Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.14.22_1 (void-buildslave@build) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sun Feb 25 11:39:26 UTC 2018
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.22_1 root=UUID=6774b4d7-cfa8-4663-9709-8efab91e4ff4 ro apci=force loglevel=4 slub_debug=P page_poison=1 apci=force
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
- [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
- [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted''normal', was 'performance'
- [ 0.123514] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.123519] mce: CPU supports 10 MCE banks
- [ 0.123528] CPU0: Thermal monitoring enabled (TM1)
- [ 0.123545] process: using mwait in idle threads
- [ 0.123547] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
- [ 0.123548] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.123549] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.123549] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
- [ 0.124078] Freeing SMP alternatives memory: 24K
- [ 0.132155] smpboot: Max logical packages: 2
- [ 0.132160] DMAR: Host address width 39
- [ 0.132161] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
- [ 0.132177] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
- [ 0.132178] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
- [ 0.132188] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
- [ 0.132188] DMAR: RMRR base: 0x0000006e69e000 end: 0x0000006e6bdfff
- [ 0.132195] DMAR: RMRR base: 0x00000079000000 end: 0x0000007b7fffff
- [ 0.132201] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
- [ 0.132201] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
- [ 0.132203] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
- [ 0.132204] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
- [ 0.132204] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
- [ 0.133491] DMAR-IR: Enabled IRQ remapping in x2apic mode
- [ 0.133492] x2apic enabled
- [ 0.133503] Switched APIC routing to cluster x2apic.
- [ 0.137636] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.147668] TSC deadline timer enabled
- [ 0.147673] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
- [ 0.151024] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
- [ 0.151078] ... version: 4
- [ 0.151078] ... bit width: 48
- [ 0.151079] ... generic registers: 4
- [ 0.151079] ... value mask: 0000ffffffffffff
- [ 0.151080] ... max period: 00007fffffffffff
- [ 0.151080] ... fixed-purpose events: 3
- [ 0.151081] ... event mask: 000000070000000f
- [ 0.153007] Hierarchical SRCU implementation.
- [ 0.157271] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.159006] smp: Bringing up secondary CPUs ...
- [ 0.167046] x86: Booting SMP configuration:
- [ 0.167047] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
- [ 0.215394] smp: Brought up 1 node, 8 CPUs
- [ 0.215394] smpboot: Total of 8 processors activated (44928.00 BogoMIPS)
- [ 0.216404] devtmpfs: initialized
- [ 0.216404] x86/mm: Memory block size: 128MB
- [ 0.219324] PM: Registering ACPI NVS region [mem 0x673c9000-0x673c9fff] (4096 bytes)
- [ 0.219324] PM: Registering ACPI NVS region [mem 0x6f37e000-0x6fb95fff] (8486912 bytes)
- [ 0.220925] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.220936] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.221017] pinctrl core: initialized pinctrl subsystem
- [ 0.222153] NET: Registered protocol family 16
- [ 0.222566] cpuidle: using governor ladder
- [ 0.222566] cpuidle: using governor menu
- [ 0.222566] Simple Boot Flag at 0x47 set to 0x1
- [ 0.222566] ACPI: bus type PCI registered
- [ 0.222566] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.222566] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.222566] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.222566] PCI: Using configuration type 1 for base access
- [ 0.225042] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.225042] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.226098] ACPI: Added _OSI(Module Device)
- [ 0.226099] ACPI: Added _OSI(Processor Device)
- [ 0.226100] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.226100] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.232960] ACPI: Executed 38 blocks of module-level executable AML code
- [ 0.281509] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
- [ 0.293194] ACPI: Dynamic OEM Table Load:
- [ 0.293200] ACPI: SSDT 0xFFFF8A7AB0A80000 000651 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
- [ 0.293670] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.293840] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
- [ 0.298889] ACPI: Dynamic OEM Table Load:
- [ 0.298893] ACPI: SSDT 0xFFFF8A7AB0A078F0 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
- [ 0.299283] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.300546] ACPI: Dynamic OEM Table Load:
- [ 0.300551] ACPI: SSDT 0xFFFF8A7AB0A81010 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
- [ 0.302331] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.302736] ACPI: Dynamic OEM Table Load:
- [ 0.302739] ACPI: SSDT 0xFFFF8A7AB09F8618 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
- [ 0.303164] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.313219] ACPI: EC: EC started
- [ 0.313219] ACPI: EC: interrupt blocked
- [ 0.314165] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
- [ 0.314168] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x46, EC_CMD/EC_SC=0x66, EC_DATA=0x62
- [ 0.314170] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
- [ 0.314170] ACPI: Interpreter enabled
- [ 0.314236] ACPI: (supports S0 S3 S4 S5)
- [ 0.314237] ACPI: Using IOAPIC for interrupt routing
- [ 0.314322] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.316740] ACPI: Enabled 6 GPEs in block 00 to 7F
- [ 0.324905] ACPI: Power Resource [PG00] (on)
- [ 0.347327] ACPI: Power Resource [PG01] (on)
- [ 0.348848] ACPI: Power Resource [PG02] (on)
- [ 0.359092] ACPI: Power Resource [WRST] (on)
- [ 0.360280] ACPI: Power Resource [WRST] (on)
- [ 0.361449] ACPI: Power Resource [WRST] (on)
- [ 0.362591] ACPI: Power Resource [WRST] (on)
- [ 0.363709] ACPI: Power Resource [WRST] (on)
- [ 0.364812] ACPI: Power Resource [WRST] (on)
- [ 0.365891] ACPI: Power Resource [WRST] (on)
- [ 0.367010] ACPI: Power Resource [WRST] (on)
- [ 0.368240] ACPI: Power Resource [WRST] (on)
- [ 0.369459] ACPI: Power Resource [WRST] (on)
- [ 0.371093] ACPI: Power Resource [WRST] (on)
- [ 0.372261] ACPI: Power Resource [WRST] (on)
- [ 0.373403] ACPI: Power Resource [WRST] (on)
- [ 0.374520] ACPI: Power Resource [WRST] (on)
- [ 0.375622] ACPI: Power Resource [WRST] (on)
- [ 0.376697] ACPI: Power Resource [WRST] (on)
- [ 0.377762] ACPI: Power Resource [WRST] (on)
- [ 0.382279] ACPI: Power Resource [WRST] (on)
- [ 0.383452] ACPI: Power Resource [WRST] (on)
- [ 0.384600] ACPI: Power Resource [WRST] (on)
- [ 0.446795] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.446806] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.451869] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.454830] PCI host bridge to bus 0000:00
- [ 0.454834] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.454837] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 0.454840] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.454843] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
- [ 0.454846] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
- [ 0.454849] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
- [ 0.454851] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
- [ 0.454854] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
- [ 0.454857] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
- [ 0.454860] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
- [ 0.454862] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
- [ 0.454865] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
- [ 0.454868] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
- [ 0.454870] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
- [ 0.454873] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
- [ 0.454875] pci_bus 0000:00: root bus resource [mem 0x7b800000-0xdfffffff window]
- [ 0.454878] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
- [ 0.454880] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.454888] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
- [ 0.455375] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
- [ 0.455425] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.456162] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
- [ 0.456172] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
- [ 0.456177] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
- [ 0.456181] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
- [ 0.456203] pci 0000:00:02.0: BAR 2: assigned to efifb
- [ 0.456765] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
- [ 0.456776] pci 0000:00:04.0: reg 0x10: [mem 0xdf320000-0xdf327fff 64bit]
- [ 0.457447] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
- [ 0.457480] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
- [ 0.457590] pci 0000:00:14.0: PME# supported from D3hot D3cold
- [ 0.458377] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
- [ 0.458409] pci 0000:00:14.2: reg 0x10: [mem 0xdf338000-0xdf338fff 64bit]
- [ 0.459086] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
- [ 0.459350] pci 0000:00:15.0: reg 0x10: [mem 0xdf337000-0xdf337fff 64bit]
- [ 0.460701] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
- [ 0.460732] pci 0000:00:16.0: reg 0x10: [mem 0xdf336000-0xdf336fff 64bit]
- [ 0.460826] pci 0000:00:16.0: PME# supported from D3hot
- [ 0.461470] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
- [ 0.461498] pci 0000:00:17.0: reg 0x10: [mem 0xdf330000-0xdf331fff]
- [ 0.461509] pci 0000:00:17.0: reg 0x14: [mem 0xdf335000-0xdf3350ff]
- [ 0.461521] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
- [ 0.461532] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
- [ 0.461543] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
- [ 0.461555] pci 0000:00:17.0: reg 0x24: [mem 0xdf334000-0xdf3347ff]
- [ 0.461628] pci 0000:00:17.0: PME# supported from D3hot
- [ 0.462236] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
- [ 0.462369] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.462388] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
- [ 0.463113] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
- [ 0.463246] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.463267] pci 0000:00:1c.5: Intel SPT PCH root port ACS workaround enabled
- [ 0.464044] pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
- [ 0.464308] pci 0000:00:1e.0: reg 0x10: [mem 0xdf333000-0xdf333fff 64bit]
- [ 0.465656] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
- [ 0.466341] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
- [ 0.466359] pci 0000:00:1f.2: reg 0x10: [mem 0xdf32c000-0xdf32ffff]
- [ 0.466996] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
- [ 0.467026] pci 0000:00:1f.3: reg 0x10: [mem 0xdf328000-0xdf32bfff 64bit]
- [ 0.467055] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
- [ 0.467119] pci 0000:00:1f.3: PME# supported from D3hot D3cold
- [ 0.467864] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
- [ 0.467925] pci 0000:00:1f.4: reg 0x10: [mem 0xdf332000-0xdf3320ff 64bit]
- [ 0.467996] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
- [ 0.468732] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
- [ 0.468746] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
- [ 0.468754] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.468761] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
- [ 0.468766] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
- [ 0.468771] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
- [ 0.472013] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 0.472015] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
- [ 0.472018] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
- [ 0.472021] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
- [ 0.472218] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.472252] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
- [ 0.472280] pci 0000:02:00.0: reg 0x18: [mem 0xdf204000-0xdf204fff 64bit]
- [ 0.472297] pci 0000:02:00.0: reg 0x20: [mem 0xdf200000-0xdf203fff 64bit]
- [ 0.472428] pci 0000:02:00.0: supports D1 D2
- [ 0.472429] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.475041] pci 0000:00:1c.0: PCI bridge to [bus 02]
- [ 0.475046] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
- [ 0.475050] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
- [ 0.475512] pci 0000:03:00.0: [8086:3165] type 00 class 0x028000
- [ 0.475674] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
- [ 0.476221] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold"device:75" under DMAR at fed91000 as 00:15.0
- [ 1.034211] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:1e.0
- [ 1.034219] DMAR: No ATSR found
- [ 1.034317] DMAR: dmar0: Using Queued invalidation
- [ 1.034328] dmar0: Allocated order 8 PASID table.
- [ 1.034331] DMAR: dmar1: Using Queued invalidation
- [ 1.034452] DMAR: Setting RMRR:
- [ 1.034584] DMAR: Setting identity map for device 0000:00:02.0 [0x79000000 - 0x7b7fffff]
- [ 1.034666] DMAR: Setting identity map for device 0000:00:14.0 [0x6e69e000 - 0x6e6bdfff]
- [ 1.034673] DMAR: Prepare 0-16MiB unity mapping for LPC
- [ 1.034763] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
- [ 1.034994] DMAR: Intel(R) Virtualization Technology for Directed I/O
- [ 1.035100] iommu: Adding device 0000:00:00.0 to group 0
- [ 1.035126] iommu: Adding device 0000:00:01.0 to group 1
- [ 1.035146] iommu: Adding device 0000:00:02.0 to group 2
- [ 1.035167] iommu: Adding device 0000:00:04.0 to group 3
- [ 1.035193] iommu: Adding device 0000:00:14.0 to group 4
- [ 1.035209] iommu: Adding device 0000:00:14.2 to group 4
- [ 1.035231] iommu: Adding device 0000:00:15.0 to group 5
- [ 1.035251] iommu: Adding device 0000:00:16.0 to group 6
- [ 1.035271] iommu: Adding device 0000:00:17.0 to group 7
- [ 1.035297] iommu: Adding device 0000:00:1c.0 to group 8
- [ 1.035320] iommu: Adding device 0000:00:1c.5 to group 9
- [ 1.035340] iommu: Adding device 0000:00:1e.0 to group 10
- [ 1.035366] iommu: Adding device 0000:00:1f.0 to group 11
- [ 1.035382] iommu: Adding device 0000:00:1f.2 to group 11
- [ 1.035396] iommu: Adding device 0000:00:1f.3 to group 11
- [ 1.035411] iommu: Adding device 0000:00:1f.4 to group 11
- [ 1.035423] iommu: Adding device 0000:01:00.0 to group 1
- [ 1.035442] iommu: Adding device 0000:02:00.0 to group 12
- [ 1.035461] iommu: Adding device 0000:03:00.0 to group 13
- [ 1.041219] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
- [ 1.041516] Scanning for low memory corruption every 60 seconds
- [ 1.041895] audit: initializing netlink subsys (disabled)
- [ 1.042030] audit: type=2000 audit(1519653729.041:1): state=initialized audit_enabled=0 res=1
- [ 1.042592] Initialise system trusted keyrings
- [ 1.042688] workingset: timestamp_bits=40 max_order=22 bucket_order=0
- [ 1.045538] zbud: loaded
- [ 1.047330] Key type asymmetric registered
- [ 1.047331] Asymmetric key parser 'x509' registered
- [ 1.047373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 1.047451] io scheduler noop registered
- [ 1.047452] io scheduler deadline registered
- [ 1.047525] io scheduler cfq registered (default)
- [ 1.047526] io scheduler mq-deadline registered
- [ 1.047527] io scheduler kyber registered
- [ 1.049413] pcieport 0000:00:1c.0: AER enabled with IRQ 124
- [ 1.049453] pcieport 0000:00:1c.5: AER enabled with IRQ 125
- [ 1.049478] pcieport 0000:00:01.0: Signaling PME with IRQ 123
- [ 1.049501] pcieport 0000:00:1c.0: Signaling PME with IRQ 124
- [ 1.049527] pcieport 0000:00:1c.5: Signaling PME with IRQ 125
- [ 1.049571] efifb: probing for efifb
- [ 1.049586] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
- [ 1.049587] efifb: mode is 1920x1080x32, linelength=7680, pages=1
- [ 1.049587] efifb: scrolling: redraw
- [ 1.049588] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 1.053102] Console: switching to colour frame buffer device 240x67
- [ 1.056427] fb0: EFI VGA frame buffer device
- [ 1.056438] intel_idle: MWAIT substates: 0x11142120
- [ 1.056439] intel_idle: v0.4.1 model 0x9E
- [ 1.057726] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 1.058374] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.060297] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- [ 1.060308] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 1.060308] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 1.060328] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 1.060328] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 1.060360] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 1.060361] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 1.060436] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.062627] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.062677] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.062905] mousedev: PS/2 mouse device common for all mice
- [ 1.063020] rtc_cmos 00:02: RTC can wake from S4
- [ 1.063482] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
- [ 1.063569] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 1.063580] intel_pstate: Intel P-state driver initializing
- [ 1.063633] intel_pstate: Disabling energy efficiency optimization
- [ 1.064636] intel_pstate: HWP enabled
- [ 1.065077] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.065079] EFI Variables Facility v0.08 2004-May-17
- [ 1.077372] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.117400] NET: Registered protocol family 10
- [ 1.121273] Segment Routing with IPv6
- [ 1.121290] NET: Registered protocol family 17
- [ 1.121438] Key type dns_resolver registered
- [ 1.122501] microcode: sig=0x906e9, pf=0x20, revision=0x5e
- [ 1.122834] microcode: Microcode Update Driver: v2.2.
- [ 1.122844] sched_clock: Marking stable (1122817356, 0)->(1147347688, -24530332)
- [ 1.123035] registered taskstats version 1
- [ 1.123035] Loading compiled-in X.509 certificates
- [ 1.123076] zswap: loaded using pool lzo/zbud
- [ 1.125952] rtc_cmos 00:02: setting system clock to 2018-02-26 14:02:09 UTC (1519653729)
- [ 1.127296] Freeing unused kernel memory: 1804K
- [ 1.127297] Write protecting the kernel read-only data: 16384k
- [ 1.127763] Freeing unused kernel memory: 2024K
- [ 1.129929] Freeing unused kernel memory: 1884K
- [ 1.129995] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.129995] x86/mm: Checking user space page tables
- [ 1.130035] x86/mm: Checked W+X mappings: passed, no W+X pages found.
- [ 1.173728] dracut: dracut-046
- [ 1.261248] device-mapper: uevent: version 1.0.3
- [ 1.261430] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
- [ 1.275199] systemd-udevd[285]: starting version 3.2.5
- [ 1.276847] udevd[286]: starting eudev-3.2.5
- [ 1.289116] dracut: rd.md=0: removing MD RAID activation
- [ 1.335970] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 1.335995] ACPI: Sleep Button [SLPB]
- [ 1.336154] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
- [ 1.336181] ACPI: Power Button [PWRB]
- [ 1.341150] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
- [ 1.355304] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.356159] Linux agpgart interface v0.103
- [ 1.361629] SCSI subsystem initialized
- [ 1.364402] ACPI: bus type USB registered
- [ 1.364474] usbcore: registered new interface driver usbfs
- [ 1.364671] usbcore: registered new interface driver hub
- [ 1.364710] usbcore: registered new device driver usb
- [ 1.370529] AVX2 version of gcm_enc/dec engaged.
- [ 1.370530] AES CTR mode by8 optimization enabled
- [ 1.372259] libata version 3.00 loaded.
- [ 1.373044] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
- [ 1.374709] ahci 0000:00:17.0: version 3.0
- [ 1.385222] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
- [ 1.385224] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
- [ 1.388885] scsi host0: ahci
- [ 1.389373] scsi host1: ahci
- [ 1.389780] scsi host2: ahci
- [ 1.389870] ata1: SATA max UDMA/133 abar m2048@0xdf334000 port 0xdf334100 irq 126
- [ 1.389871] ata2: DUMMY
- [ 1.389875] ata3: SATA max UDMA/133 abar m2048@0xdf334000 port 0xdf334200 irq 126
- [ 1.390244] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 1.390251] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- [ 1.391459] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
- [ 1.391464] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 1.391833] hub 1-0:1.0: USB hub found
- [ 1.391887] hub 1-0:1.0: 16 ports detected
- [ 1.395678] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 1.395681] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- [ 1.396033] hub 2-0:1.0: USB hub found
- [ 1.396111] hub 2-0:1.0: 8 ports detected
- [ 1.397638] usb: port power management may be unreliable
- [ 1.412530] ACPI: Lid Switch [LID0]
- [ 1.412738] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
- [ 1.412881] ACPI: Power Button [PWRF]
- [ 1.475137] [drm] Memory usable by graphics device = 4096M
- [ 1.475137] [drm] VT-d active for gfx access
- [ 1.475139] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
- [ 1.475140] fb: switching to inteldrmfb from EFI VGA
- [ 1.475159] Console: switching to colour dummy device 80x25
- [ 1.475350] [drm] Replacing VGA console driver
- [ 1.481263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.481263] [drm] Driver supports precise vblank timestamp query.
- [ 1.483426] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 1.483760] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
- [ 1.493285] MXM: GUID detected in BIOS
- [ 1.493380] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
- [ 1.493629] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
- [ 1.493641] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170728/nsarguments-100)
- [ 1.494932] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
- [ 1.494959] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
- [ 1.494959] nouveau: detected PR support, will not use DSM
- [ 1.494990] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
- [ 1.496591] nouveau 0000:01:00.0: NVIDIA GP107 (137000a1)
- [ 1.499999] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 1.501254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
- [ 1.501483] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
- [ 1.501586] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input7
- [ 1.511937] fbcon: inteldrmfb (fb0) is primary device
- [ 1.539659] nouveau 0000:01:00.0: bios: version 86.07.3b.00.1f
- [ 1.596622] nouveau 0000:01:00.0: fb: 4096 MiB GDDR5
- [ 1.600767] vga_switcheroo: enabled
- [ 1.601002] [TTM] Zone kernel: Available graphics memory: 8130332 kiB
- [ 1.601024] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 1.601024] [TTM] Initializing pool allocator
- [ 1.601041] [TTM] Initializing DMA pool allocator
- [ 1.601069] nouveau 0000:01:00.0: DRM: VRAM: 4096 MiB
- [ 1.601070] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
- [ 1.601071] nouveau 0000:01:00.0: DRM: BIT table 'A' not found
- [ 1.601072] nouveau 0000:01:00.0: DRM: BIT table 'L' not found
- [ 1.601073] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
- [ 1.601074] nouveau 0000:01:00.0: DRM: DCB version 4.1
- [ 1.701470] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.701497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.702540] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 1.702542] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.702544] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1.702550] ata3.00: ATA-9: HP SSD S700 Pro 1TB, Q0504B, max UDMA/100
- [ 1.702551] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.702767] ata1.00: ATA-10: TOSHIBA THNSNK128GVN8 M.2 2280 128GB, K8DC4101, max UDMA/100
- [ 1.702768] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.703125] ata3.00: configured for UDMA/100
- [ 1.703933] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- [ 1.703934] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- [ 1.703936] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- [ 1.704361] ata1.00: configured for UDMA/100
- [ 1.704729] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNK12 4101 PQ: 0 ANSI: 5
- [ 1.705745] scsi 2:0:0:0: Direct-Access ATA HP SSD S700 Pro 4B PQ: 0 ANSI: 5
- [ 1.721043] usb 1-4: new high-speed USB device number 2 using xhci_hcd
- [ 1.936194] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
- [ 1.936201] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
- [ 2.047449] clocksource: Switched to clocksource tsc
- [ 2.086173] usb 1-5: new full-speed USB device number 3 using xhci_hcd
- [ 2.329176] usb 1-7: new high-speed USB device number 4 using xhci_hcd
- [ 2.461629] usbcore: registered new interface driver rtsx_usb
- [ 2.637378] Console: switching to colour frame buffer device 240x67
- [ 2.660312] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 2.673224] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
- [ 2.673225] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 2.673233] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.673234] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.673252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.673363] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
- [ 2.673365] sd 2:0:0:0: [sdb] 4096-byte physical blocks
- [ 2.673383] sd 2:0:0:0: [sdb] Write Protect is off
- [ 2.673384] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.673412] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.674513] sda: sda1 sda2 sda3
- [ 2.674915] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.675484] sdb: sdb1
- [ 2.675941] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 2.719312] [drm] RC6 on
- [ 2.743555] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
- [ 2.743556] EXT4-fs (sda3): write access will be enabled during recovery
- [ 2.761519] EXT4-fs (sda3): recovery complete
- [ 2.767362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.825978] dracut: Checking ext4: /dev/disk/by-uuid/6774b4d7-cfa8-4663-9709-8efab91e4ff4
- [ 2.826262] dracut: issuing e2fsck -a /dev/disk/by-uuid/6774b4d7-cfa8-4663-9709-8efab91e4ff4
- [ 2.841231] dracut: /dev/disk/by-uuid/6774b4d7-cfa8-4663-9709-8efab91e4ff4: clean, 255665/5685248 files, 2994027/22738769 blocks
- [ 2.845069] dracut: Mounting /dev/disk/by-uuid/6774b4d7-cfa8-4663-9709-8efab91e4ff4 with -o defaults,ro
- [ 2.857572] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.908021] dracut: Mounted root filesystem /dev/sda3
- [ 2.960420] dracut: Switching root
- [ 3.062096] fuse init (API version 7.26)
- [ 3.086005] raid6: sse2x1 gen() 11964 MB/s
- [ 3.103003] raid6: sse2x1 xor() 9195 MB/s
- [ 3.120023] raid6: sse2x2 gen() 15718 MB/s
- [ 3.137004] raid6: sse2x2 xor() 10587 MB/s
- [ 3.154002] raid6: sse2x4 gen() 18183 MB/s
- [ 3.171004] raid6: sse2x4 xor() 10970 MB/s
- [ 3.188004] raid6: avx2x1 gen() 25507 MB/s
- [ 3.205003] raid6: avx2x1 xor() 17546 MB/s
- [ 3.222002] raid6: avx2x2 gen() 31375 MB/s
- [ 3.239002] raid6: avx2x2 xor() 19382 MB/s
- [ 3.256002] raid6: avx2x4 gen() 35207 MB/s
- [ 3.273003] raid6: avx2x4 xor() 20480 MB/s
- [ 3.273003] raid6: using algorithm avx2x4 gen() 35207 MB/s
- [ 3.273004] raid6: .... xor() 20480 MB/s, rmw enabled
- [ 3.273004] raid6: using avx2x2 recovery algorithm
- [ 3.276727] xor: automatically using best checksumming function avx
- [ 3.305996] Btrfs loaded, crc32c=crc32c-intel
- [ 3.312727] loop: module loaded
- [ 3.316128] tun: Universal TUN/TAP device driver, 1.6
- [ 3.320853] PPP generic driver version 2.4.2
- [ 3.328773] VFIO - User Level meta-driver version: 0.3
- [ 3.345340] Bluetooth: Core ver 2.22
- [ 3.345359] NET: Registered protocol family 31
- [ 3.345360] Bluetooth: HCI device and connection manager initialized
- [ 3.345362] Bluetooth: HCI socket layer initialized
- [ 3.345365] Bluetooth: L2CAP socket layer initialized
- [ 3.345369] Bluetooth: SCO socket layer initialized
- [ 3.357931] NET: Registered protocol family 40
- [ 3.379117] udevd[622]: starting version 3.2.5
- [ 3.400503] udevd[623]: starting eudev-3.2.5
- [ 3.443754] ACPI: AC Adapter [ADP1] (off-line)
- [ 3.443955] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
- [ 3.445971] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 3.449909] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
- [ 3.451872] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
- [ 3.451951] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
- [ 3.453680] ACPI: Battery Slot [BAT0] (battery present)
- [ 3.467383] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 3.468180] idma64 idma64.0: Found Intel integrated DMA 64-bit
- [ 3.468194] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
- [ 3.468250] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
- [ 3.468251] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
- [ 3.468252] RAPL PMU: hw unit of domain package 2^-14 Joules
- [ 3.468252] RAPL PMU: hw unit of domain dram 2^-14 Joules
- [ 3.468253] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
- [ 3.468254] RAPL PMU: hw unit of domain psys 2^-14 Joules
- [ 3.469946] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
- [ 3.470474] idma64 idma64.1: Found Intel integrated DMA 64-bit
- [ 3.470979] i801_smbus 0000:00:1f.4: SPD Write Disable is set
- [ 3.471013] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
- [ 3.472270] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffa49f8193d000, f4:8e:38:f6:69:e0, XID 14100800 IRQ 130
- [ 3.472271] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 3.476685] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
- [ 3.481450] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
- [ 3.494680] dell-wmi 9DBB5994-A997-11DA-B012-B622A1EF5492: Detected Dell WMI interface version 0
- [ 3.494779] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
- [ 3.499215] Intel(R) Wireless WiFi driver for Linux
- [ 3.499216] Copyright(c) 2003- 2015 Intel Corporation
- [ 3.499293] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
- [ 3.504545] iwlwifi 0000:03:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
- [ 3.516812] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
- [ 3.517146] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
- [ 3.529156] intel_rapl: Found RAPL domain package
- [ 3.529157] intel_rapl: Found RAPL domain core
- [ 3.529158] intel_rapl: Found RAPL domain uncore
- [ 3.529159] intel_rapl: Found RAPL domain dram
- [ 3.529294] r8169 0000:02:00.0 enp2s0: renamed from eth0
- [ 3.537513] iTCO_vendor_support: vendor-support=0
- [ 3.541158] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- [ 3.541370] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
- [ 3.541580] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 3.555161] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
- [ 3.573192] iwlwifi 0000:03:00.0: base HW address: bc:a8:a6:b7:b7:9f
- [ 3.581575] ahci 0000:00:17.0: port does not support device sleep
- [ 3.584592] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- [ 3.584594] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 3.584595] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- [ 3.584596] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
- [ 3.584597] snd_hda_codec_realtek hdaudioC0D0: inputs:
- [ 3.584598] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
- [ 3.584600] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
- [ 3.584601] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
- [ 3.592815] ahci 0000:00:17.0: port does not support device sleep
- [ 3.642060] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
- [ 3.642821] thermal thermal_zone6: failed to read out thermal zone (-61)
- [ 3.643501] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
- [ 3.645653] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
- [ 3.645842] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
- [ 3.646028] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
- [ 3.646204] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
- [ 3.646371] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
- [ 3.646555] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
- [ 3.647363] dw-apb-uart.1: ttyS0 at MMIO 0xdf333000 (irq = 20, base_baud = 115200) is a 16550A
- [ 3.649561] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
- [ 3.668792] i2c_hid i2c-ELAN1010:00: i2c-ELAN1010:00 supply vdd not found, using dummy regulator
- [ 3.716714] hid-multitouch 0018:04F3:3012.0001: Ignoring the extra HID_DG_INPUTMODE
- [ 3.716942] input: ELAN1010:00 04F3:3012 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-19/i2c-ELAN1010:00/0018:04F3:3012.0001/input/input20
- [ 3.717443] hid-multitouch 0018:04F3:3012.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1010:00 04F3:3012] on i2c-ELAN1010:00
- [ 4.523527] usbcore: registered new interface driver btusb
- [ 4.525555] media: Linux media interface: v0.10
- [ 4.537780] Bluetooth: hci0: read Intel version: 370810011003110e00
- [ 4.544220] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
- [ 4.551198] Linux video capture interface: v2.00
- [ 4.597940] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b8a)
- [ 4.607070] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
- [ 4.607074] uvcvideo 1-4:1.0: Entity type for entity Extension 3 was not initialized!
- [ 4.607077] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
- [ 4.607080] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
- [ 4.607391] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input21
- [ 4.607719] usbcore: registered new interface driver uvcvideo
- [ 4.607721] USB Video Class driver (1.1.1)
- [ 4.612743] random: crng init done
- [ 4.689054] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 4.762752] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
- [ 4.980035] EXT4-fs (sda3): re-mounted. Opts: (null)
- [ 5.128927] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.152813] Adding 33554428k swap on /dev/sda2. Priority:-2 extents:1 across:33554428k SSFS
- [ 5.327738] udevd[919]: starting version 3.2.5
- [ 5.353823] 8021q: 802.1Q VLAN Support v1.8
- [ 5.362125] udevd[919]: starting eudev-3.2.5
- [ 5.546600] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
- [ 5.612202] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
- [ 5.652903] r8169 0000:02:00.0 enp2s0: link down
- [ 5.653013] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
- [ 5.771851] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 5.771853] Bluetooth: BNEP filters: protocol multicast
- [ 5.771857] Bluetooth: BNEP socket layer initialized
- [ 6.063751] nouveau 0000:01:00.0: gr: intr 00000040
- [ 6.769063] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
- [ 8.820738] wlp3s0: authenticate with f0:7f:06:50:9c:bc
- [ 8.820915] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
- [ 8.820929] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 8.820938] pcieport 0000:00:1c.5: device [8086:a115] error status/mask=00000001/00002000
- [ 8.820945] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 8.825190] wlp3s0: send auth to f0:7f:06:50:9c:bc (try 1/3)
- [ 8.826511] wlp3s0: authenticated
- [ 8.827029] wlp3s0: associate with f0:7f:06:50:9c:bc (try 1/3)
- [ 8.829561] wlp3s0: RX AssocResp from f0:7f:06:50:9c:bc (capab=0x111 status=0 aid=69)
- [ 8.830839] wlp3s0: associated
- [ 8.919366] wlp3s0: Limiting TX power to 15 dBm as advertised by f0:7f:06:50:9c:bc
- [ 9.330396] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
- [ 36.831319] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
- [ 36.831335] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 36.831347] pcieport 0000:00:1c.5: device [8086:a115] error status/mask=00000001/00002000
- [ 36.831355] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 53.215374] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
- [ 53.215388] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 53.215398] pcieport 0000:00:1c.5: device [8086:a115] error status/mask=00000001/00002000
- [ 53.215405] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 71.268891] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
- [ 71.268898] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 71.268902] pcieport 0000:00:1c.5: device [8086:a115] error status/mask=00000001/00002000
- [ 71.268904] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 72.831667] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
- [ 72.831673] pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
- [ 72.831676] pcieport 0000:00:1c.5: device [8086:a115] error status/mask=00000001/00002000
- [ 72.831678] pcieport 0000:00:1c.5: [ 0] Receiver Error (First)
- [ 101.389290] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement