Advertisement
Guest User

Milhouse #1104 sdtv_mode=2 02_system

a guest
Nov 4th, 2019
204
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.88 KB | None | 0 0
  1. ################################################################################
  2. # ... output of dmesg
  3. # LibreELEC release: RPi2.arm-devel-20191104210935-#1104-gcfe1640
  4. #
  5. ################################################################################
  6. [ 0.000000] Booting Linux on physical CPU 0x0
  7. [ 0.000000] Linux version 5.3.8 (milhouse@libreelec.tv) (gcc version 9.2.0 (GCC)) #1 SMP Mon Nov 4 21:10:10 GMT 2019
  8. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  9. [ 0.000000] CPU: div instructions available: patching division code
  10. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  11. [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
  12. [ 0.000000] Memory policy: Data cache writealloc
  13. [ 0.000000] cma: Reserved 8 MiB at 0x2f800000
  14. [ 0.000000] On node 0 totalpages: 196608
  15. [ 0.000000] Normal zone: 1728 pages used for memmap
  16. [ 0.000000] Normal zone: 0 pages reserved
  17. [ 0.000000] Normal zone: 196608 pages, LIFO batch:63
  18. [ 0.000000] percpu: Embedded 20 pages/cpu s50508 r8192 d23220 u81920
  19. [ 0.000000] pcpu-alloc: s50508 r8192 d23220 u81920 alloc=20*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880
  22. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=960 bcm2708_fb.fbheight=576 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=0309-4515 disk=UUID=bbd27efd-34b7-4f97-b101-681692c6eeee quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  25. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  26. [ 0.000000] Memory: 750388K/786432K available (10240K kernel code, 729K rwdata, 2336K rodata, 5120K init, 532K bss, 27852K reserved, 8192K cma-reserved)
  27. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  28. [ 0.000000] ftrace: allocating 32088 entries in 63 pages
  29. [ 0.000000] rcu: Hierarchical RCU implementation.
  30. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  31. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  32. [ 0.000000] random: get_random_bytes called from start_kernel+0x36c/0x534 with crng_init=0
  33. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  34. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  35. [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  36. [ 0.000018] Switching to timer-based delay loop, resolution 52ns
  37. [ 0.000287] Console: colour dummy device 80x30
  38. [ 0.000313] printk: console [tty0] enabled
  39. [ 0.000363] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  40. [ 0.000383] pid_max: default: 32768 minimum: 301
  41. [ 0.000639] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  42. [ 0.000661] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  43. [ 0.001455] *** VALIDATE proc ***
  44. [ 0.001928] Disabling memory control group subsystem
  45. [ 0.001962] *** VALIDATE cgroup1 ***
  46. [ 0.001976] *** VALIDATE cgroup2 ***
  47. [ 0.001995] CPU: Testing write buffer coherency: ok
  48. [ 0.002523] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  49. [ 0.003410] Setting up static identity map for 0x100000 - 0x10003c
  50. [ 0.003573] rcu: Hierarchical SRCU implementation.
  51. [ 0.005947] smp: Bringing up secondary CPUs ...
  52. [ 0.007036] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  53. [ 0.008184] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  54. [ 0.009283] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  55. [ 0.009441] smp: Brought up 1 node, 4 CPUs
  56. [ 0.009458] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  57. [ 0.009468] CPU: All CPU(s) started in HYP mode.
  58. [ 0.009477] CPU: Virtualization extensions available.
  59. [ 0.010357] devtmpfs: initialized
  60. [ 0.025582] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  61. [ 0.025856] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  62. [ 0.025882] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  63. [ 0.026526] pinctrl core: initialized pinctrl subsystem
  64. [ 0.027625] NET: Registered protocol family 16
  65. [ 0.031581] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  66. [ 0.036833] cpuidle: using governor ladder
  67. [ 0.036878] cpuidle: using governor menu
  68. [ 0.037492] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  69. [ 0.037503] hw-breakpoint: maximum watchpoint size is 8 bytes.
  70. [ 0.037756] Serial: AMBA PL011 UART driver
  71. [ 0.041931] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  72. [ 0.095812] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
  73. [ 0.097979] SCSI subsystem initialized
  74. [ 0.098274] usbcore: registered new interface driver usbfs
  75. [ 0.098335] usbcore: registered new interface driver hub
  76. [ 0.098455] usbcore: registered new device driver usb
  77. [ 0.103765] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-01 14:48, variant start_x
  78. [ 0.107109] raspberrypi-firmware soc:firmware: Firmware hash is 4955a975fa196c323bd72801881d5d4992f0cbbb
  79. [ 0.110901] Advanced Linux Sound Architecture Driver Initialized.
  80. [ 0.112247] clocksource: Switched to clocksource arch_sys_counter
  81. [ 1.256065] FS-Cache: Loaded
  82. [ 1.266840] thermal_sys: Registered thermal governor 'step_wise'
  83. [ 1.267235] NET: Registered protocol family 2
  84. [ 1.267939] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  85. [ 1.267983] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  86. [ 1.268098] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  87. [ 1.268288] TCP: Hash tables configured (established 8192 bind 8192)
  88. [ 1.268449] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  89. [ 1.268501] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  90. [ 1.268788] NET: Registered protocol family 1
  91. [ 1.269540] RPC: Registered named UNIX socket transport module.
  92. [ 1.269551] RPC: Registered udp transport module.
  93. [ 1.269561] RPC: Registered tcp transport module.
  94. [ 1.269570] RPC: Registered tcp NFSv4.1 backchannel transport module.
  95. [ 1.288638] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  96. [ 1.292172] Initialise system trusted keyrings
  97. [ 1.292556] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  98. [ 1.303444] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  99. [ 1.304366] FS-Cache: Netfs 'nfs' registered for caching
  100. [ 1.305122] NFS: Registering the id_resolver key type
  101. [ 1.305168] Key type id_resolver registered
  102. [ 1.305178] Key type id_legacy registered
  103. [ 1.305199] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  104. [ 1.305695] FS-Cache: Netfs 'cifs' registered for caching
  105. [ 1.306192] Key type cifs.idmap registered
  106. [ 1.359239] NET: Registered protocol family 38
  107. [ 1.359259] Key type asymmetric registered
  108. [ 1.359271] Asymmetric key parser 'x509' registered
  109. [ 1.359281] Asymmetric key parser 'pkcs8' registered
  110. [ 1.359335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  111. [ 1.359348] io scheduler mq-deadline registered
  112. [ 1.359359] io scheduler kyber registered
  113. [ 1.359525] io scheduler bfq registered
  114. [ 1.365017] bcm2708_fb soc:fb: FB found 1 display(s)
  115. [ 1.371847] Console: switching to colour frame buffer device 120x36
  116. [ 1.377152] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 960x576
  117. [ 1.379844] bcm2835-rng 3f104000.rng: hwrng registered
  118. [ 1.380326] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  119. [ 1.380972] vc-sm: Videocore shared memory driver
  120. [ 1.395795] brd: module loaded
  121. [ 1.395929] loop: module loaded
  122. [ 1.419634] usbcore: registered new interface driver rtsx_usb
  123. [ 1.420634] Loading iSCSI transport class v2.0-870.
  124. [ 1.421145] iscsi: registered transport (tcp)
  125. [ 1.421700] libphy: Fixed MDIO Bus: probed
  126. [ 1.421744] tun: Universal TUN/TAP device driver, 1.6
  127. [ 1.422009] usbcore: registered new interface driver lan78xx
  128. [ 1.422064] usbcore: registered new interface driver dm9601
  129. [ 1.422127] usbcore: registered new interface driver smsc95xx
  130. [ 1.422171] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  131. [ 1.650457] Core Release: 2.80a
  132. [ 1.650470] Setting default values for core params
  133. [ 1.650499] Finished setting default values for core params
  134. [ 1.850865] Using Buffer DMA mode
  135. [ 1.850876] Periodic Transfer Interrupt Enhancement - disabled
  136. [ 1.850886] Multiprocessor Interrupt Enhancement - disabled
  137. [ 1.850898] OTG VER PARAM: 0, OTG VER FLAG: 0
  138. [ 1.850925] Dedicated Tx FIFOs mode
  139. [ 1.851514] WARN::dwc_otg_hcd_init:1043: FIQ DMA bounce buffers: virt = af904000 dma = 0xef904000 len=9024
  140. [ 1.851544] FIQ FSM acceleration enabled for :
  141. [ 1.851544] Non-periodic Split Transactions
  142. [ 1.851544] Periodic Split Transactions
  143. [ 1.851544] High-Speed Isochronous Endpoints
  144. [ 1.851544] Interrupt/Control Split Transaction hack enabled
  145. [ 1.851556] dwc_otg: Microframe scheduler enabled
  146. [ 1.851628] WARN::hcd_init_fiq:457: FIQ on core 1
  147. [ 1.851638] WARN::hcd_init_fiq:458: FIQ ASM at 80797430 length 36
  148. [ 1.851649] WARN::hcd_init_fiq:496: MPHI regs_base at b0810000
  149. [ 1.851670] dwc_otg 3f980000.usb: DWC OTG Controller
  150. [ 1.851708] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  151. [ 1.851755] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
  152. [ 1.851807] Init: Port Power? op_state=1
  153. [ 1.851816] Init: Power Port (0)
  154. [ 1.852168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
  155. [ 1.852185] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  156. [ 1.852199] usb usb1: Product: DWC OTG Controller
  157. [ 1.852213] usb usb1: Manufacturer: Linux 5.3.8 dwc_otg_hcd
  158. [ 1.852257] usb usb1: SerialNumber: 3f980000.usb
  159. [ 1.852948] hub 1-0:1.0: USB hub found
  160. [ 1.853010] hub 1-0:1.0: 1 port detected
  161. [ 1.853771] dwc_otg: FIQ enabled
  162. [ 1.853781] dwc_otg: NAK holdoff enabled
  163. [ 1.853791] dwc_otg: FIQ split-transaction FSM enabled
  164. [ 1.853805] Module dwc_common_port init
  165. [ 1.854105] usbcore: registered new interface driver usb-storage
  166. [ 1.854340] mousedev: PS/2 mouse device common for all mice
  167. [ 1.854778] i2c /dev entries driver
  168. [ 1.856740] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  169. [ 1.856991] bcm2835-cpufreq: min=600000 max=1200000
  170. [ 1.857931] sdhci: Secure Digital Host Controller Interface driver
  171. [ 1.857941] sdhci: Copyright(c) Pierre Ossman
  172. [ 1.858523] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
  173. [ 1.859280] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
  174. [ 1.859488] sdhci-pltfm: SDHCI platform and OF driver helper
  175. [ 1.861579] ledtrig-cpu: registered to indicate activity on CPUs
  176. [ 1.861691] hidraw: raw HID events driver (C) Jiri Kosina
  177. [ 1.863214] usbcore: registered new interface driver usbhid
  178. [ 1.863219] usbhid: USB HID core driver
  179. [ 1.863777] vchiq: vchiq_init_state: slot_zero = (ptrval)
  180. [ 1.864888] [vc_sm_connected_init]: start
  181. [ 1.871829] [vc_sm_connected_init]: end - returning 0
  182. [ 1.874617] NET: Registered protocol family 10
  183. [ 1.875761] Segment Routing with IPv6
  184. [ 1.875891] NET: Registered protocol family 17
  185. [ 1.876030] Key type dns_resolver registered
  186. [ 1.876453] Registering SWP/SWPB emulation handler
  187. [ 1.877138] Loading compiled-in X.509 certificates
  188. [ 1.886530] uart-pl011 3f201000.serial: cts_event_workaround enabled
  189. [ 1.886620] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
  190. [ 1.888294] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  191. [ 1.889966] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
  192. [ 1.889981] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
  193. [ 1.916386] sdhost: log_buf @ (ptrval) (ef907000)
  194. [ 1.953174] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  195. [ 1.954847] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  196. [ 1.956496] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  197. [ 1.959478] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  198. [ 1.965938] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  199. [ 1.968666] printk: console [netcon0] enabled
  200. [ 1.968675] netconsole: network logging started
  201. [ 1.968686] of_cfs_init
  202. [ 1.968712] of_cfs_init: OK
  203. [ 1.969097] ALSA device list:
  204. [ 1.969115] No soundcards found.
  205. [ 1.992178] Freeing unused kernel memory: 5120K
  206. [ 1.992434] Run /init as init process
  207. [ 2.027381] random: fast init done
  208. [ 2.045845] Checking disk(s): UUID=0309-4515 UUID=bbd27efd-34b7-4f97-b101-681692c6eeee
  209. [ 2.059136] Indeed it is in host mode hprt0 = 00021501
  210. [ 2.070362] mmc1: new high speed SDIO card at address 0001
  211. [ 2.110150] mmc0: host does not support reading read-only switch, assuming write-enable
  212. [ 2.112981] mmc0: new high speed SDHC card at address 4929
  213. [ 2.113745] mmcblk0: mmc0:4929 SD16G 14.9 GiB
  214. [ 2.115649] mmcblk0: p1 p2
  215. [ 2.242324] usb 1-1: new high-speed USB device number 2 using dwc_otg
  216. [ 2.242476] Indeed it is in host mode hprt0 = 00001101
  217. [ 2.442612] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
  218. [ 2.442630] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  219. [ 2.443300] hub 1-1:1.0: USB hub found
  220. [ 2.443413] hub 1-1:1.0: 5 ports detected
  221. [ 2.722272] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  222. [ 2.812676] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
  223. [ 2.812696] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  224. [ 2.815507] smsc95xx v1.0.6
  225. [ 2.870288] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:eb:cf:bd
  226. [ 2.959043] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
  227. [ 3.053973] usb 1-1.4: New USB device found, idVendor=05ac, idProduct=1001, bcdDevice= 2.10
  228. [ 3.053993] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  229. [ 3.054007] usb 1-1.4: Product: Hub in Apple USB Keyboard
  230. [ 3.054021] usb 1-1.4: Manufacturer: Alps Electric
  231. [ 3.054973] hub 1-1.4:1.0: USB hub found
  232. [ 3.055451] hub 1-1.4:1.0: 3 ports detected
  233. [ 3.186602] fsck: CP437: Invalid argument
  234. [ 3.186602] fsck: fsck.fat 4.1 (2017-01-24)
  235. [ 3.186602] fsck: /dev/mmcblk0p1: 219 files, 16017/65501 clusters
  236. [ 3.186602] fsck: STORAGE: clean, 15820/3784704 files, 2536814/15134720 blocks
  237. [ 3.335678] usb 1-1.4.1: new low-speed USB device number 5 using dwc_otg
  238. [ 3.457850] usb 1-1.4.1: New USB device found, idVendor=05ac, idProduct=0202, bcdDevice= 1.03
  239. [ 3.457871] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  240. [ 3.457885] usb 1-1.4.1: Product: Apple USB Keyboard
  241. [ 3.457899] usb 1-1.4.1: Manufacturer: Alps Electric
  242. [ 3.473045] input: Alps Electric Apple USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1:1.0/0003:05AC:0202.0001/input/input0
  243. [ 3.529362] hid-generic 0003:05AC:0202.0001: input,hidraw0: USB HID v1.00 Keyboard [Alps Electric Apple USB Keyboard] on usb-3f980000.usb-1.4.1/input0
  244. [ 3.566573] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  245. [ 4.729036] systemd[1]: System time before build time, advancing clock.
  246. [ 4.744553] systemd[1]: systemd 243 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  247. [ 4.745048] systemd[1]: Detected architecture arm.
  248. [ 4.747525] systemd[1]: Set hostname to <LibreELEC>.
  249. [ 4.974534] random: systemd: uninitialized urandom read (16 bytes read)
  250. [ 4.975637] systemd[1]: Created slice User and Session Slice.
  251. [ 4.975819] random: systemd: uninitialized urandom read (16 bytes read)
  252. [ 4.975973] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  253. [ 4.976029] random: systemd: uninitialized urandom read (16 bytes read)
  254. [ 4.976165] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  255. [ 4.976415] systemd[1]: Reached target Paths.
  256. [ 4.976504] systemd[1]: Reached target Slices.
  257. [ 4.989656] systemd[1]: Listening on RPCbind Server Activation Socket.
  258. [ 4.989827] systemd[1]: Reached target RPC Port Mapper.
  259. [ 5.362967] kernel-overlays-setup: setup base modules
  260. [ 5.425434] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.3.8
  261. [ 5.464953] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  262. [ 5.465139] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  263. [ 5.466579] kernel-overlays-setup: done
  264. [ 5.811357] systemd-journald[236]: Received client request to flush runtime journal.
  265. [ 7.082529] random: crng init done
  266. [ 7.082541] random: 7 urandom warning(s) missed due to ratelimiting
  267. [ 7.797633] Console: switching to colour dummy device 80x30
  268. [ 8.272447] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  269. [ 8.287978] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  270. [ 8.525833] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  271. [ 8.573623] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
  272. [ 8.578297] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
  273. [ 8.578500] usbcore: registered new interface driver brcmfmac
  274. [ 8.893699] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2
  275. [ 9.109722] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
  276. [ 9.157270] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: May 2 2019 02:39:18 version 7.45.98.83 (r714225 CY) FWID 01-e539531f
  277. [ 9.486826] uart-pl011 3f201000.serial: no DMA platform data
  278. [ 9.503863] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  279. [ 9.661993] 8021q: 802.1Q VLAN Support v1.8
  280. [ 9.857066] brcmfmac: power management disabled
  281. [ 11.124135] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  282. [ 14.430934] Bluetooth: Core ver 2.22
  283. [ 14.430999] NET: Registered protocol family 31
  284. [ 14.431004] Bluetooth: HCI device and connection manager initialized
  285. [ 14.431025] Bluetooth: HCI socket layer initialized
  286. [ 14.431035] Bluetooth: L2CAP socket layer initialized
  287. [ 14.431052] Bluetooth: SCO socket layer initialized
  288. [ 14.503381] Bluetooth: HCI UART driver ver 2.3
  289. [ 14.503396] Bluetooth: HCI UART protocol H4 registered
  290. [ 14.503451] Bluetooth: HCI UART protocol Three-wire (H5) registered
  291. [ 14.503660] Bluetooth: HCI UART protocol Broadcom registered
  292. [ 14.680535] cryptd: max_cpu_qlen set to 1000
  293.  
  294. ################################################################################
  295. # ... output of lsmod
  296. # LibreELEC release: RPi2.arm-devel-20191104210935-#1104-gcfe1640
  297. #
  298. ################################################################################
  299. Module Size Used by
  300. aes_arm_bs 20480 2
  301. crypto_simd 16384 1 aes_arm_bs
  302. cryptd 20480 2 crypto_simd
  303. hci_uart 45056 1
  304. btbcm 16384 1 hci_uart
  305. serdev 20480 1 hci_uart
  306. bluetooth 442368 23 hci_uart,btbcm
  307. ecdh_generic 16384 2 bluetooth
  308. ecc 36864 1 ecdh_generic
  309. 8021q 28672 0
  310. brcmfmac 270336 0
  311. brcmutil 20480 1 brcmfmac
  312. bcm2835_gpiomem 16384 0
  313. cfg80211 557056 1 brcmfmac
  314. rfkill 24576 5 bluetooth,cfg80211
  315. fixed 20480 0
  316.  
  317. ################################################################################
  318. # ... output of ps xa
  319. # LibreELEC release: RPi2.arm-devel-20191104210935-#1104-gcfe1640
  320. #
  321. ################################################################################
  322. PID USER TIME COMMAND
  323. 1 root 0:03 /usr/lib/systemd/systemd
  324. 2 root 0:00 [kthreadd]
  325. 3 root 0:00 [rcu_gp]
  326. 4 root 0:00 [rcu_par_gp]
  327. 5 root 0:00 [kworker/0:0-eve]
  328. 6 root 0:00 [kworker/0:0H-kb]
  329. 7 root 0:00 [kworker/u8:0-fl]
  330. 8 root 0:00 [mm_percpu_wq]
  331. 9 root 0:00 [ksoftirqd/0]
  332. 10 root 0:00 [rcu_sched]
  333. 11 root 0:00 [migration/0]
  334. 12 root 0:00 [cpuhp/0]
  335. 13 root 0:00 [cpuhp/1]
  336. 14 root 0:00 [migration/1]
  337. 15 root 0:00 [ksoftirqd/1]
  338. 16 root 0:00 [kworker/1:0-eve]
  339. 17 root 0:00 [kworker/1:0H-kb]
  340. 18 root 0:00 [cpuhp/2]
  341. 19 root 0:00 [migration/2]
  342. 20 root 0:00 [ksoftirqd/2]
  343. 21 root 0:00 [kworker/2:0-eve]
  344. 22 root 0:00 [kworker/2:0H-kb]
  345. 23 root 0:00 [cpuhp/3]
  346. 24 root 0:00 [migration/3]
  347. 25 root 0:00 [ksoftirqd/3]
  348. 26 root 0:00 [kworker/3:0-eve]
  349. 27 root 0:00 [kworker/3:0H-kb]
  350. 28 root 0:00 [kdevtmpfs]
  351. 29 root 0:00 [netns]
  352. 30 root 0:00 [kworker/0:1-eve]
  353. 31 root 0:00 [kworker/1:1-rcu]
  354. 32 root 0:00 [oom_reaper]
  355. 33 root 0:00 [writeback]
  356. 34 root 0:00 [kcompactd0]
  357. 36 root 0:00 [kworker/u8:1-cf]
  358. 83 root 0:00 [kworker/3:1-eve]
  359. 93 root 0:00 [kblockd]
  360. 94 root 0:00 [blkcg_punt_bio]
  361. 95 root 0:00 [watchdogd]
  362. 96 root 0:00 [rpciod]
  363. 97 root 0:00 [kworker/u9:0-hc]
  364. 98 root 0:00 [xprtiod]
  365. 107 root 0:00 [kswapd0]
  366. 108 root 0:00 [nfsiod]
  367. 109 root 0:00 [cifsiod]
  368. 110 root 0:00 [cifsoplockd]
  369. 113 root 0:00 [kworker/2:1-cgr]
  370. 114 root 0:00 [iscsi_eh]
  371. 115 root 0:00 [dwc_otg]
  372. 116 root 0:00 [DWC Notificatio]
  373. 117 root 0:00 [kworker/2:2-eve]
  374. 118 root 0:00 [vchiq-slot/0]
  375. 119 root 0:00 [vchiq-recy/0]
  376. 120 root 0:00 [vchiq-sync/0]
  377. 121 root 0:00 [vchiq-keep/0]
  378. 122 root 0:00 [SMIO]
  379. 123 root 0:00 [ipv6_addrconf]
  380. 124 root 0:00 [kworker/0:2-eve]
  381. 125 root 0:00 [kworker/0:3-eve]
  382. 150 root 0:00 [mmc_complete]
  383. 151 root 0:00 [kworker/0:1H-mm]
  384. 153 root 0:00 [kworker/3:1H-kb]
  385. 154 root 0:00 [kworker/2:1H-kb]
  386. 155 root 0:00 [kworker/0:2H-kb]
  387. 157 root 0:00 [kworker/1:1H]
  388. 158 root 0:00 [kworker/1:2H-kb]
  389. 169 root 0:00 [loop0]
  390. 171 root 0:00 [jbd2/mmcblk0p2-]
  391. 172 root 0:00 [ext4-rsv-conver]
  392. 173 root 0:00 [kworker/1:2-eve]
  393. 205 root 0:00 [kworker/3:2-cgr]
  394. 206 root 0:00 [kworker/3:2H-kb]
  395. 236 root 0:00 /usr/lib/systemd/systemd-journald
  396. 248 root 0:00 [kworker/2:3-eve]
  397. 252 root 0:00 /usr/bin/rpcbind -f
  398. 254 root 0:00 [kworker/1:3-eve]
  399. 274 root 0:00 /usr/lib/systemd/systemd-udevd
  400. 287 dbus 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
  401. 288 root 0:00 /usr/sbin/eventlircd -f --evmap=/etc/eventlircd.d --socket=/run/lirc/lircd
  402. 291 root 0:00 /usr/bin/pulseaudio --system --disallow-exit --exit-idle-time=-1 --disable-shm
  403. 297 root 0:00 /sbin/crond -f -S
  404. 305 root 0:00 [kworker/2:2H-kb]
  405. 309 root 0:00 /usr/lib/systemd/systemd-logind
  406. 353 root 0:00 [cfg80211]
  407. 354 root 0:00 [kworker/0:4-eve]
  408. 380 root 0:00 [brcmf_wq/mmc1:0]
  409. 381 root 0:00 [brcmf_wdog/mmc1]
  410. 385 root 0:00 /usr/sbin/sshd -D
  411. 393 root 0:00 /usr/sbin/connmand -nr --config=/etc/connman/main.conf
  412. 398 avahi 0:00 avahi-daemon: running [IngridsKodi.local]
  413. 413 root 0:00 [kworker/u8:2-ev]
  414. 415 root 0:00 /usr/bin/wpa_supplicant -u
  415. 416 root 0:00 /usr/sbin/nmbd
  416. 418 root 0:00 /usr/sbin/smbd
  417. 421 root 0:00 {smbd-notifyd} /usr/sbin/smbd
  418. 422 root 0:00 {cleanupd} /usr/sbin/smbd
  419. 426 root 0:00 {kodi.sh} /bin/sh /usr/lib/kodi/kodi.sh --standalone -fs
  420. 427 root 0:00 {lpqd} /usr/sbin/smbd
  421. 431 root 0:04 /usr/lib/kodi/kodi.bin --standalone -fs
  422. 439 root 0:00 /usr/bin/hciattach /dev/serial1 bcm43xx 921600 noflow - b8:27:eb:41:65:17
  423. 440 root 0:00 [kworker/u9:1-hc]
  424. 442 root 0:00 [kworker/u9:2-hc]
  425. 443 root 0:00 /usr/lib/bluetooth/bluetoothd
  426. 446 root 0:00 [cryptd]
  427. 495 root 0:00 /usr/sbin/smbd
  428. 496 root 0:00 {createlog} /bin/sh /usr/bin/createlog
  429. 524 root 0:00 ps xa
  430.  
  431. ################################################################################
  432. # ... output of cat /storage/.config/modprobe.d/disable-spdif-for-hd-audio.conf
  433. # LibreELEC release: RPi2.arm-devel-20191104210935-#1104-gcfe1640
  434. #
  435. ################################################################################
  436. # INTEL HBR WORKAROUND FOR DTS-MA & Dolby TrueHD PLAYBACK
  437.  
  438. # Uncomment the following lines to disable any S/PDIF out to deliver
  439. # bitstreamed audio on Intel builds. This is a rough workaround for
  440. # users that have both S/PDIF and HDMI audio outputs on their motherboard
  441. # or motherboard+discrete graphics combo.
  442.  
  443. # EVEN IF YOU ARE NOT USING THE S/PDIF OUTPUT
  444. # but still have one, you will need to uncomment the lines below !
  445.  
  446. # after uncommenting these lines, you must reboot for these settings to take effect
  447.  
  448. # blacklist snd_hda_codec_realtek
  449. # blacklist snd_hda_codec_sigmatel
  450. # blacklist snd_hda_codec_cirrus
  451.  
  452.  
  453. ################################################################################
  454. # ... output of cat /storage/.config/sysctl.d/transmission.conf
  455. # LibreELEC release: RPi2.arm-devel-20191104210935-#1104-gcfe1640
  456. #
  457. ################################################################################
  458. # transmission with uTP support
  459. # please comment out the follow line to activate this values:
  460.  
  461. # net.core.wmem_max=1048576
  462. # net.core.rmem_max=4194304
  463.  
  464. ################################################################################
  465. # ... output of ls -laR /storage/.config/system.d
  466. # LibreELEC release: RPi2.arm-devel-20191104210935-#1104-gcfe1640
  467. #
  468. ################################################################################
  469. /storage/.config/system.d:
  470. total 37
  471. drwxrwxr-x 2 root root 1024 Nov 4 21:12 .
  472. drwxr-xr-x 16 root root 1024 Sep 3 10:27 ..
  473. -rw-rw-r-- 1 root root 28816 Apr 13 2018 README
  474. -rw-rw-r-- 1 root root 1772 Nov 4 21:12 cifs.mount.sample
  475. -rw-rw-r-- 1 root root 1729 Nov 4 21:12 nfs.mount.sample
  476. -rw-rw-r-- 1 root root 1145 Nov 4 21:12 openvpn.service.sample
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement