API tools faq
paste
Guest User

Untitled

a guest
Dec 20th, 2020
98
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.02 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.2-amd64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: WDC WD6001FSYZ-01SS7B1
  6. Serial Number: WD-WXB1HB4JECP5
  7. LU WWN Device Id: 5 0014ee 20d07cbb7
  8. Firmware Version: ER03
  9. User Capacity: 6,001,175,126,016 bytes [6.00 TB]
  10. Sector Sizes: 512 bytes logical, 4096 bytes physical
  11. Rotation Rate: 7200 rpm
  12. Form Factor: 3.5 inches
  13. Device is: Not in smartctl database [for details use: -P showall]
  14. ATA Version is: ACS-3 T13/2161-D revision 5
  15. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Sun Dec 20 09:25:34 2020 GMT
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19. AAM feature is: Unavailable
  20. APM level is: 1 (minimum power consumption with standby)
  21. Rd look-ahead is: Enabled
  22. Write cache is: Disabled
  23. DSN feature is: Disabled
  24. ATA Security is: Disabled, frozen [SEC2]
  25. Wt Cache Reorder: Enabled
  26.  
  27. === START OF READ SMART DATA SECTION ===
  28. SMART overall-health self-assessment test result: PASSED
  29.  
  30. General SMART Values:
  31. Offline data collection status: (0x82) Offline data collection activity
  32. was completed without error.
  33. Auto Offline Data Collection: Enabled.
  34. Self-test execution status: ( 121) The previous self-test completed having
  35. the read element of the test failed.
  36. Total time to complete Offline
  37. data collection: ( 0) seconds.
  38. Offline data collection
  39. capabilities: (0x7b) SMART execute Offline immediate.
  40. Auto Offline data collection on/off support.
  41. Suspend Offline collection upon new
  42. command.
  43. Offline surface scan supported.
  44. Self-test supported.
  45. Conveyance Self-test supported.
  46. Selective Self-test supported.
  47. SMART capabilities: (0x0003) Saves SMART data before entering
  48. power-saving mode.
  49. Supports SMART auto save timer.
  50. Error logging capability: (0x01) Error logging supported.
  51. General Purpose Logging supported.
  52. Short self-test routine
  53. recommended polling time: ( 2) minutes.
  54. Extended self-test routine
  55. recommended polling time: ( 573) minutes.
  56. Conveyance self-test routine
  57. recommended polling time: ( 6) minutes.
  58. SCT capabilities: (0x003d) SCT Status supported.
  59. SCT Error Recovery Control supported.
  60. SCT Feature Control supported.
  61. SCT Data Table supported.
  62.  
  63. SMART Attributes Data Structure revision number: 16
  64. Vendor Specific SMART Attributes with Thresholds:
  65. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  66. 1 Raw_Read_Error_Rate POSR-K 200 100 051 - 4
  67. 3 Spin_Up_Time POS--K 227 100 021 - 7650
  68. 4 Start_Stop_Count -O--CK 097 097 000 - 3683
  69. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  70. 7 Seek_Error_Rate -OSR-K 100 100 000 - 0
  71. 9 Power_On_Hours -O--CK 060 060 000 - 29924
  72. 10 Spin_Retry_Count -O--CK 100 100 000 - 0
  73. 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
  74. 12 Power_Cycle_Count -O--CK 100 100 000 - 140
  75. 16 Unknown_Attribute -O---K 025 175 000 - 1345838728914
  76. 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
  77. 192 Power-Off_Retract_Count -O--CK 200 100 000 - 68
  78. 193 Load_Cycle_Count -O--CK 199 100 000 - 3672
  79. 194 Temperature_Celsius -O---K 128 097 000 - 24
  80. 196 Reallocated_Event_Count -O--CK 200 100 000 - 0
  81. 197 Current_Pending_Sector -O--CK 196 100 000 - 491
  82. 198 Offline_Uncorrectable ----CK 200 100 000 - 493
  83. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 532
  84. 200 Multi_Zone_Error_Rate ---R-- 198 100 000 - 1013
  85. ||||||_ K auto-keep
  86. |||||__ C event count
  87. ||||___ R error rate
  88. |||____ S speed/performance
  89. ||_____ O updated online
  90. |______ P prefailure warning
  91.  
  92. General Purpose Log Directory Version 1
  93. SMART Log Directory Version 1 [multi-sector log support]
  94. Address Access R/W Size Description
  95. 0x00 GPL,SL R/O 1 Log Directory
  96. 0x01 SL R/O 1 Summary SMART error log
  97. 0x02 SL R/O 5 Comprehensive SMART error log
  98. 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
  99. 0x04 GPL,SL R/O 8 Device Statistics log
  100. 0x06 SL R/O 1 SMART self-test log
  101. 0x07 GPL R/O 1 Extended self-test log
  102. 0x08 GPL R/O 2 Power Conditions log
  103. 0x09 SL R/W 1 Selective self-test log
  104. 0x0a GPL R/W 8 Device Statistics Notification
  105. 0x10 GPL R/O 1 NCQ Command Error log
  106. 0x11 GPL R/O 1 SATA Phy Event Counters log
  107. 0x12 GPL R/O 1 SATA NCQ Non-Data log
  108. 0x13 GPL R/O 1 SATA NCQ Send and Receive log
  109. 0x24 GPL R/O 171 Current Device Internal Status Data log
  110. 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
  111. 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
  112. 0xa0-0xb6 GPL,SL VS 16 Device vendor specific log
  113. 0xb7 GPL,SL VS 40 Device vendor specific log
  114. 0xb8-0xbf GPL,SL VS 16 Device vendor specific log
  115. 0xc0 GPL,SL VS 1 Device vendor specific log
  116. 0xc8-0xca GPL,SL VS 1 Device vendor specific log
  117. 0xe0 GPL,SL R/W 1 SCT Command/Status
  118. 0xe1 GPL,SL R/W 1 SCT Data Transfer
  119.  
  120. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  121. Device Error Count: 1896 (device log contains only the most recent 24 errors)
  122. CR = Command Register
  123. FEATR = Features Register
  124. COUNT = Count (was: Sector Count) Register
  125. LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
  126. LH = LBA High (was: Cylinder High) Register ] LBA
  127. LM = LBA Mid (was: Cylinder Low) Register ] Register
  128. LL = LBA Low (was: Sector Number) Register ]
  129. DV = Device (was: Device/Head) Register
  130. DC = Device Control Register
  131. ER = Error register
  132. ST = Status register
  133. Powered_Up_Time is measured from power on, and printed as
  134. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  135. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  136.  
  137. Error 1896 [23] occurred at disk power-on lifetime: 29900 hours (1245 days + 20 hours)
  138. When the command that caused the error occurred, the device was in standby mode.
  139.  
  140. After command completion occurred, registers were:
  141. ER -- ST COUNT LBA_48 LH LM LL DV DC
  142. -- -- -- == -- == == == -- -- -- -- --
  143. 04 -- 51 00 06 00 00 01 71 c7 32 01 00 Error: ABRT
  144.  
  145. Commands leading to the command that caused the error were:
  146. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  147. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  148. ef 00 10 00 06 00 00 00 00 00 00 00 00 6d+23:22:23.920 SET FEATURES [Enable SATA feature]
  149.  
  150. Error 1895 [22] occurred at disk power-on lifetime: 29882 hours (1245 days + 2 hours)
  151. When the command that caused the error occurred, the device was in standby mode.
  152.  
  153. After command completion occurred, registers were:
  154. ER -- ST COUNT LBA_48 LH LM LL DV DC
  155. -- -- -- == -- == == == -- -- -- -- --
  156. 04 -- 51 00 06 00 00 01 71 c7 32 01 00 Error: ABRT
  157.  
  158. Commands leading to the command that caused the error were:
  159. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  160. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  161. ef 00 10 00 06 00 00 00 00 00 00 00 00 6d+05:33:51.475 SET FEATURES [Enable SATA feature]
  162.  
  163. Error 1894 [21] occurred at disk power-on lifetime: 29855 hours (1243 days + 23 hours)
  164. When the command that caused the error occurred, the device was active or idle.
  165.  
  166. After command completion occurred, registers were:
  167. ER -- ST COUNT LBA_48 LH LM LL DV DC
  168. -- -- -- == -- == == == -- -- -- -- --
  169. 84 -- 41 00 20 00 00 57 a4 00 00 40 00 Error: ICRC, ABRT at LBA = 0x57a40000 = 1470365696
  170.  
  171. Commands leading to the command that caused the error were:
  172. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  173. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  174. 61 00 20 00 18 00 00 57 a4 00 00 40 00 5d+02:34:15.468 WRITE FPDMA QUEUED
  175. 2f 00 00 00 01 00 00 00 00 00 13 a0 08 5d+02:34:15.464 READ LOG EXT
  176. 2f 00 00 00 01 00 00 00 00 00 00 a0 08 5d+02:34:15.452 READ LOG EXT
  177. ef 00 10 00 02 00 00 00 00 00 00 a0 08 5d+02:34:15.414 SET FEATURES [Enable SATA feature]
  178. ec 00 00 00 00 00 00 00 00 00 00 a0 08 5d+02:34:15.388 IDENTIFY DEVICE
  179.  
  180. Error 1893 [20] occurred at disk power-on lifetime: 29855 hours (1243 days + 23 hours)
  181. When the command that caused the error occurred, the device was in an unknown state.
  182.  
  183. After command completion occurred, registers were:
  184. ER -- ST COUNT LBA_48 LH LM LL DV DC
  185. -- -- -- == -- == == == -- -- -- -- --
  186. 84 -- 51 00 01 01 00 00 00 00 00 a0 00 Error: ABRT
  187.  
  188. Commands leading to the command that caused the error were:
  189. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  190. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  191.  
  192. Error 1892 [19] occurred at disk power-on lifetime: 29855 hours (1243 days + 23 hours)
  193. When the command that caused the error occurred, the device was active or idle.
  194.  
  195. After command completion occurred, registers were:
  196. ER -- ST COUNT LBA_48 LH LM LL DV DC
  197. -- -- -- == -- == == == -- -- -- -- --
  198. 84 -- 41 00 48 00 00 57 a4 00 38 40 00 Error: ICRC, ABRT at LBA = 0x57a40038 = 1470365752
  199.  
  200. Commands leading to the command that caused the error were:
  201. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  202. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  203. 61 00 48 00 18 00 00 57 a4 00 38 40 00 5d+02:34:14.494 WRITE FPDMA QUEUED
  204. 2f 00 00 00 01 00 00 00 00 00 13 a0 08 5d+02:34:14.490 READ LOG EXT
  205. 2f 00 00 00 01 00 00 00 00 00 00 a0 08 5d+02:34:14.478 READ LOG EXT
  206. ef 00 10 00 02 00 00 00 00 00 00 a0 08 5d+02:34:14.440 SET FEATURES [Enable SATA feature]
  207. ec 00 00 00 00 00 00 00 00 00 00 a0 08 5d+02:34:14.415 IDENTIFY DEVICE
  208.  
  209. Error 1891 [18] occurred at disk power-on lifetime: 29855 hours (1243 days + 23 hours)
  210. When the command that caused the error occurred, the device was active or idle.
  211.  
  212. After command completion occurred, registers were:
  213. ER -- ST COUNT LBA_48 LH LM LL DV DC
  214. -- -- -- == -- == == == -- -- -- -- --
  215. 84 -- 41 00 20 00 00 57 a4 00 00 40 00 Error: ICRC, ABRT at LBA = 0x57a40000 = 1470365696
  216.  
  217. Commands leading to the command that caused the error were:
  218. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  219. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  220. 61 00 20 00 78 00 00 57 a4 00 00 40 00 5d+02:34:14.019 WRITE FPDMA QUEUED
  221. 2f 00 00 00 01 00 00 00 00 00 13 a0 08 5d+02:34:14.016 READ LOG EXT
  222. 2f 00 00 00 01 00 00 00 00 00 00 a0 08 5d+02:34:14.004 READ LOG EXT
  223. ef 00 10 00 02 00 00 00 00 00 00 a0 08 5d+02:34:13.965 SET FEATURES [Enable SATA feature]
  224. ec 00 00 00 00 00 00 00 00 00 00 a0 08 5d+02:34:13.940 IDENTIFY DEVICE
  225.  
  226. Error 1890 [17] occurred at disk power-on lifetime: 29855 hours (1243 days + 23 hours)
  227. When the command that caused the error occurred, the device was active or idle.
  228.  
  229. After command completion occurred, registers were:
  230. ER -- ST COUNT LBA_48 LH LM LL DV DC
  231. -- -- -- == -- == == == -- -- -- -- --
  232. 84 -- 41 00 48 00 00 57 a4 00 38 40 00 Error: ICRC, ABRT at LBA = 0x57a40038 = 1470365752
  233.  
  234. Commands leading to the command that caused the error were:
  235. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  236. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  237. 61 00 48 00 a0 00 00 57 a4 00 38 40 00 5d+02:34:13.545 WRITE FPDMA QUEUED
  238. 2f 00 00 00 01 00 00 00 00 00 13 a0 08 5d+02:34:13.541 READ LOG EXT
  239. 2f 00 00 00 01 00 00 00 00 00 00 a0 08 5d+02:34:13.529 READ LOG EXT
  240. ef 00 10 00 02 00 00 00 00 00 00 a0 08 5d+02:34:13.491 SET FEATURES [Enable SATA feature]
  241. ec 00 00 00 00 00 00 00 00 00 00 a0 08 5d+02:34:13.466 IDENTIFY DEVICE
  242.  
  243. Error 1889 [16] occurred at disk power-on lifetime: 29855 hours (1243 days + 23 hours)
  244. When the command that caused the error occurred, the device was active or idle.
  245.  
  246. After command completion occurred, registers were:
  247. ER -- ST COUNT LBA_48 LH LM LL DV DC
  248. -- -- -- == -- == == == -- -- -- -- --
  249. 84 -- 51 00 00 00 00 00 00 00 01 a0 00
  250.  
  251. Commands leading to the command that caused the error were:
  252. CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
  253. -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
  254. ec 00 00 00 00 00 00 00 00 00 00 a0 08 5d+02:34:07.876 IDENTIFY DEVICE
  255.  
  256. SMART Extended Self-test Log Version: 1 (1 sectors)
  257. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  258. # 1 Extended offline Completed: read failure 90% 29913 144998032
  259. # 2 Extended offline Completed: read failure 90% 29913 144998032
  260.  
  261. SMART Selective self-test log data structure revision number 1
  262. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  263. 1 0 0 Not_testing
  264. 2 0 0 Not_testing
  265. 3 0 0 Not_testing
  266. 4 0 0 Not_testing
  267. 5 0 0 Not_testing
  268. Selective self-test flags (0x0):
  269. After scanning selected spans, do NOT read-scan remainder of disk.
  270. If Selective self-test is pending on power-up, resume after 0 minute delay.
  271.  
  272. SCT Status Version: 3
  273. SCT Version (vendor specific): 258 (0x0102)
  274. SCT Support Level: 1
  275. Device State: Active (0)
  276. Current Temperature: 24 Celsius
  277. Power Cycle Min/Max Temperature: 23/47 Celsius
  278. Lifetime Min/Max Temperature: 13/55 Celsius
  279. Under/Over Temperature Limit Count: 0/0
  280. Vendor specific:
  281. 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  282. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  283.  
  284. SCT Temperature History Version: 2
  285. Temperature Sampling Period: 1 minute
  286. Temperature Logging Interval: 1 minute
  287. Min/Max recommended Temperature: 0/60 Celsius
  288. Min/Max Temperature Limit: -41/85 Celsius
  289. Temperature History Size (Index): 478 (104)
  290.  
  291. Index Estimated Time Temperature Celsius
  292. 105 2020-12-20 01:28 26 *******
  293. ... ..( 70 skipped). .. *******
  294. 176 2020-12-20 02:39 26 *******
  295. 177 2020-12-20 02:40 25 ******
  296. ... ..(355 skipped). .. ******
  297. 55 2020-12-20 08:36 25 ******
  298. 56 2020-12-20 08:37 24 *****
  299. ... ..( 47 skipped). .. *****
  300. 104 2020-12-20 09:25 24 *****
  301.  
  302. SCT Error Recovery Control:
  303. Read: 70 (7.0 seconds)
  304. Write: 70 (7.0 seconds)
  305.  
  306. Device Statistics (GP Log 0x04)
  307. Page Offset Size Value Flags Description
  308. 0x01 ===== = = === == General Statistics (rev 1) ==
  309. 0x01 0x008 4 140 -D- Lifetime Power-On Resets
  310. 0x01 0x010 4 29924 -D- Power-on Hours
  311. 0x01 0x018 6 109694134420 -D- Logical Sectors Written
  312. 0x01 0x020 6 881330073 -D- Number of Write Commands
  313. 0x01 0x028 6 1236144594494 -D- Logical Sectors Read
  314. 0x01 0x030 6 2725483722 -D- Number of Read Commands
  315. 0x01 0x038 6 352217600 -D- Date and Time TimeStamp
  316. 0x01 0x048 2 2505 ND- Workload Utilization
  317. 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
  318. 0x03 0x008 4 23826 -D- Spindle Motor Power-on Hours
  319. 0x03 0x010 4 23721 -D- Head Flying Hours
  320. 0x03 0x018 4 3741 -D- Head Load Events
  321. 0x03 0x020 4 200 ND- Number of Reallocated Logical Sectors
  322. 0x03 0x028 4 40389 -D- Read Recovery Attempts
  323. 0x03 0x030 4 0 -D- Number of Mechanical Start Failures
  324. 0x03 0x038 4 3944 -D- Number of Realloc. Candidate Logical Sectors
  325. 0x03 0x040 4 68 -D- Number of High Priority Unload Events
  326. 0x04 ===== = = === == General Errors Statistics (rev 1) ==
  327. 0x04 0x008 4 1232 -D- Number of Reported Uncorrectable Errors
  328. 0x04 0x010 4 14 -D- Resets Between Cmd Acceptance and Completion
  329. 0x05 ===== = = === == Temperature Statistics (rev 1) ==
  330. 0x05 0x008 1 24 -D- Current Temperature
  331. 0x05 0x010 1 26 -D- Average Short Term Temperature
  332. 0x05 0x018 1 31 -D- Average Long Term Temperature
  333. 0x05 0x020 1 55 -D- Highest Temperature
  334. 0x05 0x028 1 13 -D- Lowest Temperature
  335. 0x05 0x030 1 47 -D- Highest Average Short Term Temperature
  336. 0x05 0x038 1 24 -D- Lowest Average Short Term Temperature
  337. 0x05 0x040 1 43 -D- Highest Average Long Term Temperature
  338. 0x05 0x048 1 29 -D- Lowest Average Long Term Temperature
  339. 0x05 0x050 4 0 -D- Time in Over-Temperature
  340. 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature
  341. 0x05 0x060 4 0 -D- Time in Under-Temperature
  342. 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature
  343. 0x06 ===== = = === == Transport Statistics (rev 1) ==
  344. 0x06 0x008 4 5471 -D- Number of Hardware Resets
  345. 0x06 0x010 4 99 -D- Number of ASR Events
  346. 0x06 0x018 4 535 -D- Number of Interface CRC Errors
  347. |||_ C monitored condition met
  348. ||__ D supports DSN
  349. |___ N normalized value
  350.  
  351. Pending Defects log (GP Log 0x0c) not supported
  352.  
  353. SATA Phy Event Counters (GP Log 0x11)
  354. ID Size Value Description
  355. 0x0001 2 532 Command failed due to ICRC error
  356. 0x0002 2 183 R_ERR response for data FIS
  357. 0x0003 2 19 R_ERR response for device-to-host data FIS
  358. 0x0004 2 164 R_ERR response for host-to-device data FIS
  359. 0x0005 2 1081 R_ERR response for non-data FIS
  360. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  361. 0x0007 2 1081 R_ERR response for host-to-device non-data FIS
  362. 0x0008 2 0 Device-to-host non-data FIS retries
  363. 0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy
  364. 0x000a 2 576 Device-to-host register FISes sent due to a COMRESET
  365. 0x000b 2 344 CRC errors within host-to-device FIS
  366. 0x000d 2 1086 Non-CRC errors within host-to-device FIS
  367. 0x000f 2 159 R_ERR response for host-to-device data FIS, CRC
  368. 0x0012 2 185 R_ERR response for host-to-device non-data FIS, CRC
  369. 0x8000 4 0 Vendor specific
  370.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!