel registered succesfully
  593. [ 0.598920] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
  594. [ 0.598941] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 0
  595. [ 0.599017] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
  596. [ 0.599075] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
  597. [ 0.599094] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 0
  598. [ 0.599183] mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
  599. [ 0.599215] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
  600. [ 0.599233] sii8240_init sii8240: check mhl
  601. [ 0.599275] gpio: mhl_irq = 31
  602. [ 0.599299] gpio: mhl_reset = 405
  603. [ 0.599304] of_sii8240_parse_dt() gpio_mhl_reset_type = 3
  604. [ 0.599319] gpio: mhl_scl = 52
  605. [ 0.599333] gpio: mhl_sda = 51
  606. [ 0.599354] gpio: mhl_en = 404
  607. [ 0.599359] of_sii8240_parse_dt() gpio_mhl_en_type = 3
  608. [ 0.599364] swing_level = 0x25
  609. [ 0.599369] barcode_emul = false
  610. [ 0.599372] drm_workaround = true
  611. [ 0.599400] sii8240,vcc_1p2v is not exist in device tree
  612. [ 0.599468] sii8240,vcc_1p8v is not exist in device tree
  613. [ 0.599585] sii8240,vcc_3p3v is not exist in device tree
  614. [ 0.599675] of_sii8240_parse_dt: hdmi_pdev [0Xead3bc00] to pdata->pdev
  615. [ 0.599726] sii8240_mhlv2dt 9-0039: success client_addr 0x39
  616. [ 0.599980] sii8240_mhlv2dt 9-0039: sii8240 irq : 329
  617. [ 0.599991] sii8240_mhlv2dt 9-0039: sii8240: registering input device
  618. [ 0.600068] input: sii8240_rcp as /devices/virtual/input/input0
  619. [ 0.600326] sii8240_mhlv2dt 9-0049: success client_addr 0x49
  620. [ 0.600342] sii8240_mhlv2dt 9-004d: success client_addr 0x4D
  621. [ 0.600356] sii8240_mhlv2dt 9-0059: success client_addr 0x59
  622. [ 0.600371] sii8240_mhlv2dt 9-0064: success client_addr 0x64
  623. [ 0.626868] sps: BAM device 0xf9944000 is not registered yet.
  624. [ 0.626989] sps:BAM 0xf9944000 is registered.
  625. [ 0.629791] f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is a MSM HS UART
  626. [ 0.632005] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
  627. [ 0.632086] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
  628. [ 0.635912] msm_serial_hsl_init: driver initialized
  629. [ 0.638267] diagchar initialized now
  630. [ 0.638865] kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
  631. [ 0.639554] kgsl bus ib [0] = 2400000000
  632. [ 0.639559] kgsl bus ib [1] = 4656000000
  633. [ 0.639563] kgsl bus ib [2] = 7464000000
  634. [ 0.639567] kgsl bus index is 2 for pwrlevel 0
  635. [ 0.639570] kgsl bus index is 1 for pwrlevel 1
  636. [ 0.639574] kgsl bus index is 1 for pwrlevel 2
  637. [ 0.639578] kgsl bus index is 0 for pwrlevel 3
  638. [ 0.640142] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  639. [ 0.641504] GPU_SYSFS ----------- gpu_sysfs_init -- 224
  640. [ 0.641757] GPU_SYSFS ----------- gpu_sysfs_probe -- 158
  641. [ 0.641761] GPU_SYSFS ----------- gpu_sysfs_device_init -- 144
  642. [ 0.641766] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 29
  643. [ 0.641790] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 115
  644. [ 0.641794] GPU_SYSFS ----------- gpu_sysfs_probe -- 178
  645. [ 0.641809] GPU_SYSFS ----------- gpu_sysfs_init -- 250
  646. [ 0.641851] barcode_emul_ice4_hlte: barcode_emul_probe probe!
  647. [ 0.641953] barcode_emul_ice4_hlte: 8 system_rev!
  648. [ 0.641957] barcode_emul_ice4_hlte: barcode_emul_probe setting gpio config.
  649. [ 0.641962] barcode_emul_ice4_hlte: barcode_gpio_config
  650. [ 0.642270] barcode_emul_ice4_hlte: probe complete barcode_emul_probe
  651. [ 0.645434] brd: module loaded
  652. [ 0.646960] loop: module loaded
  653. [ 0.647172] zram: Created 1 device(s) ...
  654. [ 0.647613] QSEECOM: qseecom_probe: support_bus_scaling=0x1
  655. [ 0.647619] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
  656. [ 0.647624] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
  657. [ 0.647630] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
  658. [ 0.647634] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
  659. [ 0.647639] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0
  660. [ 0.647670] QSEECOM: qseecom_probe: secure app region addr=0x7500000 size=0xb00000
  661. [ 0.647941] init tzic
  662. [ 0.648187] bcm2079x-i2c 10-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
  663.  
  664. [ 0.648290] client irq is 330
  665. [ 0.648295] bcm2079x-i2c 10-0077: requesting IRQ 330 with IRQF_NO_SUSPEND
  666. [ 0.648373] bcm2079x-i2c 10-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
  667. [ 0.648407] func:max77803_muic_init
  668. [ 0.648576] func:max77803_muic_probe
  669. [ 0.648585] max77803-muic max77803-muic: adc:368 chgtype:372, adc1k371
  670. [ 0.648589] max77803-muic max77803-muic: input->name:max77803-muic
  671. [ 0.648667] input: max77803-muic as /devices/i2c.87/i2c-13/13-0066/max77803-muic/input/input1
  672. [ 0.648719] max77803_muic_init_cb: MUIC ret=0
  673. [ 0.648726] max77803-muic max77803-muic: func:max77803_muic_set_adcdbset value:2
  674. [ 0.649100] max77803-muic max77803-muic: max77803_muic_set_adcdbset: ADCDBSET(0x20)
  675. [ 0.650382] max77803_muic_probe: CDETCTRL1(0x0d)
  676. [ 0.650412] max77803-muic max77803-muic: func:max77803_muic_irq_init
  677. [ 0.651593] max77803-muic max77803-muic: adc:368 chgtype:372 adc1k:371 vbvolt:376
  678. [ 0.651963] max77803-muic max77803-muic: max77803_muic_irq_init: reg=7, val=9
  679. [ 0.652332] max77803-muic max77803-muic: max77803_muic_irq_init: reg=8, val=11
  680. [ 0.652700] max77803-muic max77803-muic: max77803_muic_irq_init: reg=9, val=0
  681. [ 0.653069] max77803-muic max77803-muic: max77803_muic_irq_init: reg=1, val=0
  682. [ 0.653437] max77803-muic max77803-muic: max77803_muic_irq_init: reg=2, val=0
  683. [ 0.653806] max77803-muic max77803-muic: max77803_muic_irq_init: reg=3, val=0
  684. [ 0.654180] max77803_set_jig_state: 0
  685. [ 0.654185] max77803-muic max77803-muic: max77803_muic_uart_uevent: state:0
  686. [ 0.654228] khhan Entering dualwave_init 454
  687. [ 0.654292] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  688. [ 0.654296] i2c-core: driver [tabla-i2c-core] using legacy resume method
  689. [ 0.654367] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  690. [ 0.654371] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  691. [ 0.654575] SCSI Media Changer driver v0.25
  692. [ 0.654810] spi_qsd f9923000.spi: msm_spi_dt_to_pdata pdata->use_bam: 1
  693. [ 0.654881] sps: BAM device 0xf9904000 is not registered yet.
  694. [ 0.654945] sps:BAM 0xf9904000 is registered.
  695. [ 0.657975] sps:BAM 0xf9904000 (va:0xc6fa0000) enabled: ver:0x13, number of pipes:24
  696. [ 0.660307] spi_qsd f9967000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
  697. [ 0.660897] barcode_emul_ice4_hlte: barcode_fpga_fimrware_update_start
  698. [ 0.668362] tun: Universal TUN/TAP device driver, 1.6
  699. [ 0.668368] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  700. [ 0.668492] rmnet_init: BAM devices[9]
  701. [ 0.671432] PPP generic driver version 2.4.2
  702. [ 0.671531] PPP BSD Compression module registered
  703. [ 0.671537] PPP Deflate Compression module registered
  704. [ 0.671572] PPP MPPE Compression module registered
  705. [ 0.671577] NET: Registered protocol family 24
  706. [ 0.671585] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  707. [ 0.671590] CSLIP: code copyright 1989 Regents of the University of California.
  708. [ 0.671598] function asix_init line 3887
  709. [ 0.671682] usbcore: registered new interface driver asix
  710. [ 0.671709] usbcore: registered new interface driver cdc_ether
  711. [ 0.671735] usbcore: registered new interface driver net1080
  712. [ 0.671760] usbcore: registered new interface driver cdc_subset
  713. [ 0.671785] usbcore: registered new interface driver zaurus
  714. [ 0.671867] usbcore: registered new interface driver cdc_ncm
  715. [ 0.701254] max77803-muic:max77803_muic_dock_detect CONTROL1:9
  716. [ 0.701699] max77803-muic:max77803_muic_dock_detect STATUS1:0x3f, 2:0x41
  717. [ 0.701705] max77803-muic:max77803_muic_dock_detect adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:20
  718. [ 0.923382] dwc3-msm: sec_otg_init is called.
  719. [ 0.923387] sec_otg_init: register notifier
  720. [ 0.923393] get_vbus_detect_gpio, cannot get vbus-detect-gpio, ret=-22
  721. [ 0.924129] usbcore: registered new interface driver cdc_acm
  722. [ 0.924134] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  723. [ 0.924140] Initializing USB Mass Storage driver...
  724. [ 0.924171] usbcore: registered new interface driver usb-storage
  725. [ 0.924176] USB Mass Storage support registered.
  726. [ 0.924222] usbcore: registered new interface driver ums-alauda
  727. [ 0.924246] usbcore: registered new interface driver ums-cypress
  728. [ 0.924268] usbcore: registered new interface driver ums-datafab
  729. [ 0.924291] usbcore: registered new interface driver ums-freecom
  730. [ 0.924313] usbcore: registered new interface driver ums-isd200
  731. [ 0.924336] usbcore: registered new interface driver ums-jumpshot
  732. [ 0.924358] usbcore: registered new interface driver ums-karma
  733. [ 0.924380] usbcore: registered new interface driver ums-onetouch
  734. [ 0.924404] usbcore: registered new interface driver ums-sddr09
  735. [ 0.924427] usbcore: registered new interface driver ums-sddr55
  736. [ 0.924450] usbcore: registered new interface driver ums-usbat
  737. [ 0.924504] usbcore: registered new interface driver usbserial
  738. [ 0.924509] usbserial: USB Serial Driver core
  739. [ 0.924532] usbcore: registered new interface driver pl2303
  740. [ 0.924551] USB Serial support registered for pl2303
  741. [ 0.924731] host_notifier host-notifier.44: notifier_probe
  742. [ 0.925260] usb: android_bind disconnect
  743. [ 0.925295] mbim_init: initialize 1 instances
  744. [ 0.925379] mbim_init: Initialized 1 ports
  745. [ 0.926556] rndis_qc_init: initialize rndis QC instance
  746. [ 0.926818] gadget: Mass Storage Function, version: 2009/09/11
  747. [ 0.926823] gadget: Number of LUNs=1
  748. [ 0.926828] lun0: LUN: removable CD-ROM file: (no medium)
  749. [ 0.926957] conn_gadget_function_init(#) call conn_gadget_setup
  750. [ 0.927018] conn_gadget_setup
  751. [ 0.927196] usb: composite_bind idVendor=0x0, idProduct=0x0
  752. [ 0.927201] usb: composite_bind bcdDevice=0x0
  753. [ 0.927205] usb: composite_bind composite_manufacturer=
  754. [ 0.927211] gadget: android_usb ready
  755. [ 0.927910] mousedev: PS/2 mouse device common for all mice
  756. [ 0.928150] cypress_touchkey_init
  757. [ 0.928406] cypress_parse_dt: SCL:96, SDA:95, INT:436, ID:101, VDD_GPIO:-22 ,VCC_EN:-22, FW_UPDATE:0
  758. [ 0.928648] cypress_touchkey 21-0020: cypress_power_onoff: power on
  759. [ 0.945940] barcode_emul_ice4_hlte: FPGA firmware update success
  760. [ 1.080882] cypress_touchkey 21-0020: touchkey id = CYPRESS
  761. [ 1.081878] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 12, module_ver = 9
  762. [ 1.114807] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
  763. [ 1.114891] input: sec_touchkey as /devices/i2c.92/i2c-21/21-0020/input/input2
  764. [ 1.114972] cypress_touchkey 21-0020: gpio_to_irq IRQ 623
  765. [ 1.115185] tkey/hlte_cypress_tkey.fw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  766. [ 1.115194] cypress_touchkey 21-0020: the fw 0x12 is loaded (size=8192)
  767. [ 1.115200] cypress_touchkey 21-0020: tkey_flash_fw : IC aleady have latest firmware (fw:0x12 module:0x9)
  768. [ 1.117061] cypress_touchkey 21-0020: cypress_touchkey_auto_cal: data[0]=50 data[1]=12 data[2]=9 data[3]=1
  769. [ 1.218857] cypress_touchkey 21-0020: cypress_touchkey_probe: done
  770. [ 1.218891] cypress_touchkey_init: init done 0
  771. [ 1.219141] usbcore: registered new interface driver xpad
  772. [ 1.219166] wacom_get_dt_coords: x_invert = 1, y_invert = 0, xy_switch = 1
  773. [ 1.219304] wacom_parse_dt: fwe1: 80, reset_n: 79, pdct: 145, insert: 427, model: SM-N9005, mpu: 2c, irq_flags=2
  774. [ 1.219413] wacom_request_gpio: request gpio
  775. [ 1.219482] wacom_i2c_probe: wacom : gpio_to_irq : 327
  776. [ 1.219688] wacom_g5sp_i2c 6-0056: wacom_compulsory_flash_mode: FWE1 is LOW
  777. [ 1.219693] wacom_g5sp_i2c 6-0056: wacom_start
  778. [ 1.420900] wacom_i2c_init_firm_data: Digitizer type is B968
  779. [ 1.420905] wacom_i2c_probe: wacon ic turn on
  780. [ 1.420964] wacom_g5sp_i2c 6-0056: wacom_i2c_query: start
  781. [ 1.524554] wacom_g5sp_i2c 6-0056: wacom_i2c_query: 0th ret of wacom query=9
  782. [ 1.524560] wacom_g5sp_i2c 6-0056: wacom_i2c_query: x_max=0x3120, y_max=0x1BA2
  783. [ 1.524563] , pressure_max=0x3FF
  784. [ 1.524568] wacom_g5sp_i2c 6-0056: wacom_i2c_query: fw_version=0x0 (d7:0x1,d8:0x74)
  785. [ 1.524574] wacom_g5sp_i2c 6-0056: wacom_i2c_query: F, 37, 0, 22, 60, 3, FF, 1, 74
  786. [ 1.524655] input: sec_e-pen as /devices/f9928000.i2c/i2c-6/6-0056/input/input3
  787. [ 1.524663] wacom_g5sp_i2c 6-0056: wacom_i2c_input_open
  788. [ 1.524668] wacom_g5sp_i2c 6-0056: wacom_i2c_enable
  789. [ 1.524859] wacom_g5sp_i2c 6-0056: wacom_load_fw_from_req_fw
  790. [ 1.524865] wacom_g5sp_i2c 6-0056: wacom_load_fw_from_req_fw: MPU type: 2c , BOOT ver: 0
  791. [ 1.524872] wacom_g5sp_i2c 6-0056: wacom_load_fw_from_req_fw: firmware name: epen/W9010_0174.bin, size: 65535
  792. [ 1.524878] wacom_g5sp_i2c 6-0056: wacom_load_fw_from_req_fw: firmware version = 174
  793. [ 1.524883] wacom_g5sp_i2c 6-0056: wacom_firmware_update: firmware update does not need.
  794. [ 1.525212] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_probe start.
  795. [ 1.525365] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply0: 8941_l10
  796. [ 1.525374] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: Unable to read synaptics,sub-project
  797. [ 1.525382] synaptics_parse_dt: power= 416, tsp_int= 437, X= 1079, Y= 1919, project= H, config[0][0][0][0], tablet = 0 reset= -22 surface-only= 0
  798. [ 1.525609] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: sensor_en[3.3V][416] is enabled[OK]
  799. [ 1.525824] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: 8941_l10 is enabled[OK]
  800. [ 1.677995] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 found (page 0): INT_SRC[21] BASE_ADDRS[00,08,00,1c]
  801. [ 1.678431] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f34_read_version: [IC] test_result[0][date, revision, version] [10/17, 0xA0, 0x30], Bootlader : vV606
  802. [ 1.678700] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F01 found (page 0): INT_SRC[01] BASE_ADDRS[04,0C,1B,20]
  803. [ 1.678851] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
  804. [ 1.679288] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 found (page 0): INT_SRC[01] BASE_ADDRS[06,11,00,3d]
  805. [ 1.680425] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
  806. [ 1.681000] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919
  807. [ 1.681513] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: 12 num_Rx:32 num_Tx:18, node:576, threshold:30, gloved sensitivity:83
  808. [ 1.681879] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: jitter filter strenth = 75, glove jitter filter strenght = 200
  809. [ 1.682515] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F54 found (page 1): INT_SRC[01] BASE_ADDRS[00,0D,33,34]
  810. [ 1.683505] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F55 found (page 3): INT_SRC[01] BASE_ADDRS[00,00,03,04]
  811. [ 1.684134] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 found (page 4): INT_SRC[41] BASE_ADDRS[00,16,00,49]
  812. [ 1.684405] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: f51 query feature feature1:51, feature2:3
  813. [ 1.684645] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: edge_swipe: 0409, detection_flag2 : 0405
  814. [ 1.684652] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: sidekey_threshold addr : 0000, stylus_enable_addr : 0000
  815. [ 1.686714] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
  816. [ 1.687750] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: [s5050] package_id is 5050, package_rev is 1
  817. [ 1.687948] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
  818. [ 1.687955] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
  819. [ 1.687962] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[41] NUM_INT_REG[00] INT_MASK[20]
  820. [ 1.687968] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
  821. [ 1.688407] input: sec_touchscreen as /devices/f9924000.i2c/i2c-2/2-0020/input/input4
  822. [ 1.688416] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_input_open
  823. [ 1.688422] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_start_device already power on
  824. [ 1.694837] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID] [0x0000 0x0000, s5050]
  825. [ 1.695060] synaptics_rmi4_i2c 2-0020: fwu_read_f34_queries: F34 Query : ID: V606
  826. [ 1.700732] synaptics_rmi4_i2c 2-0020: rmidb_scan_pdt: Failed to find FDB
  827. [ 1.701301] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_s5050_h.fw
  828. [ 1.701311] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: [FW size, version] [95744, 0xA030/0xA030(BIN/IC), prog bit[0]
  829. [ 1.701318] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: Do not need to update
  830. [ 1.701871] qcom,qpnp-rtc qpnp-rtc-17: rtc core: registered qpnp_rtc as rtc0
  831. [ 1.701952] qcom,qpnp-rtc qpnp-rtc-17: Probe success !!
  832. [ 1.702093] i2c /dev entries driver
  833. [ 1.703594] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
  834. [ 1.703600] msm_vidc: 1: no elements in frequency table
  835. [ 1.703605] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
  836. [ 1.703661] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
  837. [ 1.703668] msm_vidc: 1: Q6 hfi device probe called
  838. [ 1.703869] msm_vidc: 1: debugfs_create_file: fail
  839. [ 1.704292] msm_probe : Succeed!
  840. [ 1.704711] cam_dummy_init_module:182
  841. [ 1.704790] cam_dummy_platform_probe:87
  842. [ 1.706029] msm_cci_probe : Succeed!
  843. [ 1.710768] msm_camera_request_gpio_table:551 invalid gpio_tbl (null) / size 0
  844. [ 1.710895] msm_camera_config_single_vreg enable cam_vio
  845. [ 1.713267] msm_eeprom_match_id: read 0xf8 0x14, check 0xf8 0x14
  846. [ 1.714901] msm_eeprom_verify_sum: checksum pass 0x3342464e
  847. [ 1.714911] msm_eeprom_verify_sum: checksum pass 0xa3667065
  848. [ 1.714916] msm_eeprom_verify_sum: checksum pass 0xd62aab37
  849. [ 1.714925] msm_eeprom_verify_sum: checksum pass 0xea025e4
  850. [ 1.714930] msm_camera_config_single_vreg disable cam_vio
  851. [ 1.717187] msm_camera_request_gpio_table:551 invalid gpio_tbl (null) / size 0
  852. [ 1.717320] msm_eeprom_spi_setup success result=0 supported=1f X
  853. [ 1.717502] MSM-SENSOR-DRIVER msm_sensor_driver_init:638 msm_sensor_driver_init : Enter
  854. [ 1.718326] MSM-SENSOR-DRIVER msm_sensor_driver_parse:615 g_sctrl[0] ea37a500
  855. [ 1.718764] MSM-SENSOR-DRIVER msm_sensor_driver_parse:615 g_sctrl[2] ea37a600
  856. [ 1.718779] MSM-SENSOR-DRIVER msm_sensor_driver_init:642 probe success
  857. [ 1.720237] __msm_jpeg_init:895] Jpeg Device id 0
  858. [ 1.720466] __msm_jpeg_init:895] Jpeg Device id 1
  859. [ 1.720698] __msm_jpeg_init:895] Jpeg Device id 2
  860. [ 1.724218] wacom_g5sp_i2c 6-0056: wacom_i2c_resume_work
  861. [ 1.735468] MSM-CPP cpp_init_hardware:809 stream_cnt:0
  862. [ 1.735527] MSM-CPP cpp_init_hardware:832 cpp_dbg: end of cpp_init_hardware
  863. [ 1.736743] lirc_dev: IR Remote Control driver registered, major 231
  864. [ 1.736749] IR NEC protocol handler initialized
  865. [ 1.736753] IR RC5(x) protocol handler initialized
  866. [ 1.736758] IR RC6 protocol handler initialized
  867. [ 1.736762] IR JVC protocol handler initialized
  868. [ 1.736766] IR Sony protocol handler initialized
  869. [ 1.736770] IR RC5 (streamzap) protocol handler initialized
  870. [ 1.736774] IR SANYO protocol handler initialized
  871. [ 1.736778] IR MCE Keyboard/mouse protocol handler initialized
  872. [ 1.736783] IR LIRC bridge handler initialized
  873. [ 1.736787] gspca_main: v2.14.0 registered
  874. [ 1.736837] usbcore: registered new interface driver uvcvideo
  875. [ 1.736842] USB Video Class driver (1.1.1)
  876. [ 1.787286] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  877. [ 1.787341] Bluetooth: BlueSleep Mode Driver Ver 1.1
  878. [ 1.787515] bluesleep probe
  879. [ 1.787517] [BT]
  880. [ 1.787655] configure input direction
  881. [ 1.787657] [BT]
  882. [ 1.788435] cpuidle: using governor ladder
  883. [ 1.788441] cpuidle: using governor menu
  884. [ 1.788461] sdhci: Secure Digital Host Controller Interface driver
  885. [ 1.788465] sdhci: Copyright(c) Pierre Ossman
  886. [ 1.788729] msmsdcc_populate_pdata: before parsing vendor_type
  887. [ 1.788735] msmsdcc_populate_pdata: vendor_type=4
  888. [ 1.788850] mmc0: SDCC Version: 0x00000038
  889. [ 1.791601] mmc0: bam physical base=0xf9884000
  890. [ 1.791605] mmc0: bam virtual base=0xc6f38000
  891. [ 1.791615] sps:BAM 0xf9884000 is registered.
  892. [ 1.791619] mmc0: BAM device registered. bam_handle=0xe9d53e00
  893. [ 1.795173] sps:BAM 0xf9884000 (va:0xc6f38000) enabled: ver:0x6, number of pipes:6
  894. [ 1.798747] mmc0: Qualcomm MSM SDCC-BAM at [mem 0xf9884000-0xf988afff flags 0x200] [irq 252 flags 0x400]
  895. [ 1.798772] mmc0: Qualcomm MSM SDCC-DML [mem 0xf98a4800-0xf98a48ff flags 0x200]
  896. [ 1.798797] brcm_wifi_status:462 status 0
  897. [ 1.798802] brcm_wifi_status_register: callback is c0864fb8, devid is ea2e3400
  898. [ 1.802003] mmc0: Qualcomm MSM SDCC-core [mem 0xf98a4000-0xf98a47ff flags 0x200] [irq 157 flags 0x400],0 dma -1 dmacrcri -1
  899. [ 1.802009] mmc0: Controller capabilities: 0x00007ffe
  900. [ 1.802014] mmc0: 8 bit data mode disabled
  901. [ 1.802018] mmc0: 4 bit data mode enabled
  902. [ 1.802021] mmc0: polling status mode disabled
  903. [ 1.802026] mmc0: MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
  904. [ 1.802030] mmc0: Slot eject status = 1
  905. [ 1.802034] mmc0: Power save feature enable = 1
  906. [ 1.802038] mmc0: SPS-BAM data transfer mode available
  907. [ 1.802364] sdhci-pltfm: SDHCI platform and OF driver helper
  908. [ 1.802650] sdhci_msm_populate_pdata: before parsing vendor_type
  909. [ 1.805191] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
  910. [ 1.805501] sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
  911. [ 1.805755] mmc1: id 1
  912. [ 1.806848] mmc1: no vmmc regulator found
  913. [ 1.808951] mmc1: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
  914. [ 1.809481] sdhci_msm_populate_pdata: before parsing vendor_type
  915. [ 1.813542] mmc2: id 3
  916. [ 1.813600] sdhci_msm_probe : Change sysfs Card Detect
  917. [ 1.814656] mmc2: no vmmc regulator found
  918. [ 1.816759] mmc2: SDHCI controller on msm_sdcc.3 [msm_sdcc.3] using ADMA
  919. [ 1.817266] Registered led device: led:rgb_red
  920. [ 1.817485] Registered led device: led:rgb_green
  921. [ 1.817725] Registered led device: led:rgb_blue
  922. [ 1.818106] Registered led device: led:flash_0
  923. [ 1.818433] Registered led device: led:flash_1
  924. [ 1.818526] Registered led device: led:flash_torch
  925. [ 1.819147] Registered led device: wled:backlight
  926. [ 1.819379] Registered led device: leds-sec1
  927. [ 1.822302] Registered led device: torch-sec1
  928. [ 1.825439] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
  929. [ 1.825445] QCE50: __qce_get_device_tree_data: ce-device =0x0
  930. [ 1.825463] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  931. [ 1.825468] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6fc0000
  932. [ 1.825473] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  933. [ 1.825477] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  934. [ 1.825670] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
  935. [ 1.825677] qce qcedev.0: CE device = 0x0
  936. [ 1.825679] , IO base, CE = 0xc6fc0000
  937. [ 1.825681] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  938. [ 1.825683] IO base BAM = 0x0
  939. [ 1.825684] BAM IRQ 268
  940. [ 1.825685] Engines Availability = 0x1010853
  941. [ 1.825715] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg7fff004
  942. [ 1.825723] sps:BAM 0xfd444000 is registered.
  943. [ 1.826377] sps:BAM 0xfd444000 (va:0xc71a0000) enabled: ver:0x20, number of pipes:8
  944. [ 1.827079] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
  945. [ 1.827195] qcedev: FIPS140-2 Known Answer Tests : Skipped
  946. [ 1.827592] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
  947. [ 1.827598] QCE50: __qce_get_device_tree_data: ce-device =0x0
  948. [ 1.827623] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  949. [ 1.827628] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc71c0000
  950. [ 1.827633] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  951. [ 1.827638] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  952. [ 1.831067] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  953. [ 1.831079] QCE50: __qce_init_clk: Unable to get CE core clk
  954. [ 1.831193] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
  955. [ 1.831286] qcrypto: probe of fd440000.qcom,qcrypto failed with error -2
  956. [ 1.831305] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
  957. [ 1.831310] QCE50: __qce_get_device_tree_data: ce-device =0x1
  958. [ 1.831324] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
  959. [ 1.831329] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc7340000
  960. [ 1.831334] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
  961. [ 1.831339] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
  962. [ 1.831602] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
  963. [ 1.831614] QCE50: __qce_init_clk: Unable to get CE core clk
  964. [ 1.831724] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
  965. [ 1.831804] qcrypto: probe of fd440000.qcom,qcrypto1 failed with error -2
  966. [ 1.833200] Successfully registered hid_synaptics_driver
  967. [ 1.833241] usbcore: registered new interface driver usbhid
  968. [ 1.833245] usbhid: USB HID core driver
  969. [ 1.833734] ashmem: initialized
  970. [ 1.833845] logger: created 2048K log 'log_main'
  971. [ 1.833903] logger: created 512K log 'log_events'
  972. [ 1.833961] logger: created 2048K log 'log_radio'
  973. [ 1.833982] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
  974. [ 1.834165] logger: created 512K log 'log_system'
  975. [ 1.834171] sec_getlog_supply_loggerinfo: 0xc15a0eec 0xc17a0eec 0xc19a0eec 0xc1a20eec
  976. [ 1.834741] sps:BAM 0xf9304000 is registered.
  977. [ 1.834757] sps:BAM 0xf9a44000 is registered.
  978. [ 1.834764] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
  979. [ 1.835040] qcom,qpnp-power-on qpnp-power-on-7: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'warm' boot
  980. [ 1.835057] qcom,qpnp-power-on qpnp-power-on-7: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  981. [ 1.835207] input: qpnp_pon as /devices/virtual/input/input5
  982. [ 1.836056] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
  983. [ 1.836607] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
  984. [ 1.836688] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
  985. [ 1.837077] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
  986. [ 1.837197] fuelgauge_parse_dt reading fg_irq = 433
  987. [ 1.837318] fuelgauge_parse_dt reading bat_int_gpio = 407
  988. [ 1.837326] fuelgauge_parse_dt: fg_irq: 433, calculation_type: 0x17, fuel_alert_soc: 2,
  989. [ 1.837329] repeated_fuelalert: 0
  990. [ 1.837333] board_fuelgauge_init : assign battery data
  991. [ 1.837340] board_fuelgauge_init: RCOMP0: 0x62, RCOMP_charging: 0x7c, temp_cohot: -1000, temp_cocold: -4350, is_using_model_data: 1, type_str: SDI, capacity_max: 990, capacity_max_margin: 50, capacity_min: -7,
  992. [ 1.838071] sec-fuelgauge 19-0036: MAX17048 Fuel-Gauge Ver 0x0012
  993. [ 1.838778] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  994. [ 1.839560] sec_hal_fg_get_property: Fail to get psy (battery)
  995. [ 1.839670] max17048_get_current: Fail to get psy (sec-charger)
  996. [ 1.839732] max17048_get_current_average: Fail to get psy (sec-charger)
  997. [ 1.839793] max17048_get_current_average: Fail to get psy (battery)
  998. [ 1.841316] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  999. [ 1.842027] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1000. [ 1.842033] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1001. [ 1.842038] sec-fuelgauge 19-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 36)
  1002. [ 1.842104] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1003. [ 1.842987] sec_hal_fg_get_property: Fail to get psy (battery)
  1004. [ 1.843120] max17048_get_current: Fail to get psy (sec-charger)
  1005. [ 1.843193] max17048_get_current_average: Fail to get psy (sec-charger)
  1006. [ 1.843326] max17048_get_current_average: Fail to get psy (battery)
  1007. [ 1.844855] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1008. [ 1.845626] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1009. [ 1.845632] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1010. [ 1.845638] sec-fuelgauge 19-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 36)
  1011. [ 1.845775] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1012. [ 1.847258] sec-fuelgauge 19-0036: sec_fuelgauge_probe: fg_irq = 628
  1013. [ 1.847395] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
  1014. [ 1.847431] func:max77803_charger_init
  1015. [ 1.847630] max77803_charger_probe: MAX77803 Charger driver probe
  1016. [ 1.847783] sec_charger_parse_dt use bat irq -22
  1017. [ 1.847788] max77803-charger max77803-charger: max77803_charger_probe : Failed to get charger int
  1018. [ 1.848801] max77803_irq_thread: interrupt source(0x01)
  1019. [ 1.849157] max77803_irq_thread: charger interrupt(0x40)
  1020. [ 1.851909] max77803_charger_initialize: battery cv voltage 0xdd
  1021. [ 1.852266] max77803_charger_probe: device found: ver.0x4
  1022. [ 1.852728] max77803_get_charger_state: CHG_DTLS : 0x 1
  1023. [ 1.853088] max77803_get_health_state: reg_data(0x3)
  1024. [ 1.853094] max77803_get_health_state: Fail to get psy (battery)
  1025. [ 1.853507] max77803_get_vbus_state: Fail to get psy (battery)
  1026. [ 1.854332] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1027. [ 1.854692] sec_chg_get_property: reg_data(93)
  1028. [ 1.855052] max77803_get_input_current: CHG_CNFG_09(0x12)
  1029. [ 1.855452] sec_chg_get_property: reg_data(93)
  1030. [ 1.855814] max77803_get_charger_state: CHG_DTLS : 0x 1
  1031. [ 1.856172] max77803_get_health_state: reg_data(0x3)
  1032. [ 1.856178] max77803_get_health_state: Fail to get psy (battery)
  1033. [ 1.856599] max77803_get_vbus_state: Fail to get psy (battery)
  1034. [ 1.857430] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1035. [ 1.857824] sec_chg_get_property: reg_data(93)
  1036. [ 1.858564] max77803_get_input_current: CHG_CNFG_09(0x12)
  1037. [ 1.859678] [VIB]: ss_vibrator_probe
  1038. [ 1.859699] vibrator_parse_dt:462, changed_chip not specified
  1039.  
  1040. [ 1.862202] #####################################################
  1041. [ 1.862889] input: pressure_sensor as /devices/virtual/input/input6
  1042. [ 1.863021] input: gesture_sensor as /devices/virtual/input/input7
  1043. [ 1.863145] input: light_sensor as /devices/virtual/input/input8
  1044. [ 1.863274] input: proximity_sensor as /devices/virtual/input/input9
  1045. [ 1.863388] input: temp_humidity_sensor as /devices/virtual/input/input10
  1046. [ 1.863504] input: sig_motion_sensor as /devices/virtual/input/input11
  1047. [ 1.863620] input: step_cnt_sensor as /devices/virtual/input/input12
  1048. [ 1.863737] input: meta_event as /devices/virtual/input/input13
  1049. [ 1.865530] [SSP]: requesting IRQ 622
  1050. [ 1.866148] [SSP] ssp_enable, enable = 1, old enable = 1
  1051. [ 1.866158] [SSP] change_rev = 1
  1052. [ 1.872276] [SSP] MCU Firm Rev : Old = 15041500, New = 15041500
  1053. [ 1.882795] [SSP] MCU device ID = 85, reading ID = 85
  1054. [ 1.882801] [SSP] Sensor Posision A : 6, G : 6, M: 3
  1055. [ 1.897636] [SSP]: get_sensor_scanning_info - 0 3 255 255
  1056. [ 1.903850] input: ssp_context as /devices/virtual/input/input14
  1057. [ 1.904023] [SSP]: ssp_probe - setup debuglevel 0!
  1058. [ 1.904028] [SSP]: ssp_probe - probe success!
  1059. [ 1.904034] #####################################################
  1060.  
  1061. [ 1.904216] usbcore: registered new interface driver snd-usb-audio
  1062. [ 1.905300] +[ES325]=es325_init()
  1063. [ 1.905383] =[ES325]=es325_init(): slim_driver_register()
  1064. [ 1.905404] -[ES325]=es325_init()
  1065. [ 1.912323] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  1066. [ 1.912983] platform qcom,msm-voip-dsp.53: Driver msm-voip-dsp requests probe deferral
  1067. [ 1.913321] platform qcom,msm-pcm-voice.54: Driver msm-pcm-voice requests probe deferral
  1068. [ 1.915446] ocmem: Notifier registered for 5
  1069. [ 1.915960] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1070. [ 1.916026] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1071. [ 1.917246] oprofile: using arm/armv7-krait
  1072. [ 1.917308] Mirror/redirect action on
  1073. [ 1.917315] u32 classifier
  1074. [ 1.917318] Actions configured
  1075. [ 1.917325] Netfilter messages via NETLINK v0.30.
  1076. [ 1.917344] nfnl_acct: registering with nfnetlink.
  1077. [ 1.917374] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  1078. [ 1.917620] ctnetlink v0.93: registering with nfnetlink.
  1079. [ 1.917646] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1080. [ 1.917651] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1081. [ 1.917824] xt_time: kernel timezone is -0000
  1082. [ 1.917837] 939-23012-001-quicksec-vpnclient-for-android-3.5-4155-1a877303f36b-4155
  1083. [ 1.917842] vpnclient kernel spd loaded.
  1084. [ 1.918013] ip_tables: (C) 2000-2006 Netfilter Core Team
  1085. [ 1.918152] arp_tables: (C) 2002 David S. Miller
  1086. [ 1.918187] TCP: cubic registered
  1087. [ 1.918192] Initializing XFRM netlink socket
  1088. [ 1.918379] NET: Registered protocol family 10
  1089. [ 1.919614] Mobile IPv6
  1090. [ 1.919633] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1091. [ 1.919732] IPv6 over IPv4 tunneling driver
  1092. [ 1.919976] NET: Registered protocol family 17
  1093. [ 1.919995] NET: Registered protocol family 15
  1094. [ 1.920032] Bridge firewalling registered
  1095. [ 1.920042] Ebtables v2.0 registered
  1096. [ 1.920763] Registering SWP/SWPB emulation handler
  1097. [ 1.925764] sec_debug_subsys_init: msm_shared_ram_phys=fa00000 SMEM_ID_VENDOR2=136 size=8780
  1098. [ 1.925778] sec_debug_subsys_init: krait(fa1b330) rpm(fa1bbf8) modem(fa1c46c) dsps(fa1cce0)
  1099. [ 1.925788] **** secdbg_log or secdbg_paddr is not initialized ****
  1100. [ 1.926809] ethernet_phy: disabling
  1101. [ 1.926817] gdsc_oxili_gx: disabling
  1102. [ 1.926831] gdsc_venus: disabling
  1103. [ 1.926912] gpiochip_add: registered GPIOs 300 to 315 on device: ice-fpga-gpio
  1104. [ 1.927377] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1105. [ 1.927475] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1106. [ 1.927999] gpio_request: gpio-425 (usb2_otg_sw) status -16
  1107. [ 1.928006] reg-fixed-voltage regulator-tpd4s214.99: Could not obtain regulator enable GPIO 425: -16
  1108. [ 1.928119] reg-fixed-voltage: probe of regulator-tpd4s214.99 failed with error -16
  1109. [ 1.928417] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1110. [ 1.928591] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1111. [ 1.928937] sec_jack_probe : Registering jack driver
  1112. [ 1.928963] sec_jack_populate_dt_pdata : earjack-detect-gpio =429
  1113. [ 1.928978] sec_jack_populate_dt_pdata : earjack-sendend-gpio =77
  1114. [ 1.929000] sec_jack_populate_dt_pdata : earjack-micbias-gpio =441
  1115. [ 1.929022] sec_jack_populate_dt_pdata : earjack-fsa_en-gpio =418
  1116. [ 1.929089] sec_jack_populate_dt_pdata : 4, 3, 10000, 10, 0
  1117. [ 1.929146] sec_jack_populate_dt_pdata : 4, 936, 10000, 10, 0
  1118. [ 1.929226] sec_jack_populate_dt_pdata : 4, 2400, 10000, 10, 1
  1119. [ 1.929332] sec_jack_populate_dt_pdata : 4, 9999, 10000, 10, 1
  1120. [ 1.929363] sec_jack_populate_dt_pdata : 3, 0, 0, 162
  1121. [ 1.929419] sec_jack_populate_dt_pdata : 3, 1, 163, 325
  1122. [ 1.929499] sec_jack_populate_dt_pdata : 3, 2, 326, 645
  1123. [ 1.929505] sec_jack_populate_dt_pdata - mpp-channel-scaling - 4 1 3
  1124. [ 1.929829] sec_jack_detect_work: detect_irq(0)
  1125. [ 1.930102] mpp_control : mpp diable =======
  1126. [ 1.930347] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1127. [ 1.930527] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1128. [ 1.931760] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1129. [ 1.931933] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1130. [ 1.932462] gpio-keys gpio_keys.97: [Keys] no regulator: ignoring
  1131. [ 1.932549] gpio-keys gpio_keys.97: gpio_keys_get_devtree_pdata: label:home_key, gpio:410, code:172, type:1, debounce:15
  1132. [ 1.932576] gpio-keys gpio_keys.97: gpio_keys_get_devtree_pdata: label:volume_down, gpio:409, code:114, type:1, debounce:15
  1133. [ 1.932602] gpio-keys gpio_keys.97: gpio_keys_get_devtree_pdata: label:volume_up, gpio:412, code:115, type:1, debounce:15
  1134. [ 1.932626] gpio-keys gpio_keys.97: [Hall_IC] device tree was founded
  1135. [ 1.932702] gpio_set_debounce: gpio-410 status -22
  1136. [ 1.932825] gpio_set_debounce: gpio-409 status -22
  1137. [ 1.932945] gpio_set_debounce: gpio-412 status -22
  1138. [ 1.933135] input: gpio-keys as /devices/gpio_keys.97/input/input15
  1139. [ 1.933144] [HALL_IC] : gpio_keys_open
  1140. [ 1.933363] gpio_keys_gpio_report_event: home_key key is released
  1141. [ 1.933370] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
  1142. [ 1.933521] gpio_keys_gpio_report_event: volume_down key is released
  1143. [ 1.933527] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
  1144. [ 1.933596] gpio_keys_gpio_report_event: volume_up key is released
  1145. [ 1.933601] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
  1146. [ 1.933993] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1147. [ 1.934169] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1148. [ 1.934419] qcom,qpnp-rtc qpnp-rtc-17: setting system clock to 2014-01-05 14:36:28 UTC (1388932588)
  1149. [ 1.934425] Driver for 1-wire Dallas network protocol.
  1150. [ 1.934634] mmc1: BKOPS_EN bit = 0
  1151.  
  1152. [ 1.934702] w1_gpio_msm_probe start
  1153. [ 1.934911] input: w1 as /devices/onewire.88/input/input16
  1154. [ 1.935013] w1_uevent master_dev name = w1_bus_master1
  1155. [ 1.935379] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1156. [ 1.935551] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1157. [ 1.935609] w1_add_master_device : W1 thread will start
  1158. [ 1.936202] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1159. [ 1.936371] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1160. [ 1.936654] msm_thermal:interrupt_mode_init Interrupt mode init
  1161. [ 1.938458] sec_bat_parse_dt reading bat_int_gpio = 407
  1162. [ 1.938469] sec_bat_parse_dt: ta_irq_attr is Empty
  1163. [ 1.938480] sec_bat_parse_dt: chg_temp_check: 0
  1164. [ 1.938520] expired time is empty
  1165. [ 1.938525] expired time is empty
  1166. [ 1.938530] standard_curr is empty
  1167. [ 1.938535] sec_bat_parse_dt: chg_float_voltage is Empty
  1168. [ 1.938541] sec_bat_parse_dt: chg_float_voltage is Empty
  1169. [ 1.938546] sec_bat_parse_dt: swelling high temp block is Empty
  1170. [ 1.938553] sec_bat_parse_dt: swelling high temp recovery is Empty
  1171. [ 1.938559] sec_bat_parse_dt: swelling low temp block is Empty
  1172. [ 1.938565] sec_bat_parse_dt: swelling low temp recovery is Empty
  1173. [ 1.938571] sec_bat_parse_dt: swelling low temp block is Empty
  1174. [ 1.938576] sec_bat_parse_dt: swelling low temp recovery is Empty
  1175. [ 1.938582] sec_bat_parse_dt: swelling_low_temp_current is Empty, Defualt value 600mA
  1176. [ 1.938589] sec_bat_parse_dt: swelling_low_temp_topoff is Empty, Defualt value 200mA
  1177. [ 1.938595] sec_bat_parse_dt: swelling_low_temp_current is Empty, Defualt value 1300mA
  1178. [ 1.938601] sec_bat_parse_dt: swelling_high_temp_topoff is Empty, Defualt value 200mA
  1179. [ 1.938608] sec_bat_parse_dt: swelling_wc_high_temp_current is Empty, Defualt value 600mA
  1180. [ 1.938614] sec_bat_parse_dt: swelling_wc_low_temp_current is Empty, Defualt value 600mA
  1181. [ 1.938621] sec_bat_parse_dt: swelling drop float voltage is Empty, Default value 4250mV
  1182. [ 1.938628] sec_bat_parse_dt: swelling_high_rechg_voltage is Empty
  1183. [ 1.938634] sec_bat_parse_dt: swelling_low_rechg_voltage is Empty
  1184. [ 1.938641] sec_bat_parse_dt : SWELLING_HIGH_TEMP(0) SWELLING_HIGH_TEMP_RECOVERY(0)
  1185. [ 1.938644] SWELLING_LOW_TEMP_1st(0) SWELLING_LOW_TEMP_RECOVERY_1st(0) SWELLING_LOW_TEMP_2nd(0) SWELLING_LOW_TEMP_RECOVERY_2nd(0) SWELLING_LOW_CURRENT(600, 200), SWELLING_HIGH_CURRENT(1300, 200)
  1186. [ 1.938769] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 4
  1187. [ 1.938771] cable_source_type : 1, use_wireless_to_pogo : 0, event_waiting_time : 600
  1188. [ 1.938774] polling_type : 1, initial_count : 3, check_count : 0
  1189. [ 1.938776] check_adc_max : 1440, check_adc_min : 0
  1190. [ 1.938778] ovp_uvlo_check_type : 3, thermal_source : 2
  1191. [ 1.938780] temp_check_type : 2, temp_check_count : 1
  1192. [ 1.938786] board_battery_init : assign temp adc table
  1193. [ 1.938792] sec_battery_probe : SWELLING_HIGH_TEMP(450) SWELLING_HIGH_TEMP_RECOVERY(400)
  1194. [ 1.938795] SWELLING_LOW_TEMP(100) SWELLING_LOW_TEMP_RECOVERY(150)
  1195. [ 1.938797] SWELLING_HIGH_CHG_CURRENT(0) SWELLING_LOW_CHG_CURRENT(0)
  1196. [ 1.943238] sec_hal_fg_get_property: Fail to get psy (battery)
  1197. [ 1.943672] max77803_get_input_current: CHG_CNFG_09(0x12)
  1198. [ 1.944062] max77803_get_input_current: CHG_CNFG_09(0x12)
  1199. [ 1.944068] max17048_get_current_average: Fail to get psy (battery)
  1200. [ 1.945730] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1201. [ 1.948241] mmc1: sdhci_msm_execute_tuning: data error (-84)
  1202. [ 1.951031] mmc1: sdhci_msm_execute_tuning: data error (-84)
  1203. [ 1.951193] mmc1: new HS200 MMC card at address 0001
  1204. [ 1.951422] [mmc_blk_probe]mmcblk0: mmc1:0001 MBG4GC 29.1 GiB , card->type:0
  1205. [ 1.951541] mmcblk0rpmb: mmc1:0001 MBG4GC partition 3 512 KiB
  1206. [ 1.954085] GPT:partition_entry_array_crc32 values don't match: 0x37b80bc5 != 0x75db954b
  1207. [ 1.954091] GPT: Use GNU Parted to correct GPT errors.
  1208. [ 1.954143] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26
  1209. [ 1.956777] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1210. [ 1.956972] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1211. [ 1.972969] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31802)
  1212. [ 1.973685] max17048_rcomp_update: Fail to get psy (battery)
  1213. [ 1.974333] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1214. [ 1.975044] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1215. [ 1.975051] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1216. [ 1.975060] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3691mV),Inow(450mA),Imax(0mA),SOC(36%),Tbat(351),is_hc_usb(0)
  1217. [ 1.975471] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1218. [ 1.975520] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1219. [ 1.975531] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1220. [ 1.975948] cable_initial_check : current_cable_type : (1)
  1221. [ 1.976309] sec_chg_get_property: reg_data(93)
  1222. [ 1.976315] cable_initial_check: ta_int_gpio is 0 or not assigned yet(cable_type(1))
  1223. [ 1.980951] sec_bat_check_cable_result_callback set ldo on
  1224. [ 1.980981] 8941_l11: Failed to create debugfs directory
  1225. [ 1.981068] max77803_get_input_current: CHG_CNFG_09(0x12)
  1226. [ 1.981432] max77803_get_input_current: CHG_CNFG_09(0x12)
  1227. [ 1.981826] sec_bat_check_cable_result_callback set ldo off
  1228. [ 1.981840] 8941_l11: Failed to create debugfs directory
  1229. [ 1.982331] sec-battery battery.95: sec_battery_probe: SEC Battery Driver Loaded
  1230. [ 1.982582] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1231. [ 1.982760] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1232. [ 1.982851] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1233. [ 1.983059] clock_late_init: Removing enables held for handed-off clocks
  1234. [ 1.988535] dhd_module_init in
  1235. [ 1.988752] found wifi platform device bcmdhd_wlan
  1236. [ 1.989130] Power-up adapter 'DHD generic adapter'
  1237. [ 1.989151] wifi_platform_set_power = 1
  1238. [ 1.989155] ------------------------------------------------
  1239. [ 1.989159] ------------------------------------------------
  1240. [ 1.989164] brcm_wlan_power Enter: power on
  1241. [ 1.989173] [brcm_wlan_power] Bluetooth Power On.
  1242. [ 2.005785] hostwake line change [BT]
  1243. [ 2.005863] bluesleep_sleep_work - uport is null [BT]
  1244. [ 2.009114] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31801)
  1245. [ 2.010085] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1246. [ 2.011058] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1247. [ 2.011065] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1248. [ 2.011072] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3691mV),Inow(-450mA),Imax(0mA),SOC(36%),Tbat(351),is_hc_usb(0)
  1249. [ 2.011080] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1250. [ 2.011088] sec-battery battery.95: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
  1251. [ 2.024235] wacom_g5sp_i2c 6-0056: pen_insert_work: pen instert
  1252. [ 2.040876] WL_REG_ON on-step : [0]
  1253. [ 2.040885] WL_REG_ON on-step-2 : [1]
  1254. [ 2.136931] mmc2: new high speed SDHC card at address 5048
  1255. [ 2.137138] [mmc_blk_probe]mmcblk1: mmc2:5048 SD32G 28.9 GiB , card->type:1
  1256. [ 2.139045] mmcblk1: p1
  1257. [ 2.139487] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1258. [ 2.139671] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1259. [ 2.170890] [brcm_wlan_power] BT_REG_OFF.
  1260. [ 2.220894] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1261. [ 2.220926] msm_thermal:msm_therm_temp_log (0 --- 51)(1 --- 48)(2 --- 45)(3 --- 48)(4 --- 50)(5 --- 52)(6 --- 52)(7 --- 51)(8 --- 52)(9 --- 48)(10 --- 45)wifi_platform_bus_enumerate device present 1
  1262. [ 2.374225] brcm_wifi_status:462 status 1
  1263. [ 2.374230] mmc0: Slot status change detected (0 -> 1)
  1264. [ 2.422987] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  1265. [ 2.425671] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  1266. [ 2.427166] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  1267. [ 2.430906] [keys] flip_cover_work : 0 code 0x0
  1268. [ 2.484073] sps:BAM 0xf9884000 (va:0xc6f38000) enabled: ver:0x6, number of pipes:6
  1269. [ 2.490593] sps:BAM 0xf9884000 (va:0xc6f38000) enabled: ver:0x6, number of pipes:6
  1270. [ 2.497364] msmsdcc_execute_tuning : set tuning_done ture.
  1271. [ 2.500025] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
  1272. [ 2.500058] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  1273. [ 2.500493] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1274. [ 2.500669] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1275. [ 2.516436] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1276. [ 2.516497] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1277. [ 2.516502] bus num (host idx)=0, slot num (rca)=1
  1278. [ 2.516506] found adapter info 'DHD generic adapter'
  1279. [ 2.516523] alloc static buf at ea740000!
  1280. [ 2.516685] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1281. [ 2.516887] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1282. [ 2.521731] F1 signature OK, socitype:0x1 chip:0x4339 rev:0x1 pkg:0x0
  1283. [ 2.522487] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  1284. [ 2.522859] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xeaf035fc
  1285. [ 2.522873] wl_create_event_handler(): thread:wl_event_handler:420 started
  1286. [ 2.523285] p2p0: P2P Interface Registered
  1287. [ 2.523352] dhd_attach(): thread:dhd_watchdog_thread:421 started
  1288. [ 2.523433] dhd_attach(): thread:dhd_dpc:422 started
  1289. [ 2.523496] dhd_attach(): thread:dhd_rxf:423 started
  1290. [ 2.523504] dhd_deferred_work_init: work queue initialized
  1291. [ 2.523799] Dongle Host Driver, version 1.141.64.59 (security_patch)
  1292. [ 2.523802] Compiled in drivers/net/wireless/bcmdhd on Aug 20 2022 at 17:14:06
  1293. [ 2.524056] Register interface [wlan0] MAC: 00:40:15
  1294.  
  1295. [ 2.524078] CFG80211-INFO2) wl_event_handler : was terminated
  1296. [ 2.524098] wl_destroy_event_handler(): thread:wl_event_handler:420 terminated OK
  1297. [ 2.524104] dhd_prot_ioctl : bus is down. we have nothing to do
  1298. [ 2.524109] dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
  1299. [ 2.524230] wifi_platform_set_power = 0
  1300. [ 2.524235] ------------------------------------------------
  1301. [ 2.524239] ------------------------------------------------
  1302. [ 2.524244] brcm_wlan_power Enter: power off
  1303. [ 2.528427] WL_REG_ON off-step : [1]
  1304. [ 2.528437] WL_REG_ON off-step-2 : [0]
  1305. [ 2.631174] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1306. [ 2.631376] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1307. [ 2.631650] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
  1308. [ 2.631820] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
  1309. [ 2.631889] ALSA device list:
  1310. [ 2.631893] No soundcards found.
  1311. [ 2.631941] Warning: unable to open an initial console.
  1312. [ 2.631981] Freeing init memory: 60K
  1313. [ 3.353945] max77803_get_input_current: CHG_CNFG_09(0x12)
  1314. [ 3.354505] max77803_get_input_current: CHG_CNFG_09(0x12)
  1315. [ 3.356349] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1316. [ 3.382585] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31803)
  1317. [ 3.383518] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1318. [ 3.384467] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1319. [ 3.384473] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1320. [ 3.384481] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3803mV),Inow(-450mA),Imax(0mA),SOC(36%),Tbat(351),is_hc_usb(0)
  1321. [ 3.384489] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1322. [ 3.384497] sec-battery battery.95: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
  1323. [ 3.660893] max77803-muic max77803-muic: func:max77803_muic_init_detect
  1324. [ 3.661435] max77803-muic max77803-muic: func:max77803_muic_detect_dev CONTROL1:9
  1325. [ 3.662086] max77803-muic max77803-muic: func:max77803_muic_detect_dev irq:-1 ret:0
  1326. [ 3.662092] max77803-muic max77803-muic: max77803_muic_detect_dev: STATUS1:0x3f, 2:0x41
  1327. [ 3.662101] max77803-muic max77803-muic: adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:20
  1328. [ 3.662107] max77803-muic max77803-muic: max77803_muic_detect_dev: ATTACHED
  1329. [ 3.662113] max77803-muic max77803-muic: func:max77803_muic_handle_attach st1:3f st2:41 cable_type:20
  1330. [ 3.662121] max77803-muic max77803-muic: func:max77803_muic_attach_usb_type adc:1f cable_type:20
  1331. [ 3.662127] max77803-muic max77803-muic: max77803_muic_attach_usb_type:USB
  1332. [ 3.662132] max77803-muic max77803-muic: func:max77803_muic_set_charging_type cable_type:1: force_disable:0
  1333. [ 3.662146] max77803_muic_charger_cb: cable type : 1
  1334. [ 3.662150] max77803_muic_charger_cb: cable type for charger: cable_type(1), previous_cable_type(0)
  1335. [ 3.662158] sec-battery battery.95: sec_bat_set_property: current_cable(4), wc_status(0), wire_status(4)
  1336. [ 3.662167] max77803-muic max77803-muic: func:max77803_muic_set_usb_path path:0, cable_type:1
  1337. [ 3.662173] max77803_muic_set_safeout: MUIC safeout path=0
  1338. [ 3.663379] max77803-muic max77803-muic: max77803_muic_set_usb_path: AP_USB_MODE
  1339. [ 3.663385] max77803-muic max77803-muic: max77803_muic_set_usb_path: Set manual path
  1340. [ 3.664235] sec_bat_cable_work: Fail to sec-charger set (9=>-22)
  1341. [ 3.664299] sec_bat_check_cable_result_callback set ldo on
  1342. [ 3.664313] 8941_l11: Failed to create debugfs directory
  1343. [ 3.665235] sec_bat_set_charge: Fail to sec-charger set (6=>-22)
  1344. [ 3.665345] sec_bat_set_charge: Fail to sec-charger set (42=>-22)
  1345. [ 3.665406] sec_bat_set_charge: Fail to sec-charger set (6=>-22)
  1346. [ 3.665516] sec_bat_set_charge: Fail to sec-charger set (6=>-22)
  1347. [ 3.668242] max77803_set_charge_current: reg_data(0x8b), charge(460)
  1348. [ 3.674565] max77803_set_topoff_current: reg_data(0x24), topoff(200)
  1349. [ 3.675104] max77803-muic max77803-muic: max77803_muic_set_usb_path: CNTL1(0x09)
  1350. [ 3.675513] sec-battery battery.95: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
  1351. [ 3.675520] sec-battery battery.95: sec_bat_cable_work: Polling time is reset to 30 sec.
  1352. [ 3.676041] max77803-muic max77803-muic: max77803_muic_set_usb_path: CNTL2(0x3e)
  1353. [ 4.180285] max77803_get_input_current: CHG_CNFG_09(0x12)
  1354. [ 4.180825] max77803_get_input_current: CHG_CNFG_09(0x12)
  1355. [ 4.182681] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1356. [ 4.208897] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31804)
  1357. [ 4.210571] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1358. [ 4.211515] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1359. [ 4.211521] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1360. [ 4.211528] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3807mV),Inow(450mA),Imax(460mA),SOC(36%),Tbat(351),is_hc_usb(0)
  1361. [ 4.211535] sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
  1362. [ 4.211554] sec_bat_check_callback: Battery status(1)
  1363. [ 4.211559] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1364. [ 4.212097] max77803_get_health_state: reg_data(0x3)
  1365. [ 4.213698] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1366. [ 4.213706] sec_bat_calculate_safety_time : EXPIRED_TIME(10800000), IP(2300000), CP(0), CURR(0), STANDARD(2000)
  1367. [ 4.213714] sec-battery battery.95: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
  1368. [ 4.860924] max77803_chgin_init_work
  1369. [ 5.257200] max77803_get_input_current: CHG_CNFG_09(0x12)
  1370. [ 5.257828] max77803_get_input_current: CHG_CNFG_09(0x12)
  1371. [ 5.259805] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1372. [ 5.286114] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(351), Temp-ADC(31806)
  1373. [ 5.287076] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1374. [ 5.288084] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1375. [ 5.288093] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1376. [ 5.288104] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3765mV),Inow(450mA),Imax(460mA),SOC(36%),Tbat(351),is_hc_usb(0)
  1377. [ 5.288112] sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
  1378. [ 5.288134] sec_bat_check_callback: Battery status(1)
  1379. [ 5.288140] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1380. [ 5.288718] max77803_get_health_state: reg_data(0x3)
  1381. [ 5.290449] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1382. [ 5.290458] sec-battery battery.95: sec_bat_time_management: Charging Time : 2 secs
  1383. [ 5.290467] sec-battery battery.95: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-45), LR(0)
  1384. [ 5.290479] sec_bat_swelling_check: Fail to sec-charger get (9=>-22)
  1385. [ 5.290601] sec_bat_swelling_check: status(1), swell_mode(0:0:0), cv(0)mV, temp(351)
  1386. [ 5.290614] sec-battery battery.95: sec_bat_fullcharged_check: Charging Mode : Normal
  1387. [ 5.290622] sec_bat_calculate_safety_time : EXPIRED_TIME(10800000), IP(2300000), CP(0), CURR(460), STANDARD(2000)
  1388. [ 5.290628] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(46956521) TIME NOW(5) TIME PREV(4)
  1389. [ 5.290634] sec_bat_calculate_safety_time : REMAIN_TIME(10799769) CAL_REMAIN_TIME(46955521)
  1390. [ 5.290641] sec-battery battery.95: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
  1391. [ 5.326701] EXT3-fs (mmcblk0p26): error: couldn't mount because of unsupported optional features (40)
  1392. [ 5.328063] EXT2-fs (mmcblk0p26): error: couldn't mount because of unsupported optional features (40)
  1393. [ 5.332970] EXT4-fs (mmcblk0p26): warning: maximal mount count reached, running e2fsck is recommended
  1394. [ 5.333469] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: (null)
  1395. [ 5.500719] usb: enabled: 0, dev->enabled: 0
  1396. [ 5.501175] usb: enabled: 1, dev->enabled: 0
  1397. [ 5.501185] usb: enable_store vendor=18d1,product=1,bcdDevice=232
  1398. [ 5.501190] ,Class=0,SubClass=0,Protocol=0
  1399. [ 5.501193] usb: enable_store next cmd : usb_add_config
  1400. [ 5.501199] schedule_usb_gadget_connect_work: schedule_usb_gadget_connect_work
  1401. [ 5.504226] usb_gadget_connect_work: usb_gadget_connect_work: speaker_status: 0, speaker_check_count 0
  1402. [ 5.504570] usb: enabled: 0, dev->enabled: 1
  1403. [ 5.504579] dwc3 f9200000.dwc3: request 00000000 was not queued to ep0out
  1404. [ 5.506121] usb: enabled: 1, dev->enabled: 0
  1405. [ 5.506127] usb: enable_store f_holder->f:rndis
  1406. [ 5.506134] usb: enable_store vendor=18d1,product=d001,bcdDevice=232
  1407. [ 5.506138] ,Class=0,SubClass=0,Protocol=0
  1408. [ 5.506142] usb: enable_store next cmd : usb_add_config
  1409. [ 5.506149] rndis_function_bind_config: rndis_function_bind_config MAC: 00:00:00:00:00:00
  1410. [ 5.506168] android_usb gadget: using random self ethernet address
  1411. [ 5.506172] usb: set unique host mac
  1412. [ 5.506472] rndis0: MAC 0e:61:e5:9f:bc:03
  1413. [ 5.506477] rndis0: HOST MAC 00:00:00:00:00:00
  1414. [ 5.506528] schedule_usb_gadget_connect_work: schedule_usb_gadget_connect_work
  1415. [ 5.507555] usb_gadget_connect_work: usb_gadget_connect_work: speaker_status: 0, speaker_check_count 0
  1416. [ 5.510011] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1417. [ 5.920893] dwc3 f9200000.dwc3: dwc3_otg_init_sm: completion timeout
  1418. [ 5.926417] msm-dwc3 msm_dwc3: DWC3 in low power mode
  1419. [ 6.580870] EXT4-fs (mmcblk0p26): re-mounted. Opts: (null)
  1420. [ 6.593598] preinit: (6.58) Welcome to Sailfish OS 4.4.0.68 (Vanha Rauma)
  1421. [ 7.234251] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1422. [ 7.234285] msm_thermal:msm_therm_temp_log (0 --- 47)(1 --- 46)(2 --- 44)(3 --- 46)(4 --- 47)(5 --- 47)(6 --- 47)(7 --- 47)(8 --- 47)(9 --- 46)(10 --- 44)preinit: (8.27) set_system_time: Fri Jul 8 08:08:40 UTC 2022 : 0
  1423. [ 8.292996] preinit: (8.28) is_erase_needed: No : 0
  1424. [ 8.312008] preinit: (8.30) late.d/rich-core-preinit: : 0
  1425. [ 8.324795] preinit: (8.31) get_bootstate: USER : 0
  1426. [ 8.324970] preinit: (8.31) BOOTSTATE = USER
  1427. [ 8.327719] preinit: (8.32) Booting to default.target
  1428. [ 8.369471] systemd (1): undefined instruction: pc=b6674d66
  1429. [ 8.369479] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1430. [ 8.391113] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  1431. [ 8.391302] systemd[1]: Detected architecture arm.
  1432. [ 8.401424] systemd[1]: No hostname configured.
  1433. [ 8.401443] systemd[1]: Set hostname to <localhost>.
  1434. [ 8.434658] systemd-getty-g (1411): undefined instruction: pc=b6819d66
  1435. [ 8.434665] systemd-debug-g (1409): undefined instruction: pc=b67c7d66
  1436. [ 8.434672] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1437. [ 8.434677] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1438. [ 8.434859] systemd-fstab-g (1410): undefined instruction: pc=b683dd66
  1439. [ 8.434869] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1440. [ 8.435756] systemd-system- (1413): undefined instruction: pc=b6824d66
  1441. [ 8.435766] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1442. [ 8.441742] systemd-cryptse (1408): undefined instruction: pc=b683bd66
  1443. [ 8.441753] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1444. [ 8.444530] systemd-gpt-aut (1412): undefined instruction: pc=b6872d66
  1445. [ 8.444540] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1446. [ 8.444602] systemd-veritys (1414): undefined instruction: pc=b684dd66
  1447. [ 8.444609] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1448. [ 8.491219] systemd-gpt-auto-generator[1412]: Failed to dissect: Input/output error
  1449. [ 8.492240] systemd[1407]: /usr/lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
  1450. [ 8.504785] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  1451. [ 8.504800] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  1452. [ 8.526978] systemd[1]: /usr/lib/systemd/system/droid-reclaim-memory.service:6: Unknown lvalue 'After' in section 'Service'
  1453. [ 8.597741] systemd[1]: Unnecessary job for /dev/mmcblk0p26 was removed.
  1454. [ 8.598304] systemd[1]: Reached target Swap.
  1455. [ 8.598817] systemd[1]: Listening on Journal Socket (/dev/log).
  1456. [ 8.599110] systemd[1]: Listening on Journal Audit Socket.
  1457. [ 8.599297] systemd[1]: Listening on udev Kernel Socket.
  1458. [ 8.600198] systemd[1]: Created slice User and Session Slice.
  1459. [ 8.600501] systemd[1]: Listening on Journal Socket.
  1460. [ 8.600716] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1461. [ 8.602948] systemd[1]: Mounting Droid mount for /dev/bfqio...
  1462. [ 8.605275] systemd[1]: Mounting FFS mount...
  1463. [ 8.607668] systemd[1]: Starting Create Static Device Nodes in /dev...
  1464. [ 8.608024] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  1465. [ 8.608199] systemd[1]: Reached target Local Encrypted Volumes.
  1466. [ 8.610563] systemd[1]: Starting Remount Root and Kernel File Systems...
  1467. [ 8.610742] systemd[1]: Reached target Slices.
  1468. [ 8.611371] systemd[1]: Listening on udev Control Socket.
  1469. [ 8.613803] systemd[1]: Starting Journal Service...
  1470. [ 8.613938] systemd[1]: Reached target Login Prompts.
  1471. [ 8.614456] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1472. [ 8.616929] systemd[1]: Mounting Kernel Debug File System...
  1473. [ 8.617079] systemd[1]: Reached target Remote Encrypted Volumes.
  1474. [ 8.617886] systemd-tmpfile (1417): undefined instruction: pc=b6890d66
  1475. [ 8.617895] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1476. [ 8.620291] systemd[1]: Starting udev Coldplug all Devices...
  1477. [ 8.620356] systemd-remount (1420): undefined instruction: pc=b68a2d66
  1478. [ 8.620364] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1479. [ 8.623578] systemd[1]: Mounted Droid mount for /dev/bfqio.
  1480. [ 8.624052] systemd[1]: dev-mtp.mount: Mount process exited, code=exited status=32
  1481. [ 8.624066] systemd[1]: dev-mtp.mount: Failed with result 'exit-code'.
  1482. [ 8.626949] systemd-journal (1421): undefined instruction: pc=b67ebd66
  1483. [ 8.627004] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1484. [ 8.632850] EXT4-fs (mmcblk0p26): re-mounted. Opts: (null)
  1485. [ 8.634293] udevadm (1423): undefined instruction: pc=b674ad66
  1486. [ 8.634305] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1487. [ 8.730907] systemd[1]: Failed to mount FFS mount.
  1488. [ 8.733004] systemd[1]: Started Journal Service.
  1489. [ 8.829731] udevadm (1431): undefined instruction: pc=b6762d66
  1490. [ 8.829742] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1491. [ 8.831530] w1_uevent master_dev name = w1_bus_master1
  1492. [ 8.831550] systemd-random- (1432): undefined instruction: pc=b6855d66
  1493. [ 8.831557] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1494. [ 8.846649] journalctl (1436): undefined instruction: pc=b6815d66
  1495. [ 8.846661] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1496. [ 8.849212] systemd-udevd (1435): undefined instruction: pc=b67ead66
  1497. [ 8.849219] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1498. [ 8.933459] systemd-journald[1421]: Received request to flush runtime journal from PID 1
  1499. [ 9.833121] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1500. [ 9.834064] max77803_get_charger_state: CHG_DTLS : 0x 1
  1501. [ 9.834634] max77803_get_health_state: reg_data(0x3)
  1502. [ 9.836248] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1503. [ 9.836789] sec_chg_get_property: reg_data(93)
  1504. [ 9.837332] max77803_get_input_current: CHG_CNFG_09(0x12)
  1505. [ 9.845016] max77803_get_input_current: CHG_CNFG_09(0x12)
  1506. [ 9.845559] max77803_get_input_current: CHG_CNFG_09(0x12)
  1507. [ 9.847410] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1508. [ 9.848358] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1509. [ 9.848365] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1510. [ 9.848376] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1511. [ 9.930327] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1512. [ 9.949392] max77803_get_charger_state: CHG_DTLS : 0x 1
  1513. [ 9.949987] max77803_get_health_state: reg_data(0x3)
  1514. [ 9.951778] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1515. [ 9.952360] sec_chg_get_property: reg_data(93)
  1516. [ 9.952950] max77803_get_input_current: CHG_CNFG_09(0x12)
  1517. [ 9.971939] max77803_get_input_current: CHG_CNFG_09(0x12)
  1518. [ 9.972539] max77803_get_input_current: CHG_CNFG_09(0x12)
  1519. [ 9.974574] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1520. [ 9.975557] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1521. [ 9.975567] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1522. [ 9.975584] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1523. [ 9.979283] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1524. [ 10.070386] w1_uevent master_dev name = w1_bus_master1
  1525. [ 10.281939] udevadm (2142): undefined instruction: pc=b6749d66
  1526. [ 10.281949] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1527. [ 10.519592] max77803_get_charger_state: CHG_DTLS : 0x 1
  1528. [ 10.520159] max77803_get_health_state: reg_data(0x3)
  1529. [ 10.521915] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1530. [ 10.522473] sec_chg_get_property: reg_data(93)
  1531. [ 10.523050] max77803_get_input_current: CHG_CNFG_09(0x12)
  1532. [ 10.609039] systemd-sysctl (2357): undefined instruction: pc=b67f0d66
  1533. [ 10.609049] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1534. [ 10.674177] khhan expTimer_service 142
  1535. [ 10.674432] max77803-muic max77803-muic: func:max77803_muic_usb_detect info->muic_data->sw_path:0
  1536. [ 10.674441] max77803_muic_usb_cb: MUIC attached: 1
  1537. [ 10.674445] max77803_muic_set_safeout: MUIC safeout path=0
  1538. [ 10.675702] usb: support usb 3.0 (rev: 8)
  1539. [ 10.675708] usb: value of redrvEn: 1
  1540. [ 10.675712] usb: dwc3 power supply set(1)
  1541. [ 10.675719] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(1)
  1542. [ 10.675727] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
  1543. [ 10.714736] msm-dwc3 msm_dwc3: dwc3_resume_work
  1544. [ 10.714743] msm-dwc3 msm_dwc3: dwc3_resume_work: pm_runtime_get_sync entered
  1545. [ 10.724141] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
  1546. [ 10.875592] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
  1547. [ 10.875801] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
  1548. [ 10.904561] systemd-sysctl (2448): undefined instruction: pc=b6888d66
  1549. [ 10.904572] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1550. [ 10.915811] systemd-sysctl (2451): undefined instruction: pc=b6888d66
  1551. [ 10.915820] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1552. [ 10.975077] android_work: android_work: did not send uevent (0 0 00000000)
  1553. [ 11.113072] usb:: dwc3_gadget_reset_interrupt
  1554. [ 11.177746] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: errors=panic
  1555. [ 11.181006] usb:: dwc3_gadget_conndone_interrupt (HS)
  1556. [ 11.181023] usb: Super speed host not available
  1557. [ 11.181199] android_work: android_work: did not send uevent (0 0 00000000)
  1558. [ 11.184477] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  1559. [ 11.188204] FAT-fs (mmcblk0p2[179:2]): trying to mount...
  1560. [ 11.189788] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: data=ordered,nomblk_io_submit,noauto_da_alloc,errors=panic
  1561. [ 11.190789] FAT-fs (mmcblk0p1[179:1]): trying to mount...
  1562. [ 11.200449] FAT-fs (mmcblk0p1[179:1]): mounted successfully!
  1563. [ 11.206827] FAT-fs (mmcblk0p2[179:2]): mounted successfully!
  1564. [ 11.245013] usb: GET_DES
  1565. [ 11.245126] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1566. [ 11.248664] usb:: dwc3_gadget_reset_interrupt
  1567. [ 11.248676] usb: composite_disconnect
  1568. [ 11.248740] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1569. [ 11.312978] usb:: dwc3_gadget_conndone_interrupt (HS)
  1570. [ 11.349411] systemd-sysctl (2685): undefined instruction: pc=b6882d66
  1571. [ 11.349421] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1572. [ 11.363264] systemd-tmpfile (2695): undefined instruction: pc=b6868d66
  1573. [ 11.363275] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1574. [ 11.400965] usb: GET_DES
  1575. [ 11.401410] usb: set_config_number single config num=0
  1576. [ 11.401419] usb: set_interface_count next_interface_id=2
  1577. [ 11.401529] usb: set_config_number single config num=0
  1578. [ 11.401534] usb: set_interface_count next_interface_id=2
  1579. [ 11.402204] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1580. [ 11.402550] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1581. [ 11.402654] usb: SET_CON
  1582. [ 11.402660] usb: set_config_number single config num=0
  1583. [ 11.403134] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  1584. [ 11.403347] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1585. [ 11.442793] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
  1586. [ 11.442801] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
  1587. [ 11.442806] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
  1588. [ 11.442814] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
  1589. [ 11.620428] systemd-update- (2832): undefined instruction: pc=b67d6d66
  1590. [ 11.620437] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1591. [ 11.700189] [suspend helper] state_store: Let our helper do the real work!
  1592. [ 11.700198] [suspend helper] state_store_helper: freezer should skip me (mce:2709)
  1593. [ 11.700227] [suspend helper] suspend_helper: start!
  1594. [ 11.700242] [suspend helper] suspend_helper: result = -22
  1595. [ 11.700662] [suspend helper] state_store_helper: suspend_helper returned -22
  1596. [ 11.700710] Active wake lock:
  1597. [ 11.700717] <mce_mux> Count(1) Time(55/55) Prevent(0)
  1598. [ 11.700724] <sec-battery-vbus> Count(1) Time(8035/8035) Prevent(0)
  1599. [ 11.700734] <msm_dwc3> Count(2) Time(985/5988) Prevent(0)
  1600. [ 11.709908] mdss_fb_set_backlight: [BL1] bkl_lvl (254), bl_updated(0), power(1)
  1601. [ 11.722472] mdss_fb_set_backlight: [BL1] bkl_lvl (253), bl_updated(0), power(1)
  1602. [ 11.722496] mdss_fb_set_backlight: [BL1] bkl_lvl (254), bl_updated(0), power(1)
  1603. [ 11.795488] mdss_fb_set_backlight: [BL1] bkl_lvl (183), bl_updated(0), power(1)
  1604. [ 11.799996] mdss_fb_set_backlight: [BL1] bkl_lvl (178), bl_updated(0), power(1)
  1605. [ 11.803023] mdss_fb_set_backlight: [BL1] bkl_lvl (153), bl_updated(0), power(1)
  1606. [ 11.805261] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1607. [ 11.806276] max77803_get_charger_state: CHG_DTLS : 0x 1
  1608. [ 11.806839] max77803_get_health_state: reg_data(0x3)
  1609. [ 11.808547] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1610. [ 11.824389] sec_chg_get_property: reg_data(93)
  1611. [ 11.824948] max77803_get_input_current: CHG_CNFG_09(0x12)
  1612. [ 11.835333] max77803_get_input_current: CHG_CNFG_09(0x12)
  1613. [ 11.835901] max77803_get_input_current: CHG_CNFG_09(0x12)
  1614. [ 11.837891] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1615. [ 11.838879] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1616. [ 11.838888] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1617. [ 11.838902] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1618. [ 11.840378] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1619. [ 11.854327] max77803_get_charger_state: CHG_DTLS : 0x 1
  1620. [ 11.854914] max77803_get_health_state: reg_data(0x3)
  1621. [ 11.856607] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1622. [ 11.857174] sec_chg_get_property: reg_data(93)
  1623. [ 11.857781] max77803_get_input_current: CHG_CNFG_09(0x12)
  1624. [ 11.859912] max77803_get_input_current: CHG_CNFG_09(0x12)
  1625. [ 11.860477] max77803_get_input_current: CHG_CNFG_09(0x12)
  1626. [ 11.863269] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1627. [ 11.869523] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1628. [ 11.869532] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1629. [ 11.869548] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1630. [ 11.875961] mdss_fb_set_backlight: [BL1] bkl_lvl (153), bl_updated(0), power(1)
  1631. [ 11.875966] Active wake lock:
  1632. [ 11.875972] <mce_lpm_off> Count(1) Time(0/0) Prevent(0)
  1633. [ 11.875977] <mce_bluez_wait> Count(1) Time(78/78) Prevent(0)
  1634. [ 11.875983] <mce_display_on> Count(1) Time(159/159) Prevent(0)
  1635. [ 11.875989] <mce_display_stm> Count(3) Time(73/90) Prevent(0)
  1636. [ 11.875994] <mce_tklock_notify> Count(1) Time(175/175) Prevent(0)
  1637. [ 11.875999] <mce_mux> Count(1) Time(230/230) Prevent(0)
  1638. [ 11.876007] <sec-battery-vbus> Count(1) Time(8210/8210) Prevent(0)
  1639. [ 11.876016] <msm_dwc3> Count(2) Time(1161/6164) Prevent(0)
  1640. [ 11.876157] mdss_fb_set_backlight: [BL1] bkl_lvl (152), bl_updated(0), power(1)
  1641. [ 11.876177] mdss_fb_set_backlight: [BL1] bkl_lvl (153), bl_updated(0), power(1)
  1642. [ 11.876531] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
  1643. [ 11.876537] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
  1644. [ 11.882842] [SSP]: MSG From MCU - Init
  1645. [ 11.882846] Gyro Temp Init
  1646. [ 11.882848] CheckLightLux Init
  1647.  
  1648. [ 11.882851] [INVN]ACCEL_MGMT2 : 63
  1649. [ 11.882853] =>GEP
  1650. [ 11.882855] =>PRP
  1651. [ 11.882857] =>LIGP
  1652. [ 11.882859] =>PRP
  1653. [ 11.882861] AD 8 1 0 1, 500
  1654. [ 11.882862] g_ptSh->cTimer = 500
  1655. [ 11.882865] SetRTC = 500
  1656. [ 11.937260] systemd-sysctl (3037): undefined instruction: pc=b6888d66
  1657. [ 11.937269] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1658. [ 11.937676] systemd-sysctl (3035): undefined instruction: pc=b6857d66
  1659. [ 11.937684] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1660. [ 11.939477] systemd-sysctl (3036): undefined instruction: pc=b68b7d66
  1661. [ 11.939486] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1662. [ 11.953985] systemd-sysctl (3039): undefined instruction: pc=b68b3d66
  1663. [ 11.953995] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1664. [ 11.955070] systemd-sysctl (3038): undefined instruction: pc=b67d1d66
  1665. [ 11.955080] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1666. [ 11.969416] systemd-sysctl (3043): undefined instruction: pc=b6876d66
  1667. [ 11.969427] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1668. [ 11.970389] systemd-sysctl (3041): undefined instruction: pc=b6800d66
  1669. [ 11.970399] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1670. [ 11.976779] dsme-server (3055): undefined instruction: pc=b6a59d66
  1671. [ 11.976790] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1672. [ 11.982331] systemd-sysctl (3040): undefined instruction: pc=b686bd66
  1673. [ 11.982342] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1674. [ 11.982395] systemd-sysctl (3047): undefined instruction: pc=b682fd66
  1675. [ 11.982404] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1676. [ 11.985701] systemd-sysctl (3042): undefined instruction: pc=b68a5d66
  1677. [ 11.985710] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1678. [ 11.989225] systemd-sysctl (3044): undefined instruction: pc=b6838d66
  1679. [ 11.989234] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1680. [ 11.990502] systemd-sysctl (3045): undefined instruction: pc=b6807d66
  1681. [ 11.990510] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1682. [ 11.999745] systemd-sysctl (3051): undefined instruction: pc=b681bd66
  1683. [ 11.999756] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1684. [ 12.005781] systemd-sysctl (3049): undefined instruction: pc=b681dd66
  1685. [ 12.005792] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1686. [ 12.007246] systemd-sysctl (3048): undefined instruction: pc=b67f2d66
  1687. [ 12.007254] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1688. [ 12.008316] systemd-sysctl (3053): undefined instruction: pc=b6897d66
  1689. [ 12.008325] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1690. [ 12.022565] systemd-sysctl (3058): undefined instruction: pc=b6897d66
  1691. [ 12.022574] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1692. [ 12.028990] systemd-sysctl (3059): undefined instruction: pc=b67cbd66
  1693. [ 12.029001] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1694. [ 12.037602] systemd-sysctl (3057): undefined instruction: pc=b688ed66
  1695. [ 12.037612] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1696. [ 12.247813] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1697. [ 12.247851] msm_thermal:msm_therm_temp_log (0 --- 57)(1 --- 52)(2 --- 47)(3 --- 50)(4 --- 57)(5 --- 63)(6 --- 64)(7 --- 61)(8 --- 62)(9 --- 51)(10 --- 46)
  1698. [ 12.380865] [SSP]: debug_work_func(6) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
  1699. [ 12.387309] [SSP] Sensor Posision A : 6, G : 6, M: 3
  1700. [ 13.226856] w1_uevent master_dev name = w1_bus_master1
  1701. [ 13.711194] usb: enable_show dev->enabled=1
  1702. [ 13.711245] usb: enabled: 0, dev->enabled: 1
  1703. [ 13.711254] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
  1704. [ 13.711261] dwc3 f9200000.dwc3: request 00000000 was not queued to ep0out
  1705. [ 13.711325] usb: usb_remove_config cdev->config=00000000, config=00000000
  1706. [ 13.802334] droid-hal-init: init first stage started!
  1707. [ 13.803664] droid-hal-init: init second stage started!
  1708. [ 13.812097] droid-hal-init: Failed to initialize property area
  1709. [ 13.830908] usb: enable_show dev->enabled=0
  1710. [ 13.830961] usb: enabled: 0, dev->enabled: 0
  1711. [ 13.830970] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
  1712. [ 13.831521] usb: enable_show dev->enabled=0
  1713. [ 13.831567] usb: enabled: 1, dev->enabled: 0
  1714. [ 13.831574] usb: enable_store f_holder->f:rndis
  1715. [ 13.831580] usb: enable_store vendor=18d1,product=a02,bcdDevice=232
  1716. [ 13.831585] ,Class=0,SubClass=0,Protocol=0
  1717. [ 13.831589] usb: enable_store next cmd : usb_add_config
  1718. [ 13.831596] rndis_function_bind_config: rndis_function_bind_config MAC: 02:53:07:57:61:36
  1719. [ 13.831620] android_usb gadget: using random self ethernet address
  1720. [ 13.831624] usb: set unique host mac
  1721. [ 13.831953] rndis0: MAC 8a:5b:d9:c0:c2:1f
  1722. [ 13.831958] rndis0: HOST MAC 02:53:07:57:61:36
  1723. [ 13.831989] schedule_usb_gadget_connect_work: schedule_usb_gadget_connect_work
  1724. [ 13.834200] usb_gadget_connect_work: usb_gadget_connect_work: speaker_status: 0, speaker_check_count 0
  1725. [ 13.834271] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
  1726. [ 13.834484] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
  1727. [ 13.843856] ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1728. [ 13.846679] systemd-sysctl (3828): undefined instruction: pc=b67f3d66
  1729. [ 13.846687] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1730. [ 13.933681] android_work: android_work: did not send uevent (1 1 00000000)
  1731. [ 13.940053] systemd-logind (3837): undefined instruction: pc=b67c1d66
  1732. [ 13.940064] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1733. [ 14.061049] usb:: dwc3_gadget_reset_interrupt
  1734. [ 14.061062] usb: composite_disconnect
  1735. [ 14.061428] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1736. [ 14.128982] usb:: dwc3_gadget_conndone_interrupt (HS)
  1737. [ 14.129029] android_work: android_work: did not send uevent (0 0 00000000)
  1738. [ 14.188975] usb: GET_DES
  1739. [ 14.189104] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1740. [ 14.192581] usb:: dwc3_gadget_reset_interrupt
  1741. [ 14.192591] usb: composite_disconnect
  1742. [ 14.192667] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1743. [ 14.195937] udisksd (3840): undefined instruction: pc=b5590d66
  1744. [ 14.195945] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1745. [ 14.212811] encsfa (3836): undefined instruction: pc=b6e53d66
  1746. [ 14.212820] Code: 8000 ef20 0150 4770 (ec51) 0f1e
  1747. [ 14.256992] usb:: dwc3_gadget_conndone_interrupt (HS)
  1748. [ 14.352962] usb: GET_DES
  1749. [ 14.353077] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1750. [ 14.353443] usb: set_config_number single config num=0
  1751. [ 14.353450] usb: set_interface_count next_interface_id=2
  1752. [ 14.353559] usb: set_config_number single config num=0
  1753. [ 14.353565] usb: set_interface_count next_interface_id=2
  1754. [ 14.354581] android_usb gadget: high-speed config #1: fe8050c8.android_usb
  1755. [ 14.354675] usb: SET_CON
  1756. [ 14.354680] usb: set_config_number single config num=0
  1757. [ 14.355022] ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  1758. [ 14.355177] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1759. [ 15.218602] droid-hal-init: init first stage started!
  1760. [ 15.220406] droid-hal-init: init second stage started!
  1761. [ 15.221894] droid-hal-init: Failed to initialize property area
  1762. [ 15.478190] max77803_get_input_current: CHG_CNFG_09(0x12)
  1763. [ 15.478732] max77803_get_input_current: CHG_CNFG_09(0x12)
  1764. [ 15.480572] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1765. [ 15.506794] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(350), Temp-ADC(31813)
  1766. [ 15.507746] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1767. [ 15.508670] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1768. [ 15.508677] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1769. [ 15.508685] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3801mV),Inow(450mA),Imax(460mA),SOC(36%),Tbat(350),is_hc_usb(0)
  1770. [ 15.508692] sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
  1771. [ 15.508711] sec_bat_check_callback: Battery status(1)
  1772. [ 15.508716] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1773. [ 15.509255] max77803_get_health_state: reg_data(0x3)
  1774. [ 15.510871] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1775. [ 15.510880] sec_bat_calculate_safety_time : EXPIRED_TIME(10799769), IP(2300000), CP(0), CURR(460), STANDARD(2000)
  1776. [ 15.510886] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(46955517) TIME NOW(15) TIME PREV(5)
  1777. [ 15.510891] sec_bat_calculate_safety_time : REMAIN_TIME(10797468) CAL_REMAIN_TIME(46945517)
  1778. [ 15.510899] sec-battery battery.95: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
  1779. [ 16.542434] droid-hal-init: init first stage started!
  1780. [ 16.544205] droid-hal-init: init second stage started!
  1781. [ 16.545686] droid-hal-init: Failed to initialize property area
  1782. [ 17.260860] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1783. [ 17.260895] msm_thermal:msm_therm_temp_log (0 --- 49)(1 --- 48)(2 --- 46)(3 --- 48)(4 --- 49)(5 --- 50)(6 --- 50)(7 --- 49)(8 --- 50)(9 --- 48)(10 --- 46)
  1784. [ 0.000000]
  1785. <6>[ 22.125337] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync write 59694
  1786. [ 22.125345] ldi_fps: input_fps=59694
  1787. [ 22.125350] ldi_fps:LDI EVT0 Not Support. Skip!!
  1788. [ 22.125416] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync failed
  1789. [ 22.274192] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1790. [ 22.274228] msm_thermal:msm_therm_temp_log (0 --- 52)(1 --- 49)(2 --- 46)(3 --- 48)(4 --- 50)(5 --- 56)(6 --- 53)(7 --- 52)(8 --- 52)(9 --- 48)(10 --- 46)
  1791. [ 0.000000]
  1792. <6>[ 22.674192] max77803-muic max77803-muic: func:max77803_muic_dock_usb_detect info->muic_data->sw_path:0
  1793. [ 23.125210] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1794. [ 23.367512] [SSP]: debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
  1795. [ 23.375832] [SSP] Sensor Posision A : 6, G : 6, M: 3
  1796. [ 24.269057] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1797. [ 24.917490] rndis0: no IPv6 routers present
  1798. [ 25.115615] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1799. [ 25.520529] max77803_get_input_current: CHG_CNFG_09(0x12)
  1800. [ 25.521134] max77803_get_input_current: CHG_CNFG_09(0x12)
  1801. [ 25.523048] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1802. [ 25.549524] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(350), Temp-ADC(31817)
  1803. [ 25.550509] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1804. [ 25.551509] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3610), data(0x0000)
  1805. [ 25.551516] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.9)
  1806. [ 25.551524] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3767mV),Inow(450mA),Imax(460mA),SOC(36%),Tbat(350),is_hc_usb(0)
  1807. [ 25.551531] sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
  1808. [ 25.551554] sec_bat_check_callback: Battery status(1)
  1809. [ 25.551559] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1810. [ 25.552123] max77803_get_health_state: reg_data(0x3)
  1811. [ 25.553803] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1812. [ 25.553812] sec_bat_calculate_safety_time : EXPIRED_TIME(10797468), IP(2300000), CP(0), CURR(460), STANDARD(2000)
  1813. [ 25.553818] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(46945513) TIME NOW(25) TIME PREV(15)
  1814. [ 25.553824] sec_bat_calculate_safety_time : REMAIN_TIME(10795167) CAL_REMAIN_TIME(46935513)
  1815. [ 25.553832] sec-battery battery.95: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
  1816. [ 25.660856] max77803-muic max77803-muic: func:max77803_muic_mhl_detect cable_type:1
  1817. [ 25.962145] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1818. [ 26.808706] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1819. [ 27.287515] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1820. [ 27.287550] msm_thermal:msm_therm_temp_log (0 --- 53)(1 --- 50)(2 --- 46)(3 --- 48)(4 --- 50)(5 --- 57)(6 --- 53)(7 --- 52)(8 --- 52)(9 --- 48)(10 --- 46)
  1821. [ 0.000000]
  1822. <6>[ 27.655261] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync write 59701
  1823. [ 27.655269] ldi_fps: input_fps=59701
  1824. [ 27.655275] ldi_fps:LDI EVT0 Not Support. Skip!!
  1825. [ 27.655390] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync failed
  1826. [ 28.501821] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1827. [ 29.334275] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1828. [ 30.180846] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1829. [ 31.027352] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1830. [ 31.873911] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1831. [ 32.212551] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1832. [ 32.300850] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1833. [ 32.300887] msm_thermal:msm_therm_temp_log (0 --- 51)(1 --- 49)(2 --- 46)(3 --- 49)(4 --- 51)(5 --- 53)(6 --- 57)(7 --- 51)(8 --- 53)(9 --- 48)(10 --- 46)
  1834. [ 0.000000]
  1835. <6>[ 33.123769] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync write 59678
  1836. [ 33.123777] ldi_fps: input_fps=59678
  1837. [ 33.123782] ldi_fps:LDI EVT0 Not Support. Skip!!
  1838. [ 33.123848] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync failed
  1839. [ 34.123626] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1840. [ 34.354190] [SSP]: debug_work_func(1) - Sensor state: 0x3ffff, RC: 0, MS: 0 Santi: 0 Dump: 0
  1841. [ 34.362545] [SSP] Sensor Posision A : 6, G : 6, M: 3
  1842. [ 35.123479] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1843. [ 35.560515] max77803_get_input_current: CHG_CNFG_09(0x12)
  1844. [ 35.561128] max77803_get_input_current: CHG_CNFG_09(0x12)
  1845. [ 35.563044] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3530), data(0x0000)
  1846. [ 35.589356] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(350), Temp-ADC(31816)
  1847. [ 35.590336] sec-battery battery.95: sec_bat_get_temperature_by_adc: Temp(292), Temp-ADC(33000)
  1848. [ 35.591308] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3530), data(0x0000)
  1849. [ 35.591315] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.1)
  1850. [ 35.591323] sec-battery battery.95: sec_bat_get_battery_info:Vnow(3771mV),Inow(450mA),Imax(460mA),SOC(36%),Tbat(350),is_hc_usb(0)
  1851. [ 35.591331] sec_bat_check_callback: battery->pdata->bat_irq_gpio(407)
  1852. [ 35.591351] sec_bat_check_callback: Battery status(1)
  1853. [ 35.591356] sec-battery battery.95: sec_bat_battery_cable_check: Battery Connected
  1854. [ 35.591932] max77803_get_health_state: reg_data(0x3)
  1855. [ 35.593616] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1856. [ 35.593625] sec-battery battery.95: sec_bat_time_management: Charging Time : 32 secs
  1857. [ 35.593632] sec-battery battery.95: sec_bat_temperature: HLT(2000) HLR(2000) HT(600), HR(400), LT(-45), LR(0)
  1858. [ 35.593642] sec_bat_swelling_check: Fail to sec-charger get (9=>-22)
  1859. [ 35.593758] sec_bat_swelling_check: status(1), swell_mode(0:0:0), cv(0)mV, temp(350)
  1860. [ 35.593766] sec-battery battery.95: sec_bat_fullcharged_check: Charging Mode : Normal
  1861. [ 35.593774] sec_bat_calculate_safety_time : EXPIRED_TIME(10795167), IP(2300000), CP(0), CURR(460), STANDARD(2000)
  1862. [ 35.593781] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(46935508) TIME NOW(35) TIME PREV(25)
  1863. [ 35.593787] sec_bat_calculate_safety_time : REMAIN_TIME(10792866) CAL_REMAIN_TIME(46925508)
  1864. [ 35.593795] sec-battery battery.95: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(4), Vendor(SDI SDI), level(100%)
  1865. [ 36.123342] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1866. [ 37.123195] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1867. [ 37.314177] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1868. [ 37.314211] msm_thermal:msm_therm_temp_log (0 --- 52)(1 --- 50)(2 --- 46)(3 --- 49)(4 --- 51)(5 --- 57)(6 --- 53)(7 --- 52)(8 --- 53)(9 --- 49)(10 --- 46)
  1869. [ 0.000000]
  1870. <6>[ 38.123056] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1871. [ 39.177179] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync write 59674
  1872. [ 39.177186] ldi_fps: input_fps=59674
  1873. [ 39.177191] ldi_fps:LDI EVT0 Not Support. Skip!!
  1874. [ 39.177255] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync failed
  1875. [ 40.009625] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1876. [ 40.856158] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1877. [ 41.702726] wacom_g5sp_i2c 6-0056: wacom_i2c_write_vsync vsync waiting time..
  1878. [ 42.074247] usb: enable_show dev->enabled=1
  1879. [ 42.074477] max77803_get_charger_state: CHG_DTLS : 0x 1
  1880. [ 42.075036] max77803_get_health_state: reg_data(0x3)
  1881. [ 42.076710] max77803_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
  1882. [ 42.077282] sec_chg_get_property: reg_data(93)
  1883. [ 42.077892] max77803_get_input_current: CHG_CNFG_09(0x12)
  1884. [ 42.079955] max77803_get_input_current: CHG_CNFG_09(0x12)
  1885. [ 42.080533] max77803_get_input_current: CHG_CNFG_09(0x12)
  1886. [ 42.082504] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3530), data(0x0000)
  1887. [ 42.083471] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (3530), data(0x0000)
  1888. [ 42.083478] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (36.1)
  1889. [ 42.083489] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
  1890. [ 42.084382] sec-battery battery.95: sec_pogo_get_property: pogo charger is online (0)
  1891. [ 42.327502] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
  1892. [ 42.327536] msm_thermal:msm_therm_temp_log (0 --- 51)(1 --- 49)(2 --- 46)(3 --- 49)(4 --- 53)(5 --- 53)(6 --- 53)(7 --- 53)(8 --- 57)(9 --- 49)(10 --- 47)
  1893. ^C
  1894.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!