API tools faq
paste
Guest User

Untitled

a guest
Apr 27th, 2017
120
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 64.00 KB | None | 0 0
raw download clone embed print report
  1. [ 0.894408] dsi_panel_device_register: Continuous splash enabled
  2. [ 0.894995] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
  3. [ 0.896061] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
  4. [ 0.896779] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
  5. [ 0.897084] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_sharp_fhd_td4722_xcmd:1:none:cfg:single_dsi panel_name:none
  6. [ 0.897089] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_sharp_fhd_td4722_xcmd:1:none:cfg:single_dsi
  7. [ 0.897092] mdss_dsi_ctrl_probe: panel configuration failed
  8. [ 0.897114] mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22
  9. [ 0.898445] mdss_dsi_status_init: DSI status check interval:5000
  10. [ 0.899540] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
  11. [ 0.901551] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
  12. [ 0.902050] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
  13. [ 0.902971] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
  14. [ 0.903046] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
  15. [ 0.903090] mdss_mdp_splash_parse_dt: splash mem child node is not present
  16. [ 0.920429] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
  17. [ 0.921238] msm_rpm_log_probe: OK
  18. [ 0.924573] subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
  19. [ 0.925376] subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
  20. [ 0.927835] smd_channel_probe_now: allocation table not initialized
  21. [ 0.927961] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
  22. [ 0.929950] input: qbt1000_key_input as /devices/virtual/input/input1
  23. [ 0.931630] uart_tx_gpio is not available
  24. [ 0.931642] uart_rx_gpio is not available
  25. [ 0.931644] uart_cts_gpio is not available
  26. [ 0.931647] uart_rfr_gpio is not available
  27. [ 0.932513] sps: BAM device 0x0000000007544000 is not registered yet.
  28. [ 0.932654] sps:BAM 0x0000000007544000 is registered.
  29. [ 0.934146] 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 21, base_baud = 460800) is a MSM HS UART
  30. [ 0.936272] msm_serial_hs module loaded
  31. [ 0.958001] brd: module loaded
  32. [ 0.958932] loop: module loaded
  33. [ 0.959081] zram: Created 1 device(s) ...
  34. [ 0.959189] at24 6-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
  35. [ 0.960249] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
  36. [ 0.960290] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
  37. [ 0.960297] QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 0.960301] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
  38. [ 0.960727] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
  39. [ 0.962690] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0xe (ok)
  40. [ 0.962899] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:11 tx:1) mode:FIFO slv_addr:0x67 MSTR_STS:0x0d1300c8 OPER:0x00000010
  41. [ 0.980157] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:11 tx:1) mode:FIFO slv_addr:0x67 MSTR_STS:0x0d1300c8 OPER:0x00000010
  42. [ 1.000097] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:11 tx:1) mode:FIFO slv_addr:0x67 MSTR_STS:0x0d1300c8 OPER:0x00000010
  43. [ 1.020054] ti_tusb320 9-0067: ti_tusb320_i2c_read: I2C read over retry limit
  44. [ 1.020059] ti_tusb320 9-0067: The device is absent
  45. [ 1.020515] ti_tusb320 9-0047: 023BSUT,144,50
  46. [ 1.040357] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  47. [ 1.060103] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  48. [ 1.080094] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:1 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  49. [ 1.100036] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
  50. [ 1.100103] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  51. [ 1.120094] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  52. [ 1.140096] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  53. [ 1.160037] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
  54. [ 1.160102] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  55. [ 1.180095] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  56. [ 1.200094] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  57. [ 1.220043] pericom_30216c 9-001d: pericom_30216c_i2c_write: I2C write over retry limit
  58. [ 2.730157] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:4 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  59. [ 2.750101] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:4 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1343c8 OPER:0x00000010
  60. [ 2.770092] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:4 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1343c8 OPER:0x00000010
  61. [ 2.790035] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
  62. [ 2.790039] pericom_30216c 9-001d: read:0,71,0,0
  63. [ 2.790101] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1343c8 OPER:0x00000090
  64. [ 2.810092] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  65. [ 2.830093] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  66. [ 2.850037] pericom_30216c 9-001d: pericom_30216c_i2c_write: I2C write over retry limit
  67. [ 2.850100] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  68. [ 2.870093] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000010
  69. [ 2.890093] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:2 tx:0) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1343c8 OPER:0x00000010
  70. [ 2.910035] pericom_30216c 9-001d: pericom_30216c_i2c_read: I2C read over retry limit
  71. [ 2.910096] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1343c8 OPER:0x00000090
  72. [ 2.930093] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  73. [ 2.950094] i2c-msm-v2 75b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x1d MSTR_STS:0x0d1300c8 OPER:0x00000090
  74. [ 2.970035] pericom_30216c 9-001d: pericom_30216c_i2c_write: I2C write over retry limit
  75. [ 2.970040] typec: Typec dev has registered,failed to register driver pericom_30216c
  76. [ 2.970056] pericom_30216c: probe of 9-001d failed with error -22
  77. [ 2.970179] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  78. [ 2.970182] i2c-core: driver [tabla-i2c-core] using legacy resume method
  79. [ 2.970231] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
  80. [ 2.970233] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
  81. [ 2.970278] i2c-core: driver [tasha-i2c-core] using legacy suspend method
  82. [ 2.970281] i2c-core: driver [tasha-i2c-core] using legacy resume method
  83. [ 2.972791] pn548_dev_init : start
  84. [ 2.975452] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
  85. [ 2.975471] qce 660000.qcedev: CE device = 0x0
  86. [ 2.975471] , IO base, CE = 0xffffff8003440000
  87. [ 2.975471] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
  88. [ 2.975471] IO base BAM = 0x (null)
  89. [ 2.975471] BAM IRQ 203
  90. [ 2.975471] Engines Availability = 0x2011053
  91. [ 2.975730] sps:BAM 0x0000000000644000 is registered.
  92. [ 2.976118] sps:BAM 0x0000000000644000 (va:0xffffff80052c0000) enabled: ver:0x27, number of pipes:16
  93. [ 2.976436] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 203
  94. [ 2.984696] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
  95. [ 2.984710] qcrypto 660000.qcrypto: CE device = 0x0
  96. [ 2.984710] , IO base, CE = 0xffffff8005300000
  97. [ 2.984710] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
  98. [ 2.984710] IO base BAM = 0x (null)
  99. [ 2.984710] BAM IRQ 203
  100. [ 2.984710] Engines Availability = 0x2011053
  101. [ 2.985086] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 203
  102. [ 2.991272] qcrypto 660000.qcrypto: qcrypto-ecb-aes
  103. [ 2.991361] qcrypto 660000.qcrypto: qcrypto-cbc-aes
  104. [ 2.991492] qcrypto 660000.qcrypto: qcrypto-ctr-aes
  105. [ 2.991629] qcrypto 660000.qcrypto: qcrypto-ecb-des
  106. [ 2.991698] qcrypto 660000.qcrypto: qcrypto-cbc-des
  107. [ 2.991767] qcrypto 660000.qcrypto: qcrypto-ecb-3des
  108. [ 2.991829] qcrypto 660000.qcrypto: qcrypto-cbc-3des
  109. [ 2.991890] qcrypto 660000.qcrypto: qcrypto-xts-aes
  110. [ 2.991953] qcrypto 660000.qcrypto: qcrypto-sha1
  111. [ 2.992014] qcrypto 660000.qcrypto: qcrypto-sha256
  112. [ 2.992080] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  113. [ 2.992141] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  114. [ 2.992204] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  115. [ 2.992265] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  116. [ 2.992325] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  117. [ 2.992389] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  118. [ 2.992450] qcrypto 660000.qcrypto: qcrypto-hmac-sha1
  119. [ 2.992511] qcrypto 660000.qcrypto: qcrypto-hmac-sha256
  120. [ 2.992573] qcrypto 660000.qcrypto: qcrypto-aes-ccm
  121. [ 2.992635] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
  122. [ 2.995332] ICE IRQ = 29
  123. [ 2.995479] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
  124. [ 2.995516] ICE IRQ = 30
  125. [ 2.999728] qcom_ice_get_pdevice: found ice device ffffffc0f705fe00
  126. [ 2.999739] qcom_ice_get_pdevice: matching platform device ffffffc0f8ff0c00
  127. [ 3.000178] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
  128. [ 3.000754] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
  129. [ 3.000760] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
  130. [ 3.001805] scsi host0: ufshcd
  131. [ 3.005378] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8001ff0000
  132. [ 3.021653] SCSI Media Changer driver v0.25
  133. [ 3.025316] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  134. [ 3.026431] tun: Universal TUN/TAP device driver, 1.6
  135. [ 3.026436] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  136. [ 3.026665] PPP generic driver version 2.4.2
  137. [ 3.026748] PPP BSD Compression module registered
  138. [ 3.026753] PPP Deflate Compression module registered
  139. [ 3.026786] PPP MPPE Compression module registered
  140. [ 3.026794] NET: Registered protocol family 24
  141. [ 3.026947] usbcore: registered new interface driver asix
  142. [ 3.027029] usbcore: registered new interface driver ax88179_178a
  143. [ 3.027052] usbcore: registered new interface driver cdc_ether
  144. [ 3.027069] usbcore: registered new interface driver net1080
  145. [ 3.027088] usbcore: registered new interface driver cdc_subset
  146. [ 3.027106] usbcore: registered new interface driver zaurus
  147. [ 3.027274] usbcore: registered new interface driver cdc_ncm
  148. [ 3.027780] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  149. [ 3.031041] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  150. [ 3.035079] 7411000.qusb supply USB3_GDSC not found, using dummy regulator
  151. [ 3.035362] 7412000.qusb supply USB3_GDSC not found, using dummy regulator
  152. [ 3.036585] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  153. [ 3.038470] msm-dwc3 6a00000.ssusb: unable to get dbm device
  154. [ 3.042608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  155. [ 3.042673] ehci-pci: EHCI PCI platform driver
  156. [ 3.042848] usbcore: registered new interface driver usb-storage
  157. [ 3.042870] usbcore: registered new interface driver ums-alauda
  158. [ 3.042889] usbcore: registered new interface driver ums-cypress
  159. [ 3.042910] usbcore: registered new interface driver ums-datafab
  160. [ 3.042933] usbcore: registered new interface driver ums-freecom
  161. [ 3.042953] usbcore: registered new interface driver ums-isd200
  162. [ 3.042971] usbcore: registered new interface driver ums-jumpshot
  163. [ 3.042993] usbcore: registered new interface driver ums-karma
  164. [ 3.043011] usbcore: registered new interface driver ums-sddr09
  165. [ 3.043032] usbcore: registered new interface driver ums-sddr55
  166. [ 3.043051] usbcore: registered new interface driver ums-usbat
  167. [ 3.043126] usbcore: registered new interface driver usbserial
  168. [ 3.043154] usbcore: registered new interface driver usb_ehset_test
  169. [ 3.043858] gbridge_init: gbridge_init successs.
  170. [ 3.044000] mousedev: PS/2 mouse device common for all mice
  171. [ 3.044173] usbcore: registered new interface driver xpad
  172. [ 3.046659] input: hbtp_vm as /devices/virtual/input/input2
  173. [ 3.047804] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
  174. [ 3.048054] i2c /dev entries driver
  175. [ 3.048479] lirc_dev: IR Remote Control driver registered, major 230
  176. [ 3.048486] IR NEC protocol handler initialized
  177. [ 3.048490] IR RC5(x/sz) protocol handler initialized
  178. [ 3.048494] IR RC6 protocol handler initialized
  179. [ 3.048498] IR JVC protocol handler initialized
  180. [ 3.048502] IR Sony protocol handler initialized
  181. [ 3.048506] IR SANYO protocol handler initialized
  182. [ 3.048510] IR Sharp protocol handler initialized
  183. [ 3.048514] IR LIRC bridge handler initialized
  184. [ 3.048518] IR XMP protocol handler initialized
  185. [ 3.081921] vmem: Up and running with 4 banks of memory from [??? 0xffffffc0f89d4338-0x00000000 flags 0xffffffc075932098]
  186. [ 3.098710] msm_camera_pinctrl_init:1306 Getting pinctrl handle failed
  187. [ 3.098724] msm_actuator_platform_probe:2059 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
  188. [ 3.098830] qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
  189. [ 3.098852] msm_camera_pinctrl_init:1306 Getting pinctrl handle failed
  190. [ 3.098855] msm_actuator_platform_probe:2059 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
  191. [ 3.098896] qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@1 failed with error -22
  192. [ 3.099858] failed: msm_camera_get_clk_info rc -12
  193. [ 3.099871] qcom,eeprom: probe of a0c000.qcom,cci:qcom,eeprom@0 failed with error -12
  194. [ 3.099893] failed: msm_camera_get_clk_info rc -12
  195. [ 3.099899] qcom,eeprom: probe of a0c000.qcom,cci:qcom,eeprom@1 failed with error -12
  196. [ 3.100763] CAM-SOC msm_camera_get_clk_info_internal:71 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
  197. [ 3.100771] failed: msm_camera_get_clk_info rc -22
  198. [ 3.100779] qcom,eeprom: probe of a0c000.qcom,cci:qcom,eeprom@2 failed with error -22
  199. [ 3.102171] msm_camera_pinctrl_init:1306 Getting pinctrl handle failed
  200. [ 3.102180] msm_ois_platform_probe:916 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
  201. [ 3.102291] qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
  202. [ 3.107261] CAM-SOC msm_camera_get_clk_info_internal:71 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
  203. [ 3.107273] failed: msm_camera_get_clk_info rc -22
  204. [ 3.107290] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@0 failed with error -22
  205. [ 3.107895] CAM-SOC msm_camera_get_clk_info_internal:71 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
  206. [ 3.107900] failed: msm_camera_get_clk_info rc -22
  207. [ 3.107907] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@1 failed with error -22
  208. [ 3.108319] CAM-SOC msm_camera_get_clk_info_internal:71 err: clk name/rates mismatch, strings=2, rates=18446744073709551594
  209. [ 3.108324] failed: msm_camera_get_clk_info rc -22
  210. [ 3.108331] qcom,camera: probe of a0c000.qcom,cci:qcom,camera@2 failed with error -22
  211. [ 3.113757] MSM-CPP cpp_init_hardware:864 CPP HW Version: 0x60000000
  212. [ 3.113772] MSM-CPP cpp_init_hardware:882 stream_cnt:0
  213. [ 3.116958] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
  214. [ 3.116969] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
  215. [ 3.118191] CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
  216. [ 3.118195] CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
  217. [ 3.126480] __msm_jpeg_init:1537] Jpeg Device id 0
  218. [ 3.127516] __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
  219. [ 3.132572] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
  220. [ 3.201329] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
  221. [ 3.202296] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  222. [ 3.203369] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  223. [ 3.204388] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  224. [ 3.205524] scsi 0:0:0:0: Direct-Access TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  225. [ 3.206348] scsi 0:0:0:1: Direct-Access TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  226. [ 3.206996] scsi 0:0:0:2: Direct-Access TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  227. [ 3.207658] scsi 0:0:0:3: Direct-Access TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  228. [ 3.208299] scsi 0:0:0:4: Direct-Access TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  229. [ 3.208970] scsi 0:0:0:5: Direct-Access TOSHIBA THGLF2G9J8LBATRH 0101 PQ: 0 ANSI: 6
  230. [ 3.217811] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6
  231. [ 3.223126] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
  232. [ 3.226940] sdb: sdb1
  233. [ 3.229554] sdc: sdc1
  234. [ 3.230091] msm_fd aa4000.qcom,fd: Face detection halt timeout
  235. [ 3.231640] SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
  236. [ 3.232398] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
  237. [ 3.232967] ------------[ cut here ]------------
  238. [ 3.232985] WARNING: CPU: 3 PID: 1 at /home/luca/android/lineage/kernel/xiaomi/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
  239. [ 3.232988] Unbalanced enable for IRQ 180
  240. [ 3.232991] Modules linked in:
  241. [ 3.233002] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G B 3.18.31-perf-g898f0c05c4aa-00026-g07fef2d2e346-dirty #6
  242. [ 3.233006] Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
  243. [ 3.233011] Call trace:
  244. [ 3.233023] [<ffffffc000207858>] dump_backtrace+0x0/0x270
  245. [ 3.233026] [<ffffffc000207adc>] show_stack+0x14/0x1c
  246. [ 3.233040] [<ffffffc000ea1708>] dump_stack+0x88/0xac
  247. [ 3.233045] [<ffffffc0002206e8>] warn_slowpath_common+0x8c/0xb0
  248. [ 3.233048] [<ffffffc00022075c>] warn_slowpath_fmt+0x50/0x58
  249. [ 3.233050] [<ffffffc00026b4bc>] __enable_irq+0x40/0x88
  250. [ 3.233053] [<ffffffc00026b56c>] enable_irq+0x68/0x78
  251. [ 3.233068] [<ffffffc0009a6ea0>] fg_probe+0x1798/0x27b8
  252. [ 3.233077] [<ffffffc000a99a1c>] spmi_drv_probe+0x14/0x1c
  253. [ 3.233086] [<ffffffc0006c7540>] driver_probe_device+0x164/0x37c
  254. [ 3.233089] [<ffffffc0006c7808>] __driver_attach+0x64/0x90
  255. [ 3.233092] [<ffffffc0006c6420>] bus_for_each_dev+0x74/0x90
  256. [ 3.233095] [<ffffffc0006c6ecc>] driver_attach+0x20/0x28
  257. [ 3.233097] [<ffffffc0006c6b34>] bus_add_driver+0x128/0x200
  258. [ 3.233099] [<ffffffc0006c8198>] driver_register+0x94/0xe0
  259. [ 3.233102] [<ffffffc000a99ed4>] spmi_driver_register+0x5c/0x64
  260. [ 3.233105] [<ffffffc001a41f74>] fg_init+0x18/0x20
  261. [ 3.233109] [<ffffffc000200a58>] do_one_initcall+0x1a0/0x1bc
  262. [ 3.233119] [<ffffffc001a00b58>] kernel_init_freeable+0x1c0/0x25c
  263. [ 3.233123] [<ffffffc000e9b580>] kernel_init+0x14/0xd8
  264. [ 3.233175] ---[ end trace 1a2f69eeaa8311b6 ]---
  265. [ 3.233938] FG: get_prop_capacity: loading batt profile, return last soc 0
  266. [ 3.234445] FG: get_prop_capacity: loading batt profile, return last soc 0
  267. [ 3.234584] FG: fg_probe: last soc 74
  268. [ 3.234591] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
  269. [ 3.235579] FG: get_esr_lvl: 80000,3400,3200,1
  270. [ 3.235584] FG: get_esr_lvl: 100000,3450,3100,1
  271. [ 3.236764] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40
  272. [ 3.237707] unable to find DT imem DLOAD mode node
  273. [ 3.240116] unable to find DT imem EDLOAD mode node
  274. [ 3.241898] unable to find DT imem dload-type node
  275. [ 3.274164] device-mapper: uevent: version 1.0.3
  276. [ 3.274318] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
  277. [ 3.274405] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  278. [ 3.274405]
  279. [ 3.275955] bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
  280. [ 3.276090] bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
  281. [ 3.276095] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
  282. [ 3.276098] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
  283. [ 3.276765] sdhci: Secure Digital Host Controller Interface driver
  284. [ 3.276771] sdhci: Copyright(c) Pierre Ossman
  285. [ 3.276775] sdhci-pltfm: SDHCI platform and OF driver helper
  286. [ 3.302845] lp5562 9-0030: internal clock used
  287. [ 3.309362] hidraw: raw HID events driver (C) Jiri Kosina
  288. [ 3.309741] usbcore: registered new interface driver usbhid
  289. [ 3.309746] usbhid: USB HID core driver
  290. [ 3.310335] ashmem: initialized
  291. [ 3.313833] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
  292. [ 3.380104] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  293. [ 3.386074] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
  294. [ 3.388177] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
  295. [ 3.388226] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
  296. [ 3.391666] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
  297. [ 3.395560] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
  298. [ 3.395665] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
  299. [ 3.395756] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
  300. [ 3.395843] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
  301. [ 3.398851] coresight-fuse 7602c.fuse: Fuse initialized
  302. [ 3.399273] coresight-cti: probe of 3010000.cti failed with error -1
  303. [ 3.399293] coresight-cti: probe of 3011000.cti failed with error -1
  304. [ 3.399310] coresight-cti: probe of 3012000.cti failed with error -1
  305. [ 3.399327] coresight-cti: probe of 3013000.cti failed with error -1
  306. [ 3.399344] coresight-cti: probe of 3014000.cti failed with error -1
  307. [ 3.399359] coresight-cti: probe of 3015000.cti failed with error -1
  308. [ 3.399618] coresight-cti: probe of 3016000.cti failed with error -1
  309. [ 3.399636] coresight-cti: probe of 3017000.cti failed with error -1
  310. [ 3.399653] coresight-cti: probe of 3018000.cti failed with error -1
  311. [ 3.399669] coresight-cti: probe of 3019000.cti failed with error -1
  312. [ 3.399685] coresight-cti: probe of 301a000.cti failed with error -1
  313. [ 3.399700] coresight-cti: probe of 301b000.cti failed with error -1
  314. [ 3.399717] coresight-cti: probe of 301c000.cti failed with error -1
  315. [ 3.399733] coresight-cti: probe of 301d000.cti failed with error -1
  316. [ 3.399749] coresight-cti: probe of 301e000.cti failed with error -1
  317. [ 3.399765] coresight-cti: probe of 3820000.cti failed with error -1
  318. [ 3.399781] coresight-cti: probe of 3920000.cti failed with error -1
  319. [ 3.399798] coresight-cti: probe of 3a20000.cti failed with error -1
  320. [ 3.399813] coresight-cti: probe of 3b20000.cti failed with error -1
  321. [ 3.399829] coresight-cti: probe of 38a0000.cti failed with error -1
  322. [ 3.399845] coresight-cti: probe of 39a0000.cti failed with error -1
  323. [ 3.399861] coresight-cti: probe of 3aa0000.cti failed with error -1
  324. [ 3.399877] coresight-cti: probe of 3ba0000.cti failed with error -1
  325. [ 3.399893] coresight-cti: probe of 38b0000.cti failed with error -1
  326. [ 3.399909] coresight-cti: probe of 3ab0000.cti failed with error -1
  327. [ 3.399925] coresight-cti: probe of 3ad0000.cti failed with error -1
  328. [ 3.399941] coresight-cti: probe of 39c0000.cti failed with error -1
  329. [ 3.399958] coresight-cti: probe of 39d0000.cti failed with error -1
  330. [ 3.399974] coresight-cti: probe of 38d0000.cti failed with error -1
  331. [ 3.399990] coresight-cti: probe of 39f0000.cti failed with error -1
  332. [ 3.400007] coresight-cti: probe of 3180000.cti failed with error -1
  333. [ 3.400066] coresight-cti: probe of 3044000.cti failed with error -1
  334. [ 3.400085] coresight-cti: probe of 3048000.cti failed with error -1
  335. [ 3.400101] coresight-cti: probe of 3040000.cti failed with error -1
  336. [ 3.400684] coresight-csr 3001000.csr: CSR initialized
  337. [ 3.401171] coresight-tmc: probe of 3028000.tmc failed with error -1
  338. [ 3.401320] coresight-tmc 3027000.tmc: failed to get flush cti
  339. [ 3.401324] coresight-tmc 3027000.tmc: failed to get reset cti
  340. [ 3.401401] coresight-tmc 3027000.tmc: TMC initialized
  341. [ 3.403859] coresight-replicator 3026000.replicator: REPLICATOR initialized
  342. [ 3.405072] coresight-tpdm: probe of 3038000.tpdm failed with error -1
  343. [ 3.405094] coresight-tpdm: probe of 3054000.tpdm failed with error -1
  344. [ 3.405111] coresight-tpdm: probe of 304c000.tpdm failed with error -1
  345. [ 3.405127] coresight-tpdm: probe of 3185000.tpdm failed with error -1
  346. [ 3.405144] coresight-tpdm: probe of 3050000.tpdm failed with error -1
  347. [ 3.405161] coresight-tpdm: probe of 3004000.tpdm failed with error -1
  348. [ 3.405177] coresight-tpdm: probe of 38e0000.tpdm failed with error -1
  349. [ 3.405703] coresight-stm: probe of 3002000.stm failed with error -1
  350. [ 3.406309] coresight-hwevent 98200c0.hwevent: Hardware Event driver initialized
  351. [ 3.406946] coresight-qpdi 7a1000.qpdi: QPDI hotplug card detection is not supported
  352. [ 3.406991] coresight-qpdi 7a1000.qpdi: CoreSight QPDI driver initialized
  353. [ 3.408230] usbcore: registered new interface driver snd-usb-audio
  354. [ 3.410859] tfa98xx_i2c_init(): TFA98XX driver version 2.9.0
  355. [ 3.420397] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
  356. [ 3.420664] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
  357. [ 3.420672] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  358. [ 3.420804] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
  359. [ 3.420810] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  360. [ 3.420938] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
  361. [ 3.420945] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  362. [ 3.421071] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
  363. [ 3.421077] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  364. [ 3.421096] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
  365. [ 3.421219] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
  366. [ 3.421225] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  367. [ 3.421351] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
  368. [ 3.421357] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  369. [ 3.421480] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
  370. [ 3.421486] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  371. [ 3.421616] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
  372. [ 3.421622] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  373. [ 3.421640] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
  374. [ 3.421765] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
  375. [ 3.421770] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  376. [ 3.421896] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
  377. [ 3.421902] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  378. [ 3.422030] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
  379. [ 3.422036] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  380. [ 3.422164] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
  381. [ 3.422169] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  382. [ 3.422187] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
  383. [ 3.422310] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
  384. [ 3.422316] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  385. [ 3.422440] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
  386. [ 3.422446] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  387. [ 3.422572] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
  388. [ 3.422578] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  389. [ 3.422705] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
  390. [ 3.422712] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  391. [ 3.424819] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
  392. [ 3.433294] GACT probability NOT on
  393. [ 3.433309] Mirror/redirect action on
  394. [ 3.433323] u32 classifier
  395. [ 3.433325] Actions configured
  396. [ 3.433341] Netfilter messages via NETLINK v0.30.
  397. [ 3.433367] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  398. [ 3.433527] ctnetlink v0.93: registering with nfnetlink.
  399. [ 3.433836] xt_time: kernel timezone is -0000
  400. [ 3.433958] ip_tables: (C) 2000-2006 Netfilter Core Team
  401. [ 3.434018] arp_tables: (C) 2002 David S. Miller
  402. [ 3.434037] TCP: cubic registered
  403. [ 3.434041] Initializing XFRM netlink socket
  404. [ 3.434222] NET: Registered protocol family 10
  405. [ 3.434754] mip6: Mobile IPv6
  406. [ 3.434770] ip6_tables: (C) 2000-2006 Netfilter Core Team
  407. [ 3.434840] sit: IPv6 over IPv4 tunneling driver
  408. [ 3.435079] NET: Registered protocol family 17
  409. [ 3.435097] NET: Registered protocol family 15
  410. [ 3.435135] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  411. [ 3.435142] Ebtables v2.0 registered
  412. [ 3.435293] Bluetooth: ffffffc0f989bce0
  413. [ 3.435300] Bluetooth: ffffffc0f989bcd0Bluetooth: ffffffc0f989bd10
  414. [ 3.435322] Bluetooth: ffffffc0f989bcf0Bluetooth: ffffffc0f989bcf0
  415. [ 3.435328] Bluetooth: ffffffc0f989bcd0Bluetooth: ffffffc0f989bd40
  416. [ 3.435335] Bluetooth: ffffffc0f989bd20<6>[ 3.435356] l2tp_core: L2TP core driver, V2.0
  417. [ 3.435364] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  418. [ 3.435368] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  419. [ 3.435382] l2tp_netlink: L2TP netlink interface
  420. [ 3.435399] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  421. [ 3.435410] l2tp_debugfs: L2TP debugfs support
  422. [ 3.435414] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  423. [ 3.436220] NET: Registered protocol family 27
  424. [ 3.437642] usb_otg_vreg: no parameters
  425. [ 3.437705] reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
  426. [ 3.437755] reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
  427. [ 3.439821] subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
  428. [ 3.440871] subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
  429. [ 3.442017] pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
  430. [ 3.442514] pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
  431. [ 3.444929] sps:BAM 0x0000000006b04000 is registered.
  432. [ 3.446452] qpnp-smbcharger qpnp-smbcharger-21: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
  433. [ 3.446582] smbcharger_charger_otg: no parameters
  434. [ 3.446679] smbcharger_external_otg: no parameters
  435. [ 3.446705] smbcharger_external_otg: supplied by pmi8994_boost_5v
  436. [ 3.447026] smb:01:1000 02 6e 7f 85 00 10 0f 03 1f 03 2e 10 00 01 03 02 1f 47 c7 0f 00 09
  437. [ 3.447191] smb:01:1200 00 00 0f 04 06 c5 02 03 02 3b 1e 04 d8 41
  438. [ 3.447393] smb:01:1300 10 02 12 08 08 00 08 0f ff 04 00 0f 02 0d 04 19 ab
  439. [ 3.447489] smb:01:1400 01 0f 02 0d 04 00 02 0c
  440. [ 3.447700] smb:01:1600 10 01 0f 00 12 3a 25 b8 18 9e e2 00 00 03 d9 01 f1 02
  441. [ 3.448513] FG: get_prop_capacity: loading batt profile, return last soc 74
  442. [ 3.449509] FG: get_prop_capacity: loading batt profile, return last soc 74
  443. [ 3.449631] FG: get_prop_capacity: loading batt profile, return last soc 74
  444. [ 3.449790] FG: get_prop_capacity: loading batt profile, return last soc 74
  445. [ 3.470179] FG: get_prop_capacity: loading batt profile, return last soc 74
  446. [ 3.470684] SMBCHG: read_usb_type: reg type 16
  447. [ 3.471347] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x22 (ok)
  448. [ 3.474242] FG: get_prop_capacity: loading batt profile, return last soc 74
  449. [ 3.474896] FG: get_prop_capacity: loading batt profile, return last soc 74
  450. [ 3.476975] qpnp-smbcharger qpnp-smbcharger-21: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
  451. [ 3.515416] msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout
  452. [ 3.515423] msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969
  453. [ 3.516816] FG: get_prop_capacity: loading batt profile, return last soc 74
  454. [ 3.516971] SMBCHG: read_usb_type: reg type 16
  455. [ 3.517120] SMBCHG: read_usb_type: reg type 16
  456. [ 3.517203] qpnp-smbcharger qpnp-smbcharger-21: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
  457. [ 3.517391] FG: get_prop_capacity: loading batt profile, return last soc 74
  458. [ 3.570052] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  459. [ 3.570750] usb_otg_vreg: no parameters
  460. [ 3.570781] usb_otg_vreg: supplied by smbcharger_external_otg
  461. [ 3.630278] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  462. [ 3.631159] Loading compiled-in X.509 certificates
  463. [ 3.631850] Loaded X.509 cert 'Magrathea: Glacier signing key: ad6b72c14bae182e5e70f45fa733e429fe7bca28'
  464. [ 3.632716] Key type encrypted registered
  465. [ 3.634743] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
  466. [ 3.634795] adsprpc: channel link type: 0
  467. [ 3.700065] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  468. [ 3.702099] RNDIS_IPA module is loaded.
  469. [ 3.702528] file system registered
  470. [ 3.702556] mbim_init: initialize 1 instances
  471. [ 3.702588] mbim_init: Initialized 1 ports
  472. [ 3.703256] rndis_qc_init: initialize rndis QC instance
  473. [ 3.703357] Number of LUNs=8
  474. [ 3.703363] Mass Storage Function, version: 2009/09/11
  475. [ 3.703366] LUN: removable file: (no medium)
  476. [ 3.703376] Number of LUNs=1
  477. [ 3.703397] LUN: removable file: (no medium)
  478. [ 3.703400] Number of LUNs=1
  479. [ 3.703515] android_usb gadget: android_usb ready
  480. [ 3.704916] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input3
  481. [ 3.705205] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-03-05 22:44:07 UTC (5525047)
  482. [ 3.705669] pwm-ir soc:pwm_ir: reg-id = (null), low-active = 0, use-timer = 0
  483. [ 3.705817] Registered IR keymap rc-lirc
  484. [ 3.705911] input: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0/input4
  485. [ 3.705945] rc0: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0
  486. [ 3.706051] rc rc0: lirc_dev: driver ir-lirc-codec (pwm-ir) registered at minor = 0
  487. [ 3.707511] FG: get_prop_capacity: loading batt profile, return last soc 74
  488. [ 3.711537] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
  489. [ 3.711741] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
  490. [ 3.711855] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
  491. [ 3.711965] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
  492. [ 3.712076] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
  493. [ 3.712189] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
  494. [ 3.712299] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
  495. [ 3.712410] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
  496. [ 3.714230] parse_cpu_levels: idx 1 545
  497. [ 3.714235] parse_cpu_levels: idx 2 1785
  498. [ 3.714238] parse_cpu_levels: idx 2 3025
  499. [ 3.714273] parse_cpu_levels: idx 1 545
  500. [ 3.714275] parse_cpu_levels: idx 2 1785
  501. [ 3.714277] parse_cpu_levels: idx 2 3025
  502. [ 3.716020] qcom,qpnp-flash-led qpnp-flash-led-31: Unable to acquire pinctrl
  503. [ 3.717581] rmnet_ipa started initialization
  504. [ 3.717589] IPA SSR support = True
  505. [ 3.717591] IPA ipa-loaduC = True
  506. [ 3.717593] IPA SG support = True
  507. [ 3.719136] ipa ipa_sps_irq_control_all:938 EP (5) not allocated.
  508. [ 3.719142] ipa ipa2_uc_state_check:301 uC is not loaded
  509. [ 3.719835] rmnet_ipa completed initialization
  510. [ 3.723544] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
  511. [ 3.724867] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  512. [ 3.725255] usb_otg_vreg: disabling
  513. [ 3.725327] disp_vddr_vreg: disabling
  514. [ 3.725333] disp_vddts_vreg: disabling
  515. [ 3.725336] rome_vreg: disabling
  516. [ 3.725339] gdsc_mmagic_bimc: disabling
  517. [ 3.725376] kryo1-retention: disabling
  518. [ 3.725379] kryo0-retention: disabling
  519. [ 3.725381] gfx_mem_acc_corner: disabling
  520. [ 3.725384] apcc_l3_mem_acc_corner: disabling
  521. [ 3.725386] apc1_perfcl_mem_acc_corner: disabling
  522. [ 3.725388] apc0_pwrcl_mem_acc_corner: disabling
  523. [ 3.725396] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
  524. [ 3.725667] clock_late_init: Removing enables held for handed-off clocks
  525. [ 3.729427] ALSA device list:
  526. [ 3.729430] No soundcards found.
  527. [ 3.729479] Warning: unable to open an initial console.
  528. [ 3.729744] Freeing unused kernel memory: 2132K (ffffffc001a00000 - ffffffc001c15000)
  529. [ 3.729760] Freeing alternatives memory: 84K (ffffffc001c15000 - ffffffc001c2a000)
  530. [ 3.730670] init: init first stage started!
  531. [ 3.732452] SELinux: 2048 avtab hash slots, 14281 rules.
  532. [ 3.734834] SELinux: 2048 avtab hash slots, 14281 rules.
  533. [ 3.734852] SELinux: 1 users, 2 roles, 1194 types, 0 bools, 1 sens, 1024 cats
  534. [ 3.734857] SELinux: 63 classes, 14281 rules
  535. [ 3.735567] SELinux: Class can_socket not defined in policy.
  536. [ 3.735573] SELinux: the above unknown classes and permissions will be denied
  537. [ 3.735590] SELinux: Completing initialization.
  538. [ 3.735592] SELinux: Setting up existing superblocks.
  539. [ 3.735601] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  540. [ 3.735617] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  541. [ 3.735670] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  542. [ 3.735684] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  543. [ 3.735699] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  544. [ 3.760086] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  545. [ 3.761451] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  546. [ 3.761683] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  547. [ 3.761693] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  548. [ 3.761700] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  549. [ 3.761705] SELinux: initialized (dev aio, type aio), not configured for labeling
  550. [ 3.761711] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  551. [ 3.761725] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  552. [ 3.761778] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  553. [ 3.761792] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  554. [ 3.802326] audit: type=1403 audit(5525047.589:2): policy loaded auid=4294967295 ses=4294967295
  555. [ 3.802742] audit: type=1404 audit(5525047.589:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  556. [ 3.803023] init: (Initializing SELinux enforcing took 0.07s.)
  557. [ 3.805306] init: init second stage started!
  558. [ 3.809884] init: Running restorecon...
  559. [ 3.820055] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  560. [ 3.946954] init: waitpid failed: No child processes
  561. [ 3.947127] init: (Loading properties from /default.prop took 0.00s.)
  562. [ 3.948169] init: (Parsing /init.environ.rc took 0.00s.)
  563. [ 3.948344] init: (Parsing /init.usb.rc took 0.00s.)
  564. [ 3.949182] init: (Parsing init.qcom.power.rc took 0.00s.)
  565. [ 3.949522] init: (Parsing init.qcom.usb.rc took 0.00s.)
  566. [ 3.949562] init: (Parsing init.target.rc took 0.00s.)
  567. [ 3.949570] init: (Parsing /init.qcom.rc took 0.00s.)
  568. [ 3.949881] init: (Parsing /init.usb.configfs.rc took 0.00s.)
  569. [ 3.949930] init: (Parsing /init.zygote64_32.rc took 0.00s.)
  570. [ 3.950249] init: (Parsing /init.cm.rc took 0.00s.)
  571. [ 3.950257] init: (Parsing /init.rc took 0.00s.)
  572. [ 3.950564] init: Starting service 'ueventd'...
  573. [ 3.951226] init: Waiting for /dev/.coldboot_done...
  574. [ 3.952137] ueventd: ueventd started!
  575. [ 3.982040] FG: get_prop_capacity: loading batt profile, return last soc 74
  576. [ 3.994360] FG: get_prop_capacity: loading batt profile, return last soc 74
  577. [ 4.303687] ueventd: Coldboot took 0.35s.
  578. [ 4.303850] init: Waiting for /dev/.coldboot_done took 0.35s.
  579. [ 4.304435] keychord: using input dev qpnp_pon for fevent
  580. [ 4.304440] keychord: using input dev qbt1000_key_input for fevent
  581. [ 4.304445] keychord: using input dev gpio-keys for fevent
  582. [ 4.304499] init: console init failed. Open on Console device failed(No such device)
  583. [ 4.304983] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  584. [ 4.306083] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  585. [ 4.306247] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
  586. [ 4.308080] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
  587. [ 4.308109] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
  588. [ 4.308126] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
  589. [ 4.308143] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
  590. [ 4.308159] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
  591. [ 4.308855] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  592. [ 4.309801] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  593. [ 4.311961] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
  594. [ 4.312066] Registered swp emulation handler
  595. [ 4.312350] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.swappiness': No such file or directory
  596. [ 4.312366] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate': No such file or directory
  597. [ 4.321446] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=f2fs)=-1
  598. [ 4.323868] EXT4-fs (sda14): Ignoring removed nomblk_io_submit option
  599. [ 4.349783] EXT4-fs (sda14): warning: maximal mount count reached, running e2fsck is recommended
  600. [ 4.350240] EXT4-fs (sda14): recovery complete
  601. [ 4.351698] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  602. [ 4.351723] SELinux: initialized (dev sda14, type ext4), uses xattr
  603. [ 4.351800] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cache,/cache,ext4)=0: Success
  604. [ 4.352978] fs_mgr: check_fs(): unmount(/cache) succeeded
  605. [ 4.353008] fs_mgr: Not running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache (executable not in system image)
  606. [ 4.355041] EXT4-fs (sda14): warning: maximal mount count reached, running e2fsck is recommended
  607. [ 4.355320] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: barrier=1
  608. [ 4.355337] SELinux: initialized (dev sda14, type ext4), uses xattr
  609. [ 4.355389] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cache,target=/cache,type=ext4)=0
  610. [ 4.355399] fs_mgr: mount_with_alternatives(): Mounted /dev/block/bootdevice/by-name/cache on /cache with fs_type=ext4 instead of f2fs
  611. [ 4.357859] EXT4-fs (sde39): mounted filesystem with ordered data mode. Opts: barrier=1
  612. [ 4.357876] SELinux: initialized (dev sde39, type ext4), uses xattr
  613. [ 4.357935] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
  614. [ 4.360809] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=f2fs)=-1
  615. [ 4.362890] EXT4-fs (sda15): Ignoring removed nomblk_io_submit option
  616. [ 4.402947] EXT4-fs (sda15): recovery complete
  617. [ 4.403510] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  618. [ 4.403529] SELinux: initialized (dev sda15, type ext4), uses xattr
  619. [ 4.403596] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
  620. [ 4.406002] fs_mgr: check_fs(): unmount(/data) succeeded
  621. [ 4.406456] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
  622. [ 4.412480] random: e2fsck urandom read with 94 bits of entropy available
  623. [ 5.231743] FG: get_esr_lvl: 80000,3400,3200,1
  624. [ 5.231749] FG: get_esr_lvl: 100000,3450,3100,1
  625. [ 5.491139] random: nonblocking pool is initialized
  626. [ 6.340221] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1363200. Temp:60
  627. [ 6.340227] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1363200. Temp:60
  628. [ 6.340230] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1977600. Temp:60
  629. [ 6.340233] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1977600. Temp:60
  630. [ 6.440050] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  631. [ 6.440050]
  632. [ 6.440080] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  633. [ 6.440080]
  634. [ 6.440091] e2fsck: Pass 2: Checking directory structure
  635. [ 6.440091]
  636. [ 6.440100] e2fsck: Pass 3: Checking directory connectivity
  637. [ 6.440100]
  638. [ 6.440109] e2fsck: Pass 4: Checking reference counts
  639. [ 6.440109]
  640. [ 6.440118] e2fsck: Pass 5: Checking group summary information
  641. [ 6.440118]
  642. [ 6.440128] e2fsck: /dev/block/bootdevice/by-name/userdata: 94769/3588096 files (2.0% non-contiguous), 2795040/14350327 blocks
  643. [ 6.440128]
  644. [ 6.440258] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 2188800. Temp:36
  645. [ 6.440264] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 2188800. Temp:36
  646. [ 6.440268] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2342400. Temp:36
  647. [ 6.440271] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2342400. Temp:36
  648. [ 6.447616] EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  649. [ 6.447635] SELinux: initialized (dev sda15, type ext4), uses xattr
  650. [ 6.447693] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
  651. [ 6.447703] fs_mgr: mount_with_alternatives(): Mounted /dev/block/bootdevice/by-name/userdata on /data with fs_type=ext4 instead of f2fs
  652. [ 6.460452] EXT4-fs (sda12): recovery complete
  653. [ 6.461010] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: barrier=1
  654. [ 6.461029] SELinux: initialized (dev sda12, type ext4), uses xattr
  655. [ 6.461090] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/persist,target=/persist,type=ext4)=0
  656. [ 6.463214] EXT4-fs (sde32): mounted filesystem with ordered data mode. Opts: barrier=1
  657. [ 6.463273] SELinux: initialized (dev sde32, type ext4), uses mountpoint labeling
  658. [ 6.463306] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/dsp,target=/dsp,type=ext4)=0
  659. [ 6.464596] SELinux: initialized (dev sde35, type vfat), uses mountpoint labeling
  660. [ 6.464630] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem,target=/firmware,type=vfat)=0
  661. [ 6.465682] SELinux: initialized (dev sde26, type vfat), uses mountpoint labeling
  662. [ 6.465713] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/bluetooth,target=/bt_firmware,type=vfat)=0
  663. [ 6.468539] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
  664. [ 6.468886] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
  665. [ 6.469148] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
  666. [ 6.469433] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
  667. [ 6.469698] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
  668. [ 6.469964] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
  669. [ 6.470221] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
  670. [ 6.470468] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
  671. [ 6.470767] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
  672. [ 6.471055] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
  673. [ 6.471283] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
  674. [ 6.471523] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
  675. [ 6.471742] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
  676. [ 6.472009] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
  677. [ 6.472330] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
  678. [ 6.472608] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
  679. [ 6.472831] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
  680. [ 6.473091] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
  681. [ 6.473310] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
  682. [ 6.473551] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
  683. [ 6.473783] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
  684. [ 6.474045] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
  685. [ 6.474269] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
  686. [ 6.474503] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
  687. [ 6.474736] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
  688. [ 6.475017] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
  689. [ 6.475270] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
  690. [ 6.475512] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
  691. [ 6.475757] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
  692. [ 6.476028] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
  693. [ 6.476273] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
  694. [ 6.477454] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
  695. [ 6.478278] init: Starting service 'logd'...
  696. [ 6.496455] audit: type=1400 audit(5525050.279:4): avc: denied { dac_override } for pid=430 comm="logd" capability=1 scontext=u:r:logd:s0 tcontext=u:r:logd:s0 tclass=capability permissive=0
  697. [ 6.496471] audit: type=1400 audit(5525050.279:5): avc: denied { dac_read_search } for pid=430 comm="logd" capability=2 scontext=u:r:logd:s0 tcontext=u:r:logd:s0 tclass=capability permissive=0
  698. [ 6.497586] logd.auditd: start
  699. [ 6.497622] logd.klogd: 6497598486
  700. [ 6.724453] init: (Loading properties from /system/build.prop took 0.00s.)
  701. [ 6.724491] init: (Loading properties from /vendor/build.prop took 0.00s.)
  702. [ 6.724508] init: (Loading properties from /factory/factory.prop took 0.00s.)
  703. [ 6.725627] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': No such file or directory
  704. [ 6.725646] init: write_file: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory
  705. [ 6.725929] init: Starting service 'debuggerd'...
  706. [ 6.726344] init: Starting service 'debuggerd64'...
  707. [ 6.727546] init: Starting service 'vold'...
  708. [ 6.728723] init: Not bootcharting.
  709. [ 6.853029] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
  710. [ 6.859646] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 447) exited with status 0
  711. [ 6.871940] init: Starting service 'perfd'...
  712. [ 6.876429] init: Starting service 'sysinit'...
  713. [ 6.877097] init: (Loading properties from /data/local.prop took 0.00s.)
  714. [ 6.962789] init: Starting service 'logd-reinit'...
  715. [ 6.966210] subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008fe00000 to 0x0000000091900000
  716. [ 6.971021] logd.daemon: reinit
  717. [ 7.230259] of_batterydata_get_best_profile: b7_atl found
  718. [ 7.240509] FG: fg_batt_profile_init: Battery SOC: 75, V: 4047217uV
  719. [ 7.240860] SMBCHG: read_usb_type: reg type 16
  720. [ 7.257541] subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
  721. [ 7.267839] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  722. [ 7.279033] subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
  723. [ 7.279061] subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
  724. [ 7.279079] L-Notify: Generel: 7
  725. [ 7.279278] init: Service 'sysinit' (pid 449) exited with status 0
  726. [ 7.279368] init: Service 'logd-reinit' (pid 461) exited with status 0
  727. [ 7.279432] subsys-restart: __subsystem_get(): Changing subsys fw_name to slpi_a4
  728. [ 7.279439] sysmon_send_event_no_qmi: Message sending failed -19
  729. [ 7.286257] subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000091900000 to 0x0000000092300000
  730. [ 7.289355] apr_tal:Q6 Is Up
  731. [ 7.320095] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  732. [ 7.322404] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  733. [ 7.337059] ------------[ cut here ]------------
  734. [ 7.337083] WARNING: CPU: 2 PID: 172 at /home/luca/android/lineage/kernel/xiaomi/msm8996/kernel/irq/manage.c:448 __enable_irq+0x40/0x88()
  735. [ 7.337086] Unbalanced enable for IRQ 178
  736. [ 7.337088] Modules linked in:
  737. [ 7.337096] CPU: 2 PID: 172 Comm: kworker/2:1 Tainted: G B W 3.18.31-perf-g898f0c05c4aa-00026-g07fef2d2e346-dirty #6
  738. [ 7.337099] Hardware name: Qualcomm Technologies, Inc. MSM 8996pro + PMI8996 MTP (DT)
  739. [ 7.337111] Workqueue: events status_change_work
  740. [ 7.337116] Call trace:
  741. [ 7.337125] [<ffffffc000207858>] dump_backtrace+0x0/0x270
  742. [ 7.337130] [<ffffffc000207adc>] show_stack+0x14/0x1c
  743. [ 7.337140] [<ffffffc000ea1708>] dump_stack+0x88/0xac
  744. [ 7.337145] [<ffffffc0002206e8>] warn_slowpath_common+0x8c/0xb0
  745. [ 7.337147] [<ffffffc00022075c>] warn_slowpath_fmt+0x50/0x58
  746. [ 7.337150] [<ffffffc00026b4bc>] __enable_irq+0x40/0x88
  747. [ 7.337153] [<ffffffc00026b56c>] enable_irq+0x68/0x78
  748. [ 7.337156] [<ffffffc0009a0280>] status_change_work+0x154/0xb4c
  749. [ 7.337168] [<ffffffc000235ae4>] process_one_work+0x25c/0x438
  750. [ 7.337171] [<ffffffc0002364d0>] worker_thread+0x324/0x440
  751. [ 7.337175] [<ffffffc00023a584>] kthread+0xe4/0xec
  752. [ 7.337178] ---[ end trace 1a2f69eeaa8311b8 ]---
  753. [ 7.380056] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  754. [ 7.383001] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  755. [ 7.383663] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
  756. [ 7.384367] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
  757. [ 7.391224] sps:BAM 0x0000000009184000 (va:0xffffff8005d80000) enabled: ver:0x19, number of pipes:31
  758. [ 7.391234] sps:BAM 0x0000000009184000 is registered.
  759. [ 7.392133] wcd9335-slim tasha-slim-pgd: Platform data from device tree
  760. [ 7.392211] wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
  761. [ 7.392224] wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
  762. [ 7.392237] wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  763. [ 7.392251] wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
  764. [ 7.392264] wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
  765. [ 7.392269] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
  766. [ 7.392274] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
  767. [ 7.392280] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
  768. [ 7.392285] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
  769. [ 7.392291] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
  770. [ 7.392296] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
  771. [ 7.392300] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
  772. [ 7.392305] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
  773. [ 7.392325] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-ecpp-dmic-rate property in node /soc/slim@91c0000/tasha_codec failed, err = -22
  774. [ 7.392329] wcd9335-slim tasha-slim-pgd: wcd9xxx_validate_dmic_sample_rate: Invalid ecpp_dmic_rate = 0, for mclk 9600000
  775. [ 7.392334] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-dmic-clk-drv-strength property in node /soc/slim@91c0000/tasha_codec failed, err = -22
  776. [ 7.392343] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
  777. [ 7.431146] subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
  778. [ 7.440055] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  779. [ 7.440929] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  780. [ 7.460204] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
  781. [ 7.460226] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
  782. [ 7.460458] slimbus:1 laddr:0xca, EAPC:0x0:0xa0
  783. [ 7.460655] wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
  784. [ 7.461165] wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
  785. [ 7.461175] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
  786. [ 7.472259] tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
  787. [ 7.484344] subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
  788. [ 7.484357] subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
  789. [ 7.484716] sysmon_send_event_no_qmi: Message sending failed -19
  790. [ 7.484725] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
  791. [ 7.485040] init: write_file: Unable to open '/sys/bus/msm_subsys/devices/subsys5/restart_level': No such file or directory
  792. [ 7.485300] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
  793. [ 7.485354] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
  794. [ 7.486367] init: Starting service 'healthd'...
  795. [ 7.486861] init: Starting service 'irsc_util'...
  796. [ 7.487293] init: Starting service 'rmt_storage'...
  797. [ 7.487739] init: Starting service 'tftp_server'...
  798. [ 7.488202] init: Starting service 'config_bt_addr'...
  799. [ 7.488704] init: Starting service 'sensors'...
  800. [ 7.489150] init: Starting service 'panel-sh'...
  801. [ 7.489578] init: Starting service 'qseecomd'...
  802. [ 7.490182] init: Starting service 'per_mgr'...
  803. [ 7.490775] init: Starting service 'lmkd'...
  804. [ 7.491796] init: Starting service 'servicemanager'...
  805. [ 7.492358] init: Starting service 'surfaceflinger'...
  806. [ 7.500073] msm_11ad soc:qcom,wil6210: Parent PCIE enumeration failed
  807. [ 7.500923] msm8996_populate_dai_link_component_of_node: No match found for platform name: msm-pcm-dsp-noirq
  808. [ 7.511264] init: Service 'irsc_util' (pid 498) exited with status 0
  809. [ 7.512022] init: Service 'panel-sh' (pid 503) exited with status 0
  810. [ 7.523867] init: Service 'config_bt_addr' (pid 501) exited with status 0
  811. [ 7.525172] init: SELinux: Could not get canonical path for /sys/block/mmcblk0/queue/scheduler restorecon: No such file or directory.
  812. [ 7.525577] init: SELinux: Could not get canonical path for /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.
  813. [ 7.526383] init: service 'console' requires console
  814. [ 7.526430] enable_store: android_usb: already disabled
  815. [ 7.526547] init: Starting service 'adbd'...
  816. [ 7.527098] init: Starting service 'per_proxy'...
  817. [ 7.527620] init: Starting service 'ppd'...
  818. [ 7.527998] init: cannot find '/system/bin/update_verifier' (No such file or directory), di
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!