Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Xilinx Zynq
- [ 0.000000] cma: CMA: reserved 128 MiB at 16800000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 126976
- [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
- [ 0.000000] Normal zone: 992 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 126976 pages, LIFO batch:31
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
- [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
- [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
- [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
- [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
- [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] ps7-slcr mapped to df802000
- [ 0.000000] zynq_clock_init: clkc starts at df802100
- [ 0.000000] Zynq clock init
- [ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
- [ 0.000309] ps7-ttc #0 at df804000, irq=43
- [ 0.000617] Console: colour dummy device 80x30
- [ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
- [ 0.040206] pid_max: default: 32768 minimum: 301
- [ 0.040422] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.040441] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.042580] CPU: Testing write buffer coherency: ok
- [ 0.042920] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.042978] Setting up static identity map for 0x4c4b00 - 0x4c4b58
- [ 0.043205] L310 cache controller enabled
- [ 0.043225] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
- [ 0.121034] CPU1: Booted secondary processor
- [ 0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.210359] Brought up 2 CPUs
- [ 0.210378] SMP: Total of 2 processors activated.
- [ 0.210386] CPU: All CPU(s) started in SVC mode.
- [ 0.211077] devtmpfs: initialized
- [ 0.213479] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 0.214688] regulator-dummy: no parameters
- [ 0.222362] NET: Registered protocol family 16
- [ 0.224650] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.226945] cpuidle: using governor ladder
- [ 0.226958] cpuidle: using governor menu
- [ 0.234409] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
- [ 0.235931] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.235945] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.236060] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
- [ 0.257871] bio: create slab <bio-0> at 0
- [ 0.259291] vgaarb: loaded
- [ 0.259987] SCSI subsystem initialized
- [ 0.260994] usbcore: registered new interface driver usbfs
- [ 0.261211] usbcore: registered new interface driver hub
- [ 0.261431] usbcore: registered new device driver usb
- [ 0.261967] media: Linux media interface: v0.10
- [ 0.262126] Linux video capture interface: v2.00
- [ 0.262369] pps_core: LinuxPPS API ver. 1 registered
- [ 0.262381] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.262506] PTP clock support registered
- [ 0.262861] EDAC MC: Ver: 3.0.0
- [ 0.263932] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.266782] DMA-API: preallocated 4096 debug entries
- [ 0.266795] DMA-API: debugging enabled by kernel config
- [ 0.266870] Switched to clocksource arm_global_timer
- [ 0.287428] NET: Registered protocol family 2
- [ 0.288085] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.288142] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.288227] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.288271] TCP: reno registered
- [ 0.288288] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.288320] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.288559] NET: Registered protocol family 1
- [ 0.288912] RPC: Registered named UNIX socket transport module.
- [ 0.288925] RPC: Registered udp transport module.
- [ 0.288933] RPC: Registered tcp transport module.
- [ 0.288941] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.288955] PCI: CLS 0 bytes, default 64
- [ 0.289392] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.291420] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.293524] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- [ 0.293710] msgmni has been set to 967
- [ 0.294483] io scheduler noop registered
- [ 0.294496] io scheduler deadline registered
- [ 0.294541] io scheduler cfq registered (default)
- [ 0.302400] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
- [ 0.302421] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
- [ 0.426771] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
- [ 0.994227] console [ttyPS0] enabled
- [ 0.998503] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
- [ 1.006114] [drm] Initialized drm 1.1.0 20060810
- [ 1.023080] brd: module loaded
- [ 1.032459] loop: module loaded
- [ 1.041890] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 1.047953] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 1.055714] libphy: XEMACPS mii bus: probed
- [ 1.060354] ------------- phy_id = 0x3625e62
- [ 1.065096] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
- [ 1.073707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.080373] ehci-pci: EHCI PCI platform driver
- [ 1.087626] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
- [ 1.094430] usbcore: registered new interface driver usb-storage
- [ 1.101348] mousedev: PS/2 mouse device common for all mice
- [ 1.107470] i2c /dev entries driver
- [ 1.114391] zynq-edac f8006000.ps7-ddrc: ecc not enabled
- [ 1.119917] cpufreq_cpu0: failed to get cpu0 regulator: -19
- [ 1.125783] Xilinx Zynq CpuIdle Driver started
- [ 1.130666] sdhci: Secure Digital Host Controller Interface driver
- [ 1.136761] sdhci: Copyright(c) Pierre Ossman
- [ 1.141129] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.146928] mmc0: no vqmmc regulator found
- [ 1.150940] mmc0: no vmmc regulator found
- [ 1.186891] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
- [ 1.195579] usbcore: registered new interface driver usbhid
- [ 1.201088] usbhid: USB HID core driver
- [ 1.205794] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
- [ 1.212092] nand: Micron MT29F2G08ABAEAWP
- [ 1.216056] nand: 256MiB, SLC, page size: 2048, OOB size: 64
- [ 1.222008] Bad block table found at page 131008, version 0x01
- [ 1.228238] Bad block table found at page 130944, version 0x01
- [ 1.234292] 3 ofpart partitions found on MTD device pl353-nand
- [ 1.240074] Creating 3 MTD partitions on "pl353-nand":
- [ 1.245169] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
- [ 1.253249] 0x000002000000-0x00000b000000 : "angstram-rootfs"
- [ 1.260566] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
- [ 1.269521] TCP: cubic registered
- [ 1.272755] NET: Registered protocol family 17
- [ 1.277465] Registering SWP/SWPB emulation handler
- [ 1.283345] regulator-dummy: disabling
- [ 1.287696] UBI: attaching mtd1 to ubi0
- [ 1.813546] UBI: scanning is finished
- [ 1.825181] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
- [ 1.832258] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 1.839021] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 1.845685] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 1.852563] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
- [ 1.858543] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 1.865651] UBI: max/mean erase counter: 18/10, WL threshold: 4096, image sequence number: 45215581
- [ 1.874693] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
- [ 1.883909] UBI: background thread "ubi_bgt0d" started, PID 1080
- [ 1.883915] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.887875] ALSA device list:
- [ 1.887878] No soundcards found.
- [ 1.904270] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
- [ 1.933220] UBIFS: recovery needed
- [ 2.041535] UBIFS: recovery completed
- [ 2.045212] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 2.051194] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 2.060268] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
- [ 2.070155] UBIFS: reserved for root: 0 bytes (0 KiB)
- [ 2.075184] UBIFS: media format: w4/r0 (latest is w4/r0), UUID AC39E1D1-8B0D-4257-BDBB-BC8731B2C953, small LPT model
- [ 2.086485] VFS: Mounted root (ubifs filesystem) on device 0:11.
- [ 2.093446] devtmpfs: mounted
- [ 2.096551] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
- [ 2.931494] random: dd urandom read with 0 bits of entropy available
- [ 3.316912]
- [ 3.316912] bcm54xx_config_init
- [ 3.926918]
- [ 3.926918] bcm54xx_config_init
- [ 6.927736] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
- [ 6.933831] xemacps e000b000.ps7-ethernet: link up (100/FULL)
- [ 22.815444] In axi fpga driver!
- [ 22.818543] request_mem_region OK!
- [ 22.821901] AXI fpga dev virtual address is 0xdf9fc000
- [ 22.827063] *base_vir_addr = 0x8c510
- [ 22.842067] In fpga mem driver!
- [ 22.845307] request_mem_region OK!
- [ 22.848926] fpga mem virtual address is 0xe2000000
- [ 23.636305]
- [ 23.636305] bcm54xx_config_init
- [ 24.266242]
- [ 24.266242] bcm54xx_config_init
- [ 27.266818] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
- [ 27.272839] xemacps e000b000.ps7-ethernet: link up (100/FULL)
- [ 533.016809] random: nonblocking pool is initialized
- main.c:13431: log_level = 4
- main.c:13458: This is XILINX board. Totalram: 507527168
- main.c:13470: Detect 512MB control board of XILINX
- driver-bitmain.c:994: forceFreq=-1 forceFlag=0
- main.c:8061: DETECT HW version=0008c510
- main.c:13497: miner ID : 813434464e104814
- main.c:13522: Miner Type = S9
- main.c:13534: AsicType = 1387
- main.c:13537: real AsicNum = 63
- main.c:13630: use critical mode to search freq...
- driver-bitmain.c:2374: get PLUG ON=0x000000e0
- driver-bitmain.c:2444: Find hashboard on Chain[5]
- driver-bitmain.c:2444: Find hashboard on Chain[6]
- driver-bitmain.c:2444: Find hashboard on Chain[7]
- driver-bitmain.c:1831: set_reset_allhashboard = 0x0000ffff
- main.c:1844: Check chain[5] PIC fw version=0x03
- main.c:1844: Check chain[6] PIC fw version=0x03
- main.c:1844: Check chain[7] PIC fw version=0x03
- main.c:8417: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- main.c:8459: has freq in PIC, will disable freq setting.
- main.c:8555: chain[5] has freq in PIC and will jump over...
- main.c:8559: Chain[5] has core num in PIC
- main.c:1844: Check chain[5] PIC fw version=0x03
- main.c:8417: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- main.c:8459: has freq in PIC, will disable freq setting.
- main.c:8555: chain[6] has freq in PIC and will jump over...
- main.c:8559: Chain[6] has core num in PIC
- main.c:8569: Chain[6] ASIC[10] has core num=2
- main.c:1844: Check chain[6] PIC fw version=0x03
- main.c:8417: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- main.c:8459: has freq in PIC, will disable freq setting.
- main.c:8555: chain[7] has freq in PIC and will jump over...
- main.c:8559: Chain[7] has core num in PIC
- main.c:1844: Check chain[7] PIC fw version=0x03
- main.c:8633: get PIC voltage=125 on chain[5], value=870
- main.c:8633: get PIC voltage=125 on chain[6], value=870
- main.c:8633: get PIC voltage=125 on chain[7], value=870
- driver-bitmain.c:1831: set_reset_allhashboard = 0x00000000
- main.c:8796: chain[5] temp offset record: 62,0,0,0,0,0,36,28
- main.c:8814: chain[5] temp chip I2C addr=0x98
- main.c:8820: chain[5] has no middle temp, use special fix mode.
- main.c:8796: chain[6] temp offset record: 62,0,0,0,0,0,36,28
- main.c:8814: chain[6] temp chip I2C addr=0x98
- main.c:8820: chain[6] has no middle temp, use special fix mode.
- main.c:8796: chain[7] temp offset record: 62,0,0,0,0,0,36,28
- main.c:8814: chain[7] temp chip I2C addr=0x98
- main.c:8820: chain[7] has no middle temp, use special fix mode.
- driver-bitmain.c:1831: set_reset_allhashboard = 0x0000ffff
- driver-bitmain.c:1831: set_reset_allhashboard = 0x00000000
- main.c:9048: CRC error counter=0
- main.c:9063: set command mode to VIL
- main.c:9135:
- --- check asic number
- main.c:9232: After Get ASIC NUM CRC error counter=0
- main.c:9255: set_baud=0
- main.c:10169: The min freq=700
- main.c:10171: set real timeout 52, need sleep=379392
- main.c:12291: After TEST CRC error counter=0
- driver-bitmain.c:1831: set_reset_allhashboard = 0x0000ffff
- driver-bitmain.c:1831: set_reset_allhashboard = 0x00000000
- main.c:13656: search freq for 1 times, completed chain = 3, total chain num = 3
- board_frq_tuning.c:583: single_board_frq_tuning enter
- board_frq_tuning.c:584: min_rate, des_rate, fix_volt:13800, 14000, 880
- board_frq_tuning.c:126: force_freq not set, don't need tuning
- driver-bitmain.c:1831: set_reset_allhashboard = 0x0000ffff
- driver-bitmain.c:1831: set_reset_allhashboard = 0x00000000
- main.c:14034: restart Miner chance num=2
- main.c:14074: waiting for receive_func to exit!
- main.c:14088: waiting for pic heart to exit!
- main.c:13391: bmminer not found= 7745 root 0:00 grep bmminer
- main.c:14132: bmminer not found, restart bmminer ...
- This is user mode for mining
- Detect 512MB control board of XILINX
- Miner Type = S9
- Miner compile time: Tue Mar 13 10:15:18 CST 2018 type: Antminer S9iset_reset_allhashboard = 0x0000ffff
- set_reset_allhashboard = 0x00000000
- set_reset_allhashboard = 0x0000ffff
- miner ID : 813434464e104814
- set_reset_allhashboard = 0x0000ffff
- Checking fans!get fan[2] speed=6120
- get fan[2] speed=6120
- get fan[2] speed=6120
- get fan[2] speed=6120
- get fan[2] speed=6120
- get fan[2] speed=6120
- get fan[5] speed=5520
- get fan[2] speed=6120
- get fan[5] speed=5520
- get fan[2] speed=6120
- get fan[5] speed=5520
- chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- Detect: use voltage limit rules on single board!
- Detect: S9_63 use voltage level=1 : 1
- Chain[J6] has backup chain_voltage=870
- Check chain[5] PIC fw version=0x03
- chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- Detect: use voltage limit rules on single board!
- Detect: S9_63 use voltage level=1 : 1
- Chain[J7] has backup chain_voltage=870
- Check chain[6] PIC fw version=0x03
- chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
- Detect: use voltage limit rules on single board!
- Detect: S9_63 use voltage level=1 : 1
- Chain[J8] has backup chain_voltage=870
- Check chain[7] PIC fw version=0x03
- Chain[J6] orignal chain_voltage_pic=125 value=870
- Chain[J7] orignal chain_voltage_pic=125 value=870
- Chain[J8] orignal chain_voltage_pic=125 value=870
- set_reset_allhashboard = 0x0000ffff
- set_reset_allhashboard = 0x00000000
- Chain[J6] has 63 asic
- Chain[J7] has 63 asic
- Chain[J8] has 63 asic
- Chain[J6] has core num in PIC
- Chain[J7] has core num in PIC
- Chain[J7] ASIC[10] has core num=2
- Chain[J8] has core num in PIC
- miner total rate=14003GH/s fixed rate=14000GH/s
- read PIC voltage=940 on chain[5]
- Chain:5 chipnum=63
- Chain[J6] voltage added=0.0V
- Chain:5 temp offset=0
- Chain:5 base freq=650
- Asic[ 0]:650
- Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
- Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
- Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
- Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
- Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
- Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
- Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
- Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
- Chain:5 max freq=650
- Chain:5 min freq=650
- read PIC voltage=940 on chain[6]
- Chain:6 chipnum=63
- Chain[J7] voltage added=0.0V
- Chain:6 temp offset=0
- Chain:6 base freq=650
- Asic[ 0]:650
- Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
- Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
- Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
- Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
- Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
- Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
- Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
- Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
- Chain:6 max freq=650
- Chain:6 min freq=650
- read PIC voltage=940 on chain[7]
- Chain:7 chipnum=63
- Chain[J8] voltage added=0.0V
- Chain:7 temp offset=0
- Chain:7 base freq=650
- Asic[ 0]:650
- Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
- Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
- Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
- Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
- Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
- Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
- Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
- Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
- Chain:7 max freq=650
- Chain:7 min freq=650
- Miner fix freq ...
- read PIC voltage=940 on chain[5]
- Chain:5 chipnum=63
- Chain[J6] voltage added=0.0V
- Chain:5 temp offset=0
- Chain:5 base freq=650
- Asic[ 0]:650
- Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
- Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
- Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
- Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
- Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
- Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
- Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
- Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
- Chain:5 max freq=650
- Chain:5 min freq=650
- read PIC voltage=940 on chain[6]
- Chain:6 chipnum=63
- Chain[J7] voltage added=0.0V
- Chain:6 temp offset=0
- Chain:6 base freq=650
- Asic[ 0]:650
- Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
- Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
- Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
- Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
- Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
- Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
- Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
- Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
- Chain:6 max freq=650
- Chain:6 min freq=650
- read PIC voltage=940 on chain[7]
- Chain:7 chipnum=63
- Chain[J8] voltage added=0.0V
- Chain:7 temp offset=0
- Chain:7 base freq=650
- Asic[ 0]:650
- Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
- Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
- Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
- Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
- Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
- Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
- Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
- Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
- Chain:7 max freq=650
- Chain:7 min freq=650
- max freq = 650
- set baud=1
- Chain[J6] PIC temp offset=62,0,0,0,0,0,36,28
- chain[5] temp chip I2C addr=0x98
- chain[5] has no middle temp, use special fix mode.
- Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
- New offset Chain[5] chip[244] local:36 remote:40 offset:27
- Chain[J6] chip[244] get middle temp offset=27 typeID=55
- Chain[J7] PIC temp offset=62,0,0,0,0,0,36,28
- chain[6] temp chip I2C addr=0x98
- chain[6] has no middle temp, use special fix mode.
- Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
- New offset Chain[6] chip[244] local:35 remote:38 offset:28
- Chain[J7] chip[244] get middle temp offset=28 typeID=55
- Chain[J8] PIC temp offset=62,0,0,0,0,0,36,28
- chain[7] temp chip I2C addr=0x98
- chain[7] has no middle temp, use special fix mode.
- Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
- New offset Chain[7] chip[244] local:35 remote:38 offset:28
- Chain[J8] chip[244] get middle temp offset=28 typeID=55
- single board rate=4668 voltage limit=880 on chain[5]
- get PIC voltage=870 on chain[5], check: must be < 880
- single board rate=4667 voltage limit=880 on chain[6]
- get PIC voltage=870 on chain[6], check: must be < 880
- single board rate=4668 voltage limit=880 on chain[7]
- get PIC voltage=870 on chain[7], check: must be < 880
- Chain[J6] set working voltage=870 [125]
- Chain[J7] set working voltage=870 [125]
- Chain[J8] set working voltage=870 [125]
- setStartTimePoint total_tv_start_sys=245290 total_tv_end_sys=245291
- restartNum = 2 , auto-reinit enabled...
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- Fatal Error: network connection lost!
- do read_temp_func once...
- do check_asic_reg 0x08
- get RT hashrate from Chain[5]: (asic index start from 1-63)
- Asic[01]=78.5000 Asic[02]=72.5780 Asic[03]=72.7790 Asic[04]=72.2250 Asic[05]=72.7120 Asic[06]=70.5810 Asic[07]=80.1110 Asic[08]=82.1410
- Asic[09]=72.3260 Asic[10]=71.2690 Asic[11]=77.1580 Asic[12]=76.1850 Asic[13]=72.7620 Asic[14]=70.8500 Asic[15]=71.7720 Asic[16]=78.8360
- Asic[17]=73.8860 Asic[18]=72.9970 Asic[19]=71.6210 Asic[20]=74.7420 Asic[21]=71.6550 Asic[22]=75.7650 Asic[23]=73.0640 Asic[24]=77.8790
- Asic[25]=77.8960 Asic[26]=75.5470 Asic[27]=76.1850 Asic[28]=71.4870 Asic[29]=73.7190 Asic[30]=72.7620 Asic[31]=70.6320 Asic[32]=69.3400
- Asic[33]=70.4810 Asic[34]=72.1080 Asic[35]=76.2690 Asic[36]=77.5610 Asic[37]=74.1720 Asic[38]=77.9800 Asic[39]=73.0470 Asic[40]=69.4570
- Asic[41]=71.1520 Asic[42]=71.2690 Asic[43]=77.6780 Asic[44]=76.4030 Asic[45]=72.3760 Asic[46]=73.3490 Asic[47]=71.2360 Asic[48]=74.6080
- Asic[49]=72.6780 Asic[50]=70.4970 Asic[51]=75.7150 Asic[52]=66.7060 Asic[53]=70.9500 Asic[54]=72.9470 Asic[55]=75.6310 Asic[56]=76.3190
- Asic[57]=73.8700 Asic[58]=72.6950 Asic[59]=79.6580 Asic[60]=73.2490 Asic[61]=80.3290 Asic[62]=73.8530 Asic[63]=70.2620
- get RT hashrate from Chain[6]: (asic index start from 1-63)
- Asic[01]=73.8860 Asic[02]=75.1110 Asic[03]=72.1420 Asic[04]=79.1380 Asic[05]=75.1950 Asic[06]=70.4130 Asic[07]=72.3260 Asic[08]=75.6820
- Asic[09]=71.5710 Asic[10]=72.6110 Asic[11]=72.4270 Asic[12]=71.0850 Asic[13]=74.8590 Asic[14]=73.9870 Asic[15]=68.5180 Asic[16]=73.1150
- Asic[17]=73.0640 Asic[18]=68.2830 Asic[19]=73.3660 Asic[20]=76.0170 Asic[21]=73.7020 Asic[22]=70.1280 Asic[23]=71.5540 Asic[24]=75.7990
- Asic[25]=73.5000 Asic[26]=67.6620 Asic[27]=73.1480 Asic[28]=71.8900 Asic[29]=70.5480 Asic[30]=77.6440 Asic[31]=71.8400 Asic[32]=74.5740
- Asic[33]=67.8800 Asic[34]=80.0100 Asic[35]=68.9870 Asic[36]=76.6380 Asic[37]=72.5950 Asic[38]=78.7850 Asic[39]=72.9970 Asic[40]=73.0640
- Asic[41]=79.1710 Asic[42]=74.8930 Asic[43]=73.0310 Asic[44]=77.6950 Asic[45]=74.8930 Asic[46]=76.7380 Asic[47]=79.2720 Asic[48]=74.4900
- Asic[49]=72.7960 Asic[50]=72.1580 Asic[51]=80.2780 Asic[52]=81.2010 Asic[53]=73.9030 Asic[54]=72.0910 Asic[55]=72.6620 Asic[56]=75.8660
- Asic[57]=77.3420 Asic[58]=80.3620 Asic[59]=72.4440 Asic[60]=69.2060 Asic[61]=72.8630 Asic[62]=77.6440 Asic[63]=77.0740
- get RT hashrate from Chain[7]: (asic index start from 1-63)
- Asic[01]=75.0780 Asic[02]=72.7960 Asic[03]=71.8730 Asic[04]=74.6580 Asic[05]=71.7890 Asic[06]=74.0540 Asic[07]=66.1350 Asic[08]=73.9870
- Asic[09]=72.1250 Asic[10]=74.7080 Asic[11]=71.9400 Asic[12]=77.1580 Asic[13]=67.3940 Asic[14]=79.6240 Asic[15]=74.5410 Asic[16]=67.9300
- Asic[17]=75.3800 Asic[18]=73.8360 Asic[19]=74.1880 Asic[20]=69.9940 Asic[21]=74.3060 Asic[22]=69.2390 Asic[23]=66.4370 Asic[24]=77.3420
- Asic[25]=78.2320 Asic[26]=76.8890 Asic[27]=78.0300 Asic[28]=75.8830 Asic[29]=74.3900 Asic[30]=73.9870 Asic[31]=72.6280 Asic[32]=72.0580
- Asic[33]=76.5540 Asic[34]=77.3760 Asic[35]=72.6950 Asic[36]=76.4530 Asic[37]=69.8090 Asic[38]=75.4970 Asic[39]=73.9870 Asic[40]=73.7690
- Asic[41]=71.5040 Asic[42]=71.6720 Asic[43]=71.5880 Asic[44]=70.8660 Asic[45]=74.8590 Asic[46]=70.8660 Asic[47]=77.6280 Asic[48]=72.6950
- Asic[49]=73.7860 Asic[50]=75.1950 Asic[51]=70.8660 Asic[52]=71.0010 Asic[53]=68.7690 Asic[54]=71.0010 Asic[55]=69.1720 Asic[56]=73.9370
- Asic[57]=74.8930 Asic[58]=70.8830 Asic[59]=75.6820 Asic[60]=72.1920 Asic[61]=76.7220 Asic[62]=79.3560 Asic[63]=71.0680
- Check Chain[J6] ASIC RT error: (asic index start from 1-63)
- Check Chain[J7] ASIC RT error: (asic index start from 1-63)
- Check Chain[J8] ASIC RT error: (asic index start from 1-63)
- Done check_asic_reg
- do read temp on Chain[5]
- Chain[5] Chip[62] TempTypeID=55 middle offset=27
- Chain[5] Chip[62] local Temp=73
- Chain[5] Chip[62] middle Temp=82
- Special fix Chain[5] Chip[62] middle Temp = 88
- Done read temp on Chain[5]
- do read temp on Chain[6]
- Chain[6] Chip[62] TempTypeID=55 middle offset=28
- Chain[6] Chip[62] local Temp=69
- Chain[6] Chip[62] middle Temp=81
- Special fix Chain[6] Chip[62] middle Temp = 84
- Done read temp on Chain[6]
- do read temp on Chain[7]
- Chain[7] Chip[62] TempTypeID=55 middle offset=28
- Chain[7] Chip[62] local Temp=68
- Chain[7] Chip[62] middle Temp=79
- Special fix Chain[7] Chip[62] middle Temp = 83
- Done read temp on Chain[7]
- set FAN speed according to: temp_highest=73 temp_top1[PWM_T]=73 temp_top1[TEMP_POS_LOCAL]=73 temp_change=1 fix_fan_steps=0
- FAN PWM: 94
- read_temp_func Done!
- CRC error counter=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement